From the Sector

Reset
358 results
Photo: Texhibition Istanbul
20.01.2023

Third edition of TEXHIBITION Istanbul Fabric, Yarn and Textile Accessories Fair

  • Third edition of Texhibition Istanbul will take place from 8-10 March 2023 at the Istanbul Expo Center
  • Organizers focus on growth: more than 25,000 international visitors are targeted for March 2023
  • More than 400 exhibitors show fabrics, yarns and accessories at the Istanbul Expo Center
  • Trend seminars and trend area with special focus on sustainability presents the trends for spring/summer 2024

The third edition of Texhibition Istanbul Fabric, Yarn and Textile Accessories Fair, 8-10 March 2023 builds on the successful editions of the fair last year. The fair is organized by the Istanbul Textile Exporters' Association (ITHIB) and with the support of the Istanbul Chamber of Commerce (ICOC).

More than 400 exhibitors from the areas of knitwear, woven fabrics, denim, yarns and accessories will present their 2024 spring-summer collections on 15,000 square meters in the Istanbul Expo Center. These include well-known names such as Kipaş, Bossa, Yünsa, Btd, Çalık, Hefa, İskur, Universal, Gülle, and Migiboy.

  • Third edition of Texhibition Istanbul will take place from 8-10 March 2023 at the Istanbul Expo Center
  • Organizers focus on growth: more than 25,000 international visitors are targeted for March 2023
  • More than 400 exhibitors show fabrics, yarns and accessories at the Istanbul Expo Center
  • Trend seminars and trend area with special focus on sustainability presents the trends for spring/summer 2024

The third edition of Texhibition Istanbul Fabric, Yarn and Textile Accessories Fair, 8-10 March 2023 builds on the successful editions of the fair last year. The fair is organized by the Istanbul Textile Exporters' Association (ITHIB) and with the support of the Istanbul Chamber of Commerce (ICOC).

More than 400 exhibitors from the areas of knitwear, woven fabrics, denim, yarns and accessories will present their 2024 spring-summer collections on 15,000 square meters in the Istanbul Expo Center. These include well-known names such as Kipaş, Bossa, Yünsa, Btd, Çalık, Hefa, İskur, Universal, Gülle, and Migiboy.

At the last event in September 2022, a total of 20,606 visitors took the opportunity to start business discussions and place orders. Among them international visitors from 97 countries, including the EU, UK, USA, North Africa and the Middle East. Over 25,000 visitors are expected at the upcoming Texhibition in March 2023 such as large clothing manufacturers, purchasing managers of international chain stores and department stores, managers of international brands and chains with their own brand collections, managers of online sales platforms, importers, wholesalers, distributors, designers, etc.

The trend area at Texhibition will show the spring-summer 2024 trends with a focus on sustainable aspects.

Texhibition Istanbul completes the IFCO, Istanbul Fashion Connection, which takes place from 8.-11. February 2023, also for the third time at the Istanbul Expo Center.

Source:

Texhibition Istanbul / JANDALI

13.01.2023

MS Printing Solutions and JK Group announce Christopher Bernat as General Manager

MS Printing Solutions and JK Group announce the appointment of Christopher Bernat as General Manager of North America and the Caribbean markets. He will be the main point of contact for overall business in the region. Chris joins MS Printing Solutions and JK Group with over 20 years of industry experience.

He was Director of Sales at Sawgrass Technologies prior to starting Vapor Apparel in 2004. He currently serves on the Executive Committee and Board of Directors of Printing United and resides in Charleston, South Carolina.

MS Printing Solutions and JK Group announce the appointment of Christopher Bernat as General Manager of North America and the Caribbean markets. He will be the main point of contact for overall business in the region. Chris joins MS Printing Solutions and JK Group with over 20 years of industry experience.

He was Director of Sales at Sawgrass Technologies prior to starting Vapor Apparel in 2004. He currently serves on the Executive Committee and Board of Directors of Printing United and resides in Charleston, South Carolina.

Source:

JK Group SpA

30.12.2022

Trio of textile fairs rescheduled to end of March

In view of the easing of pandemic restriction policies in China, the Spring Editions of Intertextile Shanghai Apparel Fabrics, Yarn Expo and Intertextile Shanghai Home Textiles have been moved to the new timeslot of 28 – 30 March 2023. This will allow both local and international fairgoers more time to prepare for their participation, with a higher industry turnout now expected at the three fairs. The fairs will still be located at the National Exhibition and Convention Center in Shanghai where they were originally due to be held from 8 – 10 March.

Discussing the change of dates, Ms Wilmet Shea, Deputy General Manager of Messe Frankfurt (HK) Ltd explained: “After talking to our stakeholders, we believe adjusting the spring show dates to the end of March is the right move. It provides enough time for exhibitors and visitors from local and abroad to plan for the fairs and capitalise on the ample international business opportunities brought by the reopening of China’s border.”

In view of the easing of pandemic restriction policies in China, the Spring Editions of Intertextile Shanghai Apparel Fabrics, Yarn Expo and Intertextile Shanghai Home Textiles have been moved to the new timeslot of 28 – 30 March 2023. This will allow both local and international fairgoers more time to prepare for their participation, with a higher industry turnout now expected at the three fairs. The fairs will still be located at the National Exhibition and Convention Center in Shanghai where they were originally due to be held from 8 – 10 March.

Discussing the change of dates, Ms Wilmet Shea, Deputy General Manager of Messe Frankfurt (HK) Ltd explained: “After talking to our stakeholders, we believe adjusting the spring show dates to the end of March is the right move. It provides enough time for exhibitors and visitors from local and abroad to plan for the fairs and capitalise on the ample international business opportunities brought by the reopening of China’s border.”

(c) FET
Business Secretary Grant Shapps discusses FET’s wet spinning system with Mark Smith, FET R&D Manager
16.12.2022

FET extrusion system features in UK Business Secretary’s visit

The UK’s new Business Secretary, Grant Shapps has visited the Henry Royce Institute’ hub in Manchester to seal the second phase of R&D investment in the institute of £95 million. Fibre Extrusion Technology Limited (FET) of Leeds, England had previously installed its FET-200LAB wet spinning system at the University of Manchester site and this proved to be a focus for the Business Secretary’s interest, as he discussed the project with FET’s Research and Development Manager, Mark Smith.

This wet spinning technology enables fibres to be derived from sustainable wood pulp to produce high quality apparel and trials are now underway to perfect this process. FET is a world leading supplier of laboratory and pilot melt spinning systems, having successfully processed more than 35 different polymer types in multifilament, monofilament and nonwoven formats.

During his visit, Shapps spoke of the investment programme as a means of reinforcing the UK’s standing as a leader in advanced materials research, development and innovation.

The UK’s new Business Secretary, Grant Shapps has visited the Henry Royce Institute’ hub in Manchester to seal the second phase of R&D investment in the institute of £95 million. Fibre Extrusion Technology Limited (FET) of Leeds, England had previously installed its FET-200LAB wet spinning system at the University of Manchester site and this proved to be a focus for the Business Secretary’s interest, as he discussed the project with FET’s Research and Development Manager, Mark Smith.

This wet spinning technology enables fibres to be derived from sustainable wood pulp to produce high quality apparel and trials are now underway to perfect this process. FET is a world leading supplier of laboratory and pilot melt spinning systems, having successfully processed more than 35 different polymer types in multifilament, monofilament and nonwoven formats.

During his visit, Shapps spoke of the investment programme as a means of reinforcing the UK’s standing as a leader in advanced materials research, development and innovation.

“R&D investment is a critical way to turbocharge Britain’s growth. Growing an economy fit for the future means harnessing the full potential of advanced materials, making science fiction a reality by supporting projects from regenerative medicine to robots developing new recycling capabilities, right across the country. Today’s £95 million investment will do just that, bringing together the brightest minds across our businesses and institutions to help future-proof sectors from healthcare to nuclear energy.”

The Henry Royce Institute was established in 2015 with an initial £235 million government investment through the Engineering and Physical Sciences Research Council and the latest £95 million sum represents the second phase of the investment.

Opportunities being investigated by Royce include lightweight materials and structures, biomaterials and materials designed for reuse, recycling and remanufacture. Advanced materials are critical to the UK future in various industries, such as health, transport, energy, electronics and utilities.

Photo: Montex
15.12.2022

Monforts: 40 years of advanced manufacturing in Austria

Montex Maschinenfabrik – the key site for the manufacturing of Monforts finishing machines in Austria – has celebrated its 40th anniversary in 2022.

Located in St. Stefan, in the centre of Austria’s Lavant Valley in Carinthia, the advanced manufacturing hub was founded by Monforts in 1982.

“From the outset, we have specialised in all aspects of machine production, including high-precision sheet metal working, laser cutting and welding, and the pre-assembly of machines and components, , along with a well-organised quality management and spare parts service,” says Montex plant manager Gert Hanzl.

“We work very closely with the Monforts research and development team in Mönchengladbach, Germany, to take the latest new ideas through testing and prototyping, in readiness for future series production,” Hanzl says. “We are fully exploiting the many new possibilities in the continuous development of design and manufacturing methods. The respective electrical switch cabinets for the machines are delivered just-in-time from Monforts in Germany according to our production schedules.”

Montex Maschinenfabrik – the key site for the manufacturing of Monforts finishing machines in Austria – has celebrated its 40th anniversary in 2022.

Located in St. Stefan, in the centre of Austria’s Lavant Valley in Carinthia, the advanced manufacturing hub was founded by Monforts in 1982.

“From the outset, we have specialised in all aspects of machine production, including high-precision sheet metal working, laser cutting and welding, and the pre-assembly of machines and components, , along with a well-organised quality management and spare parts service,” says Montex plant manager Gert Hanzl.

“We work very closely with the Monforts research and development team in Mönchengladbach, Germany, to take the latest new ideas through testing and prototyping, in readiness for future series production,” Hanzl says. “We are fully exploiting the many new possibilities in the continuous development of design and manufacturing methods. The respective electrical switch cabinets for the machines are delivered just-in-time from Monforts in Germany according to our production schedules.”

While there is standardisation in series-produced Monforts machines, Montex is also increasingly called upon to construct bespoke machines with unique designs, according to the special needs of customers in technical textile or special textiles, he adds.

The core Monforts machine range, including the industry standard Montex stenters, along with relaxation dryers, Thermex dyeing ranges, Monfortex compressive shrinking ranges and Montex®Coat coating units is built at the Austrian site.

Source:

AWOL Media for Montex

Photo: Baldwin Technology Company Inc.
Adina Starke
13.12.2022

Adina Starke joins Baldwin Technology as West Coast Regional Sales Manager

Baldwin Technology Co. Inc. has appointed Adina Starke, a seasoned print and packaging professional with wide-ranging expertise, as Regional Sales Leader for the West Coast.

At Baldwin Technology Company Inc., a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries, Starke will be responsible for all product sales to print and packaging professionals in Washington, Idaho, Oregon, California, Nevada, Arizona, Utah, Alaska and western Canada.

Starke has spent the past 15 years in various technical and sales roles in the print and packaging industry. Most recently, she spent four years with All Printing Resources (formerly JVI Solutions), as a Territory Manager and a Technical Sales and Business Development Representative. Prior to that, she spent several years with Lohmann Specialty Coating and Sun Chemical.

Starke graduated from Clemson University with a Bachelor of Science degree in Graphic Communications.

Baldwin Technology Co. Inc. has appointed Adina Starke, a seasoned print and packaging professional with wide-ranging expertise, as Regional Sales Leader for the West Coast.

At Baldwin Technology Company Inc., a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries, Starke will be responsible for all product sales to print and packaging professionals in Washington, Idaho, Oregon, California, Nevada, Arizona, Utah, Alaska and western Canada.

Starke has spent the past 15 years in various technical and sales roles in the print and packaging industry. Most recently, she spent four years with All Printing Resources (formerly JVI Solutions), as a Territory Manager and a Technical Sales and Business Development Representative. Prior to that, she spent several years with Lohmann Specialty Coating and Sun Chemical.

Starke graduated from Clemson University with a Bachelor of Science degree in Graphic Communications.

Source:

Baldwin Technology Company Inc.

(c) The Montalvo Corporation
29.11.2022

Montalvo promotes Vince Mullen to Manager of North American Sales

The Montalvo Corporation, an international company in web tension control products and services based in Gorham Maine, has promoted Inside Sales Support Manager Vince Mullen to Manager of North American Sales.

Russ Hall, Montalvo CEO said, “Vince has more than proven himself in his years of working with Team Montalvo on the Inside Sales Support Team. And most recently he has done an impressive job leading that department. He will continue leading that department in addition to taking on a more direct role of working with all of our Field Sales Representatives across North America.”

The Montalvo Corporation, an international company in web tension control products and services based in Gorham Maine, has promoted Inside Sales Support Manager Vince Mullen to Manager of North American Sales.

Russ Hall, Montalvo CEO said, “Vince has more than proven himself in his years of working with Team Montalvo on the Inside Sales Support Team. And most recently he has done an impressive job leading that department. He will continue leading that department in addition to taking on a more direct role of working with all of our Field Sales Representatives across North America.”

About the new position Mullen said, “having joined Montalvo since moving to Maine from the UK I have enjoyed working with and learning from the very best in web tension control. It’s a great honor to have been given this promotion and I am excited for the future of our company as new developments enter our product portfolio, along with working with our more traditional lines. Our teams at Montalvo are fully committed to embracing the day to day and long term needs of our customer base and I am especially looking forward to working closely with our nationwide network of representatives.

More information:
Montalvo web tension control USA
Source:

The Montalvo Corporation

Photo munichfabricstart
21.11.2022

300 Pre-Collections at VIEW Premium Selection

First insights, first new materials and trend highlights: On 29 and 30 November 2022, the European premium fabric sector will meet for an important exchange with international producers at VIEW in Munich to find out about the first colour and material trends for spring/summer 2024 at the earliest possible time. A selected range of around 300 pre-collections will be on show at the MVG Museum. This means that VIEW will once again be strong and business-relevant this season.

First insights, first new materials and trend highlights: On 29 and 30 November 2022, the European premium fabric sector will meet for an important exchange with international producers at VIEW in Munich to find out about the first colour and material trends for spring/summer 2024 at the earliest possible time. A selected range of around 300 pre-collections will be on show at the MVG Museum. This means that VIEW will once again be strong and business-relevant this season.

The past VIEW Premium Selection in June 2022 was a great success. Completely booked out and more international than ever, the Preview Textile Show of Munich Fabric Start Exhibitions GmbH was an important contact point for the buying and design teams of companies such as Akris, Baldessarini, Bogner, Calvin Klein, Cinque, Comma, Drykorn, Escada, Hugo Boss, Lala Berlin, Lagerfeld, Laurél, MAC, Marc Cain, Marc O'Polo, Riani, Schumacher or Strellson. The trend towards an increasingly international range continues in November. Numerous buyers, designers and product managers from European ready-to-wear manufacturers are expected in Munich the week after next, looking for new material innovations and trends at VIEW and the parallel ISPO.

International exhibitor portfolio with many new names
Material influences from Europe to Asia bring a highly exciting mix for the trend research of the new collections. Exhibitors from Bulgaria, China, Denmark, Germany, France, Great Britain, Greece, Hong Kong, Italy, Japan, Korea, Spain and Turkey are among the participants.

The newcomers and returnees include, in addition to others:
AGNSTR / ALA CAMPOLMI / BAIRD MC NUTT / BELL & THUNDER / CB STILE / COLORA / EKOTEN / FABRIC LAB / GUARISCO / JECA LIMITED / KING BUTTON / LANIFICIO CAVERNI / LIMONATA EAST / M.T.T. MANIFATTURA / MANTERO / MILIOR / MTP PIEROZZI / PADROCASAS / PIZVAL / RIBBONTEX / SITIP / TEKSTINA SINCE 1828 / TEXMODA / VIVOLO und WAY.

More information:
VIEW Premium Selection F/S 2024
Source:

munichfabricstart

Photo: ISKO
21.11.2022

ISKO at Climate Change Conference (COP 27)

Confirming its commitment as a global sustainability player.

The Sharm el-Sheikh Climate Change Conference (COP 27) has turned out to be one of the most closely watched events in recent years, an opportunity to bring together leaders from around the world in the face of a pressing and undeniable need

ISKO had the honor to be the only manufacturer representative of the fashion industry at the United Nations event by taking part on 12 November at the focus talk “Circular Systems for a Net Positive Fashion Industry” organized by the Global Fashion Agenda (GFA) and the UNEP (United Nations Environment Programme).

Elena Faleschini, Senior Manager Brand Partnerships ISKO, and the other speakers (Federica Marchionni, Lily Cole, Miranda Schnitger, Samata Pattinson, Holly Syrett and Tarek Alkhoury) have agreed that:

  • Harmonization and transparency in goals are critical.
  • Vertical and horizontal partnerships are key.
  • Investment in innovation is vital to a circular business model in fashion.
  • Fashion must be part of the discussions around climate change and net positive.

Confirming its commitment as a global sustainability player.

The Sharm el-Sheikh Climate Change Conference (COP 27) has turned out to be one of the most closely watched events in recent years, an opportunity to bring together leaders from around the world in the face of a pressing and undeniable need

ISKO had the honor to be the only manufacturer representative of the fashion industry at the United Nations event by taking part on 12 November at the focus talk “Circular Systems for a Net Positive Fashion Industry” organized by the Global Fashion Agenda (GFA) and the UNEP (United Nations Environment Programme).

Elena Faleschini, Senior Manager Brand Partnerships ISKO, and the other speakers (Federica Marchionni, Lily Cole, Miranda Schnitger, Samata Pattinson, Holly Syrett and Tarek Alkhoury) have agreed that:

  • Harmonization and transparency in goals are critical.
  • Vertical and horizontal partnerships are key.
  • Investment in innovation is vital to a circular business model in fashion.
  • Fashion must be part of the discussions around climate change and net positive.
More information:
Isko COP 27
Source:

ISKO

(c) Messe Frankfurt (HK) Ltd.
15.11.2022

Cinte Techtextil China postponed to 2023

Owing to evolving pandemic circumstances in Shanghai, the organisers have announced that Cinte Techtextil China will no longer be taking place from 7 – 9 December 2022 at the National Exhibition and Convention Center (Shanghai). A new fair date in 2023 will be announced in due course.
 
Ms Wilmet Shea, Deputy General Manager of Messe Frankfurt (HK) Ltd, explained: “While it is unfortunate that Cinte Techtextil China cannot take place as scheduled, after holding talks with stakeholders we decided that deferring the fair was necessary to comply with the government’s pandemic control measures. I would like to thank all participants for their patience and continued support, and to reiterate our resolve to provide a safe platform for the technical textile and nonwovens industry to congregate next year.”

Owing to evolving pandemic circumstances in Shanghai, the organisers have announced that Cinte Techtextil China will no longer be taking place from 7 – 9 December 2022 at the National Exhibition and Convention Center (Shanghai). A new fair date in 2023 will be announced in due course.
 
Ms Wilmet Shea, Deputy General Manager of Messe Frankfurt (HK) Ltd, explained: “While it is unfortunate that Cinte Techtextil China cannot take place as scheduled, after holding talks with stakeholders we decided that deferring the fair was necessary to comply with the government’s pandemic control measures. I would like to thank all participants for their patience and continued support, and to reiterate our resolve to provide a safe platform for the technical textile and nonwovens industry to congregate next year.”

Source:

Messe Frankfurt (HK) Ltd

(c) JIAM, Messe Frankfurt Japan Ltd
07.11.2022

JIAM 2022 OSAKA taking place after a six year break

JIAM 2022 OSAKA, organised by the Japan Sewing Machinery Manufacturers Association (JASMA), will soon be held at INTEX OSAKA from 30 November – 3 December 2022. Under the theme of “It all connects at JIAM – the forefront of technology and master craftsmanship”, the 12th edition brings together leading sewing machine suppliers and apparel manufacturers, making it a must-attend event for textile professionals. In this era of change, an international platform to facilitate business and information exchange is essential. The 2022 edition will showcase apparel manufacturing solutions catered to each and every need, combining high-level skillsets and time-tested knowledge with the latest modern-day technology.

JIAM 2022 OSAKA, organised by the Japan Sewing Machinery Manufacturers Association (JASMA), will soon be held at INTEX OSAKA from 30 November – 3 December 2022. Under the theme of “It all connects at JIAM – the forefront of technology and master craftsmanship”, the 12th edition brings together leading sewing machine suppliers and apparel manufacturers, making it a must-attend event for textile professionals. In this era of change, an international platform to facilitate business and information exchange is essential. The 2022 edition will showcase apparel manufacturing solutions catered to each and every need, combining high-level skillsets and time-tested knowledge with the latest modern-day technology.

As of October, 144 exhibitors from 10 countries and regions (China, Greece, Germany, Hong Kong, India, Italy, Singapore, Taiwan and Thailand) have signed up for JIAM 2022 OSAKA to showcase their latest products and services. Of these, 39 companies (21 domestic, 18 overseas) will be joining the fair for the first time. In addition, two pavilions from Germany (VDMA; Mechanical Engineering Industry Association) and Taiwan (TSMA; Taiwan Sewing Machinery Association) will bring even more product diversity to the show floor. The previous edition of JIAM OSAKA in 2016 welcomed 258 exhibitors from 15 countries and regions as well as 15,257 visitors from 72 countries and regions, mainly from Bangladesh, China, India, Korea, Taiwan, Sri Lanka, and Vietnam.

A wide variety of special seminars
11 special organiser seminars will not only provide relevant industry knowledge, but also offer practical skills for daily work:

  • Manufacturing industry and digital technology
    Mr Atsushi Yasuda, Manager of Ministry of Economy, Trade and Industry Manufacturing Industries Bureau,Industrial Machinery Division
  • Skills training seminar
    1. Twist Jacket (Lapel) pattern and matching sewing (front and shoulder seams)
    2. Shoulder keeper (prevent shoulder collapse) cherish a piece of clothing
    Mr Susumu Inarida, Emeritus Professor of Bunka Fashion Graduate University (BFGU) / Specially Appointed Committee Member of Japan Modelist Associate / Contemporary Master Craftsman Certified by the Ministry of Health, Labor and Welfare
  • "Mottainai!" sustainable initiatives from Osaka!
    Common points between Senshu Towl and OSAKA KABAN and the future
    Mr Eiji Shinoda, President of Shinoda cCorp
    Mr Kenji Fukuroya, Representative Employee of Fukuroya Joint Company etc.
  • About the sustainable fashion community “NewMake”- Upcycling initiatives in collaboration with brands
    Mr Tac Hosokawa, CEO of Story & Co.
  • Win - win strategy on underwear sewing, viewpoint of BISEI SANGYO Co., LTD
    Mr Toru Miyawaki, Managing Executive Officer of BISEI SANGYO Co.,LTD / Chairman of Hikoneseni Cooperative

Home Sewing Machine Zone
Catering to the B2C market, the Home Sewing Machine Zone, will feature major domestic household sewing machine suppliers. To promote the joy of sewing, a special workshop will be organised by Brother Industries Ltd, Janome Corp, JUKI Corp and JASMA covering topics such as the use of upcycled materials. As part of JIAM 2022 OSAKA’s sustainable development goals, visitors will be taught to sew “cup sleeves” using discarded items and materials from the DIY brand WHTATNOT. Attendees will also learn about upcycling, the process of upgrading unwanted items into new products that are useful. Another highlight will be the awards for JASMA’s “42th Home Sewing Competition for Elementary, Middle, and High School Students”.

Source:

JIAM, Messe Frankfurt Japan Ltd / Messe Frankfurt (HK) Limited

(c) Freudenberg Performance Materials Holding SE & Co. KG
31.10.2022

Freudenberg: Elastic superabsorbers for wound dressings

Freudenberg Performance Materials (Freudenberg) has launched an elastic variant of its flexible superabsorbers for modern wound dressings. These superabsorbers increase the comfort level for patients as well as enabling longer wear time, thus reducing the frequency of dressing changes. Freudenberg is debuting the elastic superabsorbers at this year’s Compamed in Düsseldorf, from November 14 – 17, 2022. Further highlights at the trade fair include components for more sustainable wound care, PU foams with directly applied silicone adhesives, and an innovative hydrophilic debridement foam.

Freudenberg uses a new technology to manufacture the elastic superabsorbers. Unlike other methods, this technology does not perforate or slit the material, thus achieving a high degree of consistent elasticity. Furthermore, the technology used by Freudenberg bonds the superabsorbent fibers more uniformly with the material, thus enhancing the integrity of this layer in the wound dressing.

Freudenberg Performance Materials (Freudenberg) has launched an elastic variant of its flexible superabsorbers for modern wound dressings. These superabsorbers increase the comfort level for patients as well as enabling longer wear time, thus reducing the frequency of dressing changes. Freudenberg is debuting the elastic superabsorbers at this year’s Compamed in Düsseldorf, from November 14 – 17, 2022. Further highlights at the trade fair include components for more sustainable wound care, PU foams with directly applied silicone adhesives, and an innovative hydrophilic debridement foam.

Freudenberg uses a new technology to manufacture the elastic superabsorbers. Unlike other methods, this technology does not perforate or slit the material, thus achieving a high degree of consistent elasticity. Furthermore, the technology used by Freudenberg bonds the superabsorbent fibers more uniformly with the material, thus enhancing the integrity of this layer in the wound dressing.

“Our new elastic superabsorbers demonstrate yet again how Freudenberg components help increase comfort for patients, reduce the workload for nursing staff and lower healthcare costs. Our extensive technology platform and our innovative strength are the basis for this,” Dr. Henk Randau, SVP and General Manager Global Division Healthcare at Freudenberg Performance Materials, said.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

Photo: EREMA
21.10.2022

EREMA: Circular economy for PET fibres

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

"With EREMA's VACUREMA® and INTAREMA® technology and PURE LOOP's ISEC evo technology, our company group already has an extensive range of machines for fibre and PET recycling applications. For ecologically and economically sound recycling, however, new technological solutions are needed to use the recycled fibres in higher-value end applications and to achieve a functioning circular economy," explains Wolfgang Hermann, Business Development Manager Application Fibres & Textiles, EREMA Group GmbH. The initial focus will be on PET, regarded as a key material for the production of synthetic fibres. The aim is to find recycling solutions that allow PET fibre materials to be prepared for reuse in PET fibre production processes. This is a significant step for the circular economy because PET fibres in textiles account for about two-thirds of the total volume of PET.

In this development work, the EREMA Group can build on existing know-how. Proven recycling technologies have been combined with a new IV optimiser. "This extends the residence time of the PET melt, which is particularly necessary in fibre recycling to efficiently remove spinning oils. Our recycling process also increases the IV value of the PET melt after extrusion back to the specific level that is essential for production of the fibre," explains Hermann. Waste PET fibre from production processes can therefore be further processed into rPET filament fibre, carpet yarn and staple fibre.

Fibre test centre with plant to test customers' materials
In order to accelerate development work, EREMA opened its own fibre test centre a few months ago, where a cross-company team is working on recycling solutions for fibre-to-fibre applications.

Source:

EREMA Gruppe

Photo: GOTS
12.10.2022

GOTS celebrates 20-year anniversary with anti-greenwashing campaign

As a world’s leading textile processing standard for organic fibres, Global Organic Textile Standard (GOTS) has been engaged in improving the textile industry for two decades. To commemorate this milestone, GOTS has initiated an awareness campaign to recognise those who have been with them along the way –friends, stakeholders and partners, workers and managers in GOTS certified companies, and the consumers who have supported the standard – from field to fashion.

The centrepiece of the campaign is the "Faces From Field to Fashion" video series. It’s a behind-the-scenes journey to the heart of GOTS, an introduction to the sights, sounds, and faces behind every GOTS product. Representing more than 4 million people working in GOTS certified facilities around the world, eight individuals give a glimpse into their lives and tell how they have been impacted by GOTS in unscripted and candid video portraits.

As a world’s leading textile processing standard for organic fibres, Global Organic Textile Standard (GOTS) has been engaged in improving the textile industry for two decades. To commemorate this milestone, GOTS has initiated an awareness campaign to recognise those who have been with them along the way –friends, stakeholders and partners, workers and managers in GOTS certified companies, and the consumers who have supported the standard – from field to fashion.

The centrepiece of the campaign is the "Faces From Field to Fashion" video series. It’s a behind-the-scenes journey to the heart of GOTS, an introduction to the sights, sounds, and faces behind every GOTS product. Representing more than 4 million people working in GOTS certified facilities around the world, eight individuals give a glimpse into their lives and tell how they have been impacted by GOTS in unscripted and candid video portraits.

GOTS is inviting the public to celebrate from October through December, as the full video series is unveiled, along with a campaign landing page, creative contests, and fun giveaways. The festivities are expanded with interviews, articles, and other media partnerships.

More information:
GOTS greenwashing
Source:

GOTS

(c) INDA
07.10.2022

INDA: Highlights of the 12th edition of RISE®

  • DiaperRecycle Wins RISE® Innovation Award for Technology that Transforms Used Diapers into Cat Litter

Product development and innovators in nonwovens & engineered materials gained expert insights on material science innovation and sustainability at the 12th edition of RISE® — Research, Innovation & Science for Engineered Fabrics conference, organized by INDA, the Association of the Nonwoven Fabrics Industry, and The Nonwovens Institute, North Carolina State University, Sept. 27-28 at North Carolina State University in Raleigh, NC.

More than 20 industry, academic, and government experts from across the globe presented technical developments in sessions focused on circularity and sustainable inputs from such sources as Polylactic Acid Polymers (PLA), natural fibers, biofibers, and waste products.

  • DiaperRecycle Wins RISE® Innovation Award for Technology that Transforms Used Diapers into Cat Litter

Product development and innovators in nonwovens & engineered materials gained expert insights on material science innovation and sustainability at the 12th edition of RISE® — Research, Innovation & Science for Engineered Fabrics conference, organized by INDA, the Association of the Nonwoven Fabrics Industry, and The Nonwovens Institute, North Carolina State University, Sept. 27-28 at North Carolina State University in Raleigh, NC.

More than 20 industry, academic, and government experts from across the globe presented technical developments in sessions focused on circularity and sustainable inputs from such sources as Polylactic Acid Polymers (PLA), natural fibers, biofibers, and waste products.

Highlights included presentations on Achieving Supply Chain Circularity, by Kat Knauer, Ph.D., Program Manager – V Research, National Renewable Energy Laboratory, NREL; The Global Plastic Crisis: Winners/Losers in the Marketplace, by Bryan Haynes, Ph.D., Senior Technical Director, Global Nonwovens, Kimberly-Clark Corporation; Sustainable Fibers – Development and the Future by Jason Locklin, Ph.D. Director, University of Georgia – New Materials Institute; PLA & PLA Blends: Practical Aspects of Extrusion by Behnam Pourdeyhimi, Ph.D., William A. Klopman Distinguished Professor, and Executive Director, The Nonwovens Institute, North Carolina State University; and Mitigation of Quat Incompatibility with Cotton and other Cellulosic-based Substrates, by Doug Hinchliffe, Ph.D., Research Molecular Biologist, USDA-ARS.

RISE® Innovation Award Winner
DiaperRecycle was awarded the RISE® Innovation Award for its innovative technology to recycle used diapers into absorbent and flushable cat litter. The annual award recognizes innovation in areas within and on the periphery of the nonwovens industry that use advanced science and engineering principles to develop unique or intricate solutions to problems and advance  nonwovens usage.

By diverting used diapers from households and institutions, and separating the plastic and fiber, DiaperRecycle strives to decrease the climate-changing emissions of diapers from landfills.  “I am thrilled and grateful to win this award — as it proves we are on the right track,” said Cynthia Wallis Barnicoat, CEO of DiaperRecycle.

Other award finalists included Binder BioHook® by Gottlieb Binder GmbH & Co. KG and Sero® hemp fibers from Bast Fibre Technologies, Inc. (BFT).

The 13th edition of RISE® — Research, Innovation & Science for Engineered Fabrics conference will be held Sept. 12-13, 2023 at North Carolina State University in Raleigh, NC.

Source:

INDA

04.10.2022

Carbios appoints new Director of Operations and Expertise Team

  • Stéphane Ferreira joined Carbios as Director of Operations and Executive Committee Member, on October 10, 2022.
  • Frédéric Alarcon appointed Licensing Manager
  • Arnaud Tillon appointed Group Marketing Director
  • New areas of expertise complete the seniority of Carbios’ leadership team, following June appointments of Mathieu Berthoud as Sourcing and Public Affairs Director, Lionel Arras as Industrial Director, and Pascal Bricout as Strategy and Finance Director.
  • Departure of Martin Stephan, Deputy CEO

Carbios strengthens its organization with the appointment of Stéphane Ferreira as Director of Operations. He will be in charge of the business’ global development and will steer the relationship with Carbios’ industrial and commercial partners.

Stéphane Ferreira's team will be reinforced by two new members, including:

  • Stéphane Ferreira joined Carbios as Director of Operations and Executive Committee Member, on October 10, 2022.
  • Frédéric Alarcon appointed Licensing Manager
  • Arnaud Tillon appointed Group Marketing Director
  • New areas of expertise complete the seniority of Carbios’ leadership team, following June appointments of Mathieu Berthoud as Sourcing and Public Affairs Director, Lionel Arras as Industrial Director, and Pascal Bricout as Strategy and Finance Director.
  • Departure of Martin Stephan, Deputy CEO

Carbios strengthens its organization with the appointment of Stéphane Ferreira as Director of Operations. He will be in charge of the business’ global development and will steer the relationship with Carbios’ industrial and commercial partners.

Stéphane Ferreira's team will be reinforced by two new members, including:

  • Frédéric Alarcon, Licensing Manager, who joined Carbios on September 5. His role is to build and deploy the process licensing model that is at the heart of Carbios’ business model;
  • Arnaud Tillon, Group Marketing Director, who joined the firm on September 12. He will support the company’s development by defining and deploying the marketing strategy. He is also in charge of reinforcing the customer culture within the organization.

Martin Stephan will leave his position as Deputy CEO on October 15, 2022, after nearly six years at Carbios.

Emmanuel Ladent, Carbios’ Chief Executive Officer: "The appointment of Stéphane Ferreira as Director of Operations is excellent news for Carbios. His extensive experience in global markets will help Carbios reach a new level, by deploying the company’s proprietary technologies on a large scale. I am also very pleased with the recent arrivals of Frédéric Alarcon and Arnaud Tillon, whose respective expertise in licenses and mass-market offers will be invaluable. Lastly, on behalf of all Carbios’ teams, I want to salute and thank Martin Stephan for his continued commitment to the company’s development. His experience, expertise and skills have been key to developing partnerships which have enabled Carbios to be so close to industrial deployment and recognized as the future worldwide leader of plastics and fibers in the circular economy."

More information:
Carbios Managing Director
Source:

Carbios

04.10.2022

Carbios appoints Pascal Bricout as Chief Strategy and Financial Officer

Carbios announced the appointment of Pascal Bricout as Chief Strategy and Financial Officer and a member of the Company’s Executive Committee.

Mr. Bricout will oversee the management and organization of Carbios’ Finance division. He will also steer the Group’s Strategy, investor relations and the launch of the company’s Corporate Social Responsibility policy. He joins the company with over 30 years’ experience in finance, strategy and international mergers and acquisitions.
 
Prior to joining Carbios, Mr. Bricout served as Chief Financial Officer for Michelin in Asia, which is a major area of growth and development for the company. Over the past 10 years, he has focused primarily on major strategic mergers and acquisitions.

Mr. Bricout holds a Master Degree in Finance from Université Paris-Dauphine. He began his career at PwC, as a manager in the International Transactions Services teams in Paris and London.

Carbios announced the appointment of Pascal Bricout as Chief Strategy and Financial Officer and a member of the Company’s Executive Committee.

Mr. Bricout will oversee the management and organization of Carbios’ Finance division. He will also steer the Group’s Strategy, investor relations and the launch of the company’s Corporate Social Responsibility policy. He joins the company with over 30 years’ experience in finance, strategy and international mergers and acquisitions.
 
Prior to joining Carbios, Mr. Bricout served as Chief Financial Officer for Michelin in Asia, which is a major area of growth and development for the company. Over the past 10 years, he has focused primarily on major strategic mergers and acquisitions.

Mr. Bricout holds a Master Degree in Finance from Université Paris-Dauphine. He began his career at PwC, as a manager in the International Transactions Services teams in Paris and London.

Mr. Bricout, Carbios’ Chief Strategy & Financial Officer noted: “I am thrilled to be joining Carbios and proud to take part in this concrete, meaningful advance toward circular economy. Having developed unparalleled breakthrough technologies in plastic and textile biodegradation and biorecycling, Carbios now needs to execute a successful industrial and commercial phase. This is crucial for companies using PET to achieve, from 2025, their sustainable development goals. Within this dynamic context, Carbios and its subsidiary, Carbiolice, are poised to become global leaders in the development and industrialization of innovative bioprocesses to revolutionize the life cycles of plastics and textiles.”

More information:
Carbios green chemistry polymer
Source:

Carbios

30.09.2022

Suominen launches nonwoven with a tri-layer structure

Suominen’s newest tri-layer nonwoven, FIBRELLA® Strata, delivers a combination of strength and softness and can be used in various applications. Especially for the Baby market FIBRELLA® Strata offers a nonwoven with a high-definition patterning in a multi-layer structure while delivering softness and cleaning performance.

“When developing FIBRELLA® Strata, Suominen used its process know-how to create a nonwoven that has a high-definition pattern. The product maintains the pattern when wet to help enhance its cleaning performance and bulk softness. FIBRELLA® Strata’s unique tri-layer structure makes it stand out on the market,” says Tara Millar, Manager, Category Management, Americas.

Suominen’s newest tri-layer nonwoven, FIBRELLA® Strata, delivers a combination of strength and softness and can be used in various applications. Especially for the Baby market FIBRELLA® Strata offers a nonwoven with a high-definition patterning in a multi-layer structure while delivering softness and cleaning performance.

“When developing FIBRELLA® Strata, Suominen used its process know-how to create a nonwoven that has a high-definition pattern. The product maintains the pattern when wet to help enhance its cleaning performance and bulk softness. FIBRELLA® Strata’s unique tri-layer structure makes it stand out on the market,” says Tara Millar, Manager, Category Management, Americas.

Source:

Suominen

Photo: Messe Frankfurt (HK) Ltd.
29.09.2022

Cinte Techtextil China returns this December

Following its deferral earlier this year, organisers announced that Cinte Techtextil China 2022 will take place from 7 – 9 December at the National Exhibition and Convention Center, Shanghai. The coming edition will address the latest trends, technologies and applications that are shaping the industry and market in the region.

“We are excited that Cinte Techtextil China is going ahead this year,” said Ms Wilmet Shea, Deputy General Manager of Messe Frankfurt (HK) Ltd. “The technical textiles and nonwovens sectors are constantly innovating, and congregating regularly to share new materials and knowledge is essential for the industry. For this reason, this year’s fair has attracted international and domestic exhibitors from Austria, Belgium, Mainland China, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US to grow their business in the enticing Chinese market.”

Following its deferral earlier this year, organisers announced that Cinte Techtextil China 2022 will take place from 7 – 9 December at the National Exhibition and Convention Center, Shanghai. The coming edition will address the latest trends, technologies and applications that are shaping the industry and market in the region.

“We are excited that Cinte Techtextil China is going ahead this year,” said Ms Wilmet Shea, Deputy General Manager of Messe Frankfurt (HK) Ltd. “The technical textiles and nonwovens sectors are constantly innovating, and congregating regularly to share new materials and knowledge is essential for the industry. For this reason, this year’s fair has attracted international and domestic exhibitors from Austria, Belgium, Mainland China, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US to grow their business in the enticing Chinese market.”

The Chinese market performance has remained strong amidst the pandemic. According to the China Nonwovens & Industrial Textiles Association (CNITA), China’s nonwovens output has an average two-year growth rate of 14.8% despite the decreased demand for anti-pandemic materials. In addition, China strengthened its position as one of the key drivers of the global technical textiles market due to the rapid expansion of the automotive sector in the country which stimulates high demand for technical textiles.
To help international buyers stay connected with the Chinese market, Match Plus, the fair’s online business matching platform, will support foreign buyers achieve their sourcing goals despite travel limitations.

The fair is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA).

More information:
Cinte Techtextil China
Source:

Messe Frankfurt (HK) Ltd.

Photo: Reifenhäuser
15.09.2022

PFNonwovens invests in Reicofil RF5 technology in South Africa

RF5 SMMS 3200 nonwovens line is scheduled to be commissioned in the fourth quarter of 2022, and will be the first Reicofil 5 (RF5) line operating in Africa.

PFNonwovens is one of the most innovative nonwoven companies in the world, and continues to grow its footprint in the US, Europe and Africa. PFN wants to set a new benchmark of high-quality and innovative products for the Southern African markets with this purchase.

RF5 SMMS 3200 nonwovens line is scheduled to be commissioned in the fourth quarter of 2022, and will be the first Reicofil 5 (RF5) line operating in Africa.

PFNonwovens is one of the most innovative nonwoven companies in the world, and continues to grow its footprint in the US, Europe and Africa. PFN wants to set a new benchmark of high-quality and innovative products for the Southern African markets with this purchase.

Markus Mueller, Sales Director of Reifenhäuser Reicofil and Key Account Manager for PFNonwovens, adds: “Since 2018, Reicofil has been delivering RF5 lines to support the global hygiene industry across four continents. The hygiene industry values the consistent product quality provided by RF5 and the key product performance properties it delivers at lower basis weights helping to drive industry sustainability goals. With an energy requirement of 1-1.2 kilowatt hours per kilogram produced, Reicofil 5 manages the conversion from raw material to nonwoven more efficiently than any other technology on the market. We are very pleased that after many years of partnership cooperation with PFNonwovens, we are now able to establish this technology at their South Africa location and look forward to our further collaboration to serve the hygiene and medical market in the whole region with top quality products.”

Source:

Reifenhäuser