From the Sector

Archroma, a global leader in specialty chemicals towards sustainable solutions, and Jeanologia, a world leader in sustainable and efficient technology development, joined forces to launch an eco-advanced alternative to the denim fabric washing process, including in some cases the mercerization, one of the most water-intensive and pollutant processes of denim fabric finishing.

It all starts with the spinning step where the cotton is turned into yarn. The second step is a pretreatment that will prepare the yarn for the dyeing step. The dyed yarn then goes through the sizing process, which is a treatment preparing it for weaving. At this stage, we have obtained a denim fabric that will go through a few more steps. First, the fabric may undergo a washing treatment or, in some cases, mercerizing treatment which consists of treating it with caustic soda in order to obtain a more lustrous, flat and less reddish blue and black denim.

In both traditional ways to clean the fabric, washing or mercerizing, multiple highly water intensive washings are required in order to restore optimal fabric pH and remove unfixed dyestuff and any undesired deposits or impurities from the fabric. One of such impurities released in the washing process is aniline, a substance that is classified as a category 2 carcinogen and considered toxic to aquatic life.

That is why Archroma and Jeanologia decided to team up and develop an alternative to the traditional fabric cleaning process and its subsequent water-intensive and water-polluting washings.

• The breakthrough alternative to the fabric cleaning concept presented by Jeanologia and Archroma combines the use of the aniline-free* PURE INDIGO ICON dyeing system of Archroma, and the water-free** and chemical-free “G2 Dynamic“ finishing technology of Jeanologia.
• The Archroma/Jeanologia solution allows to create aniline-free* denim, and improve the final aspect of the fabric through a fully chemical-free and almost water-free** cleaning alternative treatment.
• The Archroma/Jeanologia solution can also be used with additional Archroma coloration systems such as INDIGO REFLECTION or PURE UNDERTONES.

Umberto Devita, Business Development Manager at Archroma’s Competence Center for Denim & Casual Wear, who was the project leader for this new development, comments: “At Archroma, we strive to develop solutions in line with our principles of “The Archroma Way to a Sustainable World: Safe, efficient, enhanced, it’s our nature”. It was therefore very inspiring to work with a partner who shares the same values of developing efficient new processes to bring all know-how to our customers to maximize value – for denim that looks as good as the good it creates.”

For Jean-Pierre Inchauspe, Business Director of G2 Dynamic at Jeanologia, “this association is another step to change traditional, more polluting and water consuming processes in the textile industry for new ones using technology, improving, and boosting subsequent production stages up to the finishing of the garment, making them more efficient and allowing companies to be more competitive, increase productivity and offer a product that is completely sustainable with high quality.”

Intertextile Shanghai Home Textiles – Autumn Edition is scheduled to hold its 28th edition at the National Exhibition and Convention Center from 15 – 17 August 2022. This leading international trade fair in Asia for home and contract textiles will continue to provide an essential business platform for the industry to meet global sourcing demands. Suppliers can now apply for a booth with an early-bird discount to showcase their trending products.
 
Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd commented: “We were pleased that both the Spring & Autumn editions could go ahead in 2021 to provide a strong platform for exhibitors and buyers to do business and network in person during these challenging times. To allow for global participation in the show, we will continue to offer value-adding digital solutions in the coming Autumn Edition to help international participants to stay connected with their Chinese business counterparts and open up new possibilities into the growing Chinese market. Interactive webinars, live streaming product presentations, plus the featured Online Business Matching platform, will all be featured again in the hybrid fair, along with a variety of concurrent onsite events for in-person visitors.”

The August fair is preceded by the Spring Edition which will be held from 14 – 16 April. It will take place concurrently with Intertextile Shanghai Apparel Fabrics, Yarn Expo, CHIC and PH Value at the same venue.

A place for the entire home textile industry to connect
The 2021 Autumn Edition welcomed 20,106 trade buyers from 41 countries & regions and 749 exhibitors from 10 countries & regions during the three-day fair. The show also saw the return of the Belgium Pavilion, where it once again introduced a selection of high-end and premium products in its 10th consecutive year of participation.

In order to allow buyers to benefit from a time-saving and effortless sourcing experience, Intertextile Shanghai Home Textiles 2022 will once again serve as a hub for an array of home textile product categories, including:

• Bedding, Bath, Kitchen & Table
• Upholstery & Sofa Fabrics
• Curtains & Curtain Fabrics
• Carpets & Rugs
• Wall
• Design & Technics
• Whole Home
• Editors
• Contract Business

Latest trade data (January-September 2021) show a dramatic drop of imports and exports of textile goods between the EU and UK, with significant losses for companies on both sides. The situation is likely to get worse, as the full customs regime between UK and EU has entered into force on 1 January 2022. EURATEX calls on the European Union and the United Kingdom to effectively cooperate to remove the issues in the EU-UK Trade agreement that prevent smooth trade flows.  

All the sectors have been already suffering a significant loss in the past year and textiles has been no exception. Compared to the same period in 2020, between January and September the EU recorded a dramatic fall in imports (-44%, corresponding to almost € 2 billion) and in exports (-22%, corresponding to € 1.6 billion). The data show that the most impacted EU countries on the export side are Italy, Netherlands, Belgium and Germany while on the import side the most impacted countries are Germany, Ireland and France. Among the T&C sectors, clothing articles are facing the most severe drop in both imports and exports, corresponding to a total trade loss of more than € 3.4 billion over the 9 months period. Despite these alarming figures, the UK continues to be the most important export market for EU textiles and clothing.

Concerning the impact on the UK textiles sector, in May 2021 the UK Fashion and Textile Association’s (UKFT) surveyed 138 businesses, including leading UK fashion brands, UK textile manufacturers, wholesalers, fashion agencies, garment manufacturers and retailers.

The results of the survey showed that:

• 71% currently rely on imports from the EU
• 92% are experiencing increased freight costs  
• 83% are experiencing increased costs and bureaucracy for customs clearance
• 53% are experiencing cancelled orders as a result of how the EU-UK agreement is being implemented
• 41% had been hit by double duties  
• The vast majority of the surveyed companies declared they are looking to pass the increased costs on to consumer in the next  6-12 months

The above situation is expected to get worse. Since 1 January, full customs controls are being implemented. It means that export and import rules have become stricter: products should already have a valid declaration in place and have received customs clearance. Export from Britain to the EU must now have supplier declarations and the commodities codes changed.  

EURATEX calls on the European Union and the United Kingdom to effectively cooperate to address, solve and remove the issues in the EU-UK Trade agreement that currently prevent smooth trade flows between the two sides of the Channel. It is causing considerable losses for textile companies both in the EU as well as in the UK. 

Texbase, Inc., a cloud-based data management platform for the textile and consumer product industries, announces a collaboration with the global textile testing partner, Hohenstein.

As a Texbase Lab Connect partner, Hohenstein customers can collaborate, send test requests and receive test reports within Texbase Connect. In addition, data export files for digitized materials can be attached to their specific materials in the system. “Texbase has facilitated an improved workflow for our brand customers. Adding this system to our earlier OEKO-TEX® CertLink project gives our partners easy access to the data they need - in one location - instead of having to manage multiple emails," said Ben Mead, Managing Director, Hohenstein Institute America.

Hohenstein is a global leader in textile testing and innovation, specializing in applied research and development around the human - textile - environment interaction. Their lab testing determines compliance with legal requirements, standards, international specifications and internal quality guidelines. Hohenstein validates performance and safety claims through standard and customized testing and certifications.

Hohenstein and Texbase will both be exhibiting at the upcoming Outdoor Retailer/Snow Show on January 26-28th.

«Armalith^® is the story of my passions. Firstly textiles, which opened the doors to the great ready-to-wear and haute couture houses. Then motorcycling, an incredible vehicle for finding freedom and meeting people. In 2003, I combined these two passions by creating Armalith^® with one idea in mind: to offer the best possible protection to bikers without compromising on the comfort and authenticity of a real pair of jeans. Today, Armalith 2.0^® is the denim of choice for the most prestigious brands for their abrasion protection equipment.» Pierre-Henry Servajean, Armalith^® MK Support manager.

Armalith 2.0 in facts:

• The mechanical qualities of leather with the comfort of denim
• Extreme resistance to cuts, traction, tears and abrasion
• High UV resistance that preserves its mechanical properties
• One layer for resistance that is superior to any lined products

High technology for high security
The heart of the armour is made of UHMWPE (high molecular weight polyethylene). This high resistance fiber comes from aerospace research; it is used for space module re-entry ropes, military armour, mooring cables for offshore platforms and more. This core is then covered with a cotton fiber using an exclusive and patented process, and combined with LYCRA^® dualFX^® technology for a powerful and durable stretch.

High resistance for high protection
High-tech integrated into authentic denim for unique comfort and protection, Armalith 2.0^® meets the most demanding standards such as Darmstadt and Cambridge, which are more scientific than the CE certification.
Armalith 2.0^® is available in 3 grades - A, AA and AAA - to cover all needs from urban use to maximum protection against abrasion. In its EXO (KNIT) form, Armalith 2.0^® can be used as a lining to increase resistance in specific areas without using other uncomfortable solutions.

High comfort for high style
Safety in a single layer of fabric, comfort, softness, stretchability, and style! Armalith 2.0^® is a real denim. Soft, supple, comfortable, breathable and hydrophilic, it allows all the usual textures, dyes, prints and finishing in low temperatures.

Armalith 2.0^® is an ethical and responsible denim

• GRS cotton sourced from Greece.
• Designed in France, manufactured and produced on a single site - spinning, dyeing, indigo, weaving, finishing - at Tejidos Royo in Spain.
• UHMWPE fibre requires half the energy to produce than aramids.
• The UHMWPE fibre used under the ARMALITH 2.0^® patent is continuous (no energy-intensive cracking) and untextured (no energy-intensive texturing).
• All Armalith 2.0^® denim manufacturing processes are carried out at low temperatures: a world first for stretch fabrics.
• No heavy metals used in the pigments, the indigo is made using a slow, cold, waterless process
• Resistant to more than a thousand washes for greater longevity and without loss of elasticity.

Strict protective measures will make the industry meeting possible at the International Conference on Cellulose Fibres in Cologne on February 2 and 3, 2022. The latest innovations will be shocased: from hygiene and textiles to non-wovens and carbon fibre alternatives to lightweight construction applications. Online participation is also possible.

Cellulose fibres show an increasingly expanding wide range of applications, while at the same time markets are driven by technological developments and political framework conditions, especially bans and restrictions on plastics and increasing sustainability requirements. The conference provides rich information on opportunities for cellulose fibres through policy assessment, a session on sustainability, recycling and alternative feedstocks as well as latest development in pulp, cellulose fibres and yarns. This includes application such as non-wovens, packaging and composites.

Live at the conference, host nova-Institute and sponsor GIG Karasek GmbH will grand the “Cellulose Fibre Innovation of the Year” award to one of six highly interesting products, ranging from cellulose made of orange and wood pulp to a novel technology for cellulose fibre production. The presentations, election of the winner by the conference audience and the award ceremony will take place on the first day of the conference.

The conference sessions reflect the current topics of industry and research. “Strategies and Market Trends” provides an overview of the rapid development of cellulose fibres and their technological progress across the fibre market. An analysis of the key cost components of these fibres to benchmark against current cost levels will highlight future opportunities and challenges for novel textile fibres. The session will conclude with an overview of the industry's recent strategies to defossilize the fibre market.

The session “New Opportunities for Cellulose Fibres in Replacing Plastics”, focusses on questions such as: “What impact does the ban on plastics in single-use products have on the industry?” and “What are the latest regulatory issues and policy opportunities for cellulose fibres?”. This part of the conference presents new opportunities for the replacement of fossil-based insulating materials with cellulose-based technologies suitable for use in a variety of applications, from aerospace to mobility and construction.
Institutefor Ecology and Innovation

“Sustainability and Circular Economy” highlights crucial issues with regard to the overall goal of keeping the environmental impact of cellulose fibres low. A core theme of the session is the responsible use of wood and forests. With this objective, the five speakers discuss the importance of circular concepts for cellulose feedstocks. Exciting insights into the important “Hot Button Report” are offered by Canopy. The “Hot Button” report enables the producers of cellulose fibres to better understand the impact their raw materials have on forests and the climate development worldwide.

The full conference programme is available at www.cellulose-fibres.eu/program.

• High performing face stock paper delivers convincing results for multiple applications
• Sappi product portfolio of face stock papers ist being expanded with Parade Label SG from its Gratkorn site

Sappi, manufacturer of numerous packaging and speciality papers for a wide range of markets, is launching the Parade Label SG, a one-side coated face stock label paper that excels in terms of properties such as printability, opacity and stiffness, as well as with its many options for further processing.

• Semi-gloss face stock paper with high-quality performance characteristics
• Suitable for a wide range of applications, e.g. labels for food, non-food, HABA and VIP
• Available in 77, 78 and 80 gsm
• Manufactured in Gratkorn, one of the largest and ultra-modern paper mills in Europe

Sappi offers an extensive range of base papers for wet-glue and self-adhesive labels. With its new Parade Label SG, the company is now introducing a one-side coated, semi-gloss face stock label paper that is approved for direct contact with food and that complies with DIN EN 71 for toy safety. The range of applications includes labels for food, non-food, beverages and health and beauty aids (HABA), as well as for logistics and variable information printing (VIP) due to its excellent thermal transfer printability.

The fibre-based face stock solution guarantees high-quality results in printing and finishing, through the entire production and converting chain. It features high stiffness and resilience, so the label will not be damaged and will fit accurately even after labelling.

Sappi invests in customer proximity
To ensure 100 percent availability and fast delivery of its label papers, Sappi has proactively positioned itself for the future and set the course for reliable production and seamless supply chains – with its plants in Alfeld, Carmignano and Condino. The plant in Gratkorn, where Sappi has invested in new technical equipment, has now been added to the list. With modern production facilities, from paper machines to finishing technology, as well as extensive expertise in the production of coated papers, the site has everything in place to ensure top-class products. Available capacity is being expanded gradually to include the production of Parade Label papers alongside existing graphical grades.

Because of the central location of Sappi’s production site in Gratkorn, Parade Label SG can be supplied quickly throughout Europe and beyond. The short transportation distances save greenhouse emissions and protect the environment; shorter production cycles then enable good availability and fast supply. Parade Label SG is certified for direct food contact and available in grammages of 77, 78 and 80 g/m². Sappi can provide Parade Label SG with FSC or PEFC certificates on request.

Sappi will be presenting its new developments in the field of label papers, among others, at the upcoming LabelExpo Europe in Brussels in April 2022.

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical company, has been recognized as an “Achiever” in the Global Children's Rights and Business 2021 benchmark by the Global Child Forum. The company has been ranked 7th out of 28 global chemical companies and is the only Southeast Asia-based company included in the Basic Materials category this year.

This recognition demonstrates IVL's commitment to supporting children's rights and child-friendly business practices in the workplace, marketplace, and community and environment by adopting Children's Rights and Business Principles (CRBP) of UNICEF. The company has a wide range of initiatives that ensure children’s rights, in line with the UN Sustainable Development Goals (SDGs) of good health and well-being, quality education, gender equality, clean water and sanitation, and decent work and economic growth.

Chief among IVL’s contributions to children’s rights is the Recycling Education program for the younger generation. The program aims at creating awareness and providing knowledge about recycling and waste separation, in which everyone can take part. By supporting youth as a priority, the program aims to educate future business and community leaders how to lead their organizations, communities, and other consumers in doing the right thing to protect our environment. During the past few years, the program has educated almost 50,000 people of which are students from more than 100 schools. Initiated in Thailand, IVL is now expanding the Recycling Education where it operates globally.

The State of Children's Rights and Business 2021 benchmark report is produced by the Global Child Forum, a leading children’s rights organization, and the Boston Consulting Group by surveying 832 large global companies in nine industries and assessing 27 standardized metrics from its Code of Conduct. This report focuses on the rights of children along with sustainability supervision based on publicly available information.

Electronics For Imaging, Inc. is announcing that it will be prioritizing technology investments to accelerate growth in its fast-growing industrial EFI™ Inkjet business to continue to be a leader in the industry of analog-to-digital transition, as well as in its market-leading Fiery® business. As part of this focused strategy, EFI has completed a sale of its eProductivity Software (“EPS”) packaging and print productivity software business to an affiliate of Symphony Technology Group (“STG”). EFI and EPS will continue to collaborate with their joint customers and partners to ensure mutual success.

This realignment allows EFI to accelerate investment into its Inkjet and Fiery business units to capitalize on the growth opportunities available in existing segments the company serves, as well as drive expansion into markets that are beginning the transformation toward digital.

Industrial Inkjet: Capturing Unprecedented Opportunity
The industrial inkjet space is ripe with opportunity in existing and adjacent vertical markets. EFI Inkjet will continue to drive in high-volume, shuttle and single-pass inkjet technology, which the company has currently implemented in award-winning, high-performance products for the Packaging & Corrugated, Display Graphics, Textile, and Building Materials/Decor verticals. EFI will also leverage its industry-leading expertise in hardware, mechanical control software, high-speed electronics, services, cloud-connected devices, and ink innovations to deliver the next generation of versatile, high-volume, superior-quality printers and presses.
 
Following the realignment, EFI is making investments in R&D to strengthen its position in core markets while entering new categories – including the development of technologies to address new applications for the textile space and for packaging.

Fiery: Driving Digital Print Innovation and Growth
The Fiery business unit, under the continued leadership of Fiery Chief Operating Officer and General Manager Toby Weiss, remains as one of the world’s premier DFE providers, enabling the high performance required across many vertical markets including packaging, signage and commercial print with advanced Fiery solutions driving high-end printers and presses from many major equipment manufacturers.

Productivity Software: Investing for Growth under New Ownership
EPS’ new owner, STG, is a private equity firm that focuses on investing in software, data analytics, and software-enabled technology services companies, and will support EPS to deliver enhanced value to its packaging and print customers and accelerate global growth. STG completed this acquisition on December 30, 2021. The price and terms of the deal were not disclosed.
 
Moelis & Company LLC served as exclusive financial advisor, and Sidley Austin LLP acted as legal counsel, to EFI in the sale of EPS. Paul Hastings LLP acted as legal advisor to STG.
 
EFI’s upcoming Connect users conference will be a joint event for EFI and EPS customers. Leaders from both companies will highlight their technology enhancements and product roadmap strategies during the January 17-21 Las Vegas gathering.

At Pitti Uomo, Bemberg™ by Asahi Kasei celebrates the new year exploring the company’s 90 years anniversary and journey. In Florence, Bemberg™ past and present are linked by style: on display are key historic garments worn by icons such as J.F. Kennedy belonging to historic Roman Sartoria Litrico together with Bemberg ™ new visionary claim “Crafted Elegance“.

On January 11^th, Bemberg™ will be at Pitti Uomo 101 featuring an exclusive collaboration with Luca Litrico, head of the Roman historic Sartoria Litrico, founded by his uncle Angelo Litrico in 1951. He became famous for crafting the highest-quality suits for all the most important men of Dolce Vita era, from Richard Burton to Marcello Mastroianni. Its historic relevance has even been recognized by the Ministry of Cultural Heritage, thanks to its archive composed of hundreds of photos and sketches signed by Angelo Litrico himself. For this occasion, Bemberg™ will showcase four historic suits wore by true style arbiters a such as: former US president John F. Kennedy, dolce vita poster-boy Rossano Brazzi, American astronaut James B. Irwin and iconic fashion designer Angelo Litrico. All garments feature stylish linings woven with Bemberg™ fiber disclosing its ductility always in vogue through time. Over the decades, Bemberg™ established heritage in formal lining has expanded into new territories and able to represent also contemporary outerwear styles.
 
“We are so excited to be back in Florence. Pitti Uomo and Italy are the perfect starting point of our journey through style.” says Mr. Koji Hamada, CEO of Asahikasei Fibers Italia, “At our booth visitors can glimpse the link between past and present, our values and chromosomes for the fashion to come.”

Bemberg™ vision is centred around contemporary beauty, and uniqueness – the fibre manufacturing is exclusively taking place in Nobeoka, where its closed-loop circular economy production approach together its transparent and traceable processes are able to guarantee the responsible certified values.
 
Bemberg™ by Asahi Kasei will unveil the second chapter of its journey at Première Vision in Paris with an exhibition where visitors will be able to explore the fashion world, from India to Japan, through fabrics and style of today and tomorrow.