From the Sector

• CHIC Shanghai, March 14-16, 2018
• CHIC March 2018 closes successfully with rise in attendance
• CHIC´s new design: Discovering the young consumer world
• Successful business in all fair segments
• Service point CHIC as international platform for the international fashion trade
• New autumn date for CHIC: September 27-29, 2018

The spring edition of CHIC, taking place from March 14-16, 2018, finished successfully with yet another increase in visitor figures. 1,210 exhibitors from 21 countries and regions presented themselves on 117,200 m² at the National Exhibition & Convention Center in Shanghai. 112,666 visitors of all business channels were registered at the fair, among them leading department stores, shopping malls, multibrand stores, agents, distributors.

Chen Dapeng, President of CHIC and Executive Vice President of China National Garment Association: "The consumers in China develop rapidly, `consumer upgrade´ is the keyword, the Chinese market is consumer oriented, in demand is an individual young style. The offer has to adapt to the needs of this target group, the industry has to become even more innovative and face the technological challenges."

CHIC Shanghai shows that the Chinese market follows the current trends which is also mirrored by its fresh young design and a full visual concept that was developed in cooperation with WGSN. Addressees are the young trendsetting consumers, China´s driving force for the strong growth in retail sales, which increased by 10.2% in 2017 to about 5.7 trillion US$. According to a study by BCG this target group accounts for 65% of consumption increase in China with a predicted growth rate of 11% per year until 2021. The total domestic consumption contributed nearly 60% to the economic expansion of the country in the last year.

Intensive contacts and ordering in all areas of CHIC

The exhibitors of the designer area IMPULSES, one of the core segments at CHIC and occupying the entire North Hall, among them Hua Mu Shen, Shan Zi, Mood for Mode, were very satisfied. In addition to numerous concrete cooperation agreements high value orders were placed as well.

The international exhibitors in the FASHION JOURNEY area came from Brazil, Denmark, Germany, France, China Hong Kong, India, Italy - with 40 exhibitors again the biggest European participation - , Japan, Korea, Peru, Poland, Sweden, Spain, China Taiwan, UK. They expressed their satisfaction with their participations and recognize the potential of the Chinese market. The trade fair objective are contacts, numerous promising cooperation talks took place that need intensive follow-up after the fair. Nevertheless there were also orders placed at the fair. The Polish Investment and Trade Agency participated for the first time in CHIC with its national export program “go-to-brand”. Polish jewellery and kidswear designer brands participated in the program and exhibited at CHIC.

Showing at the leather and fur area HERITAGE the International Fur Federation (IFF) presented itself for the first time with international producers such as the auction houses NAFA and SAGA. Turkey was again represented under the roof of IDMIB / ITKIB by ten companies. For the national participants, grouped in pavilions of the respective Chinese provinces, CHIC is an essential business platform, here they regularly meet their buyers and this time once again registered orders of high sums.

Young brands in the CHIC YOUNG BLOOD area like Monkey King (after the monkey king in the classic Chinese novel The Journey to the West) with manga style shirts or JPE, a trendy street style brand with a traditional Chinese dragon being its mascot, made more than 300 contacts with concrete cooperation intentions at CHIC.

Companies in the segment URBAN VIEW, the menswear area, e.g. RUYI group with more than 30 international fashion brands such as Aquascutum or Sandro; GSON, a menswear line of SEMIR group or ManCode, a new exhibitor at CHIC, reported hundreds of cooperation inquiries and direct deals at the fair.

A sensation in the accessories segment SECRET STARS was created amongst others by the German brand LEONARDO. Large groups of visitors interested in the jewellery collection gathered at the booth. The fair participation beat the company´s expectations by far.

The young generation is the engine for fashion consumption in China, a fact also recognized by the management of the SEMIR group that presented product novelties and its service offer with its kidswear brand BALABALA in the KID´S PARADISE at CHIC. New technologies were shown on more than 500 m² by the HODO group and its "unstaffed shops", "smart fitting rooms", "magic dressing mirrors". Further innovations were "cloud shelves" and "big screen data".

Service platform CHIC

The intensively expanded visitor management, online and offline, was a central aspect of the fair. Online via WeChat and the official CHIC APP more than 200,000 visitor request for specific product groups were made, exhibitors uploaded more than 700,000 pieces of product information. Active exchange was initiated by the Buyer´s Talk on the second fair day, dealing with the development of the buying systems of department stores and shopping malls, trend information was given at CHIC Buyer´s Theme Salon also taking place on day 2. The VIP Buyer´s Meeting brought international brands and interested agents and distributors together - a service that the organizer will expand in the future. “We visit CHIC Shanghai every time, for us it´s a very important platform for trend information and also to find European brands that we can introduce to the Chinese market”, says Wen Liu, CEO Jesery from Wuhan, representative of Canadian designer brand JAC. The management of Mallstyle Investment (Shanghai), with e.g. Italian luxury brands in its portfolio, directly got in touch with German and Italian brands at CHIC after the meeting.

The event schedule of CHIC offers a broad seminar and workshop programme with its CHIC TALK, from trend information to retail solutions to buyer meetings, the show programme CHIC SHOWS staged fashion presentations, of which especially the IMPULSES and OVERSEAS´ JOINT FASHION SHOWS attracted the visitors´ attention. CHIC Shanghai is designed as a global platform for the fashion industry and fashion trade and integrates all resources that are relevant to a successful development of the fashion business in China.

CHIC Shanghai changes autumn date to September

CHIC Shanghai changes together with Intertextile Shanghai, PH Value and Yarn Expo the date for its autumn edition to September. The next fair will be held from September 27-29, 2018 at the National Exhibition & Convention Center in Shanghai.

Color Solutions International, a member of the DyStar® Group, is launching their Color Analysis magazine for Autumn/Winter 2019. This trend forecasting magazine provides high-level global color information for color managers, directors and designers to support the color palette development process. The magazine includes a seasonal color palette selected from a wide range of approximately 3,700 CSI ColorWall™ colors.

Based on most recent customer feedback, the newest edition of Color Analysis was adjusted to be more valuable for the design and palette creation process. This new edition contains 54 trend and validated colors, additional color data, and color evolution & direction by hue. Furthermore, the color trend palettes are displayed by product category: Women’s, Active, Intimates, Men’s, Kids and Home. Similar to the previous editions, Color Analysis also includes our proprietary Relative Color Popularity report (RCP), offering color predictions with validation of performing colors.

“As the Color and Trend Director at Color Solutions, it is my goal to provide relevant seasonal color data collected through consumer insights and market analysis. We are able to look further out for trends that are affected by world views, mindset and cultural influences,” said Heather Sandwall, CSI Color and Trend Director

The CSI and DyStar team of experts work together and assist their customers in color development and communication as well as in the dyeing and quality inspection process to achieve best possible results and sustainable fashion. All CSI products are produced with high-quality, eco-friendly DyStar colorants.

• Yarn Expo Spring’s status as Asia’s leading industry event attracts 15% more buyers
• National Exhibition and Convention Center (Shanghai)
• Shanghai, China, 14 – 16 March

Yarn Expo continued its evolution into the industry’s most comprehensive and effective business platform with its Spring Edition which concluded last week with a large increase in the buyer figure, as well as another year of growth in the exhibitor number. Strong demand was evident for recent growth areas of the fair such as synthetic, fancy and specialty yarns as well as chemical fibres, while exhibitors in the more traditional cotton product group also fared well. In total, 435 exhibitors from 10 countries & regions took part (2017: 393, 12 countries & regions), attracting 25,966 trade buyers from 88 countries & regions (2017: 22,579, 94 countries & regions).

“Once again, Yarn Expo proved itself as the ideal trade fair for the industry to benefit from changing demands and product trends, especially in the Chinese and wider Asian markets,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd explained. “The fair has evolved in recent editions to have a much bigger focus on synthetic, fancy & specialty yarns and chemical fibres, and based on the exhibitor feedback during the fair, there was an increase in buyers sourcing these products this year. What’s more, local buyers were showing strong interest in the offerings from Southeast Asian countries such as Indonesia and Thailand, while Vietnamese cotton exhibitors reported increased orders from China due to the favourable trade policies between these countries.”

As one of the industry’s leading players, Birla Jingwei Fibres naturally plays a big role at Yarn Expo, with their Birla Planet pavilion proving highly successful for the company. Senior Vice President Mr Sachin Malik, explained: “Yarn Expo is a very important platform for Birla, to be visible to our value chain, to connect with our customers, and our own clients’ customers. We value Yarn Expo as a long-term partner for showcasing our products and connecting with the value chain. Each edition we connect with more and more buyers, and more customers in the industry recognise the importance of this fair. It has developed into a premium event in the global textile industry calendar. Usually this edition is quieter than the autumn fair, but the results this year saw the spring edition reach the same level. Our booth was always packed with buyers, and we also received more high-quality and international buyers. Our pavilion members are also very satisfied with the buyers and their results this time.”

Exhibitor comments

Indonesia

“Yarn Expo is an ideal platform to meet not only Chinese but also global buyers. The fair attracts so many good-quality buyers, and compared to other fairs attracts more of our target buyers. The results this edition have been good. After four years of doing business in China, we’ve found many Chinese customers who are willing to pay for quality. The demand in the China market for high-quality products is growing, in particular because of the shortage of spinning capacity which is made up for by imports. We’ve seen more serious and meaningful buyers that have strong desire for further cooperation this time, and I think the potential of this market will continue to grow.” Mr Anupam Agrawal, Director Spun Yarn Business, PT. Indo-Rama Synthetics Tbk

Korea

“Our booth was so crowded throughout the fair. We had more than 300 buyers visit us, and I guess approximately 30% of them will turn into business after the fair. Our target buyers are fabric and garment manufacturers, and we found a lot of good quality ones here. A wide range of worldwide buyers from different market sectors sourced at our booth, especially big-brand sportswear manufacturers and sourcing offices. We’ve had visitors from China, Europe and many other countries. We are very satisfied with our first Yarn Expo experience, and we expect a very good outcome after the show.” Mr Joo Son, International Sales Team, HJLite

Pakistan

“Yarn Expo is the global meeting platform for all yarn industry players. You have buyers from all over the world here, so it is the best trade platform in Asia to connect with worldwide buyers. We’ve met people from Argentina, Columbia, Korea, Indonesia, the UK and the US. Around 40% of them are new to us. We’ve noticed that everyone is looking for new products nowadays, so we always bring new items. Fancy yarn is getting more common in China, and demand is growing steadily. China is definitely a huge market for us to develop.” Mr Mohammad Saad, Director of Abtex Intl Ltd

India

“Yarn Expo is really helpful in that it has a diverse buyer profile and attracts buyers from around the world. We managed to talk to customers from Pakistan, India and Colombia, as well as potential Chinese buyers who are very interested in our products. The buyers have been genuine with specific sourcing needs, and some of them have already placed orders.” Mr N. Sarawgi, Representative of Madhusudan Rayons Pvt. Ltd

Thailand

“This edition we brought our new Kapok material to the fair for the first time. It has been the most popular product at our booth. In recent editions, we’ve also met more and more garment factories asking for customised fancy yarn to make their products competitive and unique, while eco-friendly and natural yarns are also more popular. Yarn Expo is the platform we announce our new products and technologies, and the feedback from buyers from around the world can help us improve them and learn the latest market trends. The fair is of great value for our market strategy.” Mr Warakorn Bunkanokwong, Export Sales Manager, Kongkiat Textile Co Ltd

Singapore

“We are here to explore the China market, but are also glad more customers from Europe and America visited our booth. Many of the buyers here are at the decision-making level, so can give us clear requirements and advice about our products. This is a highly effective fair to meet Chinese buyers to learn first-hand what the market needs.” Mr Rahul Gupta, Marketing Manager, Texvista Intl Pte Ltd

Vietnam

“Yarn Expo is a great chance to meet our existing partners and find new buyers. Compared to China cotton yarn, we still have an advantage in price and quality which attracts a lot of buyers to our booth. Yarn Expo provides us with a quick way to tap into the Chinese and Asian markets.” Mr Du Xuan Cuu, Trade Director, Hanam Textile Co

Uzbekistan

“The Chinese market is important to us, so we chose to exhibit in Yarn Expo. We have met many buyers here, and each year we can find new customers through Yarn Expo. The international nature of this fair is also beneficial for our business.” Mr Dilshod, Export Manager, Exoeast Trade LLP

China

“Yarn Expo is the largest platform in Asia. Compared to other fairs, the buyers here are of higher quality; genuine buyers make up a large portion and most of them come with sourcing intentions. Currently, fancy yarn is in great demand in the market. The number of customers looking for such products is significantly higher this year, and Yarn Expo can effectively help us capture this demand.”
Ms Stella Gan, Sales Manager, Jin Dun Textile

Buyer comments

“We can find all ranges of cotton yarn, fancy yarn and chemical fibres at Yarn Expo. Most of the famous brands are here, and they bring the latest technologies and products, including debut products. Yarn Expo always catches the latest trends in the industry and presents them at the fair. This year the quantity and quality of fancy yarn exhibitors has increased, so I’ve found some products to source already.” Mr Wang Gaofeng, Deputy General Manager, Jiaxing Jinqie Fashion Co Ltd, China

“We mainly came to source fancy yarn this time, and we found many new options. This international show greatly expands our sourcing options. Many of our existing suppliers, including from Indonesia, exhibit at this fair so that’s why we source here. We’re satisfied with the exhibitor quality, and intend to place orders afterwards. There have been a number of new technologies presented here that left a deep impression on us.” Ms Linggar Jati Halim, Director, PT. Kartika Sinar Mulia, Indonesia

“I like this fair as it gathers exhibitors from the entire industry supply chain. As the demand for functional fabrics continues to increase, we can also see this trend in Yarn Expo. Therefore, the fair helps us to learn about the industry’s developments.” Mr Jiang Chang, Marketing Manager, Hangzhou Gaoxi Technology Co Ltd, China

The next Yarn Expo fair, the Autumn Edition, will be held at the earlier date of 27 – 29 September 2018, once again at the National Exhibition and Convention Center. 

Montalvo, international specialists in web tension control, announces its newest product offering, Axial Activated Core Chucks. As part of their “Defender Series Core Chucks,” the Montalvo Axial Activated Core Chuck is designed for shaft-less unwinding and rewinding applications requiring maximum roll/core gripping and/or utilizing floor pick up.
The Defender Axial Activated (DAA) Core Chucks, sometimes referred to as lug chucks, are cost effective, rugged, and durable core chucks capable of withstanding even the dustiest environments while being simple to utilize.
An exclusive “safe lock” model expands the capabilities of the AA core chucks even further by resolving any potential risk of the core not fully tightening and ensuring the roll is always perfectly concentric. Cores are engaged as a result of radial lug expansion as the core is loaded into the chuck, ensuring maximum grip so you can Achieve More.

Montalvo’s Director of Sales and Marketing, Bryon Williams says, “Our new axial activated chucks and total Defender series of core chucks gives our customers a superior product offering in performance, quality, cost, safety, and service life. Axial activated chucks are a cost-effective way to “defend” against core damage, extending their service life while maintaining the highest levels of safety. The drop-in replacement design ensures no additional installation requirements for customers looking to upgrade their current core chucks.”

Additional DAA Core Chuck features include:
•    Rapid Expansion Jaws - ensure secure roll control immediately upon engagement
•    Dual Core Models - for processes utilizing multiple core sizes - one chuck, two core sizes
•    E-Flange™ Option - eliminates operator interaction in removing cores while making core ejection fast and easy; reducing risk of jammed cores
•    Photocell Ready™ Option - allows use of photocell or other sensors
•    Customer Specified Mounting Holes - ready for immediate installation upon delivery
•    Several Finishes Available - Black Oxide standard, Nickel Plating optional
•    Drop-In Replacement Design - for easy upgrading of existing installations

About Montalvo
Since 1947 the Montalvo Corporation has specialized in manufacturing, integrating, retrofitting and servicing a wide range of tension control products for a variety of industries including, converting, paper, film, foil, nonwovens, plastic, corrugated, packaging, medical, composite and more. Montalvo’s products include load cells, tension controllers, tension indicators, amplifiers, tension control brakes and clutches, sensors, safety chucks, and core chucks. Montalvo has four worldwide offices in the USA, Denmark, Germany & China. http://www.montalvo.com

• Nach einer roten Null in 2017 ist Wachstum in Sicht

In der Fashion-Influencer-Szene sind Schuhe ein Top-Thema. Und mit Deichmann gründet Europas größter Schuheinzelhändler einen eigenen Influencer-Club. Dennoch generierte die Schuhbranche 2017 gerade mal eine rote Null. Nur bei Sneaker- und Sportschuhlieferanten lief es richtig gut. Auf Vertriebsseite markiert Marketmedia24 lediglich für den Distanzhandel ein vergleichsweise positives Jahr.
Insgesamt setzen Strukturveränderungen dem Markt zu. Die Gallery SHOES hat als neue Orderplattform für europäisches Schuhbusiness bereits mit der ersten Ausgabe im August 2017 nach den Worten der Messechefin Ulrike Kähler ein „erfolgreiches und mutiges“ Zeichen gesetzt.

Trotz Trendbonus befand sich der deutsche Schuhmarkt 2017 keineswegs auf einem Höhenflug. Vielmehr bleibt der deutsche Schuhmarkt preissensibel. So gaben die Deutschen nach 2016 auch 2017 weniger Geld für ihre Schuhe aus.
„In der Folge lag der Umsatz mit Schuhen im Vorjahr bei knapp 9,1 Milliarden Euro“, so Marktforschungsleiter Karl Oerder, Marketmedia24. Industrie und Handel stehen vor der Herausforderung, den durchaus bestehenden Schuhbedarf und den Spaß am Schuhkauf mit modernen Vermarktungskonzepten zu beleben. Die Voraussetzungen dafür sind gut, so dass die Kurzfristprognosen von Marketmedia24 für 2018 und 2019 jeweils einen Umsatzanstieg erwarten.

Insgesamt geht ein Ruck durch die Branche. Dazu trägt auch das seit August 2017 neu installierte Orderformat Gallery SHOES auf dem Areal Böhler in Düsseldorf bei. Dabei verfolgen die Messemacher kein geringeres Ziel, als das europäische Schuhbusiness kompetent und aussagekräftig abzubilden.
„Das gelingt uns mit einer Marktabdeckung von rund 80 Prozent, was enorm ist“, bekräftigt Ulrike Kähler, Managing Director Igedo Company, Project Director Gallery & Gallery SHOES, die sich kurz vor dem Start der zweiten Veranstaltung (11. bis 13. März) über eine äußerst positive Resonanz von allen Seiten freut. „Das neu geschaffene Format lebt von der neuen Location, Marken vor einem coolen, zeitgemäßen Passepartout im Industrial Design abzubilden. Dass diese Location aus Platzgründen Markense-lektion erfordert, ist der Preis für die Schönheit des Ambientes, das Schuhbusiness in Düs-seldorf frisches Leben eingehaucht hat.“

Selection, kuratierte Sortimente und hoch emotionale Darstellung sind auch auf Handelsseite ein guter Rat für attraktive Flächen. Zwar bleiben die Schuhkunden und -kundinnen äußerst volatil. Besonders seitdem einerseits Onliner Kaufbequemlichkeit und andererseits stationäre Wettbewerber jenseits traditioneller Schuhhandelsstrukturen eine neue Emotionalität ins Kauferlebnis brachten. Innovative Geschäftsideen aber wie Sneaker-Stores machen vor, was funktionieren kann. Denn in der Breite wird sich der Wettbewerb weiter verschärfen und rückläufige Frequenzen unprofilierten stationären Anbietern noch mehr zusetzen.

• New collaboration of sustainable viscose suppliers formed in China

Digital Printing Zone debuts at Spring Edition
Despite the economic ups and downs in China over the last few years, demand for premium European textiles remains high.
Whether it be premium wool for the flourishing suiting market, ladieswear fabrics, lace & embroidery for high-end domestic brands each with hundreds of stores across the country, innovative yarns & fabrics for the booming sports and activewear sectors, or original pattern designs for the thousands of new online fashion brands, European suppliers remain the go-to option for Chinese buyers looking for quality and style.

As one of the undisputed leaders in the European textile scene, Italy is always a good bellwether of the trends between Europe and China. After a less than stellar 2016, Italy’s fabric exports to the Mainland China and Hong Kong markets grew by 12.4% in the first 10 months of 2017[1]. The expected demand for European brands at Intertextile Shanghai Apparel Fabrics will be most evident in the SalonEurope zone, which features exhibitors from Austria, France, Germany, Italy, Spain, Switzerland, Turkey and the UK, as well as country pavilions & zones from France, Germany, Italy and Turkey.

There is also continuing demand for overseas expertise when it comes to more technical areas such as sustainability and digital printing, solutions to which can be found in the fair’s All About Sustainability area and Digital Printing Zone.

SalonEurope showcases the continent’s full textile expertise
The best of the best from Europe will be on display in this edition’s SalonEurope, with a range of products across the whole textile spectrum on offer. Some of the highlights this edition include:

• Alumo (Switzerland): celebrating its 100-year anniversary this July, Alumo has undertaken a complete refresh of their brand, highlighting the character of their mill in Appenzell, Switzerland that has deep roots in the local textile industry. This edition, they will showcase a renewed collection of luxury shirting fabrics with intricate designs and added functions such as natural stretch and wrinkle-free, and a newly enlarged, never-out-of-stock ‘Sartorial’ collection.
• Hatfil Tekstil Isletmeleri (Turkey): a Turkish-Italian joint venture, they offer a huge range of yarns including eco-friendly options such as organic, BCI and fair trade yarns, as well as cotton, Tencel, Amicor, bamboo, cashmere, modal and other varieties.
• Hohenstein Textile Testing (Germany): offering testing services, OEKO-TEX® services and certifications, the Hohenstein Quality Label and more.
• Ricamificio Paolo Italy SpA (Italy): an embroidery manufacturer, they have developed a new technique using very thin embroideries to produce a lace-like effect, which can also be customised to the customer’s requirements in no more than four weeks. They have also produced a quilt-like fabric suitable for spring / summer garments which is made from materials such as silk organdie, cotton yarn or lurex to produce a shiny effect.
• Teseo Tessitura Serica Di Olmeda SpA (Italy): for their summer 2019 collection, Teseo is inspired by the natural elements with increased attention to sustainability with GOTS-certified bio silk and eco-friendly yarns. New articles are lighter and enriched with yarn-dyes, include jacquard stripes and checks, gauze and devoré bands to add transparency, and more.

New collaboration of sustainable viscose suppliers formed in China
While the textile industry in China still has a long way to go in terms of sustainability, genuine progress is being made at both a government and company level. January of this year saw the implementation of a new environment protection tax, with companies charged for noise, air & water pollution and generating solid waste[2]. Replacing a pollutant discharge fee that had been in place for 40 years, the new tax is set by local governments – with some of the regions suffering from worse pollution setting higher rates – and also incentivises companies with lower emissions.

In another encouraging move, 10 leading global viscose producers in China have come together to form the Collaboration for Sustainable Development of Viscose (CV) to promote the sustainable sourcing and responsible production of viscose. These 10 producers collectively account for over 50% of the world’s viscose staple fibre production, and have partnered with two trade associations to adopt a sustainability roadmap for the viscose industry. Built around credible international sustainability standards and programmes, the CV Roadmap aims to provide guidance to viscose producers on sustainable sourcing and production practices.

The CV collaboration will make its debut appearance in the fair’s All About Sustainability zone, where visitors can learn more about this initiative, as well as sustainable developments in the Chinese textile industry. Apart from an educational programme and garment display area, the zone will also feature a number of exhibitors other than CV.

Digital Printing Zone debuts at Spring Edition
While digital printing is rapidly gaining traction in the global textile industry, this is especially so in China due to its potential to reduce pollution during the production process. Amongst the exhibitors looking to take advantage of this in the fair’s new Digital Printing Zone is MS Italy, a market leader in the design, development and distribution of innovative digital ink-jet printing systems and associated consumables, which serves the high-end, roll-to-roll textile printing and specialty material markets. Also exhibiting is DIGITEX which will introduce the latest digital- and inkjet-printed natural and manmade fabrics.

Apart from digital printing exhibitors, a day-long forum will inform fairgoers on the exciting possibilities of digital printing. Held on day 2 of the fair, the Fast Fashion and Digital Printing Application Forum features sessions on fast fashion technology & trends and digital printing applications. These are followed by a series of discussions on topics such as flexible supply chains, business opportunities created by digital printing and IP protection. The forum also includes a presentation on the findings of a six-month study conducted by Fashion Print, a Chinese publication, for which they visited hundreds of textile companies, printing and dyeing enterprises, as well as their suppliers to produce a research paper on the digital textile printing market and technology.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

• Intertextile Shanghai Apparel Fabrics – Spring Edition 2018 is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. For more details on this fair, please visit: www.intertextileapparel.com. To find out more about all Messe Frankfurt textile fairs worldwide, please visit: www.texpertise-network.com.

[1] http://hk.fashionnetwork.com/news/Italian-textile-industry-back-on-growth-track-in-2017,944760.html
[2] http://www.fibre2fashion.com/news/textile-news/china-imposes-environment-protection-tax-beginning-jan-1-239965-newsdetails.html

 

Exhibitor registration is open for Cinte Techtextil China, which will take place with an earlier date of 4 – 6 September this year. Asia’s largest biennial event for the entire technical textiles and nonwovens sector, the fair is held in a region that not only continues to grow strongly but is expected to do so for the foreseeable future, not least due to major government initiatives in China that are injecting billions of dollars of investment into the industry.

“It is due to the increasing opportunities in the Asian market that we are expecting more European exhibitors to feature at Cinte Techtextil China this year,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd outlined. “As the fair attracts a diverse range of trade buyers, including from 12 different application areas such as Buildtech, Clothtech, Geotech, Medtech, Mobiltech and Protech, it is a unique opportunity within Asia for suppliers to meet with the entire industry and maximise the potential of their products across various end-uses and sectors.” While many new European companies are expected this year, some of the returning big brands already confirmed include Trützschler, Dilo and Barnet from Germany, Andritz from France, Stahl from the Netherlands, Itema from Italy and Picanol from Belgium.

Chinese and Asian technical textiles and nonwovens markets continue their upward trajectory
When it comes to technical textiles and nonwovens, the Asian region, and China in particular, is displaying impressive growth, which will remain the case in the coming years.

China overall

•  The total output of technical textiles and nonwoven products is estimated to reach over 22 million tons in 2020, accounting for 30% of global production, and double that of 2013.
•  In 2016, China’s technical textile exports were worth USD 23.61 billion. Nine major products surpassed USD 1.5 billion worth of exports each: medical & hygiene textiles, coated textiles, nonwovens, canvas & tarp textiles, ropes, synthetic leather substrates and package textiles.
• Growth will be seen especially in the following sectors in the coming five years               

                  Filtration & separation textiles
                  Medical & hygiene textiles
                  Geotechnical textil
                  Structural reinforcement textiles
                  Transportation textiles
                  Protective textiles

Nonwovens

• China accounted for 10.5% of global nonwovens imports in 2015.
• China alone will account for around 57% of the Asian consumption of nonwovens from 2016 to 2020.
• According to the China Nonwovens & Industrial Textiles Association (CNITA), the following nonwoven sectors will experience the highest growth in this period:

                 Environmental protection
                 Medical, healthcare and elderly care
                 Emergency services and public security
                 New-energy automotive
                ‘Belt and Road’ supporting industries

Man-made fibres

• China currently accounts for 65% of world market share of man-made fibres, with demand in the wider Asian region expected to remain strong in coming years thanks to growing populations and rising living standards in China and emerging Asian countries.
• The driving force is not only clothing, but also new applications such as the filtration, construction, protection and transportation industries.

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

Among the Aerospace promotions at Hexcel’s booth are carbon-reinforced 3D printed parts, made from Hexcel’s HexAM™ additive manufacturing technology that uses PEKK ultra-high performance polymers. Hexcel acquired this technology from Oxford Performance Materials in December 2017 to provide a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Aircraft engines benefit from a number of Hexcel technologies that will be promoted at JEC 2018, including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.
Another honeycomb innovation from Hexcel is Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs. An example of this technology will be on display at JEC 2018.

Rounding off the aircraft engine exhibits is a CTi fan blade for new generation lightweight turbofan engines from Rolls-Royce, manufactured from Hexcel’s HexPly® M91 high toughness and impact-resistant epoxy prepreg. Hexcel supplies HexPly® M91 as slit tape for the automated lay-up of the complex aerodynamic shape, with a constantly changing thickness across the blade length. The blade which is thinner and lighter than titanium fan blades is currently undergoing flight tests.
Hexcel’s HiTape® and HiMax™ dry carbon reinforcements that were developed for the automated lay-up of preforms for resin-infused aerospace structures will be promoted at the show. Two demonstrator parts, one made with HiMax™ and one with HiTape®, were both infused with HexFlow® RTM6 resin to demonstrate the potential benefits of an integrated design for aircraft skins, spars and stiffeners that meets OEM requirements for production rate increases and cost effectiveness.

Hexcel is also introducing its new range of HiFlow™ advanced liquid resins for aerospace structures manufactured by liquid molding technologies. Based on novel proprietary chemistry, the new resin family will enhance the performance of composites and ease processing when combined with HiTape® and HiMax™ dry carbon reinforcements. HiFlow™ HF610 is the first resin in the range.
Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil last October. Hexcel is relaunching the acquired products under the new HexBond™ brand name at JEC World. This fast-growing range of pastes, liquid shim and film adhesives has a wide spectrum of operating temperatures and is in qualification with a large number of aerospace and industrial OEMs.
In the Planet Aerospace area at JEC, Daher and Hexcel will jointly display an aircraft spar manufactured from HexPly® M56 prepreg. Hexcel’s Neil Parker and Daher R&T Director Dominique Bailly will give a joint presentation focusing on the materials used and the benefits for the finished part. The aircraft spar was designed and manufactured by Daher using Hexcel’s HexPly® M56 prepreg, in slit tape format, that was developed for automated deposition and out-of-autoclave curing. The spar was manufactured using only the vacuum bag process and demonstrates very low porosity levels. It is currently undergoing testing and validation through CORAC funding.

Hexcel’s Automotive promotions at JEC World 2018 include a new prepreg for composite leaf springs, HexPly® M901. In contrast to steel leaf springs used for suspension on vans, trucks and SUVs, newer composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. Hexcel’s HexPly® M901 prepreg raises the bar further, reducing mold cure time below 15 minutes, a 50% reduction compared to standard industrial prepregs. HexPly® M901 provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure. Hexcel’s expertise in manufacturing heavy weight glass UD prepregs, with fiber areal weights of up to 1600gsm, allows the company to offer a highly cost-competitive solution for the rapid manufacture of these safety critical components.

Hexcel is constantly seeking ways to ensure that customers obtain the maximum benefit from composites and has recently acquired state-of-the-art simulation technology that accurately predicts how HiMax™ non-crimp fabrics will drape in a mold. Working in collaboration with Nottingham University Hexcel has created a car seat shell, for which the material selection was optimized using this new drape simulation technology. Visitors to Hexcel’s stand at JEC will see an on-screen demonstration that illustrates how the simulation tool operates, predicting process and performance and ensuring that the optimum fabric architecture is quickly identified, reducing the need for expensive trial programs.
Hexcel’s HexMC®-i 2000 carbon fiber/epoxy molding compound has been successfully used by Audi to manufacture a high-performance engine cross brace. HexMC®-i is a fast curing high-performance molding material, suitable for the series production of complex shaped parts and providing excellent mechanical properties. The Audi cross brace covers the engine, providing torsional stiffness for enhanced drive dynamics.

Hexcel’s product offering for customers in the Marine industry has expanded following the acquisition of Formax in 2016 and Structil in 2017. At JEC World, Hexcel will promote its enhanced portfolio of carbon fibers, prepregs, woven reinforcements and multiaxial fabrics for builders of racing catamarans and luxury yachts.
Marine customers have supplied a number of parts for display to illustrate their expertise in manufacturing composite structures from Hexcel materials. These include part of a Diam 24 yacht mast made by ADH Inotec from Hexcel’s HexPly® M79 fast curing, low temperature cure prepreg. ADH Inotec purchased the prepreg from Composites Distribution, a Hexcel Official Distributor that also supplied HexPly® M9.6 prepreg to Lorima for the Outremer 5X catamaran mast section on display. Part of Lorima’s 42m wing mast for a multihull racing boat made with HexPly® prepreg from Vert-Le-Petit (formerly Structil) will complete the marine display.

Hexcel’s innovations for Wind Energy include Polyspeed® pultruded laminates for load-carrying elements in wind blades. These continuous cross-section profiles, made from a polyurethane matrix reinforced with unidirectional carbon fiber, provide consistently high mechanical properties, including high stiffness, fracture toughness and shear strength, combined with low weight and durability. Visitors to Hexcel’s stand will see a 2m diameter coil of pultruded carbon laminate that contains 255m of material in a single roll. This technology offers an economical way of reinforcing large-scale composite structures such as wind turbine blades. Hexcel will also launch its surface finishing prepreg for wind turbine blades and components. This provides a tough, durable and ready-to-paint blade surface without the use of gel coat and results in faster blade manufacture, saving time in production and reducing material costs. The benefits of the new surfacing prepreg will be demonstrated via a wind blade exhibit that has been given four different treatments across the blade surface. These include a section with gel coat, a section of standard prepreg without gel coat, and a section where a fleece has been added to improve surface quality but still requires preparation before painting due to pin holes. The final section made with new HexPly® XF2P surfacing prepreg has a ready-to-paint surface, straight from the mold, without any requirement for gel coat, fleece or finishing operations.

For the first time at FILO Milano, Filatura C4 is proud to present, in addition to the already established Re.Verso™ collection for contract, the Blue Drop winning fabric by Audejas, made with Re.Verso™ re-engineered wool. A result born from the shared commitment and vision to integrate a new generation of eco values into their circular economy creations.

Since 1962, Filatura C4 has been known for smart innovation in furnishing contract markets and is now specializing in the recovery of both technical and natural fibers. The company offers a wide range of styles and typologies of yarns for the Technical, Natural and Classic categories. From the choice of raw materials up until the final packaging, Filatura C4 develops and proposes, together with its partners, tailored solutions apt to satisfy a diversified demand. Thanks to its background and its grounding, Filatura C4 is a unique partner for Re.Verso™ in the contract sector.

The collection was planned to satisfy the market’s increasingly more specific needs, which require increased specialization and responsibility in the recovery of textile fabrics. Thanks to the Re.Verso™ system, the company offers quality products with low environmental impact through the use of pre-consumer wool packaging cuts which are collected, selected and processed in an accredited, fully transparent and traceable way. The Re.Verso™ collection is mainly employed in contract and home furnishing.

The Re.Verso™ product is available in a range of counts going from 5,000 to 9,500 Nm and it can be supplied both in singles and in twisted plies.  Re.VersoTM yarns by Filatura C4 are certified by ICEA (Environmental and Ethical Certification Institute) according to GRS (Global Recycled Standard) issued by the international body Textile Exchange and can boast unique savings (in comparison to virgin wool) in terms of energy (-27%), water consumption (-53%), and CO2 emissions (-49%), as certified by the LCA (Life Cycle Assessment) study led by Prima Q.

At Filo, Filatura C4 presents the prizewinning product signed by Audejas, leading Lithuanian producer of upholstery and home textile fabrics since 1946, made for the 75% of wool (55% Re.Verso™ wool) in mix with 20% polyamide and 5% other fibres. This product received the Blue Drop Award on the second day of MoOD 2017. MoOD Brussels is an exhibition dedicated to producers of upholstery, window and wall coverings for the residential and contract market. The Blue Drop exhibition is an inspiring overview of the “best of the best” of what you can find at MoOD selected from creations submitted by exhibitors. Unique in its own way because it is the world’s only quality label of its kind for interior textiles. The “Floris” fabric by Audejas, won the first prize of the Circular Material category, being recognized as a  product that made great effort reducing waste by focusing on eco-centric materials.

As the global textile industry’s most comprehensive sourcing summit for the spring / summer season, Intertextile Shanghai Apparel Fabrics is naturally the ideal place to find the latest developments in product innovation and sustainability. This is especially true in the fair’s Beyond Denim zone, which this edition will feature over 110 exhibitors from China, Japan, Pakistan, Turkey and elsewhere. Adding to a total of some 3,300 exhibitors from around 22 countries and regions, they provide sourcing options for the entire industry, from fabrics for ladieswear, menswear, suiting, shirting, lingerie and swimwear to high-end wool fabrics, original pattern designs, functional & performance fabrics, sustainability products & services, digital printing technologies, garment & fashion accessories and more.

Denim enriched with volcanic ash: the latest innovation from Orta Anadolu
Volcanic ash is not uncommon in beauty products – it is known as Mother Nature’s skin purifier after all, and used as an exfoliator for example – but it is far less common in the textile industry. Orta Anadolu are set to change that with their BIOWARE denim which is enriched with mineralised volcanic ash to create an odour absorbing effect. This technology captures and absorbs odour compounds that would normally pass through the fabric, neutralising bad bacteria while retaining the helpful bacteria that common deodorisers, which contain harsh substances, normally eliminate. This leads to a more environmentally friendly product that is better for the user’s skin.

Orta will also be presenting BIOCHARGE at Intertextile, which, according to the company, is the world’s first denim fabric for muscle wellness. Infused with minerals, Orta state that BIOCHARGE is medically proven to refresh muscles, relieve muscle tension and optimise body balance. They will also present their BOUNCE stretch range, with high elasticity and a ‘street’ style, while CHRONICLE, another in their S/S 19 range, is a blend of heritage and future styles.

US Denim Mills blend tomorrow’s technology with yesterday’s style
Another innovative denim firm exhibiting at Intertextile Shanghai, and another blending old and new, is US Denim Mills. According to the company, their collection at the fair will “harness tomorrow’s textile advances to revitalise the great style visions of the past by adding fashion, comfort, performance and sustainability advantages to authentic denim looks.” This collection includes:

• Selvedge: using the company’s legacy selvedge looms to produce bi-stretch ‘SelvedgeX’ while experimenting with blends of natural yarns and high-tech fibre blends in its ‘HeritEdge+’ range
• Stretch: including ‘Flex 360’ bi-stretch denim with a slight cross-bias freedom, and ‘Modern Stretches’ with a higher stretch range for intense comfort
• SoftWear: advanced finishing treatments for superior soft touch from natural fibre blended yarns and softness-selected weaves
• Sustainable: new additions to the range of recycled and natural ‘GreenEgo’ denims

Kipas Denim step up their sustainability efforts
Well aware of the effect denim production has on the environment, Kipas Denim’s multi-faceted programme to address this is one of the most comprehensive in the denim sector. Their recycled yarn initiative includes recycling waste yarn from the production process, while it also takes waste cotton yarn and blends it with REPREVE® fibres to create an eco-friendly denim fabric. Kipas also uses BCI cotton and organic cotton, and targets each to be 15% and 5% of total consumption, respectively. Furthermore, their Conservablue technology aims to reduce the environmental impact of the dyeing process by eliminating the use of rinsing overflow boxes before and after the indigo dye boxes, as well as ensuring 100% of applied dyestuff remains on the yarn in the rinsing bath.

As well as the overseas offerings, a wide range of domestic denim exhibitors covering all price and quality points will also feature in Beyond Denim. Some of the more notable brands participating include Advance Denim, Black Peony, Guangzhou Foison and Prosperity Textile.

Denim’s ‘next move’ to be debated in INVISTA panel discussion
The market is changing and so must apparel and textile manufacturers. Low prices and discounts are no longer driving sales the way they used to. Today’s consumer wants better quality, appreciates new technology and is evolving their casualwear style. This is the premise behind the INVISTA-sponsored panel discussion which will take place on day 1 of the fair. Titled ‘Denim’s Next Move – New Opportunities to Keep Growing Sales of Jeans and Casualwear at Retail’, participants will learn what consumers really want in jeans and casualwear, the return of chinos and new fabric technologies that are energising casualwear.

The panel will be moderated by Jane Singer, Director and Head of Market Development at Inside Fashion. Panellists will include representatives from Advance Denim, Guangzhou Conshing Clothing Group, Prosperity Textile and Texhong who will share their latest innovations that will help brands and retailers drive sales and profits.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.