From the Sector

Archroma, a global leader in specialty chemicals towards sustainable solutions, has been recently ranked number 1 in the “industrial chemicals” list published by the Institute of Public & Environmental Affairs (IPE) for driving transparency in their supply chain.

Archroma also entered the Top 50 of companies in IPE’s Green Supply Chain CITI Evaluation, at the 47th position. The evaluation dynamically assesses brands on the environmental management of their supply chains in China.

With a wide array of products used every day, everywhere, the company is committed to operate along the principles of “The Archroma Way to a Sustainable World: Safe, efficient, enhanced, it’s our nature”. The Archroma team is therefore committed to sourcing safe and sustainable raw materials and intermediates from like-minded partners.

Heike van de Kerkhof, CEO of Archroma, recently delivered a message at the IPE 2020 Green Supply Chain Forum online, and commented: “As industry leader, we have the responsibility to keep on addressing the climate challenge, and to do everything we can together to reduce our impact on the environment. This is where the approach of the Institute of Public & Environmental Affairs supports us. They encourage us to challenge our suppliers in terms of safety, health and environment, and to go even beyond our own strict policies and processes.”

Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced the release of its third Sustainability Report.

Prepared again in accordance with the Global Reporting Initiative (GRI) standards, and covering Fiscal Year 2019, the report outlines the company’s progress on its priority sustainability topics, such as human health and environmental safety, resource efficiency, sustainable sourcing and product stewardship, as well as diversity & inclusion, and talent management.

All activities described in the report support the 3 pillars of “The Archroma Way to a Sustainable World: Safe, efficient, enhanced. It’s our nature." This approach is the company’s guiding light in challenging the status quo to making its operations and its value chains sustainable.

“As our industries navigate through the COVID-19 pandemic, the temptation for some will be to push back on the urgent need to address the climate crisis. We cannot allow that. Because after all, it's our nature”, Heike van de Kerkhof, CEO of Archroma, comments.

The report can be downloaded here.

• Technology webtalk on sustainable denim production

The next VDMA technology webtalk is scheduled for 12th November 2020 (2 pm - 4 pm CET). The topic will be “Sustainable denim production: latest finishing technologies”.

The presenters and their topics at a glance:

Volker Kunzmann, FONG’S EUROPE, will present highly efficient and innovative wet finishing solutions for denim by combining modular systems adapted to the product and customer’s and local specifications.

Hans Wroblowski, A. Monforts Textilmaschinen, will speak about advanced denim finishing technologies with a focus on ecological and economical energy consumption. Furthermore, a new yarn dyeing process will be presented.

Dr. Jürgen Thoms, PLEVA, will present online measuring and control devices for sustainable and cost-effective denim finishing. Latest technologies in straightening, preskewing, moisture management and quality reporting are shown.

After the presentations, the three experts will be available to answer the participants' questions. Free registration is still possible.

• Sateri pledges to Be World’s Leading Net-Positive Fibre Producer

Sateri, one of the world’s largest viscose producer, has launched its sustainability vision for 2030 to guide the company’s strategic growth in the coming decade. The Vision is anchored around four key pillars in response to environmental and social challenges faced by the cellulosic fibre industry: Climate and Ecosystem Protection, Closed Loop Production, Innovation and Circularity, and Inclusive Growth.

The Vision comes with a time-bound roadmap and measurable targets. It encompasses notable targets including net-zero carbon emissions by 2050, achieving 98% Sulphur recovery rate at all its mills by 2025, utilising textile waste and produce viscose products with 50% recycled content by 2025 and 100% by 2030, and supporting more than 300,000 local families and smallholder farmers to develop sustainable livelihoods.

Highlighting the significance of the Vision to the company, Sateri’s President Allen Zhang said, “As a raw material supplier, Sateri will do our part and respond to the urgent need to decouple growth from further resource impact. This is something that will underpin our growth, in addition to QPC (Quality, Productivity, Cost) and continuous improvement which are well-embedded in the company.”*

Sateri’s 2030 Vision was conceived after months of discussions with management members and external stakeholders including customers, brands and NGOs. The process was facilitated by BSR, a sustainability consultancy, led by its Asia Pacific Vice President, Jeremy Prepscius.

“The challenges facing the garment industry require all value chain participants to invest, innovate and integrate sustainability into their business models. This requires leadership and alignment and will need determination to succeed, which is what Sateri is striving to do,” said Prepscius.*

In the coming months, Sateri will form workgroups to develop action plans to deliver on the identified targets. Progress towards realising Sateri 2030 Vision will be reported in the company’s annual sustainability report and online sustainability dashboard.

Read more about Sateri 2030 Vision: www.sateri.com/sustainability/vision2030/

*Please see attached document for more information

• Significant recovery in order intake in third quarter 2020
• Order intake of CHF 425.1 million after nine months
• COVID crisis management in place
• Continuous implementation of the strategy
• Outlook 2020

The market recovery, which Rieter reported in June 2020, has continued. This is reflected in capacity utilization at spinning mills worldwide, which Rieter monitors. In April 2020, the proportion of producing spinning mills was around 40% while at the end of September 2020 this was around 90%. Against this backdrop, the Rieter Group increased order intake in the third quarter of 2020 to CHF 174.4 million (2nd quarter 2020: CHF 45.7 million). In the first nine months of 2020, the Rieter Group achieved a cumulative order intake of CHF 425.1 million (2019: CHF 524.5 million). Compared to the previous year period, this represents a decline of 19%.

Order Intake by Business Group

Due to the positive development in the third quarter of 2020, order intake at the Business Group Machines & Systems reached a total of CHF 234.5 million in the first nine months. The reason for the relatively small decline of 8% compared to the previous year is that the new machinery business was already characterized by investment restraint in the first three quarters of the year 2019. The Business Group Components recorded a reduction of 33% to CHF 116.6 million while the Business Group After Sales posted an order intake of CHF 74.0 million, a decrease of 23%. This illustrates the effects of low capacity utilization at the spinning mills, especially in the second quarter of 2020 as a result of the COVID-19 pandemic. The order backlog as of September 30, 2020, was around CHF 515 million (September 30, 2019: CHF 285 million). Cancellations were in the normal range of around 5%.

COVID Crisis Management in Place

Rieter has quickly implemented comprehensive COVID crisis management. Priority is being given to protecting employees, fulfilling customer commitments and ensuring liquidity. The necessary measures to protect employees have been implemented worldwide and the order backlog is being processed largely as planned. Rieter has introduced 40% short-time working in Switzerland and Germany for the second half of 2020. Similar measures were implemented worldwide within the scope of the available legal options. As of September 30, 2020, Rieter had liquid funds of CHF 216.7 million and unused credit lines in the mid three-digit million range in order to ensure liquidity. At the end of September 2020, net debt of CHF 1.2 million was disclosed.

Continuous Implementation of the Strategy

In recent years, Rieter has consistently implemented the strategy with the focus on innovation leadership, strengthening the business on the installed base and optimization of the costs. The company intends to forge ahead with the strategy in the coming months in order to strengthen the market position for the time after the COVID-19 pandemic. The Rieter CAMPUS is an important element of Rieter’s innovation strategy. Depending on the business situation, construction work is due to begin in the first half of 2021.

Outlook 2020

As already announced, in terms of sales and profitability Rieter expects a stronger second half of the year compared to the first half of 2020. Nevertheless, due to the deferral of deliveries by customers, Rieter will also conclude the second half of the year − and thus the full year 2020 − with a net loss. Due to the existing uncertainties, it continues to be difficult to forecast sales and profitability for the second half of 2020. For this reason, Rieter refrains from providing more specific information for the full year 2020.

In order to ensure the transfer of know-how and technology in times of the pandemic, the Manmade Fibers segment of the Swiss Oerlikon Group will start its new webinar series in November. Four interesting technology lectures are planned until the end of 2020 which will be held in English. Current trends in the production of manmade fibers as well as Oerlikons technology solutions will be presented and discussed with the participants. A continuation of the webinar series is already planned for 2021.

• Factory know-how from a single source – A boost for your efficiency
  4. November 2020: 11:00-11:45h CET
  Speaker: Jochen Adler, Oerlikon Manmade Fibers CTO*
   
• VarioFil – Your compact spinning solution
  11. November 2020: 11:00-11:45h CET
  Speaker: Ralf Morgenroth, Head of Engineering Textile Machinery BB Engineering (BBE)*
   
• Green Technologies – Join us on the road to a sustainable fiber industry
  2. December 2020: 11:00-11:45h CET
  Speaker: Markus Reichwein, Head of Product Management Oerlikon Manmade Fibers*
   
• VacuFil – Your future upcycling plant, from waste to value
  9. December 2020: 11:00-11:45h CET
  Speaker: Matthias Schmitz, Head of Engineering Recycling Technology, BB Engineering (BBE)*

*Please read the attached document for more information

Mountains of waste, plastic-infested oceans, negative CO2 footprints – the need for more sustainable ways of living has never been more urgent. Consequently, it is logical that recycling solutions are becoming increasingly important within the textile industry. This was also tapped into at the first virtual Global Fiber Congress in Dornbirn with a session that focused specifically on the topic. In front of around 400 participants, Markus Reichwein, Head of Product Management at Oerlikon Barmag, also spoke about solutions currently on the market.

As one of only manufactureres, the Oerlikon Group’s Manmade Fibers segment offers the entire mechanical recycling chain –from preparing the recycled materials, producing the melt all the way through to the textured package. Here, the company utilizes the VacuFil solution supplied by its subsidiary Barmag Brückner Engineering (BBE) –which, in addition to mastering bottle-to-bottle and bottle-to-textile processes, is also able to process textile waste into chips. This permits the running of textile production operations very much in line with the zero-waste philosophy.

VacuFil ensures a stable process in the case of recycled quality yarns
The reliable removal of contaminants is vital for a stable and efficient spinning process and outstanding yarn quality. At the same time, stable operating conditions with minimal fluctuations are essential. The greatest challenge here is the differing qualities of the bottle flakes fed into the system, as the extrusion process is barely able to balance these fluctuations. Here, the VacuFil concept counters with blending silos, which reduce the differences in the viscosity of the polymers considerably and guarantee high yarn and fabric quality.

The VacuFil concept is installed upstream to an Oerlikon Barmag POY system, which transforms the recycled melt into filament yarn of the accustomed high quality. As texturing solutions, Oerlikon Barmag offers its state-of-the-art automatic eAFK-series systems, including the latest generation of the eAFK Evo, which was unveiled at the ITMA Barcelona last year. Yarn manufacturers wishing to continue texturing manually can use the eFK series.

With the VarioFil R+, producers of smaller batches now also have a compact system with an integrated recycled materials preparation unit at their disposal. The system offers a special extrusion system for bottle flake materials, the very latest metering and mixing technology for spin-dying and expanded 2-stage melt filtration. The four spinning positions are each equipped with an Oerlikon Barmag 10-end WINGS POY winder.

While mechanical recycling has already been extensively developed, chemical recycling for mixed fabrics is still presenting the textile industry with huge challenges. The Oerlikon Group’s Manmade Fibers segment is currently working on solutions and concepts for transforming these fabrics into new textiles.

• Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity

ST. LOUIS - Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.
For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil  repellents, flame retardants and more.

These systems enable fabric producers to significantly reduce chemical and water consumption, while speeding up production times and eliminating production steps, including drying and bath changeovers when switching fabric colors. “Our customers are major manufacturers in fabric dying, finishing and remoistening, and we want to provide outstanding service and support—even in times like this,” said Rick Stanford, Business Development Leader at Baldwin and the commercial leader of the US installations. “Not only does our precision spray technology enhance productivity in their process, but there is also zero waste, which goes hand-in-hand with the increased sustainability focus in the textile industry.”

In North Carolina, two new TexCoat G4 precision spray systems are now in production with major international vertical manufacturers of outdoor living, performance fabrics and automotive fabrics. In Georgia, a major vertical manufacturer of workwear and protective fabrics installed a sanfor precision spray system, which has helped the customer obtain deeper penetration of moisture into fabrics treated with durable water repellents. In Turkey, three new TexCoat G4 systems were installed in Çorlu, northwest of Istanbul, for a large producer of knit fabrics, such as T-shirts. “In Turkey, the manufacturer purchased and installed one TexCoat G4 system before COVID-19, and the customer was so pleased with the results that, during the pandemic, three more were purchased,” said Simone Morellini, Sales Manager- EMEAR at Baldwin and the commercial leader of the Turkish installations. “The systems were manufactured and installed during the lockdown, and now, all four systems are up and running, and being used heavily on a daily basis.” “With the success we have seen, we plan to apply the same strategies for upcoming installations, including the next one in Honduras: strong local management and customer coordination, combined with  effective remote support during the installation,” said Stanford.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced that the 4,320 color references of its Color Atlas library have been selected by Shima Seiki and integrated into their ‘SDS-ONE APEX’ series of software for the design, planning and virtual sampling of textile and apparel.

Shima Seiki is a leading provider of digitally optimized solutions for the fashion industry, who combines its on-demand ‘WHOLEGARMENT’ knitting machine with realistic virtual sampling. Based on actual yarn data, fabric simulations generated on the SDS-ONE APEX-series are unparalleled in quality and realism. Design and simulation are available for knits and various other textile applications, and smooth transition to machine programming is possible for quick and accurate design-to-manufacture interface.

That is where the Color Atlas by Archroma® will considerably benefit to the users of Shima Seiki’s solutions.

The Color Atlas was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

The Color Atlas continues to evolve in line with Archroma’s commitment to sustainability through innovation. The company describes it as “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”. All color references available in the Color Atlas have been formulated with products that comply with leading international eco-standards, and can be selected based on the desired sustainability profile.

Today, the Color Atlas contains 4,320 colors applicable on cotton poplin, almost the double compared to similar tools available to textile and fashion specialists. Technical support is available to designer, manufacturers, as well as brands and retailers, through Archroma’s global offices - for every single color from its selection to its implementation in production. Engineered color standards empowered by NFC technology are also available for all colors and reproducible in production.

With this new collaboration, the users of the SDS-ONE APEX design software of Shima Seiki will have at their disposal 4320 colors that they can visualize, evaluate and implement, in a considerably accelerated process from the first creative idea to the production to the final outlet, whether online or in brick-and-mortar shops.

“Accurate color evaluation and communication are very important issues for design work”, explains Hideya Ohtani, General Manager, Graphic System Development Division, at Shima Seiki. “We have high expectations for Archroma's Color Atlas to help our APEX series users develop their products in an even more smooth and accurate manner.“

“We are proud to bring our Color Atlas library to the users of Shima Seiki’s extremely advanced design software,” says Chris Hipps, Head of Co lor Management Services, at the Archroma Brand Studio. “Designers and users of the software will have at their disposal not only color options they never had before but also colors that they can trust will be implementable right away. That’s what we strive to do at Archroma: create a new way of working: safe, efficient and enhanced. It’s our nature!”

For more than 50 years, vehicle manufacturers have relied within their model development on Autoneum’s measuring systems for vehicle acoustics. With ATLAS, Autoneum has now added another particularly powerful device to the portfolio: Thanks to the efficient and reliable measurement methodology, noise-reducing vehicle components and materials can be analyzed and developed faster and with a significantly lower need for resources in the future.

With the ongoing electrification of vehicles and trends like autonomous driving, future car generations will no longer be used solely for transport – remote working and recreation will equally play a key role. This requires a vehicle interior that is as noiseless as possible. In order to identify and insulate potential internal and external sound sources already in the pre-development of new models, car manufacturers around the world rely on Autoneum’s highly specialized measurement tools. The newly launched ATLAS – short for “Airborne Transmission Loss Analysis System” – measures the acoustic insulation and transmission loss of components such as carpets, inner dashes and floor insulators. This allows customers to assess noise-reducing parts within minutes and select acoustic components tailored to their needs.

ATLAS sets new testing standards in this regard. While developers previously had to analyze the NVH behavior (noise, vibration, harshness) of interior parts using material samples of around one square meter in size, ATLAS makes this process faster, cheaper and more environmentally-friendly. It enables measurements of small samples with a diameter of no more than ten centimeters, which substantially decreases the amount of material used. Thanks to its four highly sensitive microphones, only two trials are required to collect precise and valid test data, making the system developed at Autoneum’s research center in the Swiss city of Winterthur especially suitable for quality assurance and repeatability of the results obtained. Users also benefit from time savings of up to 50 percent compared to the previous testing standard.

Autoneum’s measurement systems represent the global industry standard and are used successfully by vehicle manufacturers, automotive suppliers and research institutions alike. The Company is therefore not only making a significant contribution to the mobility of the future with its noise-reducing products, but now with ATLAS as well.