From the Sector

International technology group ANDRITZ has received an order from Sioen Technical Felts to supply a complete needlepunch line for its production plant in Liège, Belgium. The new line will enable Sioen to produce heavy fabrics in a single step.

Sioen’s Liège plant specializes in the production of technical fabrics used mainly in industrial applications such as pipe lining (CIPP), acoustics, and filtration. The ANDRITZ equipment will allow the customer to produce fabrics of more than 3,500 gsm in a single step, using different types of fibers (recycled PET, OxPan, bicomponent,…) and finenesses. Normally two or three layers have to be needled off-line in a second step to achieve such a fabric weight.

The single-step process results in a higher quality end product by minimizing the risk of delamination, i.e. the separation of layers during use. It also increases productivity by reducing the need for fabric handling.

The ANDRITZ DF-4 needleloom, which can operate in double and single stroke modus, gives Sioen high flexibility to process fabrics with different mechanical charasteristics. Operators can easily switch modes via the remote-control touch screen. The line will be equipped with ANDRITZ’s latest fabric weight profiling technology, ProWin™, to ensure maximum weight evenness.

Start-up of the new needlepunch line is scheduled for Q1 2025.

The Here|After event in Los Angeles, conceived by Denim Dudes' Amy Leverton and writer/prdoucer Erin Barajes, was a sucess. Powered by ISKO, this gathering took place at the Neuehouse Hollywood.

The event featured presentations and a dynamic panel discussion, spotlighting innovations in raw materials. Denim Dudes captivated the audience with their F/W 2025 forecast.

Moderated by Kate Nishimura of Sourcing Journal, the “The New Raw Materials For A Reimagined Supply Chain” panel included industry experts: Keith O’Brien, Senior PR Manager, ISKO, Nava Esmailizadeh, Head of Brand, Ambercycle, Mark Little, Product Creation/Environmental Responsibility, Patagonia and Jane Palmer, CEO of Nature Coatings.

They explored advancements in material science and circular systems, reimagining the future of the supply chain.

Commenting on ISKO’s use of textile-to-textile fibers from RE&UP, Keith says, “The integration of Next-Gen fibers is just one part of it. Turning those materials into beautiful and fashionable products that last is something else, and that’s what ISKO is great at.”

Unter dem Leitthema „Intuition“ lädt die MUNICH FABRIC START am 3. und 4. September 2024 die Modebranche ein, sich auf ihre innere Stimme zu besinnen.

Die kommende MUNICH FABBRIC START wird auf einer Gesamtfläche von 42.500 Quadratmetern erneut zu einem Treffpunkt der europäischen Modeszene. Die Veranstaltung vereint Designer, Produktverantwortliche und Modemacher, um in den circa 1.000 Kollektionen internationaler Premium-Hersteller die neuesten Trends für die Saison Herbst/Winter 2025/26 zu entdecken. Mit einer klaren Struktur und einem fokussierten Angebot in den acht Bereichen – ADDITIONALS, FABRICS, ReSOURCE, BLUEZONE, DESIGN STUDIOS, KEYHOUSE, SUSTAINABLE INNOVATIONS sowie THE SOURCE – bietet die MUNICH FABRIC START einen Überblick über relevante Entwicklungen der Modeindustrie.

Eines der Highlights der MUNICH FABRIC START wird das Live-Event von Li Edelkoort sein, das als Private Lecture am 4. September 2024 von 11:00 bis 13:00 Uhr im MOC München stattfinden wird. Als anerkannte Trendforscherin wird Edelkoort Einblicke in die kommenden Modetrends geben und ihren Trend Forecast für Fashion, Textiles und Colour der Saison Autumn.Winter 2025-26 vorstellen. Zudem wird die Messe durch die Laufzeitverkürzung von drei auf zwei Tage effizienter gestaltet, was den Bedürfnissen der Branche nach fokussierteren Events mit kürzeren Reisezeiten entgegenkommt. Die Messe richtet sich damit an den aktuellen Markttrends, den Bedürfnissen der Aussteller und Besucher sowie den Veränderungen in den Reise- und Budgetgewohnheiten der Branche aus.

Innovativ gestaltete Trendforen und Präsentationen bieten einen Überblick über die neuesten Entwicklungen. Die MUNICH FABRIC START ist damit erneut eine All-in-One-Sourcing-Lösung, die das gesamte Mode-Ökosystem an einem Ort vereint.

AUSBLICK AUF DIE VIEW: 26. + 27. Juni 2024
Zum Saisonauftakt auf der VIEW Premium Selection werden nächste Woche mehr als 260 Kollektionen für Autumn/Winter 25/26 in den Segmenten FABRICS, ADDITIONALS, DENIM und SPORTSWEAR in der Interim Location am Karlsplatz Stachus gezeigt. Neben zahlreichen weiteren Herstellern sind Achille Pinto, Akin Tekstil, Almodo, Balli Rafanelli Bold, Barth & Könenkamp Seiden, Calik Denim, Cervotessile since 1815, Clerici Tessuto, Davaris Textiles, Dutel Creation, Elyaf Tekstil, Emmetex/Masterloom, Erica + Compagnia Della Seta, Eton Textile, Fitecom, Fortex, Jackytex, Liberty Fabrics, Limonta, Lisa, Lyria, Malhia Kent, Mario Bellucci, Milior, Nova Fides, Özdoku, Riopele, Sharabati Denim, Sidogras, SMI, Takisada, Teijin Frontier, Tessuti di Sondrio, Texapel, Viscotex, Weft, We Nordic Label Studios vor Ort in München.

The KARL MAYER GROUP founds a production company in Romania and hires Patrick Mack as an additional General Manager.

In October 2023, the KARL MAYER GROUP founded a production company in Romania to make itself more resilient and strengthen its competitiveness. KARL MAYER ROMANIA S.R.L. will initially start production in Baia Mare, which were rented in February 2024. A move to a new factory building in the neighbourhood is planned in the future.

In May of this year, Patrick Mack took up his position as General Manager at the Romanian subsidiary of KARL MAYER. He will be supported in his tasks by Manfred Reinhold, also at the head of KARL MAYER ROMANIA. Patrick Mack will manage the business locally.

The German-American has already set up a factory for a foreign company in Romania and has a clear idea of his new role: "KARL MAYER ROMANIA is of extreme strategic importance. That is why I want to build a site that fits seamlessly into the manufacturing footprint of the KARL MAYER GROUP. The new production facility should fulfil all KARL MAYER standards, contribute to the improvement of the company as a whole and represent it accordingly," explains Patrick Mack.

Dibella is making life easier for its textile service customers with a new service: on request, hotel textiles can be ordered with Datamars transponders directly ex works. The chips are permanently available at the Dibella warehouse - the goods are delivered fully equipped.

To relieve its customers, Dibella now offers a new RFID-based laundry tracking service: On request, the company equips textiles ex works with LaundryChips (RFID tags), from Datamars (CH). Dibella is cooperating directly with the Swiss company for this unique service. Customers do not have to worry about ordering or providing the tags - saving them time and effort.

Cost advantage
This new system offers a cost advantage because: It is much more cost effective to send large batches of chips bundled together for production than to make hundreds of shipments per year for each individual order. Handling costs are increasing and shipping costs, especially overseas, have risen immensely. In addition, the customs authorities in some countries are very strict when it comes to importing chips, and this new system also minimizes the risk of customs-related delivery delays.

Transponder data as a future service
Another service is already in the pipeline: Dibella will soon offer the option of directly reading out the LaundryChips in its main warehouse and providing them as a CSV file together with the delivery note. This will eliminate the work step of scanning new goods for the textile service - when the goods arrive, the CSV file is simply entered into the system and can then be fed directly into the laundry cycle.

As there are different chip systems from company to company, this solution cannot be implemented directly for all textile service companies - but Dibella wants to develop further.

Benefits of RFID for laundries and their customers
The RFID technology not only improves efficiency, reduces losses and increases profitability in the laundry industrial process. RFID also improves the quality of service that the textile services can offer to their customers, thanks to a more efficient workflow and instant data exchange between textile services and their customers. No more worries or discussions about lost textiles: the customer knows exactly how many and which pieces have arrived/departed from/to the laundry. In this way, transparency with the customer is improved and invoicing can be based on reliable data. In addition, portable RFID readers allow for automated and quick daily inventory at the customer’s site to request clean textiles from the laundry on time.

CARBIOS and TOMRA Textiles, a tech venture set up by the sorting technology company TOMRA, announce the signing of an agreement to collaborate on establishing an efficient stream in Northern Europe from textile waste collection, sorting and preparation to recycling using CARBIOS’ enzymatic depolymerization technology at its first commercial plant currently under construction in Longlaville, France

The monomers obtained will be used to produce recycled polyester (r-PET) fiber, closing the loop for polyester textile circularity.

The innovations from both TOMRA Textiles and CARBIOS contribute to addressing critical gaps in the value chain and significantly increase textile-to-textile recycling from its current rate of 1%¹. By accelerating a circular economy for polyester, a sustainable alternative to incineration or landfill is made available.

TOMRA Textiles is on a mission to close the gap in textile circularity, by contributing to designing and scaling textile sorting plants. Under this partnership agreement, TOMRA Textiles will explore specific, tangible measures to enable the preparation of post-consumer polyester waste for biorecycling according to CARBIOS’ specifications.

CARBIOS' biorecycling technology involves breaking down polyester fibers into their basic components using enzymes, which are then used to produce high-quality recycled PET materials such as fibers for the textile industry. The breakthrough collaboration with TOMRA will redirect the challenging PET fraction of polyester textile waste towards biorecycling, showcasing a mutual dedication to pioneering recycling solutions for a circular economy.

¹ Ellen MacArthur Foundation, 2017

INDA, the Association of the Nonwoven Fabrics Industry, applauds the U.S. House of Representatives for passing the Wastewater Infrastructure Pollution Prevention and Environments Safety (WIPPES) Act (H.R. 2964). The WIPPES Act, which creates national standards for “Do Not Flush” labeling for non-flushable wipes, passed out of the House Committee on Energy and Commerce in December of 2023, and on June 12, it cleared the House floor in a bipartisan vote. The bill now awaits consideration in the Senate Science, Commerce, and Energy Committee.

This bipartisan legislation is intended to address the growing problem of sewer system clogs caused by improper disposal of consumer wipes that are not intended to be disposed of in toilets. This federal solution is the result of a years-long industry collaboration with wastewater operators which has resulted in the passage of similar legislation in seven states. The WIPPES Act will create a national standard based on existing state laws to ensure non-flushable wipes will carry prominent “Do Not Flush” labeling on packaging.

“INDA has championed this legislation for the past two years and we are encouraged to see it pass out of the House. We extend our thanks to the bill sponsors, our industry and wastewater partners, and INDA members as we take another step forward to make “Do Not Flush” labeling nationwide,” said Wes Fisher, Director of Government Affairs.

The WIPPES Act lead sponsors in the House are Representative Lisa McClain (R-MI) and Representative Mary Peltola (D-AK) and the bill was introduced in the Senate by Senator Jeff Merkley (D-OR) and Senator Susan Collins (R-ME).

Portuguese textile entrepreneur, Mario Jorge Machado, has been elected President of EURATEX during its General Assembly on 14 June. The Assembly also nominated Alberto Paccanelli as Honorary President.

Mario Jorge Machado has an extensive career in textiles. Mario is currently a shareholder and director of "Adalberto Textile Solutions, S.A.", where he applies advanced management practices to boost competitiveness and innovation. He has been president of the Textile and Clothing Association of Portugal (ATP) since 2019, and he stands out for his strategic leadership in the textile and clothing sector, promoting innovation and sustainability. He represents ATP on the Board of CIP - Confederação Empresarial de Portugal and chairs CIP's strategic council for the environment and sustainability.

With a degree in Production Polymer Engineering from the University of Minho, his expertise ranges from continuous process improvement to the development of B2B commercial teams and B2C business models. His vision encompasses operational excellence and the implementation of sustainable practices, contributing to the evolution of the textile industry.

The Assembly also nominated Alberto Paccanelli as Honorary President, recognising over a decade of commitment to EURATEX and the European textile industry.

EURATEX General Assembly also elected 4 other members of the Presidency Team: Michael Kamm (ZWILLING Gruppe, Germany), Barbara Cimmino (Yamamay, Italy), Grégory Marchant (UTT, France) and Ismail Kolunsag (Cross Tekstil, Turkey). During the Assembly, EURATEX also welcomed new memberships from CEMATEX and Forschungskuratorium Textil e. V., and a partnership with Reju. (France).

Beaulieu International Group is investing €5 million to transition the fossil based energy supply of its Cushion Vinyl production plant in Wielsbeke, Belgium, to bio mass generated steam supply. A transition to renewable energy. To this end, B.I.G. is collaborating with A&U Energie, a company that converts non-recyclable wood waste into green energy and heat. This strategic move aligns with B.I.G.'s commitment to reach ‘net zero’ for their operations by 2030.

The transition from fossil energy to green steam and the switch to waste gas treatment without direct fossil energy brings significant benefits. First, the switch in technology will lead to 88% reduction in their Belgian Cushion Vinyl carbon footprint related to heat supply and waste gas treatment, compared to the current emissions. Second, the use of steam heating and electric energy provides improved energy efficiency. In addition, the use of steam systems is known for its safety and reliability, providing a safer and more stable heating solution for the Belgian Cushion Vinyl facility. Moreover, the switch to steam and electric energy allows for the use of green electricity in the future, if available.

In addition to transitioning to 100% green energy, Beaulieu International Group is also dedicated to advancing the circular economy. These efforts encompass various initiatives, including increasing the use of recycled and reused materials. For example, 50% of B.I.G.'s PVC floor coverings are already fully recyclable. Additionally, they are actively working to reduce the environmental impact of their solutions by 42% at the end of their life cycle, striving to minimize product emissions to nearly zero, and eliminating pollutants. Recently at the Belgian Flanders Flooring Days, Beauflor launched its Twilight collection, a cushion vinyl floor created with PVC from 100% bio and circular sources resulting in a 40% reduced CO₂ footprint compared to their conventional heterogeneous CV flooring for residential applications

Furthermore, their cushion vinyl brand Beauflor launched the ReLive concept, a specialized program designed for a circular future, ensuring the collection, sorting, and recycling of PVC flooring cutting waste. Currently, this program focuses on post-installation waste and is exclusively available in France, with the goal of expanding its reach to other EU countries.

Through the establishment of strategic partnerships dedicated to finding innovative ways to repurpose waste materials previously slated for incineration, B.I.G. underscores its commitment to sustainable solutions and collaboration with like-minded organizations. 75% of B.I.G.'s post-industrial waste is now being successfully recycled.

The Lectra Group company announced a new collaboration between TextileGenesis, the textile traceability platform and the Forest Stewardship Council (FSC®). It will enable the implementation, via the TextileGenesis platform, of new solutions to ensure the traceability of cellulose fibers from responsibly managed forests.

In fashion, many textiles such as viscose, lyocell and modal use man-made cellulose fibers. These fibers are themselves made from wood pulp, the production of which can contribute to deforestation.

Founded in 1994, the Forest Stewardship Council (FSC®) is an international NGO whose mission is to promote responsible forest management worldwide. In particular, the organization offers certification for products and raw materials which have been obtained from wood grown in responsibly managed forests, and comes from supply chains where social rights of workers, communities and indigenous peoples have been safeguarded.

Amit Gautam, founder and CEO of TextileGenesis, explains: "We've already been working with Man Made Cellulosic Fiber Producers for several years to facilitate, thanks to our blockchain-inspired technology, the traceability of fibers manufactured by the most virtuous producers, and we've integrated their analysis criteria into our platform. By also becoming an FSC® partner today, we're taking things a step further. This new collaboration will support companies in the traceability of FSC certified fibers and support the administration and data management of FSC Chain of Custody certification. All players in the value chain will benefit from increased transparency and much more reliable upstream data. Fashion brands will be able to demonstrate much more easily that their garments use textiles made from responsibly sourced man-made cellulose fibers."

Fabian Farkas, FSC International Chief Commercial Director, adds: “We are seeing a rapid increase in interest in FSC certification from the textile industry, marking a very positive trend. Through this collaboration with TextileGenesis, we aim to simplify the administrative part of FSC certification for companies within the textile supply chain by automating many required data processes. Our goal is to empower brands to identify opportunities for seamless progress in meeting their FSC procurement policies.”

Following the signature in October 2023 of a memorandum of understanding with the International Cotton Association (ICA) and the launch last January of two consortiums with footwear and leather players, and more recently the announcement of its partnership with the Aid by Trade Foundation (AbTF), the initiator of The Good Cashmere Standard® (GCS), TextileGenesis confirms, with this new collaboration with the FSC®, its central place in the ecosystem of players mobilizing for more sustainable and responsible fashion.