From the Sector

Reset
733 results
17.02.2023

FiloFlow & C.L.A.S.S: "Sustainability from A to Z" at Filo

FiloFlow and C.L.A.S.S. join forces and showcase the "Sustainability from A to Z" desk at the upcoming 59th edition of Filo.

Filo and C.L.A.S.S. have always shared the commitment to a tangible sustainability of products and processes of the textile industry. The Yarn Show realizes this through the FiloFlow project, while the international eco-hub founded by Giusy Bettoni demonstrates its commitment through services that support companies in their journey towards responsible innovation.

With this shared commitment, Filo and C.L.A.S.S. are making available to the companies that will join the 59th edition of the Yarn Show a new service dedicated to information and guidance in the field of sustainability.

Within the FiloFlow Area, C.L.A.S.S. will curate the "Sustainability from A to Z" desk, designed to provide companies with an orientation about sustainability matter in textiles: from certifications to environmental impact and end-of-life measurements, the importance of ethics and the energy savings; from responsible innovation to new generation communication.

The 59th edition of Filo takes place on February 22nd and 23rd, 2023 in Milan.

FiloFlow and C.L.A.S.S. join forces and showcase the "Sustainability from A to Z" desk at the upcoming 59th edition of Filo.

Filo and C.L.A.S.S. have always shared the commitment to a tangible sustainability of products and processes of the textile industry. The Yarn Show realizes this through the FiloFlow project, while the international eco-hub founded by Giusy Bettoni demonstrates its commitment through services that support companies in their journey towards responsible innovation.

With this shared commitment, Filo and C.L.A.S.S. are making available to the companies that will join the 59th edition of the Yarn Show a new service dedicated to information and guidance in the field of sustainability.

Within the FiloFlow Area, C.L.A.S.S. will curate the "Sustainability from A to Z" desk, designed to provide companies with an orientation about sustainability matter in textiles: from certifications to environmental impact and end-of-life measurements, the importance of ethics and the energy savings; from responsible innovation to new generation communication.

The 59th edition of Filo takes place on February 22nd and 23rd, 2023 in Milan.

Source:

C.L.A.S.S

(c) Carbios
15.02.2023

Carbios: Four new Board members to strengthen international expertise

  • Carbios strengthens its Board of Directors with the appointments of Prof. Karine AUCLAIR, Sandrine CONSEILLER, Amandine DE SOUZA and Mateus SCHREINER GARCEZ LOPES
  • Carbios has reached its CSR objective of 60% independent directors ahead of 2024 target date, and has increased its female representation

Carbios‘four new members to its Board of Directors:  Prof. Karine AUCLAIR, professor of Chemistry at McGill University, Sandrine CONSEILLER, former CEO of Aigle, Amandine DE SOUZA, General Manager of LE BHV MARAIS, Eataly and Home, DIY and Leisure Purchasing at Galeries Lafayette Group, and Mateus SCHREINER GARCEZ LOPES, Global Director for Energy Transition and Investments at Raizen, have all been appointed members of Carbios’ Board of Directors.  In the new structure, Prof. Karine AUCLAIR succeeds Jacqueline LECOURTIER, Sandrine CONSEILLER succeeds Jean FALGOUX, Amandine DE SOUZA succeeds Alain CHEVALLIER, and Mateus SCHREINER GARCEZ LOPES succeeds Jean-Claude LUMARET.

  • Carbios strengthens its Board of Directors with the appointments of Prof. Karine AUCLAIR, Sandrine CONSEILLER, Amandine DE SOUZA and Mateus SCHREINER GARCEZ LOPES
  • Carbios has reached its CSR objective of 60% independent directors ahead of 2024 target date, and has increased its female representation

Carbios‘four new members to its Board of Directors:  Prof. Karine AUCLAIR, professor of Chemistry at McGill University, Sandrine CONSEILLER, former CEO of Aigle, Amandine DE SOUZA, General Manager of LE BHV MARAIS, Eataly and Home, DIY and Leisure Purchasing at Galeries Lafayette Group, and Mateus SCHREINER GARCEZ LOPES, Global Director for Energy Transition and Investments at Raizen, have all been appointed members of Carbios’ Board of Directors.  In the new structure, Prof. Karine AUCLAIR succeeds Jacqueline LECOURTIER, Sandrine CONSEILLER succeeds Jean FALGOUX, Amandine DE SOUZA succeeds Alain CHEVALLIER, and Mateus SCHREINER GARCEZ LOPES succeeds Jean-Claude LUMARET.

Three of the new members have strong, proven expertise in various industries covering fashion, retail and energy, as well as business development and senior executive management in high-growth markets and sectors around the world.  The new scientific expertise will also help enhance and advance Carbios’ research into biological solutions for the life cycle of plastics and textiles.  In addition, a sensitivity to CSR issues and proven results in this field was also a key selection factor to join the Board.  The new members’ combined strategic vision, solid industry experience and CSR commitments will support Carbios in its industrial and commercial plans.
 
Prof. Karine AUCLAIR is Professor of Chemistry at McGill University and holds the Tier 1 Canada Research Chair in Antimicrobials and Green Enzymes.  She has received numerous awards over the years, including the Clara Benson Award of the Canadian Society of Chemistry, the McGill Tomlinson Professorship, the Leo Yaffe Teaching Award, and the McGill Fessenden Professorship, to name a few. She is an internationally recognized bioorganic chemist with significant scientific contributions to the fields of antimicrobial resistance, biocatalysis and enzymology. Her research led to several patents notably in the clean enzymatic depolymerization of untreated, high crystallinity PET plastics for closed-loop recycling.  Her work has been published in nearly 100 peer-reviewed publications in high-impact journals, and often highlighted by the media.  As a recognized leader in her field, she is often invited to speak at industrial and academic conferences around the world, and to review theses and grant applications for worldwide institutions.
 
Sandrine CONSEILLER is former Chief Executive Officer of Aigle (the emblematic French brand committed to sustainable fashion).  Prior to joining Aigle, Sandrine was Group Marketing & Branding Executive Vice-President at Lacoste (another historic French fashion brand) from 2011 to 2015.  She contributed to the Lacoste maison turnaround with strong growth and numerous professional awards including several Cannes Lions Awards.  She was also Member of the Executive Board.  Sandrine began her career at Unilever and spent 20 years leading global businesses within various divisions, mainly in Personal Care, in Latin America, Europe, and Asia.  Sandrine is also Member of the Board of Phildar (the iconic French knitwear brand), Member of the Board of Raise Sherpa (the first philantropic endowment fund dedicated to start-ups) and is a funding partner of NEO FOUNDERS (a venture fund mentoring impact start-ups).
 
Amandine DE SOUZA is General Manager of LE BHV MARAIS (French retail, decoration and fashion department stores), Eataly (an Italian gastronomy concept franchise) and Home, DIY and Leisure Purchasing at Galeries Lafayette Group since 2018.  She has been a Member of its Executive Committee since 2020.  Amandine has 17 years’ experience in different types of companies of various sizes: from family business, to start-up,  and multinational.  She was General Manager for France at Westwing (an e-commerce start-up) from 2015 to 2018.  From 2009 to 2015, she was International Merchandise Director at Casino Group (food and non-food retail distribution).  Prior to this, she worked as a strategic consultant at Bain & Company within their Distribution and Consumer Goods Division in France and internationally.
 
Mateus SCHREINER GARCEZ LOPES is Global Director for Energy Transition and Investments at Raizen (global leader in bioenergy from Brazil), leading technology, new business development and intellectual property at the company.  He was previously Global Manager for Innovation and Business Development in Renewable Chemicals at Braskem (the largest producer of thermoplastic resins in the Americas and the world’s largest producer of biopolymers).  Before his transition to the corporate world, Mateus held several researcher and lecturer positions on Synthetic Biology and metabolic Engineering at Universities in Mexico, Germany, United States and Brazil.  He is also a Board Member of Iogen Energy Corporation, Vice-Chairman of the Board of the Brazilian Association of Bio Innovation, and Advisory Committee Member from the MIT Energy Initiative.

More information:
Carbios
Source:

Carbios

13.02.2023

CELLIANT cleared to market in 50+ countries

  • Registered in majority as a class 1 medical device  

CELLIANT -  a performance textile that converts body heat into infrared energy - is designated as a Class 1 Medical Device in Australia, Canada, the EU and European Economic Area (EEA), Japan, New Zealand, the United Arab Emirates, the United Kingdom and the United States. CELLIANT is cleared to market in China, India, Indonesia, Korea, Malaysia, Mexico, Peru, Philippines, Russia, Saudi Arabia, Singapore, South Africa, Taiwan, Thailand and Vietnam, with more countries and regions to follow.

  • Registered in majority as a class 1 medical device  

CELLIANT -  a performance textile that converts body heat into infrared energy - is designated as a Class 1 Medical Device in Australia, Canada, the EU and European Economic Area (EEA), Japan, New Zealand, the United Arab Emirates, the United Kingdom and the United States. CELLIANT is cleared to market in China, India, Indonesia, Korea, Malaysia, Mexico, Peru, Philippines, Russia, Saudi Arabia, Singapore, South Africa, Taiwan, Thailand and Vietnam, with more countries and regions to follow.

In 2017, the FDA determined that products containing CELLIANT are medical devices as defined in section 201(h) of the Federal Food, Drug and Cosmetic Act and are general wellness products because they are intended to temporarily increase blood flow and local circulation at the site of the application in healthy individuals.
 
At Hologenix®, whose CELLIANT® infrared technology is an ingredient in world-class brands across many categories, science matters. The company has a distinguished Science Advisory Board composed of experts in the fields of photobiology, nanotechnology, sleep medicine, diabetes and wound care. The Science Advisory Board has overseen nine peer-reviewed published studies that collectively demonstrate CELLIANT’s effectiveness and the benefits of infrared energy. This claim set provides the basis for products containing CELLIANT to be designated as a Class 1 Medical Device in 38 countries and cleared to market in 15, with more countries and regions to follow. This elevated status in 53 countries translates to CELLIANT being an ideal partner for global companies who are seeking innovation in textiles to distinguish their products.   

“We have laid the groundwork for our partner brands to capitalize on the benefits of our infrared technology and to enhance their ability to do business,” said Seth Casden, Hologenix co-founder and CEO.  “We firmly believe that regulatory status matters and that is why we have grown the number of countries we have such relationships with by over a third in the last three years. It is definitely a competitive advantage of our company and CELLIANT.”

“Globally, the awareness of the benefits of infrared textiles, which absorb body heat and reflect it back as therapeutic infrared energy, has grown exponentially over the last 10 years,” continued Casden. “And in the United States infrared is gaining a strong foothold.”

Source:

Hologenix

(c) Löffler
The EC300-S collarette cutter
10.02.2023

TMAS: Svegea installs Collarette Cutter at Löffler

Svegea of Sweden – a member of TMAS, the Swedish Textile Machinery Association – has recently installed an EC300-S collarette cutter for the high speed production of tubular apparel components as well as an FA350 automatic roll slitter at the plant of Löffler, in Ried im Innkreis, Austria.

The EC 300-S collarette cutter is equipped with the computer-controlled True-Drive II and high pre-feed device, which is used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements. It operates at speeds of up to 20,000 metres per hour. The integrated, fully automatic FA350 roll slitter FA500 roll slitter is equipped with three separately adjustable settings enabling three different band widths to be cut within the same cutting cycle. Automatic tube sewing units are provided for sewn tubes in optional rolled or flat folded forms, depending on customer preference.

Svegea of Sweden – a member of TMAS, the Swedish Textile Machinery Association – has recently installed an EC300-S collarette cutter for the high speed production of tubular apparel components as well as an FA350 automatic roll slitter at the plant of Löffler, in Ried im Innkreis, Austria.

The EC 300-S collarette cutter is equipped with the computer-controlled True-Drive II and high pre-feed device, which is used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements. It operates at speeds of up to 20,000 metres per hour. The integrated, fully automatic FA350 roll slitter FA500 roll slitter is equipped with three separately adjustable settings enabling three different band widths to be cut within the same cutting cycle. Automatic tube sewing units are provided for sewn tubes in optional rolled or flat folded forms, depending on customer preference.

Sports and knitwear specialist Löffler is celebrating its 50th anniversary in 2023. Its plant in Ried houses 25 circular knitting machines and three seamless knitting machines with an annual output of around 905,000 square metres of fabric, and in addition to product development, design, cutting and some sewing are all carried out in-house.

Löffler is known for its transtex under garments, which ushered in the two-layer principle of structures combining hydrophobic polypropylene and other fibres like cotton, Modal, Tencel or merino wool.

Before transtex, endurance athletes usually wore pure cotton underwear next to their skin, which became wet over time and cooled the body down. Löffler’s two-layer fabric prevented this, since the polypropylene does not absorb moisture and instead wicks it to the outside, where it can evaporate to keep the skin dry.

Innovation has been ongoing ever since, and in December, Löffler received an ISPO Award 2022 for transtex Retr’x – its latest functional underwear made from recycled polypropylene from textile waste and a combination of recycled and GOTS-certified organic cotton. Transtex Retr’x is neither dyed or bleached and is Standard 100 by Oeko-Tex as well as Made In Green by Oeko-Tex approved.

In addition to its own branded products, the plant makes sports garments for sister company Fischer, which is also based in Ried, and is at the same time involved in significant government tender projects, including the supply of polo shirts for the Austrian Red Cross and for the German and Austrian police forces. Combined, Löffler and Fischer employ approximately 700 people in the region of Upper Austria.

Source:

TMAS by AWOL Media

09.02.2023

AVK Innovation Award 2023 – Submissions until 14 April

The The German Federation of Reinforced Plastics (AVK) is looking for the best innovations in the field of fibre-reinforced plastics (FRP) / composites covering the following categories:

  • Innovative products/components or applications
  • Innovative procedures/processes
  • Research and science

One goal of the AVK Innovation Award is to promote new products/components and applications made from fibre-reinforced plastics (FRP) and to promote new processes and methods for the manufacturing of FRP products. A further award is given to universities, colleges and institutes for outstanding work in science and research. In each of the categories special emphasis will be placed on the issue of sustainability.

Another goal is to give prominence to the innovations and also to the companies/institutions behind them, thus publicising their performance throughout the industry. The submissions will be evaluated by a jury of experts from the composites sector. The award ceremony will be held during the JEC Forum DACH event in Salzburg, Austria (24-25 October 2023).

The The German Federation of Reinforced Plastics (AVK) is looking for the best innovations in the field of fibre-reinforced plastics (FRP) / composites covering the following categories:

  • Innovative products/components or applications
  • Innovative procedures/processes
  • Research and science

One goal of the AVK Innovation Award is to promote new products/components and applications made from fibre-reinforced plastics (FRP) and to promote new processes and methods for the manufacturing of FRP products. A further award is given to universities, colleges and institutes for outstanding work in science and research. In each of the categories special emphasis will be placed on the issue of sustainability.

Another goal is to give prominence to the innovations and also to the companies/institutions behind them, thus publicising their performance throughout the industry. The submissions will be evaluated by a jury of experts from the composites sector. The award ceremony will be held during the JEC Forum DACH event in Salzburg, Austria (24-25 October 2023).

The submission deadline for the application documents is 14th April 2023.
Further details and assessment criteria can be found online.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

(c) adidas AG
08.02.2023

adidas and Stella McCartney present Spring / Summer 23 Collection

Stella McCartney hosted a party in L.A in celebration of her 18 year partnership with adidas and to present its new Spring/Summer 23 collection. Kicking off the biggest weekend in music, the collaboration took over LA’s famous Henson Recording Studios for an iconic evening that brought together music and fashion.

​A collaboration that has always pushed the limits, from innovation and sport style to working with pioneers across fashion, music and art, the party celebrated a partnership that continues to champion individual expression and inspires the new wave of trailblazers. ​Together, adidas and Stella McCartney are committed to finding new ways to create and support a better future through the fusion of recycled materials and key performance technologies.

The key collections showcased at the party include:​

Stella McCartney hosted a party in L.A in celebration of her 18 year partnership with adidas and to present its new Spring/Summer 23 collection. Kicking off the biggest weekend in music, the collaboration took over LA’s famous Henson Recording Studios for an iconic evening that brought together music and fashion.

​A collaboration that has always pushed the limits, from innovation and sport style to working with pioneers across fashion, music and art, the party celebrated a partnership that continues to champion individual expression and inspires the new wave of trailblazers. ​Together, adidas and Stella McCartney are committed to finding new ways to create and support a better future through the fusion of recycled materials and key performance technologies.

The key collections showcased at the party include:​

  • ICONS: Blending sport and style through contemporary cuts, the capsule sees iconic adidas by Stella McCartney designs reimagined in staple shades of black, grey and white – providing next-gen athletes with a timeless blank canvas to move with purpose. Featured for the first time is the Sportswear Run Shoe, an all-new gender-neutral silhouette made in part from natural and renewable materials.​
  • TRUENATURE: Designed for exploring the world outside, the collection captures a contemporary take on Earth and weather satellite images alongside conceptual contours and ley lines of maps. With leading technologies such as Parley Ocean Plastic and WIND.RDY, the collection has been crafted to protect the next generation of active activists.
Source:

adidas AG

03.02.2023

Cellulose Fibres Conference 2023 publishes program

International experts will discuss topics along the entire cellulose fibre value chain at the upcoming Cellulose Fibres Conference, 8–9 March 2023 in Cologne and online.

How can the cellulose fibre industry contribute to the sustainability and circularity of the textile sector? How can fibre markets achieve a circular economy for their materials? What are the most sustainable technologies on the market? And, are there innovative, interesting raw materials and technologies worth exploring to meet the challenges of the coming years?

These and other questions in the field of cellulose fibres will be discussed within the program of the Cellulose Fibres Conference 2023. The two-day event will provide insights into the latest developments of the cellulose fibre sector and introduce innovative start-ups, technologies as well as novel fibre applications. A special focus will be set on the textile sector and its awaited paradigm shift towards circular economy in the following years.

Seven sessions will provide in depth views from fibre production to recycling, policy and market trends:

International experts will discuss topics along the entire cellulose fibre value chain at the upcoming Cellulose Fibres Conference, 8–9 March 2023 in Cologne and online.

How can the cellulose fibre industry contribute to the sustainability and circularity of the textile sector? How can fibre markets achieve a circular economy for their materials? What are the most sustainable technologies on the market? And, are there innovative, interesting raw materials and technologies worth exploring to meet the challenges of the coming years?

These and other questions in the field of cellulose fibres will be discussed within the program of the Cellulose Fibres Conference 2023. The two-day event will provide insights into the latest developments of the cellulose fibre sector and introduce innovative start-ups, technologies as well as novel fibre applications. A special focus will be set on the textile sector and its awaited paradigm shift towards circular economy in the following years.

Seven sessions will provide in depth views from fibre production to recycling, policy and market trends:

  • Strategies, Policy Framework of Textiles and Market Trends,
  • Circular Economy and Recyclability of Fibres,
  • Alternative Feedstocks and Supply Chains,
  • Innovation Award “Cellulose Fibre Innovation of the Year 2023″,
  • Sustainability and Environmental Impacts,
  • Ionic Liquids and New Technologies for Pulps, Fibres and Yarns,
  • New Technologies and Applications beyond Textiles.

The full conference program is available here.

Source:

nova-Institut für politische und ökologische Innovation GmbH

01.02.2023

Carbios appoints new Executive Committee Members

Carbios has strengthened its leadership team with the appointment of Martine Brisset as Senior Vice President from 1 January 2023. Martine will manage the Biodegradation Division and supervise the Human Resources, Legal, Regulatory, Project Management, Quality Health and Safety departments. Martine Brisset joins the Group’s Executive Committee, as does Delphine Denoizé, who remains Innovation Programs Funding, Regulation and LCA Director with an expanding team.

Carbios has strengthened its leadership team with the appointment of Martine Brisset as Senior Vice President from 1 January 2023. Martine will manage the Biodegradation Division and supervise the Human Resources, Legal, Regulatory, Project Management, Quality Health and Safety departments. Martine Brisset joins the Group’s Executive Committee, as does Delphine Denoizé, who remains Innovation Programs Funding, Regulation and LCA Director with an expanding team.

Martine Brisset has over 30 years of General Management experience in international groups within the plastic and paper packaging industry, most notably at Amcor, Huhtamaki, Linpac and Klockner Pentaplast.  Since 2021, she has held the position of General Manager of Carbiolice in order to integrate this high-potential subsidiary dedicated to biodegradation within the Carbios Group. In her new position as Senior Vice President of Carbios, her main mission will be to successfully deploy the biodegradation technology, facilitate the international expansion of Carbios’ activities, organise the recruitment and training of the Group’s employees. With numerous recruitments planned throughout the company in 2023, building Carbios’ attractivity will be a strategic topic.

After several years working in innovation within the agricultural industry, Delphine Denoizé joined the Carbios in 2016 and was one of its first twenty employees. Initially in charge of Innovation Funding and Regulation, then Project Management for PET biorecycling, she now oversees all the Group’s projects. Her responsibilities include French and European public funding for innovation, regulatory compliance of processes and products around the world, and assessment of their environmental impact through specific tools such as Life Cycle Assessment.

More information:
Carbios Recycling plastics
Source:

Carbios

(c) Beste Spa
01.02.2023

Beste x HeiQ AeoniQ™ launch first collection

Beste x HeiQ AeoniQ™ announce their partnership with the launch of a capsule in the CARPINI collection at Milano Unica. The fabrics including HeiQ AeoniQ™ are crafted by the Italian textiles manufacturer Beste, well known for supplying high-end fabrics for premium and luxury brands.

The fabrics capsule collection for S/S 24 includes 12 articles made with 100% HeiQ AeoniQ™, linen, and HeiQ AeoniQ™ blends, and cotton and HeiQ AeoniQ™ blends in several different proportions.
The collection is named FLOW, as related to the movement of water and air to be in tune with Nature’s balance and rhythm, with a color range including hay, black, water, caramel, violet, dust, denim, lime, and cobalt.

With this initiative, Beste becomes the first partner to incorporate the HeiQ AeoniQ™ fiber into its active fabric portfolio, and also its Tessuteka, the library that keeps all the fabrics produced by the company since 1993.

Beste x HeiQ AeoniQ™ announce their partnership with the launch of a capsule in the CARPINI collection at Milano Unica. The fabrics including HeiQ AeoniQ™ are crafted by the Italian textiles manufacturer Beste, well known for supplying high-end fabrics for premium and luxury brands.

The fabrics capsule collection for S/S 24 includes 12 articles made with 100% HeiQ AeoniQ™, linen, and HeiQ AeoniQ™ blends, and cotton and HeiQ AeoniQ™ blends in several different proportions.
The collection is named FLOW, as related to the movement of water and air to be in tune with Nature’s balance and rhythm, with a color range including hay, black, water, caramel, violet, dust, denim, lime, and cobalt.

With this initiative, Beste becomes the first partner to incorporate the HeiQ AeoniQ™ fiber into its active fabric portfolio, and also its Tessuteka, the library that keeps all the fabrics produced by the company since 1993.

For Carlo Centonze, HeiQ’s CEO “the partnership with Beste makes total sense for all the values embodied by HeiQ AeoniQ™ that we both share, namely its commitment to circular ethics, practice and promote sustainability, and have a positive impact in the environment while also creating new business opportunities that the market and the Planet so urgently need.”

According to Giovanni Santi, Beste’s CDA president: “Beste SpA benefit company is strongly committed to developing a positive and responsible impact over the environment and the social fabric it is surrounded by. To meet this precise criterion, we use HeiQ AeoniQ™, a new biodegradable fiber developed by HeiQ, a Swiss chemical company that is Beste's constant partner in this indispensable green revolution. The introduction of HeiQ AeoniQ™, namely a fiber that is cellulosic in nature but with characteristics and performances similar to polyester ones, concerns a significant step in the reduction of CO2 emissions and plastics. It is not only a responsible choice, but it also deals with a precise and courageous positioning in the constant battle in favor of our planet by starting from the textile innovation front.”

The new Beste x HeiQ AeoniQ™ fabrics will be displayed at Beste’s booth during the Milano Unica trade show from January 31st to February 2nd, in Milan, Italy.

More information:
HeiQ AeoniQ Beste Milano Unica
Source:

HeiQ

(c) nova-Institut GmbH
24.01.2023

Six nominees for„Cellulose Fibre Innovation of the Year 2023“

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

Here are the six nominees
Vybrana – The new generation banana fibre – GenCrest Bioproducts (India)

Vybrana is a Gencrest’s Sustainable Cellulosic Fibre upcycled from agrowaste. Raw fibres are extracted from the Banana Pseudo stem at the end of the plant lifecycle. The biomass waste is then treated by the Gencrest patented Fiberzyme technology. Here, cocktail enzyme formulations remove the high lignin content and other impurities and help fibre fibrillation. The company's proprietary cottonisation process provides fine, spinnable cellulose staple fibres suitable for blending with other staple fibres and can be spun on any conventional spinning systems giving yarns sustainable apparel. Vybrana is produced without the use of heavy chemicals and minimized water consumption and in a waste-free process where balance biomass is converted to bio stimulants Agrosatva and Bio Fertilizers & organic manure.

HeiQ AeoniQ™ – technology for more sustainability of textiles – HeiQ (Austria)
HeiQ AeoniQ™ is the disruptive technology and key initiative from HeiQ with the potential to change the sustainability of textiles. It is the first climate-positive continuous cellulose filament yarn, made in a proprietary manufacturing process and the first to reproduce the properties of polyester and nylon yarns in a cellulosic, biodegradable, and endlessly recyclable fibre.
HeiQ AeoniQ™ can be manufactured from different cellulosic raw materials such as pre- and post-consumer textile waste, biotech cellulose, and non-valorized agricultural waste, such as ground coffee waste or banana peels. It naturally degrades after only 12 weeks in the soil. Each ton of HeiQ AeoniQ™ saves 5 tons of CO2 emissions. The first garments made with this innovative cellulosic filament fiber were commercially launched in January 2023.

TENCEL™ LUXE – lyocell filament yarn – Lenzing (Austria)
TENCEL™ LUXE is LENZING’s new versatile lyocell yarn that offers an urgently needed sustainable filament solution for the textile and fashion industry. A possible botanical alternative for silk, long-staple cotton, and petrol-based synthetic filaments, is derived from wood grown in renewable, sustainably managed forests, and produced in an environmentally sound, closed-loop process that recycles water and reuses more than 99 % of organic solvent. Certified by The Vegan Society, it is suitable for a wide range of applications and fabric developments, from finer high fashion propositions to denim constructions, seamless and activewear innovations, and even agricultural and technical solutions.

Nullarbor™ – Nanollose & Birla Cellulose (Australia/India)
In 2020, Nanollose & Birla Cellulose started a journey to develop and commercialize tree-free lyocell from bacterial cellulose, called Nullarbor™. The name derives from the Latin “nulla arbor” which means “no trees”. Initial lab research at both ends led to a joint patent application with the patent “production of high-tenacity lyocell fibres made from bacterial cellulose”.
Nullarbor is significantly stronger than lyocell made from wood-based pulp; even adding small amounts of bacterial cellulose to wood pulp increases the fibre toughness. In 2022, the first pilot batch of 260kg was produced with 20 % bacterial pulp share. Several high-quality fabrics and garments were produced with this fibre. The collaboration between Nanollose & Birla Cellulose now focuses on increasing the production scale and amount of bacterial pulp in the fibre.

Circulose® – makes fashion circular – Renewcell (Sweden)
Circulose® made by Renewcell is a branded dissolving pulp made from 100 % textile waste, like worn-out clothes and production scraps. It provides a unique material for fashion that is 100 % recycled, recyclable, biodegradable, and of virgin-equivalent quality. It is used by fibre producers to make staple fibre or filaments like viscose, lyocell, modal, acetate or other types of man-made cellulosic fibres. In 2022, Renewcell, opened the world’s first textile-to-textile chemical recycling plant in Sundsvall, Sweden – Renewcell 1. The plant will eventually reach 120,000 tons of annual capacity.

Sparkle sustainable sanitary pads – Sparkle Innovations (United States)
Globally, around 300 billion period products are discarded every year, resulting in millions of tons of non-biodegradable waste. Since most conventional sanitary pads contain up to 90 % plastics, they do not biodegrade for around 600 years. Sparkle has designed sustainable, plastic-free, biodegradable and compostable Sparkle sanitary pads. From product to packaging, they are made up of around 90 % cellulose-based materials with top sheet, absorbent core, release paper, wrapping paper and packaging made of cellulose-based fibres. Whether Sparkle pads end up in a compost pit, are incinerated or end up in a landfill, they are a more sustainable alternative compared to conventional pads that contain large amounts of plastics, complex petro-chemical based ingredients and artificial fragrances. When tested according to ISO 14855-1 by a leading independent lab in Europe, Sparkle pads reached over 90 % absolute biodegradation within 90 days in commercial composting conditions.

19.01.2023

Alliance of the Willing at Berlin Fashion Week: VORN, Zalando, Unity and Kornit Digital

Kornit Digital LTD. (NASDAQ: KRNT) ("Kornit" or the "Company"), a market leader in sustainable, on-demand digital fashion and textile production technologies, announced its partnership with VORN – The Berlin Fashion Hub, Zalando, and Unity – creating an "alliance of the willing" to transform the industry via "phygital" fashion with a circular approach.

Kornit Digital LTD. (NASDAQ: KRNT) ("Kornit" or the "Company"), a market leader in sustainable, on-demand digital fashion and textile production technologies, announced its partnership with VORN – The Berlin Fashion Hub, Zalando, and Unity – creating an "alliance of the willing" to transform the industry via "phygital" fashion with a circular approach.

Nine designers were challenged to create fashion capsules in eight weeks utilizing the latest technology innovations from the three alliance partners – combining digital product creation, web3-based design, digital printing, immersive circular design, 3D rendering and avatar development. All collections are on display exclusively at Berlin Fashion Week from Wednesday, January 18 to Friday, January 20 at Bikini Berlin.
 
The challenge follows standing room only Kornit Fashion Week events across the globe, displaying how on-demand, digital production creates a fashion world of nearly endless creativity. Hosted at the Impact Hub Berlin, the VORN Academy Program offered creators access to a holistic technology toolset - including the advanced Kornit Presto MAX single-step solution for direct-to-fabric sustainable printing. Some of the prominent designers taking part include costume and fashion designer Alexis Mersmann, Judith Bondy, AR and NFT artist Ann-Britt Dittmar, Berlin-based director Tanja Bombach, Nina Jurcic, Olga Boncheva, digital artist, and fashion designer Schirin Negahbani, Johann Erhardt, and Israeli designer Idan Yoav.
 
"This collaboration across four industry leaders is so unique because the result is a sum so much greater than each of its individual parts. It's a true 'alliance of the willing' that opens doors to 'phygital' collections built at the intersection of digital fashion, 3D design, and on-demand production," said Omer Kulka, Chief Innovation Officer at Kornit Digital. "We're honored to team with VORN – The Berlin Fashion Hub, Zalando, and Unity during Berlin Fashion Week to demonstrate what's possible as the physical and virtual fashion worlds come together."
 
"When we launched the Berlin Fashion Hub, our intent was to create a B2B environment to spark unmatched fashion and sustainability innovations. As Berlin is one of the world's most important fashion and textile centers, there is no better place to demonstrate economically succesful circularity in the fashion industry," said Professor Marte Hentschel, Co-Founder at VORN – The Berlin Fashion Hub. "Together, we're changing fashion to drive sustainability and harness the creative power of both the physical and virtual. We're proud of what's been accomplished in conjunction with an incredible group of designers, creators, and partners."

Source:

Kornit

Photo Pure Denim
03.01.2023

PureDenim & Bemberg ™: “Blue di Cupro” collection at Pitti Uomo

In occasion of the next edition of Pitti Uomo, Bemberg™ by Asahi Kasei – the unique fiber with a circular economy footprint obtained from cotton linters through a closed-loop process ensuring certified sustainability credentials through its transparent and traceable approach- reveals a very special Bemberg™ fabrics smart range dedicated to premium denimwear.

In occasion of the next edition of Pitti Uomo, Bemberg™ by Asahi Kasei – the unique fiber with a circular economy footprint obtained from cotton linters through a closed-loop process ensuring certified sustainability credentials through its transparent and traceable approach- reveals a very special Bemberg™ fabrics smart range dedicated to premium denimwear.

This has been made possible thanks to the partnership with PureDenim, a leading Italian company whose strategy since 10 years is based on an entire re-design of the production system, inspired by circular economy principles that combines technology and innovative materials in order to offer the highest levels of design, innovation and real responsible values derived from an holistic approach to sustainability.
The “Blue di Cupro” collection is made with seven fabrics made with Bemberg™, either 100% Bemberg™ or in blend with cotton, wool, and it applies the most advanced Pure Denim Technologies. The Blue di cupro fabrics made with Bemberg™ will also be dyed with “Smart Indigo” an indigo dye technology internally produced by PureDenim, through a chemical-free production. The only elements involved are: water, indigo pigments, and electricity. In terms of finishing, fabrics’ looks and performances are enhanced by the “Eco Sonic” ultrasounds finishing technology which brings significant reduction of water used, increased aesthetic features and controlled discoloration. And last but not least every yarn used at PureDenim is protected by NaturalReco® a 100% natural product that completely SUBSTITUTE the use of plastic films that are one of the key causes of microplastic emission for denim application.

“Blue” seems to be the new colour of Bemberg™, in fact, the company in early November 2022 announced, at the Blue Friday initiative by UNESCO's Intergovernmental Oceanographic Commission (IOC), the achievement of the OK biodegradable MARINE certification, which guarantees the biodegradability of its products even in the marine environment, as certified by TÜV AUSTRIA, meaning a lot in the context of microplastics in water issue solutions. This Bemberg™ certification’s achievement comes on top of other key ones such as the INNOVHUB report that confirms Bemberg™ biodegradability in soil without releasing hazardous substances, the RCS by Textile Exchange, and the Oeko-Tex Standard 100 and ISO 14001 corporate certifications.

Source:

C.L.A.S.S.

(c) C.L.A.S.S.
The Modern Artisans for 2022
28.12.2022

C.L.A.S.S.: YOOX NET-A-PORTER and The Prince’s Foundation programme for students

The second edition of The Modern Artisan initiative has been supported by C.L.A.S.S. with its strategic sourcing, mentoring and presence during the official launch happened at the beginning of November at the Dumfries House, part of The Prince's Foundation. Two days to introduce a capsule that reflects the initiative’s commitment to advance sustainability in luxury fashion, preserve heritage textile skills and creates a new culture where respect, beauty and innovation are blended together. They also demonstrate the shared ambition of YOOX NET-A-PORTER and The Prince’s Foundation to preserve the planet for future generations. The Modern Artisan aims to position artisanship as a viable and attractive career path for upcoming generations, equipping them with the skills to help shape a more circular industry.

The 10-month paid programme supports eight British and Italian graduates through the end-to-end process of designing, handcrafting, and bringing a more sustainable luxury collection to a global market. During the programme, they were given the opportunity to showcase their work to His Majesty, then The Prince of Wales, at Dumfries House.

The second edition of The Modern Artisan initiative has been supported by C.L.A.S.S. with its strategic sourcing, mentoring and presence during the official launch happened at the beginning of November at the Dumfries House, part of The Prince's Foundation. Two days to introduce a capsule that reflects the initiative’s commitment to advance sustainability in luxury fashion, preserve heritage textile skills and creates a new culture where respect, beauty and innovation are blended together. They also demonstrate the shared ambition of YOOX NET-A-PORTER and The Prince’s Foundation to preserve the planet for future generations. The Modern Artisan aims to position artisanship as a viable and attractive career path for upcoming generations, equipping them with the skills to help shape a more circular industry.

The 10-month paid programme supports eight British and Italian graduates through the end-to-end process of designing, handcrafting, and bringing a more sustainable luxury collection to a global market. During the programme, they were given the opportunity to showcase their work to His Majesty, then The Prince of Wales, at Dumfries House.

The 13-piece capsule marks the culmination of the second edition of The Modern Artisan, YOOX NET-A-PORTER’s and The Prince’s Foundation’s pioneering flagship training programme, which commenced in 2019. Building on the success of 2020’s first collection launch, this year’s YOOX NET-A-PORTER for The Prince’s Foundation capsule achieves a number of new milestones in YOOX NET-A-PORTER’s Infinity sustainability journey. It is the first collection to align 100% with the Infinity Product Guide, its sustainability and circularity design guidelines, and its first ever carbon neutral collection.

The design is inspired by Highgrove Gardens, run by The Prince's Foundation and renowned for sustainable and organic approaches to agriculture and horticulture. The Artisans were supported by industry experts from YOOX NET-A-PORTER, The Prince’s Foundation, and several mentoring designer brands, including Gabriela Hearst, Nanushka and Stella Jean among others.

(c) adidas AG
21.12.2022

adidas Cultivate & B.L.O.O.M. Program elevates Black and Latinx Entrepreneurs

  • In Spring 2022, adidas announced its partnership with Impact Hub and Blavity.org to launch a new program called Cultivate & B.L.O.O.M. (Building Legacies Out of Movements), an accelerator program for social entrepreneurs of color.
  • Through knowledge sharing and funding, the program cultivates a thriving ecosystem for changemakers to accelerate impact and deliver initiatives at the intersection of sport, equity and creativity for Black and Latinx communities.

In Spring 2022, adidas announced its newest program, Cultivate & B.L.O.O.M., designed to equip entrepreneurs of color with tools and resources to enable them to accelerate growth and maximize impact. As part of adidas’ United Against Racism commitments and celebration of boundary-breaking Black women, Cultivate & B.L.O.O.M. is further closing the opportunity gap that exists for Black and Latinx social entrepreneurs by elevating, co-creating with and funding entrepreneurs creating change in their communities.

  • In Spring 2022, adidas announced its partnership with Impact Hub and Blavity.org to launch a new program called Cultivate & B.L.O.O.M. (Building Legacies Out of Movements), an accelerator program for social entrepreneurs of color.
  • Through knowledge sharing and funding, the program cultivates a thriving ecosystem for changemakers to accelerate impact and deliver initiatives at the intersection of sport, equity and creativity for Black and Latinx communities.

In Spring 2022, adidas announced its newest program, Cultivate & B.L.O.O.M., designed to equip entrepreneurs of color with tools and resources to enable them to accelerate growth and maximize impact. As part of adidas’ United Against Racism commitments and celebration of boundary-breaking Black women, Cultivate & B.L.O.O.M. is further closing the opportunity gap that exists for Black and Latinx social entrepreneurs by elevating, co-creating with and funding entrepreneurs creating change in their communities.

Through an intentional selection process, eight Black women social entrepreneurs were identified to participate in the first-ever Cultivate & B.L.O.O.M. cohort. The first cohort kicked off in July 2022 and will graduate in March 2023.

Throughout their nine months in the program, entrepreneurs have access to a tailored portfolio of resources and opportunities from within and outside of the adidas ecosystems that will serve to accelerate their impact. These resources include funding, access to industry experts, mentorship, workshops, fireside chats and visibility into adidas’ networks.

After graduating from the program, participants become a partner in the “Innovation Network”, a network of social impact partners that seek to drive forward change within their communities and organizations. This portfolio of partners will enable adidas to continue strengthening the diversity of our partnership network, increase our reach within key markets and deepen our relationships over time.

Source:

adidas AG

© ITM/TU Dresden
Woven hemisphere for usage in radome antennaes
15.12.2022

AVK Innovation Award 2022 to young engineers from ITM at TU Dresden

  • Award for near-net-shape 3D meshes for use in fibre-reinforced plastics

As part of the JEC FORUM DACH 2022, the AVK Innovation Awards were presented in Augsburg on November 29th. The innovation price in the category "Research/Science" (first place) was awarded to the team of scientists Dipl.-Ing. Dominik Nuss, Dr.-Ing. Cornelia Sennewald and Prof. Dr.-Ing. habil. Chokri Cherif.

With the development of the pull-off-free Jacquard weaving technology including the technological know-how in the field of highly complex 2D and 3D fabric geometries, which has been established at the ITM of the TU Dresden for many years, Dominik Nuss has succeeded in including different yarn lengths locally into the fabric structure solely through targeted variation of the fabric weave. There-fore, it is now possible to produce completely new types of fabrics without additional draping, especially spherically curved fabrics, but also large-format spiral or even curved fabrics. The fact that the required near-net-shape geometry of the component to be reinforced can be reproduced with significantly reduced preforming steps is to be emphasized.

  • Award for near-net-shape 3D meshes for use in fibre-reinforced plastics

As part of the JEC FORUM DACH 2022, the AVK Innovation Awards were presented in Augsburg on November 29th. The innovation price in the category "Research/Science" (first place) was awarded to the team of scientists Dipl.-Ing. Dominik Nuss, Dr.-Ing. Cornelia Sennewald and Prof. Dr.-Ing. habil. Chokri Cherif.

With the development of the pull-off-free Jacquard weaving technology including the technological know-how in the field of highly complex 2D and 3D fabric geometries, which has been established at the ITM of the TU Dresden for many years, Dominik Nuss has succeeded in including different yarn lengths locally into the fabric structure solely through targeted variation of the fabric weave. There-fore, it is now possible to produce completely new types of fabrics without additional draping, especially spherically curved fabrics, but also large-format spiral or even curved fabrics. The fact that the required near-net-shape geometry of the component to be reinforced can be reproduced with significantly reduced preforming steps is to be emphasized.

Continuous simulation aided engineering from CAD design to integrally woven 2D and 3D preforms by means of highly complex weave development for spatial constructions is a unique at the ITM, which was indispensable for the development of these promising woven high-tech structures. This technology is completely new and has never been carried out in this way before. The fabric structures are characterised by a high innovation level due to their geometric diversity and purposes. It can be used in numerous applications and further more contributes to the development of completely new fields of application. The technology can be implemented on all Jacquard weaving machines with only an additional device and the preform geometry is only determined by the control of the Jacquard machine. The preform geometry can be used in the full working width of the weaving machine.

Professor Chokri Cherif, Institute Director of the ITM, and his team are very pleased about these continuous research success in the constantly growing research field of 3D weaving technology, which are achieved at the ITM in close cooperation with industry and users. "This award is a special honour for our institute and confirms that the many years of our excellent research in the field of near-net-shape 3D weaving for the fibre-reinforced plastics sector plays a significant role and that we are making a significant contribution to the sustainable and resource-efficient production of lightweight structures with our development".

Source:

ITM/TU Dresden

(c) Hohenstein
13.12.2022

Hohenstein: New testing lab in Shanghai

With the opening of another laboratory in Shanghai, China, testing service provider Hohenstein is growing its international network. Starting in the first quarter of 2023, the new textile laboratory in the Pudong District industrial park will supplement the Hong Kong laboratory capacity with testing and on-site inspection services in the hot spots of textile production.

The new laboratory will offer suppliers, manufacturers, brands, and retailers a wide range of testing service on textile quality. "Hohenstein stands for innovation and quality. We are very pleased to celebrate another milestone in our international expansion, while following these principles," said Prof. Dr. Stefan Mecheels, who is the third generation to lead the family-run company. "No matter where the examinations, tests and analyses are carried out, all our laboratories work with state-of-the-art equipment and the same high standards."

The laboratory locations in Germany, Hungary, Hong Kong, Bangladesh, India and now Shanghai, offer shortened turnaround and sample transport times. In some locations, Hohenstein offers sample pick up services from the customer to the lab for testing.

With the opening of another laboratory in Shanghai, China, testing service provider Hohenstein is growing its international network. Starting in the first quarter of 2023, the new textile laboratory in the Pudong District industrial park will supplement the Hong Kong laboratory capacity with testing and on-site inspection services in the hot spots of textile production.

The new laboratory will offer suppliers, manufacturers, brands, and retailers a wide range of testing service on textile quality. "Hohenstein stands for innovation and quality. We are very pleased to celebrate another milestone in our international expansion, while following these principles," said Prof. Dr. Stefan Mecheels, who is the third generation to lead the family-run company. "No matter where the examinations, tests and analyses are carried out, all our laboratories work with state-of-the-art equipment and the same high standards."

The laboratory locations in Germany, Hungary, Hong Kong, Bangladesh, India and now Shanghai, offer shortened turnaround and sample transport times. In some locations, Hohenstein offers sample pick up services from the customer to the lab for testing.

Source:

Hohenstein

Ein Outfit aus der Strick-Kollektion "MOTIRÕ" von Gabriela Paranhos Lopes, inspiriert von Körperbemalungen und Kunsthandwerk brasilianischer Urvölker. Foto: Neo Fashion Berlin / Jens Zander
12.12.2022

Studierende der HSNR mit Fashion Show auf internationaler Textilkonferenz in Aachen

Studierende des Fachbereichs Textil- und Bekleidungstechnik der Hochschule Niederrhein präsentierten Anfang Dezember bei der Aachen-Dresden-Denkendorf International Textile Conference 2022 (ADD) Designs auf einer Modenschau. Bei der hybriden Show zeigten Studierende von drei Hochschulen ihre Kollektionen.

Die Studierenden interpretierten mit ihren Outfits vier aktuelle Themen: Creativity, Sustainability, Innovation und Diversity. Gabriela Paranhos Lopes ließ sich für ihre Strick-Kollektion "MOTIRÕ" von Grafiken, Körperbemalungen und Kunsthandwerk brasilianischer Urvölker inspirieren und übersetzte diese in eine zeitgemäße und nachhaltige DOB Strickkollektion. Verarbeitet wurden nur die Pflanzenfasern Bio-Baumwolle und Leinen.

Die Studierenden Franziska Jauch & Gia Phuc Trinh zeigten ihre Kollektion "D4L", die im Rahmen eines Forschungsprojekts entstand. Sie arbeiteten mit flächigen Lasereffekten und Diamond-Finishings, um Denimgewebe emissionsarm zu gestalten. Die Schnittgestaltung und Print-Designs führen wie ein Zeitstrahl durch die Denim- Geschichte bis hin zu einem Zukunftsszenario.

Studierende des Fachbereichs Textil- und Bekleidungstechnik der Hochschule Niederrhein präsentierten Anfang Dezember bei der Aachen-Dresden-Denkendorf International Textile Conference 2022 (ADD) Designs auf einer Modenschau. Bei der hybriden Show zeigten Studierende von drei Hochschulen ihre Kollektionen.

Die Studierenden interpretierten mit ihren Outfits vier aktuelle Themen: Creativity, Sustainability, Innovation und Diversity. Gabriela Paranhos Lopes ließ sich für ihre Strick-Kollektion "MOTIRÕ" von Grafiken, Körperbemalungen und Kunsthandwerk brasilianischer Urvölker inspirieren und übersetzte diese in eine zeitgemäße und nachhaltige DOB Strickkollektion. Verarbeitet wurden nur die Pflanzenfasern Bio-Baumwolle und Leinen.

Die Studierenden Franziska Jauch & Gia Phuc Trinh zeigten ihre Kollektion "D4L", die im Rahmen eines Forschungsprojekts entstand. Sie arbeiteten mit flächigen Lasereffekten und Diamond-Finishings, um Denimgewebe emissionsarm zu gestalten. Die Schnittgestaltung und Print-Designs führen wie ein Zeitstrahl durch die Denim- Geschichte bis hin zu einem Zukunftsszenario.

Die Fashion Show wurde in Kooperation mit dem Team der Neo.Fashion.Berlin ausgerichtet, die jährlich die besten Absolventinnen und Absolventen der Fachrichtung Design deutscher Hochschulen in einer „Best Graduates‘ Show“ während der Fashion Week in Berlin der Fachwelt bekannt macht.

„Die Internationale Textiltagung hat als eine der größten Textilkonferenzen eine europaweite Strahlkraft, hier kommen Wissenschaftler und Anwender regelmäßig zusammen. Das Tagungsmotto dieses Jahres „Textile Impulse für die Zukunft“ wird durch die Designtalente richtig gut sichtbar, ein echter Frischekick, um den Blick in die Zukunft zu lenken“, sagt Dr. Maike Rabe, Professorin für Textilveredlung und Ökologie an der Hochschule Niederrhein.

Source:

Hochschule Niederrhein

(c) AVK
02.12.2022

AVK awards Innovation Prices

AVK, the Federation of Reinforced Plastics, has once again awarded its Innovation Awards to a range of companies, institutes and their partners in 2022. Three innovative composites from each of the three categories Products & Applications, Processes & Methods and Research & Science were honoured during the JEC Forum for Germany, Austria and Switzerland in Augsburg at an award ceremony on 29 November 2022. A professional jury, composed of engineers, scientists and trade journalists, presented the awards for 2022 in three categories.

List of award winners in the three categories:
Products & Applications category

First place: LAMILUX Composites GmbH, Rehau, Germany: Lamilux Sunsation® – the new standard under the sun
Second place: Carbo-Link AG, Fehraltorf, Switzerland: CL RESTRAP – Reinforcement of concrete girders using flexible, prestressed CRP tapes
Third place: Borgers SE & Co. KGaA, Bocholt, Germany: blue label by Borgers ®

AVK, the Federation of Reinforced Plastics, has once again awarded its Innovation Awards to a range of companies, institutes and their partners in 2022. Three innovative composites from each of the three categories Products & Applications, Processes & Methods and Research & Science were honoured during the JEC Forum for Germany, Austria and Switzerland in Augsburg at an award ceremony on 29 November 2022. A professional jury, composed of engineers, scientists and trade journalists, presented the awards for 2022 in three categories.

List of award winners in the three categories:
Products & Applications category

First place: LAMILUX Composites GmbH, Rehau, Germany: Lamilux Sunsation® – the new standard under the sun
Second place: Carbo-Link AG, Fehraltorf, Switzerland: CL RESTRAP – Reinforcement of concrete girders using flexible, prestressed CRP tapes
Third place: Borgers SE & Co. KGaA, Bocholt, Germany: blue label by Borgers ®

Innovative Processes & Methods category
First place: BaltiCo GmbH, Hohen Luckow, Germany: Rod laying technology as an additive manufacturing process
Second place: Schmidt & Heinzmann GmbH & Co. KG, Bruchsal, Germany: Pole Position, a positioning system for polarisation imaging
Third place: NETZSCH Process Intelligence GmbH, Selb, Germany: SensXPERT, process optimisation driven by material data to increase the efficiency of thermosets and fibre composites

Research & Science category
First place: Institute for Textile Machinery and High Performance Textiles at the Technical University of Dresden: Spherically curved fibre-reinforced plastic composite components made from near-net-shape fabrics
Second place: Leibniz-Institut für Verbundwerkstoffe GmbH, Kaiserslautern, Germany: HyKoPerm – a measurement system for an industry-specific characterisation of textile impregnation behaviour
Third place: Technical University of Munich, Chair of Carbon Composites: Manufacturing processes for a tension-strut-supported pressure vessel that can be adapted to suit a given space

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V.

02.12.2022

Lenzing tops Canopy’s “Hot Button Ranking” 2022

  • Lenzing again recognized for sustainable sourcing, innovation and transparency
  • Lenzing achieves the highest category for the third time already

The Lenzing Group achieved first place in the “Hot Button Ranking” of the Canadian non-profit organization Canopy, thus confirming its leading role in the areas of sustainability and responsible wood and pulp sourcing. Lenzing can also once again celebrate a dark green shirt, synonymous with the highest category.

In this ranking, which receives a lot of attention in the textile and apparel industry, Canopy evaluates the world’s 34 largest producers of cellulosic fibers in terms of their sustainable wood and pulp sourcing, their efforts with regard to the use of alternative raw materials and their achievements in the protection of ancient and endangered forests. Resource preservation is a key element of Lenzing’s corporate strategy and at the core of its innovation agenda. The sustainable production of TENCEL™, VEOCEL™ and LENZING™ ECOVERO™branded specialty fibers is based on these principles.

  • Lenzing again recognized for sustainable sourcing, innovation and transparency
  • Lenzing achieves the highest category for the third time already

The Lenzing Group achieved first place in the “Hot Button Ranking” of the Canadian non-profit organization Canopy, thus confirming its leading role in the areas of sustainability and responsible wood and pulp sourcing. Lenzing can also once again celebrate a dark green shirt, synonymous with the highest category.

In this ranking, which receives a lot of attention in the textile and apparel industry, Canopy evaluates the world’s 34 largest producers of cellulosic fibers in terms of their sustainable wood and pulp sourcing, their efforts with regard to the use of alternative raw materials and their achievements in the protection of ancient and endangered forests. Resource preservation is a key element of Lenzing’s corporate strategy and at the core of its innovation agenda. The sustainable production of TENCEL™, VEOCEL™ and LENZING™ ECOVERO™branded specialty fibers is based on these principles.

Promoting the circular economy
With its REFIBRA™ and Eco Cycle technologies, Lenzing offers solutions for transforming the textile and nonwovens industries towards a circular economy. In line with its vision for the circular economy, “We give waste a new life. Every day.” Lenzing is driving the industry toward a full circular economy by striving to give waste a new life in all aspects of its core business and developing circular solutions together with potential partners inside and outside the current value chain. A milestone on this path is the cooperation with the Swedish pulp producer Södra. The two global market leaders, who have been proactively promoting the circular economy in the fashion industry for many years, are joining forces to give the topic a further boost and make a decisive contribution to solving the global textile waste problem by making fibers from post-consumer textiles.

Today, Lenzing offers lyocell fibers made from 30 percent recycled cotton waste. The company aims to launch lyocell, modal and viscose staple fibers with up to 50 percent recycled post-consumer content on a commercial scale by 2025 and to develop a new circular business model by closing the loops for post-consumer waste. By 2025, the company plans to enter into further partnerships with 25 key supply chain companies.

Source:

Lenzing AG

(c) SANITIZED AG
Dr. Martin Čadek, CTO SANITIZED AG
02.12.2022

SANITIZED AG stärkt Innovationskompetenz mit neuem CTO

Swiss-based SANITIZED AG is increasing its innovation expertise by appointing a new CTO, Dr. Martin Čadek, who will oversee global technological activities for the specialist antimicrobial hygiene brand. Dr. Čadek will lead the company’s Competence Centre for Technology Innovation and will focus on breaking new ground to develop innovations in sustainability.

Dr. Čadek is a graduate physicist with a master’s degree in polymer science with many years’ experience in the industry working with polymers, fibres, industrial textiles, and extruded polymers. He is joining SANITIZED AG from his most recent role as Managing Director for German subsidiary the Flint Group. His previous roles include the Global Head of Innovation for Energy and Polymer Systems at Evonik/Orion, the Head of Extrusion Technology Business Unit in Europe for Emerell AG, and work with the SGL Group.

Swiss-based SANITIZED AG is increasing its innovation expertise by appointing a new CTO, Dr. Martin Čadek, who will oversee global technological activities for the specialist antimicrobial hygiene brand. Dr. Čadek will lead the company’s Competence Centre for Technology Innovation and will focus on breaking new ground to develop innovations in sustainability.

Dr. Čadek is a graduate physicist with a master’s degree in polymer science with many years’ experience in the industry working with polymers, fibres, industrial textiles, and extruded polymers. He is joining SANITIZED AG from his most recent role as Managing Director for German subsidiary the Flint Group. His previous roles include the Global Head of Innovation for Energy and Polymer Systems at Evonik/Orion, the Head of Extrusion Technology Business Unit in Europe for Emerell AG, and work with the SGL Group.

The Competence Centre for Technology & Innovation will provide services to all three of SANITIZED’s business units: Textiles, Polymer Additives, and Coatings and Preservation. It will be built on top of SANITIZED’s TecCenter for Analytics, Microbiology and Applications and its regulatory department.

More information:
Sanitized AG CTO Hygiene
Source:

SANITIZED AG