From the Sector

• Business situation remains poor and unchanged
• Manufacturers show prudence in forecasting future developments

 
According to ITMF’s Global Textile Industry Survey (GTIS) conducted in the middle of September 2023, survey participants exhibited a cautious sentiment regarding the current business situation. The indicator for the business situation stood at -27 percentage points (pp, see Graph 1) because companies in the entire textile value chain were struggling with rising costs and weak demand. Business expectations have remained unchanged since July at around +20 pp (see Graph 2). They have jumped into positive territory in January 2023 based on the assumption that the Chinese economy would give an additional boost, but this hope did not materialise. The analysis indicates that a hard landing of the global economy is not in sight.

Order intake recovered in May 2023, but flattened in July and remained very weak in September (-28 pp). The entire textile value chain is running on minimum levels of orders. As long as brands and retailers do not increase orders, the entire value chain will continue struggling. Order backlog slightly increased globally, from 1.9 months in July to 2.2 months in September 2023. This indicator had been on a falling trend since the end of 2021. The average capacity utilisation rate dropped again globally (69%). Textile manufacturers expect this rate to remain low in six months’ time as well.

Weakening demand has been the major concern in the global textile value chain for a year. In September 2023, this concern grew even stronger due to high inflation rates measured in the last few months, a phenomenon fueled by high energy and high raw material prices. Nevertheless, participants seem not to be concerned by order cancelations and inventory levels remain average along the textile value chain. 

Members of TMAS – the Swedish Textile Machinery Association – will be taking part in the forthcoming ITMA Asia + CITME exhibition, taking place from November 19-23 2023 at the National Exhibition and Convention Centre in Shanghai, China.

Weaving
In the area of weaving, 93% of the 114,000 new looms delivered in 2022 went to Asia, according to the latest figures from the International Textile Manufacturers Federation (ITMF), with China the top destination, followed by India.
As a result, TMAS members like Vandewiele Sweden AB and Eltex have a huge market to address that has been established over many decades.

Vandewiele Sweden AB benefits from all of the synergies and accumulated know-how of the market-leading Vandewiele Group, supplying weft yarn feeding and tension control units for weaving looms to the majority of weaving machine manufacturers. It also retrofits its latest technologies to working mills to enable instant benefits in terms of productivity and control.

Yarn and sewing thread monitoring
With nearly 70 years of expertise in yarn sensor technology, Eltex of Sweden AB has been at the forefront of new product development. Its EYE and EyETM systems are capable of accurately and efficiently monitoring the movement and tension of more than 1,000 yarns simultaneously. These systems are suitable for various applications and fibre types, including warping, winding, multiaxial weaving and new material applications.

Eltex sewing tension monitors, such as the ETM422, have been well-received by customers. This device can monitor the tension of sewing threads in real time, effectively improving the quality and safety of sewn products. Particularly in China's rapidly growing automotive manufacturing sector, the ETM422 has seen widespread use to meet the industry’s escalating demands for product safety and quality.

Dyeing and finishing
“Digitalisation, automation and AI have become the key enablers for sustainable gains across the entire textile industry and so much has been achieved in the past few years, especially in terms of automation,” says TMAS secretary general Therese Premler-Andersson. “One area in which TMAS members are really making a difference right now, is in replacing water and energy-intensive technologies for the dyeing and finishing processes with new digital technologies.”

The TexCoat G4 non-contact spray technology for textile finishing and remoistening, for example, will be showcased in Shanghai by Baldwin. It not only reduces water, chemicals and energy consumption, but also provides the flexibility to adapt to a customer’s requirements in terms of single and double-sided finishing applications. The TexCoat G4 can reduce water consumption by as much as 50% compared to traditional padding application processes.

The FoxCore founding team and the ITM at TU Dresden aim to usher in a new era for fastening solutions in lightweight construction with the start of the Exist research transfer project FoxCore. The project started on June 1, 2023, and will run until November 30, 2024, with support from the German Federal Ministry of Economics and Climate Protection (BMWK) and the European Social Fund (ESF).

The innovative company is to develop and offer new and customer-oriented fastening solutions for lightweight construction applications. Safety and performance of lightweight solutions in various industries are to be increased. FoxCore's objective is to take a leading role in fastening technology.

Daniel Weise, Philipp Schegner, Michael Vorhof and Cornelia Sennewald form the FoxCore team; they will work closely with the Institute of Textile Machinery and Textile High Performance Materials (ITM) at TU Dresden. Together, they will develop optimal manufacturing technologies and establish a widespread network of customers and suppliers.

• Revenue of EUR 1.25 bn and EBITDA of EUR 136.5 mn in the first half of 2023
• EBITDA and net result for the period significantly improved compared with the first quarter of 2023
• Cost-cutting program and measures to strengthen sales activities being implemented as planned
• Liquidity position strengthened by successful capital increase and extension of credit terms
• Production of TENCEL™ brand modal fibers successfully launched in China

The business performance of the Lenzing Group, a leading global supplier of specialty fibers for the textile and nonwoven industries, largely reflected the subdued market trends in the first half of 2023. After the market environment deteriorated significantly in the second half of 2022, signs of recovery were evident during the first and second quarters of 2023 in terms of both raw material and energy costs as well as demand. Textile fibers recorded improving demand, and business with nonwoven fibers and with dissolving wood pulp proved to be very stable.

Outlook
The war in Ukraine and the more restrictive monetary policy pursued by many central banks in order to combat inflation are expected to continue to influence global economic activity. The IMF warns that risks remain elevated overall and forecasts growth of 3 percent for both 2023 and 2024. The currency environment is expected to remain volatile in the regions of relevance to Lenzing.

This market environment continues to weigh on the consumer climate and on sentiment in the industries relevant to Lenzing. Recently, however, the outlook brightened somewhat according to a global survey by the ITMF.*

In the trend-setting market for cotton, signs are emerging of a further buildup of stocks in the current 2022/23 crop season. Initial forecasts also see a further buildup of stocks in 2023/24, albeit to a lesser extent.

However, despite signs of recovery in both demand and raw material and energy costs, earnings visibility remains limited overall.

Lenzing is fully on track with the implementation of its reorganization and cost-cutting program. These and further measures are aimed at positioning Lenzing in the best possible way for the expected market recovery.

In structural terms, Lenzing continues to anticipate growth in demand for environmentally responsible fibers for the textile and clothing industry as well as the hygiene and medical sectors. As a consequence, Lenzing is very well positioned with its “Better Growth” strategy and plans to continue driving growth with specialty fibers as well as its sustainability goals, including the transformation from a linear to a circular economy model.

The successful implementation of the key projects in Thailand and Brazil as well as the investment projects in China and Indonesia will further strengthen Lenzing’s positioning in this respect.

Taking into consideration the aforementioned factors and assuming a further market recovery in the current financial year, the Lenzing Group continues to expect EBITDA in a range between EUR 320 mn and EUR 420 mn for 2023.

*Source: ITMF, 21st Global Textile Industry Survey, July 2023

During the second quarter of 2023, the orders index for textile machinery, as compiled by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped significantly compared to 2022 April – June 2022 period (-30%). In absolute terms, the index stood at 85.1 points (basis 2015=100).

This drop is the result of a reduction in the collection of new orders recorded by manufacturers both domestically and on foreign markets. The decrease in orders in Italy amounted to 21%, whereas a 31% downtrend was observed abroad. The absolute value of the index on foreign markets settled at 81.9 points, while in Italy it stands at 117.2 points. New orders for the second quarter amounted to 4.1 months of guaranteed production. ACIMIT’s data also shows that the use of production capacity by Italian manufacturers was 70% for the first half of 2023. This percentage is expected to remain stable for the second half of the year.

ACIMIT president Marco Salvadè stated that, “The orders index for the second quarter elaborated by our Economics Department clearly shows a decline in new orders both in Italy and abroad compared to the previous year. The decline that usually precedes an event such as ITMA, the international textile machinery exhibition held last June in Milan, however, is part of a negative trend that has been going on for several quarters”.

Uncertainty appears to be weighing heavily especially on markets abroad, where foreign trade statistics updated to the first quarter of 2023 are marked by a slackening in Italian sales in some important reference markets, such as Turkey, China, the United States and Pakistan.

Salvadè added that, “Feedback from over 400 Italian companies that took part in ITMA is positive. It’s now necessary for the many contacts made during the event to materialize and for the demand for machinery in the main textile machinery markets to resume a path towards growth.”

SHIMA SEIKI MFG., LTD., together with its Brazilian representative BRASTEMA TECNOLOGIA TÊXTIL LTDA., will host the Tech Fashion shows, a series of private exhibitions held at two locations in Brazil in July and August. The exhibitions will be a showcase for the company’s latest computerized flat knitting technology, presented through fashion shows, machine exhibits and the latest knit samples featured at ITMA 2023. The event is organized by the Fashion Committee of Fitemavest, consultants to Brazil's fashion market, and will feature presentations by CS DESIGN STUDIO designer Cecilia Seibel.

Technological displays include a full lineup of SHIMA SEIKI flat knitting machines, ranging from the MACH2XS WHOLEGARMENT® knitting machine to N.SVR122 computerized shaping machine, as well as the SFG-I fully automated glove knitting machine. Exhibited machines vary between locations. Details are given below under ‘Exhibited Technology.’

The potential of each of these knitting machines are maximized in combination with the SDS®-ONE APEX4 3D design system and APEXFiz® design software. At the core of the company’s "Total Fashion System" concept, SDS®-ONE APEX4 and APEXFiz® provide comprehensive support throughout the apparel supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design to production and even sales promotion. Especially effective is their capability to improve on the design and evaluation process with virtual sampling. Ultra-realistic simulation capability on SDS®-ONE APEX4 and APEXFiz® allows virtual sampling to minimize the amount of time, cost and material spent during the sample-making process

The fashion show will feature the newest creations in WHOLEGARMENT® and other knitwear.

Finishing machinery specialist Monforts has secured a number of major orders from textile manufacturers in Central and South America recently, and was pleased to welcome a high number of visitors from the region to its stand at ITMA 2023 in Milan from June 8-14.

Among new orders are those for three Montex stenters delivered to the AustralTex Group in Argentina and a further Montex range to denim manufacturer CIT in Brazil. Guatemala’s Global Textiles placed an order for its second Montex stenter, while Mexico’s Zentrix ordered its third and Avante, also in Mexico, has opted for its sixth.

Elsewhere, orders have also been placed for the delivery of three new Montex stenters to one of Pakistan’s major corporations, as well as a new Thermex dyeing range to nonwovens manaufacturer Orsa in Italy. Further orders – both for new machines and retrofit modules – are now anticipated following ITMA 2023, which attracted over 111,000 visitors to Milan.

“Visitor footfall at ITMA 2023 was well beyond the company’s expectations, and we were especially pleased at the constant number of visitors from South American companies, as well as from Asia and Europe,” said Monforts Marketing Manager Nicole Croonenbroek. “We were able to provide them with detailed information about our portfolio of machines and technologies digitally and fielded an unprecedented number of serious enquiries, many of which promise to turn into new business.”

Monforts Montex stenters for processes such as drying, stretching, heat-setting and coating, she added, are already the industry standard for the fabric finishing industry, providing a number of advantages in terms of production throughput and especially in energy efficiency and resource savings. Other key technologies in the Monforts portfolio include relaxation dryers, Thermex dyeing ranges and Monfortex compressive shrinking ranges.

Montex®Coat
“We were also very pleased with the interest in the Montex®Coat, the latest addition to our range of technologies, which we displayed in Milan,” Croonenbroek said.

The Montex®Coat can serve a very diverse number of markets and enables full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments, as well as solvent coatings. Knife coating, roller coating or screen printing can also all be accommodated with this system. It provides the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

Many refinements have been made to the Montex®Coat in the past few years, resulting in higher coating accuracy and the resulting quality of the treated fabrics. A number of advanced new improvements were introduced in Milan, including automatic edge limiters for immediately adapting to new coating widths and a new and simplified hand-held control device. These save considerable time in setting up the machine and ensuring consistent production.

The Montex®Coat unit displayed in Milan was sold to Vietnamese company Thai Tuan during the show.

From circular knitting machines and braiders via upgrades to digital solutions, Mayer & Cie. presented at ITMA 2023 a wide range of solutions that make circular knitting machines and braiding machines even more durable and thereby more valuable, for which the long-established firm received a positive visitor response.

From machinery manufacturer to solution provider
Three circular knitting machines – a Relanit 3.2 HS, an SF4-3.2 III and the OVJA 2.4 EM – and an MR-15/18C/Single Deck braiding machine took up about half the floor space of Mayer & Cie.’s ITMA stand. That reflected the weighting of the trade fair presentation. Along with high-tech circular knitting and braiding products the Mayer & Cie. focus at this year’s ITMA was on solutions that increase the value and durability of its machines. Including the digital platform knitlink, the new Control 5.0 machine control system, the camera-assisted error recognition system knithawk, almost a dozen upgrade kits for existing machines and the new oiler system Senso Blue RS.

Trade fair debut for Mayer & Cie. braiding machine
Mayer & Cie. also exhibited a braiding machine at ITMA for the first time. The company has integrated the braiding division at is Albstadt headquarters since 2019. “Braiding machines are a part of textile machinery,” said Mayer & Cie. Managing Partner Benjamin Maye, “but we nevertheless saw presenting the MR-15/18C/SD braider at ITMA as an experiment – and are satisfied with the result. The machine attracted a great deal of attention and we were able to make interesting contacts.”

A positive conclusion on ITMA 2023
Expectations of this year’s ITMA were moderate, Benjamin Mayer said. “War, high energy prices, inflation and recession are the signs of the times. Not even an ITMA is going to change that.” In addition, there had been serious problems with the issue of visas that had made it impossible for many potential visitors to attend the trade fair.

The Mayer & Cie. management therefore judged its success not by the general demand but by the positive visitor feedback. “For us that was an indicator of our future competitiveness,” said CEO Benjamin Mayer, “and we can definitely be sure of that with our developments.”

Kornit Digital LTD., a leader in sustainable, on-demand digital fashion and textile production technologies, announced the Company successfully concluded its exhibition at ITMA 2023, experiencing high volumes of engagement with new customers from key regions, such as India, Turkey, China, Central and South America.

With its industry-first vibrant new NeoPigment™ Vivido digital inks, the Kornit Presto MAX had a strong reception at ITMA. Also taking center stage was the anticipated Kornit Apollo platform, which delivers on the industry need for automated, high-throughput digital on-demand garment decoration at scale. Built on tested Kornit MAX technology, the Apollo effectively brings sustainable digital production to the mainstream.

“Our Apollo system was welcomed at ITMA by an industry now realizing that digital is the only solution for making fashion and textile production sustainable, producing closer to the end consumer, eliminating problematic inventory, and delivering the highest quality without sacrificing profitability,” said Omer Kulka, Chief Innovation Officer at Kornit Digital.

Just in time for ITMA 2023 in Milan, the flat knitting machine manufacturer STOLL has launched its new collection COLOR IN KNITTING. It holds a range of knitting techniques that were ideated for novel super fine machine gauges such as the E20.

In addition, STOLL reveals its internal design workflow, showcasing how digital software tools can speed up the design process. The core of this is k.innovation CREATE DESIGN. Through the utilization of STOLL’s jointly developed design software solution, k.innovation CREATE DESIGN, in collaboration with @KM.ON, the shape and structures of a garment, can be digitally created, allowing for its simulation before it is even knitted. The interfaces to various external 3D software tools, allow for a realistic representation of the garment facilitating faster design decisions. Once the virtual knits, made in the CREATE DESIGN software are ready for manufacturing, it will be send to a knitting technician for further processing in k.innovation CREATE PLUS, This significantly speeds up product development while reducing communication issues between designers and technicians.

Sustainability and responsible handling of precious natural resources were key factors driving the development of the latest trend collection, COLOR IN KNITTING. STOLL-knit and wear®, a technique that stands for seamless knitted garments, can play a significant role in reducing waste. In addition, fewer process steps are required in the production chain - with advantages for production efficiency.
For another highlight of COLOR IN KNITTING, the STOLL creatives have worked on imitating different yarn effects with knitting technology such as slub yarn optics or the simulation of fabrics like crepe de chine/crepe georgette

On the occasion of the 150th anniversary of STOLL, COLOR IN KNITTING features a selection of vintage pattern replicates. These patterns can be found in STOLL’s extensive sample archives in Reutlingen. It is impressive to learn that all these former fabric constructions can still be replicated today and also reinvented with todays machine features. This approach showcases the steep progression of technical advancements over the past 150 years.

STOLL´s latest trend collection culminates in the creation of an invaluable resource: the book “Color in Knitting: By Designers, for Designers”. This publication aims to cater to a diverse audience by presenting a comprehensive guide to designing with colors using various flat knitting technologies and will be presented in the chapter "Book release".