From the Sector

Fashion for Good launches the Sorting for Circularity USA report unveiling significant findings from the project. A first of its kind in the US, the report delves into consumer disposal behaviour, textile waste composition, and the potential for fibre-to-fibre recycling within the country. It provides insights for making informed decisions for further investments, infrastructure development and the next steps towards circularity.

The U.S. Textile Waste Landscape
The United States is a global leader in textile consumption and waste generation, positioning itself as one of the largest sources of secondary raw materials for post-consumer textile feedstock. Despite this, only 15% of the textile waste generated in the US is currently recovered, with 85% ending up in landfills or incinerators.

With the impending policies in the European Union and certain American states, alongside commitments from both public and private sectors to promote fibre-to-fibre recycling, there is a growing demand for infrastructure related to post-consumer textile collection, sorting, and recycling.

Addressing Data GPS
In the pursuit of establishing a functional reverse supply chain and the necessary infrastructure, two critical areas lack data  – consumer disposal behaviour, and material characteristics of post-consumer textiles. The Sorting for Circularity USA project addressed these gaps through a comprehensive national consumer survey and waste composition analysis.

The survey revealed that 60% of respondents divert textiles, while 4% discard them, driven primarily by factors such as condition and fit. On the other hand, the waste composition analysis unveiled that over 56% of post-consumer textiles are suitable for fibre-to-fibre recycling, with cotton and polyester being the most prevalent fibre types, indicating a substantial potential for these textiles to be used as feedstock for mechanical and chemical recycling processes.

The project revealed a $1.5 billion opportunity for fibre-to-fibre recycling by redirecting non-rewearable textiles from landfills and incinerators to recycling streams. The report outlines growth strategies for the US textile recycling industry, emphasising enhanced financial value through efficiency improvements, increased commodity valuation, and policy mechanisms like extended producer responsibility schemes. Collaboration among stakeholders is crucial, including brands, government, retailers, consumers, collectors, sorters, recyclers, and financial institutions, to promote circularity, invest in research and development, and advocate for supportive policies and incentives to drive technological innovation. This redirection of textiles towards recycling underscores the substantial economic potential of embracing circularity in the textile industry.
 
There is an opportunity to build on these insights and assess the feasibility of different sorting business models and (semi) automated sorting technologies to create a demo facility suitable for closed-loop textile recycling. Ultimately, evaluating the commercial and technical feasibility of a semi-automated sorting process and identifying investment opportunities to scale solutions nationwide.

The new M line Allergen Spray, powered by patented HeiQ Synbio technology, eliminates allergens that are commonly found in our homes, and which affect a large percentage of people. These allergens include dust mite matters and allergens on pet hair which are found on our beds, sofas, carpets, curtains, and other household items. By applying the Allergen Spray, you can harness the powers of active probiotics, which break down common allergens, making bedroom and living spaces more comfortable and fresher.

Allergies are typically triggered by allergenic proteins. The active probiotics (beneficial bacteria) in the spray generate enzymes that break down proteins, removing these allergy triggers. A study by BMA Laboratories (Bochum, Germany), an accredited and independent laboratory, observed a 60% house dust mite allergens reduction, over 75% pet allergen reduction, and a close to 90% pollen allergen reduction, after the initial treatment.

The future of allergen reduction with the M line Allergen Spray, where innovation meets everyday convenience, is now available at Beter Bed stores in The Netherlands and the Belgian Flemish region. The continuous misting spray bottle ensures an even application, making it suitable to apply in home textiles such as mattress toppers, bed linen, pillow covers, comforters, carpets, rugs, and upholstered furniture, or any other items in reach of dust mites and pets. In the first week, the spray should be applied every day, and thereafter twice per week. The probiotics keep working for days, helping to maintain a balanced microbiome on treated surfaces

INDA, the Association of the Nonwoven Fabrics Industry, announced the three finalists for the World of Wipes Innovation Award®. The Award will be presented at the annual World of Wipes® (WOW) International Conference, June 17-20, at the Hyatt Regency Minneapolis in Minneapolis, Minnesota.

The three products vying for this Award are multi-purpose cleaning wipes from Kimberly-Clark Professional, a bio-binder technology from OrganoClick, and facial care wipes from Rockline Industries. The winner will be announced on Thursday morning, June 20th.

The three companies competing for the Award are:

• Scott® Xtreme Multi-Purpose Cleaning Wipes by Kimberly-Clark Professional:
  Scott® Xtreme Multi-Purpose Cleaning Wipes are great for tackling extreme cleaning tasks, like removing oil, grease, grime, paint, adhesives, caulk, and more, yet are gentle enough to clean hands.  Featuring a patented citrus cleaning solution, the dual-action cleaning fabric incorporates a textured side to increase scrubbing action for cleaning tough soils and a smooth side for wiping surfaces clean.  Scott® Xtreme Multi-Purpose Cleaning Wipes are truly a must-have for any DIY job and cleaning on-the-go.
• OC-Biobinder® Lily1450 by OrganoClick:
  OC-Biobinder® represents a series of bio-based and biodegradable binders intended for the nonwoven and paper industry. They are produced from renewable raw materials and residual streams from the food industry and replace traditional fossil-based plastic binders. OC-Biobinder® is available with many different properties adapted to the production of home compostable nonwoven materials such as premium napkins, table cloths and wet wipes.
• Facial Care Wipe with Glycine Amino Acid Complex by Rockline Industries:
  Rockline’s development of a facial wipe product containing a unique multifunctional complex of two glycines, a phospholipid compound and a blend of glycols allows for a multitude of skincare benefits as well as providing a self-preserving system for cellulosic nonwovens. Believed to be the first application of glycines in a wet wipe formulation, the product offers improved skin smoothness, elasticity, and hydration alongside an anti-aging claim.

INDA’s Technical Advisory Board selected the finalists based on the creativity, uniqueness, and technical sophistication employed in finding novel ways to expand the utilization of nonwovens. Categories considered for the award were wipes-related raw materials, roll goods, converting, packaging, active ingredients, binders, additives, and end-use products.

The 2023 World of Wipes Innovation Award winner was Indorama Ventures and Polymateria for their Nonwoven Wipe Using Biotransformation Technology. This innovative spunlace wipe utilized advanced biotransformation technology developed jointly by Indorama Ventures and Polymateria. Meeting the BSI PAS 9017 specification, this wipe in the event it becomes fugitive, and exposed to heat, sunlight, air and moisture will transform into a harmless, bioavailable wax at its end-of-life, eliminating microplastic pollution. Compatible with mechanical recycling and combatting 'fugitive' waste, this wipe represents a significant leap towards eco-friendly, sustainable nonwoven hygiene products.

British technology company Hypetex has been awarded a significant grant from Innovate UK to develop the world’s first technical coloured flax fibre, which will have applications in the sustainable manufacturing of cars, boats and other products that are usually made with carbon fibre.

Called FlaxTex the material is strong, lightweight and 100 per cent biodegradable, having a net positive carbon footprint at point of manufacturing. It can be colourised whilst enhancing its performance properties, with the process adding some important manufacturing attributes compared to standard flax fibre.

As such, FlaxTex’s mechanical properties represent the closest sustainable substitute for robust and lightweight materials like glass fibre and carbon fibre in composite structures.  

The performance of standard flax fibre is often hindered by its high moisture absorption, resulting in reduced structural integrity when used in composite construction. In addition, the natural brown colour of flax has been deemed unappealing for product use.

Flaxtex solves these issues by removing moisture through the colouring process and sealing the fibres, which waterproofs them and enabling their core mechanical properties. Hypetex’s patented nano-pigment technology changes the colour adding an aesthetic quality to the material.  

This colouring process is set to transform industrial design possibilities of Flax natural fibres by enhancing the strength and performance while simultaneously reducing post-processing requirements and total energy usage. This also aligns with Hypetex's commitment to supporting the green transition and helping manufacturers meet government expectations on the path to UK Net Zero targets and the European Green Deal.

Over the course of a 12-month industrial research project, Hypetex will further optimize its resin systems and processes, expanding the use of FlaxTex across various markets.  

FlaxTex has a range of industry uses, including on construction, automotive, sports equipment and furniture products.

The Italian Trade Agency (ITA) decided to participate in the ITM 2024 Exhibition this year with the Italian pavilion.

ITM 2024 International Textile Machinery Exhibition is preparing to host textile technology leaders in Istanbul on June 4-8, 2024. ITM 2024, which will be organized this year with the motto 'Discover the Future', will offer opportunities to discover the latest innovations in the sector, establish new business contacts and shape the textile world of the future together. The products to be exhibited at ITM 2024 Exhibition, which will bring together nearly 1300 domestic and foreign companies, will meet with thousands of buyers and visitors.

The Italian Trade Agency (ITA) is the governmental agency that supports the business development of Italian companies abroad and encourages the attraction of foreign investments to the country. ITA has decided to participate in the ITM 2024, which will be held at Tüyap Fair and Congress Center, as a pavilion. With this decision, ITA aims to further strengthen its presence in the sector and in Turkey.

INDA, the Association of the Nonwoven Fabrics Industry, and AFS, the American Filtration & Separations Society, announce their strategic partnership to create the FiltXPO™ 2025 Conference Program. FiltXPO, the International Filtration Conference & Exhibition, will co-locate with IDEA®25 from April 29 to May 1, 2025, in the Miami Beach Convention Center, Miami Beach, Florida.

The theme for FiltXPO 2025 is “The Future of Filtration: Advancing Technology, Performance & Sustainability.” The two-day FiltXPO conference program will feature technical insights into filtration innovations and technologies from industry professionals worldwide. INDA and AFS will issue a call for abstracts in the next few weeks.

Pincroft, a textile dyeing, printing and finishing company, bolstered its efforts to achieve efficient and sustainable textile operations by adopting Baldwin Technology’s innovative TexCoat™ G4 system.
 
The U.K-based company offers a range of technical finishes, including flame-retardant treatments, anti-mosquito solutions and durable water repellents. As a provider of finishing solutions for workwear and military fabrics, Pincroft holds itself to high quality expectations and compliance standards, ensuring that its products deliver superior performance in challenging environments.

Since installing Baldwin’s TexCoat G4 system in September 2022, Pincroft has reduced finishing chemistry usage by 20%, with no waste or color changeovers and no need for periodic pad renewals. It has also reduced water consumption by 50% as a result of increased chemistry concentration enabled by precision spray technology. Additionally, with TexCoat G4, productivity has increased by 50%, due to lower wet pick up, allowing for a significantly higher line speed.
 
By reducing time needed in the stenter, the TexCoat G4 system uses just 10% of the energy required by the traditional pad finishing process.

Global Fashion Summit: Copenhagen Edition 2024 will take place on 22-23 May in the Copenhagen Concert Hall. Presented by Global Fashion Agenda (GFA), a non-profit organisation that is accelerating the transition to a net positive fashion industry, the 2024 edition with mark the Summit’s 15th anniversary and will bring together  leaders to drive urgent social and environmental progress.
 
Her Majesty The Queen of Denmark will attend the Summit on 22 May and provide Opening Remarks. The Queen first attended the inaugural Summit in 2009 and has since spoken at every edition of the Summit, demonstrating her dedication to a more sustainable future.
 
Under the central theme ‘Unlocking the Next Level’, over 100 other esteemed speakers will take to the Summit’s historic stages to share action-based insights, including executives from: Kering, Patagonia, Maersk, Brioni, Conservation International, The New York Times, Ralph Lauren Corporation, H&M Group, Ganni, WWF, Re&Up, Fair Labor Association, and more.
 
With a 15-year foundation as a leading forum for sustainability in fashion, the event will attract over 1000 stakeholders from the fashion sector, adjacent industries, policymakers, solution providers, and more. The Summit’s programme will be structured around unlocking solutions to fashion’s biggest sustainability barriers, no matter where an organisation is on its sustainability journey. Sessions include: ‘Fragmented Futures: Fashion’s Policy Agenda’, ‘Luxury, Leather, and Land’, ‘Towards a Binding Agreement on Wages, ‘Pathways to Indigenous Partnership’, and ‘Ending Oversupply’.
 
Building on the impact of previous Summits, the 2024 edition will also host more action-oriented roundtable meetings. The closed-door sessions bring together groups of stakeholders to discuss relevant barriers, share learnings, and build collaborations to support the implementation of solutions. Roundtables will address topics such as: ‘Scaling Circular Textile Systems’, ‘Pay Equity Interventions in European Value Chains’, and ‘Impactful Influence’.
 
The Summit will also present the Innovation Forum, a curated exhibition of leading sustainable solutions. Summit attendees can meet with exhibitors covering the entire value chain – from innovative materials to end-of-use solutions.

By establishing touchpoint textile, drupa has created a special forum to showcase pioneering applications in digital textile printing. The highlight will be the Digital Textile Micro Factory – a fully connected, integrated process chain starting with the customer enquiry and design through to large-format digital textile printing.

touchpoint textile represents drupa’s growing expansion into new markets comprising such segments as packaging production, large-format or industrial and functional printing next to packaging production. All of these segments are undergoing the same transformation processes and offer enormous growth potential. The special forum revolves around the opportunities and challenges of digital textile printing, brings together renowned exhibitors, industry partners and brand owners and provides scope for cross-industry cooperation, new projects as well as product and manufacturing ideas. The operational content partners of touchpoint textile include the German Institutes for Textile and Fibre Research Denkendorf (DITF), as Europe’s largest textile research centre, as well as ESMA, the European Specialist Printing Manufacturers Association.

Digital Textile Micro Factory: on-demand and virtual products – on the path towards sustainable production
In cooperation with 12 partners from industry and research the DITF will demonstrate a Digital Textile Micro Factory live at drupa and, hence, a fully connected, integrated process chain from design to finished product. This will present new possibilities for digitalisation and direct customer involvement, for instance in the form of 3D apparel simulations complete with links to design networks for creative input. Digital workflows and virtual products are integrated directly in the manufacturing process. As a special highlight for all trade visitors the technology partners of this Micro Factory will demonstrate an automated on-demand production, textile printing, cutting and sorting – without any manual interaction. Such decentralised and digitally connected design and production chains will enable the textile industry to respond to customers’ requests and trends in a more targeted manner in future. This means, touchpoint textile 2024 technologically points the way to a future without shelf-warmers. In addition, the carbon footprint for the complete process from virtual development to finished product will be modelled and presented at the trade fair.  

2024 will see the design competition “drupa – textile design talents” being held for the first time. This was conceived of by the DITF and will be implemented by the partner Mitwill. This provides up-coming textile designers and newcomers with a unique opportunity to introduce their ideas and visions to a professional audience.

Broad industry support
A project as comprehensive as the Micro Factory requires many strong partners. The companies “on board” here include: Assyst/Germany (3D simulation for digital apparel twins), Mitwill Textiles Europe/France (creative design network), D.G.I. Digital Graphics Incorporation/South Korea, Multi-Plot Europe/Germany (large-format textile printing), LEONHARD KURZ Stiftung/Germany, Zünd/Switzerland (digital cutting), robotfactory/Denmark, Asco/The Netherlands (presenting an innovative buffer solution between digital printing and cutting, automated sorting of cut parts from the cutter by robotfactory) as well as Brother/Japan (for small-format textile printing and bonding technology). Vaude and berger textiles will be sponsoring the touchpoint. Another key partner is the Albstadt-Sigmaringen University that is supporting the project as a conceptual sponsor and which has set itself the clear mission to incorporate these new topics into its curriculum. This means the staff of the future will be geared up to the new challenges ahead.

Another partner of touchpoint textile is the European Specialist Printing Manufacturers Association (ESMA), which is responsible for the lecture programme. ESMA represents industrial, functional and specialist printing and acts as an organiser of educational events in the field of textile printing. At drupa speakers from research, development, and industry will address issues related to printing and finishing techniques, workflows, market developments and sustainability, to name but a few. The focus will also be on trends and applications that unlock ever new potential through the interplay of digital printing and textile printing substrates. The lectures are divided into the categories Research, Finishing, Print Systems & Hardware, Substrates, Inks & Chemistry and Software & Electronics. Assyst, for example, will deliver talks on the virtual development of apparel as well as the research project ECOShoring, which is funded by the “Deutsche Bundesstiftung Umwelt” – DBU (German Federal Environmental Foundation) and focuses on personalised and on-demand sustainable manufacturing. Other speakers represent Adobe, Balta Group, Barbieri Electronic, Brother, Centexbel, CST, DITF, Fujifilm Speciality Ink Systems, HS Albsig, Kornit Digital, Meteor Inkjet, Mimaki, Mitwill, Multiplot, Print-Rite, RWTH Aachen, Seiko Instruments, Tiger Coatings, Xaar, Zünd and the list is updated on regular basis.

drupa will be held at the Düsseldorf Exhibition Centre from 28 May to 7 June 2024.

• GOTS Version 7.0 released
• GOTS certified entities grow by 8% and expand to 89 countries
• GOTS releases Due Diligence Handbook for certified entities
• Farm-Gin Registry implemented in India, creating a direct link and better evaluation of incoming data
• GOTS collaborates with European Space Agency and Marple for AI organic cotton project
• #Behindtheseams campaign reaches 21 million+ unique individuals

The Global Organic Textile Standard (GOTS), managed by non-profit Global Standard, recognises 2023 as a year of significant milestones. From expansion of GOTS-certified facilities to the release of a new standard version, GOTS remained a beacon for businesses navigating changing legislation, social and environmental demands.

Coming out of one of the strongest years for GOTS, 2023 culminated with 25 GOTS-approved certification bodies reporting a noteworthy 14,676 certified facilities (an 8% growth from 2022) in 89 countries.

Ushering in GOTS Version 7.0
As of 1 March, facilities that become GOTS-certified will operate under the new GOTS Version 7.0, released in March 2023 with a one-year transition period. GOTS Version 7.0 and its accompanying Implementation Manual provides a comprehensive solution for companies who want to produce organic textiles and be supported to ensure compliance with environmental and human rights due diligence along the entire value chain, from field to finished product.

GOTS Version 7.0 also introduced a six-step due diligence process and handbook that equips GOTS-certified operations to proactively identify, assess and mitigate adverse impacts throughout their value chains.

Looking to the future
GOTS initiated in 2023 two major projects in India, the globe’s largest producer of organic cotton. The Farm-Gin Registry was introduced for the 2022-2023 harvest season, which acts as a link between farm and gin and is a tool to strengthen integrity by collecting organic raw seed cotton data producing farm or farm group.

GOTS, the European Space Agency (ESA) and software company Marple launched a new project that aims to show the potential for remote satellite monitoring of organic cotton cultivation systems. The project trained artificial intelligence (AI) to use ESA satellite data to detect cotton fields across India and automatically classify them according to their cultivation standard. By integrating standardised yield metrics, this innovative approach will enable GOTS to generate realistic estimates of organic cotton yields in specific areas. In addition, the project is expected to empower GOTS to recognise cotton fields that have not yet obtained organic certification but possess the potential for a transition to organic cultivation. The first results of the project will be announced in June.

Educating the consumer
GOTS, in its ongoing commitment to stakeholder education, orchestrated in November an immersive 360-degree awareness and educational campaign. Successfully engaging both consumers and industry professionals, the initiative shined a spotlight on GOTS-certified companies and their products, which empowered consumers to make more conscientious choices while shopping. With an impressive turnout of over 250 certified entities, the campaign made a significant global impact, reaching more than 21 million unique individuals worldwide.