From the Sector

• Monforts customer Kipaş has been selected as the sole denim manufacturing partner in the €6.7 million European Union-funded New Cotton Project, involving the brands adidas and H&M, working in a consortium with suppliers, innovators and research institutes.

Kipaş, based in Kahramanmaraş, Turkey, is currently installing its third Monforts Montex stenter along with a third Monfortex compressive shrinkage system in a combined configuration dedicated to denim production.

This follows the successful installation and commissioning of the second Montex and Monfortex lines at the Kahramanmaraş plant in 2018, which Kipaş Vice Chairman of the Board Ahmet Öksüz said had immediately exceeded expectations.

“We performed a very thorough technical investigation based on the latest Industry 4.0 analysis before the purchase, to determine what we needed, and the Monforts technology met all our requirements,” he said, in an interview with Textilegence magazine. “The Monfortex is equipped with a variety of features not found on classical shrinkage machines and the production can be monitored from beginning to end. It also exceeded our expectations in energy cost savings.”

Kipaş subsequently received a special certificate from Monforts in recognition of its exceptional utilisation of the technology to its full potential.

The latest Montex stenter now being installed at Kipaş is a 12-chamber unit with a working width of 2 metres featuring all of the latest automation features. The Monfortex unit, also with a working width of 2 metres, is in a ‘double rubber’ configuration, comprising two compressive shrinkage units and two felt calenders in line. This allows the heat setting of elastane fibres and the residual shrinkage of the denim to be carried out simultaneously, for a significant increase in production speeds.

“Around 90-95% of denim fabric production now contains elastane fibres and the Monforts system has allowed us to simultaneously increase our production and quality in this respect,” Mr Öksüz said.

Regenerated cotton
For the next three years within the New Cotton Project, Kipaş will manufacture denim fabrics based on the cellulose-based fibres of Infinited Fiber Company of Finland, made from post-consumer textile waste that has been collected, sorted and regenerated.

The patented technology of Infinited, which is leading the consortium of 12 companies, turns cellulose-rich textile waste into fibres that look and feel like cotton.

“We are very excited and proud to lead this project which is breaking new ground when it comes to making circularity in the textile industry a reality,” said Infinited co-founder and CEO Petri Alava. “The enthusiasm and commitment with which the entire consortium has come together to work towards a cleaner, more sustainable future for fashion is truly inspiring.”

Take-back programmes
Adidas and H&M will establish take-back programmes to collect the clothing that is produced, to determine the next phase in their lifecycle. Clothing that can no longer be worn will be returned to Infinited, for regeneration into new fibres, further contributing to a circular economy in which textiles never go to waste, but instead are reused, recycled or turned into new garments.

The aim is to prove that circular, sustainable fashion can be achieved today, and to act as an inspiration and stepping stone to further, even bigger circular initiatives by the industry going forward.

The EU has identified the high potential for circularity within the textile industry, while simultaneously highlighting the urgent need for the development of technologies to produce and design sustainable and circular bio-based materials. Making sustainable products commonplace, reducing waste and leading global efforts on circularity are outlined in the European Commission’s Circular Economy Action Plan.

Fashion brands produce nearly twice as many clothes today as they did 20 years ago and demand is expected to continue growing. At the same time, the equivalent of one garbage truck of textiles is landfilled or burned every second. Most of the textile industry’s environmental problems relate to the raw materials used by the industry – cotton, fossil-based fibres such as polyester, and viscose as the most common man-made cellulosic fibre, are all associated with serious environmental concerns.

The company, founded in 1993, has established a reputation for leadership in new printing techniques and technologies with customers across Europe, as well as with many of the leading Turkish brands.

Mission
On its mission to achieving continuous progress in error-free and resource-efficient manufacturing, İlay has just taken delivery of a new Monforts Montex stenter range, with a working width of two metres and eight TwinAir chambers.

“This installation provides us with much improved control options for all process parameters and compared to the old stenter it is replacing, we are particularly impressed with the energy savings we are making,” Mr Savaş says.

Achieving energy savings on Montex stenters has been a key focus for Monforts designers and engineers in Germany for many years.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying.

The resulting constant evaporation rate within the stenter ensures optimum energy utilisation. In addition, TwinAir chambers feature special panelling for low heat radiation, careful sealing of all connecting positions and chamber access points, and air locks at both the entry and the exit.

“Monforts stenters set the benchmark in terms of energy efficiency and help conserve resources,” says Ahmet Kılıç, founder of Neotek, the representative for Monforts in Turkey. “Automatically setting the initial moisture content requirement for a specific process before drying to a minimum value helps reduce heat evaporation and consequently, energy consumption. The hermetic sealing of the stenter frame further prevents the loss of heated air as well as the ingress of excessive cold air – which has to be heated back up if it is not kept out in the first place.”

The new Montex line was completed at İlay Textile in August 2020, with no problems during either installation or commissioning.

• An introspective and emotional journey of transformation
• The global leading jersey manufacturer launches a brand-new collection deliberately “raw”, a back to matter, materials and origins as individuals that are able to change and evolve.
   

Another big step of TINTEX Naturally Advanced Evolution

TINTEX has over time established itself as a global leader in smart innovation with its high quality, natural based responsible jersey fabrics using the latest and best sustainable high-tech dyeing and finishing processes, implementing expertly controlled processing to drive material innovation and manufacture a full range of natural based smart materials, optimizing superior and responsible fashion solutions.

The new collection confirms the Naturally Advanced Evolution vision as the right approach:  to work together in a deeper way - textile producers and fashion brands - to develop solutions, innovations with a strong environment-driven approach and cutting-edge technology able to offer contemporary consumer a brand new smart and performing choice.  As result, Raw is a true Naturally Advanced Evolution of the modern human being, explaining a story with no more genders and races, just focused on contemporary values.

The concept behind the AW 21/22 Raw Collection is turning back to nature and to our origins, a journey through emotional, spiritual and physical changes. Thinking about what’s happening around us as planet and individuals in an era of unpredictable challenges, we need to be creative reinventing us every day in different ways, aware of a new society and way of consuming where environment and human needs count.  A unique collection with three different approaches to mix together through a colour palette that goes from raw, dirty beige to a warm pinkish red and a false black-bluish gray.

fluidity, human, natural reconnection. An introspective journey where it’s all about ourselves and who we are. Through light and translucent fabrics, touches of peach and waxes in warm reds and burgundy, we find delicate, natural and extra light fabrics that flow on the skin to symbolically represent the inner fight from who we are and who we want to be. Organic cotton and Tencel™ Modal Micro processed in a special way, are at the center of this stage.
 
raw beauty, reuse, less is more. With this line, the company gives new life to existing articles, showing all the beauty of the raw material and the transformation they went through. This re-transformation of materials reflects the inner transformation; reborn of human beings, of time, of challenges through a new perspective where we reinvent ourselves, home, habits and planet. Our capability, skills to give new life to things it is not something we forgot through time. Organic cotton, Tencel™ Modal Micro, European hemp, Q-Nova® recycled polyamide and ROICA™ EF premium sustainable recycled stretch fiber are the materials boosting th experience.
 
timeless, versatile utility, urban. In a history of deep blues, with clean and dense touches, we come to acceptance, to a future where we relearn to live with what we already had. Organic cotton, Tencel™ Modal Micro and Texloop™ guarantee timeless performed articles, where the high-performance pairs to sustainable process especially at yarn level.

Freedom for ourselves, comfort, flexibility, movement are the concepts the company explores looking not only to sportswear market, but to all the markets where the most comfortable yet performing and responsible materials - from recycled synthetics to organic cotton - are the “right value choice”.

The Bavarian viscose speciality fibres manufacturer Kelheim Fibres has partnered with the European Technology Platform for the Future of Textiles and Clothing (ETP) in two strategic programs: “Bio- Based Fibres” and “Circular Economy”.

Against the backdrop of the increasingly important sustainability debate, fundamental changes inside the textile supply chain are taking place. The two three-year ETP programmes “Bio-Based Fibres” and “Circular Economy” are a clear response to this. The goal is to bring key players from industry and science together to develop a long-term strategy to actively shape the sustainable realignment of the European textile industry.

“We have been manufacturing bio-based fibres for almost 85 years – these fibres are made from the renewable material wood and they are fully biodegradable at the end of their product lifecycle. As an alternative to crude-oil based materials, these fibres are becoming increasingly popular in various applications. Part of the reason for this is the fact that we can functionalize our speciality fibres during the production process and give them the exact properties that are required for different end uses. In terms of performance, they can keep up with synthetic materials”, explains Dr. Marina Crnoja-Cosic, head of New Business Development at Kelheim Fibres.

But Kelheim’s sustainability criteria also include the full life cycle of their products: When a textile, after its use, can become the raw material for new fibres and new products, for Crnoja-Cosic that is a huge advantage in terms of sustainability. “We want the best possible result – bio-based fibres AND circular economy are the way to get there.”

In a roundtable discussion during the recent Innovate Textiles & Apparel (ITA) textile machinery exhibition, imogo Founding Partner Per Stenflo and representatives from a number of like-minded European companies discussed the opportunities for new spray application technologies for the dyeing and finishing sector.

These technologies can achieve tremendous savings for manufacturers compared to traditional water-intensive processes it was explained at the event, held online from October 15-30th.

Pioneer
imogo – one of the latest companies to join TMAS, the Swedish Textile Machinery Association – is one of the key pioneers in this area with its Dye-Max system. Dye-Max spray dyeing technology can slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. This is due to the extremely low liquor ratio of 0.3-0.8 litres per kilo of fabric and at the same time, considerably fewer auxiliary chemicals are required to start with.

Obstacles
Such technologies, however, face a number of obstacles to adoption and during the ITA discussion it was agreed that 2020 has not provided the ideal climate for adventurous investors. “The textile industry is quite conservative and is definitely in survival mode at the moment and it is not the time to be a visionary,” said Stenflo. “Day to day business is about staying alive – that’s the reality for many of our customers.” Nevertheless, all of the panellists agreed that sustainable production will remain top of the agenda for the textile industry in the longer term and spray technologies for dyeing and finishing processes will be a part of it.

“Any investment in something new is a risk of course, and we have to be able to explain and convince manufacturers that there’s a good return on investment, not only in respect of sustainability, but in terms of making good business sense,” said Stenflo. “Here we could use the help of the brands of course, in putting pressure on their suppliers to be more sustainable. Governments also have a role to play, in providing incentives for producers to move in the sustainable direction. Sustainability alone will never cut it, there has to be a business case, or it won’t happen.”

Marketing
The marketing of sustainable new fibers is comparatively easy for the brands compared to explaining the difficult textile processes and the chemistries involved in fabric and garment production, he added.

“These fibers, however, currently go through all the same dirty processes that we need to get away from, so it must happen,” he said. “In developing our technologies, it has been important for us to avoid disrupting existing supply chains, stick with using off-the-shelf chemistries and dyes, and involve the dye manufacturers who are an essential part in how operations are driven today. “In fact, collaboration across the entire textile supply chain – from the brands right back to the new technology developers – is essential in moving the sustainability agenda forward.

Business models
“We are also looking into new business models in terms of how to reduce or lower the thresholds for investment and minimise the risk for the manufacturers who are looking to be the innovators,” he concluded. Also taking part in the ITA roundtable discussion were Simon Kew (Alchemie Technology, UK), Christian Schumacher (StepChange Innovations, Germany) Tobias Schurr (Weko, Germany), Rainer Tüxen (RotaSpray, Germany) and Felmke Zijilstra (DyeCoo, Netherlands).

European innovations
“It’s fantastic that all of this innovation is taking place in Europe based on established know-how and forward thinking,” said TMAS Secretary General Therese Premler-Andersson.

“Spray application technologies are a perfect illustration of how new digital technologies can lead to more sustainable production, in this case by replacing water-intensive processes with the highly precise and controlled application of dyes and chemistries as vapour.
“There was a major project by the Swedish research organisation Mistra Future Fashion recently, involving many brand and academic institute partners. The project’s Fiber Bible 1 and 2 reports conclude that it’s very difficult to make assumptions that one fiber is better than another, because it’s so much about how fabrics and garments are being produced from them. The study also found that 55% of the chemicals used in a garment comes from the dyeing. This is where a number of TMAS companies can make a difference.
“An organic or recycled cotton t-shirt is not automatically more sustainable than a conventional cotton t-shirt, or even one made from synthetics – the alternative fibers are a good start but you have to consider the entire life cycle of a garment, and that includes the smart technologies in textiles production.
“TMAS members – backed by Swedish brands and advanced research institutes – are playing an active part in pushing forward new concepts that will work, and I have no doubt that digitalisation now goes hand in hand with sustainability for the textile industry’s future.”          

The Lenzing Group scored a total of 30.5 points (4 points more compared to last year) and received for the first time a leading dark green shirt, the highest Hot Button ranking category. Lenzing once again convinced the non-profit organization Canopy with its innovative vision with regard to circular economy and REFIBRA™ technology, its high level of transparency in wood and pulp sourcing, as well as its active contribution towards protecting forests and preserving biodiversity.

In this widely recognized ranking, Canopy grades the world’s 31 largest producers of wood-based fibers with respect to their sustainable wood and pulp sourcing, their efforts with regard to using alternative non-wood feedstock and their achievements for lasting conservation in critical forests round the globe.

Leading in sustainable sourcing with a decade-long clean record
Wood and pulp are the most important raw materials for Lenzing’s sustainable production of cellulosic fibers. The Lenzing Group is particularly proud of its decade-long clean record of sustainable wood sourcing, evidenced by its long-standing credible commitment to wood certification, which Lenzing pioneered already in the 1990s. Lenzing’s commercial wood sources are  100 percent either certified by FSC® or PEFC™, or controlled in line with FSC® standards.

Social impact and afforestation project in Albania
At the backdrop of Lenzing’s long history of clean sourcing, the company is even more aware that the global forests are seriously threatened by illegal logging and deforestation but also by the consequences of climate change. This is why Lenzing – in addition to supporting a number of Canopy’s conservation projects – has set up a social impact and afforestation project in Albania (Southern Europe).*

Special focus on sustainable plantations in Brazil
For its latest investment in a pulp mill in Brazil, Lenzing actively collaborates with Canopy to ensure that the wood sourcing is in line with sustainable practices. The plant will be among the highest productive and energy-efficient facilities in the world and will feed the 40 percent excess bioelectricity generated on site as “green energy” into the public grid.*

REFIBRA™ technology: Commercially available since 2017
As a long-standing player in the industry, Lenzing has undertaken extensive research into many different alternative non-wood cellulose sources such as annual plants, like hemp, straw, and bamboo. Until now, textile waste has turned out to be the most promising alternative feedstock for scaled commercial use.
Lenzing’s lyocell fiber produced with the breakthrough REFIBRA™ technology (Eco Cycle technology for nonwoven applications) uses textile waste as part of the feedstock and is an important step towards a circular economy.*

50 percent recycled content by 2024
It is Lenzing’s vision to make textile waste recycling a common standard process like paper recycling and to offer fibers produced with REFIBRA™ technology with up to 50 percent recycled content from post-consumer waste by 2024.

*Please read attached document for more information

• The stunning niLuu collection by former professional volleyball player Nilufer Bracco features smart Bemberg™ fabrics by Ipeker
• Wonderful kimonos for women and men, sleep and face masks are the key pieces of the PETA certified and cruelty-free collection, 100% Bemberg™ and vegan

Former professional volleyball player Nilufer Bracco recently launched niLuu, a PETA approved cruelty-free loungewear brand using 100% Bemberg™ by Asahi Kasei that combines the iconic elegance of traditional silk with a socially and environmentally ethical production process.

Bemberg™ is a fiber made from the smart-tech transformation of cotton linters bio-utility materials that are converted through a traceable and transparent closed loop process; the Bemberg™ Ipeker Textile  fabric’s uniqueness comes from the exceptional quality characteristics achieved in design. The end result is a luxurious fabric so soft and smooth that it is almost like a second skin, breathes like cotton, drapes beautifully like silk, and reflects the cultural tradition of luxury textiles from founder Nilufer Bracco’s native country, Turkey. The first collection released by Miami based niLuu features premium quality kimono robes, sleep masks, face masks, and pillowcases that are available in a variety of deep and vibrant colors, and with a soft-brushed finish typical of premium sand-washed silk.

Designed to not only feel and look amazing but the entire niLuu collection is sustainable, biodegradable and 100% vegan.  Ipeker Textile, one of the major Bemberg™ fabric producers in Europe, proudly holds the title as the first vegan fabric producer in the world, receiving Vegan V-Label certificate on around 150 different products that adhere to the guidelines of the European Vegetarian Label, most of them developed with Bemberg™ yarn.

niLuu’s innovative Bemberg™ collection is hypoallergenic, antistatic, easy to care for, and it is also known to have several benefits for the skin. The breathability of the fabric helps to maintain body temperature; excellent moisture control means the fabric doesn’t dry out the skin or hair in the ways that cotton would and minimal friction against the skin means it is also known to have anti-aging benefits.  Speaking of niLuu’s high-quality Bemberg™ fabric, Founder, Nilufer Bracco adds, “Our innovative Bemberg™ vegan silk delivers the best of both worlds. Not only does our luxury fabric feel amazing when you use it, but you can also feel good knowing that it caused minimum harm to the planet when it was produced and that it will leave only the slightest trace when it reaches the end of its lifecycle.”

The luxury textiles brand has also shown its commitment to responsible practices, by partnering with 1% for the Planet pledging to donate 1% of their annual revenue to environmental organizations that work hard to protect our planet.

Anker, Devan and Shark Solutions teamed up to create the world’s first flame retardant aviation carpet using a recycled binder. Inspired by the knowledge and the needs of the aviation market, Anker motivated to achieve this new goal together. The PVB binder reuses laminated glass, from windshields and architectural/building glass, that otherwise would go to landfill.

German carpet manufacturer Anker is the first company to offer flame retardant carpets for aviation that are made with a recycled binder. In the search for a more sustainable binder, Anker discovered the PVB from Shark Solutions, a Danish cleantech company focused on giving a new life to post-consumer PVB. Properties of the aviation carpet with PVB as binder are the same as those of traditional non-sustainable carpets. The market has been looking for this type of solutions for a long time and market introduction has already started. Anker will introduce well known and special developed styles of aviation carpets with PVB and plan to take out traditional non-sustainable aviation carpets stepwise as soon as possible.

Shark’s PVB reuses laminated glass, from windshields and architectural/building glass, that otherwise would go to landfill. The non-toxic binder (no chlorine or phthalates) is fully recyclable and thus lives up to the future standards of the industry.

Textile innovator Devan Chemicals, known for its tailor-made flame retardant solutions, was called in to develop the flame retardant back coating, which is compliant with the Airbus and Boeing safety standards. “Based on many years of experience and competences in customer related developments, improving recycling rates is getting more and more important”, says Dirk Vanpachtenbeke, R&D manager Flame Retardants at Devan. “We are very proud that, together with Anker and Shark Solutions, we can contribute to this rising demand for products that meet the standards of a circular economy solution.”

In other news, Anker and Devan are already working on a new project, which includes Devan’s antimicrobial/viral-reducing technology. Recently, Devan published test results on the activity of their technology (BI-OME®) against SARS-CoV-2 and other viruses. According to independent testing, BI-OME is proven to achieve 99% and higher virus reduction, including of SARS-COV-2, on samples before washing and retains 98.5% even after 25 wash cycles. This technology has been recognized with the 2020 European Technology Innovation Leadership Award by Frost & Sullivan.

• Mimaki Europe auf der Innovate Textile & Apparel Virtual Trade Show

Amsterdam - Mimaki Europe präsentiert seine neuen Textildrucklösungen an einem virtuellen Stand auf der diesjährigen Innovate Textile & Apparel Virtual Trade Show (15. bis 30. Oktober 2020). An dem virtuellen Stand können Besucher, wie bei einer konventionellen Messe, Technik in Aktion sehen und mit den Mimaki-Vertretern über neue Markttrends und Lösungen zu neuen Anforderungen sprechen. Im Mittelpunkt des interaktiven Stands stehen zwei Drucker: der TS55-1800 – Sublimationsdrucker und Mimaki-Flaggschiff – und der neue Hybriddrucker TX300P-1800 MkII. Die Besucher profitieren außerdem von exklusiven Messeaktionen, darunter ein Sonderangebot für den TS300P-1800 und die Chance auf den Gewinn eines Sublimationsdruckers der Einstiegsklasse.

Der Sublimationsdruck ist eine bahnbrechende Technologie zum Bedrucken von Polyester, Textilien mit Polyesteranteil sowie Elastan. Er liefert hochwertige, strahlende Drucke und eignet sich für den On-demand-Betrieb. Der industrielle Produktionsdrucker TS55-1800 bietet diese Technologie, gepaart mit der von Mimaki bekannten Expertise und Innovationskraft. Zur Ausstattung gehören NCU (Nozzle Check Unit) zur Düsenprüfung und NRS (Nozzle Recovery System) zur Düsenwiederherstellung, Kerntechnologien von Mimaki, die verstopfte Düsen ohne Unterbrechung des Betriebs automatisch erkennen und ersetzen. Weiteres Technologiemerkmal: Ein MAPS (Mimaki Advanced Pass System) zur Vermeidung von Streifenbildung berechnet bei jedem Druckdurchgang mit einem speziellen Algorithmus den effektivsten Tropfenausstoß auf Basis von Farbe, Abdeckung und Geschwindigkeit.

Mit der optionalen „Mini Jumbo“-Rolle, die bis zu einem Viertel der Papierkosten sparen kann, und einem 10-Liter-Tintenbehälter bietet der Mimaki TS55-1800 die niedrigsten Betriebskosten unter seinesgleichen auf dem Markt und ist der ideale Produktionsdrucker für kleine und mittlere Unternehmen. Die Sonderaktion von Mimaki auf der Innovate Textile & Apparel Virtual Trade Show macht ihn noch attraktiver für Unternehmen, die in diesen schwierigen Zeiten ihr Angebot diversifizieren möchten.

Der Anfang des Jahres eingeführte Hybriddrucker Tx300P-1800 MkII kann Textilien und Papier bedrucken. Mit seiner beispiellosen Flexibilität erschließt er Druckdienstleistern völlig neue Möglichkeiten. Die Umstellung zwischen Textildirektdruck und Transferdruck erfolgt über eine schnell wechselbare Druckplatte. Der Drucker kann mit drei Tintenkombinationen konfiguriert werden: Textilpigment-/ Direktsublimationstinte, Textilpigment-/Sublimationstransfertinte oder Direktsublimations-/Sublimationstransfertinte. Damit bewältigt er von Mode über Heimtextilien bis hin zu Tapeten vielfältige Anwendungen. Von den Vorzügen des erschwinglichen und vielseitigen Druckers – kostengünstige Kleinauflagen, schnellere Bearbeitungszeiten und Eignung zur Produktion von Textilmustern –  können kleinere Dienstleister ebenso profitieren wie große Druckereien.

Organisator der Innovate Textile & Apparel Virtual Trade Show ist das World Textile Information Network (WTiN). Die virtuelle Messe soll Ausstellern und Besuchern eine vor den Verwerfungen der Pandemie geschützte Plattform bieten. Mimaki unterstützt diese Philosophie und freut sich auf den virtuellen Besuch von Kunden und Interessenten, die das Unternehmen mit den Messeaktionen – einschließlich der Chance auf Gewinn eines Mimaki TS30-1300-Sublimationsdruckers der Einstiegsklasse(1) – bei ihrer nächsten Investition unterstützen möchte.

„Auf der Innovate Textile & Apparel Virtual Trade Show können wir unsere Position auf dem Textilmarkt weiter stärken, mit unseren Kunden interagieren und uns mit der gesamten Branche austauschen“, erklärt Danna Drion, Senior Marketing Manager bei Mimaki Europe. „Unser Portfolio umfasst Technologien verschiedenen Typs und wir möchten die Vorteile jedes Druckers erläutern, damit Textildruckereien die richtige Technologie für ihr Geschäft finden. Trotz der schwierigen Zeiten sollen Kunden und Interessenten die Möglichkeiten unserer Lösungen möglichst detailliert kennenlernen. Wir möchten ihnen auch mit unseren Messeaktionen die Möglichkeit bieten, ihre nächste Investition mit Zuversicht zu tätigen, damit sie ihre Produktionslinie für einen weiterhin rentablen und wettbewerbsfähigen Betrieb maximieren können. Wir freuen uns, dass diese virtuelle Veranstaltung das ermöglicht.“

Auf der Innovate Textile & Apparel Virtual Trade Show stehen Experten von Mimaki rund um die Uhr für Einzelgespräche im Live-Chat zur Verfügung. Mimaki Europe, Mimaki USA und Mimaki Global arbeiten zusammen, sodass Besucher auf der ganzen Welt jederzeit Zugang zu regionalen Ansprechpartnern haben.

On Thursday, September 24, the Lenzing Group, a leading manufacturer of wood-based cellulose specialty fibers, and Hof University opened a new Nonwoven Development Center (VEZ). As a strategic partner, Lenzing has access to a state-of-the-art development line at the campus in Münchberg with immediate effect. This offers new opportunities for sustainable fiber and nonwoven innovations for a wide range of applications including hygiene, body care and medical.

In line with the sCore TEN corporate strategy, the Lenzing Group is focusing on sustainable innovations, which are agreed in an optimum manner to the needs of the value chain. „We offer our customers and partners a decisive competitive advantage: agility. The pilot plant in the VEZ allows the resource-efficient development of fiber and nonwoven innovations on a small scale”, Jürgen Eizinger, Vice President Business Unit Nonwovens at Lenzing, explains.

The VEZ was completed according to schedule in September 2020, after Lenzing and the University of Hof signed a cooperation agreement for its use in 2019. The timing is perfect. Developments at political level, such as the directive (EU) 2019/904 of the European Parliament and of the Council of 5 June 2019 on the reduction of the impact of certain plastic products on the environment, increase demand for responsibly manufactured nonwovens. The so-called Single-Use Plastics Directive aims at building awareness and greater transparency with regard to wet wipes and feminine hygiene products.

With its VEOCEL™ branded wood-based cellulose fibers, Lenzing has been laying the foundation for many years for sustainable nonwoven applications and will test and develop innovative ideas using the new possibilities offered by the VEZ. „We are noticing increasing interest in sustainable concepts from biodegradable cellulose fibers“, Jürgen Eizinger sums up the market development of the last months and adds: „We are aware that the fibers used have an enormous influence on the final product. For this reason our commitment goes beyond fiber production.“

With the spunlace pilot plant at the VEZ, Lenzing will support customers and partners more intensively in the development of new nonwoven applications and at the same time promote cooperation in the field of marketing. In the previous year, the company already established new certification standards for the VEOCEL™ brand. Since then certified manufacturers can only use the VEOCEL™ logo with blends of biodegradable cellulose fibers. With this measure, the VEOCEL™ brand allows consumers to make a more conscious product selection.

With its #ItsInOurHands environmental initiative, the VEOCEL™ brand also actively contributes to creating awareness. More detailed information can be obtained on itsinourhands.com.