From the Sector

India is a very important market for the German textile machinery industry, with an export of more than €255 million (+ 8 %) in 2017. Many German machinery builders have longstanding relations with Indian customers and quite a number of them also provide production plants and training centres in India. Not surprisingly, about 370 decision-makers and experts from the textile and nonwoven related industry attended the VDMA conference and B2B event called “German Technology meets Indian Textiles and Nonwovens” in Mumbai on 15-16 May 2018 (www.germantech-indiantextile.de).

According to a survey, both the event and German textile machinery engineering received the highest marks among the visitors. About 57 % of the visitors stated very good and 38 % good experience with machines and components from German suppliers. The performance and service promise as well as the high-quality standards have made German machine suppliers as most reliable partners in India and other countries. This positive result has by far not been reached by any other manufacturing nation from Europe or Asia. Asked for future processes, investments in technical textiles and/or nonwoven production seem to be the most favorite sectors in India. Around 74 % of the visitors plan to expand their production capacities with new machines and components whereas 26 % intend to replace old machinery by new machines and components. High productivity, after-sales service, end-product quality, low operating and acquisition costs are the decisive machine procurement criteria in this order. The investments plans are based on a positive business and investment outlook in India. 45 % of the visitors surveyed plan to invest more than 10 % within the next 12 months and 30 % up to 10 %. 25 % of the visitors expect a sales increase by more than 10 % for the next 12 months and 60 % anticipate a sales growth of up to 10%.

Considering this positive business climate and the high interest from the Indian industry, the 32 well-known VDMA members participated in the conference have good chances to offer the right technologies and to place new orders. The presented technology topics along the entire textile value chain will help the Indian industry to fulfill their expansion plans and to meet the challenges such as rising salary costs and shortage of labor in industrial regions. The major cutting-edge topics of the conference program were as follows:

•    Higher profits throughout the entire textile value chain
•    Energy, material, water and dyestuff savings for an environmentally friendly production
•    New applications such as technical textiles, nonwovens (e. g. hygiene products) or home textiles (e. g. terry towels)
•    Automation, industry 4.0, digital communication and smart factory solutions
•    Quality improvements e. g. with measurement and control systems
•    Lower investment costs in spinning preparation with integrated draw frames
•    New technologies to combine spinning and knitting
•    Smart textiles and added value products e. g. with embroidery machines

Whereas the event on 15-16 May 2018 focused on customers, a training session at the prestigious Veermata Jijabai Technological Institute VJTI in Mumbai on 17 May 2018 was addressed to future engineers. More than 220 textile manufacturing and mechanical engineering students followed the technical presentations. The VDMA's contribution to improve the education of future customers and partners was very much appreciated.

Exhibitors from eight countries have already confirmed to participate in the fair’s European Zone. They join an expected 500-plus total exhibitors from around the world. The 2018 edition of this biennial fair takes place from 4 – 6 September in halls N1 – N3 of the Shanghai New International Expo Centre.

While China retains its edge in terms of technical textiles and nonwovens production capabilities, in the eyes of Chinese buyers, European suppliers are still the leaders when it comes to technology and innovation. This was widely reported by European exhibitors at the previous edition in 2016 of Asia’s leading biennial trade event for the industry: Cinte Techtextil China.

“In the Chinese market, buyers want good quality products, so overseas companies, and products with recognised quality certifications, have a lot of potential,” Ms Ping Chen, General Manager of IBENA Shanghai Technical Textiles commented. “As a leading German company in the industry, our products are welcomed by many buyers at this fair. It is also important to be in the German Pavilion as this signals to buyers that we have quality products, and it attracts more attention.” Swiss firm Sanitized AG had the same experience. “As a Swiss company in the European Zone I believe it’s an advantage, as some local buyers have more confidence towards imported products,” Mr Steven Liu, Sales Manager said.

Other exhibitors commented on the long-term trends in the Chinese market. “There’s a definite shift to more high-quality machinery in China that isn’t affected by what’s happening in the overall economy. Moreover, there are opportunities for overseas suppliers as there is still a gap between us and what Chinese companies produce,” Dr Joachim Binnig, Vice President, Head of Development & Technology, Autefa Solutions Germany GmbH explained.

Mr Roger Zhang, Sales Manager for German firm J.H. Ziegler Nonwovens and New Materials commented: “Our products are mainly for high-end Chinese customers, such as BMW and Audi. The Chinese market has gradually matured, but the production capability for high-performance products which are energy efficient and eco-friendly is still developing, so there is a lot of space for overseas brands to develop here.”

European Zone highlights
This year’s European Zone will feature around 30 exhibitors from eight countries, including Austria, Belgium, the Czech Republic, France, Italy, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, the Czech Republic, Germany and Italy. Some of the exhibitor highlights in the European Zone include:

• Arkema (France): with brands including PMMA Altuglas, Rilsan, Pebax, Kynar PVDF and Bostik, they will present polymer resin for fibres and yarns, which apply to a wide range of applications, at the fair.
• Dakota Coating (Belgium): specialists in thermoplastic and thermosetting adhesives, their polymer products, based on polyethylene, polyolefin or mixtures, ethylene vinyl acetates, co-polyamides, polyurethanes and co-polyesters, are suitable for automotive, building, heat transfer and sound insulation uses.
• Lenzing Plastics (Austria): a new exhibitor at the fair, they are a leading manufacturer of polyolefin and fluoropolymer products, such as Thermoplast and PTFE products. One of their core competencies lies in the monoaxial stretching of films and filaments, and they offer special solutions in the fields of construction & insulation, medicine & hygiene, packaging and cables, as well as automotive and technical textiles. They will highlight their PROFILEN® PTFE product at the fair, and with its extreme durability and very smooth surface, it is highly valued in many niche applications in the technical and medical sectors.
• Protechnic (France): leading manufacturers of hot-melt adhesives and plastic printed films, they will showcase hot melt thermo-adhesive nets, webs and films at the fair.
• Trelleborg Coated Systems (Italy): another new exhibitor this edition, they produce high-performance, engineered coated fabrics. They offer a wide variety of substrates – from Kevlar® to silk – with a choice of weaving methods.

• Oerlikon integrates automation solutions for largescale plants in technology portfolio

Remscheid, Germany / Pfäffikon, Schwyz, Switzerland - Oerlikon announced today that it has acquired Germany-based AC-Automation GmbH & Co. KG, an engineering company specializing in large-scale plant automation solutions for the textile and packaging industries. The two companies have been partnering since the early 1980s. The integration of AC-Automation in Oerlikon expands the market-leading technology portfolio of its Manmade Fibers Segment. It also marks a milestone in Oerlikon’s ongoing quest to offer innovative, fully automated and digitally networked Industry solutions in the manmade fiber industry.

The 60 employees at AC-Automation’s Bernkastel-Kues and Augsburg locations will become part of Oerlikon’s Manmade Fibers Segment, which includes the leading brands Oerlikon Barmag and Oerlikon Neumag. The move will expand the Segment’s business model, adding another key core component to its current offering of production plants and technology solutions from melt to yarn, fibers, andnonwovens. Ultimately, Oerlikon will be able to offer customers a total solution from a single source, including automation logistics for packaging, high-bay storage, and other areas, which complement its current market-leading spinning and process technologies for the textile industry.

"We see our expanded overall offering as an Industry solution, reflecting the future of an even more efficient, digitized and profitable chemical fiber industry, especially for large-scale plants with daily production capacity of several hundred tons of polyester, nylon, polypropylene, or other manmade fibers,” explains Georg Stausberg, CEO of the Manmade Fibers Segment. Manmade fiber producers from China — the world’s most important market, generating more than 70 % of worldwide manmade fiber production — as well as companies from other fast-growing markets such as India, Turkey and the USA are also relying on automated and networked Industry total solutions.

"The acquisition and integration of AC-Automation’s automation solutions will provide new opportunities for our manmade fiber business. It enables the Segment to increasingly position itself as an Industry solution provider in combination with our own digitization solutions,” says Oerlikon Group CEO Dr. Roland Fischer. “As a leading provider of advanced materials, surface solutions and materials processing including the engineering and production of polymer plants, this acquisition marks another milestone in Oerlikon’s strategy to strengthen its businesses and thus sustain profitable growth.”

"After such a long partnership, we are excited to be able to benefit even more in the future as part of a global player in the textile industry. Our market access will further improve with the help of the Oerlikon
Group's sales and service network. For my employees, I am very pleased to be able to bring them into an international Group, in which there would be new opportunities and perspectives for them personally,”
said Rolf Gänz, AC-Automation’s Managing Director.

• Sustainable Precision Application Technology product for textile finishing boosts quality and productivity

Baldwin Technology Company Inc. is pleased to showcase the TexCoat G3 for the first time in Turkey during the ITM tradeshow, held in Istanbul from April 14 to 17, 2018.

This groundbreaking Precision Application Technology product—which will be demonstrated in hall 12 at booth 1213—enables a sustainable textil eand nonwoven finishing process, with low energy consumption, reduced water and chemistry waste, and substantialsavings of production time and costs. Launched in 2017, the innovative TexCoat G3 already has been installed at major textile finishing facilities worldwide, with proven positive results, including:

• Reduced water and chemistry usage, up to 50 percent
• Reduced total changeover time, up to 85 percent
• Reduced chemistry waste, up to 95 percent

“We are immensely proud to showcase the TexCoat G3 in Turkey, one of the leading markets for innovation and productivity in the textile industry,” said Simone Morellini, Baldwin Sales Manager-EMEAR. “We see great potential for our Precision Application Technology products in this region, and our goal is to help customers improve productivity, while saving valuable resources and contributing to a sustainable future.”
Baldwin’s Precision Application Technology product line provides customers with more flexibility, fewer production steps and increased uptime. With individual nozzle control and automatic volume adjustment, the TexCoat G3 ensuresprecise and uniform application in various process conditions and capacities.
Adjustments can be set in relation to cloth width, g/m2 and textile characteristics, allowing for complete control of the amount of water and chemistry applied.

Furthermore, the TexCoat G3 is versatile, managing a wide range of low-viscosity chemistries—such as water-repellent, softener and anti-microbial finishing—as well as single- and dual-sided applications, various textile characteristics and wet-on-wet applications.
Plus, it significantly reduces changeover times to less than five minutes, thanks to fully automatic flushing, and its mist containment covers encapsulate and prevent aerosols from escaping, securing a healthy working environment.

Leading apparel producer HanesBrands recently invested in 19 TexCoat G3 systems from Baldwin. “We have had outstanding results in productivity increase, and we can clearly see that this technology will make a great contribution to our future efficiency and sustainability savings,” said Mike Abbott, HanesBrands Global Director of Research and Innovation.

Spot Ltd., under the leadership of Cengiz Kahraman, has been representing Baldwin’s Precision Application Technology product line for the textile market in Turkey since 2016. The two companies collaborate closely and are committed to revolutionizing the textile finishing industry.

• A unique partnership enabled Lectra to test its revolutionary laser-cutting technology in a real production environment while delivering sustainable competitive advantage to the world’s leading supplier of airbag cushions.

Reaching the next level of growth and performance
Global Safety Textiles (GST) is the leading independent producer of airbag fabric and airbag cushions and supplier to the majority of airbag manufacturers.
Recognized for its long tradition of research and development, GST uses stateof- the-art technology to manufacture technical textiles for a variety of passive safety applications.
With operations on four continents, the German group has a workforce of more than 5,000.
The company’s worldwide operations and resources enable it to fulfill high volumes of orders promptly, providing the global automotive industry with a steady supply of airbag fabrics and cushions.To address GST’s main business challenges and meet their demanding manufacturing specifications, the group evaluated the performance of FocusQuantum OPW for one-piece-woven (OPW) airbag fabric together with Lectra in the pre-launch phase of the advanced laser airbag cutting solution. Following successful testing of Lectra’s advanced airbag cutting technology in a real production environment in Poland, the group then decided to acquire FocusQuantum OPW for implementation in China.

A one-off join testing collaboration on customer premise
The result of a mutually beneficial collaboration between Lectra and its longstanding customer, specifications for laser OPW airbag cutting solution FocusQuantum took into account GST’s exacting requirements. Once the development of FocusQuantum OPW was completed, both companies agreed to conduct joint
testing. “We came to the idea of joint testing when we visited Lectra’s R&D center in Bordeaux,” says Uwe Zimmermann, COO, GST.
“We discussed taking validation of our specifications to the next level. The idea came up to do it directly in a manufacturing environment.”
The extensive testing enabled GST’s experts to certify FocusQuantum as a proven technological platform for the mass production of airbags. “Process capability was a formal part of validations at GST Poland,” recalls Piotr Siwek. Manufacturing Engineering Manager. “It was verified and confirmed that FocusQuantum meets GST’s targets. The biggest improvement over the previous solution was the software, which we also helped Lectra develop. FocusQuantum Suite is one of the biggest advantages.”

Worldwide standartisation and rollout in China
As a result of the successful joint testing, GST decided to proceed with implementation in China. “Because GST aims to become a major player in Asia,
implementation of FocusQuantum in China is the next logical step for us,” explains Zimmermann. “Standardization of all our equipment worldwide is mandatory for us. That’s why we decided to work with a global player like Lectra.” With more than twice the productivity of the previous solution, FocusQuantum
has exceeded GST’s performance targets. The significantly higher level of process capability has both improved cutting quality and reduced the number
of defective cut parts.
“When we compare the unit output and unit cutting cost, we see a real improvement over the previous generation, so we are quite satisfied with the machine,” notes Sky Yang, General Manager, GST China. “It’s more reliable and productivity is significantly higher.”

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

Among the Aerospace promotions at Hexcel’s booth are carbon-reinforced 3D printed parts, made from Hexcel’s HexAM™ additive manufacturing technology that uses PEKK ultra-high performance polymers. Hexcel acquired this technology from Oxford Performance Materials in December 2017 to provide a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Aircraft engines benefit from a number of Hexcel technologies that will be promoted at JEC 2018, including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.
Another honeycomb innovation from Hexcel is Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs. An example of this technology will be on display at JEC 2018.

Rounding off the aircraft engine exhibits is a CTi fan blade for new generation lightweight turbofan engines from Rolls-Royce, manufactured from Hexcel’s HexPly® M91 high toughness and impact-resistant epoxy prepreg. Hexcel supplies HexPly® M91 as slit tape for the automated lay-up of the complex aerodynamic shape, with a constantly changing thickness across the blade length. The blade which is thinner and lighter than titanium fan blades is currently undergoing flight tests.
Hexcel’s HiTape® and HiMax™ dry carbon reinforcements that were developed for the automated lay-up of preforms for resin-infused aerospace structures will be promoted at the show. Two demonstrator parts, one made with HiMax™ and one with HiTape®, were both infused with HexFlow® RTM6 resin to demonstrate the potential benefits of an integrated design for aircraft skins, spars and stiffeners that meets OEM requirements for production rate increases and cost effectiveness.

Hexcel is also introducing its new range of HiFlow™ advanced liquid resins for aerospace structures manufactured by liquid molding technologies. Based on novel proprietary chemistry, the new resin family will enhance the performance of composites and ease processing when combined with HiTape® and HiMax™ dry carbon reinforcements. HiFlow™ HF610 is the first resin in the range.
Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil last October. Hexcel is relaunching the acquired products under the new HexBond™ brand name at JEC World. This fast-growing range of pastes, liquid shim and film adhesives has a wide spectrum of operating temperatures and is in qualification with a large number of aerospace and industrial OEMs.
In the Planet Aerospace area at JEC, Daher and Hexcel will jointly display an aircraft spar manufactured from HexPly® M56 prepreg. Hexcel’s Neil Parker and Daher R&T Director Dominique Bailly will give a joint presentation focusing on the materials used and the benefits for the finished part. The aircraft spar was designed and manufactured by Daher using Hexcel’s HexPly® M56 prepreg, in slit tape format, that was developed for automated deposition and out-of-autoclave curing. The spar was manufactured using only the vacuum bag process and demonstrates very low porosity levels. It is currently undergoing testing and validation through CORAC funding.

Hexcel’s Automotive promotions at JEC World 2018 include a new prepreg for composite leaf springs, HexPly® M901. In contrast to steel leaf springs used for suspension on vans, trucks and SUVs, newer composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. Hexcel’s HexPly® M901 prepreg raises the bar further, reducing mold cure time below 15 minutes, a 50% reduction compared to standard industrial prepregs. HexPly® M901 provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure. Hexcel’s expertise in manufacturing heavy weight glass UD prepregs, with fiber areal weights of up to 1600gsm, allows the company to offer a highly cost-competitive solution for the rapid manufacture of these safety critical components.

Hexcel is constantly seeking ways to ensure that customers obtain the maximum benefit from composites and has recently acquired state-of-the-art simulation technology that accurately predicts how HiMax™ non-crimp fabrics will drape in a mold. Working in collaboration with Nottingham University Hexcel has created a car seat shell, for which the material selection was optimized using this new drape simulation technology. Visitors to Hexcel’s stand at JEC will see an on-screen demonstration that illustrates how the simulation tool operates, predicting process and performance and ensuring that the optimum fabric architecture is quickly identified, reducing the need for expensive trial programs.
Hexcel’s HexMC®-i 2000 carbon fiber/epoxy molding compound has been successfully used by Audi to manufacture a high-performance engine cross brace. HexMC®-i is a fast curing high-performance molding material, suitable for the series production of complex shaped parts and providing excellent mechanical properties. The Audi cross brace covers the engine, providing torsional stiffness for enhanced drive dynamics.

Hexcel’s product offering for customers in the Marine industry has expanded following the acquisition of Formax in 2016 and Structil in 2017. At JEC World, Hexcel will promote its enhanced portfolio of carbon fibers, prepregs, woven reinforcements and multiaxial fabrics for builders of racing catamarans and luxury yachts.
Marine customers have supplied a number of parts for display to illustrate their expertise in manufacturing composite structures from Hexcel materials. These include part of a Diam 24 yacht mast made by ADH Inotec from Hexcel’s HexPly® M79 fast curing, low temperature cure prepreg. ADH Inotec purchased the prepreg from Composites Distribution, a Hexcel Official Distributor that also supplied HexPly® M9.6 prepreg to Lorima for the Outremer 5X catamaran mast section on display. Part of Lorima’s 42m wing mast for a multihull racing boat made with HexPly® prepreg from Vert-Le-Petit (formerly Structil) will complete the marine display.

Hexcel’s innovations for Wind Energy include Polyspeed® pultruded laminates for load-carrying elements in wind blades. These continuous cross-section profiles, made from a polyurethane matrix reinforced with unidirectional carbon fiber, provide consistently high mechanical properties, including high stiffness, fracture toughness and shear strength, combined with low weight and durability. Visitors to Hexcel’s stand will see a 2m diameter coil of pultruded carbon laminate that contains 255m of material in a single roll. This technology offers an economical way of reinforcing large-scale composite structures such as wind turbine blades. Hexcel will also launch its surface finishing prepreg for wind turbine blades and components. This provides a tough, durable and ready-to-paint blade surface without the use of gel coat and results in faster blade manufacture, saving time in production and reducing material costs. The benefits of the new surfacing prepreg will be demonstrated via a wind blade exhibit that has been given four different treatments across the blade surface. These include a section with gel coat, a section of standard prepreg without gel coat, and a section where a fleece has been added to improve surface quality but still requires preparation before painting due to pin holes. The final section made with new HexPly® XF2P surfacing prepreg has a ready-to-paint surface, straight from the mold, without any requirement for gel coat, fleece or finishing operations.

CHOMARAT, the composite reinforcement specialist group, is launching its multiaxial glass NCF for thermoplastic composites. The unique patented stitching yarn used can withstand processing temperatures to 400°C, making it an innovative industrial solution for thermoplastic composites and an alternative to the woven reinforcements used especially in the automotive sector. For the first time, CHOMARAT is also exhibiting a unidirectional carbon NCF reinforcement that is adapted to the productivity and performance requirements in the wind energy sector.

AN INNOVATIVE INDUSTRIAL SOLUTION TO REINFORCE AUTOMOTIVE THERMOPLASTICS
Thanks to a unique patented stitching yarn, the glass NCF reinforcement (G-PLY™) developed by CHOMARAT offers new possibilities in thermoplastic RTM and organosheet processes. “This is an especially innovative solution, utilizing stitching yarns that are compatible with processing temperatures to 400°C. These multiaxials improve the performance and provide a lot of construction freedom in terms of fibre orientation. These new design possibilities contribute to structural optimization. The quest for more lightweight vehicles, shorter cycle times and lower cost is a major issue for all builders,” explains CHOMARAT Automotive Market Manager Francisco De Oliveira.
This new heat-stable G-PLY™ reinforcement can withstand very high processing temperatures without deformation and provides optimal mechanical performance.

A CARBON UD TO REINFORCE EXTRA-THICK WIND TURBINE STRUCTURES
For the first time, CHOMARAT is exhibiting an infusion-moulded laminate made with 150 plies of its new unidirectional carbon C-PLY™. This 600g/m², high-permeability NCF can be used to create extra-thick structures, in particular the wind-turbine blade stiffeners, or spar caps. “Cost reduction is the challenge in the wind energy industry. Increasing the blade length by incorporating carbon stiffeners increases power, and so it also lowers the cost of the energy,” says CHOMARAT Wind Energy Market Manager Raphaël PLEYNET. The carbon UD developed by CHOMARAT provides a solution to achieve the goal to optimize the weight/power ratio. The UD’s high permeability reduces cycle times and lowers the blade production costs.

Professor Sung Ha from the University of Hanyang will give a conference on composite challenges in the wind energy sector at 11:30 am on Wednesday, 7 March 2018 at JEC World.
Established in 1898, CHOMARAT is an international industrial textile group, involved in three businesses: Composites Reinforcements, Construction Reinforcements, Coatings & Films–Textiles. The privately held company operates in France, Tunisia, the United States and China to service its global customers.
CHOMARAT leads a strong innovation strategy, rising to challenges, developing materials for the future. Hence, the Group invests in new technologies and enters into collaborative research programs with universities and technical centers worldwide.
CHOMARAT offers strong technical know-how and mastery of complex technologies in fields ranging from automotive, aerospace, sports, energy, marine, construction, and also in markets requiring creativity and expertise, like luxury goods.

Image processing system allows cost savings of more than 2,000 euros per year and weaving machine

MSc Marco Saggiomo from the Institut für Textiltechnik (ITA) and graduate engineer Marcin Kopaczka from the Institute of Imaging & Computer Vision of RWTH Aachen University (LfB) developed an image processing system for weaving machines that provides comprehensive benefits for woven fabric producers. The image processing system enables the weaving machine to detect faulty pickings autonomously. The application of the image processing system leads to cost savings of at least 2,210 euros per year for each weaving machine in comparison to manual faulty picking repairs.

The researchers won the “Best Student Paper Award” within the framework of the 7th International Conference on Pattern Recognition Applications and Methods (ICPRAM) for their joint paper on “Fully Automatic Faulty Weft Thread Detection using a Camera System and Feature-based Pattern Recognition”. The award confirms the success of the co-operation of both institutes, ITA and LfB, which will be continued in future research projects.

The image processing system is part of the doctoral thesis of Marco Saggiomo. Marcin Kopaczka supported ITA with the development of the image processing algorithm.
The joint paper is based on the successfully concluded project WeftAlert within the framework of the German Federation of Industrial Research Associations. Further results of the WeftAlert project include the extension of the state of the art of image-based process optimisation of air-jet weaving, excellent outcomes in image processing as well as the validation of image processing systems in laboratory and industrial environments.

Pilatus is displaying the PC-24 at the European Business Aviation Convention and Exhibition, taking place in Geneva on May 22-24. This highly versatile jet is able to take off and land on very short runways and unpaved strips due in part to the composite-intensive structure, which makes great use of Hexcel’s composite materials and adhesive.

Hexcel’s HexPly® 8552 woven prepreg in carbon and glass variants is used to manufacture a number of the aircraft components including the belly fairing, which is the largest composite structure on the aircraft. HexPly® 8552 is one of Hexcel’s most successful and widely used prepregs for aircraft programs including commercial aircraft and fighter jets. Hexcel’s Redux® 319 epoxy film adhesive is also used for bonding the composite structures. The PC-24 is in the final stages of its certification program following the first flight of the third and final test aircraft on March 6 2017. The aircraft is scheduled for certification and entry into service in the 4th quarter 2017. Pilatus has so far secured 84 orders for the PC-24, which equates to three years of production.

The world's leading trade fair for technical textiles, techtextil, will be held in Frankfurt from 9 to 12 May 2017. It is regarded as one of the leading international trade fairs for technical textiles and nonwovens, where decision-makers, developers and purchasers of the textile industry meet for exchange.
imat-uve will once again be exhibiting with its services around the design, development and testing of materials and textiles. At the booth G80 in hall 3.0, the visitors will find themselves in the middle of the imat-uve creative lab where the company presents itself with current projects. Among other things, this is a selection of innovative textile materials from the company's material library, which are developed further for specific requirements. Research projects show how textile innovations, for example at the car seat, ensure sustainable production and improved seating comfort.