From the Sector

• Die schnellste Textil-Digitaldruckmaschine der Welt, die EFI Reggiani BOLT, liefert nun noch höhere Bildqualität

Dank Verbesserungen bei Hardware und Software der Ultrahochgeschwindigkeits-Inkjet-Druckmaschine gehören die Herausforderungen der Single-Pass-Bildverarbeitung unter anderem aufgrund weicherer Volltöne und verbesserter Druckhomogenität der Vergangenheit an

Electronics For Imaging, Inc. hat die schnellste Textil-Digitaldruckmaschine der Welt, die EFI™ Reggiani BOLT, jetzt noch besser gemacht. Bei dem Upgrade handelt es sich um eine Kombination aus Verbesserungen bei Hardware und Software, mit deren Hilfe die Artefaktbildung minimiert wird, indem der Ausfall einzelner Düsen, der im Laufe der Zeit auftreten kann, kompensiert und für eine höhere Homogenität gesorgt wird, wodurch weichere Volltöne möglich sind. Das Upgrade liefert nicht nur eine höhere Qualität und sanftere Gradienten, sondern beschleunigt auch das Auswechseln der Druckköpfe und sorgt für eine drastische Erhöhung der Dateiverarbeitungsgeschwindigkeit um bis zu 200 % für große, komplexe Dateien.
 
Die Erstellung spezieller Farbprofile mit der neuesten Version des digitalen EFI Fiery®  Front-Ends BT-1000, mit dem der Drucker betrieben wird, liefert bessere, intensivere Farbtöne und verbessert die Möglichkeit zum Abstimmen auf bestehende, im digitalen Textildruck übliche Farbprofile.
 
Diese Verbesserungen sind ein wichtiger Schritt, um die Präsenz des Digitaldrucks in der Branche weiter zu stärken und umweltfreundlichere, nachhaltigere Inkjet-Technologien als Ersatz für analoge Farbgebungsprozesse in den Vordergrund zu stellen, welche die Textilherstellung zur zweitgrößten umweltbelastenden Industrie der Welt machen.
 
“Durch seine in der Branche unangefochtene Geschwindigkeit und die nun noch höhere Druckqualität kann die EFI Reggiani BOLT dazu beitragen, eine Revolution im Textildruck zu entfachen und die Verschiebung der Produktion hin zur Digitaltechnologie zu verstärken, da sich die Investition bei hochvolumigen Aufträgen aufgrund des überlegenden Durchsatzes sowie der unerreichten Zuverlässigkeit und Betriebszeit besonders schnell bezahlt macht”, so Adele Genoni, EFI Reggiani Senior Vice President und General Manager. “Durch die neuen Verbesserungen an der BOLT – und deren Fähigkeit, mit einer Rekordgeschwindigkeit von 90 Metern pro Minute in extrem hoher Qualität auf einer Vielzahl von Designs und Stoffarten zu drucken – liegen Analog- und Digitaldruck in der Textilbranche wirtschaftlich gesehen näher beieinander als je zuvor. Mit dieser branchenführenden, qualitativ hochwertigen und durchsatzstarken Lösung für den digitalen Textildruck ist die Single-Pass-Technologie nun attraktiver denn je.”
 
Die Chancen stehen recht gut, dass die 1,8 Meter breite Single-Pass-Druckmaschine – die als erster Textil-Digitaldrucker den Printing United Alliance InterTech™ Award für Innovationen im Bereich der modernen Drucktechnologie erhielt – die Transformation der Branche stark beeinflussen wird. Mit den bisher in Betrieb befindlichen Exemplaren hat EFI Reggiani BOLT schon jetzt weltweit mehr als 50 Millionen laufende Meter an Textilien bedruckt.
 
Schnellere Verarbeitung und qualitativ hochwertigerer Druck
Das Upgrade der EFI Reggiani BOLT ist jetzt weltweit verfügbar und beinhaltet für eine bessere Gesamtleistung, Druckqualität, Homogenität und Bedienerfreundlichkeit unter anderem die folgenden Verbesserungen bei Hardware und Software.

The European textile and apparel industry welcomes the organisation of the EU-US Summit in Brussels, and hopes that political leaders will launch a new era of closer cooperation across the Atlantic. Both the Covid19 pandemic and recent geopolitical tensions call for global solutions; the EU and the US should take a leadership role in developing that new global framework.

EU-US trade in textiles and apparel have dropped by nearly 20% in 2020 (just under €6 bln), while imports from other countries, in particular China, have increased spectacularly (+45% into the EU). At the same time, global supply chains came under pressure, and access to certain raw materials for the industry became difficult and costly.

Against this background, EURATEX does not call for protectionism, but a better functioning of global supply chains, with common rules which are applied by all. The EU and US authorities should put their full influence to establish a level playing field for our industry across the globe, promoting environmental and social standards. Sustainable and circular textiles should become the norm, thus contributing to a greener planet and creating high quality jobs.  

At bilateral level, the EU and US should resume their work on mutual recognition of standards and certification procedures, thus saving considerable costs for our companies while maintaining the highest safety standards. Custom procedures can be simplified on both sides, and joint research, e.g. in smart textiles, should be promoted.

EURATEX welcomes the recent progress in provisionally eliminating additional duties on several American and European products due to the Airbus-Boeing trade dispute. It is a very positive sign that EURATEX would like to highlight in a particularly difficult context for the textile and clothing industry at European, American and even global levels. EURATEX calls on both US and EU institutions to eliminate such duties permanently and build on a common positive agenda for the benefit of EU and US companies and consumers.

EURATEX Director General Dirk Vantyghem commented: "Both the EU and US are developing a new business model for their industry. We should make sure these models can complement and reinforce each other. If not, we risk losing global leadership, not just in terms of market share but also in terms of values and standards."

ISKO presents 2022 Collection Vol. 2, a forward-thinking collection with responsibility, creativity, authenticity and comfort engrained into every fiber of every fabric to provide solutions for all denim lovers’ dreams and needs across the world.

2022 Collection Vol. 2 has been created using the company’s principles of Responsible Innovation™ and is made entirely with ISKO’s revolutionary R-TWO™ technology. Certified to Textile Exchange credentials, the R-TWO™ fabrics in 2022 Collection Vol. 2 ensure complete traceability of raw materials from field to final product. Using a blend of reused and recycled materials, they help decrease the usage of raw materials and improve sourcing efficiency, while preserving all the properties and benefits of each product. R-TWO offers a simple way for companies to switch from virgin to reused and recycled materials for all products in ISKO’s collection.

The 2022 Collection Vol. 2 further explores the four lifestyles introduced in ISKO’s Vol. 1 collection -Denim Lovers, Simplify, ISKO™ Comfy and Euphoria – building on a collection to provide further inspiration for designers and brands to suit different vibes and moods.

• The Techtextil and Texprocess trade fairs have a positive view of the future and invite the sector to take part at Frankfurt Fair and Exhibition Centre from 21 to 24 June 2022.
• Exhibitors who register well in advance benefit from an early-booking discount.

The dates for the next editions of Techtextil and Texprocess have been set and the leading international trade fairs for technical textiles and nonwovens and for the processing of textile and flexible materials are set to attract exhibitors and trade visitors from all over the world to Frankfurt am Main from 21 to 24 June 2022. Thus, the fairs are shifting the biennial cycle of events from odd to even years, which fits in perfectly with the sector’s international event calendar. Companies that book exhibition space at one of the two trade fairs no later than 31 August 2021 benefit from an early booking discount. “We see the future in a positive light and are confident that we will finally be able to give the sector the opportunity to meet and exchange ideas and information in June 2022. The desire for personal encounters, direct communication and new impressions is growing from day to day”, says Olaf Schmidt, Vice President Textiles and Textile Technologies.

Elgar Straub, Managing Director, VDMA Textile Care, Fabric and Leather Technologies, emphasises that, “Texprocess and Techtextil are the world’s foremost trade fairs for our innovative sector by a large margin. Both events offer customers an unrivalled overview of state-of-the-art innovations and technological developments – and beyond. Particularly when it comes to the latest trends for sustainability and digitalisation, Texprocess and Techtextil in Frankfurt represent the most important, future-oriented market. This makes it all the more important for both the exhibitor and visitor sides of the sector that we have the opportunity to obtain an overview of the latest market developments, to exchange ideas and information and to initiate new business. We are very relieved about this and hope that, next year, we will once again have the chance to generate new momentum for our sector in the international market.”

For the first time, Techtextil and Texprocess will occupy the western sector of Frankfurt Fair and Exhibition Centre with a total of four exhibition halls and, with a hybrid format, offer the best of both the physical and immaterial worlds: personal communication, virtual networking opportunities and maximum digital coverage. With a comprehensive hygiene and safety concept, Messe Frankfurt will ensure that all visitors and exhibitors can take part safely and with a good feeling.

Lectra’s Shareholders’ Meeting appointed Jean Marie (“John”) Canan as a new Director, for a period of four years. Jean Marie Canan becomes a member of Lectra’s Audit Committee, Compensation Committee and Strategic Committee.

A Canadian national, at 64, Jean Marie Canan is currently Lead Independent Director and Chairman of the Audit Committee of REV Group, an American company listed on the NYSE; Director and Chairman of the Audit Committee of Acasti Pharma, a Canadian company listed on the NASDAQ and Director of the Angkor Hospital for Children, a leading non-profit pediatric hospital in Cambodia.

Jean Marie Canan, graduated from McGill University in Montreal, Canada and is a Canadian Certified Public Accountant (CPA), began his career at PricewaterhouseCoopers (PwC) in 1978, starting in their Montreal office, and then two years in their Hong Kong office. From 1990 to 2014, he held many ever-increasing positions of responsibility at Merck & Co, Inc. (“Merck”). These included senior roles in finance, strategy development, business development and operations. He was part of a small team that led the acquisition of Schering-Plough by Merck. He also provided operational oversight for most of the Merck group’s joint ventures, including DuPont-Merck, Johnson and Johnson-Merck, Astra-Merck, and Schering-Plough-Merck. Merck’s Executive Committee selected Jean Marie as one of the five senior leaders charged with defining Merck's new strategy in 2006.

• Closing the loop from fiber to fiber in fashion

Lenzing, a leading global supplier of wood-based specialty fibers, and Södra, a producer of pulp, signed a cooperation agreement today, June 02, 2021. The cooperation involves the transfer of knowledge between the two companies, which have been proactively driving the circular economy issue for many years, and a joint process development followed by a capacity expansion for pulp from post-consumer waste. The jointly developed pulp OnceMore® will subsequently also be used as a raw material for the production of Lenzing’s TENCEL™ x REFIBRA™ branded specialty fibers.
The goal is to process 25,000 tons of textile waste per year by 2025.

OnceMore® by Södra is the world’s first process for industrial-scale recycling of textile waste of blended fibers, and it’s the forest who makes that possible. The process combines wood cellulose with textile waste to create a pure, high-quality dissolving pulp which can be used to produce new clothing and other textile products. During 2022, a new investment will ten-fold the production capacity of OnceMore® pulp and reach a higher level of recycled textile content. The goal for 2025 is to process 25,000 tons of textile and offer a OnceMore® pulp based on our wood material and 50 percent recycled textile material.

Angesichts zahlreicher Marktveränderungen, die die Kosten des Materials, der Komponenten, der Chemikalien, der globalen Fracht und Logistik beeinflussen, wird Electronics For Imaging, Inc. Preiserhöhungen für Inkjet-Tinten, -Teile und -Zubehör einführen. EFI™ wird ab dem 1. Juli 2021 neue Preise einführen. Hiervon betroffen sind Tinten, Zubehör und Druckerteile von EFIs Produktlinien VUTEk®, Großformat, Reggiani, Cretaprint®, Nozomi und Cubik.

"Seit dem Beginn der Pandemie hat EFI gewissenhaft daran gearbeitet, die Lieferketten zu festigen und die bestmögliche Qualität und Konsistenz aller Inkjet-Produkte beizubehalten", sagt Scott Schinlever, COO, EFI Inkjet. "Trotz der ergriffenen konsequenten Maßnahmen zur Kostendämpfung haben anhaltende Herausforderungen des Marktes Preisanpassung unumgänglich gemacht, um die kontinuierliche, ununterbrochene Belieferung unseres weltweiten Kundenstamms sicherzustellen.

Combining expertise for more sustainable fashion
Ever wonder how much water was used to make your favorite cotton T-shirt? About 2,700 liters, or roughly three years of drinking water. What first comes to mind is probably the water that was essential to growing the cotton crop. Surprisingly, cotton is a drought-tolerant plant, and often less recognized is the strain that can be put on water resources to dye cotton textiles.

Progress is being made across the industry to lessen the strain on our precious water resources. Over the past several years, Dow collaborated with Cotton Incorporated to research and validate their product, ECOFAST™ Pure Sustainable Textile Treatment, that can help drastically reduce water and chemical use during the dyeing process. Major fashion brands are integrating it into their supply chain to dye more sustainably, without sacrificing color or quality.

Problem
Cotton dyeing is very resource-intensive and puts strain on local waterways. A large amount of water is used in the dyeing process – up to 5 trillion liters a year, or nearly enough to supply all of humanity with drinking water. Significant amounts of chemicals and dye are needed to get the desired colors consumers expect too. This is part of the reason textile mills account for 20% of industrial water pollution globally. Wastewater from the dyeing process can be polluting and require costly treatment and these challenges are found in regions that already face water scarcity.

Solution
Reforming processes in an industry as established as textiles is no easy feat. Collaboration across the sector is needed to bring about sustainable change. With that in mind, Cotton Incorporated approached Dow. They wanted help scaling a cotton technology to support more sustainable textile dyeing.Leveraging Cotton Incorporated’s industry expertise and Dow’s material science knowledge, they worked together to understand and validate the benefits of our patented ECOFAST™ Pure Sustainable Textile Treatment.

How can colors be more responsible?  
ECOFAST™ Pure is a pretreatment applied before the dyeing process to produce cationic cotton. This means the charge of cotton is permanently changed from negative to positive, so it acts like a magnet to attract negatively charged dye to the material. How does that benefit the textile mill? It significantly decreases the amount of water, chemicals, dye and energy needed to color cotton. A third party reviewed and validated life cycle assessment, available by request, helped further prove the benefits.

Todd Zimmerman, a long-time graphic arts executive with a strong track record of growing advanced technology initiatives in print, has joined Electronics For Imaging, Inc. as its new vice president and general manager, Display Graphics.

He comes to EFI™ from Fujifilm® USA, where he spent a decade and a half in a variety of executive roles, most recently as division president and corporate VP of Fujifilm Global Graphic Systems. Prior to joining Fujifilm, Zimmerman worked in sales with Kodak Polychrome Graphics.

Zimmerman assumes his new role at a time when many EFI customers are growing their businesses to meet recovery-fuelled, post-pandemic business needs, especially in key application areas, such as point-of-purchase graphics, tradeshow and event signage, and environmental graphics and décor. As print businesses regain their momentum, Zimmerman will lead EFI’s largest inkjet business segment, a Display Graphics business that is among the world’s largest developers of superwide-format UV LED and dye-sublimation inkjet printers and inks.

• Create truly unique yarn designs: with up to 6 colors from a large predefined color range and infinite combinations of twisting & air entanglement
• Endlessly recyclable yarn solution - available in both standard PA6 and 75% recycled content EqoCycle PA6 yarn
• Efficient and flexible - all colors in stock to shorten lead-time; customized lot sizes

B.I.G. Yarns brings inspirational design freedom to high-end loop-pile contract and automotive carpets with the unveiling of ColorMind. The innovative yarn technology is B.I.G. Yarns’ first venture into a two steps yarn collection, offering a unique solution for creating multi-color PA6 yarns for any carpet design.

Available from mid-June 2021 in both standard and EqoCycle 75% recycled content yarn, designers are invited to work closely with B.I.G. Yarns experts to realize the designs they have always wanted. Combinations of variable levels of twisting and air entanglement, using up to 6 colors at once, elevate design possibilities beyond current limitations.

The ColorMind color bank features predefined colors, always in stock, meaning short lead times. Manufacturers can also benefit from customized lot sizes and bobbin length, creating even more flexibility and design freedom. To preview a taster of the potential directions opened up for loop-pile carpets, B.I.G. Yarns has used the technology to achieve its own “Optica” dot effect and “Illusion” wave effect as inspiration for customers’ design explorations.

“ColorMind offers never-seen yarn diversity to support a new level of design sophistication in high-end carpet segments. We’re very proud and excited to enter into two steps yarns with a solution offering something truly special, the result of intensive dedication from our design and development teams,” comments Emmanuel Colchen, General Manager, B.I.G. Yarns. “ColorMind combines our strengths in delivering high-performance, more sustainable yarns to fit the evolving demands of these segments, underpinned by our expertise in color sequencing and color mixing. We’re looking forward to exciting collaborations and innovative, eye-catching designs for future loop-pile carpets.”

ColorMind PA6 yarns are based on a unique Solution Dyed Nylon yarn and are suitable for Class 33 certification (heavy commercial use). The EqoCycle yarn version is mainly based on post-industrial waste and supports contract and automotive carpet manufacturers with a drop-in circular solution to reduce the ecological footprint of their end carpets.