From the Sector

The ReHubs initiative brings together key European and world players to solve the European textile waste problem by transforming “waste” into a resource, and to boost textile circular business model at large scale.

This collaboration is set to turn the societal textile waste issue into a business opportunity and to fulfil the EU ambitions of the Green Deal, of the mandatory texile waste collection by end 2024 and the transition into Circular Economy.

In 2020 EURATEX launched the ReHubs initiative to promote collaboration across the extended textile value chain and considering all perspectives on chemicals, fibers making, textiles making, garments production, retail and distribution, textiles waste collection, sorting and recycling.

In June 2022 ReHubs completes a Techno Economic master Study (TES) which researches critical information on the feedstock (textile waste) data, on technology, organizational and financial needs to recycle 2.5 million tons of textile waste by 2030 and to effectively launch the ReHubs.

EURATEX’s ReHubs initiative plans to pursue fiber-to-fiber recycling for 2.5 million tons of textile waste by 2030
According ReHubs Techno Economic Master Study (TES), the textile recycling industry could generate in Europe around 15,000 direct new jobs by 2030, and increase need for nearshoring and reshoring of textile manufacturing.

The textile recycling industry in Europe could reach economic, social and environmental benefits for €3.5 billion to €4.5 billion by 2030
“Transform Waste into Feedstock” announced as first project supported by the ReHubs, and aiming at building up a first 50,000 tons capacity facility by 2024.

Europe has a 7-7.5 million tons textile waste problem, of which only 30-35% is collected today.  

Based on the ambitious European Waste law, all EU Member States must separately collect the textile waste in 2 years and half. While some countries are designing schemes to face the waste collection challenge, currently no large-scale plan exist to process the waste.

The largest source of textile waste (85%) comes from private households and approximately 99% of the textile waste was made using virgin fibers.

Euratex  assesses that to reach a fiber-to-fiber recycling rate of around 18 to 26 percent by 2030, a capital expenditure investment in the range of 6 billion € to 7 billion € will be needed, particularly to scale up sufficient sorting and processing infrastructure. The economic, social, and environmental value which could be realized, potentially total an annual impact of €3.5-4.5 billion by 2030.

Once matured and scaled, the textile recycling industry could become a profitable industry with a total market size of 6-8 billion € and around 15,000 direct new jobs by 2030.

Next steps of the ReHubs initiative

• A European textile recycling roadmap proposing Objectives and Key Results to recycle fiber-to-fiber 2.5 million of textile waste by 2030
• A leading collaboration hub with large players and SMEs from across an extended European textile recycling value chain
• A first concrete portfolio of 4 launching projects:
  - Transform textile waste into feedstock
  - Increase the adoption of mechanically recycled fibers in the value chain
  - Expand capacity by solving technical challenges for thermo-mechanical textiles recycling
  - Create capsule collection with post-consumer recycled products

The 1^st project addresses current sorting technologies which have limits to identify materials with sufficient accuracy for the subsequent circular recycling processes. The “Transform Waste into Feedstock” project will focus on further developing and scaling such sorting technologies. The project group led by Texaid AG aims on building up a first 50,000 tons facility by the end 2024.

As of 30 May 2022, EREMA Group GmbH acquired 19.8 percent of plasticpreneur® gmbh. plasticpreneur® is an Austrian start-up company founded two years ago that manufactures at its production site in Klagenfurt recycling solutions for plastic waste that are mobile and can be operated without prior knowledge. The machine portfolio covers the recycling process and the production of new end-products. Due to it´s wide range of applications, it is in demand both in the Global South and in industrialised countries.

In the two years since the company was founded, plasticpreneur® has already sold 330 machines to customers in over 70 countries on all continents. In addition, they have made over 750 application-specific moulds, many of them custom-built to comply with individual customer specifications.

While plastics recycling has gained enormous momentum in the industrialised countries, more remote and poorer regions of the world have hardly benefited from high-tech solutions for industrial recycling processes so far. They are held back by a lack of infrastructure and know-how. That is why waste is often incinerated or disposed of in landfills, rivers and the surrounding environment. "Our mission - Another life for plastic, because we care - is also aimed at supporting these regions with solutions for plastic recycling, and with plasticpreneur® we have found the ideal partner for this," says Manfred Hackl, CEO EREMA Group.

The start-up company's machines can process HDPE, PP, PS, LDPE, PLA, AB and TPU separately. Their product range includes a shredder, injection moulding unit, extruder unit for the production of end products, air filters as well as custom-built moulds. "For our machines to be used in regions with little infrastructure, they must be easy to operate without prior knowledge. The fact that we also develop end-product solutions needed locally makes our range of services particularly attractive here," explains Sören Lex, CEO and co-founder of plasticpreneur®. As soon as recycling also becomes a source of income for the operators, they become entrepreneurs. That explains the name of the start-up, a word created from "plastic" and "entrepreneur". plasticpreneur® customers in these countries include e.g. social enterprises and operators of refugee camps, where everyday consumer goods - from clothes pegs and school supplies to toys and fence posts - are produced and sold using plastic waste. This means that the added value stays local.

The demand for plasticpreneur® machines is also increasing in industrialised countries. On the one hand by educational institutions and organisations that use them to raise awareness of the need for a circular economy in workshops and to give pupils as well as adults a better understanding of plastic recycling. On the other hand by customers who are developing new end-products for plastic waste together with plasticpreneur®. Because the machines are so easy to operate they enable a low-theshold use of recycled plastics in product development processes, starting from generating prototypes to launchin small series production. Small companies, product designers and developers therefore are another steadily growing customer segment.

The sustainable collaboration and innovation between Indorama Ventures (IVL), Auping and TWE Group presented a certified cradle to cradle process for mattress components across nonwoven applications, at Techtextil, Frankfurt, 21st to 24th June 2022.

Using circular research and design, the industry partnership between IVL Mullagh (Ireland), Auping and TWE Group has resulted in a perpetual, sustainable economic business model, for manufacturers globally. The inclusion of safe raw materials within mattress manufacturing allows the materials to be easily disassembled at the product’s end of use in order to be further reused as same components or recycled into new raw material at the same quality level, to enable versatile textile applications.

Designed for disassembly to optimize the use of existing resources, reduce carbon footprint and support customer objectives all along their customers’ supply chain. This circular industry collaboration begins with design, where the mattress is constructed using only two different base materials, 100% PET polyester textiles and steel wire pocket springs connected with Niaga®️, a non toxic reversible adhesive, making the mattress easy to disassemble and recover.

IVL, Auping and TWE’s shared vision for a better world is demonstrated through their connected and innovative circularity that helps to close the loop. Auping collects, sorts and separates the collected fabrics, which then go to IVL Mullagh for processing, melting and extrusion to form polyester staple fiber. These staple fibers are then converted by TWE Group into nonwovens for use in Auping’s Evolve mattress, a fully circular mattress. Following the end of mattress use, the material recovery process simply starts again.

Auping estimates that annually more than 40 million mattresses are disposed of in Europe alone, the majority of which are incinerated. Their take back system in the Netherlands ensures that when their new mattress is delivered, the old mattress is retrieved and recycled, irrespective of the brand, ensuring existing materials are continually optimized, diverted from landfill and kept in use to achieve a circular economy.

• Target markets: automotive, furnishings, sports and technical apparel
• New product entry: radipeople® line of personal protective equipment

RadiciGroup is at Techtextil 2022, the leading European trade fair for technical textiles, taking place in Frankfurt am Main, Germany, from 21 to 24 June. On display in the RadiciGroup exhibition area are the Group’s latest products for the automotive, furnishings and apparel markets: from nylon and polyester yarn, including biosource and recycled lines, to nonwovens and the new radipeople® line of personal protective equipment (PPE).

Indeed, at Techtextil, RadiciGroup is showcasing RENYCLE®, a yarn obtained from recycled nylon; REPETABLE®, a polyester yarn from post-consumer recycled plastic bottles; RESPUNSIBLE®, a nonwoven fabric from recycled polypropylene; and BIOFEEL®, a brand identifying a yarn line obtained from renewable sources of both nylon and polyester.

Moreover, RadiciGroup is participating in a forum organized by the Technical Textiles Section of Sistema Moda Italia in collaboration with the Italian Space Agency (ICE) (Hall 12.1 – Stand C58), with the goal of introducing product innovations not only coming from a single manufacturer, but also from an innovative synergistic approach all along the supply chain, from raw materials to finished products. An example of this synergistic collaboration is the “Mars Spacesuit”, recently tested in the USA by analogue astronauts as part of a space medicine project designed to measure the vital signs of future astronauts and develop technologies to support the simulation of life in space and planetary environments. RadiciGroup teamed up with major Italian textile companies and supplied the materials to make the suits for the six analogue astronauts participating in the mission and coordinated the development of the technologies needed to create the technicalwear for use in extreme environmental conditions.

Monforts is introducing a range of modular upgrades that can be added to existing finishing lines already in production.

The Monforts universal Energy Tower – a flexible, free-standing air/air heat exchanger for recovering the heat from the exhaust air flow of thermal processes – can result in a 30% reduction in the energy consumed by a line, depending on the exhaust air volume and operating temperature.

A Monforts Eco Booster, completely integrated into the chamber design of the Montex stenter, is another retrofitting option. As a single state-of-the-art heat recovery system with automatic cleaning, it can be added to existing ranges. For ranges of up to eight chambers only one module is necessary to achieve significant energy savings.

On an eight-chamber stenter with an operating width of two metres carrying out a fixing process on a 150gsm woven fabric, for example, the energy savings have been calculated to be 35% over an annual schedule of 6,000 operating hours.

In addition, the Eco Booster consumes only minimal amounts of water during the cleaning cycle and the entire process is controlled and monitored automatically.

The Matex Eco Applicator is an alternative to the conventional padding process for energy-conscious finishing and achieving considerable savings in the energy required for drying treated fabrics. The precise amount of chemical can be applied to the fabric and with less residual moisture after application of only approximately 35% so that less drying capacity is required in the stenter, which leads to huge energy savings.

Finishes can be evenly applied on either or both sides of the fabric, and two separate treatments can be applied to front and back. This makes the unit ideal for the production of, for example, double-performance hydrophobic/hydrophilic fabrics for professional clothing, as well as the over dyeing or finishing of denim fabrics.

• Lenzing continues to focus on partnering for systemic change

• Clear commitment to improving the environmental footprint of textile and nonwoven industries

• Global initiative TfS promotes sustainable design of global supply chains

The Lenzing Group, a world-leading provider of wood-based specialty fibers for the global textile and nonwoven industries, has joined the chemical industry’s sustainable supply chain initiative, Together for Sustainability (TfS). Together with Lenzing, numerous internationally active chemical companies have joined the initiative. Their common goal is to make the global supply chains of the chemical industry sustainable.

“Joining the TfS initiative is another clear commitment to improving the environmental footprint of the global textile and nonwoven industries and proves that sustainability is taken very seriously at Lenzing – so much so that sustainability is at the heart of our business strategy. So much so, it sits at the core of the Group’s business strategy. The industry needs innovation in order to transition from linear to circular ways of working, and Lenzing will continue to partner across the supply chain to bring this vision to life,” says Robert van de Kerkhof, Chief Commercial Officer Fiber at Lenzing.

Partnering for systemic change
Complex global sustainability challenges require a collaborative approach to developing systemic solutions, involving many stakeholder groups. In order to make the global textile and nonwovens industries more sustainable and bring about systemic change, Lenzing has therefore also been building on partnerships within its sustainability strategy “Naturally Positive” for many years.

“I am very proud to welcome Lenzing to the TfS family, bringing the TfS membership to 37 companies. Together and with our strategic partners we continue to expand our reach and increase our impact on the sustainability performance in chemical supply chains. Given the regulatory landscape, climate challenges and market conditions, the need for sustainable businesses only intensifies. TfS is the crucial enabler to make supply chains and businesses at large more sustainable and contribute to developing a better world”, says TfS President Bertrand Conquéret.

The global TfS initiative follows the principles of the UN Global Compact and Responsible Care.

This year, Intertextile Shanghai Home Textiles again joins forces with NellyRodi™, the renowned French agency for international forecasting, to present the design theme for 2023 – ‘ALIVE’ – together with three trends: HUMAN CAPITAL, ROUSING COMMITMENT and UNREAL REALITIES.

Nature is a keyword in HUMAN CAPITAL
This direction reflects how people want to reconnect with the environment by choosing a local approach, short supply chains, raw and natural materials, and traditional techniques. For instance, 100% plant-based materials, as well as metalised fringed jacquards and gold yarns are used to illustrate this concept.

Inspired by everyday basics and daily essentials, the trend uses a soft, luminous white palette mingled with muted and amber shades of vegetal dyes. Designs also incorporate figurative hand-drawings, archaic bestiary, stylised wildflowers and geometric patterns.

ROUSING COMMITMENT celebrates creative self-expression
The trend combines a lively play of mix-matching patterns and colours. This embraces the integration of neutral shades through touches of metallic silver and fluorescent colours to represent the urban life.

Foamback and other fabrics influenced by sports materials, as well as extravagant jacquards, silicon embossing and bouclé fabrics draw out feel-good factor of the theme. Prints using modern twists on traditional patterns, lettering plays, exuberant florals and bold geometrics, also deliver the desire to live freely by sharing joy and happiness with others.

The fantasy of UNREAL REALITIES
In order to push the limits of imagination, science and technology, consumers tap into digital realms to connect with other realities, augmented worlds and futurist utopias that draw out the potential of today’s technology. Metalised rainbow colours highlight the magic and wonder under this virtual reality theme, while surrealistic photoprint shapes, misty landscapes, blurry effects and fantastical nature adds a futuristic touch.

The theme adopts iridescent gleam of semi-transparent voiles, muslins, recycled synthetics and added pearly or glazed aspects. Soft, light meshes, honeycombed or blistered surfaces and cloudy seersuckers elevate the textures in the fabrics.

The trends are decided by a committee led by the NellyRodi™ Agency (France) and formed by top forecasters including Mr Vincent Grégoire (France), the agency’s Consumer Trends and Insights Director; Mr Shen Lei (China), Founder and Chief of Interior Architects Design; and Ms Tracy Jen (Taiwan, China), the Host of ‘Eremito’; as well as Ms Sakina M’sa, the beloved French fashion designer and entrepreneur.

In order to integrate exhibitor and industry resources more effectively, the organisers of Intertextile Shanghai Home Textiles have announced that the Spring and Autumn editions will be merged this year. The two fairs will now be held concurrently from 15 – 17 August 2022 at the National Exhibition and Convention Center.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, along with its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will be participating in the Techtextil exhibition in Frankfurt, Germany from the 21st till the 24th of June 2022.

On display will be SHIMA SEIKI’s latest innovation in flat knitting technology as applied to the field of technical textiles—a prototype weft knitting machine capable of multi-axial yarn insertion. Fabrics produced on this machine use inlay technique for the production of hybrid textiles that combine the stretch characteristics of knitted fabrics with the stability of woven textiles, suited to various technical applications. To this, warp yarn is inserted to further expand its capability to produce 3D-shaped carbon fiber and composite preforms directly on the machine. This is made possible by taking advantage of the fact that flat knitting as a textile production method is capable of producing end products that are shaped-to-form and with added thickness. Compared to current methods of preform production, savings in post-processing time, material, labor and associated costs are immense, realizing efficient and sustainable production. SHIMA SEIKI’s own yarn unwinding technology is also used for optimum yarn feed and tension for use with technical yarns that are otherwise difficult to knit. Industrial textile samples knit on the multi-axial machine will also be available for examination on-site.

SHIMA SEIKI's SDS®-ONE APEX4 3D design system will be available for demonstrations as well. Of particular interest should be its ultra-realistic simulation capability that realizes Virtual Sampling. When countless variations must be evaluated before arriving at a final design, virtual product samples can be used to streamline the decision-making process by minimizing the enormous amount of time, cost and material normally associated with producing actual samples for each variation. When approved, the same data can be converted to machine data for immediate knitting, significantly reducing lead times.

ITM 2022, the first major international textile machinery exhibition to be held in the world after a 3-year hiatus during the pandemic process, is getting ready to open its doors. Bringing the leading brands of textile technologies together in Istanbul, ITM 2022 will host world launches and numerous collaborations for 5 days.

ITM 2022- International Textile Machinery Exhibition, organized in partnership with Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc, will open its doors at Tüyap Fair and Congress Center between 14-18 June. For ITM 2022, which will be held in 12 halls on an area of 120,000 m2; hums of 1280 participating companies from more than 40 countries continues. Tüyap Fairground, where thousands of people sweat for stand setups, is getting ready for the big meeting. ITM 2022, where all halls have reached 100% occupancy rate and 1280 exhibitor companies are located, will also attract attention with the stand areas and machine parks that the manufacturers have enlarged compared to the previous exhibitions.

Companies will showcase their state-of-the-art technologies for the first time at ITM 2022
Many companies that focus on product development and new productions under pandemic conditions will have the opportunity to introduce their products to their customers for the first time in 3 years at the ITM 2022 Exhibition. Company owners, managers, employees and sector representatives visiting the exhibition will have the opportunity to see the latest technological innovations for the first time and witness their world launches.

Sector representatives, who will open up new horizons in their minds about textile technologies, will sign new products by transforming the extraordinary and original ideas that they have obtained at the ITM 2022 Exhibition into design. Participating companies will also update their machines in line with the demands and needs from the sector representatives and lead the development of new technologies.

Significant Contribution to Exports Aimed with Machine Sales and New Investment Decisions
The textile industry, which is among the locomotive sectors in Turkey's exports, has made a significant contribution to the Turkish economy, especially with the performance increase it has achieved during the pandemic period. Having achieved an increase of up to 40 percent in its exports of textiles and raw materials, Turkey also managed to increase its exports of medical textiles, technical textiles and home textiles. The industry will further increase this success with the collaborations to be realized at ITM 2022. The textile machinery industry will gain great momentum with the machinery sales and new investment decisions to be made at the exhibition.

ITM 2022, which will be attended by many domestic and foreign companies and visited by thousands of people, will be an organization where both domestic and foreign companies will make sales amounting to millions of Euros and many business connections will be realized.

Intense Interest from Trade Delegations
Trade delegations from dozens of countries are requesting to attend the ITM 2022 Exhibition, which is included in the ‘Domestic Organizations Covered by State Incentives’ list by the Ministry of Commerce. Bangladesh, India, Iran, Serbia, Czech Republic, Pakistan, Indonesia, Ethiopia, Malaysia, Mexico, Egypt and Vietnam are among the countries that requested procurement delegations. The intense application of visitors to consulates and commercial attachés from all over the world clearly reveals that ITM 2020 will host a large number of visitors.

ITM 2022 Exhibition Prepares to Break Both Exhibitor and Visitor Records
Company owners, company representatives and visitors left the 2018 edition of the ITM Exhibition very satisfied. ITM 2018 Exhibition, attended by 1150 companies and company representatives from 64 countries and visited by approximately 60 thousand people from 94 countries made a significant contribution to the export records of the textile industry that year. At the ITM 2022; It is getting ready to break new records with the number of participants and visitors coming from Turkey and abroad.

Technical Textiles and Nonwovens Industry Will Meet at HIGHTEX 2022 Exhibition
On the other hand, HIGHTEX 2022 Exhibition, which will be held simultaneously with the ITM 2022 Exhibition, will be an exhibition where Nonwoven products, raw materials used in their production and the state-of-the-art technologies will be exhibited. HIGHTEX 2022 Exhibition, which is the first and only in its field in Turkey, will host a record number of participants and visitors in parallel with the increase in demand for technical textiles. At the HIGHTEX 2022 Exhibition, companies operating in many sectors, from medical textiles to hygienic textiles, from agricultural textiles to geotextiles, will exhibit their latest products and production technologies. Nonwoven manufacturers will come together with the global players of the sector and have the opportunity to both invest in technology and introduce their newest products.

adidas drops an all-new sportswear capsule. The collection is inspired by the way the next generation continues to turn tradition on its head with how they move through the world, opting for a fresh comfort-first mindset and rejecting old-world pressures.

To get closer to this mindset, adidas reached out to uncover more about the rise of the cosy fit. Nine in ten believe the clothes they wear impact how mentally comfortable they feel, and over three quarters say they are more likely to thrive in multiple aspects of life when rooted in a true feeling of comfort. With this in mind, adidas’ sportswear capsule is built for next-level comfort both at home and on the streets with a full collection of casual, stylish fits for both men and women.

Fronted by a raft of next generation trailblazers, including global award-winning actress Hoyeon, US gymnast sensation Nia Dennis, American football superstar Tua Tagavailoa, and Chinese national sprinting champion Xie Zhenye, the campaign reveals how choosing comfort in mind and body has given them confidence, more internal headspace, and the ability to embrace any challenges within their journey of progress.

Key looks include:

• Women’s Rib Dress: A straight minimalist silhouette in block-colour black, which can be worn individually or layered for a more expressive look. Features a twister racerback detail, crew neck cut, and side split hem for an added edge
• Men’s Classic Tee paired with Woven Pants and Coach Jacket: Paying homage to sport heritage, the woven pants and coach jacket offer an oversized and relaxed fit, in a neutral but bold colour pairing. The ribbed crewneck tee complements the look with a stylish mixture of textures
• Women’s Oversized Hoodie with Rib Crop Top and Biker Shorts: A muted pastel toned top designed with a cropped hem and matching shorts in soft rib knit material, creating an effortless fresh but cosy look which can be easily layered with a slouchy oversized hoodie
• Men’s Fleece Hoodie layered over Oversized Tee and Fleece Shorts: Relaxed fit basic tee with a vibrant red block logo paired with a boxy hooded jumper which boasts an oversized aesthetic. Complemented by baggy fleece-lined shorts ensures comfort through every move and moment