From the Sector

Emphasis on Process, Third-party Validation and Outcome-based Testing
Florida Linen Services has earned the Hygienically Clean Healthcare certification for its Rockledge plant, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.

The Hygienically Clean Healthcare certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively

To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and diminished presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.

This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.

Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations by verifying quality control procedures in linen, uniform and facility services operations related to the handling of textiles containing blood and other potentially infectious materials.

Certified laundries use processes, chemicals and BMPs acknowledged by the federal Centers for Disease Control and Prevention (CDC), Centers for Medicare and Medicaid Services, Association for the Advancement of Medical Instrumentation, American National Standards Institute and others. Introduced in 2012, Hygienically Clean Healthcare brought to North America the international cleanliness standards for healthcare linens and garments used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.

Objective experts in epidemiology, infection control, nursing and other healthcare professions work with Hygienically Clean launderers to ensure the certification continues to enforce the highest standards for producing clean healthcare textiles.

The Rockledge plant joins two other Florida Linen locations (Pompano Beach and Jensen Beach) that earned Hygienically Clean Healthcare Certifications in 2017. Florida Linen has provided healthcare laundry and linen services throughout Florida since 2003. “Congratulations to Florida Linen Services on their certification,” said Joseph Ricci, TRSA president and CEO. “This achievement proves their commitment to infection prevention and that their laundry takes every step possible to prevent human illness.”

• Unique, patented 3D printing process enables production of large-scale components
• First direct investment by BASF Venture Capital in a company in China

BASF Venture Capital GmbH is investing in Prismlab, a leading provider of 3D printing processes and 3D printers, headquartered in Shanghai, China. Prismlab has developed a patented printing process that is characterized by a very high printing speed, high level of precision and lower printing costs. BASF’s venture investment will enable Prismlab to further accelerate its product development and innovation while strengthening its market reach to the global market.

“This is our first direct investment in a Chinese company,” said Markus Solibieda, Managing Director of BASF Venture Capital GmbH. “The trailblazing technology from Prismlab allows large and stable components, such as medical braces and anatomical models, to be 3D printed for the first time. This investment supports BASF’s strategy of actively advancing our technologies and expanding our product offering in the 3D printing sector.”

“China is transforming from a manufacturing-driven to an innovation-driven economy. This investment in Prismlab reflects our commitment to further expanding our innovation capabilities in China, and BASF Venture Capital plays an important role in helping us identifying potential partners that lead us to success,” said Dr. Zheng Daqing, BASF’s Senior Vice President, Business and Market Development Greater China.

“The 3D printing technology must continue to evolve before it is set to change the world. At Prismlab, we aim to spearhead and accelerate that change by providing solutions through specialized customization. The investment allows us to stay laser-focused on our R&D capability, a key factor to achieve that goal,” said Mr. Hou Feng, Founder and Chairman of Prismlab.

Prismlab has developed a patented 3D printing process, “Pixel Resolution Enhanced Technology”, based on stereolithography (SLA). SLA allows comparatively large components to be produced using light-curing resins. Prismlab’s technology increases the printing resolution without compromising printing speed. In order to increase the amount of energy brought into a pixel, Prismlab’s technology divides each pixel in the resin into several small sections, which can be cured individually by exposure to LCD light. This makes the energy input into each pixel significantly higher than similar processes that expose each pixel to light once. This allows comparatively large and stable components or numerous parts to be printed in the same production step. With the use of LCD light, it also reduces process costs. This advantage opens opportunities in the footwear and furniture industry.

Along with this patented process, Prismlab also markets 3D printers and other related services. The Prismlab technology can be used in various key customer applications, including invisible braces, and anatomical models for medical, and education and training purposes.

SLA uses a laser for layer-by-layer curing of a photopolymer solution to shape the required workpiece. SLA and LCD based printing processes determinate the size, stability, and usability of the components to be produced as they are limited by the size of the light spot and the intensity of the light.

TRSA recently held its Annual Membership Meeting for the nomination, election and swearing-in of new Officers and Directors.
Jim Buik, president of the Roscoe Co. in Chicago is TRSA’s new chairman. Buik served as vice chairman of TRSA in 2017-2018. The Roscoe Company is Chicago’s leading independent uniform service company.

Jim has been active in linen, uniform and facility services associations. He’s a graduate of TRSA’s Executive Management Institute (EMI). He served on various committees, task forces and boards and was chairman of UTSA, which blended with TRSA, from 2003 to 2005. He has been a pioneer of industry technologies and best practices. Through association programs he has shared Roscoe’s experience in developing these innovations, including marketing automation, wastewater treatment and employee skill certification.

Additional officers and directors sworn in at the meeting:
•    Noel Richardson, Officer-Vice Chair, Shasta Linen Supply, Sacramento, CA
•    Jim Kearns, Officer-Treasurer, Alsco Inc., Salt Lake City
•    Bob Dudley, Director, APPEARA, Norfolk, NE
•    Scott Finkelstein, Director, Ace Uniform Services Inc., Baltimore
•    Dan Sanchez, Director, Medline Industries Inc., Mundelein, IL

In addition, Directors Randy Bartsch, Ecotex Healthcare Linen Service and P.J. Dempsey, Dempsey Uniform & Linen Supply were re-elected for second terms and will be officers serving on the TRSA Executive Committee.

TRSA said today that a study published in Infection Control and Hospital Epidemiology painted an unnecessarily alarming picture regarding the risk of C. difficile contamination from hospital linens and potential infectious outbreaks.
The study, titled From ward to washer: The survival of Clostridium difficile spores on hospital bed sheets through a commercial UK NHS healthcare laundry process concludes that “processing infected linen in commercial washer/extractor cycles could disseminate low levels of C. difficile spores and may be contributing to sporadic outbreaks of C. difficile infection (CDI).”

“Therefore, even in the study’s assessment, the findings are conditional,” said TRSA President and CEO Joseph Ricci. Ricci said that additional facts mitigate them even more:
•    The conclusion is based on one wash formula’s inability to meet the British National Health Service (NHS) standard. This standard indicates that water temperature and the amount of time that linen is washed are the true indicators of wash quality.
•    Best-management practices dictate that the quality of the wash process is maximized by using a complete wash formula that includes temperature, chemistry and mechanical action, which are customized to address various soil levels and generate hygienically clean textiles. In addition, heat from drying, ironing and finishing these linens also contributes to the linens’ cleanliness. Perhaps the only valid conclusion that can be reached from this research is that the one wash formula tested in the study is inadequate to remove C. difficile.
•    Most outsourced, professionally laundered healthcare linens and uniforms are processed using a tunnel washer, not washer/extractors used in the research.
•    Most healthcare-related wash formulas are designed to account for time, temperature, chemistry and mechanical action that appropriately eliminate C. diff. For example, the FDA recently approved the use of a disinfectant specifically formulated to kill off C. difficile spores.
•    TRSA has been collecting microbiological testing data since 2014 on linen and uniform service laundries that have achieved and maintained the Hygienically Clean certification by eliminating bacteria on soiled linens to negligible levels; there have been no positive identifications of C. difficile.
•    difficile contamination linked to linens is extremely rare. The best way to protect your facility and patients is to partner with a Hygienically Clean certified laundry.

• Huntsman Textile Effects and The Chemours Company FC, LLC (‘Chemours’) have agreed to expand their long-term alliance in the area of durable water repellence (DWR).

Singapore – By combining the strengths of both companies in innovation, technical support and marketing, the expanded co-operation unlocks the full potential of the alliance to develop and deliver new, sustainable DWR solutions and chemistry.  This historical alliance that was established in the early 1990s has been at the forefront of delivering state-of-the-art solutions to the textile industry for durable water repellent effects. In addition to
fluorinated solutions, the expanded alliance will now be able to offer non-fluorinated alternatives as well. The alliance will cover different aspects of the value chain including research, marketing, technical support and manufacturing.

“Strengthening the partnership between Huntsman Textile Effects and Chemours unlocks the full potential of both companies to shape technology and product offerings in sustainable durable water repellency. Our cooperation, which has stood the test of time, has clearly demonstrated that strong environmental credentials and performance can co-exist in equal measure. We are excited to move forward with a broader alliance as we strengthen our position as the industry leader in DWR textile solutions,” said Jay Naidu, Vice President, Strategic Marketing and Planning, Huntsman Textile Effects.

“Chemours is excited to expand our partnership with Huntsman Textile Effects. This partnership reinforces our commitment to take a leadership role in the innovation and development of more sustainable and high performing products that address the rapidly evolving needs of the textile industry and the consumers that use these products,” said Jesal Chopra, Vice President, Chemours Fluoropolymers.

Together, Huntsman Textile Effects and Chemours have worked to lead the textile industry’s transition  from long-chain water repellent products to more environmentally friendly short-chain chemistry and, more recently, non-fluorinated chemistry. The collaboration has resulted in new, market-leading DWR solutions that deliver on performance and sustainability. Chemours introduced Teflon EcoElite™ with Zelan™ R3 technology in 2015, a renewably sourced, non-fluorinated water repellent finish. Containing 60% plant-based materials* and complying with all key industry standards, Zelan™ R3 repellent offers excellent water repellency and durability while preserving fabric breathability. It meets or exceeds performance levels possible with fluorinated technologies. Teflon™ Eco Dry with Zelan™ R2 PLUS technology, which compliments Teflon EcoElite™, was recently introduced. Zelan™ R2 PLUS contains 30% renewably sourced plant-based raw materials* and is focused on delivering a high level of durable water repellency for all substrates.

In 2017, Huntsman Textile Effects introduced PHOBOTEX® RSY non-fluorinated durable water repellent, which was developed to specifically meet extreme protection, comfort and durability requirements for both synthetic and cellulosic fibers, delivering an enhanced environmental profile for brands. PHOBOTEX® RSY durable water repellent raises the bar in performance on synthetics, allowing brands to offer high-performance weather protection with an assurance of eco-friendly sustainability. Providing effective protection in extreme environments together with breathable comfort, PHOBOTEX® RSY durable water repellent repulses rain, sleet, and snow, ideal for highperformance outerwear fabrics.

Both companies bring a rich and established heritage firmly centered on research and innovation. Through their expanded alliance, joint research and development efforts in DWR enable Huntsman and Chemours to stay at the forefront of industry trends and regulatory changes for a more sustainable textile industry.

Virginia-based Launderer Recognized for Commitment to Sustainability and Conservation Practices
Handcraft Linen Services, the Richmond, VA-based independent medical launderer, has been certified Clean Green, reflecting the company’s dedication to operational efficiency and sustainability. Linen, uniform and facility services companies receive this distinction by adhering to TRSA-designated water and energy use thresholds and deploying best management practices (BMPs) consistent with the ASTM International environmental laundering standard.
 
Handcraft Linen Services’ customers can be assured their reusable healthcare textiles are washed, dried and finished with processes that maximize sustainability and reduce greenhouse emissions. Clean Green certified operations demonstrate significant commitment to conservation and green operations through these BMPs:
•             Recovering heat from drained hot water and heat dispersed from the process of warming water
•             Recapturing drained water from rinses for reuse
•             Using environmentally friendly detergents
•             Removing solids and liquids from wastewater
•             Solar energy and energy-efficient lighting
•             Recycling programs
•             Re-routing trucks to save vehicle fuel
•             Spill prevention plans
 
The Clean Green certification is valid for three years at a time. TRSA inspects laundry facilities seeking certification and approves documentation of their water and energy use and BMP deployment through production reports they submit to auditors during the inspections. TRSA’s certification management protocol includes auditor training by the association’s inspection program administrator.
Clean Green aligns with the ASTM International standard, Guide for Sustainable Laundry Practices, which recognizes key criteria for the certification as universal indicators of maximum sustainability in commercial laundry work. ASTM’s review of TRSA BMPs verified these as the most effective and practical techniques for a laundry to achieve green objectives.
TRSA members prompted development of the standard, which was vetted in the sustainability subcommittee of the ASTM Committee on Textiles. Top technical experts, scientists and environmental professionals from outside the linen, uniform and facility services industry reviewed the BMPs. ASTM is the global leader in developing and delivering voluntary consensus standards unparalleled in building consumer confidence in product and service quality.
 
“I applaud Handcraft Linen Services for their sustainability efforts and maintaining the highest standards in their production and delivery operations,” said Joseph Ricci, TRSA president and CEO. “Meeting all the criteria for certification is not easy, but the company is committed to industry-leading processes and technologies.”

• Italian expertise, research and green innovation.
• METALBOTTONI ups the stakes with one-of-a-kind interpretations, to enhance its market presence.

At Première Vision Accessories (Paris, 19-21 September) the company presents the new collection VÀNITA, a mix of leatherwear and sportswear, based on Made in Italy craft, with an increasingly wide and coordinated range.

Based on product experience, combining new trends in accessories. The METALBOTTONI strategy is enriched with product novelties which aim at exploring new existing market segments. A strategy which increasingly leads great artisan production skills to meet constant research and expansion of the range, with the world of sportswear becoming more and more pivotal; without forgetting the important sustainable innovations of the NO IMPACT protocol.

No Impact becomes “Committed Accessories”

The guideline for restyling the METALBOTTONI range over the past two years has been the recent implementation of the NO IMPACT corporate sustainability protocol, which has just acquired a new “dress”, associated with the following pay-off: “Committed Accessories”. It is a way of underscoring the constant green development of the company over the past few years, in terms of process and product: use of recycled raw materials, development of finishing without chemicals, implementation of processes which today have allowed to reduce electricity and water consumption to almost zero.

Moreover the range of NO IMPACT proposals for this season has expanded to include not only new metal finishing but also leather label completely made from processing scrap, thus establishing Metalbottoni as “partner for branding elements” also in terms of sustainability. Pure Made in Italy and constant expansion of collections towards sportswear The great skill in metal processing, which for sixty years now has characterised the top-of-the-range quality of METALBOTTONI products, is now combined with constant research work conducted by our in-house Style Office, resulting in new collections which are more and more in line with the trends emerging from major trade fairs. Maintaining a presence on strong markets (central Europe, Northern Europe and United States), increasing the depth of segments and intercepting new ones. This is the main goal also chosen for the Première Vision Accessories Exhibition where, alongside the autumn-winter 2019/2020 collections, there will be a preview of VÀNITA, the new collection dedicated to leatherwear and more.

METALBOTTONI is proving to be one of the most dynamic companies in the accessory industry.

Over the past two years, in fact, it has introduced numerous product and process innovations, aiming at increasing its range especially as regards sportswear accessories. This trend was driven by a substantial increase in demand by read-to-wear and luxury brands in the past two seasons, and today it means new proposals which account for 35% of the range for METALBOTTONI. New collections have been presented in the past two seasons expressly dedicated to the sportswear world, namely GRAVITA, the first line designed by the company for pressure buttons, and MÀRYA, the new beachwear collection. Also the line called LABORA, the classic collection of accessories for fashion and ready-to-wear has been constantly enhanced with proposals combining style and technical performance. This mix of fashion and sport elements is increasingly evident in the company’s product range, for example in the combination of different materials, using metal with nylon or other resins to create new and unique accessories.

Vànita: beyond leatherwear, a world of accessories

The meeting between fashion, luxury and sportswear has produced VÀNITA, the brand new collection which presents a new approach to accessories dedicated to leatherwear, from an allround perspective from luxury to sportswear. Developed starting from solid product research by the company’s in-house Style Office, VÀNITA is a true meeting of styles and elements, a combination of high product standards with unique elegance. This line introduces one-of-a-kind visions for accessories, exploring highly original pathways dedicated to the world of leather. The VÀNITA proposal ranges from accessories for leatherwear and small leatherwear, to those for shoes, bags and the sportswear worlds. There are two main lines within this collection: one is expressly designed for the world of luxury, the other has a more technical and sporty approach. A true mix between artisan metal processing, based on the great METALBOTTONI expertise in this sector, and “ingredients” such as nylon, rubber finishes or innovative 3D processing, which are often combined together.

“Our goal is to offer an increasingly comprehensive range which allows us to explore new segments on the markets where we are present” - says Gregorio Valli, CEO and President of METALBOTTONI S.P.A – “a ‘recipe’ which should be able to integrate our unmatched product expertise with a constant expansion of our range and continuous implementation of our pathway towards corporate responsibility and sustainability”.

Huntsman Textile Effects is pleased to announce the appointment of  Rajiv Banavali as its new Global Vice President of Research and Technology, effective August 10. Rajiv will join the Textile Effects senior management as part of its global leadership team and will report directly to Rohit Aggarwal, President Textile Effects.

Rajiv joins from Honeywell International where he held several research and development leadership roles including his most recent, as Vice President, Chief Technology Officer, with its Advanced Materials division. He has more than 20 years’ experience in the development and execution of R&D strategies and the advancement of innovation platforms for both product and process technology roadmaps. Rajiv has proven success in leading large, global research organizations in the development and commercialization of technologies in the area of specialty chemicals, both at Honeywell and at his previous employer, Rohm & Haas.   

“As the global textiles industry transitions to new business models in an increasingly competitive and tightly regulated environment, it is now more important than ever that Huntsman Textile Effects remains innovative, flexible and close to our customers. We are extremely pleased to have in Rajiv, a highly experienced candidate with a global outlook and an acute commercial acumen, to lead a critical area of our business, focusing on advancing our sustainability agenda while progressing the research and innovation of our product portfolio,” said Rohit Aggarwal.

Rajiv holds a Ph.D. in Organic Chemistry from the University of Missouri, USA. Rajiv will be based in Singapore and will relocate from New Jersey, USA.
Rajiv succeeds Sarada Namhata who is retiring after five years in the role.

Tenowo, Inc. and Tenowo GmbH, Hoftex Group AG businesses and manufacturers of engineered nonwovens, announce a new addition to the company, Tenowo de Mexico, S. de R.L. de C.V. As a first step it involves the establishment of a sales office and warehouse in the city of San Luis Potosí, Mexico.

San Luis Potosí, Mexico – The new entity is jointly owned by Tenowo Inc. in the USA and Tenowo GmbH in Germany. It was established in response to increased demand for Tenowo’s automotive products in the Mexican market and will house materials manufactured both in the United States and Germany.

“This location provides Tenowo, Inc. with a footprint in a fast-growing geographic part of our market and is hopefully the first step towards further expansion. San Luis Potosí is a thriving city in the heart of the Bajio region of Mexico and has access to four major ports. In addition, it is within a few hours of the major automotive manufacturing hubs in Mexico.” stated Chris Peart, President and CEO of Tenowo, Inc. “It is the ideal location for our needs,” he added.

Dr. Harald Stini, Global Managing Director for Tenowo commented, “Tenowo continues to have strong growth prospects worldwide and this is part of our efforts to capitalize on new opportunities. We hope that this venture will enable us to support our global customers with locations in Mexico and gain new regional customers.”

Hexcel Corporation (NYSE: HXL) and Groupe Gazechim Composites, an official Hexcel distributor for more than 20 years, have reached agreement to provide customized kitting services for advanced composite materials sold to aerospace and defense customers and for high-performance industrial applications.

The joint venture, named HexCut Services, brings together Hexcel – a leader in advanced composites – and Gazechim – a leader in distribution and logistics – to provide pan-European kitting services that will include Hexcel’s innovative carbon fiber prepreg and other composite materials such as adhesives and fabrics for aerospace, defense and industrial applications. Pre-cut kits save customers time and investment, reduce inventory and minimize material losses through scrap reduction.

Gazechim’s existing kitting plant in Maulévrier, 75km east of Nantes (France), acquired in 2016, will be the initial hub for providing pre-cut kits to customers as well as central services in the future to a network of local kitting facilities in Europe.

Thierry Merlot, Hexcel President – Aerospace, Europe, MEA and Asia/Pacific, said, “This is a great opportunity for us to join together with Gazechim, a trusted and well-established partner, to offer our leading advanced composite products to customers in a way that helps them become more productive and profitable.”

Gazechim will own a majority share of the joint venture. Jean Guittard, Chairman Gazechim, said, “This project marks a new era between Hexcel and Gazechim and consolidates our long-term partnership of almost 20 years.”