From the Sector

•  Historically difficult market environment – trade tensions put textile value chain under pressure in 2019
•  Prices for standard viscose at a historic low
•  Positive development of the specialty fiber business with a revenue share of already 51 . 6 percent
•  Strategic investment projects are progressing according to plan
•  sCore TEN targets for 2024 defined – EBITDA of EUR 800 mn

Lenzing – Despite a generally difficult demand environment for textile fibers and a drastic drop in prices for standard viscose, the Lenzing Group recorded a solid business development in 2019. The disciplined implementation of the sCore TEN corporate strategy and the accompanying focus on specialty fibers once again helped to mitigate the effect of unprecedentedly low standard viscose prices.

As a result, revenue dropped by 3.3 percent from EUR 2.18 bn to EUR 2.11 bn in 2019, driven by lower selling prices as well as standard fiber volumes. Due to positive mix effects and more resilient specialty fiber prices, the share of specialty fibers increased from 45.5 percent to 51.6 percent of revenue. The earnings development was largely influenced by the decline in revenue, but also by negative currency effects on material and personnel costs. EBITDA (earnings before interest, tax, depreciation and amortization) fell by 14.4 percent from EUR 382 mn to EUR 326.9 mn. The EBITDA margin declined from 17.6 percent to 15.5 percent. Net profit, at EUR 114.9 mn, was 22.4 percent lower than in the previous year at EUR 148.2 mn. Earnings per share amounted to EUR 4. 63 ( 2018: EUR 5 . 61 ).

Non-contact precision spray technology enhances productivity, sustainability and process control

Baldwin Technology Company Inc. has announced that it will showcase the TexCoat G4 non-contact precision spray fabric finishing system at the Techtextil North America tradeshow, held from May 12 to 14, 2020, in Atlanta (booth #3048).

With extensive sustainability benefits, unprecedented tracking and process control, and industry 4.0 integration, the TexCoat G4 provides consistently high-quality fabric finishing, with no chemistry waste, as well as minimal water and energy consumption. 

Baldwin’s innovative non-contact spray technology eliminates chemistry dilution in wet-on-wet processes. The TexCoat G4 consistently and uniformly sprays chemistry across the fabric surface and applies it only where needed, on one or both sides of the fabric. Customers can expect no bath contamination during the finishing process, as well as minimal downtime during changeovers, which are made easy with recipe management that includes automated chemistry and coverage selection.

The TexCoat G4 also enhances sustainability by wasting no chemistry during color, fabric or chemistry changeovers, and because only the required chemistry volume is applied to the fabric, wet pick-up levels can be reduced by up to 50 percent—leading to 50 percent less water and energy consumption. Furthermore, in single-side applications, drying steps can be eliminated for various textiles, including those that are back-coated and laminated, thereby streamlining and simplifying the production process.

A close eye on quality with the Eye Compact II

Eltex of Sweden AB, a member of TMAS, the Swedish textile machinery association, reports solid success with its Eye Compact II yarn monitoring system for carpet tufting machines, since its launch at ITMA 2019 in Barcelona last June.

The sensor units of the Eye Compact II,Brian Hicks, Eltex CEO explains, have been successfully miniaturised to approximately a third of the size of those with the established Compact system, allowing them to be mounted on the very latest high speed tufting machines that are graphics driven, with limited space at the puller rollers.

Early stage prevention
Unlike the sensor systems that are employed at later positions on tufting machines – in order to detect faults in the formed fabric – Eye Compact II technology is about prevention at an earlier stage, through the detection of missing yarns.

Critically, the sensors need to be installed after the last puller roller and before the tufting needles, because otherwise the roller could still be feeding yarns that will not been successfully taken by the needles. This is only possible with the extremely slim Eye Compact II units, which can also be positioned either above or below the rollers.

Guarantee
Another benefit is that the sensors can be arranged more closely together, with each of them monitoring 16 yarn positions, and their robustness ensures that once fitted, there is little the technicians or operators need to do.

Automatic
The Eye Compact II system easily learns pattern changes and displays the number of yarns involved to the operator for confirmation, and different parameters for different yarns groups can also even be set if required. With its research and development work primarily carried out at its headquarters in Osby, Sweden, and North American sales and service operated from its subsidiary in South Carolina, the manufacturing plant of Eltex has been located at Templemore in Ireland since 1976, providing significant advantages in terms of high flexibility and logistical services to customers on both sides of the Atlantic.

Beaulieu Fibres International prioritizes collaborative product development & sustainable long-term partnerships

• Up & running: pilot line & new fibre line in Italy, BICO capacity for industrial fibres in Belgium
• Introducing new Meraspring for soft cushioned hygiene nonwovens
• Extended fibre range for filtration applications
• Stand 1340, INDEX™20, 31^st March – 3^rd April, Palexpo, Geneva

Beaulieu Fibres International, the leading European polyolefin and BICO fibre supplier, will announce at INDEX™20 completion of its pilot line in Terni, Italy, the start-up of the state-of-the-art multifunctional production line in Terni, and the new BICO line in Belgium. The company invites the Nonwoven sectors to join efforts in accelerating the development of innovative and sustainable solutions for a rapidly changing global market (Stand 1340).

New products are also on their way to show. For nonwoven converters serving the hygiene segment, Beaulieu Fibres International will unveil Meraspring to the European market at INDEX™20. The BICO-fibres are made with polyethylene (PE) in the sheath and polyethylene terephthalate (PET) in the core, and are the latest addition to the hygiene portfolio.

For the sixth time now, Oerlikon Nonwoven will be showcasing market- and customer-oriented solutions for hygiene, medical, filtration and other technical applications at the globally-leading nonwovens trade fair INDEX in Geneva, Switzerland. Between March 31 and April 3, 2020, visitors to the trade fair can convince themselves of the Neumünsterbased systems constructor’s extensive product and process know-how.

Comprehensive spunbond portfolio – always the right solution
Oerlikon Nonwoven meanwhile has a very broad range of spunbond technology products and services. The process for manufacturing geotextiles from polyester or polypropylene has been optimized; it is characterized by high production capacities and yields, with simultaneously low energy consumption for producing benchmark nonwoven products.

For the manufacture of hygiene nonwovens, Oerlikon Nonwoven offers its new QSR (Quality Sized Right) systems. Here, the benefits of the Chinese machine construction partner’s nonwoven formation are integrated into the complete solution. The advantage for nonwovens producers: highly competitive solutions at attractive prices with comparably low investment.

Cost-efficiently manufacturing meltblown nonwovens
New, unique and highly sophisticated filter media can be easily and efficiently manufactured thanks to Oerlikon Nonwoven’s optimized meltblown technology. Whether as a stand-alone system with one or several positions, as ‘plug & produce’ installations for already existing systems or in conjunction with other technologies: the Oerlikon Nonwoven meltblown process already enables the cost-efficient manufacture of meltblown nonwovens with the quality requirements of tomorrow. Ever more producers are choosing the meanwhile extensively tried-and-tested and consistently further-developed Oerlikon Nonwoven meltblown solutions.

Airlaid technology for the nonwovens of tomorrow
Pulp or cellulose fibers as raw material for manufacturing nonwovens are currently virtually unrivaled with regards to sustainability and environmental compatibility. The Oerlikon Nonwoven airlaid process is the ideal solution for processing this raw material into high-end products for a wide range of applications. Today, there is huge demand for manufacturing solutions for high-quality, lightweight airlaid nonwovens with economically attractive production speeds and system throughputs. In this area, the patented Oerlikon Nonwoven formation process – which also permits the homogeneous mixing of the most diverse raw materials, while simultaneously guaranteeing superb evenness and homogeneous fiber laying – is setting standards even for nonwovens with low running meter weights. And the benefits of this technology are also increasingly gaining significance in sustainable recycling applications.

P&G patented PHANTOM technology from Teknoweb Materials
Also being showcased at the trade fair stand is the P&G patented PHANTOM technology from Teknoweb Materials, Oerlikon Nonwoven’s strategic partner for hygiene products and wipes. The PHANTOM technology is released to Teknoweb Materials by P&G in worldwide exclusive license. The PHANTOM technology is the superior dry laid alternative technology for manufacturing wet wipes from pulp and polymer fibers, for example. Compared to conventional, known processes, this technology offers superior performances with cost advantage in much more eco-friendly products. Dispensing with hydroentanglement renders subsequent drying of the material redundant. Targeted process management allows the optimal setting of the relevant product parameters such as softness, tenacity, dirt absorption and liquid absorption.

At this year’s trade fair „SIMAC Tanning Tech“, PFAFF Industrial, together with DÜRKOPP ADLER and the regional agency DAP ITALIA, will present the latest solutions for shoe and leather processing. The fair will take place in Milan from 19th to 21st of February 2020. The joint booth is located in Hall 14, No. C09.

PFAFF News and Highlights:

PFAFF 3806
New integrated workplace for closing rub-down seams, such as heel-, front- and side seams on street shoes, slippers and leg boots. The PFAFF 3806 is equipped with two-thread chainstitch high-speed seamer head PFAFF 5487 with drop feed and variable top feed, high lift and adjustable top feed pressure, which ensures consistently high quality. Reinforcing tapes, which may be applied from top impart greater durability to the seams and prevent fine leathers from being pulled out of shape. Automatic control sequences (via parameter or photocell) reduce the manual handling and increase the process reliability and output.

PFAFF 1591
On the fair PFAFF INDUSTRIAL will show its electronic single-needle shoe post-bed machine with touch-control panel, new thread trimmer for short thread ends (< 5 mm) and new programmable thread tension. The key benefit of “programmable thread tension” is that suitable thread tensions can be applied for different material thicknesses and/or for different seam sequences (as these can be programmed on electronic machines). The tensions can be accessed and/or set via a knee switch or stitch counting. Manual setting of the thread tension, as is common with current shoe machines, is no longer necessary with the programmed thread tension.

PFAFF 8303i
The ot-air taping machine for welding continuous seams on water-resistant, waterproof and breathable materials will be exhibited as “shoe version” with very small/slim post from back. Effortlessly shoe uppers with small radii can be taped. The slim post and the differential feed (via two separate drive motors for the top and bottom feed roller) ensures absolute neat seams and a requested fullness und shaped parts.
 

In the latest technology innovation from members of TMAS (the Swedish textile machinery association), ACG Kinna and ACG Nyström have teamed up with Juki Corporation – the world’s leading sewing machine manufacturer – in the development of a new automated line concept that can considerably speed up the production of finished filter bags.

Woven or nonwoven filter bags employed in a wide range of industrial processes may be under the radar as products, but they represent a pretty significant percentage of technical textiles production.

According to a recent report from BCC research, a leading US analyst covering this sector, industrial filtration represented a $555 million market in 2019 and some of the key areas where such filter bags are employed include:

• Metal fabrication, with effective filtration required for manual and automated welding, thermal cutting, blasting and machining, especially for coolant filtration.
• The process and energy industries, including foundries, smelters, incinerators, asphalt works and energy production plants.
• Other key manufacturing fields – often where dust is generated – including the production of timber, textiles, composites, waste handling and minerals, in addition to chemicals, food production, pharmaceuticals, electronics and agriculture.

Line integration
The new SFL-2000 line is the result of a four-year development project between Juki Central Europe, headquartered in Poland, and the two ACG companies.

It is capable of handling a wide range of different filter media, and as an all-in-one solution, can produce high quality and accurate seams to pre-defined parameters, with optional modules allowing for customised constructions.

Hexcel is collaborating with NaCa Systems, a Tier 1 supplier of natural fiber composite automotive interior parts, on the development of a lightweight carbon fiber prepreg and wood fiber composite sportscar seat back using a rapid press molding process. This innovation validates a short cycle time production process for CFRP and wood fiber composite parts and offers a host of benefits to automotive manufacturers.

Hexcel supplies NaCa Systems with an optimized version of its HexPly® M77CS epoxy prepreg material. HexPly® M77CS is a fast curing hotmelt, thermosetting epoxy matrix, specifically designed for prepreg applications for which short cure cycles and clear surfaces with perfect aesthetics are required.

The lightweight seat back demonstrates a 40% weight saving compared to a typical injection molded plastic component whilst also featuring a significantly improved CO2 footprint vs a full carbon part. The prepreg and wood fiber structure doesn’t produce sharp edged pieces when damaged. In addition, wood fiber composites also increase sound absorption, contributing to improved NVH damping within the vehicle interior.

The NaCa Systems seat back will be on display on the Hexcel stand at JEC World 2020.

The origins of both Industry 4.0 and an awareness of the need for more sustainable manufacturing methods can arguably be traced back to the year 1971.

It was in 1971 that the first microprocessor was introduced by Intel, and also that the first and perhaps now most well-known environmental campaigner, Greenpeace, was founded.

As such, a direct line can be charted from that year to today’s automated textile manufacturing machinery concepts, as well as the drive to develop more increasingly resource-efficient processes.

All of the recent innovations which have been introduced to the market by A. Monforts Textilmaschinen GmbH & Co. KG, for example, are being powered by the possibilities of Industry 4.0 and developed in response to the market demand for more sustainable production.

They include the new ‘digital twinning’ capability introduced in 2019 for all Monforts machines, with advanced sensor technologies which make it possible to access comprehensive technical machine data from any location using the company’s Smart Support and Smart Check apps. In addition, the digital twin system provides information on individual wear parts, such as, for example, converters or gears.

These latest developments have been very favourably received by Monforts customers, especially in Europe.

50th anniversary
The very first Heimtextil – the leading trade fair for the home textiles market – was also held in Frankfurt in January 1971 and Monforts customers Bierbaum Group and Konrad Hornschuch AG are amongst the German companies who were there from the very start and have attended every annual show since.

Bierbaum Group, based in Borken, is the company behind the well-known Irisette bedding brand and is celebrating its own 125th anniversary in 2020. It has also introduced products bearing the German government’s new Grüner Knopf textile seal of approval for sustainable production.

As a specialist in synthetic leathers for home surfaces, as well as vehicle interiors, Konrad Hornschuch AG, of Weissbach, has been a member of the €44 billion automotive giant Continental AG since 2016.

Representatives from both companies received memorial trophies at a special presentation held on January 7th during the 50th anniversary Heimtextil show.

The home textiles market remains very strong in Germany, with sales amounting to some €9.6 billion in 2019, according to analyst IFH Cologne.

Global growth
The first Heimtextil in 1971 was a significant success, attracting 679 exhibitors from 26 countries.

This year’s show, however, attracted a total of 2,952 exhibitors from 66 countries, reflecting not only the growth of the home textiles industry, but also the globalisation which has taken place over the last half century.

Monforts now has customers for its advanced finishing technologies around the world, with home textile customers from India and Pakistan being particularly well represented at Heimtextil 2020.

Among stand outs from Indian companies at this year’s show was the 2020 collection of Welspun India’s famous Christy England brand, inspired by botanical studies of the gardens of British stately homes. Welspun towels meanwhile benefit from the company’s HygroCotton hollow core yarn technology, produced by a proprietary spinning method which ensures they become softer, fluffier and more absorbent after every wash.

An equally ground-breaking new technology is being introduced by Trident Group, which is one of India’s largest vertically-integrated home textiles manufacturers and two years ago installed five complete Monforts finishing ranges for its new linen department.

Trident’s patented Air Rich yarns feature pores throughout their cross sections for high breathability and absorbency, as well as rapid drying.

Monforts home textile customers from Pakistan stressed the resource efficiency of their processes and products as a result of investments in advanced technology, and during the show the ‘Sustainable Pakistan’ initiative was announced.

Supported by GIZ, the German Society for International Cooperation, the initiative aims to reshape global perceptions of Pakistan’s manufacturers and their innovations. So far, twenty producers have been carefully chosen to be presented on this global platform and will help rebrand Pakistan’s textile industry at the Heimtextil exhibitions going forward.

Heimtextil’s organiser Messe Frankfurt also announced its own new alliance with the United Nations Office for Partnerships, in order to support the UN’s Sustainable Development Goals.

Constancy
Many things have changed since 1971 and home interiors are certainly no longer predominantly orange and brown – and perhaps unlikely to ever become so again.

It’s clear, however, that there has been a constancy in the push to consistently improve textile technologies, processes and products that may have originated in Europe, but have subsequently spread around the world.

And the significance of both microprocessors and sustainability in 2020 could only have been guessed at back in 1971.

United Carton Industries Company (UCIC), a leader in Saudi Arabia's packaging industry, is achieving a breakthrough advancement in digital print for corrugated packaging with the installation of an EFITM Nozomi C18000 six-colour, single-pass LED inkjet printer from Electronics For Imaging, Inc. The new printer will bring exciting opportunities for UCIC to enter new market segments, expand its customer base, and create a competitive advantage in the region.
 
"UCIC's priority is to meet customer expectations, which are constantly increasing due to ever changing market conditions," said UCIC President Mohnish Rikhy. "New technologies such as digital printing with EFI's Nozomi C18000 printer help us meet these demands and stay ahead of the competition."