From the Sector

Reset
545 results
Sustainable in many different ways: recycling at Trevira © Trevira GmbH
Sinfineco-Label
05.10.2017

Sustainable in many different ways: recycling at Trevira

Bobingen - On the 4th October 2017 a new brand was introduced at Trevira: Trevira SINFINECO®. This label may be carried by all textiles that contain sustainable Trevira products. Sustainable, innovative, high-value and responsible – these are the values the new brand stands for.

As an industrial enterprise, Trevira is conscious of its special responsibility for an intact environment and has long advocated the recycling of valuable raw materials and waste products. Trevira CEO Klaus Holz: “We at Trevira wish to preserve the environment and at the same time work to create value. These are the criteria of our sustainability concept.“

Creation of the new brand is therefore only a logical step, one that enables customers to label their sustainable Trevira products as such. Trevira is known for the high quality of its products. In every way recycled products are as good as the original materials in terms of quality and performance.

Two vital elements in Pre-Consumer Recycling and an important concept in Post-Consumer Recycling form part of the sustainability strategy of Trevira to conserve resources and maintain value. :

Bobingen - On the 4th October 2017 a new brand was introduced at Trevira: Trevira SINFINECO®. This label may be carried by all textiles that contain sustainable Trevira products. Sustainable, innovative, high-value and responsible – these are the values the new brand stands for.

As an industrial enterprise, Trevira is conscious of its special responsibility for an intact environment and has long advocated the recycling of valuable raw materials and waste products. Trevira CEO Klaus Holz: “We at Trevira wish to preserve the environment and at the same time work to create value. These are the criteria of our sustainability concept.“

Creation of the new brand is therefore only a logical step, one that enables customers to label their sustainable Trevira products as such. Trevira is known for the high quality of its products. In every way recycled products are as good as the original materials in terms of quality and performance.

Two vital elements in Pre-Consumer Recycling and an important concept in Post-Consumer Recycling form part of the sustainability strategy of Trevira to conserve resources and maintain value. :

In the area of Pre-Consumer Recycling, on the one hand, residual materials resulting from the manufacture of polyester fibres and filaments in Bobingen and Guben, dependent on the manufacturing step, are processed in the agglomeration plant and restored to become serviceable primary material. The recyclates are then fed back to our fibre and filament spinning mills, to be made into new top-quality products.

On the other hand, in fibre production there occurs in the manufacture of tow a small proportion of tow that cannot be used for converting and has to be cut out. Instead of selling this material as waste, it is cut up, pressed into balls and then carded / combed by a partner, resulting in a 1A quality product. The GRS certification (Global Recycled Standard) is requested for this. As with converter tow from new material, the recycled tow is mostly incorporated into polyester wool blends (55 % PET / 45 % wool), which are used primarily in corporate wear and uniforms.

In the area of Post-Consumer Recycling, Trevira offers filament yarns consisting of 100 % recycled PET bottles. Our parent company Indorama manufactures very high quality recycled chips from PET bottles. Since only transparent PET bottles are used in Thailand, the flakes and chips are of a particularly good and very uniform quality. The recycled chips, fibres and filaments from Indorama bear the GRS certificates (Global Recycled Standard) and RCS-NL (Recycled Claim Standard). Trevira processes the regranulate made by Indorama from bottle flakes into filament yarns consisting 100 % of recycled material. The filament yarns are available in titres 167 and 76 dtex normal polyester. Alongside technical applications, they are used in the automotive and apparel sectors. In addition, many promising developments with the recycled material are on their way.

SHOWCASE FOR THE INDUSTRY OF THE FUTURE for LECTRA ©Lectra
Lectra
14.09.2017

Showcase for the Industry of the Future for Lectra

The Industry of the Future Alliance (AIF) has awarded Lectra with their ‘Showcase for the Industry of the Future’ label for demonstrating the criteria exemplarity, innovation and commitment. This certification is given to companies who have concretely developed a ground-breaking project to organize their production by leveraging the potential of digital.

The AIF bestowed Lectra with this distinction for its competitiveness concerning cost, quality and delivery times, all obtained thanks to a lean approach and reflection around the design of its products. Further, Lectra received the certification for its competitiveness regarding value, achieved thanks to mastering customer use from which new associated services have flowed. Since 2013, Lectra has invested €86 million in R&D, representing 9.4% of its revenues. This Investment has enabled Lectra to undergo a metamorphosis—based on methodological advances and fundamental technologies—increasing recruitment and growing competitiveness in all of its markets and geographical sectors.

The Industry of the Future Alliance (AIF) has awarded Lectra with their ‘Showcase for the Industry of the Future’ label for demonstrating the criteria exemplarity, innovation and commitment. This certification is given to companies who have concretely developed a ground-breaking project to organize their production by leveraging the potential of digital.

The AIF bestowed Lectra with this distinction for its competitiveness concerning cost, quality and delivery times, all obtained thanks to a lean approach and reflection around the design of its products. Further, Lectra received the certification for its competitiveness regarding value, achieved thanks to mastering customer use from which new associated services have flowed. Since 2013, Lectra has invested €86 million in R&D, representing 9.4% of its revenues. This Investment has enabled Lectra to undergo a metamorphosis—based on methodological advances and fundamental technologies—increasing recruitment and growing competitiveness in all of its markets and geographical sectors.

With ten years’ experience in the industrial internet of things for cutting and expertise in software Solutions to automate and optimize design and product development, Lectra is in an unrivalled position to Support customers as they enter the ‘industry of the future’ era.

Pressure from certain shareholders to relocate manufacturing to China in 2005, triggered Lectra’s industrial project. Following risk analyses—the cost of transport for the European market, the turnover in qualified labor, uncertainty over patent rights and quality—Lectra decided to keep manufacturing in France. This choice was conditional on: disruptive innovation; upgrading; increased value to customers; and a rise in productivity.

The project was accompanied by a well-structured lean approach and organizational changes, which enabled Lectra to achieve the desired level of excellence in terms of productivity and competitiveness.

Some of the changes that took place thanks to this project are as follows: Growth in industrial performance due to an improvement in working conditions, with teams involved in the lean approach; Production engineers involved in creating awareness around factory constraints for a new offer as early as the design process. This co-design product/process optimizes global costs; Emphasis on product, process and logistics’ modularity with the latest possible integration of options (delayed differentiation). This enables logistics’ constraints to be taken into account as early as the engineering phase. Product modularity allows, for example, machines to be put in containers when they might otherwise require special heavy-goods transport.

Lectra’s factory improved its productivity rate by 18 points in three years, and has since maintained it at 89%. Costs have already reduced by 25% and the quality and level of service has improved. In terms of positioning, Lectra has confirmed its leadership in the high-end segment. Lectra has enriched its offer with end-to-end services and innovative, connected products whose embedded intelligence offers Smart Services, notably for predictive maintenance.

Ipsos, Ginetex Ipsos, Ginetex
Ipsos, Ginetex
20.06.2017

In partnership with IPSOS, GINETEX presents the outcomes of its European barometer: "Europeans and textile care labeling"

In partnership with IPSOS, GINETEX presents the outcomes of its European barometer: "Europeans and textile care labeling" 70% of Europeans follow the textile care instructions featured on the labels and 80% admit that they would not (or would rarely) buy clothes without any labels, While another 84% feel concerned by water and energy savings . GINETEX, the international Association for Textile Care Labeling, called upon the French market research company IPSOS, to evaluate the behavior of European Consumers with regards to textile product labels and care symbols. This study, carried out in December 2016, combines the results of six different countries, gathered from a sample of 6,000 people in Germany, England, France, Italy, the Czech Republic and Sweden.
This IPSOS study reveals that 70% of Europeans follow the textile care instructions represented by the symbols. At a pan-European level, 57% even admit that they follow them 'often' and 13% do so 'always'. These figures illustrate the importance of care instructions in the minds of European consumers.

In partnership with IPSOS, GINETEX presents the outcomes of its European barometer: "Europeans and textile care labeling" 70% of Europeans follow the textile care instructions featured on the labels and 80% admit that they would not (or would rarely) buy clothes without any labels, While another 84% feel concerned by water and energy savings . GINETEX, the international Association for Textile Care Labeling, called upon the French market research company IPSOS, to evaluate the behavior of European Consumers with regards to textile product labels and care symbols. This study, carried out in December 2016, combines the results of six different countries, gathered from a sample of 6,000 people in Germany, England, France, Italy, the Czech Republic and Sweden.
This IPSOS study reveals that 70% of Europeans follow the textile care instructions represented by the symbols. At a pan-European level, 57% even admit that they follow them 'often' and 13% do so 'always'. These figures illustrate the importance of care instructions in the minds of European consumers.
- 38% state that they follow these instructions in order to avoid washing problems such as shrinking, in the first place
- 31% follow them in order to preserve their clothes and keep them longer, as a second reason Overall, Europeans consider labels as too cumbersome and 62% admit cutting them out: for 74% of them, the labels itch and irritate their skin and for another 55%, they are often too long and uncomfortable. These results can differ from one European country to another.
However, the presence of the label is a real purchasing criterion since 80% of Europeans state that they would never or rarely buy a piece of clothing without a label.

Source:

GINETEX

Hexcel AGENCE APOCOPE
Hexcel
09.05.2017

Hexcel at SAMPE CHINA 2017

 SAMPE China 2017 takes place in Beijing on May 10-12, 2017 and Hexcel is exhibiting at the event as a leader in advanced composite technologies. At booth #A60 Hexcel’s displays will demonstrate the wide range of composite materials supplied by Hexcel to customers in China.
Display parts will include the A350 XWB rudder skin and belly fairing panel made by Hexcel customer HMC (Harbin Hafei Airbus Composite Manufacturing Center), a joint venture established by Hafei and Airbus in 2009. Since then Hexcel has been a strategic supplier to HMC of composite materials for packages including the Airbus A320 elevator, HTP spar and rudder, and the A350 XWB belly fairing, rudder, elevator and section 19 maintenance door.

 SAMPE China 2017 takes place in Beijing on May 10-12, 2017 and Hexcel is exhibiting at the event as a leader in advanced composite technologies. At booth #A60 Hexcel’s displays will demonstrate the wide range of composite materials supplied by Hexcel to customers in China.
Display parts will include the A350 XWB rudder skin and belly fairing panel made by Hexcel customer HMC (Harbin Hafei Airbus Composite Manufacturing Center), a joint venture established by Hafei and Airbus in 2009. Since then Hexcel has been a strategic supplier to HMC of composite materials for packages including the Airbus A320 elevator, HTP spar and rudder, and the A350 XWB belly fairing, rudder, elevator and section 19 maintenance door.


Other booth displays include HexTow® carbon fiber, a helicopter canopy made from HexPly® prepreg, and a structural sandwich made from HexWeb® honeycomb and HexPly® prepreg.
Hexcel will also display a section of a composite beam manufactured by hot forming Hexcel’s HexPly® M21 UD carbon fiber prepreg. Other promotions include HexFlow® RTM6-2 resin system a 2-component version of HexFlow® RTM6 for resin transfer molding. A number of OEMs have qualified this infusion system designed for aerospace primary structures, which has a high Tg and provides excellent hot/wet performance from a flexible cure cycle. RTM6-2 also has a long shelf life and has no transportation restrictions.

More information:
Sampe China Hexcel China
Source:

AGENCE APOCOPE

Montalvo 70th Anniversary The Montalvo Corporation
Montalvo 70th Anniversary
26.04.2017

Montalvo Celebrates 70th Anniversary

Montalvo, international specialists in web tension control, is celebrating its 70th Anniversary. Since 1947 Montalvo has had one goal: provide Better Web Control; through their products, service, and support. 2017 marks the 70th anniversary of Montalvo. Founded in 1947 by Edwin J. Montalvo Sr., Montalvo carries on the core principle it was built on: build a product right the first time and back it up with the highest quality service and support. From the invention of the dual disc multiple range air brake and clutch for use in continuous unwinding and winding applications to the latest in advanced tension control technology, Montalvo has continuously brought the newest innovations to the industry for 70 years and proudly maintains this tradition. Managing Director Edwin Montalvo says, “Customers know when they work with Montalvo that they are working with some of the industry’s most talented, most knowledgeable, and most experienced individuals.

Montalvo, international specialists in web tension control, is celebrating its 70th Anniversary. Since 1947 Montalvo has had one goal: provide Better Web Control; through their products, service, and support. 2017 marks the 70th anniversary of Montalvo. Founded in 1947 by Edwin J. Montalvo Sr., Montalvo carries on the core principle it was built on: build a product right the first time and back it up with the highest quality service and support. From the invention of the dual disc multiple range air brake and clutch for use in continuous unwinding and winding applications to the latest in advanced tension control technology, Montalvo has continuously brought the newest innovations to the industry for 70 years and proudly maintains this tradition. Managing Director Edwin Montalvo says, “Customers know when they work with Montalvo that they are working with some of the industry’s most talented, most knowledgeable, and most experienced individuals. The respect Montalvo has earned within industry and with its customers continues to drive the company to deliver the finest tension control products, services, and solutions which ensure our customers maximize the performance and capabilities of their applications for years to come.”

Source:

The Montalvo Corporation