From the Sector

Thermore launches its new product EVOdown®, made of 100% recycled fibers from PET bottles. Thermore EVOdown® bridges the gap between free fibers and traditional padding, delivering the ultra-soft hand and drape of blow-in fibers in a rolled form.

EVOdown® consists of millions of free fibers encapsulated by two containing outer layers. It is light-weighted and has a silky touch.

EVOdown® is another step towards sustainability for the Milan-based company, which has now converted over 97% of its turnover into insulations made of either fully or partially recycled fibers (based on actual sales figures). This brings Thermore closer to an exclusively sustainable product offer. Sustainability has always been part of Thermore’s DNA, as the Group pioneered the use of recycled fibers in the early 80s and mastered it thereafter.

TEXAID with its Spanish subsidiary PERCENTIL enable Springfield to put its commitment to sustainability into action through implementing a circularity pilot project with the aim of giving a second life to second-hand garments. As part of the Tendam Group, who operates more than 2000 stores in 79 countries, Springfield partners with the TEXAID group, leading in the industry of collecting, sorting, reselling and recycling used garments, to launch the R[ECO]LLECT initiative.

Take-Back Program R[ECO]LLECT
With "the future is circular" as their call to action, the project is called R[ECO]LLECT and refers directly to the collection of all second-hand garments in good condition, to meet three clear sustainability objectives of Springfield: reduce the pressure on natural resources, reduce CO2 emissions and reduce the amount of textile waste.

R[ECO]LLECT was launched in May 2022 as a pilot project in 16 Springfield stores in Spain across different cities and provinces.

TEXAID’s Spanish subsidiary PERCENTIL is a strategic partner of Springfield in this step towards sustainability. The motto of PERCENTIL is that "there is nothing more sustainable than what you already have in your closet", and it is an intermediary between people who want to get rid of clothes and those who are looking to buy almost new clothes from brands recognized for their design and quality, but at a much lower price. In this way, textile overproduction is reduced, and the environmental impact is reduced. In addition, PERCENTIL receives the clothes, sorts them and takes care of giving them a second life.

Based on the good business development in all four Business Units as well as the mostly successful passing on of increased costs for raw materials, energy and transport to customers, the Board of Management of SGL Carbon SE expects to exceed the given guidance for the fiscal year 2022. Accordingly, SGL Carbon SE is increasing its sales and earnings guidance for fiscal year 2022.

The Company expects to exceed the upper end of the stated range of its Group EBITDApre (earnings before interest, taxes and depreciation adjusted by non-recurring items and one-time effects) guidance for the fiscal year 2022 of EUR 110 - 130 million and is raising its EBITDApre guidance for 2022 to EUR 130 - 150 million. Correspondingly, EBITpre1 (earnings before interest and tax adjusted by non-recurring items and one-time effects) is now forecasted to be between EUR 70 - 90 million (previously: EUR 50 - 70 million). The sales guidance is also raised to around EUR 1.1 billion for the current fiscal year, originally expected to be at the level of the previous year (EUR 1,007.0 million).

In line with the development of earnings, the forecast for return on capital employed (ROCE) of originally 5% - 7% is raised to 7% - 9%. The expectations for free cash flow remain unaffected by the forecast increase. Free cash flow is still expected to be significantly lower in 2022 than in the previous year (previous year: EUR 111.5 million).

The new forecast for fiscal 2022 has been drawn up on the basis of the prevailing market environment and assumes no deterioration in conditions, in particular due to the war in Ukraine and its consequences for the global economy. In particular, it is assumed that sufficient electricity and gas will be available and production lines will remain in operation. The communicated medium-term targets up to 2025 remain unaffected by the forecast adjustment.

SGL Carbon will publish its 2022 half-year figures as planned on August 4, 2022.

SHIMA SEIKI MFG. will participate in the ITM 2022 International Textile Machinery Exhibition in Istanbul, Turkey.

SHIMA SEIKI will exhibit a wide range of its products, including proposals in seam-free WHOLEGARMENT® knitting technology that offers an alternative to labor-intensive manufacturing in Turkey and other international markets. Featured is the flagship MACH2XS WHOLEGARMENT® knitting machine with original SlideNeedle™ on four needle beds and spring-loaded moveable sinkers with expanded patterning capability, the MACH2VS V-bed machine for producing WHOLEGARMENT® items using every other needle, as well as the compact SWG091N2 for producing smaller WHOLEGARMENT® items and accessories. A brand new proposal in V-bed WHOLEGARMENT® knitting will also be introduced in the form of the N.SVR183 machine. N.SVR123SP features a special loop presser bed that can produce hybrid inlay fabrics with both knit and weave characteristics. N.SVR123SP at ITM will feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch for even greater diversity in knit design. Meanwhile N.SSR112 offers industry-leading technology in an economical yet reliable package made in Japan. Also on display is the SFG20 glove knitting machine.

Demonstrations will be performed on SHIMA SEIKI’s SDS®-ONE APEX4 design system. At the core of the company’s “Total Fashion System” concept, SDS®-ONE APEX4 provides comprehensive support throughout the production supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to production and even sales promotion. Especially effective is the way SDS®-ONE APEX4 improves on the design evaluation process with its ultra-realistic simulation capability, whereby virtual samples replace physical sampling, consequently reducing time, cost and material that otherwise go to waste. The same capability is present in APEXFiz™ subscription-based design software. Installed on personal computers, APEXFiz™ features the same functionality as SDS®-ONE APEX4, but with the added versatility to adapt to different work styles and business environments including teleworking and telecommuting. Digital prototyping using virtual samples on SDS®-ONE APEX4 and APEXFiz™ help to digitally transform the fashion supply chain for realizing sustainable manufacturing. APEXFiz™ will be shown along with SHIMA SEIKI’s yarnbank™ digital yarn web platform that further enhances the realism of virtual samples.

Zhoukou Xuwang Co., Ltd. has successfully started up two new ANDRITZ neXline spunlace lines at its facilities based in Henan province, China. Combining equipment from the aXcess and eXcelle ranges, both lines are dedicated to the production of spunlace fabrics of 30 to 120 gsm made out of viscose and polyester fibers. The ANDRITZ design will allow Zhoukou Xuwang to serve the premium product market, especially for premium hygiene and technical wipes, in China.

The ANDRITZ scope of supply for the two lines included:

• aXcess opening and blending systems
• high-performance eXcelle card and crosslapper
• robust aXcess CA25 carding machine
• efficient Jetlace Avantage hydroentanglement unit

This configuration will enable Zhoukou Xuwang to manufacture high-quality products while reducing raw materials consumption. These goals are further enabled by the installation of an ANDRITZ Asselin-Thibeau crosslapper PRO35-140, generating a uniform profile over the entire web width.

In spite of the difficult circumstances and supply chain disruptions related to the Covid crisis, both spunlace lines were installed smoothly and on time. They quickly went into commercial production, with a line speed of up to 100 m/min and high-performance MD/CD ratio.

The German machinery producer BRÜCKNER used exactly these chances and repositioned itself during the pandemic period. For more than 70 years, the family-run company has been specialized in individual finishing concepts for textiles, technical textiles, nonwovens and floor coverings. The current challenges in the textile industry are serious. The clear increase of the energy costs and the general uncertainty of the energy supply as well as political requirements make a profitable textile production more and more demanding for many companies.

The company responds to this with a newly developed stenter concept with double heating system. Depending on availability, the lines can be operated with gas or oil, but also other combinations with steam or renewable energies are possible. This means that production delays and machine downtimes can be avoided as far as possible. In addition, developed intelligent assistance systems for its machines have been developed that support the machine operator in using the best possible process to operate the line as energy-efficiently as possible. Further energy savings are possible with new energy-efficient motors or heat-recovery and exhaust air cleaning systems. This also helps to avoid harmful emissions.

But many textile producers are also focusing on reducing chemicals. For this purpose, BRÜCKNER's further developed ECO-COAT minimum application unit can make a decisive contribution. Knitted and woven fabrics, but also nonwovens can be finished on one or both sides via different fabric paths. With the minimum application via an engraved roller, a single-sided application of up to 100 g/m² can be achieved. A double-sided and higher application quantity is achieved, for example, by impregnation in the nip. Irrespective of the selected fabric path, a very small liquor reservoir means that only minimal quantities of waste water are produced when changing batches or liquors, and the use of chemicals can also be significantly reduced. In addition, less water has to be evaporated in the subsequent drying process than, for example, in the case of impregnation in a water bath, so the energy requirement is significantly reduced.

On the two upcoming trade fairs ITM in Istanbul and TECHTEXTIL in Frankfurt in June, interested customers can personally get an idea of BRÜCKNER's new developments.

Focus on eccentric screw pumps and pumps for shear-sensitive materials

Improved productivity and increased lifespan and tailored solutions also for the most demanding applications within the chemicals and plastics industries and in PUR applications – these are the convincing arguments with which Oerlikon Barmag is showcasing its precision metering pumps at this year’s ACHEMA between August 22 and 26, 2022 in Frankfurt. The focus is on the new pump for shear-sensitive conveying media and the new eccentric screw pump.

Eccentric screw pumps – robust all-rounders convey any medium
The requirements for pumps are considerable, as the demand for customized solutions for increasingly complex processes is rising. This is particularly true for Oerlikon Barmag’s new eccentric screw pump range. High wear-resistance, increased durability and robust operation – the new pump is tailor-made for conveying highly-filled, high-viscosity and abrasive media, such as filled adhesives, filled silicones and filled casting compounds, for example. The is the multi-stage seal system, which considerably increases the pump’s lifespan. The upstream shaft sealing ring protects the slide ring seal against excessively-fast wear caused by challenging media. In turn, the optimum alignment of the drive shaft – ball bearing-supported and centrally-guided through the shaft sealing ring – prevents any metal debris caused by friction and hence ensures considerably greater durability. Producers benefit from considerably greater productivity, as the pumps’ maintenance intervals and hence machine downtimes are significantly reduced.

New pump for shear-sensitive materials
For increasingly complex customer-specific process solutions, Oerlikon Barmag is now expanding its GA series, developed especially for the challenging conveying of high-viscosity media, to include the GAB51F for shear-sensitive conveying media. The newly-developed pump with its viscosity range of max. 300 Pas is tailored to conveying high-viscosity, shear-sensitive materials such as adhesives and silicones, for example. “The shear forces impacting the medium within the pump are reduced to a minimum as a result of a specially geometry”, explains Thorsten Wagener, Senior Sales Manager within the Pump Construction business unit. The material is conveyed through the pump in an as gentle and low-pulsation manner as possible and metered precisely at the outlet – ensuring it retains its characteristic properties.

High-speed metering pump with sealed product space
The high-speed metering pump has been especially developed for metering poorly-lubricating media. Here, the main benefit is the sealed product space, which extends the pump’s lifespan considerably. The space that comes into contact with the media is limited to the area around the gears. “As a result, the high-speed pump is particularly suited for applications in the chemicals industry, which frequently involve aggressive acids”, comments Thorsten Wagener.

GM series for low-viscosity media
The pumps in the GM and GA series provide precision metering with low-pulsation feeding of the conveying medium. The multi-stage GM pump conveys low-viscosity media (i.e. 250 bar, 100 mPas) even under high pressure and in the most challenging conditions. The square design from the proven GM series is the standard pump for many metering tasks. The development of the multi-stage pump expands the applications range for the GM series considerably. The round 2-stage GM pump has been developed especially for use in high-pressure technology. It masters the particular challenge of conveying small throughputs with low viscosities. The pump is perfect for 0.05 through 20 cm³/rev feed sizes and is excellently suited for use in high-pressure machines for PUR molded parts, foam slab stock, refrigeration unit insulations and sandwich panels, for example.

GA series pumps for high-viscosity media
The Oerlikon Barmag GA range has been especially developed for the challenging conveying of media with higher viscosities. The GA series pumps are available for conveying volumes of between 1.25 and -30 cm³/rev (0.6-144 l/h). They have been designed for pressures of up to 200 bar, for viscosities of up to 1.500 Pas as well as for temperatures of up to max. 225 °C. With this range of pumps, Oerlikon Barmag offers its customers tailor-made solutions for many technical processes in which high-precision and even metering is of paramount importance.

The drum pump – conveying and metering using a single unit
With the drum pump, the Oerlikon Barmag pump specialists have created a pump designed specifically for conveying and metering high-viscosity materials such as adhesives, silicones and other high-viscosity materials from drums and other large containers and for pressures of up to 250 bar. Its special features not only include the fact that it removes high-viscosity materials from the drum, but that it also meters the medium directly without any additional interim stops.

Huntsman Textile Effects, a global leader in innovative solutions and environmentally sustainable products, will be at Outdoor Retailer in Denver, Colorado this week to present end-to-end solutions that enable outdoor apparel brands to achieve the functionality that outdoor adventurers crave with on-trend aesthetics and a high degree of sustainability.

Resource-saving solutions
Huntsman will highlight the AVITERA® SE Fast process. This technology delivers the lowest environmental impact for dyeing polyester-cellulosic (PES-CO) blends. It combines alkali-clearable TERASIL® W/WW disperse dyes and AVITERA® SE reactive dyes to cut processing time from around nine hours to just six, helping mills to reduce the water and energy required for production by up to 50% and to increase output by up to 25% or more. The new process also delivers outstanding wet-fastness to ensure that sportswear will not bleed or stain during home laundering or while in storage or transit.

EROPON® E3-SAVE is another next-generation water-saving innovation. An all-in-one textile auxiliary for PES processing, it allows pre-scouring, dyeing and reduction clearing to be combined in a single bath and eliminates the need for anti-foaming products, which shortens processing time and further saves water and energy.

Eco-friendly stain and rain resistance
Huntsman will also present eco-friendly finishes that repel water and stains to help garments look new for longer. Continuing its long-standing relationship with Chemours, Huntsman is highlighting Teflon™ EcoElite with Zelan™ R3 technology. The industry’s first renewably sourced water-repellent finish, it contains 63% plant-based materials and exceeds performance levels possible with traditional fluorinated technologies, preserving breathability while offering excellent water repellency and durability.

Another breakthrough for brands and mills is PHOBOTEX® RSY for outerwear. A next-generation non-fluorinated water-repellent finish, its performance is comparable to formulations based on per-fluorinated chemicals (PFCs), delivering sustainable protection that keeps the wearer dry, even in the most demanding environments. It is a perfect combination of excellent water repellency and extremely high wash durability.

Innovative odor control solutions
Huntsman will also showcase antimicrobial and odor-control solutions as part of its partnership with Sciessent. Sciessent’s latest anti-odor technology, NOBO™, has been specifically developed to reduce odors in natural and synthetic fabrics. It can be incorporated into virtually any fabric, making it ideal for everything from base layer and activewear tops to socks and underwear to hiking pants, chinos and hard shell jackets. It offers a cost-effective way to upgrade everyday garments.

In addition, the partners will also present Sciessent’s Agion Active X2®, a next-generation odor-control solution that combines advanced antimicrobial and odor-absorbing technologies to both capture and fight odor-causing bacteria, and Lava X2®, a standalone odor adsorption product and key component of Agion Active X2® that attracts, adsorbs and degrades odors for long-lasing odor protection.

The EREMA Group, which comprises EREMA Group GmbH and its subsidiaries EREMA, PURE LOOP, UMAC, 3S, KEYCYCLE and PLASMAC, closed the 2021/22 financial year with a 17 percent increase in revenue. Consolidated Group revenue amounted to EUR 295 million, and the number of employees increased to over 840. The EREMA Group remains on course for continued growth.

A closer look at the post consumer segment clearly shows a trend towards larger plants, both for PET recycling and for processing polyolefins. For example, the first VACUREMA® Basic 2628 T machine with an annual capacity of up to 40,000 tonnes was recently commissioned at a customer's site in Brazil. This plant features a ten-meter-long special geometry screw with a diameter of 280 millimetres and a weight of 3.5 tonnes. The screw was developed and manufactured by 3S, a subsidiary of EREMA GmbH.

Demand for previously-owned machines at UMAC also remained high during the past financial year. In addition to the general trend towards plastics recycling, the decisive factor here is that customers are more frequently opting for previously-owned systems available at short notice due to the tense situation on the procurement markets. At the same time, businesses that have so far had little contact with recycling are also becoming increasingly interested in this topic. Their need for feasibility studies, consulting and engineering services, project management and turnkey projects are now also very successfully catered for by KEYCYCLE, an EREMA Group company. KEYCYCLE has also acquired from Cadel Deinking the patent, technology and distribution rights for an innovative ink removal technology, which is now being further developed using the know-how of the EREMA Group and shaped into a product that meets industrial standards.

The initiative launched four years ago to modernise and expand existing EREMA Group sites was continued during the past financial year with the expansion and construction of a dedicated machine demonstration centre for PLASMAC in Milan. Equipped with additional production floor space and new and enlarged customer centres, all companies within the group are now well prepared to meet rising demand, and with the new research and development centre under construction in Ansfelden, the framework for further outstanding plastics recycling milestones from EREMA is currently being optimised.

90 years of BOGNER are celebrated with the Anniversary Capsule Collection Frozen Riviera. Frozen Riviera draws inspiration from the pioneering figure of Maria Bogner, the woman who made the mountains chic. BOGNER not only adored the Riviera, but also supplied its leading style icons with their winter wardrobes.

The result is a Cross Capsule Collection of BOGNER Sport and Fashion, that represents the future heritage of the brand. A palette of rich blues and off-white is enlivened by gold trim details, depicting an abstract print pattern of waves and slopes that underlines the connection between the Mediterranean and the Alps.

The iconic silhouettes of the past 90 years are reinterpreted for winter and combined with new volumes, techniques and materials - always with an eye to the future. Characterized by modern silhouettes, tonal outfits and a look of loose elegance, BOGNER heritage details meet the latest innovations. The result: Athluxury Sports Fashion.