From the Sector

With the aim of increasing the use of post-consumer fibers in textiles, TEXAID launches a white tote bag. The fabric is a mixture of 50% used textile waste collected by TEXAID in Switzerland and Germany. At TEXAID's largest sorting facility in Apolda, Germany, white cotton textiles that can no longer be worn were sorted out and later spun, woven, and manufactured in Italy. Plastic waste makes up the other 50%. Unifi rescued this ocean-bound plastic waste and recycled it into fiber.

The cotton material was transformed into a fiber by Marchi & Fildi in Biella, IT, which was then spun into a yarn using recycled cotton and recycled polyester fibers. This yarn was woven into textile by Tessitura Casoni.T.F.C.. The care label and flag label were produced by the German company Bornemann-Etiketten GmbH, and an NFC chip from circular.fashion was also integrated into the product. All components were then assembled into this bag in Tuscany by benefit company Alisea Srl Società Benefit with their partner Paimex SRL and also screen printed with our design on it.

This NFC chip is a circularity.IDⓇ digital product passport, developed by the Berlin-based company, circular.fashion. By scanning the NFC chip on the bag with a cell phone, customers are redirected to the circularity.IDⓇ product platform. On this platform, they can find further information on the supply chain as well as instructions on how to refurbish or return the bag for proper recycling. Through this digital product passport, a total transparency over the entire bag production is enabled and for customers it is an easy and quick way to get the information they need.

The chip also allows the manual sorters to getthe product information much faster to make a better sorting decision, e.g. the fiber composition. For this purpose, circular.fashion's intelligent sorting stations are used to scan the chip. Several of these stations have been installed at TEXAID's sorting facility in Apolda, Germany, to facilitate optimized reuse and recycling decisions and ensure another life for the product or fiber.

Mey GmbH & Co. KG, a global manufacturer of underwear, nightwear and lingerie based in Germany, is launching the world’s first men’s nightwear with CELLIANT® Viscose, which converts body heat into infrared energy.

Called mey Zzzleepwear - THE NEW SLEEP-LIFE BALANCE, the collection follows the successful debut of the similarly named women’s collection in 2021. It consists of four designs in Indigo available in T-shirts, short pants, long-sleeved shirts and long pants. CELLIANT works by recycling the heat emitted by the body into full-spectrum infrared energy and then returns it to the body. As a result, it increases the supply of oxygen to the cells and promotes a restful sleep.

CELLIANT Viscose was developed by Hologenix®, creators of CELLIANT, a textile-based infrared ingredient brand, and Kelheim Fibres, a leading manufacturer of viscose specialty fibers. CELLIANT Viscose features natural minerals embedded into plant-based fibers and is biodegradable. It provides all the benefits of being a viscose fiber — lightweight, soft, highly breathable, excellent moisture management — as well as the fiber enhancements from CELLIANT infrared technology. In addition, CELLIANT is durable and will not wash out.

Japan International Apparel Machinery & Textile Industry Trade Show (JIAM) has wrapped up four successful days of business at INTEX OSAKA. From 30 November – 3 December 2022, a total of 10,452 visitors found their way to the fairground. 150 exhibitors from 11 different countries and regions welcomed visitors with an extensive and diverse selection of products. Buyers from Bangladesh, India, Sri Lanka, South Korea, and Pakistan constituted the top five visiting countries (excluding Japan), compensating for a drop in visitors from China this year due to COVID-19 travel restrictions.

Under the theme of "It all connects at JIAM – the forefront of technology and master craftsmanship", the 2022 edition showcased apparel manufacturing solutions catered to each and every need, combining skillsets and knowledge with modern technology. At the opening ceremony, Mr Shinsuke Uchinashi, Chairman of the Japan Sewing Machinery Manufacturers Association (JASMA), commented, "In the new normal, there is growing demand for new technological advancements, productivity improvements, and greater quality control. In addition to solving these pain points, this edition’s exhibitors are also showcasing various innovations in response to automation, IoT, and networking."

A wide variety of special seminars held in Hall 4 were well received. Highlights included a skills training seminar hosted by an emeritus professor and panel discussions by leading companies in the manufacturing industry. SDGs, examples of IoT in industrial sewing machines, and upcycling initiatives were also on the agenda, with visitors gathered around the presented items taking notes.
 
The Home Sewing Zone led by three machine manufactures and JASMA held daily workshops where visitors could learn about upcycling using scraps, and take a break at the café with "cup sleeves" of their own making. Ms Kazuko Mizuochi of JASMA said, "We had a great attendance from the very first day. We were able to familiarize participants with sewing machines and also promote upcycling activities."

The next edition will take place from 27 – 30 November 2024 at INTEX OSAKA.

The UK’s new Business Secretary, Grant Shapps has visited the Henry Royce Institute’ hub in Manchester to seal the second phase of R&D investment in the institute of £95 million. Fibre Extrusion Technology Limited (FET) of Leeds, England had previously installed its FET-200LAB wet spinning system at the University of Manchester site and this proved to be a focus for the Business Secretary’s interest, as he discussed the project with FET’s Research and Development Manager, Mark Smith.

This wet spinning technology enables fibres to be derived from sustainable wood pulp to produce high quality apparel and trials are now underway to perfect this process. FET is a world leading supplier of laboratory and pilot melt spinning systems, having successfully processed more than 35 different polymer types in multifilament, monofilament and nonwoven formats.

During his visit, Shapps spoke of the investment programme as a means of reinforcing the UK’s standing as a leader in advanced materials research, development and innovation.

“R&D investment is a critical way to turbocharge Britain’s growth. Growing an economy fit for the future means harnessing the full potential of advanced materials, making science fiction a reality by supporting projects from regenerative medicine to robots developing new recycling capabilities, right across the country. Today’s £95 million investment will do just that, bringing together the brightest minds across our businesses and institutions to help future-proof sectors from healthcare to nuclear energy.”

The Henry Royce Institute was established in 2015 with an initial £235 million government investment through the Engineering and Physical Sciences Research Council and the latest £95 million sum represents the second phase of the investment.

Opportunities being investigated by Royce include lightweight materials and structures, biomaterials and materials designed for reuse, recycling and remanufacture. Advanced materials are critical to the UK future in various industries, such as health, transport, energy, electronics and utilities.

From February 8th to 11th, 2023, the third edition of IFCO, Istanbul Fashion Connection will take place in the Istanbul Exhibition Center.

The fair with over 600 exhibitors in 9 halls gives an overview of the new collections in the areas of womenswear, menswear, kidswear, denim, shoes, leather & furs. Separate platforms at IFCO are LinExpo for lingerie and hosiery and FashionIST with a wide range of wedding dresses, evening wear and suits. IFCO Sourcing, a new area at IFCO, offers the opportunity to find numerous companies for sourcing capacities.

Also new is the partnership with Igedo Exhibitions, Düsseldorf, which is responsible for the EUROPEAN SELECTION area at IFCO. International fashion labels present themselves at the fair as part of this participation.

More than 25,000 visitors from over 100 nations from all sales channels, from department stores and boutiques to online platforms from Eastern Europe, the Central Asian markets and the Arabian Gulf region, alongside buyers from Türkiye are expected at the show.

The declared goal of the organizers is to offer a "one-stop shopping solution" with IFCO that shows the creativity of the Turkish fashion scene, enables access to new sales markets and at the same time establishes the connection to potential production partners for supply chain optimization. The competitive advantages of production in Türkiye are evident:
short delivery times, high production quality, young and well-trained employees, the possibility of small minimum order quantities, a vertical textile and clothing industry that allows "one-stop shopping".

The manufacturing sector is an important sector for the industry, with over 80% of companies in Türkiye engaged in this sector. Türkiye has the fastest economic growth among the G20 after Saudi Arabia at 7.6% year-on-year in the second quarter of 2022, according to the Turkish Statistics Authority. Export is one of the most important pillars of growth.

The trade fair concept is being supported by the government with several programs. These include the cooperation with IMA, Istanbul ModaAkademisi, which regularly produces design talents becoming an integral part of the international fashion scene. IMA was founded in 2007 by ITKIB / IHKIB with the help of the IPA I program ((IPA: Instrument for Pre Accession Funds, provided by the EU for the EU candidate countries). Young design talents are brought to the stage at IFCO in cooperation with the ‘’Koza Young Fashion Designers Contest’’.

Es sind Projekte mit Wirkung in Zeiten des Wandels – das verbindet die Titelträger*innen der Kultur- und Kreativpilot*innen miteinander. Jedes der 32 ausgezeichneten Projekte fokussiert sich darauf, Lösungen zu finden, die eine gesellschaftliche Transformation mit kreativer Kraft gestalten – und dabei unternehmerisch erfolgreich sind. Mit der Auszeichnung würdigt die Bundesregierung bereits zum dreizehnten Mal die innovativsten Unternehmer*innenpersönlichkeiten der Kultur- und Kreativwirtschaft in Deutschland.

Claudia Roth, Staatsministerin für Kultur und Medien, betont, dass für die vollständige Entfaltung des gesellschaftlichen und wirtschaftlichen Potenzials die Kultur- und Kreativwirtschaft in ihrer Arbeit unterstützt und ermutigt werden muss: „Die diesjährigen Titelträger*innen zeigen, dass die Branche gesellschaftliche Verantwortung in all ihren Facetten übernimmt und Lösungen für soziale Missstände bietet. Damit diesen zukunftsweisenden Ideen alle Türen offenstehen, müssen wir den kreativen Köpfen in Deutschland Rückenwind geben und sie auf ihrem unternehmerischen Weg begleiten.“

Trendanalyse 2022: Missionsorientierung der Kultur- und Kreativwirtschaft nimmt zu
Die Wirkungsorientierung der 32 Titelträger*innen ist Ausdruck eines Trends in der Kultur- und Kreativwirtschaft. Das zeigt die Auswertung der 700 Bewerbungen in diesem Jahr, die das inotiv-Netzwerk gemeinsam mit den Zukunftsforscher*innen von Third Wave durchgeführt hat. „Jede siebte Projekt-Einreichung formuliert eine präzise Mission, die immer auch eine klare Weltverbesserungsabsicht beinhaltet. Das jeweilig vorgestellte Projekt belegt die Mission faktisch und konkret. Ein solch ansteigender Verbreitungsgrad aktiver Zukunftsgestaltung kann doch nur Hoffnung stiften!“, sagt Zukunftsforscher Jonas Drechsel.

Die diesjährigen Titelträger*innen mit Fokus Mode und Textilien (alphabetische Auflistung)
Avenir Garment
Mit Avenir Garment will der gebürtige Tunesier Aladin Amiri die Zukunft der Mode mit kreativer Streetwear mitgestalten, sie mit sozialer und ökologischer Nachhaltigkeit paaren und Vorreiter einer Modeindustrie sein, die divers, kreativ und verantwortungsbewusst ist. Sein Ziel ist es, Ressourcen, Beratung und Unterstützung zu bieten, um die Visionen junger Kreativer umzusetzen. Ebenso im Fokus stehen die soziale Verantwortung für Produzent*innen in Tunesien, denen faire Löhne und hohe Arbeitsstandards geboten werden sowie die Möglichkeit für tunesische Kreative, ihre Botschaft nach Deutschland zu bringen. Zudem startet Avenir Garment ein Upcycling-Programm, in dem Künstler*innen aus nicht verkauften Textilien neue Produkte schaffen, die kreativ und einzigartig sind.

Fashion Africa Now
Fashion Africa Now ist ein digitaler Informationsraum und ein zukunftsorientiertes interdisziplinäres Netzwerk für Kreative aus Deutschland und Europa, der afrikanischen Diaspora und Afrika, das mit Stereotypen bricht, BIPoC-Perspektiven Raum gibt und neue Narrative erzählt. Das Team von Fashion Africa Now bringt Kreative, Experten*innen und Unternehmen zusammen und kreiert Ausstellungen, Workshops, Podcasts, Mode-Kooperationen, Veranstaltungen und ein Magazin, das sich auch gesellschaftspolitischen Themen widmet – mit der Vision einer aufklärenden, nachhaltigeren und inklusiven Zukunft in der Kreativ- und Modebranche. Fashion Africa Now schafft Sichtbarkeit für marginalisierte Kreativschaffende und repräsentiert die komplexe und vielfältige Welt des afrikanischen Modedesigns.

FEAT Boddies helpwear
„Ich fühl mich wohl in meiner Haut“: FEAT Boddies helpwear möchte funktionale und dabei optisch ansprechenden Textilien für alle Körper entwickeln, die ihre Träger*innen versteht und dabei sanft zu Haut und Körper ist. Das erste Produkt sind LUGGERS, hautfreundliche Oberschenkelbänder, die lästiges Aneinanderreiben vermeiden. Wichtig ist den Gründerinnen dabei, auf Materialien zu setzen, die die Umwelt schonen. Entsprechend verwenden sie nach Möglichkeit recycelte Materialien und lassen Luggers unter fairen Bedingungen in Europa herstellen.

FettFressHair
In deutschen Friseursalons fallen jährlich ca. 40.000 Kubikmeter Haarschnitt an – oder anders ausgedrückt: 222.222 Badewannen voller Haare. Ein Rohstoff, der weltweit ständig nachwächst und bisher im Restmüll landet, obwohl er eigentlich Gutes für die Umwelt tun könnte. Denn: Haare sind lipophil, lieben also Fett und fressen es förmlich auf. Somit eignen sie sich bestens, um Verunreinigungen im Wasser aufzunehmen. Das macht sich FettFressHair zunutze und baut aus dem anfallenden Haarschnitt innovative Schadstoffsammler in Form von Schlängeln, Matten und Vliesen. Auf diese Weise können sie Öle und andere Verunreinigungen aus allen Gewässern filtern. Die Erkenntnisse des Kieler Teams halfen beispielsweise schon den Einsatzkräften in Lima dabei, bei der Beseitigung der Ölkatastrophe im Januar 2022 effektiv zu reagieren. Über die Nutzung im Wasser hinaus prüft das Team stetig neue Einsatzgebiete. So wird aus Abfall Umweltschutz.

Re-Shirt
Was wäre, wenn man Textilien nur kurzfristig bedrucken könnte? Dann würde bei großen Veranstaltungen viel weniger Textilmüll entstehen und sehr viel Wasser gespart werden – 300 Liter für jedes nicht neu produziertem T-Shirt. Deswegen haben Emmy Schumacher und Anna Hadzelek Re-Shirt entwickelt, die erste temporäre Textildrucktechnik. Damit schlagen die beiden Gründerinnen die Brücke zwischen schnelllebigem Gestaltungsbedürfnis und Ressourcen schonendem Mindset.

Revoltech
LOVR – unter diesem Akronym („lederähnlich, ohne Plastik, vegan, reststoffbasiert“) hat Revoltech ein nachhaltiges Textil entwickelt, das aussieht wie Leder und sich auch so anfühlt. Es ist zudem verformbar und abriebfest sowie biologisch abbaubar und recyclingfähig. Das Beste: LOVR hat einen minimalen ökologischen Fußabdruck, da nur 0,3 Prozent der CO2-Emissionen im Vergleich zur Lederherstellung anfallen und auf Chemikalien und Kunststoffe verzichtet wird. Hergestellt wird die Alternative zum tierischen Produkt aus den Nebenprodukten des deutschen Hanfanbaus und pflanzlichen Zusatzstoffen.

INDA, the Association of the Nonwoven Fabrics Industry, has named MaryJo Lilly as its new Market Intelligence Leader. Lilly brings more than 20 years of nonwovens & engineered materials expertise with a background in the disposable, medical and specialty materials industries.

Before starting a consulting firm two years ago, Lilly was Regional Commercial Director of North America for Tredegar Film Products and before that, spent more than a decade as Vice President of Sales at Berry Global in the Health, Hygiene, and Specialties Division growing the personal care and medical markets.

Additionally, Lilly’s leadership experience includes Global Business Director at Clopay Plastic Products and Director of Sales and Marketing for Absorbent Materials at Rayonier Performance Fibers. Lilly holds a Ph.D. from the University of Pittsburgh.

With her industry knowledge and extensive network, Lilly will develop, issue and present reports, presentations and data to support INDA, member decision-making and the industry. She will, through collaboration with market participants and subject matter experts, develop and maintain relevant industry statistics, reports and surveys on the North American and worldwide markets by major segments and processing technologies.

The Japanese textile brand ECOSENSOR™ by Asahi Kasei Advance continues its eco-high tech path and joins ISPO, the influential fashion and textile fair dedicated to sportwear and athleisure-wear, as part of an Asahi Kasei space within the ISPO Brandnew area, presenting its AW 2024/2025 & SS2024 collections, made of high-tech fabrics implementing new-generation values, with the aim of keeping nature, body and mind in harmony.

2022 is a special time for Asahi Kasei as it celebrates its 100th anniversary. This year at ISPO Munich (28-30^th November), Asahi Kasei Group present its innovation world featuring three of its brands: ECOSENSOR™, ROICA™ and RespiGard™.
 
ECOSENSOR™ presents 47 new references that meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™ stands out as a unique eco-high-tech performance proposition in its market. The collection covers the different market applications with 3 items for INNERWEAR, 1 for OUTERWEAR, 13 for SPORT KNIT and 30 for SPORT WOVENS.

New this season is the application of the RespiGard™ by Polypore unique membrane designed for outdoor apparel. Its innovative pore structure is too small for water droplets to penetrate but features high porosity that allows for airflow and moisture evaporation.

In order to show at best the performances and possible applications of the fabrics made with RespiGard™, ECOSENSOR™ will feature at its ISPO space an ad hoc created outfit by the outerwear brand.

Furthermore, the majority of ECOSENSOR™ fabrics are made with sustainable ingredients which are certified by international certifications such as GRS and RCS through a traceable and transparent production process and supply chain.  100% of the stretch articles (representing 35% of the collection) are made with ROICA™ EF by Asahi Kasei, the recycled stretch yarn made from pre-consumer materials. Even the dyeing and finishing phases - key moments for performancewear - have been certified by international labels such as bluesign® or OEKO-TEX® Standard 100.

Hologenix®, creators of CELLIANT®, began 20 years ago with the idea of improving the quality of people's lives and health with an emphasis on non-invasive, natural, holistic healing. Co-founder and CEO Seth Casden became fascinated with the effect infrared has on the body and worked with a dedicated team to develop and market CELLIANT® infrared technology and thus materials science innovator Hologenix came to be.

CELLIANT, a proprietary blend of IR-generating bioceramics that are ethically sourced, is a unique combination of nature and performance. CELLIANT captures and converts body heat into infrared energy for increased local circulation and cellular oxygenation, resulting in stronger performance, faster recovery and better sleep. It is a key ingredient in textiles, spanning both performance and fashion apparel, sleep and lounge wear, bedding, upholstery, uniforms and medical supplies.

The first partnership Hologenix secured was with the Ireland-based fiber company Wellman International Limited, a fully owned subsidiary of Indorama Ventures and a pioneer in recycling technologies. Hologenix still works with them today, a tribute to the company’s ability to form long-term partnerships with like-minded organizations, and their joint project of pure white CELLIANT rPET fiber was shortlisted for a prestigious Drapers Sustainable Fashion Award earlier in the year.

On the brand side, many of the first brands to incorporate CELLIANT were in the sportwear industry, including Adidas, Reebok, Saucony, Eastern Mountain Sports, Sierra Designs sleeping bags and Superfeet insoles.

In 20 years, Hologenix has achieved many scientific milestones, and CELLIANT has been and continues to be rigorously tested by a Science Advisory Board composed of experts in photobiology, nanotechnology, sleep medicine, and diabetes and wound care. The Science Advisory Board has overseen nine peer-reviewed published studies that demonstrate CELLIANT’s effectiveness and the benefits of infrared energy.

Looking ahead, Hologenix is continuing to research applications for CELLIANT in the agriculture industry and wound healing and diabetes. Expansion into the FemTech market with both product applications and scientific research about the benefits of infrared for women’s health issues is also on the horizon.

Renaissance Textile in Laval, France has successfully started up a complete textile recycling line, delivered, installed, and commissioned by ANDRITZ Laroche, part of the international technology group ANDRITZ.

The ANDRITZ textile recycling equipment enabled Renaissance Textile to become the first French recycling platform dedicated to industrial end-of-life textiles. The project aims to produce new fibers from the collected post-consumer apparel, which will be used to weave new recycled fabrics in the end.

The new 12,000 m² plant is equipped with a complete tearing line whose design is the result of close collaboration between R&D specialists from ANDRITZ Laroche and Renaissance Textile, as well as customized trials carried out jointly by the two parties at the ANDRITZ technical center in Cours, France.

The new clothing produced based on this type of circular economy model thus reflects the social and sustainability commitments of Renaissance Textile in terms of decarbonizing the textile industry, the fight against global warming, autonomy in raw material sourcing, and promotion of local staffing, particularly for people who have been unemployed for a long time or are seeking to enter the labor market for the first time. By 2025, for example, Renaissance Textile plans to create no less than 110 direct jobs.