From the Sector

With its new sustainability label Autoneum Blue, Autoneum combines the use of recycled materials with protecting the oceans and social responsibility. Autoneum Blue is a continuation of the LABEL blue by Borgers®, which was originally launched by Borgers Automotive. Following the acquisition of the German automotive supplier in April 2023, Autoneum has now fully integrated the label into its sustainable product portfolio.

Marine pollution has reached alarming levels in recent decades, with plastic contamination posing one of the most harmful threats to the health of the world’s largest ecosystem. In light of ever-stricter legal requirements for the environmental performance of vehicles, especially regarding the recycled content of components and their end-of-life recyclability, the reduction and recycling of plastics is also one of the key challenges for the automotive industry. Autoneum Pure, the Company’s sustainability label for technologies with an excellent sustainability performance throughout the product life cycle, is already successfully helping customers to tackle these challenges. With Autoneum Blue, Autoneum is now expanding its sustainable product portfolio with a label for components that combine the use of recycled material with protecting the oceans and social responsibility.

In order to qualify for the Autoneum Blue label, components must be based on materials that consist of at least 30% recycled PET that was collected from coastal areas within a 50-kilometer range of the water. These credentials mean the products make an important contribution to preventing plastic pollution in the oceans. In addition, the process of collecting the PET bottles must be socially respon-sible and comply with human rights, and traceable procurement of the bottle flakes must be guaran-teed. Autoneum Blue thus complements the Company’s strategic target to continuously reduce water consumption in all areas of its operations with an additional focus on preventing plastic pollution of the oceans.

Autoneum currently offers selected wheelhouse outer liners, needlepunch carpets and trunk side trim under the Blue label. In principle, however, the label could be extended to any product based on Autoneum technologies that feature recycled polyester fibers. As an addition to Autoneum’s existing fully recyclable monomaterial polyester constructions, which are characterized by waste-free production and have a significantly lower carbon footprint compared to products made from virgin fibers, Autoneum Blue presents another example of the Company’s ongoing efforts and continuous strides towards a sustainable circular economy.

David Herberg, Vice President Engi-neering EMEA at automotive supplier Adient, has been named Rising Star 2022 in the Engineering category by Automotive News Europe magazine.

Every year since 2010, Automotive News Europe has recognized talents in the European automotive industry for their outstanding careers and special achievements in the service of their company and the industry as a whole. To be eligible, candidates must have a minimum of ten years’ experience in the industry, speak at least two languages and be aged 45 years or younger at the time of the nomination.

"The 19 people we are honoring this year are special," said Luca Ciferri, Associate Publisher & Editor of Automotive News Europe. "They’ve made it to the top from a pool of more than 130 candidates, making this year's selection process the most competitive in the history of the award."

Herberg, graduate industrial engineer and aged 45, looks back at a career spanning more than ten years at Adient, a leading supplier of seating systems for the automotive industry. After several years at the management consultancy McKinsey and various management positions at Adient as well as its predecessor Johnson Controls, Herberg has been responsible for around 1,200 employees in the development of seat structures, trim and complete seating systems since May 2020.

For more than 50 years, vehicle manufacturers have relied within their model development on Autoneum’s measuring systems for vehicle acoustics. With ATLAS, Autoneum has now added another particularly powerful device to the portfolio: Thanks to the efficient and reliable measurement methodology, noise-reducing vehicle components and materials can be analyzed and developed faster and with a significantly lower need for resources in the future.

With the ongoing electrification of vehicles and trends like autonomous driving, future car generations will no longer be used solely for transport – remote working and recreation will equally play a key role. This requires a vehicle interior that is as noiseless as possible. In order to identify and insulate potential internal and external sound sources already in the pre-development of new models, car manufacturers around the world rely on Autoneum’s highly specialized measurement tools. The newly launched ATLAS – short for “Airborne Transmission Loss Analysis System” – measures the acoustic insulation and transmission loss of components such as carpets, inner dashes and floor insulators. This allows customers to assess noise-reducing parts within minutes and select acoustic components tailored to their needs.

ATLAS sets new testing standards in this regard. While developers previously had to analyze the NVH behavior (noise, vibration, harshness) of interior parts using material samples of around one square meter in size, ATLAS makes this process faster, cheaper and more environmentally-friendly. It enables measurements of small samples with a diameter of no more than ten centimeters, which substantially decreases the amount of material used. Thanks to its four highly sensitive microphones, only two trials are required to collect precise and valid test data, making the system developed at Autoneum’s research center in the Swiss city of Winterthur especially suitable for quality assurance and repeatability of the results obtained. Users also benefit from time savings of up to 50 percent compared to the previous testing standard.

Autoneum’s measurement systems represent the global industry standard and are used successfully by vehicle manufacturers, automotive suppliers and research institutions alike. The Company is therefore not only making a significant contribution to the mobility of the future with its noise-reducing products, but now with ATLAS as well.

• Lectra contributes to Faurecia Seating Business Group Industry 4.0 readiness and “digital enterprise” transformation initiative

Paris, September 26, 2017 – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the renewal of its partnership with Faurecia through the signing of a global agreement for its Seating Business Group.

The cutting process for the production of seat covers, headrests and interiors is an increasingly strategic part of Faurecia’s Seating activity. Faurecia Seating supplies vehicle complete seats, frames, mechanisms and trim covers to major carmakers worldwide, whose manufacturing processes are gradually evolving toward Industry 4.0.

Faurecia Seating aims to double the production of its existing manufacturing facilities by reinforcing operations with advanced manufacturing technologies. The company’s extended partnership with Lectra entails focusing on operational excellence initiatives across its automotive seating division.

Standardization of the Vector® fabric-cutting solution—endowed with preventive and predictive maintenance capabilities and the highest-performance cutting system available on the market to date—will be instrumental to the implementation of these initiatives throughout the division’s fabric cutting facilities. Faurecia currently has more than 60 Vector fabric cutting solutions in production worldwide.

“More than ever, we face major challenges in terms of flexibility, agility and productivity—producing more while reducing costs,” observes Hagen Wiesner, Executive Vice President, Faurecia Seating. “Our cutting processes have become strategic in reaching these goals. Faurecia’s ‘digital enterprise’ project aims to achieve operational excellence in virtually every aspect of our organization. Together with Lectra, we will make this a reality in the cutting room, with smart automation and predictive maintenance”.

“Given the profound transformations gripping manufacturing, helping our customers ready their operations for the Fourth Industrial Revolution has become without question our core mission,” remarks Daniel Harari, Lectra Chairman and CEO. “Faurecia is among the automotive suppliers at the forefront of this movement. Digital technologies and industry expertise are the business enablers that will allow manufacturers to connect inside and outside the value chain in the near future.”