From the Sector

Eleven leading companies from six countries founded the Renewable Carbon Initiative (RCI) in September 2020 under the leadership of nova-Institute (Germany). The aim of the initiative is to support and speed up the transition from fossil carbon to renewable carbon for all organic chemicals and materials.

Besides Lenzing, these ten companies are founding members of the RCI, which also form the Core Advisory Board: Beiersdorf (Germany), Cosun Beet Company (The Netherlands), Covestro (Germany), Henkel (Germany), LanzaTech (USA), NESTE (Finland), SHV Energy (The Netherlands), Stahl (The Netherlands), Unilever (UK) and UPM (Finland).

The Renewable Carbon Initiative (RCI) addresses the core problem of climate change, which is extracting and using additional fossil carbon from the ground. The vision is stated clearly: By 2050, fossil carbon shall be completely substituted by renewable carbon, which is carbon from alternative sources: biomass, direct CO2 utilisation and recycling. The founders are convinced that this is the only way for chemicals, plastics and other organic materials to become sustainable, climate-friendly and part of the circular economy – part of the future.

Robert van de Kerkhof, Chief Commercial Officer of the Lenzing Group: „We at Lenzing believe that we need to create strategic partnerships to implement systemic change. Therefore, we support the Renewable Carbon Initiative. First of all, because it is the right thing to do and, second, it is also fully aligned with our corporate strategy. Therefore, we are part of the RCI from the beginning and its commitment to start acting now.”

Michael Carus, CEO of nova-Institute and head of the Renewable Carbon Initiative: “This is about a fundamental change in the chemical industry. Just as the energy industry is being converted to renewable energies, so renewable carbon will become the new foundation of the future chemical and material industry. The initiative starts today and will be visibly present from now on. We want to accelerate the change.”

The main avenues on which the initiative wants to deliver change are threefold. One, the initiative strives to create cross-industry platforms that will demonstrate feasibility of renewable carbon in tangible activities. Two, one main target will be to advocate for legislation, taxation and regulation changes to give renewable carbon a level commercial playing field to play on. Finally, the third avenue will be to create a wider pull for sustainable options by raising awareness and understanding of renewable carbon level amongst the business community and the wider public.

The Renewable Carbon Initiative has made a powerful start with eleven international member companies and the personal support of more than 100 industry experts. The initiative hopes to gain many additional members and supporters in the upcoming months to keep the strong momentum of the initiative. Working together, RCI will support and accelerate the transition from fossil to renewable carbon for all organic chemicals and materials.

In the end, the aim is as complex as it is simple: renewable energy and renewable carbon for a sustainable future. Within the RCI Lenzing will especially focus on further greening up the textile and nonwoven businesses. Here we will promote this concept and encourage our partners to become a part of this vision.

More information about the Renewable Carbon Initiative can be found on www.renewable-carbon-initiative.com.

Sustainability and environmental responsibility are important developments for the current design of productions and products. In order to obtain a comprehensive evaluation of the potential of bio-based composites, the AZL, together with an industry consortium, is investigating the market potential, future applications and relevant technologies for bio-based composite materials. The 5-month market and technology study will start on October 22nd, 2020 and is open to interested companies. Companies such as REHAU, an Automotive Tier 1, Asahi Kasei, Johns Manville, Mahr Metering Systems and several material manufacturers are participating in the study.

Bio-plastics are well established in industry, especially in packaging applications. The market for biopolymers is expected to grow from USD 10.5 billion in 2020 to USD 27.9 billion in 2025. At the same time, bio-based raw materials, such as natural fibers, are available on the market in a cost-effective manner. Composites with wood or natural fiber content are also increasingly used in products.

Dr. Michael Emonts, Managing Partner of AZL: "Together with our partner companies we want to identify hidden business potential for composites with bio-based materials. To do so, we will reapply our established approach for market and technology studies: Based on a detailed market analysis, we will dive deep into the technological evaluation of technologies, applications and business cases.”

Based on a detailed market segmentation, AZL's technology experts analyze the various market segments in terms of their size, growth potential, relevant players and existing and future applications. For the identified applications, the participants in the study will receive detailed insight into the respective technical and legal requirements as well as an overview of value chains, processes and materials. In the following, the strengths and challenges of bio-composites compared to conventional materials are elaborated. The consortium will select the components with the highest potential, for which suitable production scenarios will be developed and analyzed in terms of costs in a business case analysis.

"We are participating in the AZL study to identify and evaluate new product areas with bio-materials. The technological analyses of the AZL studies have already helped us in the past to initiate new developments," says Dr. Steven Schmidt, Director Technology Platforms Materials at REHAU, explaining the motivation for working with the AZL and the industry consortium. "As one of the 50 Sustainability & Climate Leaders, we at REHAU are incorporating environmentally friendly materials into more and more products. Wherever the company is active - from the furniture and construction industries to the automotive industry - REHAU is already developing and manufacturing high-quality products from recycled raw materials. By 2025, REHAU plans to increase its recycling rate across the Group to significantly more than 15 percent and at the same time reduce CO2 emissions by at least 30 percent," adds Dr. Steven Schmidt.

Bio-composites will also be the topic of the upcoming Lightweight TechTalk by AZL on September 29, 2020. Experts from industry and academia will give technology and market insights on sustainability and recycling of composites in 6 presentations. Registration is free of charge at: https://azl-aachen-gmbh.de/termine/recycling-of-composites/.

The kick-off of the project will take place on October 22nd, 2020 in the form of a video conference. Further background information on the project can be found under the following link: https://azl-aachen-gmbh.de/wp-content/uploads/2020/09/2020-251_OP_Bio-Bases_Composites.pdf

Two ISKO I-SKOOL™ 7 looks make their debut at the Graduate Fashion Foundation, part of London Fashion Week, a springboard for new talent striving to bridge the gap between education and industry.

Following an unprecedented academic year, GFF celebrates how the Class of 2020 have adapted and overcome adversity to complete their degrees across 26 fashion specialisms, from Design and Knitwear to Comms, Marketing and Business. London, 17-22 September – To bring together fashion educators and industry leaders and to support their graduates to reach their full potential once they have graduated: this has always been GFF’s main goal for the past 28 years. Now more than ever, GFF continues in its long-standing commitment to share good practice and knowledge and to inspire students to become innovators, environmental leaders, employees, and educators while promoting cultural diversity and inclusivity within an international platform – very much in keeping with ISKO I-SKOOL™ values and approach which resonate throughout the contest’s Denim Awards.

Designers Kotryna Adomaityte and Isabel Hambly from Nottingham Trent University were 2 of the 9 winners of the ISKO I-SKOOL™ 7 Awards, announced in a phygital ceremony held on July 22. The two students were invited to showcase their winning creations at GFF. Kotryna, winner of the ISKO I-SKOOL™ PERICOLO Award by Cadica Group, impressed the audience with her “Wild West Denim” look to London at the GFF Showroom.

Isabel Hambly, winner of the ISKO I-SKOOL™ Best Marketable Product, stole the show with her “Women at war” outfit which was displayed at the Catwalk Show, live-streamed from Samsung KX on September 22. That two of ISKO I-SKOOL™ 7 winners and finalists were part of this important event is proof of the significant role the contest – developed and supported by ISKO – plays in nurturing and championing talent and creativity. This edition’s main concept was world’s citizenship, with the Creative Theme “North, East, South, West – connected by one planet”. The twenty shortlisted finalists were asked to dig into their roots and to approach different cultures, defining and tracking down the geography of the world connecting them through responsibility. In addition to exploring the planet both locally and globally, they were also required to take into account the product life cycle of their outfits – featuring a 5-pocket jeans to interpret their view on the “local” concept and two Denim Show Pieces to reflect their worldwide influences and topics of interest. These were made with top ISKO™ denim fabrics, meeting the designers’ needs and providing a strong sustainable ingredient.

“We are really proud that two of our winners made it to GFF, with which we have many values in common – it marks another important step in their journey” said ISKO Senior Executive ISKO I-SKOOL™ Project Irem Orhun. “All of this goes to show how ISKO I-SKOOL™ plays a fundamental role in providing the foundation to enter the industry more aware of your skills and capabilities.”

• Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity

ST. LOUIS - Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.
For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil  repellents, flame retardants and more.

These systems enable fabric producers to significantly reduce chemical and water consumption, while speeding up production times and eliminating production steps, including drying and bath changeovers when switching fabric colors. “Our customers are major manufacturers in fabric dying, finishing and remoistening, and we want to provide outstanding service and support—even in times like this,” said Rick Stanford, Business Development Leader at Baldwin and the commercial leader of the US installations. “Not only does our precision spray technology enhance productivity in their process, but there is also zero waste, which goes hand-in-hand with the increased sustainability focus in the textile industry.”

In North Carolina, two new TexCoat G4 precision spray systems are now in production with major international vertical manufacturers of outdoor living, performance fabrics and automotive fabrics. In Georgia, a major vertical manufacturer of workwear and protective fabrics installed a sanfor precision spray system, which has helped the customer obtain deeper penetration of moisture into fabrics treated with durable water repellents. In Turkey, three new TexCoat G4 systems were installed in Çorlu, northwest of Istanbul, for a large producer of knit fabrics, such as T-shirts. “In Turkey, the manufacturer purchased and installed one TexCoat G4 system before COVID-19, and the customer was so pleased with the results that, during the pandemic, three more were purchased,” said Simone Morellini, Sales Manager- EMEAR at Baldwin and the commercial leader of the Turkish installations. “The systems were manufactured and installed during the lockdown, and now, all four systems are up and running, and being used heavily on a daily basis.” “With the success we have seen, we plan to apply the same strategies for upcoming installations, including the next one in Honduras: strong local management and customer coordination, combined with  effective remote support during the installation,” said Stanford.

• Gorilla Protect is a new company formed in May this year to promote the Catus face mask – a major leap forward in the effectiveness of personal protection products that are available to consumers in the fight against Covid-19.
• Behind Catus and the new company is Nova Textil, the established fabric finishing company based in Grefrath, Germany, and now run by father and son team Rainer and Oliver Hurtz.

Single stenter

Rainer Hurtz founded Nova Textil with a single Monforts Montex stenter and just five employees in 1999 and has steered its constant development and growth over the past twenty years.

“Our initial focus was on the coating of mainly glass fibre fabrics, awnings and sun protection products for outdoor furnishings,” he said. “We had a great customer who was providing us with so many orders that by 2005 we took the decision to order a second Montex stenter, in a special configuration. This also allowed us to enter the market for blackout and digital printing fabrics. We’ve had a great ongoing relationship with Monforts from the beginning.”

A third Montex stenter line was installed at the company’s Grefrath plant in 2015, by which time the company had grown to 40 people and a major new market had opened up in the supply of fabrics for promotional materials at exhibitions and trade shows.

“We had a fantastic two years in 2018 and 2019 and everything was going great for the first three months of this year, but in April it all came crashing down,” said Oliver Hurtz. “Coronavirus put an end to trade shows in 2020, which had a very serious impact on our business.”

At the same time, however, the company was exploring the potential of a new biocidal product from one of its chemicals suppliers which has both antiviral and antimicrobial properties.

Filtration

“We had already been producing coated fabrics for hot gas filtration and realised that in combination with this new microporous coating we had the basis for a very effective single-layer face mask,” Rainer said. “Achieving this with a single layer product rather than the usual three has resulted in a significant advance in comfort for the wearer and because the mask is able to disinfect itself and helps regulate humidity, it can be worn a number of times without needing to be washed, for greater convenience. It only needs to be washed when it gets dirty and can also be washed up to twenty times without losing its properties, which has to be preferable to single-use disposables.”

Catus face masks are based on 100% woven cotton and the active ingredients in the finish are a reaction mass of titanium dioxide and silver chloride certified to ISO 20743 for their antibacterial effect, and to ISO 18184 for their antiviral effect.

They are proven to  eliminate over  99.99% of the human coronavirus 229 E, with the multiplication of microorganisms such as germs and bacteria prevented by the biostatic action of silver salts and viruses destroyed by oxygen-releasing substances and a mechanism that attacks their fatty envelope. The virus membrane loses its cholesterol content and the virus is inactivated.

Colours

Gorilla Protect next plans to make the masks available in four colours – black, Bordeaux, olive and grey – and is also working on colour branding and printing labels.

“It’s not possible to print on the surface of the mask after it has been coated, but its is possible for volume orders to be printed before the treatment,” Oliver Hurtz said.

“Face masks are going to become an established part of life in the West like they are in Asia and need to be as comfortable and convenient as possible for the wearer,” his father concluded. “With these things in mind, we believe Catus is a significant step forward.”

Belgian textile innovator Devan Chemicals was lauded by Frost & Sullivan for its antimicrobial technology with proven quaternized silane chemistry, known under its trade name as BI-OME®.

RONSE, BELGIUM – The non-leaching attributes of the technology coupled with its ability to reduce microbial mutation make it a potential candidate for textiles where durability and safe human contact are highly valued.

Based on its recent analysis of the European antimicrobial technology for the textile market, Frost & Sullivan recognizes the Belgium-headquartered Devan Chemicals NV (Devan) with the 2020 European Technology Innovation Leadership Award. Devan’s highly relevant antimicrobial technology addresses issues concerning the contamination of PPE and textiles, including the spread of drug-resistant bacteria, viral transmissions, and hospital-acquired infections (HAIs). Its quat-silane technology, due to its non-migrating behaviour, physically punctures the microorganism cell to destroy it without interfering with cell DNA. Notably, it eliminates the adverse effects of leaching antimicrobials while providing high efficiency in the range of 99.9 percent to 99.99 percent, even after multiple washes.

"By providing non-migrating antimicrobial technology for the textile industry, Devan plugs the safety and performance gaps inherent in current inorganic and organic antimicrobial agents. Its antimicrobial technology, unlike silver- or triclosan-based technology, comprises non-migrating monomers and prepolymers such as organo-functional silane," said Monami Dey, Industry Manager, Frost & Sullivan. "The organo-silane polymers are covalently bonded and polymerized to the textile surface as a coating via padding, exhaust, and spraying techniques. The coating forms a non-leaching reactive surface and destroys the microbes on contact, without releasing harmful components into the environment."

Devan CEO Sven Ghyselinck is very happy with the award: “The best practice award is a nice recognition of the hard work we did in the last 6 months to evaluate the performance against viral activity. It’s great to see our efforts didn’t go unnoticed.”

Earlier this month Devan published new test results confirming the high performance virus-reducing capabilities of its BI-OME fabric coating technology on both unwashed and intensely washed fabrics. The Belgian company has worked closely with a series of international third party laboratories to test different fabric substrates against a wide range of enveloped viruses. Before washing, samples treated with Devan BI-OME score very good to excellent (99% and higher according to ISO 18184) results on virus reduction. Different substrates, like polyester, cotton and polycottons, were exposed to enveloped viruses like SARS-COV-2 (known to cause COVID-19), Feline Corona, Vaccinia (the EU standard for enveloped viruses) and Porcine Respiratory viruses. After 30minutes, BI-OME already reduced 99.96% of the activity of SARS-COV-2.

After washing, a decrease in virus reduction performance of coating technologies is normal and expected. However, BI-OME is confirmed to deliver only a minimal reduction, retaining up to 98.5% virus reduction even when the fabric is washed 25 times.

"Devan is working towards sustainability and green chemistry. For instance, its technology does not contain any harmful solvents such as formaldehyde or polychlorinated phenols and fulfills the regulatory obligations of the EU BPR," noted Dey. "Its commitment to promoting sustainability in textile finishes with a strong focus on GMO-free, kosher, as well as halal certifications, and recyclability has given the company an edge in launching new products at an accelerated pace to match customers’ most pressing concerns and demands."

One of those innovations is BI-OME NTL (natural), a natural, bio-based antimicrobial solution that guarantees an optimal freshness and hygiene for textiles. The active ingredient is the well-known Linseed oil, obtained from the dried, ripened seeds of the flax plant. The active ingredients in BI-OME NTL are GMO free, Halal, Kosher and recyclable.

• zwissTEX adds zwissCLEAN MASK BASIC to the zwissCLEAN® antiviral and antibacterial range

zwissTEX is adding a BASIC mask to the zwissCLEAN® range which is particularly suitable when a mask is to be worn over a longer period of time - whether for school, concerts, trade fair visits or air travel. "The special feature of our zwissCLEAN MASK BASIC is that it can be worn for up to 12 hours without any problems due to the breathable material", says Maximilian Schönfließ - Business Development Manager of zwissTEX. "With it even sleeping is possible. And unlike disposable masks it can be washed up to 10 times at 30 degrees. Disposal by type is also possible".

With zwissCLEAN® masks, zwissTEX is a pioneer among manufacturers of antiviral and antibacterial oronasal masks. Unlike conventional models they actively and highly effectively eliminate viruses and bacteria thanks to the latest textile technologies. This is made possible by an environmentally friendly finishing that foregoes the use of silver and zinc. "The formula physically interrupts the cell membrane of the viruses and bacteria - so no development of resistance is possible. In this way 99.9 percent of viruses and bacteria are eliminated within a very short time," says Schönfließ.

The zwissCLEAN MASK COMFORT is recommended for daily protection at shopping, on public transport, at business appointments or similar events. It consists of a three-layer structure and combines efficient antiviral protection with long-term wearing comfort. The outer material and the integrated fleece promote protection against viruses and bacteria. The lower material made of organic cotton guarantees a lasting pleasant feeling on the skin. The mask can be washed up to 30 times, thus replacing up to 210 disposable masks and saving resources sustainably.

The zwissCLEAN® range is being continuously expanded. "In addition to mask production we plan to manufacture antiviral and antibacterial gloves," says Schönfließ. "The test phase is already underway and we will start production of the gloves in the coming weeks.

As the first composites trade show worldwide since the Covid-19-crisis, the China Composites in Shanghai (September 2 to 4, 2020) took up its activity. The show counted about 600 exhibitors and over 20 000 visitors, mostly Chinese locals, attended the exhibition.

Chinese Reach Group under the lead of its president Daniel He represented a large portfolio of European companies and their recent developments through their cooperation with Dr. Michael Effing´s AMAC/Germany, among them Airborne (NL), Textechno (D) and Conbility (D).

Daniel He describes the situation: „The Chinese market is picking up again; a price increase of 7% for glass fibers was announced right before the China Composites Show, on August 25th 2020, which was even leading to a temporary material shortage. Today, the most booming industries in China are wind energy, building and infrastructure and innovation for electric cars. Unlike the rest of the world, where the aircraft industry undergoes a deep decline, in China it takes up by 50 %, which is very promising. Furthermore, we expect half a year for a full recovery of the industry, while the China growth of 2020 is still expected to be between 2 and 4 %.“

Michael Effing replied: “Enabling the composites business between China and Europe is the aim of our cooperation with Reach and with our customers, which are active in digital automatization, testing equipment or cost optimization software. We are very happy to have been present in China through our representant Reach and are looking forward to bridge and overcome the Covid-19-crisis with our upcoming event in Germany, the Composites for Europe in Stuttgart in November and hope to be back to full global business speed at the JEC in Paris in 2021.“

• The Lenzing Group was the first Austrian company to send goods 100 percent “Made in Austria” by train directly to China.
• The train loaded with TENCEL™ fibers reached Xinzhu station in Xi'an on September 05.

Xi’an, China – The Lenzing Group is breaking new ground due to the short-term increase in demand for sustainably produced fibers from Chinese customers. For the first time, the company delivered wood-based cellulosic fibers, which are produced at the Austrian sites in Lenzing and Heiligenkreuz, directly to China by train. Thanks to this new transport route, Lenzing is able to meet the urgent demand of its Chinese customers twice as quickly as by the usual sea freight.

The first complete train with goods 100 percent “Made in Austria” started on August 20 in the presence of Leonore Gewessler, Federal Minister for Climate Action, Environment, Energy, Mobility, Innovation and Technology, His Excellency Xiaosi Li, Ambassador of the People's Republic of China in Austria, Stefan Doboczky, Chief Executive Officer of the Lenzing Group, Thomas Kargl, Board Member of the ÖBB Rail Cargo Group, Erwin Cootjans, Chief Executive Officer of Nunner Logistics, and Erich Hampel, Chairman of the Board of the B&C Private Foundation, at the Vienna South Terminal and reached his destination on September 05 at the Xinzhu train station in Xi'an, China. The train loaded with 41 containers with TENCEL™ branded lyocell and modal fibers and a total value of EUR 1.8 mn, passed a total of 10,460 km in seven countries: Austria, the Czech Republic, Poland, Belarus, Russia, Kazakhstan and China.

The first Lenzing fiber train was received in a grand ceremony on Tuesday, September 08 at the container terminal in Xi'an. Numerous guests, including the Austrian ambassador to China, Friedrich Stift, representatives of the Xi'an Municipal Government, the China Railway Xi'an Group, the Xi'an International Trade & Logistics Park as well as representatives of the Lenzing Group, the China National Textile and Apparel Council, Lenzing customers and the media attended the ceremony.

In his speech, Friedrich Stift, Austrian ambassador to China, emphasizes the importance of international trade and sustainable development: “The delivery of Austrian-made products through the CHINA RAILWAY Express adheres to the sustainable concept of Lenzing. Since China and Austria signed the bilateral railway cooperation agreement in 1994, the two countries have maintained good cooperation in the railway field and will continue to do so in the future. China is Austria's largest partner in Asia, and it is believed that after the outbreak of the corona crisis bilateral trade will normalize in 2021.”

“This is the first time for the Lenzing Group to deliver Austrian-made TENCEL™ branded fibers directly to Chinese customers. The Silk Road has been a main transport route between Europe and Asia since ancient times. Chinese consumers affectionately call TENCEL™ fibers ‘Silk from Heaven’. The China-Europe Express can reduce the transport time between Europe and China by half, thus meeting Chinese customer’s demand for environmentally friendly fibers more quickly”, states Hu Jian, Senior Vice President of the Lenzing Group for North Asia.

Optimum wool dyeing solution aligned to ZDHC MRSL standards

Singapore – Huntsman Textile Effects’ LANASOL® CE dyes, provide the industry with the sustainable alternative to after-chrome dyes for wool. LANASOL® CE dyes offer a consistent, safe and reliable dyeing process that can effectively replace chrome dyes for wool. This helps mills conform to ZDHC MRSL standards and meet the stringent requirements of global brands and retailers.
The use of Chrome VI, including Dichromate, is banned in the ZDHC Manufacturing Restricted Substances List (ZDHC MRSL). Wool processors working for brands and retailers that have adopted ZDHC MRSL must therefore act quickly to finalize their chrome replacement developments.

Developed by Huntsman Textile Effects specifically to meet these challenges, LANASOL® CE is a state-of-the-art chrome-free dye range that allows mills to discontinue the use of after-chrome dyes. LANASOL® CE outperforms traditional after-chrome dyes across the board – at every level of dyeing and processing.

“LANASOL® CE dyes have always been recognized as the leading brand in the wool industry. Our innovative dyeing auxiliaries and successful dyeing systems with LANASOL® CE provide the highest technical performance, helping customers to protect the natural beauty of wool, achieve water, energy and time savings while rendering chrome dyes obsolete,” said Alessandro Larghi, Global Marketing Manager for Wool at Huntsman Textile Effects.

As a champion of a sustainable textile industry, Huntsman Textile Effects has long been a strong advocate for the shift away from after-chrome dyes. Huntsman Textile Effects first introduced LANASOL® CE in 1997, before the introduction of any regulation on the restricted use of dichromate.