From the Sector

From the drinking water and food industries through water management and mining to the automotive and aviation sectors, mechanical filtration processes are used in almost every industry. As different as the methods, dimensions and special requirements of the filtration process are in each case – technical textiles and often tubular filters are almost always used. This means that tubular filters and narrow textiles by vombaur contribute to the safe and reliable separation or treatment of substances in the widest variety of filtration processes.

Individual solutions
The requirements placed on the textile, the material, the flow rate and the loading capacity of the filters depend on the respective use: a tubular for dewatering soil needs to withstand different forces than a tubular filter for the beverages industry. On the other hand, the latter needs to meet the highest hygiene standards. Because the requirements are so individual, vombaur develops customised filtration textiles for its customers all over the world.

Seamless tubular filters
At vombaur, filter media are round woven seamlessly on unique looms. As a result, they have identical surface properties all around and over the entire length, such as flow rate, loading capacity, shrinkage behaviour or material thickness

Narrow textiles for fabricating filter media
"We manufacture our narrow textiles from a wide variety of high-tech yarns. Sometimes monofilament yarn is used, sometimes multifilament, sometimes spun yarn. Like the type of weave, we select the raw materials depending on the function they need to fulfil," emphasises Gert Laarakker, Sales Manager at vombaur. "So that our filtration textiles reliably perform the job they are supposed to perform. Clean. Safe. Sturdy."

Reflecting the pandemic-related drop in worldwide vehicle production, Autoneum’s revenue in local currencies fell by –18.7% in 2020, although the second half of the year saw a significant market recovery. Group revenue in Swiss francs fell by –24.2% year-on-year to CHF 1 740.6 million. For the full year 2020, the EBIT margin will be around 1.5% and the free cash flow slightly over CHF 100 million.
At the Annual General Meeting on March 25, 2021, the Board of Directors will propose Liane Hirner and Oliver Streuli for election to the Board of Directors of Autoneum Holding. Peter Spuhler will not stand for re-election.

At 74.5 million, the number of light vehicles produced globally in 2020 was down –16.2% compared to the previous year, where around 89 million vehicles were manufactured. Autoneum’s revenue in local currencies decreased by –18.7% in 2020, pretty much in line with the negative market dynamics. The somewhat stronger decline of revenue compared to the market results from a lower share of Asia in Autoneum's total revenue. Impacted by the appreciation of the Swiss franc against the most important currencies for Autoneum, the consolidated revenue dropped in 2020 by –24.2% to CHF 1 740.6 million. The heterogeneous development of the first and second half of the year was characteristic for the pandemic-driven automotive year 2020. Worldwide lockdowns and production stoppages at vehicle manufacturers led to a market slump in the first six months and a corresponding loss in revenue for Autoneum. Thanks to the subsequent market recovery and catch-up effects in the second half of the year, revenue improved considerably compared to the first half of the year.

Revenue development in Asia and SAMEA region significantly better than market
While revenues in local currencies of the highest-volume Business Groups Europe and North America decreased by –25.6% and –19.3% respectively, reflecting the regional, pandemic-driven market development (Europe: –22.9%; North America: –20.1%), Business Group Asia almost held its prior-year level with an organic decline of only –2.1% in 2020 thanks to the strong upturn in automobile production in China in the second half of the year and despite the fact that the number of vehicles produced in Asia fell by –11.4%.*

Personnel changes to the Board of Directors
At the Annual General Meeting on March 25, 2021, the Board of Directors of Autoneum Holding will propose Liane Hirner and Oliver Streuli for election as new members of the Board of Directors.
Liane Hirner has been CFO and member of the Management Board of Vienna Insurance Group, based in Vienna, Austria, since 2018.*

Oliver Streuli, a Swiss national, has been CEO of PCS Holding, based in Frauenfeld (Canton Thurgau), Switzerland, since 2019.*

Peter Spuhler has been a member of the Board of Directors of Autoneum since 2011 and will not stand for re-election at the Annual General Meeting on March 25, 2021.*

*See attached document for further informationen

Mit Relive-1 lanciert Autoneum einen innovativen Tuftingteppich, der höchsten Ansprüchen an nachhaltige Mobilität gerecht wird. Die mit dem «Autoneum Pure.»-Label für besondere Umweltfreundlichkeit ausgezeichnete Tuftingtechnologie für die Kompaktbis Premiumklasse ist gegenüber dem in diesen Fahrzeugsegmenten üblichen Teppichstandard zudem langlebiger und überzeugt mit einer exzellenten Reinigungsfähigkeit.

Die globale Nachfrage nach innovativen Fahrzeugen der Zukunft und nachhaltigen Mobilitätsformen steigt. Automobilhersteller und Zulieferer fokussieren sich in der Fahrzeugentwicklung entsprechend verstärkt auf ressourcenschonende Leichtbaukomponenten und Produktionsprozesse. Darüber hinaus sind Optik und Haptik der Passagierkabine ausschlaggebend für die Kaufentscheidung, da das Auto in Zukunft verstärkt für Arbeit und Erholung genutzt wird. Hier beeinflussen Teppichsysteme durch ihre Grösse die Qualitätswahrnehmung entscheidend. Mit Relive-1 bietet Autoneum neu eine Premiumtechnologie für Fahrzeugteppiche an, die nicht nur mit ihrem ästhetischen Erscheinungsbild punktet, sondern auch eine überdurchschnittliche Umweltbilanz aufweist. Unter anderem überzeugen Teppiche aus Relive-1 durch einen besonders nachhaltigen Einsatz von Rohmaterialien: So werden für die Herstellung der Teppichfasern nur rezyklierte PET-Flaschen verwendet. Autoneum verwertet diesen Rohstoff wieder, schont so natürliche Ressourcen und verringert Plastikmüll – und sorgt gleichzeitig dafür, dass aus ausgedienten PET-Flaschen neue, hochwertige Teppichsysteme für kommende Fahrzeuggenerationen kosteneffizient produziert werden können. Darüber hinaus stellt Relive-1 einen bedeutenden Schritt zu Monomaterial-Konstruktionen und somit zu einer abfallfreien Fertigung von Tuftingteppichen dar.

Gleichzeitig steht Relive-1 einmal mehr für die überdurchschnittliche Produktqualität von Autoneum: Im Vergleich zu Standardteppichen der Kompakt- bis Oberklasse sind Relive-1-Teppiche dank signifikant höherer Abriebfestigkeit robuster und durch die vertikale Ausrichtung der Fasern sowie wasserabweisende Wirkung des Polyesters leicht zu reinigen. So können kleine Partikel wie Holzsplitter, Staub oder Steine, aber auch Flüssigkeiten problemlos und ohne Rückstände entfernt werden, was ein entscheidender Vorteil bei häufig in der Freizeit genutzten Fahrzeugen wie SUVs ist. Die Verbindung von herausragender Leistung und Nachhaltigkeit definiert heute bei Fahrzeugen der Premiumklasse den neuen Luxusstandard.

The coronavirus pandemic and its massive impact on the automotive industry led to an un-precedented market slump in the first half of 2020 and a corresponding revenue decline at Autoneum. Revenue in local currencies fell by –32.7% compared to the prior-year period, and in Swiss francs by –36.8% to CHF 730.6 million. The turnaround program for the North American sites made further progress in the first six months and is showing the targeted results. However, they were clearly overcompensated by the massive impact of the corona-virus crisis, which led to a negative net result of CHF –54.9 million despite comprehensive cost flexibilization measures.

Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production completely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.

 Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production com-pletely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.

Autoneum promptly responded to the pandemic-related market slump by adopting extensive cost-cutting measures in all regions. These include the reduction of employee costs by, among other things, adjusting time accounts, introducing short-time work at eligible locations and temporary layoffs as well as headcount reduction, mainly among temporary workers. In addition, operating expenditures were limited to the absolutely necessary. The investment volume for 2020, already reduced from previous years, was downsized even further. Autoneum continues to benefit in this regard from the high level of investments undertaken in recent years.

 Although the coronavirus crisis and the measures taken to contain it dominated Autoneum’s course of business in the first half of 2020, the Company achieved necessary operational and financial im-provements during this period. The comprehensive turnaround program for the North American sites made further progress and is on track. Efficiency improvements already achieved there had a posi-tive effect on the figures of the first half-year, but were significantly overcompensated by the substan-tial impact of the COVID-19 crisis. Savings and cost flexibilization measures taken immediately and implemented worldwide in view of the revenue loss could not offset the ongoing, capacity-related fixed costs. This led at the Group level to a negative EBIT of CHF –31.8 million (prior-year period: CHF 16.4 million), which equates to an EBIT margin of –4.4% (prior-year period: 1.4%). The net result decreased because of the severe revenue shortfall to CHF –54.9 million (prior-year period: CHF –6.0 million).

Outlook
For 2020 Autoneum expects revenue to develop at market level. Although customers’ production volumes should increase again in the second half of 2020 compared with the first semester, latest fore-casts indicate that they will remain clearly below the level of the second half of 2019. Immediately implemented and ongoing cost reduction measures as well as further operational optimizations also within the turnaround program in North America will lead to improvements in the second half of the year. Due to the current uncertainties, a reliable statement on the net result for the full year 2020 thus cannot be made. With regard to the mid-term targets, a recovery of the profitability level is expected, but it will largely depend on the market development.

Thanks to numerous new ramp-ups and the favorable portfolio of vehicle models supplied, Autoneum grew organically by 2.5% in a declining market. Adjusted for currency effects, Group revenue in Swiss francs amounted to CHF 2 297.4 million, 0.7% higher compared to the previous year.

For the second consecutive year, fewer vehicles were manufactured worldwide in 2019 than in the prior year. In particular, the persistently weak global economy and ongoing trade disputes have had an impact on vehicle demand. With only about 89 million vehicles produced, the market shrank by almost –6% compared to 2018. Despite this negative trend, Autoneum achieved an organic revenue growth of 2.5% through numerous production ramp-ups and a favorable mix of vehicle models supplied. Revenue consolidated in Swiss francs rose by 0.7% from CHF 2 281.5 million to CHF 2 297.4 million.

Revenue growth in North America, Asia and SAMEA region significantly above market The Business Groups North America, Asia and SAMEA (South America, Middle East and Africa) not only outperformed the negative market trend in each case, but also reported higher revenues compared to the previous year. In Europe only, the drop in automobile production caused a decline in revenue of the corresponding Business Group by –5.6% in local currencies. Business Group North America improved its revenue by 7.2% on a currency-adjusted basis, primarily driven by various production ramp-ups of German and Japanese vehicle manufacturers. Despite considerably fewer vehicles being produced in Asia, the Business Group increased its revenue in local currencies by 8.1% thanks to high-volume and new programs of European and Asian automobile manufacturers. Business Group SAMEA continued its growth course. Against the market slump in this region, revenue in local currencies and adjusted for inflation rose by 32.7%. This was mainly due to high-volume export programs in Turkey and South Africa as well as much higher production volumes compared to the previous year in the key SAMEA market of Brazil.

China is the world’s undisputed front-runner in the global car market, leading the way in both production and sales. 2018 saw 27.8 million vehicles produced and domestic sales of 28.1 million, and while these numbers were down slightly year-on-year, the opportunities for global textile producers are still unrivalled given the overall size of the market. These opportunities can best be explored at this year’s biennial China International Nonwovens Expo & Forum (CINE – supported by Techtextil), which runs from 3 – 5 June in Shanghai.
While CINE features nonwovens & nonwoven products, machinery for nonwovens and raw materials & chemicals for nonwovens for a wide range of applications, it is the potential in the automotive sector that is generating a lot of talk before this June’s event. And considering only around 50% of demand for automotive textiles is met by domestic output, the opportunities for imports from overseas suppliers is high.

While new car sales in China dropped for the first time last year since 1992, production still reached 27.8 million vehicles, including 23.5 million passenger cars and 4.3 million commercial vehicles. Furthermore, strong growth is still evident in new energy vehicle (NEV) sales, as well as exports of all vehicle types. NEV production totalled 1.27 million units last year, a staggering 60% increase, while sales grew by nearly 62%. More e-vehicles are sold in China than rest of the world combined, while the government recently set a target of selling 7 million e-vehicles by 2025, ensuring growth in this sector will remain robust for some time. Exports of all vehicle types in 2018 did not grow as fast as NEVs, but the 1.04 million vehicles produced for overseas markets last year still represented growth of 16.8%.

Premium automotive industry buyers attend CINE
Given CINE’s strong reputation in the Chinese nonwovens sector, a number of leading automobile brands, and textile suppliers to these companies, source at the fair. Previous buyers have included Autoliv, Honeywell, Johnson Controls, Lear Corporation, Lydall, Toyota Boshoku, Volkswagen, Wangbo Co Ltd and more.

This edition, buyers such as these can source from a range of automotive nonwovens suppliers. This includes Shanghai Shenda, one of the country’s largest producer of automotive textiles, who will group together a number of automotive interior suppliers.

This year the fair will take place in a new venue, the Shanghai Convention & Exhibition Center of International Sourcing, located conveniently between Hongqiao airport and downtown Shanghai. Visitor registration for the fair is now open and can be accessed here: http://vis.eastfair.com/CINEPCEN/reg.aspx.

This September’s Cinte Techtextil China will once again provide a strong barometer of the state of the global technical textiles industry, and in particular which sectors in Asia as a whole, and China specifically, are performing well. Two of these for certain are Buildtech and Mobiltech, with a number of leading global and Chinese brands exhibiting to eager buyers from these sectors.

Cinte Techtextil China is Asia’s leading biennial fair for the technical textiles and nonwovens sector, and will feature an expected 500-plus total exhibitors from around 20 countries & regions from 4 – 6 September. The fair offers products and technologies for 12 application areas* which cover the entire industry.

Buildtech benefits from Belt & Road and other infrastructure investment

With a huge boom in national and regional infrastructure projects, the market for Buildtech products, especially geotextiles and construction textiles, is rapidly expanding. In particular, the government’s global Belt & Road project, as well as continued investment at home in highways, high-speed rail and more, is fuelling this expansion. According to CNITA, in 2017 China started 35 new railway projects, with additional private capital investment in this sector totalling some USD 53 billion that year. The same investment in highway construction increased 17.7%, while water conservation project investment by private firms reached a new record of USD 105 billion.

With this potential in the Asian market, it’s no surprise a number of new exhibitors will feature in the Buildtech sector at the fair, including FPC Technical Textile from Saudi Arabia, Kobe-cz from the Czech Republic, as well as Lenzing Plastics, while Johns Manville are one of the returning exhibitors this year.

• FPC Technical Textile (Saudi Arabia) produce high-end specialty fabrics including PVC coated fabrics and fibre glass PTFE fabrics, and will focus on the latter at the fair.
• Kobe-cz (Czech Republic) will showcase their nonwoven fabrics, mainly from glass fibre with temperature resistance up to 800°C.
• Exhibiting for the first time at the fair with their Plastics division, Lenzing (Austria) will feature their technical laminates for building industries, roofing membranes, vapour barriers, isolation facings and barrier packaging, as well as PROFILEN® PTFE yarns, films and fibres at Cinte Techtextil.
• Johns Manville’s (US) products on offer include polyester spunbond, PP & PBT meltblown, glass fibre nonwovens, micro glass fibre nonwovens, hybrid nonwovens, glass fibre needle mat and glass microfibers.

Mobiltech benefits from huge increases in automobile production in China

With new textile innovations and application possibilities spreading throughout the automobile industry, coupled with the fact China is the world’s largest auto producer, Cinte Techtextil is the place to see the latest products and technologies for this sector this September. Automobile production in China reached 29 million units in 2017, an increase of 3% year-on-year. Staggeringly, new-energy vehicle production grew by 53% last year, while SUVs and commercial vehicles increased 13.81% and 13.95% respectively.

With such strong growth in China, a number of leading international Mobiltech producers, as well as top domestic suppliers, will be at Cinte Techtextil this year, including:

• Abifor (Switzerland): their focus at the fair is on products designed for automotive, construction and other technical applications, in particular their specialty hot-melt powders. The company has its own production unit in Shanghai, and reports that an increasing number of domestic customers are starting to focus on more sophisticated products.
• SKS Group (Sweden): will showcase high performance single end yarn for automotive and industrial hoses, and single end cord for automotive and industrial belts.
• Swisstulle (Switzerland): will have a range of products on offer for automotive, rail and aviation uses, including sunshade materials, nets, tube reinforcements and new possibilities for luggage compartment covers.
• Windel Textile Far East (Germany): with production undertaken in China, this German firm offers textile greige, half-done and finished materials. They offer nonwoven, knitted and woven fabrics (substrates), and glass fibre solutions. At the fair, they will showcase substrates for adhesive tapes / wire harnessing tapes, and Maliwatt- and coagulated microfibre fleece for covering vehicle interiors.
• Protechnic (France): they will feature hot melt thermoadhesive nets, webs and films, as well as laminating process in automotive and other industrial applications at Cinte 2018.
• Kuangda Technology Group (China): having supplied products for global brands such as Volkswagen and Audi, this Chinese supplier will offer automotive interiors, including interior fabrics, seat covers and cushions at the fair.
• Shanghai Shenda (ShanghaiTex Group) (China): specialising in automotive interior textiles, they manufacture a full range of products including grey car carpet, moulding car carpet, head liners (warp-knitting and nonwoven), seat belt, seat fabrics and more, and have supplied the likes of Mercedes-Benz, BMW, Volkswagen and GM.

Cinte Techtextil China is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA). To find out more about the fair, please visit: www.techtextilchina.com.