From the Sector

Because aircraft engine noise contributes to environmental noise around airports and populated cities, the aerospace industry has been working on new aircraft designs that will emit less noise so they can meet the ever-increasing requirements imposed on the industry to reduce noise pollution. Shielding and absorbing aircraft engine noise at the source represents one of the most effective ways to address this issue.

Hexcel, a global leader in advanced composite technology, has been at the forefront of acoustic technology development with its Acousti-Cap® broadband sound-reducing honeycomb, which enables engine designers to reduce the noise from takeoffs and landings yet without adding significant weight to the aircraft.
 
“Hexcel has continued investing in the evolution of Acousti-Cap® product technology to improve performance and reduce cost,” said Imad Atallah, Group Product Manager for Honeycomb at Hexcel. “Collaboration with industry leaders, including NASA and Boeing, has been key to that development,” he added.
 
The 2DOF (Two Degrees of Freedom) honeycomb core acoustic liner was introduced in 2008 and was subsequently adopted and installed on the Boeing 787 Dreamliner inlet, the Boeing 747-8 inlet and transcowl, and more recently on the Boeing 737 MAX inlet. This success enabled continued technology development and evolution in MDOF (Multi-Degrees of Freedom) where the acoustic septum is inserted in the honeycomb cell at different heights, as well as having two septums in honeycomb chambers. This type of technology allows for improved acoustic attenuation at a broader frequency range, as well as increased absorption.
 
“Hexcel’s Acousti-Cap® technology has shown great performance benefits over competing technologies from the beginning” said Clark Smith, Director of Technology -- Core Products at Hexcel. “We have continued to improve the technology through taking advantage of the single cell treatment concept, by adding capability that the industry was looking for,” he added.   
 
Hexcel’s latest Acousti-Cap® technology was recently tested in a joint NASA-Boeing flight test on a B737 MAX test platform, and the results beat expectations as reported by Aviation Week. Collaboration between Hexcel and NASA over several years on the development of MDOF technology led to the successful test results on this latest flight test.
 
The ability to attenuate a broader noise frequency range and increase acoustic absorption with the Hexcel liner has allowed an optimized design of the overall inlet that reduces drag and improves noise attenuation. Hexcel continues to invest in acoustic liner technology and is proud of the positive results of this NASA-Boeing flight test.

Cinte Techtextil China opens its doors next week, with around 480 exhibitors from 22 countries and regions preparing for another successful showcase of the world’s leading textile innovations. Leading international and domestic brands will feature in halls N1 – N3 at Shanghai New International Expo Centre from 4 – 6 September, making Cinte Techtextil the ideal place to make connections and gain insight into Chinese and Asian market trends.

The technical textile industry in the Asia region, and China in particular, has been growing steadily and is predicted to continue doing so. China’s total output of technical textiles and nonwoven products is estimated to account for 30% of global production by 2020, and double that of 2013. This high potential for growth, achieved through investments worth billions of dollars, has drawn attention from European exhibitors, who are set to travel to the region for Cinte Techtextil.

This year’s European Zone will feature around 30 exhibitors from countries including Austria, France, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, Germany and Italy. In addition to this, the Czech Republic will present its debut pavilion, showcasing exhibitors with solutions for technical yarn, fabric processing and nonwoven fabrics.

In addition to this, exhibitors from 12 more countries and regions will present their latest innovations to the market. These include domestic and international exhibitors from China, Hong Kong, India, Indonesia, Israel, Japan, Korea, Saudi Arabia, Taiwan, Thailand, Turkey and the US.

Belt and Road: a success story for Buildtech
Following higher regulations and quality standards that aim to exceed Western levels, demand is high in China for production machinery. What’s more, with the national nonwovens market displaying particularly fast growth, Cinte Techtextil has attracted some of the world’s leading nonwoven and weaving machinery brands.

The fair will showcase leading global exhibitors across 12 application areas. Two areas to watch out for include Buildtech and Mobiltech, which are both performing well in Asia and specifically in China. The Belt and Road initiative brings Buildtech a great deal of benefits through China’s enormous investments in global infrastructure. Adding to this, China’s automobile production has been increasing 3% year-on-year, with particularly high growth seen in new-energy vehicles, SUVs and commercial vehicles. China has become the world’s largest auto producer, and this has been boosting progress in the Mobiltech category.

Cinte Techtextil fringe programme a hub of industry insight
A comprehensive fringe programme will keep Cinte Techtextil fairgoers up to date with industry news, with standout events including the 7th China International Nonwovens Conference. Focusing on the global nonwovens industry, topic highlights include the latest innovations in China’s nonwovens industry, an insight into the North American nonwovens market, future trends in the global hygiene product market, and more. The conference will also discuss innovations and developments in filter materials and the wipe industry.

The first day of the fringe programme will see a panel discussion in hall N1, moderated by the Taiwan Technical Textiles Association (TTTA), with confirmed panellists including DuPont, IBENA Textilwerke and SGS-CSTC Standards Technical Services. The panel will focus on current trends, developments and standards in the protective textile industry.

Other fringe programme events will include seminars and product presentations led by industry leaders on the latest global technologies and market trends, and an Innovation Showcase Area in a variety of application categories. 

This September’s Cinte Techtextil China will once again provide a strong barometer of the state of the global technical textiles industry, and in particular which sectors in Asia as a whole, and China specifically, are performing well. Two of these for certain are Buildtech and Mobiltech, with a number of leading global and Chinese brands exhibiting to eager buyers from these sectors.

Cinte Techtextil China is Asia’s leading biennial fair for the technical textiles and nonwovens sector, and will feature an expected 500-plus total exhibitors from around 20 countries & regions from 4 – 6 September. The fair offers products and technologies for 12 application areas* which cover the entire industry.

Buildtech benefits from Belt & Road and other infrastructure investment

With a huge boom in national and regional infrastructure projects, the market for Buildtech products, especially geotextiles and construction textiles, is rapidly expanding. In particular, the government’s global Belt & Road project, as well as continued investment at home in highways, high-speed rail and more, is fuelling this expansion. According to CNITA, in 2017 China started 35 new railway projects, with additional private capital investment in this sector totalling some USD 53 billion that year. The same investment in highway construction increased 17.7%, while water conservation project investment by private firms reached a new record of USD 105 billion.

With this potential in the Asian market, it’s no surprise a number of new exhibitors will feature in the Buildtech sector at the fair, including FPC Technical Textile from Saudi Arabia, Kobe-cz from the Czech Republic, as well as Lenzing Plastics, while Johns Manville are one of the returning exhibitors this year.

• FPC Technical Textile (Saudi Arabia) produce high-end specialty fabrics including PVC coated fabrics and fibre glass PTFE fabrics, and will focus on the latter at the fair.
• Kobe-cz (Czech Republic) will showcase their nonwoven fabrics, mainly from glass fibre with temperature resistance up to 800°C.
• Exhibiting for the first time at the fair with their Plastics division, Lenzing (Austria) will feature their technical laminates for building industries, roofing membranes, vapour barriers, isolation facings and barrier packaging, as well as PROFILEN® PTFE yarns, films and fibres at Cinte Techtextil.
• Johns Manville’s (US) products on offer include polyester spunbond, PP & PBT meltblown, glass fibre nonwovens, micro glass fibre nonwovens, hybrid nonwovens, glass fibre needle mat and glass microfibers.

Mobiltech benefits from huge increases in automobile production in China

With new textile innovations and application possibilities spreading throughout the automobile industry, coupled with the fact China is the world’s largest auto producer, Cinte Techtextil is the place to see the latest products and technologies for this sector this September. Automobile production in China reached 29 million units in 2017, an increase of 3% year-on-year. Staggeringly, new-energy vehicle production grew by 53% last year, while SUVs and commercial vehicles increased 13.81% and 13.95% respectively.

With such strong growth in China, a number of leading international Mobiltech producers, as well as top domestic suppliers, will be at Cinte Techtextil this year, including:

• Abifor (Switzerland): their focus at the fair is on products designed for automotive, construction and other technical applications, in particular their specialty hot-melt powders. The company has its own production unit in Shanghai, and reports that an increasing number of domestic customers are starting to focus on more sophisticated products.
• SKS Group (Sweden): will showcase high performance single end yarn for automotive and industrial hoses, and single end cord for automotive and industrial belts.
• Swisstulle (Switzerland): will have a range of products on offer for automotive, rail and aviation uses, including sunshade materials, nets, tube reinforcements and new possibilities for luggage compartment covers.
• Windel Textile Far East (Germany): with production undertaken in China, this German firm offers textile greige, half-done and finished materials. They offer nonwoven, knitted and woven fabrics (substrates), and glass fibre solutions. At the fair, they will showcase substrates for adhesive tapes / wire harnessing tapes, and Maliwatt- and coagulated microfibre fleece for covering vehicle interiors.
• Protechnic (France): they will feature hot melt thermoadhesive nets, webs and films, as well as laminating process in automotive and other industrial applications at Cinte 2018.
• Kuangda Technology Group (China): having supplied products for global brands such as Volkswagen and Audi, this Chinese supplier will offer automotive interiors, including interior fabrics, seat covers and cushions at the fair.
• Shanghai Shenda (ShanghaiTex Group) (China): specialising in automotive interior textiles, they manufacture a full range of products including grey car carpet, moulding car carpet, head liners (warp-knitting and nonwoven), seat belt, seat fabrics and more, and have supplied the likes of Mercedes-Benz, BMW, Volkswagen and GM.

Cinte Techtextil China is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA). To find out more about the fair, please visit: www.techtextilchina.com.

Bally, the historic Swiss luxury brand is pleased to announce the appointment of two key figures to its executive team, completing the process of strategic redevelopment begun last year with the transfer of the Creative, Merchandising and Marketing offices from London to its new showroom in Milan.

Effective immediately, Eva Quirrenbach joins Bally as Chief Marketing Officer following a term in New York as Vice President of Global Brand Marketing at Tory Burch, having previously occupied strategic roles within the Tod’s Group in both Italy and the United States. Eva is a recognised expert in all aspects of international branding and marketing within the luxury sector, and with her proven understanding of consumer behaviour, she played an integral role in the development and acceleration of the digital footprint and in supporting global brand development at Tory Burch.

“Eva is an excellent addition to the Bally team. The combination of a consolidated experience and understanding of luxury brands along with her background driving the strategic development of successful global projects make her the ideal leader to drive Bally's commitment to unified commerce on a global level".
Frédéric De Narp, Bally Group CEO

Bally has moved to a three-pronged regional strategy and as such is also pleased to announce the promotion of Silvia Onofri to a new role as CEO for the EMEA region, in addition to her current role as Vice President of Global Wholesale. During her time in Bally, Silvia has obtained outstanding results entering top tier multi-brand doors around the world and increasing Bally's footprint in Travel Retail to make the brand a global leader in the field.

Silvia has extensive experience in the global fashion and luxury industry, having first joined the Bally team 10 years ago, following key marketing roles in Bulgari.

“Silvia has the unique benefit of intimately understanding the Bally brand and it’s DNA, and having proven experience in forging new relationships with the world’s leading retailers and their customers. With this invaluable expertise in hand, I am confident that she will infuse the EMEA Retail division with enthusiasm, professionalism and unique market insights to take Bally to the next level in these crucial markets” -
Frédéric De Narp.

The arrival of Eva Quirrenbach and the promotion of Silvia Onofri are part of Bally Group CEO Frédéric de Narp’s ongoing strategic vision to infuse Bally’s prestigious brand identity with heightened dynamism, appeal and allure.
Both roles report directly to Bally’s Group CEO, Frederic de Narp.

Asia’s largest biennial event for the entire technical textiles and nonwovens sector will feature some of the industry’s biggest overseas machinery brands. Held on the earlier date of 4 – 6 September this year, the fair will feature an expected 500-plus total exhibitors from around 20 countries & regions.

As the world’s largest producer of technical textiles and nonwovens, China’s demand for production machinery is insatiable. As such, this September’s Cinte Techtextil China has attracted some of the world’s leading machinery brands, particularly in the nonwovens and sewing machinery sectors, ensuring a wide range of sourcing options for both domestic and international buyers.

Overseas producers respond to strong Chinese demand
As the Chinese domestic and export markets’ demand for quality technical textiles and nonwovens products continues to increase, overseas machinery brands continue to enter the country, using Cinte Techtextil China as their starting-out platform. ANDRITZ Nonwoven is just one of those who see the growing potential. “Chinese nonwovens manufacturers are increasingly requiring higher capacities and top-class quality for their nonwovens products for local and export markets,” Mr Laurent Jallat explained. “China is the biggest market in terms of installed capacity, and shows quite promising potential for the future. In the past years, we’ve seen rapid growth in products such as disposable face masks.” ANDRITZ responds to this demand with their neXline spunlace eXcelle line which features state-of-the-art TT card web forming and JetlaceEssentiel hydro entanglement units for high capacity and speed.

The DiloGroup also report an increase in demand for their products in China. “China is one of our biggest markets,” explains Mr Dominik Foshag. “We have procured huge orders from China, as Chinese customers are considering German technology more frequently nowadays. The visitor quality of Cinte Techtextil has been very good in this past, and we think this year’s fair will be also successful as we know many of our customers are going to visit.”

Oerlikon will introduce its spunbond technology to the Chinese market this year, and is expecting to conclude initial contracts at the fair due to increased demand for overseas products. “The Chinese market for nonwovens products is by far the largest and fastest growing national market. Chinese manufacturers are no longer satisfied with lower product quality, but want to exceed Western quality levels, for example. The products must now meet stricter customer requirements and legal standards, some of which are significantly higher than other international standards,” Ms Lena Kachelmaier said.

Truetzschler Nonwovens has also noticed this trend. Ms Jutta Stehr commented: “In the last two or three years, China became one of the pacemakers in the field of nonwovens used in beauty, skin care and hygiene applications. Asian markets have set new standards concerning quality in nonwovens. For instance, making disposable wipes from cotton fibres is a trend originating in Asia. The luxurious feeling of cotton combined with the requirement for eco-friendly products will further drive demand in China and elsewhere. Accordingly, Truetzschler Nonwovens anticipates more inquiries at Cinte Techtextil for its proven carding and spunlacing solutions for cotton nonwovens.”

Weaving machine supplier Itema has also noticed strong demand in China for products made in Italy. “Generally speaking, and especially for technical fabrics, imported machinery is highly evaluated and appreciated by Chinese customers. In recent years, Itema experienced significant growth in the sale of its Made-in-Italy weaving machines in China, and in other APAC countries. Imported machines are synonymous with quality and reliability, and we believe this positive trend will be constant in the future,” Mr Matteo De Micheli outlined.

Weaving machinery exhibitor highlights

• ANDRITZ Nonwoven: their specialty is technologies for drylaid, wetlaid, spunbond, spunlace, needlepunch and textile calendering. At Cinte Techtextil, they will highlight their aXcess product portfolio, which has been especially designed for medium-capacity production. ANDRITZ has developed this range to fit the demands of producers with medium-capacity requirements, particularly in emerging markets. It includes lines and individual machines for needlepunch, spunlace, wetlaid and calendering processes.
• Autefa Solutions: visitors to their booth will experience the company’s expertise as a full line supplier for carded- crosslapped needlepunch lines, aerodynamic web forming technology, spunlace and thermobonding lines. Their nonwovens lines meet customers’ requirements for quality web formation, bonding, active weight regulation and minimal maintenance.
• DILO Systems: a leader in the field of staple fibre nonwoven production lines, DiloGroup will present their latest developments at the fair, including staple fibre production lines, card feeding and cards and crosslappers & needlelooms.
• Oerlikon: they will showcase spunbond solution lines for the production of polypropylene geotextiles. According to the company, spunbond geotextile applications are on the rise as the market is increasingly demanding more efficient processes and products, which means the product requirements are often the same or greater, but with a lower raw material input. Spunbonds are progressively replacing classical carded nonwovens due to their technical and commercial benefits.
• Truetzschler Nonwovens: concentrating on solutions for producing a broad range of hygiene nonwovens including wipes at the fair, they will focus on thermobonding & spunlacing processes and the respective machinery, from fibre preparation down to winding.

Sewing machinery exhibitor highlights

• Itema: making their debut at Cinte Techtextil, they are a leading supplier of weaving machines for technical fabrics production. According to the company, they are the only weaving machine producer to offer technical textile manufacturers the top three technologies for weft insertion: Rapier, Projectile and Airjet.
• Picanol: they use their leading position as producers of weaving machines for other textile products to expand into machines for woven technical textiles by investing heavily in state-of-the-art technology, as well through the modular design of their machine platforms which allow them to serve different industry sectors effectively.
• Lindauer Dornier: featuring in the German Pavilion this edition, they offer a number of weaving machine varieties including rapier, air-jet, open reed weave (ORW) and more. Their rapier weaving machines have set the technological standard in the high quality wool textiles market for decades, and this quality will be on display at their booth with the DORNIER P1 rapier weaving machine.

Domestic brands to watch out for

In addition to these leading overseas brands, a strong line-up of Chinese machinery producers will also feature at the fair, including Changshu Weicheng Non-Woven Equipment and Shijiazhuang Textile Machinery.

Archroma, a global leader in color and specialty chemicals, will be presenting its innovative and sustainable denim solutions for manufacturers and brands at DenimsandJeans Vietnam 2018, on June 27 and 28.
From fiber to finish, Archroma offers a scope of possibilities for effects and colors, from the authentic roots of indigo to the most innovative and eco-advanced solutions. Archroma is a recognized leader in integrated solutions, offering best-in-class auxiliaries for bespoke process packages.
Visitors will be able to discover solutions designed to make denim in a more sustainable and responsible way, in particular:
DENISOL®, BRINGING INDIGO BACK TO ITS ROOTS - NOW ANILINE-FREE*
Archroma’s Denisol® range is a newly developed pre-reduced liquid indigo solution that is manufactured in Archroma’s award winning ‘zero liquid discharge’ manufacturing plant in Pakistan.

• Denisol® Indigo 30 liq is compliant with major official eco-standards and requirements from retailers, brands and fashion leading companies and helps to produce fabrics suitable for current eco-labeling such as bluesign® and GOTS.
• Responding to demands for a non-toxic alternative to the dyes that are used for the iconic and traditional indigo blue that consumers associate with denim and jeans, Archroma just announced the upcoming new Denisol® Pure Indigo 30.

ADVANCED DENIM, TOWARDS WATERLESS DENIM DYEING
Consider this: The water needed to produce one pair of jeans is said to be ~ 11'000 liters(1). With approximately 167 million pairs of jeans produced monthly(2), that is 1,837,000,000,000 liters of water consumed every month in the process! Based on the Denim-Ox and Pad/Sizing-Ox dyeing processes, Archroma’s multi-awarded ADVANCED DENIM, dyeing technology allows savings of up to 92% in water, 87% in cotton waste and 30% in energy, compared to a conventional denim dyeing process.
The technology has been adopted by brands like Patagonia and received the prestigious 2012 ICIS Innovation Award and Innovation with Best Environmental Benefit Award.

• Optisul® C, “soft colors” made easy
  Colors other than blue have been tricky to achieve in the past. With Optisul® C dyes, denim manufacturers can expand their color horizons with this range of six dyes especially designed to produce soft denim colors in continuous dyeing processes, as well as on coating and printing. Optisul® C affinity-free, sulfide-free dyes can easily be combined with each other to create garments suitable for wash-down treatments in a wide array of easily achievable and reproducible soft colors. They are suitable for GOTS and bluesign® approval.
• Diresul® RDT Ocean Blues, ocean-themed bright sulfur blue dyes
  Archroma’s Diresul® RDT Ocean Blues are a collection of vibrant, ocean-themed bright sulfur blue dyes. These best-in-class dyes and their auxiliaries bring out the best of indigo, improve workability, dyeing consistency and process safety.
  They can be combined with Denisol® Indigo 30 liq in bottoming/topping manufacturing routes for avant-garde blue styles. At the booth, Archroma will display an “illustration collection” of exciting indigo casts.
• Diresul® blacks & greys, a universe of greys and deep black and navies.
  Archroma’s dye portfolio of conventional and black Diresul® specialties allow to create a universe of greys and deep black and navies. From superficial to solid blacks for both extreme wash-down and stay black effects.

EARTHCOLORS, TRACEABLE FROM NATURE TO FASHION
As consumers increasingly aspire to functional, beautiful and meaningful clothing, brands and manufacturers are increasingly interested in the environmental impact of the denim industry. Archroma has placed sustainability at the heart of its innovation process to create products and processes that improve the industry’s sustainability.
The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
The EarthColors allow to produce the earth tones that are coming strong: red, brown and green colors. They have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.

SOLUTION PACKAGES FOR SUSTAINABILITY
Brand owners and retailers around the world are taking action to evaluate the environmental impact of textile treatment, dyeing and finishing processes in response to consumer concerns.

Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.
Archroma’s portfolio of ZDHC MRSL-compliant chemicals and dyes is integrated into the ONE WAY calculation tool since 2013.
“Innovation and sustainability go hand in hand,” says Paul O’Prey, Head of Sales, Brand & Performance Textile Specialties, Archroma, Vietnam. “While developing new products and services, we always consider the environmental impact so they are as sustainable as possible. This can be seen in our innovative and eco-advance products, such as the water-saving ADVANCED DENIM and the aniline-free* Denisol® Pure Indigo.”

Koch Membrane Systems, Inc. (Koch), a global leader in membrane filtration technologies, announced its PURON® Membrane Bio-Reactor (MBR) modules have been selected for the Ji’nan Wastewater Treatment Plant I and Plant II Expansion Project. Each plant will have 100,000 m3/day treating capacity. The site is located in the Shandong province, which is China’s second-most populated province, with over 100 million people. This project continues the strong presence of Koch’s PURON® MBR in various municipal and industrial wastewater treatment projects in China, demonstrating exceptional performance and creating value to clients.

Strict new discharge requirements by the Chinese government are forcing municipalities to upgrade or build their wastewater treatment plants using new technologies. PURON® MBR technology was selected for these two new plants for its reliable and consistent effluent quality, adherence to new discharge limits, and reduced footprint compared to conventional wastewater treatment technology.

These wastewater treatment plants will be built and operated by China Everbright Water Limited Co. Ltd, a company principally engaged in construction and operation of integrated environmental water services. The project is expected to be commissioned by the end of 2018.

“We have had good experience with Koch Membrane Systems PURON® MBR technology in the 55,000 m3/day Beijing Daxing Tiantanghe Waste Water Treatment Project,” said Mr. Wang Huailin, president of Jiangsu Kaimi Membrane Technology Co. Ltd, who will design, build and supply the membrane system for these plants. “Since the 2016 Beijing plant startup, the PURON® membranes have been used in an underground construction model to provide a pollution-free installation. We have been impressed with the low fouling and low operating costs from the PURON® product, due to its unique single header and central aeration design features and the process expertise Koch brings to the table.”

“Koch has developed advanced membrane solutions for the municipal and industrial market segments,” said Mr. Manny Singh, president of Koch Membrane Systems. “Unique features of our PURON® product help the market treat wastewater to meet strict discharge and reuse targets with a low cost of ownership. We are excited that Everbright Water Group recognized the benefits of our PURON® product in their existing plant and selected us for their flagship new projects.”

• Archroma joins hands with Lahore University of Engineering & Technology to foster innovative research in textiles

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals, announced it has signed a Memorandum of Understanding (MoU) with the University of Engineering & Technology (UET), Lahore, Pakistan. The MoU will pave way for cooperation initially for a five-year period.

The partnership will explore innovations in textile research with futuristic visualization for Pakistan to help the Pakistan textile industry to keep in line with the fast pace of global apparel requirements and evolutions. Both partners will jointly hold sessions to prepare students for the challenges of the textile industry through in-house training sessions, developmental projects, research in textile applications and process innovative methodologies by pioneering value additions. The students of UET will also be able to join internship placement programs at Archroma Center of Excellence at Karachi.

The MoU was officially signed at a ceremony recently held in Faisalabad by Prof. Dr. Fazal Ahmed Khalid, Vice Chancellor of UET and Mujtaba Rahim of CEO Archroma Pakistan Limited.

Speaking at the occasion, Mujtaba Rahim said: “We, at Archroma, believe in continuous improvement and challenging the status quo leading to enhance sustainable growth especially in our product lines creating value for our stakeholders. Through this initiative of mutual cooperation, we will be able to share latest knowledge and technical developments and to work together with the faculty and research team of UET. We also wish to share the innovative textile solutions of Archroma with the students enabling them to enhance their academic performance. Our MoU will go a long way in adding value in the fast growing textile segment, from education to R&D development.”

“This partnership is going to have far-reaching impact in textile research which will bear highly positive results for UET and Archroma. Our academic team has already collaborated with Archroma on projects that will have a far reaching impact on the textile industry. We are very enthusiastic about formalizing our mutual relationship and look forward to interesting research outcomes. Industrial liaison of students will create confidence and the training, internships and working sessions will benefit them in their career development,” Prof. Dr. Fazal Ahmed Khalid commented.

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals, announced the further integration of M. Dohmen, an international group specializing in the production of textile dyes and chemicals for the automotive, carpet and apparel sectors. This went into effect on May 1, 2018 and follows Archroma expanding its stake in M. Dohmen from 49% to 75% in September 2017.

The increased integration will be implemented in North America and Korea. In North America, 20 employees from M. Dohmen USA, Inc joined Archroma when the company merged into Archroma U.S. Inc. operations in the US and into Archroma Canada, Corporation in Canada.

In Korea, Archroma recently acquired 100% of the shares of M. Dohmen Korea Ltd. The company’s name has been changed to Archroma Korea Ltd on April 30, 2018, and its 75 employees will now work under the Archroma brand.

“The further integration of M. Dohmen into Archroma will enable us to strengthen our offerings to textile markets worldwide” explains Marcos Furrer, President Brand & Performance Textile Specialties and Innovation, Archroma. “Regardless of their location, our customers will continue to benefit from our broad and complementary product portfolios, our dedication to providing outstanding global customer service and our strong commitment to innovation and sustainability.”

Archroma recently acquired 100% of the shares of M. Dohmen Korea Ltd. The company’s name has been changed to Archroma Korea Ltd on April 30, 2018.
(Photo: Archroma)
ARCHPR116a

Archroma recently acquired 100% of the shares of M. Dohmen Korea Ltd. The company’s name has been changed to Archroma Korea Ltd on April 30, 2018. (Photo: Archroma)
ARCHPR116b

On May 1, 2018, M. Dohmen USA, Inc merged into Archroma U.S. Inc. operations in the US and into Archroma Canada, Corporation in Canada.
(Photo: Archroma)
ARCHPR116c

• Additives, pigments and masterbatches for transportation, packaging, textiles & fibers
• Support to “future-proof” medical applications
• Contributing towards more sustainable engineering plastics

Clariant, a world leader in specialty chemicals, turns the spotlight on its increasing on-the-ground support and innovation focus for North America’s four key plastics application segments at NPE 2018 Booth S18155.

Clariant is pushing forward with plans for growth in the region by advancing R&D competencies, and increasing its manufacturing footprint and technical capabilities across its 50+ sites, 3 R&D and 6 technical innovation centers. Clariant’s innovations for the plastics industry include advanced additives, masterbatches and pigments which support the packaging sector in engaging consumers via differentiated, convenient solutions. At NPE, it will also highlight solutions for enhancing and protecting healthcare products, as well as its contribution to stronger and colorful textiles and fibers for everything from e-mobility to industrial applications.

Deepak Parikh, president of region North America, Clariant comments: “Clariant’s product innovation for the US and wider North American plastics industry embraces the region’s fastest growing end-use areas of automotive and construction. It also addresses the impact of trends driven by changing consumer lifestyle preferences and market regulations on other important segments such as packaging and healthcare.”

Transportation
Clariant brings color and protection to support the increasing use of engineering plastics and high temperture resins in automotive interiors, exteriors and under-the-hood. Halogen-free Exolit® OP 1400 provides outstanding flame retardancy to polyamide parts, enhances safety with UL 94 V0 performance down to 0.4 mm and enables the molding of complex parts with no mold deposits and blooming. Exolit OP 1400 has been awarded the Clariant EcoTain®label for outstanding sustainability and performance. At the same time, Clariant offers low-halogen controlled high-performance PV Fast® pigmentswith excellent migration and weather fastness properties to meet the high requirements of today’s transportation and automotive industry. Easy processing Renol® compounds and masterbatches for engineering and high temperature resins provide heat and light stability, and flame retardancy, while maintaining critical flow properties in parts like SMT connectors. Importantly, they are available as small lots which enables customers to purchase only what they require and contribute to a reduction in their carbon footprint.

Packaging
As US packaging manufacturers explore more consumer-friendly, lighterweight and appealing solutions, Clariant is on hand to support their functionality, sustainability-related and color desires. Clariant Pigments has an innovative cooperation with Konica Minolta and matchmycolor to enable fast, precise and efficient color matching of HDPE products, using select organic PV Fast and Graphtol® pigments that comply with FDA regulations. The ColorWorks®center in Chicago is dedicated to US brand managers and designers with teams of color design experts to create color formulations faster than ever before for bottles, caps, closures and films.

According to market reports, plastic pouches are gaining share from traditional pack types in packaged food and are mainstream in home care. To support smoother and more environmentally-compatible processing especially for film applications, Clariant offers an FDA-compliant, vegetable-based powder amide wax, Licolub® FA 1, which acts as a slip and anti-block agent. It is suitable for polyolefins and PVC.

Textiles & Fiber
At NPE 2018, Clariant puts the focus on strong and colorful textiles, carpets and industrial fibers. New AddWorks® TFB 117 offers a number of benefits to help stabilize and smoothen fiber production processes, protect color, and improve heat stability and mechanical properties of fibers. AddWorks TFB 117 ensures smooth spinnability with less filaments breakage, even at low processing temperatures and at high speed spinning up to 5,500 m/min. Clariant also offers a broad range of colorants for polypropylene, polyester, polyamide and acrylic fibers, featuring migration fastness, chemical stability, light- and weather-fastness.

Healthcare
Clariant supports risk control and regulatory compliance for medical polymer and pharmaceutical packaging solutions. Its Mevopur® color and performance masterbatches and compounds include a USP Class 6 line of compliant products and multiple global ISO, 87, 88, and 661.1 certifications ahead of the market deadline. Clariant also offers selected FDA-compliant organic pigments and polymer soluble dyes that meet purity migration fastness as well as toxicological properties for medical devices and pharmaceutical packaging.