From the Sector

Flexibility, product uniformity and automation are the keys to success for coating businesses in today’s rapidly-changing technical textiles industry, explained Jürgen Hanel, Monforts Head of Technical Textiles, at the recent 1st World Congress on Textile Coating.

Introducing the latest Montex®Coat magnetic roller coating option to virtual delegates from around the world at the conference organised by International Newsletters, Hanel explained why this technology makes perfect sense now

“The magnetic roller system allows a wide range of coatings and finishes to be carried out, while being easy to handle for operators and much easier to clean at the end of the process,” he said. “It provides textile finishers with an expanded range of options due to the fully-adjustable positioning of the magnet within the roller and with four different magnet positions possible, can be set to operate both as a direct coating system and as an indirect coater.”

With traditional dip coating systems, he added, as well as with many standard knife coating technologies, there is always a difference in the tension between the centre and the edges of the wide width fabrics being treated – and hence the amount of pressure with which the coating is applied. With the use of a magnetic roller, equal pressure is applied across the full width of the fabric, with consistent results even at wide widths of over 2.4 metres. In addition, adjusting the roller surface, rather than changing the coating formulation to match the required add-on and viscosity for each coating effect required, leads to much higher output from the line.

Cleaner and less wasteful
The contribution of such flexible and resource-saving new technologies to a cleaner and less wasteful textile industry was a key theme at the congress – held virtually across the four afternoons of February 11th, 12th, 18th and 19th – as was digitalization and the many advantages it is providing.

“A typical integrated Monforts coating line is automated from the inlet feed to the winder,” Hanel told delegates. “Adjustments can also be made simply and easily from the touchscreen and with the new hand-held remote controller which has recently been introduced for the Montex®Coat unit.”

Manual adjustment, he added, is time consuming and needs the attention of an experienced operator or the reproducibility will not be accurate between coating operations. The adjustment by motors allows each coating to be stored and downloaded again for 100% reproducibility.

The motors can be fully controlled from the touchscreen and all necessary adjustments carried out remotely, making switching from one process to another extremely quick and easy.
The accuracy that is now being demanded by today’s most exacting customers is met with an optional carbon fibre roller – especially in dealing with the winding tension required in the processing of materials such as prepregs for composites and other heavyweight fabrics. Typical applications for the Montex®Coat include the finishing of tents and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments can all be accommodated.

“The World Congress on Textile Coating was characterised by some very stimulating presentations and forums between the speakers and a global audience of textile specialists,” Jürgen Hanel concluded. “It truly reflected the high level of positive changes now taking place in not just textile coating, but the entire textile industry. I look forward to the next edition, which hopefully will be a face-to-face event for even deeper level discussions and debate.”

With their recently installed high-temperature unidirectional tape line, Japan-based composites manufacturer MaruHachi enables new opportunities for high-end applications in demanding market segments like aerospace, automotive or others outperforming traditional materials based on PP and PA which are already widely available.

In the first phase, MaruHachi will produce up to 40 tons/year and focuses now specifically on high-temperature thermoplastic uni-directional (UD) tapes and multi-layer sheet laminates. The material is based on high-performance fibers like carbon, aramid, glass or natural fibers and the matrix can be high-performance polymers like PPS, PEEK or other higher temperature polymers, which are much tougher than epoxies and easy to recycle. With a width of 500 mm, a specific weight from 60 to 350 g/m2, depending on the chosen material, the lines can operate under temperatures up to 420 degrees Celsius. Working under these extremely high temperatures allows for better material properties of the final application, higher performance, increased resistance and integrated high-performance functionalities e.g. by overmoulding.

Since 2017, MaruHachi Group is active in the European market in cooperation with Dr. Michael Effing,the CEO of AMAC GmbH, who advises and supports the company strategically. The established, family-owned MaruHachi Group has a strong history in automotive and medical textiles and has been active in the innovative composites market for more than 15 years.

Toshi Sugahara, CEO of MaruHachi: “For many years, we have already been cooperating with domestic and international partners on high-demand applications and therefore, MaruHachi decided now to invest over 1 million EUR in this new line in phase 1, including a funding participation from the Japanese government NEDO. New developments in phase 2 will be be undertaken by end of 2021 on the downstream technologies like the automated preforming and consolidation. With our new products, we want to contribute to significant weight reductions of the final products, thus improve energy efficiency while offering a cost-efficient and high-quality solution.”

Dr. Effing, CEO of AMAC GmbH confirms: „The focus on the niche of high-temperature products based on PPS and PEEK allows MaruHachi on very demanding high-end applications such as structural frames on space and aircrafts, aircraft seats or engine components etc. The tapes are fully recyclable and can be processed e.g. with high-speed with laser-based tape placement machines and robots.”

Dow introduces DOWSIL™ IE-8749 Emulsion, a new generation of durable water repellent finishes for fabrics based on silicone chemistry.

Studies conducted on a variety of textiles substrates based on DOWSIL™ IE-8749 Emulsion treatment demonstrate improved fabric retention compared to standard silicone finishes – thereby providing continued water repellency after multiple washes. Unlike many conventional finishes, DOWSIL™ IE-8749 Emulsion finish does not need to be regularly heat treated to restore the water repellency performance, which is a key advantage for the durability of the final product.

By incorporating a DOWSIL™ IE-8749 Emulsion treatment into their finishing processes, textile finishers receive greater control over the hand feel of the fabric - an important parameter driving consumer choices today. Depending on specific need, this can range, from a very soft hand feel that is characteristic of silicone when used alone, to a firmer hand with the addition of cross linkers.

The technology powering DOWSIL™ IE-8749 Emulsion was developed through a collaboration between Dow and Nicca Chemical.

Swedish commission dyeing company 7H Färgeri is looking to propel itself to the forefront of sustainable fabric production with the installation of the first industrial scale imogo Dye-Max spray dyeing line.
Currently under construction, the line will be delivered in the first week of March to the 7H plant close to the Swedish city of Borås. It will have a full working width of 1.8 metres with an operating speed of up to 50 metres for the reactive dyeing of cellulosic fibre-based fabrics. In addition, it will be capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing the company with unbeatable flexibility in production.

A proven Mini-Max laboratory unit for pre-determining application volumes and colour matching will also be delivered as part of the contract.

With the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems, the DyeMax has gained considerable attention since the concept was outlined and a prototype machine constructed in 2019.

Pilot scale trials have subsequently been carried out with many well-known international textile companies and their brand partners.
The application unit of the Dye-Max consists of a closed chamber containing a series of spray cassettes with precision nozzles for accurate and consistent coverage, in combination with the patented imogo Pro Speed valve that controls the volume to be applied.

Control and precision
“We are achieving an extremely low liquor ratio of around 0.5-1 litres per kilo of fabric and we fully control the pickup, applying precisely what is required to the specific fabric,” says imogo founding partner Per Stenflo. “Compared to traditional padders there is no contamination of the dyebath or dilution of the dye liquor to worry about.
Fast changeovers with virtually no waste together with a high production speed enable a high productivity and unmatched production flexibility. The system is also equipped with an exhaust system and droplet separator to ensure that the environment around the unit is safe and free from particles.

The imogo Mini-Max meanwhile frees up valuable production time by avoiding wasteful pre-runs. The user simply sets the recipe with the Mini-Max and transfers the parameters to the Dye-Max recipe database for the system to be fully production ready.

7H Färgeri was founded in 1935 and has established itself as the Nordic region’s most complete dyeing and processing plant, specialising in technical and functional textiles for the automotive and soft furnishings sectors, as well as functional and protective clothing.

The family-owned business is now run by brothers Johan and Peter Engelmann.
“We are pleased to be pioneering a sustainable first for the dyeing industry,” said Johan Engelmann. “Our goal is to offer the market products and services with the highest quality in the most climate-smart and sustainable way, and imogo’s spray technology will give us the opportunity to offer innovative new services and products to both existing and new customers. It will be a very exciting journey.”

World Congress on Textile Coating
On February 12th Per Stenflo will make a presentation entitled ‘Transforming Textile Dyeing’ during the online World Congress on Textile Coating which is held over four days, between February 11th and 19th.

• Inspiring Interiors

Textiles are an inseparable part of the interior as they give a room atmosphere and good acoustics. But which fabric is best suited for which purpose? This month's drapilux  recommendation is drapilux835 and is aimed at classic and modern hotels as well as offices, healthcare facilities and hospitals.

• Nature-inspired lightness: drapilux 835

The translucency of drapilux 835 conveys openness, lightness and a sense of character. This  was  how  Holger  Schön,  Commercial  Property  Manager  at drapilux, described the series. That is the reason why this fabric, with its versatile floral patterns, adorns the four walls of the commercial property manager’s own home: “We live in the suburbs in a rural setting. Consequently, we chose a design with poppies, as this pattern harmonises well in the natural surroundings in which we live.” The fabric also plays a part in the hygiene chain thanks to the intelligent added function of drapilux bioaktiv. Silver ions on the surface of the fibres kill over 99 percent of any bacteria located on textiles.

Lectra announces its plan to acquire the entire capital and voting rights of US-based Gerber Technology. A key Industry 4.0 player in the fashion, automotive and furniture industries, Lectra designs smart industrial solutions – software, equipment, data and services – that help brands, manufacturers and retailers develop, produce and market their products.

The acquisition, if and when consummated, would allow Lectra to complement its market position and continue to enhance its offerings based on Industry 4.0 technology that will enable its customers to boost the productivity and profitability of their operations. After the French work council of Lectra is consulted and the binding documentation is signed, completion of the acquisition shall remain subject to merger control clearance and other customary conditions and shall be submitted to Lectra shareholders for approval.

The proposed combination would occur at an opportune time for both companies and their customers. The current uncertain economic climate and unprecedented challenges that fashion, automotive and furniture companies are facing due to the COVID-19 pandemic make it more important than ever for them to transform, digitalize and optimize their operations.

For over 50 years, Gerber Technology has used its proprietary technologies and deep domain expertise to provide integrated software and automated hardware solutions to companies around the world, including over 100 Fortune 500 companies in 134 countries.

The strategic combination of Gerber Technology and Lectra will create a premier advanced technology partner, able to quickly meet changing customer needs and deliver even more value through seamlessly integrated solutions. Together, the two companies will have a large installed base of product development software and automated cutting solutions in operation, with a worldwide presence and a long list of prestigious customers.

Consolidating the two companies’ research and development capabilities will enable the combined company to accelerate development of Industry 4.0 technologies and help its expanded customer base seize the full potential of these innovations.
Integrating the technology of the two companies will endow them with the resources to anticipate and address rapidly changing market conditions.

Key transaction terms

Under the proposed acquisition, Lectra would acquire all outstanding shares of Gerber Technology on a cash-free debt-free basis for an upfront payment of 175 million euros – through a combination of cash and debt – plus 5 million newly issued Lectra shares to AIPCF VI LG Funding, LP (“AIPCF VI LG”), an affiliate of American Industrial Partners that is Gerber Technology’s sole shareholder. This would represent a total amount of about 300 million euros based on Lectra’s closing share price on February 5, 2021. No contingent consideration is contemplated.

Gerber Technology’s revenues was 165 million euros in 2020.

Thanks to the strong value creation deriving from significant synergies, Lectra expects the transaction to be accretive for shareholders from 2022.

Upon closing, Daniel Harari would own c. 14.6% of the Lectra shares and AIPCF VI LG would own c. 13.3%.

Lectra’s Board of Directors would welcome a director representing AIPCF VI LG.

Daniel Harari would continue to be the Chairman and Chief Executive Officer of Lectra. Gerber Technology Chief Executive Officer, Mohit Uberoi, would assume special advisor to Daniel Harari role until end-2021.

Lectra’s shareholders would be invited to vote on the issuance of the 5 million new Lectra shares reserved to AIPCF VI LG at a dedicated Extraordinary Shareholders’ Meeting which is currently expected to be held on April 30, 2021. A report containing additional information will be made available to the shareholders prior to the Extraordinary Shareholders’ Meeting.

Lazard is acting as exclusive financial advisor to Lectra, and Latham & Watkins as legal counsel to Lectra.

Goldman Sachs is acting as exclusive financial advisor to AIPCF VI LG, and Ropes & Gray LLP, Baker Botts LLP and Gide Loyrette Nouel A.A.R.P.I. as legal counsel to AIPCF VI LG.

2020 results, update on the 2020-2022 strategic roadmap and guidance for the coming years will be disclosed on February 10, 2021.

Lectra management will discuss the transaction, provide forward-looking guidance for the combined company upon closing of the transaction and answer questions from the financial community during the February 11, 2021 webcast Analyst Conference meeting in French starting at 8:30 am (CET - Paris).

Der Aufsichtsrat der Dr. Zwissler Holding AG hat zum 01.02.2021 Herrn Günter Eizenhöfer als weiteres Vorstandsmitglied bestellt.

Herr Eizenhöfer wird die Vorsitzende des Vorstands, Frau Dr. Ulrike Neu-bauer, als Vorstandsmitglied bei der strategischen Weiterentwicklung des Vorstands unterstützen. Er übernimmt Verantwortung für das Ressort Vertrieb, Entwicklung und Operations.

Herr Eizenhöfer bringt einen breiten Erfahrungsschatz aus Managementpositionen in diversen Industrien mit, u.a. auch von Unternehmen der Automobilzulieferindustrie. Er hat verschiedene Managementpositionen im In- und Ausland wahrgenommen und sich zuletzt als geschäftsführender Gesellschafter einer Unternehmensberatung mit strategischen Themen im Fokus der Automobilindustrie befasst. Dank dieser beruflichen Stationen und diversen Aufsichtsratsmandaten verfügt er über ein solides Wissen aus den Bereichen Prozessoptimierung sowie Neu- bzw. Umstrukturierung.

Reinach, Switzerland, and Westlake, Ohio, 2 February 2021 - Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced a strategic partnership with technology innovator CleanKore, aiming to advance sustainable dyeing processes throughout the denim supply chain.

The agreement will allow Archroma and CleanKore to promote the benefits of each other’s technologies. This includes Archroma’s robust catalog of dyes and specialty chemicals along with CleanKore’s patented process of dyeing yarns at the denim mill that completely eliminates the need for potassium permanganate (PP) spray and laser booster to achieve the bright white abrasion effect in the garment finishing process. The result is a large and circular bright white core with a small ring of indigo dye. The technology does not just eliminate the chemicals associated in the PP spray and laser process, which is much safer for denim workers, it also allows to save significant amounts of water and energy throughout the manufacturing process from fabric to garmenting.

CleanKore initially looked at eliminating potassium permanganate due to its being classified as hazardous if inhaled or ingested, or in case of contact with the skin or the eye. It is also considered very toxic to aquatic life. No new equipment or capital expenses are needed to implement the CleanKore technology, which works on all denim fabric, including dark indigo, sulfur top/bottom and sulfur black.

This is where Archroma comes into the picture. Its global technical team of denim coloration specialists will provide support to denim mills seeking to implement the CleanKore technology and develop the desired looks and effects - with the right colors and chemical systems for their production set-up.

CleanKore estimates that the technology allows to save up to 15 liters of water per garment, or the equivalent to the drinking needs of 5 people per day, and up to 0.51 kWh of energy per garment, or the equivalent of five 100-watt light bulbs on for 1 hour. The CleanKore technology also leads to a 10% to 20% increase in production throughput, as a result of a faster garment wash-down and the elimination of PP spray.

For CleanKore CEO Darryl Costin Jr., the announcement comes at an ideal time for CleanKore: "We have successfully proven the technology with mill partners such as Arvind and other denim mills in Pakistan, Bangladesh, China, Vietnam, Thailand and the United States. The response from the industry has been overwhelmingly positive. Having a partner in Archroma, one that is highly respected for their innovation and emphasis on sustainability throughout the industry, will allow us to take CleanKore to the next level.”

Umberto Devita, Global Indigo Manager at the Archroma Global Competence Center for Denim & Casualwear, adds: "CleanKore is perfectly aligned with the 3 pillars of 'The Archroma Way to a Sustainable World: Safe, efficient, enhanced'. 'Safe' through the elimination of a potentially harmful substance and the protection of the denim workers, 'Efficient' through the reduction of resource consumption, improved productivity and cost-effective profile. And 'Enhanced' through the gorgeous colors and effects allowed with Archroma's innovations and systems, in particular our aniline-free* Denisol® Pure Indigo and Diresul® sulfur dyes. We look forward to help promoting an innovation that will help with many of the challenges facing our denim customers throughout the world. Because it’s our nature."

Paper Converting Machine Company (PCMC) is pleased to announce that Andy Piotter has accepted the position of Business Development Manager, Packaging Systems.

In this role, Piotter will develop the company’s new packaging systems division, which will specialize in creating dynamic, comprehensive and efficient tissue packaging systems for customers around the world.

Piotter brings more than 35 years of experience in developing complete packaging systems for a variety of industries. He joins PCMC after being extensively involved in engineering, sales, and business management and development.

“Andy’s expertise and customer relationships are exactly what PCMC needs as we launch this new business segment,” said Jason Hilsberg, Tissue Sales Director for PCMC. “Creating comprehensive, effective and thoughtful packaging systems requires a unique understanding of technology, capital equipment and the ever-changing tissue environment—and Andy brings all of that, in addition to a passion for customer service. We’re thrilled to have him join our team.”

A polybutylene succinate (PBS) polycondensation system was commissioned at Yingkou Kanghui Petrochemical Co. Ltd. in Dalian in the Chinese Liaoning Province at the beginning of January 2021. The PBS system, for which Oerlikon Barmag Huitong Engineering supplied both equipment and engineering, has a daily production capacity of 100 tons

It is used to manufacture high-viscosity chips for biodegradable films. Consequently, Yingkou Kanghui, a subsidiary of the Hengli Group, is catering to rising demand for biodegradable polymer products – demand that is increasing not just in China, but across the globe. Yingkou Kanghui Petrochemical Co., Ltd., founded in 2011, predominantly produces polyester chips and films. By expanding its portfolio to include the manufacture of PBS products, the enterprise is positioning itself as a pioneer of biopolymer production: In view of the large quantities of plastic waste not just in the oceans, biopolymers are considered the materials of the future.

The new plant at Yingkou Kanghui Petrochemical Co, Ltd. was production-ready with the support of Oerlikon Barmag Huitong Engineering within less than 14 months following contract signing.