From the Sector

• At Kingpins Show Amsterdam (24-25 October) the new “Committed Accessories” dedicated to denim take centre stage.

For the appointment with the exhibition dedicated to denim Metalbottoni focuses on its new range of increasingly green accessories which have captured the attention of the northern European brands most attentive to sustainability in the world of jeans and elsewhere. A range of proposals which, in recent months, has progressed remarkably, following the rules established by the corporate responsibility protocol called NO IMPACT.

This is a responsible approach underlined by the promise “Committed Accessories”, but also a strategic choice with a view to approaching those markets which so far have appeared to be most keen on the subject, for example northern Europe, Benelux and the United States, California in particular. This means that Metalbottoni is acting with increasing assertiveness on those scenarios where it has been present for a long time, in order to increase the segments depth, intercepting new ones, thanks to its wide-ranging eco-compatible proposal.

NO IMPACT: “Committed Accessories” expanded

It is the constant search for sustainable innovation that reveals the extent of the progress made over the past few months by Metalbottoni. For the Kingpins Show exhibition, there are many novelties in store from the company, extending its range in terms of sustainability. Firstly, there is the new MONSTER line eco-processing, special for pure denim, which – apart from metal – includes new material solutions developed through high-profile collaborations.

Also the LEATHER ACCESSORIES line is extending its range of sustainable materials. The line of tags and rear waistband labels is enhanced through interpretations based on two new eco-friendly materials: recycled jacron and cork. For denim designed to be 100% green, also in accessories. Sustainable proposals are increasingly integrated throughout the Metalbottoni range, for example the new glossy and satin finishing developed for the line LABORA on exclusive metal accessories.

Partnerships with brands from northern Europe: Bik Bok and Kings of Indigo

One of the most important collaboration in sustainable fashion is the one with the Norwegian brand Bik Bok. The brand that was founded in 1973 dedicated to young women, today offer accessible trend driven fashion through a network of over 200 single-brand stores in Norway, Sweden, Finland and Austria. The brand has since 2017 chosen to use only BCI (Better Cotton Initiative) certified cotton for their in house premium denim brand Never Denim. For Never Denim Metalbottoni has realized a series of jeans buttons and personalized rivets, all entirely produced according to the NO IMPACT protocol; which means recycled raw materials, no use of chemical agents, through processing and machinery that minimize the use of water and electricity, resulting 100% from photovoltaic panels. All these features are part of a capsule developed for the new AW 2018 collection for Never Denim entirely made with Fair Trade certified cotton. Thanks to this project, the No Impact becomes an integral part of a collection that is aimed at a very large, young and aware public.

Another important brand which has chosen the new NO IMPACT metal accessories is Kings Of Indigo, the Dutch denim mill which is presenting top-quality jeans, inspired by traditional American style, combined with Japanese attention to detail, which today has as many 250 authorised dealers in 12 countries, with a very strong focus on northern Europe.

More and more sportswear for the new Monster SS 2020 collection

The great Metalbottoni classic dedicated to denim confirms the trend of strongly merging with the world of sportswear. The MONSTER line introduces the style developments of the SS 2020 season, with the range being more and more influenced by technical and sports interpretations, alongside sustainable production processes based on the NO IMPACT protocol. The new MONSTER proposals include items made of non-metal material, using sustainable processes, of natural origin and 100% biodegradable; these accessories are similar in appearance to traditional polyester, interpreted in a responsible way, developed through a series of special and unique effects. Also the button, rivet and small plate range has been restyled, having always been the core of the MONSTER line. Today the number of solutions available increases  hanks to new vintage finishing, developed on metal accessories, which are also totally green. “The denim world is moving in a clear direction: that of sustainability.” says Maria Teresa Ricciardo, Creative Director at Metalbottoni, “This is true in particular for some markets, which are strategic for us, and where we are proving increasingly successful, thanks to constant product and process research from a green  perspective, which Metalbottoni today is able to offer within the framework of the NO IMPACT pathway which we have been pursuing for a long time”.

A new important partnership marks the path of Itema towards a greener future for the whole denim production chain. Prosperity Textile, one of the main denim producers worldwide, has chosen for its new facility one of the most interesting and sustainable-oriented Itema technologies, iSAVER™ equipped on the Itema R95002denim. Prosperity Textiles is, in fact, one of the early adopters of this new technology chosen for the new plant that the world-famous indigo fabrics producer will open in Vietnam, and that will be exclusively equipped with the latest Itema weaving machine model, demonstrating once again its green, future-oriented approach.

Thanks to its partnership with Itema, Prosperity Textiles makes again a step forward in terms of sustainable innovation, as one of the first denim producers able to successfully turn - even the weaving production - green. A partnership that is planned to be showcased in some of the most important textiles exhibitions worldwide focusing on Asian and denim markets. A path that starts with KingpinsShow, Amsterdam (October 24-25) where the Chinese denim producer will put into the spotlight this brand-new solution aimed at further increasing the eco-driven approach of the company; an important appointment is also in the Itema calendar: the ITMA Asia + CITME 2018 exhibition, Shanghai (October 15-19) where the Italian company showcased the important green step-forward in denim weaving processes and the full range of its innovations.

iSAVER™: the ideal green tool for denim weaving
This new technology, developed by ItemaLab™, the Itema Advanced Innovation Department, isable to completely eliminate the left-hand weft waste, allowing to insert the weft yarns in the fabric without the need of additional yarns. iSAVER™ significantly reduces raw material waste, leading to tangible benefits in terms of machine’s efficiency, cost reduction and energy saving.

Just consider that the weaver will gain a minimum saving of € 2.000 per year per machine, and our planet will gain even more. In fact, for the first time in the weaving industry, a sustainable approach when choosing the weaving equipment is now possible. Thanks to iSAVER™, 1.000 Kg of cotton per machine per year – the 3% of the total raw materials - will be saved, thus avoiding the waste of 20 million liters of water, equivalent to 400.000 showers.

Numbers are clear: the introduction of iSAVER™ clearly sets a new benchmark in terms of sustainability within denim fabric production. Furthermore, the iSAVER™ is one of the key features of the Itema R95002denim, the rapier weaving machine born and designed to weave denim guaranteeing to weavers superior textile quality, outstanding user-friendliness and tangible energy and raw materials saving.

A joint eco-driven path
Itema, understanding very well the importance of saving resources and energy to drive the textile production in the direction of a more conscious manufacturing, focused its attention to develop breakthrough weaving solutions and in 2018 introduced to the market the iSAVER™, a revolutionary device dedicated specifically to denim fabrics able to eliminate the waste selvedge on the left-hand side of the fabric.

This is one of the reasons-why Prosperity Textiles has chosen to adopt this extraordinary technology for its new facility. Today Prosperity Textiles is one of the main denim producers worldwide, counting 1,300 employees and 20 offices worldwide. Moreover, a second state-of-theart denim mill will be inaugurated in Vietnam by the end of 2018.
What makes Prosperity able to stand out on a global scale, is not simply its products high quality but the ability to conciliate flawless denim fabric production with a sustainability-oriented mindset that permeates every stage of their textile supply chain.

Prosperity, indeed, adopted innovative green manufacturing concepts through all stages of the company’s operations, from product development, raw materials procurement and processing, to natural resources and energy utilization including waste management. Prosperity’s denim production is based on the employment of best quality yarns available on the market, while still targeting the most sustainable sources, from BCI to organic, recycled cotton, and from Tencel™ Lyocell to Sustans™, in 2017, more than 20 million yards fabric sales from Prosperity are with sustainable fibers inside.
The introduction of eco-friendly dyeing and finishing practices allows the company to create beautiful indigo shades and performance denims, with less water and energy consumption compared to the traditional systems. Last year, Prosperity produced 20% more fabrics than 2016, yet the water and electricity use and greenhouse gas emission was down by 11.5%, 7.9% and 5.4% respectively.

In this continuous process of improvement and contribution to a greener industry and planet, plays a central role the recent renewal of the historic partnership and strategic alliance with Itema – the leading manufacturer of cutting-edge weaving solutions – which represents the natural evolution of a constant process of research for partners able to support Prosperity Textiles’ growth as a sustainable company.
Up to now, all innovations and efforts done in this regard addressed the traditionally more polluting steps of the denim production. In fact, if the development of green technologies is nowadays spread in many fabric processing stages, such as finishing and dyeing, weaving was not yet capable to provide sustainable solutions to weavers.

The Mechanical Engineering Industry Association (VDMA) has awarded two prizes to graduates of the Institut für Textiltechnik (ITA) of RWTH Aachen University - the dissertation prize and the creativity prize of the Walter Reiners Foundation of German Textile Machinery 2018. ITA alumnus Dr Benjamin Weise was awarded the dissertation prize for the development of novel fibres for textile charge storage devices. For their work on a guide to 4D product design, Jan Merlin Abram and Aalon Tal (both ITA students) were honoured with the creativity prize. The dissertation prize is endowed with €5,000 whilst the creativity prize contains a one-year scholarship of €250 per month. Peter D. Dornier, President of the Walter Reiners Foundation and Chairman of the Management Board of Lindauer DORNIER, presented the awards on the 18 September 2018 at the 18th Textile Machinery Forum in the Digital Capability Center in Aachen, Germany.

Graphene revolutionizes all-in-one - supercaps, reduction of terahertz radiation and antistatics

In his dissertation "Development of graphene-modified multifilament yarns for the production of textile charge storage devices", laureate Dr Benjamin Weise developed novel fibres made of polyamide and graphene and further processed them into textile surfaces. The newly developed polyamide graphene fibres are featuring a multitude of advantages:

• Due to their high performance in the charge storage area, they are predestined for use in double-layer capacitors, so-called super capacitors, or supercaps in short. Compared to lithium-ion batteries, supercaps offer significantly higher power density and a longer lifetime as no chemical reactions are taking place. towing to the graphene platelets in the filaments, it is now possible for the first time to integrate a charge storage device directly into a textile without having to sew in a rechargeable battery. This new fibre is therefore suitable for prospective use in smart textiles, for instance in a textile defibrillator.
• The new graphene-modified polyamide fibres can attenuate inident terahertz radiation up to 25 % of their original intensity. Terahertz radiation, for example, offers transmission rates of 100 Mbit/sec and is therefore of high interest for high-performance wireless communication. However, the radiation could damage sensible electronics as in aircrafts if this technology will be used widespread. Consequently, the shielding of the radiation is of high importance, e.g. in the form of fibre composite components in the aircraft, which protect the on-board electronics.
• As the fibres are showcasing a dissipative electrical conductivity, personal protective equipment is another prospective field of application.  

The development of a pilot process for graphene-modified fibres and the production of textile demonstrators are novel and disruptive attainments of Dr Weise’s PhD thesis and the reason for the award ceremony to him. Due to its outstanding properties, the European Union is funding research on graphene within the frame of the "Graphene Flagship" with an overall budget of one billion Euro (source: http://graphene-flagship.eu/project/Pages/About-Graphene-Flagship.aspx).

Modular product design of 4D products is now possible in simplified form

How can three-dimensional products change their shape over time and thus become "four-dimensional"? The students Jan Merlin Abram and Aalon Tal provide answers to this question in their project work "Leitfaden zur Auslegung hybrider morphender Textilien am Beispiel eines Scharniers" (Guidelines for the Design of Hybrid Morphing Textiles Using the Example of a Hinge), for which they were awarded the creativity prize. In their work, the students offer a guideline for the development of a four-dimensional textile from the idea to the demonstrator. Four-dimensional textiles, for example, consist of a hybrid material of elastic textile on which three-dimensional structures are printed. The fourth dimension describes the change in shape and/or a property over a defined period of time (= morphing).  This change is caused by external influences such as light and heat.

Every year, the Foundation of the German Textile Machinery awards prizes for the best dissertation, diploma or master's thesis and the creativity prize for the smartest student research project. Further prizes were awarded to Eric Otto, ITM Dresden, and Susanne Fischer, Reutlingen University.

This year Swiss company Schoeller Textil AG, is celebrating 150 years of tradition and future opportunities. As a global textile solutions brand, the company specializes in the development and production of innovative technical fabrics and smart textile finishing technologies. What began as Switzerland’s first worsted yarn spinning mill in 1868, has achieved worldwide recognition for its high-tech textiles and its dedication to sustainability. For its more than 500 brand partners in 50 countries, Schoeller produces an average of over six million meters of performance textiles per year in its mills in Sevelen, Switzerland and Balingen, Germany.

When Rudolph Schoeller established what would be called “Schoeller & Sohne” in Zurich in 1868, it was within an age of ground-breaking achievement and progress inspired by the beginnings of the Swiss Red Cross and the completion of the Gotthard Tunnel in Switzerland. Schoeller quickly expanded its business and in 1954 went on to purchase a textile mill in Sevelen, located in the St. Gallen Rhine Valley, which currently serves as the company’s headquarters. That mill would soon launch the very first elastic fabric for the ski industry – or the world’s very first soft shell fabric – under the name “skifans.”

• @ Premiere Vision, Paris, 19-21st September, Booth 6G62 - 6H63

The story of a Bemberg™ heritage that has shaped a new future for smart innovation through research, knowledge and expertise to deliver the new face of Bemberg™, the one true original material for modern living. The presentation of the Bemberg™ new campaign represents a high benchmark in value for smart textile fiber innovations, and one that is built on a long heritage of innovations since 1931. Bemberg™ is the ONE new material definition for responsible luxury. The ONE for cool exquisite comfort, and the ONE whose smart heritage is born in a circular economy.

Made by Asahi Kasei, the company is the sole maker of this one-of-a-kind, matchless, high-tech natural material, with a unique and precious touch and feel. The new campaign will amplify this uniqueness and innate smartness, redefining the brand voice as Bemberg™ at an international level with an openness and positive approach that facilitates a stronger, more focused role in the market while supporting our partner’s strengths too.

It is not just another brand name, but about enhancing core values through a now even better, more refined product and process that supports our partner’s mission to materially benefit the whole supply chain with beautiful products and open, honest communication. This is the key reason to launch the Bemberg™ global brand, taking the next steps on a journey that redefines a new future of contemporary luxury this unique fiber represents.

And for this, European manufacture is playing its key role in the global role out of the latest Bemberg™ innovations. Pioneering partner mills featured at the booth include: Euromaglia, Fiveol Textil, Infinity, Ipeker, Jackytex, Lanificio Europa, O’Jersey, SMI Tessuti, Tessitura Uboldi Luigi, TINTEX Textiles, Brunello, G.I. Tessil Foderami, Gianni Crespi Foderami, Manifattura Pezzetti, Marco Pastorelli and more. The new Bemberg™ booth at Premiere Vision is a contemporary and clean vision of the brand with a glowing, whitened atmosphere of modern architecture and luminous lighting that perfectly frames the new and dynamic identity image to reveal the ‘preciousness’ essence of the brand, its amazing textiles and leading fashion innovations.

Come and review the 3 fabric galleries, each showing the latest and unique fabric designs for Fashion Forward looks, refined Jersey Dressing and Luxury Athleisure Loungewear. Fashions by Maison Margiela confirm the new status of Bemberg™ as the ONE fiber that moves the luxury of Touch to a new contemporary fashion Feel: the ONE for a cool, liquid drape and movement: the ONE for fresh, exquisite comfort, and the ONE smart material born in the circular economy.

The Bemberg™ new campaign

We show a vision from the past in a true classic vintage sheath dress from the 1991 Martin Margiela winter collection using a peach skin finish on a refined, parachute-light fabric in a signature gunmetal grey colour courtesy of Zohra Alami. And also a contemporary representation of fashion from the MM6 MAISON MARGIELA SS2018 collection with a lingerie inspired dressy style in Bemberg™ popeline. This is a multifunctional style to be used as a top or as a dress

A new technical advance in finishing from Asahi Kasei is presented at the booth. Called Velutine Evo, the finish is comparable to premium peach skin finishes today, but now with a better environmental profile by using less water and energy to produce a durable and refined finish that sets a new benchmark for everyday luxury, demonstrating the company’s ongoing commitment to R&D in smarter, market relevant innovations. The results are supported by a preliminary study carried out by ICEA according to the methodology of Life Cycle Assessment (LCA) 3rd party testing from ICEA, on datas provided by TIFAS and focusing on environmental benefits that will accrue to partners efforts to offer value with values.

Moreover, you will be able to enjoy the circularity of the Bemberg™ story: its source, manufacture and end-of-life credentials, as well as checking the LCA study, also signed by ICEA and validated by Paolo Masoni, a step that confirms a new quality profile and standard for Bemberg™ with a more responsible and unique position today. Full GRS certification, Oeko-Tex 100, ISO 14001, & Eco-Mark.
Also Bemberg™ can add to its premium position on responsible issues, starting from its raw material choice that clearly demonstrates its circular economy approach. Bemberg™ is made from a cotton linter bio-utility waste, a natural derived and abundant source, and a truly unique one in the smart fiber arena that doesn’t deplete food or forestry resources.

Bemberg™ has new Compostability Certification. Innovhub-SSI report confirms Bemberg™ filaments disintegrate at 100% value within the limits specified by the UNI EN 13432, point A.3.1 for disintegration in the composting process. Also related is a new Ecotoxicity metric to EN 13432:2000 Annex E, the compost obtained from the Bemberg™ filaments according to ISO 16929:2013 revealed the absence of any ecotoxicity effect respect higher plants. The Bemberg™ filaments tested for the presence of heavy metals and other toxic hazardous substances comply with the requirements specified by the UNI EN 13432, for the substances listed in table A.1.

Asahi Kasei is proud to present the Bemberg™ heritage that delivers a true precious uniqueness through responsible smart innovation and transparency. To make contemporary luxury materials that provoke emotive responses through its rarity, sensuality, research and creativity. The ingrained knowledge and know-how behind the brand adds value to the supply chain, working only with the best, amplifying our partner’s knowledge and dynamic commitment too.

From 4 – 6 September, leading innovations and technologies from around the world will feature in the Shanghai New International Expo Centre for Cinte Techtextil China 2018. With a growing technical textile market in China and Asia, big industry names will come to showcase new products. The Belgium, Germany and Taiwan Pavilions are predicted to draw a crowd with their return, while the Czech Republic Pavilion makes its debut appearance.

Fresh innovation from the Taiwan Pavilion
The Taiwan Pavilion lives up to its reputation as one of the leading sources of industry innovation. Ten exhibitors in the Taiwan Pavilion will showcase a variety of innovations ideal for a number of industries. With advances in medical and hygiene product technologies, exhibitors Web-Pro Corporation will offer protective cover-all materials that resist pathogens and micro-organisms and multi-layered PE films for hygiene products, while Kae Hwa Industrial will introduce their developments in materials that protect against viruses. Four Elements Energy Biotechnology will showcase their multi-functional Masterbatch product, a unique FDA-qualified, anti-mildew and transparent plastic additive that repels bacteria.

Other exhibitors to watch out for in the Taiwan Pavilion include Ritex Machinery, who will display their Air Through machinery which can be applied to nonwoven fabrics for hygienic, medical and filtration uses. Everlight Chemical Industrial’s Evereco® adhesives introduce an eco-friendly solution with heat-resistance and other resilient properties. Also offering eco-friendly alternatives is TomLong Techstile and their TPU coated fabrics, ideal for waterproof and inflatable products.

Productivity and efficiency at the German Pavilion
Following high demand in the Chinese market, the German Pavilion returns with around 30 exhibitors, showcasing their expertise in efficiency in textile production. Highlights include Baumüller Nürnberg’s modular concepts and intelligent automations which allow flexible reactions to changeable market requirements. Edelmann Technology brings new high speed winder systems for increased production rates and new concepts for reducing contamination in products. ISRA Surface Vision will present 100% inline optical surface inspection methods for quality control and process optimisations. Another product to watch out for is Kufner’s xShield®, a lightweight, soft textile with 99% shielding efficiency against electromagnetic radiation.

Other big names in the German Pavilion include Autefa Solutions, Brückner Textile Technologies, Dornier Lindauer, IBENA, J.H. Ziegler, Kufner, Perlon and more.

Belgium Pavilion returns along with a Czech Republic debut
Organised by Fedustria (Belgian Textile, Woodworking and Furniture Industry Federation), the Belgium Pavilion will include textile recycling company Belrey Fibres, engineered fabrics by Pennel & Flipo for marine and rescue industries, as well as leading coating specialists Vetex who will feature a variety of functional tapes, and R&D institute Centexbel who carry out research projects across the entire textile and polymer production chain.

The new Czech Republic Pavilion organised by ATOK, the Association of Textile-Clothing–Leather Industry, will showcase three exhibitors who will provide solutions for technical yarn, fabric processing and nonwoven fabrics. These include: GF Machinery, showcasing R&D and production of special machines and lines for glass / basalt yarn and fabric processing; Retex’s nonwoven needle-punched and air laid textiles; and STAP, Europe’s biggest manufacturer of narrow fabrics.

The Cinte Techtextil China fair is recognised by European manufacturers as a gateway to the Asian market. With investment from China boosting the technical textile industry, and more Asian countries than ever developing their technical markets, Cinte Techtextil China 2018 is set to be a hub of business potential.

Intertextile Shanghai Home Textiles has always been at the forefront of the China and Asia markets for participants to find the latest products from around the world and learn about the current market trends. This year, a series of fringe programme events together with some new show features will inspire fairgoers throughout the four-day fair.

New features for contract business

Given the growing demand for textile solutions for architecture, interior design and the hotel industry, the coming August fair will highlight leading contract upholstery suppliers with distinctive labels. In addition, the show will feature a showcase area at hall 5.1 which displays quality contract upholstery from exhibitors. The area will be decorated by interior designers, demonstrating the functionalities of different contract textile products.

To introduce the opportunities that the textile industry can capture from contract business, both domestic and international architects, hoteliers, interior designers and industry experts have been invited to share their insights about design, market, materials and project management on the Contract Business Days, on 28 & 29 August.

Naima A Khan, founder and interior designer from The Green Design in UAE, for instance, will be speaking on The Art of Sustainable Interior Design. She has worked with many international home fashion retail store developers, as well as textile and interior companies, and is experienced in using therapeutic colour schemes, sustainable materials and sunlight in different design projects. Another guest, Esra Lemmens, who is also a designer and active speaker at design events, will talk about the expanding importance of design throughout Dubai as well as her suggestions for doing business in Dubai.

Other speakers also include Martin Oliu from the international design company, Harmony World Consultant and Design (HWCD). He has participated in a broad area of design such as architectural construction & interior design and is responsible for various luxury residential and hotel design projects. Professor Thomas Charles, who has been working on industrial product design and research for user experience & consumer behaviour study, business strategy and branding designs will give a talk on ‘The Power of Innovative Design’. Trevira CS will also participate in the Contract Business Day through their Chinese representative, Jenny Zhang, who will share how the permanently flame retardant Trevira CS textiles can fit into contract business.

Digital printing and technics remain a focal point

The Digital Printing Micro Factory concept was first introduced in the 2017 edition of Intertextile Shanghai Home Textiles, and received much attention and positive feedback. To cater to the growing demand for efficient, one-step textile solutions, Global Fortune Limited from Hong Kong will work jointly with Kornit Digital and Bullmer to set up a Micro Factory at this August’s fair. An advanced digital printing system – Allegro & Cut by Kornit Allegro – will be introduced. The system streamlines the entire production process by combining printing and drying together so multiple machinery is not needed. It is also eco-friendly as one single ink set suits various fabric types, and designs will be printed in shapes and sizes that are ready for cutting. Visitors can learn more about the complete production process from printing and cutting to sewing via the onsite demonstration.

In addition to forums discussing how digital printing helps flexible production, there will also be an array of forums where some top domestic industry players will share their experience in resolving  technical problems in productions and satisfying requirements in different product tests.

Forward-looking events to ignite inspiration

The trend committee formed by international trendsetter the NellyRodiTM Agency has developed three themes, namely Caring Future, Crazy Future and Emo Future for the 2019 International Lifestyle Trends. Apart from the trend area where product displays are located, visitors can get a better understanding about the future living styles from the panel discussion and trend area tour. The agency’s creative director, Vincent Grégoire, will guide tours to explain the trend concept. He will also join other industry experts in the panel discussion on consumer lifestyle trends.

Another inspiring event during the show is the Future Talk in which representatives from different industries including fashion brand Shiatzy Chen, home appliance giant Haier, gourmets and lifestyle experts will share their perspectives on the future trends.

The show will be held from 27 – 30 August in the National Exhibition and Convention Center in Shanghai. Intertextile Shanghai Home Textiles – Autumn Edition is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

To find out more about this fair, please visit: www.intertextilehome.com.

EUROBIKE, the world’s leading trade fair for the cycling industry, included ROICA™ smart innovations into the race. Cycle retailers, brands and manufacturers discovered ROICA™ premium stretch that provides comfort and movement as it energizes.

ROICA™ joined this year’s EUROBIKE Academy line-up and host an interactive panel focused on sustainability as an added value for the cycling market. Whether an expert or newcomer, the must attend panel titled; What is Smart Innovation in the Biking Market? was held on Monday, July 9th from 12:00-12:45 in Conference Center East, Room London. Moderated by Giusy Bettoni, CEO, C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy), a Milan based company generating global strategies and identifying new values essential for today’s knowledgeable conscious consumer. The panel led the way, as they shared their expertise and discuss what they are doing to push the boundaries of innovation. They will highlight responsible dimensions and processes currently available. The all-star lineup includes:

Uwe Schmidt, Asahi Kasei’s ROICA™, Managing Director introduces cycle enthusiasts, brands, retailers and manufacturers to the world’s first premium sustainable stretch yarn: ROICA™ Eco-Smart and the ROICA™ Feel Good family dedicated to well-being.
 
Laura Gambarini, marketing and communication manager at M.I.T.I. S.p.A.: M.I.T.I. Since 1931, M.I.T.I. develops and creates premium and innovative stretch warp knitted fabrics for all the high performance sports. Cycling brands recognize M.I.T.I. as the market leader for the outstanding features of their innovative fabrics. Green soul is their ultimate creation, the first fully sustainable stretch warp knitted range of fabrics in the world, created with ROICA™ Eco-Smart family for the new generation sustainable performance garments.
 
Sven Koehler, Head of production Maloja Clothing GmbH: Maloja, an outdoor specialty brand with its roots in nature and wellbeing have developed new amazing biking sets constructed of M.I.T.I. SpA fabrics using certified yarns belonging to ROICA™ Eco-Smart family.
 
Sergio Alibrandi, Executive Marketing Director Sitip S.p.A.: SITIP creates high-tech innovative sports fabrics that are made in Italy and optimize the latest technology. Committed to smart innovation, learn how they developed their ground-breaking multi-panel thermal bib tights able to generate heat for riders that want to conquer cold winter training. Made from BeHOT fabric constructed with ROICA™ StretchEnergy™, the next level of well-being providing a new dimension to active performance.  The audience will learn how leading international cycling brand Santini is using BeHOT with ROICA™ on select products to generate additional heat – up to 2 degrees C as the cyclist moves their body, thanks to ground-breaking heat generating technology as certified by CeRism, Outdoor Sport Research Centre at Verona University.
 
 Witness ROICA™ partners as leaders in high-tech performance fabrics for the world of sports for riders that want to stand out. The unbeatable collection of well-constructed fabrics that revolutionize the premium stretch market at the following EUROBIKE Exhibitors:

• M.I.T.I. SpA (IT)
• Maglificio Ripa (IT)
• Piave Maitex (IT)
• SITIP SpA (IT)
• SOFILETA (FR)
• Sportwear Argentona S.A. (ES)

FILPUCCI GROUP proceeds along the path of commitment towards an ever more responsible innovation. The group takes part in the 83rd edition of Pitti Filati (June 27-29, 2018) with unique products, high-end knitwear and creative yarns, all resulting from the authentic Smart Innovation the company has been long committed to.
 
Research, style and fashion are key words for the world-renown Tuscan company, which unveils an always more responsible approach both at a corporate level and in terms of offer.
Here are some key elements to prove Filpucci’s relentless commitment:

• The GOTS (Global Organic Textile Standard) and OCS (Organic Content Standard) certifications obtained by the Filpucci dyeing plant add to the Clear to Wear (CTW) standard developed by Inditex Group and achieved in 2014 and to the Detox commitment, which was signed in February, 2016.
• Not only the best raw materials, but also an established knowhow in the fields of dyeing and finishing, always under the key concept of Responsible Innovation. This concept extends to each and every FILPUCCI collection and their ever-increasing offer, the roughly twenty innovative new items, the Woolen line of carded yarns and the real spearhead of premium fashion, the Collection. Among this season’s new offer: Baby Camel Re.Verso™, RWS- certified merino organic wool, Re.Verso™ cashmere, organic silks and FSC-certified viscose.
• The achievement of further certifications such as the FSC (Forest Stewardship Council) for viscose shows the care and respect towards the ecosystem as a whole, guaranteeing a product derived from a forest or a plantation forest in the respect of strict environmental, social and economic standards. The RWS (Responsible Wool Standard) finally guarantees the use of wool coming from livestock managed under rigorous criteria oriented towards the wellbeing of animals and the reduction of environmental impact.
• Filpucci Group is all about a constant vocation towards new generation values and a reliable, traceable and transparent manufacturing process, as shown by the Re.Verso™ circular economy supply chain, of which the group is a unique ambassador in the field of high-end/low-impact knitwear yarns.

With absolute quality always in mind, FILPUCCI GROUP represents a corporate model that has made of sustainability a real mission, embarking on complex paths that have brought great results with fashionable textile solutions lead by ethnical and sustainable values. Thanks to this, Filpucci’s products have become part of Patagonia Collections, an important acknowledging from the brand’s part, whose managers stated: “We are always on the hunt for the highest performing, lowest impact materials. We were thrilled to find Re.Verso ™ (95/5 transformed) Cashmere yarn from Filpucci. It allowed us to create a range of products with the insulative and soft properties of cashmere while adhering to our mission statement; build the best product, cause no unnecessary harm.”
FILPUCCI GROUP’s commitment is evident and it moves forward thanks to the passion towards responsible and innovative paths that contribute to turning the group into a reliable partner, symbol of quality and excellence.

Filpucci is also a C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy) partner.

Business networking event on the future of leather interiors

Lectra, the technological partner for companies using fabrics and leather, welcomed guests from all areas of the automotive leather supply chain at its International Advanced Technology Center (IATC) in Bordeaux-Cestas, France, for two action-packed days of demonstrations, workshops and talks by industry experts during the fourth annual “Go Digital” automotive leather event.
Building on the previous editions’ themes of digitalization of manufacturing processes and the adoption of Industry 4.0 principles, this year’s presentations focused on the value creation enabled by leveraging manufacturing data. A showcase for the innovative applications Lectra is developing based on Industry 4.0 principles, the company’s trade gathering demonstrated how disruptive new technologies are enhancing the onboard experience while reorganizing the automotive interiors supply chain.

Several guest speakers provided insight into the ways industry megatrends are impacting the automotive cockpit of the future. As motorized vehicles become increasingly autonomous, connected and electrified, cementing their place in the shared mobility landscape, suppliers must now devise new strategies to achieve profitable growth. Traditional business models are losing ground to cross-functional collaboration partnerships, making it even more challenging to compete in the fast-moving connected, shared economy.
“It is disruptive for the entire automotive supply chain,” remarks Nathalie Saint Martin, Vice President, Group Purchasing, Faurecia. “We are all learning to evolve together and enhance the added value to our end-customers. The level of collaboration we are now seeing among suppliers is unprecedented.”

Other keynote speeches included market research consultancy Frost & Sullivan’s analysis of automotive trends in the data-driven economy, Testing, Inspection and Certification (TIC) specialist Bureau Veritas’ vision of data protection for automotive and a presentation of industry insights firm WardsAuto’s selection of top 10 best vehicle interiors of 2018.
The event enables a diverse array of supply chain players in automotive interiors to gather with their peers. "Events like this one are a great opportunity to talk face-to-face with other suppliers about industry-wide challenges,” notes Claus Lattner, Director Engineering, Process Management, CoC Cut Sew Wrap Global, Yanfeng Automotive Interiors. “It is not often we find ourselves in the same room to talk about consumer perception and the sustainability of leather, for instance."

“The event provided a great opportunity to interact with suppliers who have a direct impact on innovation in interior design and manufacturing,” said John Sousanis, Managing Director of Wards Intelligence.
For Javier Garcia, Senior Vice-President, Automotive Sales, Lectra, bringing together the automotive leather community is especially important as it rises to new business challenges stemming from continually changing consumer habits and the digitalization of manufacturing processes. “Connectivity and occupant comfort are increasing the amount of high-tech content in automotive interiors, but the up-market appeal of leather makes it a constant,” states Javier Garcia. “By fostering exchange, Lectra is doing its part to help the automotive leather ecosystem evolve to meet new consumer expectations.”