From the Sector

At ITMA 2023, XORELLA, a specialist in steam setting and conditioning equipment for yarns and fabrics, will launch XO AUTOMATION for the double door XO SELECT conditioning machine series, and XO SOLID, a new machine series to complement XO SMART, XO TREND and XO SELECT machines.

XO AUTOMATION
The new XO AUTOMATION system consists of roller conveyor systems for loading and unloading two-door XO Select conditioning machines. Additional pallet wrapping machine with a turntable, weighting station, label printer, safety fence and security system can complete the system. The XO Select controller and automation system can handle and store individual customer-specific material and packing programmes.  

XO SELECT and XO AUTOMATION are designed for yarn steaming on multiple pallet dimensions and heights up to 2,650mm. The linear material flow passing conveyor and steaming machine avoids any mix between steamed and un-steamed materials. XO AUTOMATION fills the gap between the XO automated moving platform and the fully automated transport system – from spinning hall to warehouse.

XO SOLID
The new cubical XO SOLID combines a high loading space of 1,800mm x 1,700mm x 4, 000mm (H x W x L) through double row pin trolleys or pallets for easy manual loading of six units on floor level without a pit or platform. XO SOLID is therefore designed for installations on upper floor levels. The new frame design combines all necessary components factory preinstalled on a single frame, for easy ‘plug and play’ installation at the customer site. Additional smaller steamer dimensions for two and four loading units are also at the planning stage.

The new XO SOLID incorporates all the renowned features of XORELLA machines based on the long term experience in high temperature dyeing vessel production of FONG’s, including:

• A Siemens controller with OPC UA interface and XO data tool for batch storage.
• A XO EcoPac waterless claw pump or two-stage water ring vacuum pump.
• A high energy efficient accumulator for steam, electric and combined heating.
• Vessel and piping in world-class stainless steel.
• European key components such as pumps, heating elements, valves and sensors

Established in Switzerland in 1967, XORELLA became known in the global textile industry for its innovative indirect steaming system. Since 2002 the company has been a member of the CHTC Fong’s International Group, and a member of SINOMACH Group (China National Machinery Industry Corporation) since 2019.

Sustainable solutions provider Perstorp has turned its ambitious sustainability targets for 2030 into actionable roadmaps on the corporate level as well as for each of its production plants, outlining hands-on activities to lower greenhouse gas emissions, reduce waste, save fresh water and enable sustainable transformation throughout the value chain.

Over the last year, Perstorp has presented ambitious sustainability targets for greenhouse gas emissions (Scope 1, 2 and 3), as well as for water and waste, to be reached by 2030. The company has now supplemented those targets with roadmaps outlining the steps and actions needed to fulfil them and support customers in reducing their carbon footprint as well as lead Perstorp toward its long-term ambition of becoming Finite Material Neutral.

The largest greenhouse gas emissions are found in Scope 3, which includes raw materials and end-of-life treatment of Perstorp’s products. The Scope 3 roadmap includes the steps necessary to drive the transition of the product portfolio from fossil-based to more sustainable, lower carbon footprint alternatives. This, in turn, will help enable Perstorp’s customers to achieve their own sustainable transition. One key project in this roadmap is Project Air, an initiative aiming to replace all the fossil methanol that Perstorp uses in Europe with methanol produced from residue streams such as carbon capture and utilization (CCU) and renewable sources like biogas. This alone is expected to reduce carbon dioxide emissions by 500,000 tons per year.

The corporate Scope 1 & 2 targets (direct greenhouse gas emissions from Perstorp´s production plants and purchased energy), as well as the targets for water and waste, have been broken down into local targets and roadmaps, firmly anchored in the specific prerequisites for each production plant.

Initiatives on reducing energy consumption and shifting to energy from non-fossil or recovered sources can, for example, be found in the local roadmaps, while the steps to reach those targets are tailored specifically to each location. Among the planned local activities are also initiatives to replace fresh water used in the production with purified wastewater and to find different ways to reuse and recycle waste from production.

Since 1 April 2023 sales and service of Mayer & Cie. circular knitting machines in Bangladesh have been under new management. A new dynamic team “Mayer Bangladesh” has been formed. Mayer & Cie.’s longstanding Indian representative Batliboi has joined business activities in Bangladesh since the beginning of the month, supported by the team of Brady Services and by Almani Biz.

In Batliboi, Mayer & Cie. has set up a business partner of many decades standing as its representative in Bangladesh. For around 40 years Mumbai-based Batliboi has overseen sales and service of Mayer & Cie. circular knitting machines in India. Abhay Sidham heads Batliboi’s Textile and Machinery Group. He and his team have many years of experience in strategic marketing, and a focus on sustainability and processing recycled raw materials is part of Batliboi’s expertise.

These competences are of relevance in the Bangladesh market because “we face strong competition from Asian manufacturers here,” as Wolfgang Müller, Mayer & Cie.’s sales director, explains. The premium market was growing smaller, and the trend was toward specialities – value-added fabrics, spacer fabrics and athleisure with a high proportion of elastic. Mayer & Cie. sees in these requirements significant potential for its machines – and in Batliboi a partner able in view of its experience to put them to optimal use.

One building block in the set-up of Mayer & Cie. representatives is unchanged. Brady Services will continue with Batliboi to contribute its close ties with the local market. A significant number of existing companies will continue to be looked after by Brady Services.

The new member in Mayer Bangladesh team is Dhaka-based Almani Biz. A lubricants specialist for circular knitting machines Almani Biz has a wide network with Bangladesh knitting industry.

Mayer & Cie. feels well positioned by this new set-up. “We,” Wolfgang Müller says, “are of the opinion that the market for textile machinery in Bangladesh will continue to grow and we are confident that by strengthening our sales, service and marketing team we will be able to make good use of this opportunity.”

Customers in Bangladesh have placed large orders in the past. The latest, placed in January, was for several dozen machines to be delivered this autumn. Further orders from Apex and BEXIMCO (Bangladesh Export Import Company) are also scheduled for delivery in the second half of 2023.

While reorganising the set-up of its representatives in Bangladesh Batliboi has also taken over as Mayer & Cie.’s representative in Nepal, where the company had previously had no local representative. There is a demand for machines for interlock, 8-lock and single jersey, but sales are still in single figures.

Freudenberg Performance Materials (Freudenberg) is expanding its product portfolio by adding an elastic variant of its flexible superabsorbers for modern wound dressings. These superabsorbers increase the comfort level for patients as well as enabling longer wear time, thus reducing the frequency of dressing changes. Further highlights at EWMA include components for more sustainable wound care, PU foams with directly applied silicone adhesives, antimicrobial systems and an innovative hydrophilic debridement foam. The global manufacturer will be welcoming visitors to Exhibition Stand from May 3 – 5 at EWMA 2023.

Freudenberg uses a new technology to manufacture the elastic superabsorbers. Unlike other methods, this technology does not perforate or slit the material, thus achieving a high degree of consistent elasticity. Furthermore, the technology used by Freudenberg bonds the superabsorbent fibers more uniformly with the material, thus enhancing the integrity of this layer in the wound dressing.

Further highlights
Freudenberg is also presenting the M 1714 wound pad component, one example of a sustainable solution that simultaneously delivers on performance. The dressing consists of bio-based fibers and exhibits a smooth wound contact layer. M 1714 has been evaluated for industrial compostability and conforms to ISO 13432. This enables certification of product biodegradability. Further highlights to be presented in Milan include material systems for the antimicrobial treatment of chronic wounds, including systems that do not use active substances.

Wound dressing with silicone adhesive border
With Freudenberg’s silicone coated foams, manufacturers can reduce the number of process steps, thereby avoiding waste, saving energy and simplifying the supply chain. Compared with conventional foam dressings, the Freudenberg foam product also offers higher flexibility for optimal wound bed contouring and reduces the risk of infection by preventing exudate pooling. Freudenberg is showcasing the prototype of a bordered dressing with a silicone adhesive border. In addition, the variant with an extra-strong silicone border enables longer wear time while at the same time ensuring minimal adherence to new skin that forms at the wound edges.

More effective cleansing results and greater patient comfort
Freudenberg is also showcasing an innovative hydrophilic debridement foam. It is ideally suited for use in wound cavities, offers better cleansing results and reduced risk as well as greater patient comfort.

The first set of coloured carbon fibre bike wheels made a debut public appearance at The Cycle Show at Alexandra Palace.

Developed in partnership with leading wheel brand Parcours, the Chrono carbon fibre wheels feature a gold finish made of Hypetex’s Zlatan uni-directional material and offer a lighter and higher-performance product than the traditional painted alternative.

Hypetex is a sustainable colouring technology for advanced materials, such as carbon fibre. Born out of Formula 1 racing, its patented paint-replacing process is a key step in advancing the lightweight revolution. Combining water-based eco-resins with a sustainable curing process, Hypetex materials are made with bold, colourful aesthetics as well as technical and cost-saving benefits.

Parcours is a leading wheel brand that offers high-performance, premium wheelsets that employs the latest advancements in aerodynamic technology. The Parcours X Hypetex gold wheels were featured at The Cycle Show in London on a bespoke Handsling A1R0evo, which was nominated for the Jaw Droppers trophy - a competition for the industry’s most striking designs.

Shareholders Adopt All Motions Proposed by the Board of Directors

• Distribution of a dividend of CHF 1.50 per share approved
• Remuneration Report 2022 and future remuneration of Board of Directors and Group Executive Committee formally accepted
• All members of the Board of Directors who stood for re-election were elected
• Thomas Oetterli newly appointed to the Board of Directors
• KPMG newly elected as statutory auditors
• Amendments to the Articles of Association approved

On April 20, 2023, 325 shareholders, who represent 66.2% of the share capital, attended the 132nd Annual General Meeting of Rieter Holding Ltd.

Dividend
The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 1.50 per share. The dividend for the 2022 financial year will be paid on April 24, 2023.

Annual Report, Financial Statements, Consolidated Financial Statements and Remuneration Report
The shareholders also adopted all other motions proposed by the Board of Directors, namely approval of the annual report, financial and consolidated financial statements for 2022. Moreover, they formally approved the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review.

By way of a consultative vote, the shareholders also approved the Remuneration Report 2022.

Remuneration of the Members of the Board of Directors and the Group Executive Committee
In two separate binding votes, the proposed maximum total remuneration of the members of the Board of Directors and the Group Executive Committee for the 2024 financial year was approved.

Re-Election of the Members of the Board of Directors
The Chairman of the Board, Bernhard Jucker, and the Directors, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi, Sarah Kreienbühl and Daniel Grieder were confirmed for a further one-year term of office. In addition, Thomas Oetterli was newly elected to the Board of Directors for a term of office.

The members of the Remuneration Committee who were standing for election –
Hans-Peter Schwald, Bernhard Jucker and Sarah Kreienbühl – were likewise re-elected for a one-year term of office.

Election of KPMG as Statutory Auditors
The shareholders also adopted the proposal of the Board of Directors to elect KPMG AG, Zurich, as new statutory auditors for the financial year beginning January 1, 2023.

Amendments to the Articles of Association
The shareholders further approved the proposals of the Board of Directors to amend the Articles of Association of Rieter Holding Ltd., in order to implement the requirements of the reform of the Swiss company law, which came into force on January 1, 2023.

Viscose speciality fibre manufacturer Kelheim Fibres, nonwoven producer Sandler, and hygiene product manufacturer pelzGROUP have jointly developed a new panty liner that is plastic-free according to the European Single-Use Plastics Directive (SUPD). This innovative solution is a step towards reducing the amount of plastic in hygiene products – and thus also a contribution to tackling the problem of plastic pollution.

According to a UNEP study on marine litter and microplastics, eight million tons of plastic end up in the oceans every year. A significant portion of this pollution comes from single-use plastic products, including conventional period products such as pads or panty liners.

The partnership between the three companies was formed under the Open Innovation principle, which allowed for creative idea exchange and facilitated the development of an innovative product. According to Jessica Zeitler, R&D Specialist at Sandler, “Our collaboration with Kelheim Fibres and pelzGROUP is a great example of how companies can work together to create solutions that benefit both the environment and consumers. We are proud to be part of this project and the opportunities it offers.”

For hygiene product manufacturer pelzGROUP, it is important to combine sustainability and performance to achieve broad acceptance in the market. “Our panty liner meets the strict requirements of the European Single-Use Plastics Directive (SUPD) while also matching the performance of conventional synthetic products. At the same time, our new panty liner has a completely European supply chain. This means short distances and therefore low CO2 emissions, and – especially in times of global disruption – reliability for our customers,” emphasizes Dr. Henning Röttger, Head of Business Development at pelzGROUP.

"Our viscose speciality fibres are an environmentally friendly and high-performance alternative to synthetic materials," says Dominik Mayer, Project Manager Fibre & Application Development at Kelheim Fibres. "They are at the very beginning of the product value chain and yet have an enormous impact on the functionality of the end product. Open innovation allows us to bring all partners in the value chain to the table, to find the best solution together in a very short time and bring it to commercialisation - the collaboration with Sandler and pelzGROUP is an important milestone in our AHP journey."

Lotus Teknik Tekstil A.Ş., Türkiye, has successfully started up a complete line to produce nonwoven roll goods for biodegradable, plastic-free wet wipes. This line has been delivered, installed, and commissioned by international technology group ANDRITZ.

The neXline wetlace CP line combines the benefits of two technologies: wetlaid and spunlace. Natural fibers are processed gently to create a high-performance and sustainable wipe. This next-generation wipe, called Newipe®, combines the benefits of spunlace fabric, in particular remarkable strength in all directions, with the biodegradability and softness of a WetlaceTM fabric. It is produced with a lower carbon footprint, has a low lint rate, and does not generate dust during production.

Lotus Teknik Tekstil A.Ş. is a leading nonwoven roll good producer and a member of a group company. The group company consists of 4 companies that operate end-to-end manufacturing including nonwovens, cardboard packings, plastics, and finished wet wipe products. Headquartered in Istanbul, Sapro is the leader in Türkiye and one of the four leaders in the manufacturing of wet wipes in Europe. The company produces, converts, and supplies 161 million sheets of wipes per day for personal, household, and industrial use, exporting 70% of its production to 65 countries all over the world. Sustainability plays a prominent role in Sapro’s business strategy.

SABIC will present its portfolio of PURECARES™ and TRUCIRCLE™ materials for the healthcare and hygiene market at INDEX™23 from April 18 to 21 in Geneva, Switzerland, under the theme of ‘Collaborating for sustainability and innovative solutions’.

At INDEX, SABIC will highlight a joint project with two market leaders, using certified circular polymers from the TRUCIRCLE portfolio in recyclable films for feminine hygiene, baby care and disposable medical applications. In all of these cases from diapers to surgical drapes and medical gowns, the sustainable materials can serve as direct drop-in alternatives with no compromise in production efficiency and product performance.

Further examples on display at the company’s booth will feature TRUCIRCLE solutions for facemasks, including an N95 design that localizes the value chain with SABIC® PURECARES PP spunbond and meltblown polymers in Saudi Arabia. SABIC provides complete solutions for facemask production as part of its localization strategy and has been a key enabler of the Saudi Made initiative. Also shown will be a closed-loop facemask developed in collaboration with industrial and research partners in Europe.

The company’s PURECARES polyolefin products are based on technologies free of both tris (nonylphenyl) phosphite (TNPP) and phthalates. Consumer comfort is achieved by using SABIC polypropylene (PP) and polyethylene (PE) polymers for bi-component fibers to answer multiple needs for soft and loft handfeel nonwovens, enabling easy lamination to other building blocks on medical nonwovens or absorbent hygiene applications.

In addition, SABIC produces TRUCIRCLE certified circular polymers for its PURECARES PP and PE portfolio with feedstock based on advanced recycling of mixed and used plastic that would otherwise typically not be suitable for mechanical recycling processes. These more sustainable solutions can be adopted in downstream processes as direct drop-in alternatives to incumbent materials with no compromise in production efficiency, purity and product performance.

Kornit Digital LTD. announced to unveil its new Smart Curing and Rapid SizeShifter solutions at TecStyle Visions 2023. Kornit Smart Curing is an intelligent and adaptive solution significantly streamlining curing processes while delivering high-quality results. Additionally, the introduction of Rapid SizeShifter eliminates time-consuming direct-to-garment pallet changes typically required to address disparate applications.

Kornit’s new energy-efficient Smart Curing solutions include Orion for mid-level production, and Titan for higher-capacity volumes – both optimized for compatibility with Kornit Atlas MAX systems and based on field-proven solutions from the acquisition of Tesoma. These highly efficient curing systems sync production and finishing for an end-to-end process that reduces both energy consumption and total cost of ownership (TCO). Kornit’s Rapid SizeShifter for Atlas MAX is an adjustable pallet that quickly adapts to disparate application requirements – reducing costly downtime associated with pallet changes and streamlining production for accelerated time-to-market.