From the Sector

Reset
5615 results
Drop in orders intake in third quarter 2023 Graphic ACIMIT
07.11.2023

Italian textile machinery: Drop in orders intake in third quarter 2023

The textile machinery orders index, as processed by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped fully 20% during the third quarter of 2023, compared to the same period for July to September 2022. In absolute terms, the index stood at 84.2 points (basis: 2015=100).

This result is due to a reduction in new orders recorded by manufacturers both on the domestic market and abroad. The decrease in orders in Italy came in at 45%, whereas the drop was just 13% on foreign markets. The absolutevalue of the index abroad stood at 80.5 points, and 119.4 points in Italy. During the year’s third quarter, new orders reached 3.7 months of assured production.

The textile machinery orders index, as processed by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped fully 20% during the third quarter of 2023, compared to the same period for July to September 2022. In absolute terms, the index stood at 84.2 points (basis: 2015=100).

This result is due to a reduction in new orders recorded by manufacturers both on the domestic market and abroad. The decrease in orders in Italy came in at 45%, whereas the drop was just 13% on foreign markets. The absolutevalue of the index abroad stood at 80.5 points, and 119.4 points in Italy. During the year’s third quarter, new orders reached 3.7 months of assured production.

ACIMIT President Marco Salvadè commented on the data, stating that, “The order index for the period from July to September 2023 confirms a contraction in collected orders that was already evident in previous quarters. What worries us above all is the situation with our domestic market, where the declining trend has persisted for seven consecutive terms. Due to this situation, which does not only concern the textile machinery industry, urgent measures are needed from Italian Government to strengthen the competitiveness of Italian manufacturers.”

As far as foreign markets are concerned, the orders index confirms an overall weakened global demand for textile machinery. Indeed, for the first half of 2023, Italian exports slowed in a variety of essential benchmark markets, such as Turkey, China and the United States.

“The global economic scenario remains negative, as consumers are facing a reduced purchasing power, with investments in the textile sector consequently also slowing down,” concludes Salvadè. “In less than a month, ITMA ASIA + CITME will be held from 19 to 23 November in Shanghai, primed as one of the world’s major trade fairs for the textile machinery industry, with the participation of roughly 60 Italian textile machinery manufacturers. We can expect some significant indications on the industry’s state from this event, which will be staged in one of the strategic markets for textile machinery demand.”

More information:
Italy ACIMIT
Source:

ACIMIT

Maike Bruns Photo Dibella GmbH
Maike Bruns
07.11.2023

Dibella: Sales team in France is growing

As part of the company's international expansion, the growing French market is becoming increasingly important. This is why the textile company is now broadening its organisation: since mid-October 2023 Maike Bruns joined the sales team in France on a permanent basis.

The communications graduate has already lived in Paris and most recently promoted sales and market development in an Amsterdam start-up in the healthtech sector.

At Dibella, her focus will be on representing the company on the French market, supporting the existing team and jointly expanding the French customer base.

As part of the company's international expansion, the growing French market is becoming increasingly important. This is why the textile company is now broadening its organisation: since mid-October 2023 Maike Bruns joined the sales team in France on a permanent basis.

The communications graduate has already lived in Paris and most recently promoted sales and market development in an Amsterdam start-up in the healthtech sector.

At Dibella, her focus will be on representing the company on the French market, supporting the existing team and jointly expanding the French customer base.

More information:
Dibella sales France
Source:

Dibella GmbH

North American Nonwovens Industry Outlook 2022-2027 (c) INDA
07.11.2023

North American Nonwovens Industry Outlook 2022-2027 released

INDA, the Association of the Nonwoven Fabrics Industry, has released a new report, North American Nonwovens Industry Outlook, 2022-2027. This report is the twelfth edition detailing demand data for 2017 through 2022, with forecasts to 2027 and provides analysis across end-use markets through 2027.

It includes:

INDA, the Association of the Nonwoven Fabrics Industry, has released a new report, North American Nonwovens Industry Outlook, 2022-2027. This report is the twelfth edition detailing demand data for 2017 through 2022, with forecasts to 2027 and provides analysis across end-use markets through 2027.

It includes:

  • Economic and population drivers contributing to market growth over the next 5 years for markets in the U.S., Mexico, and Canada.
  • Disposable, Filtration, Wipes, Medical and Other applications.
  • Long-Life durable sectors for Transportation, Building and Construction, Furnishings, Geo and Agro Textiles, and Apparel.
  • Key drivers for the demand models and reasons for market upsets like the COVID pandemic.
  • A summary of historical and future trends that will affect the nonwovens market.

The report provides analysis across all nonwoven end-use markets, providing a comprehensive and accurate view of the total North American nonwovens industry. INDA redesigned this report to support strategic business planning and decision-making. The projections in the report were made by analyzing current market trends and drivers to highlight the market potential in terms of dollar value, units, and volume in both square meters and tonnage.

The new North American Nonwovens Industry Outlook report is available at 6,000.00 $, the discounted member price is 4,500.00

More information:
Market report INDA
Source:

Association of the Nonwoven Fabrics Industry

06.11.2023

Mahlo presents new solutions at ITMA Asia 2023

Mahlo GmbH + Co. KG will present its systems and solutions for efficient and high-quality textile production and finishing together with Shanghai Kuantex at ITMA Asia (November 19 and 23). The focus will be on the machine manufacturer's new straightening concept, the Orthopac RXVMC.

"In the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the probe system," explains Sales Manager Thomas Höpfl. The control concept is also new. A probe group at the leveler infeed detects distortions even before they reach the correction rolls. In this way, the rolls are brought directly into position and the fabric is corrected from the very first centimeter. A scanner group at the outfeed also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions. The Orthopac RXVMC therefore shows its full strength when straightening knitwear and fabrics sensitive to distortion.

Mahlo GmbH + Co. KG will present its systems and solutions for efficient and high-quality textile production and finishing together with Shanghai Kuantex at ITMA Asia (November 19 and 23). The focus will be on the machine manufacturer's new straightening concept, the Orthopac RXVMC.

"In the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the probe system," explains Sales Manager Thomas Höpfl. The control concept is also new. A probe group at the leveler infeed detects distortions even before they reach the correction rolls. In this way, the rolls are brought directly into position and the fabric is corrected from the very first centimeter. A scanner group at the outfeed also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions. The Orthopac RXVMC therefore shows its full strength when straightening knitwear and fabrics sensitive to distortion.

Also contributing to high-quality textile production and finishing is the Famacont PMC for controlling weft and stitch course density, which will also be on show at ITMA Asia. The Famacont PMC-15 uses a sensor to measure the yarn or stitch density and compares it with the target value stored in the recipe data management system. The detected deviation of the yarn density from the target value is used to fully automatically regulate the leading during the needling process on the stenter frame. Interested parties can have the mode of operation explained to them at the Mahlo booth with the help of a demo tower and their own or provided fabric samples.

Another major topic remains Industry 4.0, because the best measured data is of no use if it cannot be utilized. Mahlo has continuously developed its digital environment mSmart. "Our systems generate data that the customer can use immediately to regulate goods on-line. At the same time, all measured values are backed up in our data management system mLog enhanced and can be retrieved at any time. With this historical data, processes can be optimized and weak points in the process can be minimized," explains Sales Manager Thomas Höpfl.

Baldwin at ITMA Asia 2023 with Precision Spray TexCoat™ System (c) Baldwin Technology Company Inc.
06.11.2023

Baldwin at ITMA Asia 2023 with Precision Spray TexCoat™ System

Baldwin Technology Company Inc. will showcase its TexCoat™ G4 precision spray finishing system at ITMA Asia 2023 (November 19-23, National Exhibition and Convention Center, Shanghai). ITMA Asia participants can stop by and see Baldwin’s wide array of TexCoat G4-applied fabric samples from textile mills around the world and experience what precision finishing feels like while learning how the technology eliminates chemistry waste on changeover, saves water, and achieves faster speeds through the stenter frame and relaxed dryer.
 
Baldwin’s team will be available to discuss how the company’s technology can meet the textile supply chain’s sustainability and carbon footprint goals while improving performance and saving money. In the context of a cost-sensitive global economy and an increased focus by brands, consumers and regulatory agencies on sustainability, customers are placing a premium on sustainability-advantage textile production.

Baldwin Technology Company Inc. will showcase its TexCoat™ G4 precision spray finishing system at ITMA Asia 2023 (November 19-23, National Exhibition and Convention Center, Shanghai). ITMA Asia participants can stop by and see Baldwin’s wide array of TexCoat G4-applied fabric samples from textile mills around the world and experience what precision finishing feels like while learning how the technology eliminates chemistry waste on changeover, saves water, and achieves faster speeds through the stenter frame and relaxed dryer.
 
Baldwin’s team will be available to discuss how the company’s technology can meet the textile supply chain’s sustainability and carbon footprint goals while improving performance and saving money. In the context of a cost-sensitive global economy and an increased focus by brands, consumers and regulatory agencies on sustainability, customers are placing a premium on sustainability-advantage textile production.

TexCoat G4’s non-contact spray technology offers numerous advantages compared to outdated finishing-chemistry application methods. TexCoat G4 processes a wide range of low-viscosity water-based chemicals, such as durable water-repellents –  including PFAS-free, softeners, anti-microbials, easy-care and flame retardants. The company's technology uses the same chemicals as found in traditional pad baths with no special auxiliaries required.

Testimonial videos from Pincroft Dyeing and Print Works and Graniteville Specialty Fabrics along with a video highlighting Baldwin’s partnership with North Carolina State University will also be screened at their stand.

Source:

Baldwin Technology Company Inc.

06.11.2023

Recap of GenovaJeans

Responsible innovation plays a leading role at GenovaJeans, the initiative dedicated to new-generation jeans GenovaJeans, the initiative held in Genoa from 5 to 8 October and dedicated to the new generation of jeans, set the premises for the creation of a community dedicated to this iconic, revolutionary and innovative garment.

30 prominent industry leaders, divided into three categories (heritage, new creatives and production chain) created a inspiring experience in historic venues in the heart of the city. Presented in-group exhibitions, they forged a circular journey from the design to the creation of jeans, from the ingredient to the final outfit, and vice versa.

Heritage brands, exploring the history, evolution and best practices of this iconic garment, were hosted inside the Biblioteca Universitaria and included Blue Blanket Division, Blue Of A Kind, Diesel, IMIJT35020 By Canova, Incotex Blue Division, Mud Jeans, Pepe Jeans, Roy Roger's, Stefano Chiassai and Tela Genova.

Responsible innovation plays a leading role at GenovaJeans, the initiative dedicated to new-generation jeans GenovaJeans, the initiative held in Genoa from 5 to 8 October and dedicated to the new generation of jeans, set the premises for the creation of a community dedicated to this iconic, revolutionary and innovative garment.

30 prominent industry leaders, divided into three categories (heritage, new creatives and production chain) created a inspiring experience in historic venues in the heart of the city. Presented in-group exhibitions, they forged a circular journey from the design to the creation of jeans, from the ingredient to the final outfit, and vice versa.

Heritage brands, exploring the history, evolution and best practices of this iconic garment, were hosted inside the Biblioteca Universitaria and included Blue Blanket Division, Blue Of A Kind, Diesel, IMIJT35020 By Canova, Incotex Blue Division, Mud Jeans, Pepe Jeans, Roy Roger's, Stefano Chiassai and Tela Genova.

The new creatives, a new generation of designers who have adopted innovative eco-design strategies to create smart jeans, were present inside Edificio Metelino in the Darsena area and included Andrea Grossi, Gilberto Calzolari, Gimmijeans, Jeanne Friot, Marcello Pipitone with Albiate 1830, Ksenia Schnaider, Patine, Regenesi, The Blue Suit with ROICA™ by Asahi Kasei and Zerobarracento.

The production chain, composed of companies in the supply and value chain, representing the major stages in the production process, were made up of Albiate 1830 - Albini Group, Cadica, Candiani Denim, Circulose®, Officina39, Pure Denim with Bemberg™ By Asahi Kasei, Soko, Tencel™, Tonello, YKK Italia and were housed inside the Ex Oratorio di San Tommaso.

The responsible innovation, ethics and transparency adopted by each company taking part in the circular journey of GenovaJeans were explained through a QR code powered by C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy) that provided information on the garments, their composition, production phases and company values.

More information:
GenovaJeans Denim jeans production
Source:

GenovaJeans / GB Network Marketing & Communication Srl.

06.11.2023

AkzoNobel publishes results for Q3 2023

Highlights Q3 2023 (compared with Q3 2022)

  • Revenue in constant currencies up 5% on pricing, despite flat volumes; reported revenue 4% down on unfavorable exchange rates
  • Operating income improved to €354 million (2022: €168 million)
  • Adjusted operating income at €324 million (2022: €184 million); ROS 11.8% (2022: 6.4%)
  • Net cash from operating activities positive €297 million (2022: €126 million)
  • Net debt to EBITDA leverage ratio improved sequentially to 3.2x

2023 Outlook
AkzoNobel expects the ongoing macro-economic uncertainties to continue and weigh on organic volume growth. The company will focus on margin management, cost reduction, working capital normalization and de-leveraging.

Cost reduction programs are expected to partly mitigate higher than expected inflationary pressure on operating expenses for 2023. AkzoNobel expects declining raw material costs to have a favorable impact on profitability.

Based on current market conditions, AkzoNobel targets to deliver around €1.45 billion adjusted EBITDA.

Highlights Q3 2023 (compared with Q3 2022)

  • Revenue in constant currencies up 5% on pricing, despite flat volumes; reported revenue 4% down on unfavorable exchange rates
  • Operating income improved to €354 million (2022: €168 million)
  • Adjusted operating income at €324 million (2022: €184 million); ROS 11.8% (2022: 6.4%)
  • Net cash from operating activities positive €297 million (2022: €126 million)
  • Net debt to EBITDA leverage ratio improved sequentially to 3.2x

2023 Outlook
AkzoNobel expects the ongoing macro-economic uncertainties to continue and weigh on organic volume growth. The company will focus on margin management, cost reduction, working capital normalization and de-leveraging.

Cost reduction programs are expected to partly mitigate higher than expected inflationary pressure on operating expenses for 2023. AkzoNobel expects declining raw material costs to have a favorable impact on profitability.

Based on current market conditions, AkzoNobel targets to deliver around €1.45 billion adjusted EBITDA.

Leverage guidance remains unchanged at less than 3 times net debt/EBITDA by the end of 2023, excluding the Kansai Paint Africa acquisition which is not expected to close before year end.

More information:
AkzoNobel financial year 2023
Source:

AkzoNobel

Trumpler and Archroma launch tanning process for leather production Photo: Archroma
06.11.2023

Trumpler and Archroma launch tanning process for leather production

Trumpler has teamed up with Archroma to offer a leather production process that can be used to produce high-performance leather in a more eco-friendly and cost-efficient way.

The new process DyTan®combines offers an alternative to existing metal-free and chrome-tanned leather. It enables the reliable production of leather with great shavability, color depth and migration and abrasion resistance. Free from metal salts and reactive aldehydes, DyTan® is suitable for a wide range of leather applications, from garment and footwear to automotive and furniture upholstery, for today’s eco-conscious leather producers and consumers.

At the core of the DyTan® process is Archroma’s patented AVICUERO® System, which is based on novel molecules that enable more sustainable leather tanning and dyeing, developed by Archroma in cooperation with leather technology consultant Dr Leather. It enables collagen fibers in the leather to be covalently cross-linked through a simplified process at low temperatures. As a result, the system shows strong potential to save energy and water, while also reducing process time and CO2 emissions by up to 23%.*

Trumpler has teamed up with Archroma to offer a leather production process that can be used to produce high-performance leather in a more eco-friendly and cost-efficient way.

The new process DyTan®combines offers an alternative to existing metal-free and chrome-tanned leather. It enables the reliable production of leather with great shavability, color depth and migration and abrasion resistance. Free from metal salts and reactive aldehydes, DyTan® is suitable for a wide range of leather applications, from garment and footwear to automotive and furniture upholstery, for today’s eco-conscious leather producers and consumers.

At the core of the DyTan® process is Archroma’s patented AVICUERO® System, which is based on novel molecules that enable more sustainable leather tanning and dyeing, developed by Archroma in cooperation with leather technology consultant Dr Leather. It enables collagen fibers in the leather to be covalently cross-linked through a simplified process at low temperatures. As a result, the system shows strong potential to save energy and water, while also reducing process time and CO2 emissions by up to 23%.*

The DyTan® process combines the AVICUERO® System with Trumpler’s bio-based fatliquors and retanning agents based on functional biopolymers produced from hydrolyzed shavings – resource-saving technology that Trumpler has been refining for 15 years.

As a global partner of Archroma, the Trumpler Group is responsible for the distribution of the AVICUERO® System worldwide. Delivering technical support and first-class customer care, Trumpler will help leather manufacturers and brands to implement sustainable tanning and draw on its comprehensive product portfolio and process knowledge of tanning, retanning and fatliquoring processes.
 

* Estimations carried out with the Archroma ONE WAY Impact Calculator show energy savings of up to 25% and reduced process time leading to a reduction in CO2 emissions of up to 23%, compared to traditional chrome tanning. They also show significant water savings compared to other metal-free tanning systems1. With the ONE WAY Impact Calculator, customers will be offered personalized calculations for their specific processes.

1 Trials made at Trumpler GmbH application lab.

Source:

Archroma

06.11.2023

Solvay: 2023 third quarter results

Highlights

Highlights

  • Net sales in the third quarter of 2023 were down by -20.3% organically versus a record Q3 2022 as expected due to -15% lower volumes (€-512 million) in a weaker macro environment and -5% lower prices (€-188 million) in a context of lower raw material costs and energy prices. On a sequential basis, net sales were down -11% versus Q2. The volume reduction was broad based across regions and businesses.
  • Structural cost savings for the first nine months of 2023 amounted to €63 million, bringing the total savings since 2019 to €530 million.
  • Underlying EBITDA of €702 million in Q3 2023 was down by -18.5% organically compared to a record Q3 2022 driven by lower volumes, partly offset by €36 million in positive net pricing and €41 million in lower fixed costs. Nine months EBITDA at €2,331 million is only down -1% organically versus 2022, a clear indication that strong historic pricing and cost discipline momentum is being maintained.
  • The underlying EBITDA margin of 25.6% in Q3 2023 was sustained relative to Q3 2022 despite lower volumes, while nine months EBITDA margin of 25.9% is +1.3pp higher, mainly as a result of positive net pricing and cost discipline.
  • Underlying Net Profit was €340 million in Q3 2023 compared to €509 million in Q3 2022.
  • Free Cash Flow of €346 million in Q3 2023 resulted in a nine-month 2023 total of €1,027 million and a FCF conversion ratio of 39.4%.
  • ROCE was 15.2%, broadly in line with Q3 2022.
  • Continued strengthening of the balance sheet with underlying net debt at €2.8 billion, which translated to a historic low leverage of 0.9x.
  • As explained on page 2, an interim dividend of €1.62 gross per share has been validated by the Board of Directors, in line with historical interim dividend policy to be paid by Solvay SA on January 17, 2024.

2023 Outlook
Given the current volume momentum, Solvay reconfirm their full year guidance, at the lower end of the prior EBITDA guidance range.

More information:
Solvay financial year 2023
Source:

Solvay

DITF: Pleated textile tube for ventilation of surgical fields Photo: Wandres GmbH micro-cleaning
06.11.2023

DITF: Pleated textile tube for ventilation of surgical fields

The German Institutes of Textile and Fiber Research Denkendorf (DITF) will be exhibiting at the MEDICA medical technology trade fair in Düsseldorf from November 13 to 16, 2023. At the joint stand of Baden-Württemberg International, a new development will be shown, that can reduce infections during operations.

These nosocomial infections occur when surgical wounds are contaminated by microbes. They can lead to serious complications. The task of the contract development was to create a porous ring tube that reduces the risk of contamination during operations. Germ-free air is introduced into the operating field via the so-called airflow ring, thereby shielding pathogenic germs.

The tube is knitted from polyester and folded. This pleating ensures that the circular shape remains stable, but the tube is still flexible. The outside of the tube is coated so that the air is directed into the inner area of the airflow ring. The ring is attached to the skin with a biocompatible adhesive so that it fits tightly on curved areas of the body such as the face or around joints. The position of the ring can be easily changed.

The German Institutes of Textile and Fiber Research Denkendorf (DITF) will be exhibiting at the MEDICA medical technology trade fair in Düsseldorf from November 13 to 16, 2023. At the joint stand of Baden-Württemberg International, a new development will be shown, that can reduce infections during operations.

These nosocomial infections occur when surgical wounds are contaminated by microbes. They can lead to serious complications. The task of the contract development was to create a porous ring tube that reduces the risk of contamination during operations. Germ-free air is introduced into the operating field via the so-called airflow ring, thereby shielding pathogenic germs.

The tube is knitted from polyester and folded. This pleating ensures that the circular shape remains stable, but the tube is still flexible. The outside of the tube is coated so that the air is directed into the inner area of the airflow ring. The ring is attached to the skin with a biocompatible adhesive so that it fits tightly on curved areas of the body such as the face or around joints. The position of the ring can be easily changed.

The functionality of the airflow ring was successfully demonstrated in tests with nebulized colony-forming bacteria.

The tests showed that the ring also withstands significantly worse conditions than in an operating theater, e.g. in doctors' surgeries and in situations with lower hygiene standards.

Three Swiss Brands introduce the "Extraordinary Jacket" Photo: Mammut
The Extraordinary Jacket, a joint development by Nespresso, Mammut, and HeiQ
06.11.2023

Three Swiss Brands introduce the "Extraordinary Jacket"

In a celebration of Innovation and Swiss identity the three brands Nespresso, Mammut, and HeiQ have joined forces to create the "Extraordinary Jacket".

The Extraordinary Jacket is a testament to Swiss design and innovation. Mammut's super-light Ajungilak® insulation now incorporates HeiQ XReflex technology powered by Xefco, which contains part of the aluminum from recycled Nespresso capsules.

Being up in the mountains comes with significant temperature drops. Mammut, HeiQ and Nespresso have cocreated this high-performance insulation jacket that delivers great heat retention while being breathable, so one can enjoy more time above the tree line.

What makes the Extraordinary Jacket genuinely extraordinary is its ability to retain 20% more heat than a conventional insulation jacket of similar thickness. The innovative HeiQ XReflex 3D aluminized scrim layer reflects the body's heat radiation within the insulation layers, so the wearer doesn’t have to produce more energy to stay warm, resulting in effortless comfort even in harsh and demanding conditions.

In a celebration of Innovation and Swiss identity the three brands Nespresso, Mammut, and HeiQ have joined forces to create the "Extraordinary Jacket".

The Extraordinary Jacket is a testament to Swiss design and innovation. Mammut's super-light Ajungilak® insulation now incorporates HeiQ XReflex technology powered by Xefco, which contains part of the aluminum from recycled Nespresso capsules.

Being up in the mountains comes with significant temperature drops. Mammut, HeiQ and Nespresso have cocreated this high-performance insulation jacket that delivers great heat retention while being breathable, so one can enjoy more time above the tree line.

What makes the Extraordinary Jacket genuinely extraordinary is its ability to retain 20% more heat than a conventional insulation jacket of similar thickness. The innovative HeiQ XReflex 3D aluminized scrim layer reflects the body's heat radiation within the insulation layers, so the wearer doesn’t have to produce more energy to stay warm, resulting in effortless comfort even in harsh and demanding conditions.

Lenzing and Södra win ITMF Award for cooperation in textile recycling (c) Lenzing AG/Leopold
Lenzing x Södra Project team
06.11.2023

Lenzing and Södra: ITMF Award for cooperation in textile recycling

  • Lenzing and Södra – a long-standing partnership for systemic change
  • International Textile Manufacturers Federation (ITMF) honored the two companies in the "International Cooperation" category
  • EU co-funded recycling project for textiles on an industrial scale

The Lenzing Group, the world’s leading supplier of specialty fibers for the textile and nonwovens industries, and the Swedish pulp producer Södra have received the ITMF Award 2023 in the category “International Cooperation” for their joint achievements in textile recycling and circular economy. The award was presented at the ITMF Annual Conference in Keqiao, China, on November 06, 2023.

  • Lenzing and Södra – a long-standing partnership for systemic change
  • International Textile Manufacturers Federation (ITMF) honored the two companies in the "International Cooperation" category
  • EU co-funded recycling project for textiles on an industrial scale

The Lenzing Group, the world’s leading supplier of specialty fibers for the textile and nonwovens industries, and the Swedish pulp producer Södra have received the ITMF Award 2023 in the category “International Cooperation” for their joint achievements in textile recycling and circular economy. The award was presented at the ITMF Annual Conference in Keqiao, China, on November 06, 2023.

The ITMF Award 2023 is given by the International Textile Manufacturers Federation (ITMF) to recognize outstanding achievements and merits in the textile sector in two categories: ”Sustainability & Innovation“ and ”International Cooperation“. Since 2021, the two pioneers have been joining forces in textile recycling, making a decisive contribution to promoting the circular economy in the fashion industry. As part of the cooperation, the companies intend to share their knowledge with each other and jointly develop processes to enable the wider use of cellulose-based used textiles on a commercial scale.

The OnceMore® pulp from Södra, which was jointly developed further by Södra and Lenzing, is subsequently used, among other things, as a raw material for the production of Lenzing fibers with REFIBRA™ technology. The OnceMore® process makes it possible to process and recycle a blend of cotton and polyester.

ITMF paid particular tribute to the joint LIFE TREATS project (Textile Recycling in Europe AT Scale)1,which was supported by an EU grant of EUR 10m under the LIFE 20222 program and aims to build a large-scale plant at Södra's Mörrum site in Sweden.

For more information on the ITMF Awards 2023, visit the ITMF website.

1 Project 101113614 — LIFE22-ENV-SE-TREATS
2 https://cinea.ec.europa.eu/programmes/life_en

Source:

Lenzing AG

adidas Originals and Wales Bonner present Fall/Winter 2023 (c) adidas AG
06.11.2023

adidas Originals and Wales Bonner present Fall/Winter 2023

adidas Originals and Wales Bonner continue their collaborative partnership with the Fall/Winter 2023 collection.

Off-pitch styles include an elevated knit set in mahogany brown alongside football shorts in a sand colored nylon with the iconic Three Stripes contrast. Swapping creative sources of inspiration from the 70s to the 90s, key pieces are rendered in a lightweight nylon fabrication, including a pale sky tracksuit with reflective piping and a black nylon top with a contrasting vivid green knit collar. All pieces are available in unisex sizing.

Marking a departure from previous seasons, the campaign visuals swap evocative landscapes for a more refined, studio setting. Decidedly new, yet still grounded in the adidas Originals by Wales Bonner lexicon, the visuals capture a mix of models and street cast figures, as well as skateboarder Na-Kel Smith, against minimal backdrops. Accompanying the campaign images are a set of short interviews and moving vignettes, with the cast answering interview questions hosted by playwright, actor, and philanthropist, Jeremy O. Harris.

adidas Originals and Wales Bonner continue their collaborative partnership with the Fall/Winter 2023 collection.

Off-pitch styles include an elevated knit set in mahogany brown alongside football shorts in a sand colored nylon with the iconic Three Stripes contrast. Swapping creative sources of inspiration from the 70s to the 90s, key pieces are rendered in a lightweight nylon fabrication, including a pale sky tracksuit with reflective piping and a black nylon top with a contrasting vivid green knit collar. All pieces are available in unisex sizing.

Marking a departure from previous seasons, the campaign visuals swap evocative landscapes for a more refined, studio setting. Decidedly new, yet still grounded in the adidas Originals by Wales Bonner lexicon, the visuals capture a mix of models and street cast figures, as well as skateboarder Na-Kel Smith, against minimal backdrops. Accompanying the campaign images are a set of short interviews and moving vignettes, with the cast answering interview questions hosted by playwright, actor, and philanthropist, Jeremy O. Harris.

Source:

adidas AG

03.11.2023

New Swiss owners for Heberlein

Heberlein, founded in 1835, successfully completed the sale of its business on 31st of October 2023. The new joint ownership comprises the company’s management, alongside industry expert Daniel Lippuner
and the Renaissance investment foundation. From November 1, 2023, the company will operate under the name "Heberlein Technology AG".

The owners are committed to investing in the long-term success of a business that already combines traditional values with innovative power. The brand is known for its high level of expertise, as well as its tailor-made solutions for the textile business. As the world's leading supplier of jets for synthetic yarns, Heberlein develops, produces, and distributes key components for the man-made fibre industry. Around 80 employees and an efficient infrastructure in Wattwil, Switzerland, ensure that international customers can continue to rely on quality and reliability.

The Renaissance investment foundation was established by pension funds, for pension funds, and has been investing in unlisted Swiss SMEs for over 20 years.

Heberlein, founded in 1835, successfully completed the sale of its business on 31st of October 2023. The new joint ownership comprises the company’s management, alongside industry expert Daniel Lippuner
and the Renaissance investment foundation. From November 1, 2023, the company will operate under the name "Heberlein Technology AG".

The owners are committed to investing in the long-term success of a business that already combines traditional values with innovative power. The brand is known for its high level of expertise, as well as its tailor-made solutions for the textile business. As the world's leading supplier of jets for synthetic yarns, Heberlein develops, produces, and distributes key components for the man-made fibre industry. Around 80 employees and an efficient infrastructure in Wattwil, Switzerland, ensure that international customers can continue to rely on quality and reliability.

The Renaissance investment foundation was established by pension funds, for pension funds, and has been investing in unlisted Swiss SMEs for over 20 years.

Under the new ownership, the Heberlein business will continue unchanged at the current location in Wattwil with the current management and all current employees. The board of directors and management of Heberlein AG welcome this solution and are convinced that the existence of the company and its traditions will now be secured in the long term and that it will continue to develop successfully – positive news also for the business location of Toggenburg and the canton of St. Gallen.

Martin Zuercher, CEO of Heberlein, says of the transaction: "With this sale, we are opening a new, positive chapter in the company's long history. With the Renaissance investment foundation, we found an owner who is focused on long-term success. Together with the energetic management team, I look forward to continuing to make a significant contribution to Heberlein's success in the future."

Source:

Heberlein Technology AG

03.11.2023

Hologenix named 2023 Inc. Power Partner

Hologenix® is an honoree on the second annual Power Partner Awards list by Inc. Business Media. Inc.’s 2023 Power Partner Awards feature B2B organizations across the globe that have proven track records supporting entrepreneurs and helping startups grow. There were 389 companies in all who achieved top marks from clients for being instrumental in their success and made the final list. Hologenix was recognized in the Health & Wellness category, which focuses on companies that provide health and wellness products or services. In order to achieve this status, customers provided written testimonials detailing their experience in working with Hologenix as a partner.

Hologenix® is an honoree on the second annual Power Partner Awards list by Inc. Business Media. Inc.’s 2023 Power Partner Awards feature B2B organizations across the globe that have proven track records supporting entrepreneurs and helping startups grow. There were 389 companies in all who achieved top marks from clients for being instrumental in their success and made the final list. Hologenix was recognized in the Health & Wellness category, which focuses on companies that provide health and wellness products or services. In order to achieve this status, customers provided written testimonials detailing their experience in working with Hologenix as a partner.

“Our business is set up to succeed when our partners succeed, so we are grateful that our partners have affirmed the superior level of support we aim to provide,” said Seth Casden, Hologenix CEO and Co-Founder. “CELLIANT offers something unique to world-class brands looking to deliver health and wellness benefits. Our proprietary technology offers a key textile differentiator for their products, from apparel, bedding and furnishings to medical-use fabrics, bandages and wraps, transportation seating and even saunas.”

More information:
Hologenix Celliant Bedding apparel
Source:

Hologenix, LLC

03.11.2023

Lectra: Financial statements for first nine months of 2023

  • Revenues: 358.3 million euros (-7%)
  • EBITDA before non-recurring items: 59.2 million euros (-17%)
  • Net income: 24.9 million euros (-30%)
  • Free cash flow before non-recurring items: 32.1 million euros
  • 2023 outlook: revised revenues – confirmation of EBITDA before non-recurring items

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the consolidated financial statements for the third quarter and first nine months of 2023, which have not been reviewed by the Statutory Auditors.

Currency changes between 2022 and 2023 mechanically decreased revenues and EBITDA before non-recurring items by 6.4 million euros (-5%) and 2.8 million euros (-10%) respectively in Q3, and by 7.3 million euros (-2%) and 3.0 million euros (-5%) respectively in the first nine months of the year, at actual exchange rates compared to like-for-like figures.

  • Revenues: 358.3 million euros (-7%)
  • EBITDA before non-recurring items: 59.2 million euros (-17%)
  • Net income: 24.9 million euros (-30%)
  • Free cash flow before non-recurring items: 32.1 million euros
  • 2023 outlook: revised revenues – confirmation of EBITDA before non-recurring items

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the consolidated financial statements for the third quarter and first nine months of 2023, which have not been reviewed by the Statutory Auditors.

Currency changes between 2022 and 2023 mechanically decreased revenues and EBITDA before non-recurring items by 6.4 million euros (-5%) and 2.8 million euros (-10%) respectively in Q3, and by 7.3 million euros (-2%) and 3.0 million euros (-5%) respectively in the first nine months of the year, at actual exchange rates compared to like-for-like figures.

Business Trends and Outlook
In its 2022 Financial Report, published February 8, 2023, Lectra presented its new roadmap for 2023-2025. The Group also specified that 2023 remained unpredictable given the degraded macroeconomic and geopolitical environment, which resulted in many uncertainties that could continue to weigh on its customers’ investment decisions.

At the beginning of the year, the Group set itself objectives of achieving, in 2023, revenues in the range of 522 to 576 million euros and EBITDA before non-recurring items in the range of 90 to 113 million euros. It subsequently reported on April 27 that it then anticipated revenues in the range of 485 to 525 million euros and EBITDA before non-recurring items in the range of 78 to 95 million euros.

In what continues to be a highly degraded environment in macroeconomic and geopolitical terms, orders and revenues from new systems in Q3 were lower than anticipated by the Group. Recurring revenues, on the other hand, which should account for over 65% of total revenues in 2023, continued to grow in Q3, and provide good visibility. In addition, the initial measures to reduce overhead costs have begun to bear fruit.

In light of these factors, full-year revenues are now anticipated in the range of 474 to 481 million euros, thus slightly lower than anticipated on April 27, and EBITDA before non-recurring items in the range of 78 to 82 million euros, in the lower part of the range indicated on April 27. These scenarios are based on September 30 exchange rates for Q4, including $1.06 to the euro.

Because the Group's customers operate in a highly competitive environment that demands they continue to improve performance, their investments will pick up as soon as the macroeconomic situation improves. Lectra's roadmap for 2023-2025, which was launched on January 1, 2023, will enable the Group to take full advantage of the upturn and accelerate its growth.

CHT USA celebrates expansion of its headquarters in Michigan (c) CHT Group
03.11.2023

CHT USA celebrates expansion of its headquarters in Michigan

With a ribbon cutting ceremony on October 24, 2023 CHT USA celebrated the $ 25 million expansion at its US headquarters in Cassopolis, Michigan. More than 100 attendees came to the celebrations, among others officials from local, county and state governments, neighbors, and area business leaders, CHT employees, CTO Dr. Bernhard Hettich as representative of CHT’s Global management team, and members of the press.

In his speech, Dr. Bernhard Hettich, CTO of CHT Group, thanked the local authorities for their business-friendly policies and stated that a development towards sustainability in many areas would not be possible without CHT's silicone products: "With CHT's largest single investment outside Europe, CHT is taking a big step and doubling its silicone production capacity. We intend to use this expansion not only to support our customers in the Americas, but also to leverage the capacity for our global growth. In line with the motto "CHT first", further steps in this direction will follow."

With a ribbon cutting ceremony on October 24, 2023 CHT USA celebrated the $ 25 million expansion at its US headquarters in Cassopolis, Michigan. More than 100 attendees came to the celebrations, among others officials from local, county and state governments, neighbors, and area business leaders, CHT employees, CTO Dr. Bernhard Hettich as representative of CHT’s Global management team, and members of the press.

In his speech, Dr. Bernhard Hettich, CTO of CHT Group, thanked the local authorities for their business-friendly policies and stated that a development towards sustainability in many areas would not be possible without CHT's silicone products: "With CHT's largest single investment outside Europe, CHT is taking a big step and doubling its silicone production capacity. We intend to use this expansion not only to support our customers in the Americas, but also to leverage the capacity for our global growth. In line with the motto "CHT first", further steps in this direction will follow."

For the Cass County site, the approximately 45,000 square feet new facility with 5 reactors and distillation units resulted in an increase in the total area of the company's site to 120,000 square feet. This will then allow sufficient space for additional reactors and downstream processes. The CHT USA site expansion has created approximately 30 highly skilled jobs in the community.

CHT USA’s Regional Sales and Marketing Director NORAM, Matthew Loman hosted the Ribbon Cutting ceremony.

More information:
CHT Group USA silicone
Source:

CHT Group

3rd edition of Source Home & Gift taking place in February 2024 Photo: Hyve Group
03.11.2023

3rd edition of Source Home & Gift in February 2024

Source Home & Gift continues to go from strength to strength with over 430 exhibitors expected to be at its third edition from 4th – 7th February 2024 at NEC Birmingham.

Uniting global manufacturers and artisan makers who all pride themselves on responsible manufacturing and sustainable production, with key retailers, brands, and contractors, Source Home & Gift increases in size by 25% with producers from UK, China, India, Philippines, Nepal and many more showcasing their wares. Debuting at the show will be pavilions from Senegal and Ghana.

All exhibitors are required to have had a recent audit from Sedex or a recognisable audit institution giving buyers the confidence that they will meet suppliers that have responsible business practices. The show features eight sectors including Homewares, Toys, Packaging, Stationery & Greetings, Gifts, Furniture, Textiles, and Technology & Services.

Source Home & Gift includes a content stage dedicated to presenting and discussing the latest trends and topics in responsible and sustainable manufacturing from internationally renowned industry professionals.

Source Home & Gift continues to go from strength to strength with over 430 exhibitors expected to be at its third edition from 4th – 7th February 2024 at NEC Birmingham.

Uniting global manufacturers and artisan makers who all pride themselves on responsible manufacturing and sustainable production, with key retailers, brands, and contractors, Source Home & Gift increases in size by 25% with producers from UK, China, India, Philippines, Nepal and many more showcasing their wares. Debuting at the show will be pavilions from Senegal and Ghana.

All exhibitors are required to have had a recent audit from Sedex or a recognisable audit institution giving buyers the confidence that they will meet suppliers that have responsible business practices. The show features eight sectors including Homewares, Toys, Packaging, Stationery & Greetings, Gifts, Furniture, Textiles, and Technology & Services.

Source Home & Gift includes a content stage dedicated to presenting and discussing the latest trends and topics in responsible and sustainable manufacturing from internationally renowned industry professionals.

The last show in September was attended by leading retailers and brands including Sainsburys, Dunelm, Haskins Garden Centre, Blue Diamond, Funky Pigeon, M&M, Matalan, Disney, Morrisons, M&S, Next, Costcutter, AIS, Alzheimers Society, Amazon, B&Q, and Card Factory.

Source:

Source Home & Gift by Hyve Group

03.11.2023

Solvay announces Board of Directors for standalone SYENSQO

Solvay announced the future Board of Directors of SYENSQO, effective upon completion of the planned separation of Solvay into two companies – SOLVAY and SYENSQO – which is on track to be completed in December 2023.

SYENSQO’s Board will be composed of 10 members, including 6 independent members, 3 members representing the reference shareholder, Solvac, and the company CEO. They have deep expertise in specialty industries, international business operations, risk management, corporate governance, finance and clean technology.

Solvay announced the future Board of Directors of SYENSQO, effective upon completion of the planned separation of Solvay into two companies – SOLVAY and SYENSQO – which is on track to be completed in December 2023.

SYENSQO’s Board will be composed of 10 members, including 6 independent members, 3 members representing the reference shareholder, Solvac, and the company CEO. They have deep expertise in specialty industries, international business operations, risk management, corporate governance, finance and clean technology.

The following individuals will serve on the SYENSQO Board of Directors:
Rosemary Thorne will serve as independent Director and Chair of the SYENSQO Board, as well as Chair of the Board’s Finance Committee. She is currently an Independent Director on the Solvay Board of Directors, appointed in 2014, and Chair of the Board’s Audit Committee. She is also an Independent Director on the Board of Merrill Lynch International (UK), a wholly-owned subsidiary of Bank of America, serving as Chair of the Audit Committee. Ms. Thorne has decades of financial leadership experience across a wide range of industries. She previously served as Chief Financial Officer at J. Sainsbury, the UK’s largest supermarket chain at the time; Bradford & Bingley; and Ladbrokes. Ms. Thorne previously sat as an Independent Director on the Boards of Royal Mail Group, Cadbury Schweppes, Santander UK, First Global Trust Bank and Smurfit Kappa Group.

Dr. Ilham Kadri will serve as Chief Executive Officer and member of the Board of Directors of SYENSQO. She is currently CEO and President of the Executive Committee at Solvay. Ms. Kadri has successfully led the turnaround of Solvay, delivering double-digit EBITDA growth and 18 consecutive quarters of positive free cash flow, deleveraging the balance sheet and promoting superior people engagement. She is an independent Board member at A.O. Smith and L’Oréal. She is active in non-profit organizations, as Chair of the World Business Council for Sustainable Development (WBCSD), member of the steering committee of the European Round Table of Industrialists (ERT) as well as a permanent member of the World Economic Forum’s International Business Council (WEF). Ms. Kadri has extensive leadership experience across a variety of industries in four continents and with leading industrial multinationals, including Shell, UCB, Huntsman, Dow, Sealed Air. Prior to Solvay, she was CEO and President of Diversey in the USA, led the company’s return to profitability and resulting spin off and divestiture to Bain Capital. She founded two non-Profit foundations: the Solvay Solidarity Fund in Belgium in 2020 which supported more than 7000 families affected by Covid-19 and natural disasters; and founded the ISSA Hygieia Network in 2015 in the USA, to help women in the cleaning industry. She received two Doctor Honoris Clausa from EWHA University in Korea and Université de Namur in Belgium.

Julian Waldron will serve as independent Director and Chair of the Audit Committee. He currently serves as Deputy Executive Chairman of privately-held Albea Group, a global beauty and personal care packaging company which operates 35 facilities in Europe, Asia and the Americas. Mr. Waldron has held senior leadership roles at several leading listed companies in the industrial, technology and services sectors and brings a wealth of expertise in finance and business operations. Prior to joining Albea in 2022, he was Chief Financial Officer of Suez for three years after serving as Chief Financial Officer and subsequently Chief Operating Officer of Technip. He started his career at UBS Warburg where he spent 14 years. Mr. Waldron also served as an independent Board member and Chairman of finance, risk and investments at Carbon Clean, a privately-owned carbon capture company dedicated to achieving net zero.

Heike Van de Kerkhof will serve as independent Director and Chair of the Nomination Committee. She currently sits on the Board of OCI N.V.. Ms. Van de Kerkhof brings more than 30 years of experience in the chemicals, oil & gas and materials industries, having served in numerous leadership roles around the globe. From 2020 to 2023, she was Chief Executive Officer of Archroma Management, a global specialty chemicals company. During her tenure, she successfully completed the transformational acquisition of Huntsman’s Textile Effects business. Prior to her role at Archroma, Ms. Van de Kerkhof served as Vice President of Lubricants, Western Hemisphere at BP, and held positions at Castrol, The Chemours Company, and Neste Corporation. She also held many leading roles within DuPont over 18 years.

Matti Lievonen will serve as independent Director and Chair of the Compensation Committee. He is currently an independent director on the Solvay Board, appointed in 2017. Mr. Lievonen is a proven executive in the energy, forestry, power and automation industries with an extensive track record of leading businesses through climate transition. For over ten years until 2018, he served as Chairman and Chief Executive Officer of Neste Corporation, a global leader in next-generation renewable fuels and chemicals. During his time at Neste, Mr. Lievonen successfully promoted the development of clean fuels as well as Finland’s bioeconomy strategy in advancing renewable transportation fuels. He has also been involved with organizations such as Fortum Board, SSAB, Nynäs AB, Ilmarinen, and the HE Finnish Fair Foundation. Until 2021, Mr. Lievonen was also Chairman of the Board of Directors at Fortum. He has been recognized for his admirable leadership and expertise, and in 2016 was awarded an Honorary Doctorate of Technology by the Aalto University Schools of Technology.

Dr. Françoise de Viron will serve as non-independent Director, Chair of the ESG Committee and Vice-Chair of the Board. She is currently a director of the Solvay Board, appointed in 2013. Ms. de Viron is a regarded academic leader and has extensive experience in innovation, R&D and qualitative research. She is a Professor Emeritus at the Faculty of Psychology and Education Sciences and Louvain School of Management at UCLouvain in Belgium where she has been an Academic Member of various groups at UCLouvain. Ms. de Viron previously served as the president of AISBL EUCEN – the European Universities Continuing Education Network. Prior to her university position, from 1985 to 2000, she was in charge of developing Artificial Intelligence applications at Tractebel S.A. (now Tractebel-Engie).

Roeland Baan will serve as independent Director. He currently serves as President and Chief Executive Officer of Topsoe, a privately-held leading provider of clean energy and petrochemical technologies. He is also Chairman of the Supervisory Board of SBM Offshore NV. Roeland Baan has extensive experience in supply chain management, M&A, business development and operations management. Prior to joining Topsoe in 2020, he was President and CEO of Outokumpu and has held several executive roles at global organizations such as Aleris International, ArcelorMittal and SHV NV. He spent over 16 years in various roles across the globe at Shell, living in South America, in Africa and in the United Kingdom.

Edouard Janssen will serve as non-independent Director. He is currently a Director on the Solvay Board, appointed in 2021. Earlier this year, he was appointed Chief Financial Officer of D’Ieteren Group, a European leader in automotive distribution services. Mr. Janssen is also a Board member of privately-held Financière de Tubize and Union Financière Boël, as well as Co-Founder and Chair of Trusted Family. Mr. Janssen is active in academics, as Vice-Chair of the International Advisory Board of the Solvay Brussels School of Economics and Management and on the advisory board of the INSEAD HGIBS. He brings expertise in finance, strategy, entrepreneurship, business management, planning and marketing. He has served as Solvay’s Vice President in strategy and M&A between 2019 and 2021, and prior to that, he was the US-based General Manager for North- and Latin America at Solvay’s Aroma Performance Global Business Unit.
 
Dr. Mary Meaney will serve as non-independent Director. She is currently a member of the Board of Directors and of the Audit Committee of Groupe Bruxelles Lambert SA. She also sits on the Board of Directors and the Remuneration Committee of Beamery, the privately-held talent management company. She is a member of the Board of Directors and of the Finance Committee of Imperial College, London.Dr. Meaney will bring expertise in Strategy, M&A, and change management, which she acquired over a 24-year career at McKinsey. She was a Senior Partner, served on the McKinsey Shareholders Council and led McKinsey’s global Organization practice.

Nadine Leslie will serve as independent Director and is based in the United States of America. She is currently a member of the Board of Directors of Provident Financial Services , as well as a Non-Executive Director of Seven Seas Water Corporation, a water and wastewater treatment multinational company. She also sits on the Board of Trustees of Hackensack Meridian Health Network and is active as strategic consultant for civil engineering firm T&M Associates. Over a 22-year career at Suez, Ms. Leslie held several leadership positions, the last one being Chief Executive Officer of Suez North America, until 2022. Previously she served as Executive Vice President Health & Safety.

More information:
Solvay Board of Directors
Source:

Solvay

03.11.2023

Lenzing implements performance program in response to lack of market recovery

  • Revenue of EUR 1.87 bn and EBITDA of EUR 219.1 mn in the first three quarters of 2023
  • Positive free cash flow of EUR 27.3 mn in the third quarter
  • Implementation of performance program focusing on positive free cash flow, strengthened sales and margin growth and sustainable cost excellence
  • Modernization and conversion of Indonesian site successfully completed – EU Ecolabel received

The anticipated recovery in markets relevant for the Lenzing Group has to date failed to materialize. The continued sharp increase in raw material and energy costs on the one hand and very subdued demand on the other had a negative impact on Lenzing’s business trends as well as on industry as a whole during the reporting period.

  • Revenue of EUR 1.87 bn and EBITDA of EUR 219.1 mn in the first three quarters of 2023
  • Positive free cash flow of EUR 27.3 mn in the third quarter
  • Implementation of performance program focusing on positive free cash flow, strengthened sales and margin growth and sustainable cost excellence
  • Modernization and conversion of Indonesian site successfully completed – EU Ecolabel received

The anticipated recovery in markets relevant for the Lenzing Group has to date failed to materialize. The continued sharp increase in raw material and energy costs on the one hand and very subdued demand on the other had a negative impact on Lenzing’s business trends as well as on industry as a whole during the reporting period.

Revenue in the first three quarters of 2023 decreased by 5.3 percent year-on-year to EUR 1.87 bn. This reduction was primarily due to lower fiber revenues, while pulp revenues were up. The earnings trend was mainly influenced by the market environment. As a consequence, earnings before interest, tax, depreciation and amortization (EBITDA) in the reporting period decreased by 16.7 percent year-on-year to EUR 219.1 mn. The net result after tax amounted to minus EUR 96.7 mn (compared with EUR 74.9 mn in the first three quarters of 2022), while earnings per share amounted to minus EUR 4.90 (compared with EUR 2.16 in the first three quarters of 2022).

Outlook
According to the IMF, a full return of the global economy to pre-pandemic growth rates appears increasingly out of reach in the coming quarters. In addition to the consequences of the pandemic and the ongoing war in Ukraine, growth is also being influenced by restrictive monetary policy and extreme weather events. The consequences of the renewed military confrontation in the Middle East are not yet foreseeable. Overall, the IMF warns of greater risks to global financial stability, and expects the growth rate to decrease to 3 percent this year and to 2.9 percent next year.

The currency environment is expected to remain volatile in the regions of relevance to Lenzing.

The general market environment is continuing to weigh on the consumer climate and on sentiment in the industries relevant to Lenzing.

In the trend-setting market for cotton, the current 2023/24 crop season is emerging as a further 1.7 mn tonnes of inventory build-up, following 1.8 mn tonnes of inventory build-up in the previous season.

Earnings visibility remains severely limited overall.

Lenzing is fully on track with the implementation of the reorganization and cost reduction program and on this basis is implementing a comprehensive performance program focused on positive free cash flow, strengthened sales and margin growth as well as sustainable cost excellence. The overarching goal is to position Lenzing even more strongly and to further increase its crisis resilience.

In structural terms, Lenzing continues to anticipate growth in demand for environmentally responsible fibers for the textile and clothing industry as well as the hygiene and medical sectors. As a consequence, Lenzing is very well positioned with its “Better Growth” strategy and plans to continue driving growth with specialty fibers as well as its sustainability goals, including the trans-formation from a linear to a circular economy model.

The successful implementation of the key projects in Thailand and Brazil as well as the investment projects in China and Indonesia will further strengthen Lenzing’s positioning in this respect.

Taking the aforementioned factors into consideration, the Lenzing Group continues to expect that EBITDA for the 2023 financial year will lie in a range between EUR 270 mn and EUR 330 mn.

Source:

Lenzing AG