From the Sector

This September’s Cinte Techtextil China will once again provide a strong barometer of the state of the global technical textiles industry, and in particular which sectors in Asia as a whole, and China specifically, are performing well. Two of these for certain are Buildtech and Mobiltech, with a number of leading global and Chinese brands exhibiting to eager buyers from these sectors.

Cinte Techtextil China is Asia’s leading biennial fair for the technical textiles and nonwovens sector, and will feature an expected 500-plus total exhibitors from around 20 countries & regions from 4 – 6 September. The fair offers products and technologies for 12 application areas* which cover the entire industry.

Buildtech benefits from Belt & Road and other infrastructure investment

With a huge boom in national and regional infrastructure projects, the market for Buildtech products, especially geotextiles and construction textiles, is rapidly expanding. In particular, the government’s global Belt & Road project, as well as continued investment at home in highways, high-speed rail and more, is fuelling this expansion. According to CNITA, in 2017 China started 35 new railway projects, with additional private capital investment in this sector totalling some USD 53 billion that year. The same investment in highway construction increased 17.7%, while water conservation project investment by private firms reached a new record of USD 105 billion.

With this potential in the Asian market, it’s no surprise a number of new exhibitors will feature in the Buildtech sector at the fair, including FPC Technical Textile from Saudi Arabia, Kobe-cz from the Czech Republic, as well as Lenzing Plastics, while Johns Manville are one of the returning exhibitors this year.

• FPC Technical Textile (Saudi Arabia) produce high-end specialty fabrics including PVC coated fabrics and fibre glass PTFE fabrics, and will focus on the latter at the fair.
• Kobe-cz (Czech Republic) will showcase their nonwoven fabrics, mainly from glass fibre with temperature resistance up to 800°C.
• Exhibiting for the first time at the fair with their Plastics division, Lenzing (Austria) will feature their technical laminates for building industries, roofing membranes, vapour barriers, isolation facings and barrier packaging, as well as PROFILEN® PTFE yarns, films and fibres at Cinte Techtextil.
• Johns Manville’s (US) products on offer include polyester spunbond, PP & PBT meltblown, glass fibre nonwovens, micro glass fibre nonwovens, hybrid nonwovens, glass fibre needle mat and glass microfibers.

Mobiltech benefits from huge increases in automobile production in China

With new textile innovations and application possibilities spreading throughout the automobile industry, coupled with the fact China is the world’s largest auto producer, Cinte Techtextil is the place to see the latest products and technologies for this sector this September. Automobile production in China reached 29 million units in 2017, an increase of 3% year-on-year. Staggeringly, new-energy vehicle production grew by 53% last year, while SUVs and commercial vehicles increased 13.81% and 13.95% respectively.

With such strong growth in China, a number of leading international Mobiltech producers, as well as top domestic suppliers, will be at Cinte Techtextil this year, including:

• Abifor (Switzerland): their focus at the fair is on products designed for automotive, construction and other technical applications, in particular their specialty hot-melt powders. The company has its own production unit in Shanghai, and reports that an increasing number of domestic customers are starting to focus on more sophisticated products.
• SKS Group (Sweden): will showcase high performance single end yarn for automotive and industrial hoses, and single end cord for automotive and industrial belts.
• Swisstulle (Switzerland): will have a range of products on offer for automotive, rail and aviation uses, including sunshade materials, nets, tube reinforcements and new possibilities for luggage compartment covers.
• Windel Textile Far East (Germany): with production undertaken in China, this German firm offers textile greige, half-done and finished materials. They offer nonwoven, knitted and woven fabrics (substrates), and glass fibre solutions. At the fair, they will showcase substrates for adhesive tapes / wire harnessing tapes, and Maliwatt- and coagulated microfibre fleece for covering vehicle interiors.
• Protechnic (France): they will feature hot melt thermoadhesive nets, webs and films, as well as laminating process in automotive and other industrial applications at Cinte 2018.
• Kuangda Technology Group (China): having supplied products for global brands such as Volkswagen and Audi, this Chinese supplier will offer automotive interiors, including interior fabrics, seat covers and cushions at the fair.
• Shanghai Shenda (ShanghaiTex Group) (China): specialising in automotive interior textiles, they manufacture a full range of products including grey car carpet, moulding car carpet, head liners (warp-knitting and nonwoven), seat belt, seat fabrics and more, and have supplied the likes of Mercedes-Benz, BMW, Volkswagen and GM.

Cinte Techtextil China is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA). To find out more about the fair, please visit: www.techtextilchina.com.

As the countdown to the 2018 edition of Cinte Techtextil China enters its last two months, the final exhibitor line-up is starting to take shape. A number of leading international and Chinese brands across the fair’s 12 product application areas will feature at the Shanghai New International Expo Centre from 4 – 6 September, with an expected 500-plus total exhibitors from around 20 countries & regions set to feature.

Nonwovens exhibitor highlights

As the fair’s largest product category, buyers have a wide range of domestic and overseas brands to source from, including:

• Johns Manville (US): who will showcase their polyester spunbond, PP & PBT meltblown, glass fibre nonwoven, micro glass fibre nonwoven, hybrid nonwoven, glass fibre needle mat and glass microfibre product lines among others at the fair.
•  J.H. Ziegler (Germany): with over 150 years’ expertise and their own production plant in China, they offer products for acoustic absorption in automotive interiors and exteriors, nonwoven foam composites for leather lamination, needle-punched nonwovens, foam nonwoven composites, laminated nonwovens and natural-fibre nonwovens.
• KOBE-cz (Czech Republic): a new exhibitor to the fair, their nonwoven fabrics, mainly made from glass fibre with temperature resistance up to 800°C, are used for high-temperature isolation in the automotive, marine, energy and building industries. They also have isolation materials made from natural fibres including hemp, wool, cotton and flax.
• TDF Nonwovens (China): one of the leading domestic brands, their specialties are polyester spunbond geotextiles, polyester filament roofing carriers, filter nonwovens, high-strength coarse denier polypropylene spunbond geotextiles and medical & health nonwovens.
• Kingsafe (China): they specialise in the production of fusible interlining and nonwoven fabrics for high-end garments.

Yarn & fibre exhibitor highlights

• Perlon (Germany): has developed a PET based monofilament, HighGrip, which guarantees long-lasting efficiency of conveyor belts, and is available in various types with different tribological characteristics, which they will feature at the fair.
• Sateri (China): is a global leader in viscose rayon made from 100% dissolving wood pulp, and the largest maker of viscose fibre in China. Their natural and high-quality fibre, made from trees grown on renewable plantations, can be found in textiles and skin-friendly hygiene products.
• Cordenka (Germany): producers of industrial rayon, their product range covers rayon tire cord, yarn, single-end dipped cord, short-cut fibre and more.
• EMS-Griltech (Switzerland): will showcase a range of technical fibres & yarns and thermoplastic adhesives at the fair.
• Barnet (Germany): several finished products (nonwovens, spun yarns and fabrics) made with their specialty fibre will be on display at the fair, including OPAN, para-aramid and carbon filament fibres. The application of their specialty fibre in flame retardant and anti-cut gloves and felts will be shown at their booth for the first time.

Coated textiles & solutions exhibitor highlights

• Stahl (the Netherlands): the Dutch company will present new products from their water repellent and flame retardant ranges at this year’s fair. According to the company, as the Chinese government continues its efforts to clean up the environment, eco-friendly chemicals remain in strong demand in the country.
• Sioen (Belgium): will showcase sign materials, truck tarpaulins, tents, membrane fabrics, apparel products, chemicals and specialty products such as inflatable boat fabrics, pool liners and more at Cinte 2018.
• ROWA Lack (Germany): a new exhibitor at this year’s fair, they will present their special lacquer systems and top coatings.
• Trelleborg (Sweden): also a new exhibitor, they will display engineered textiles, especially in the fields of outdoor, medical, protective and automotive.
• FPC Technical Textile (Saudi Arabia): another first-time participant at the fair, they will showcase a range of high-end specialty fabrics including PVC coated fabrics and fibre glass PTFE fabrics.
• Zhejiang Jinda New Materials (China): this supplier is known for its coated textiles for industrial, transportation and building uses, as well as warp knitted geo-synthetic materials and printable coated materials for advertisements.

Lenzing to showcase its new VEOCEL nonwovens specialty brand at the fair

First announced in June this year, and featuring at Cinte Techtextil, Lenzing’s new VEOCEL brand is billed as a premium range of nonwovens fibres for daily care, which “provides the nonwovens industry with fibres that are certified clean and safe, biodegradable, from botanic origin and produced in an environmentally responsible production process.” Products in this range can be applied to a multitude of uses including baby care, beauty and body care, intimate care and surface cleaning, under the VEOCEL Beauty, VEOCEL Body, VEOCEL Intimate and VEOCEL Surface brands.

Asia’s largest biennial event for the entire technical textiles and nonwovens sector will feature some of the industry’s biggest overseas machinery brands. Held on the earlier date of 4 – 6 September this year, the fair will feature an expected 500-plus total exhibitors from around 20 countries & regions.

As the world’s largest producer of technical textiles and nonwovens, China’s demand for production machinery is insatiable. As such, this September’s Cinte Techtextil China has attracted some of the world’s leading machinery brands, particularly in the nonwovens and sewing machinery sectors, ensuring a wide range of sourcing options for both domestic and international buyers.

Overseas producers respond to strong Chinese demand
As the Chinese domestic and export markets’ demand for quality technical textiles and nonwovens products continues to increase, overseas machinery brands continue to enter the country, using Cinte Techtextil China as their starting-out platform. ANDRITZ Nonwoven is just one of those who see the growing potential. “Chinese nonwovens manufacturers are increasingly requiring higher capacities and top-class quality for their nonwovens products for local and export markets,” Mr Laurent Jallat explained. “China is the biggest market in terms of installed capacity, and shows quite promising potential for the future. In the past years, we’ve seen rapid growth in products such as disposable face masks.” ANDRITZ responds to this demand with their neXline spunlace eXcelle line which features state-of-the-art TT card web forming and JetlaceEssentiel hydro entanglement units for high capacity and speed.

The DiloGroup also report an increase in demand for their products in China. “China is one of our biggest markets,” explains Mr Dominik Foshag. “We have procured huge orders from China, as Chinese customers are considering German technology more frequently nowadays. The visitor quality of Cinte Techtextil has been very good in this past, and we think this year’s fair will be also successful as we know many of our customers are going to visit.”

Oerlikon will introduce its spunbond technology to the Chinese market this year, and is expecting to conclude initial contracts at the fair due to increased demand for overseas products. “The Chinese market for nonwovens products is by far the largest and fastest growing national market. Chinese manufacturers are no longer satisfied with lower product quality, but want to exceed Western quality levels, for example. The products must now meet stricter customer requirements and legal standards, some of which are significantly higher than other international standards,” Ms Lena Kachelmaier said.

Truetzschler Nonwovens has also noticed this trend. Ms Jutta Stehr commented: “In the last two or three years, China became one of the pacemakers in the field of nonwovens used in beauty, skin care and hygiene applications. Asian markets have set new standards concerning quality in nonwovens. For instance, making disposable wipes from cotton fibres is a trend originating in Asia. The luxurious feeling of cotton combined with the requirement for eco-friendly products will further drive demand in China and elsewhere. Accordingly, Truetzschler Nonwovens anticipates more inquiries at Cinte Techtextil for its proven carding and spunlacing solutions for cotton nonwovens.”

Weaving machine supplier Itema has also noticed strong demand in China for products made in Italy. “Generally speaking, and especially for technical fabrics, imported machinery is highly evaluated and appreciated by Chinese customers. In recent years, Itema experienced significant growth in the sale of its Made-in-Italy weaving machines in China, and in other APAC countries. Imported machines are synonymous with quality and reliability, and we believe this positive trend will be constant in the future,” Mr Matteo De Micheli outlined.

Weaving machinery exhibitor highlights

• ANDRITZ Nonwoven: their specialty is technologies for drylaid, wetlaid, spunbond, spunlace, needlepunch and textile calendering. At Cinte Techtextil, they will highlight their aXcess product portfolio, which has been especially designed for medium-capacity production. ANDRITZ has developed this range to fit the demands of producers with medium-capacity requirements, particularly in emerging markets. It includes lines and individual machines for needlepunch, spunlace, wetlaid and calendering processes.
• Autefa Solutions: visitors to their booth will experience the company’s expertise as a full line supplier for carded- crosslapped needlepunch lines, aerodynamic web forming technology, spunlace and thermobonding lines. Their nonwovens lines meet customers’ requirements for quality web formation, bonding, active weight regulation and minimal maintenance.
• DILO Systems: a leader in the field of staple fibre nonwoven production lines, DiloGroup will present their latest developments at the fair, including staple fibre production lines, card feeding and cards and crosslappers & needlelooms.
• Oerlikon: they will showcase spunbond solution lines for the production of polypropylene geotextiles. According to the company, spunbond geotextile applications are on the rise as the market is increasingly demanding more efficient processes and products, which means the product requirements are often the same or greater, but with a lower raw material input. Spunbonds are progressively replacing classical carded nonwovens due to their technical and commercial benefits.
• Truetzschler Nonwovens: concentrating on solutions for producing a broad range of hygiene nonwovens including wipes at the fair, they will focus on thermobonding & spunlacing processes and the respective machinery, from fibre preparation down to winding.

Sewing machinery exhibitor highlights

• Itema: making their debut at Cinte Techtextil, they are a leading supplier of weaving machines for technical fabrics production. According to the company, they are the only weaving machine producer to offer technical textile manufacturers the top three technologies for weft insertion: Rapier, Projectile and Airjet.
• Picanol: they use their leading position as producers of weaving machines for other textile products to expand into machines for woven technical textiles by investing heavily in state-of-the-art technology, as well through the modular design of their machine platforms which allow them to serve different industry sectors effectively.
• Lindauer Dornier: featuring in the German Pavilion this edition, they offer a number of weaving machine varieties including rapier, air-jet, open reed weave (ORW) and more. Their rapier weaving machines have set the technological standard in the high quality wool textiles market for decades, and this quality will be on display at their booth with the DORNIER P1 rapier weaving machine.

Domestic brands to watch out for

In addition to these leading overseas brands, a strong line-up of Chinese machinery producers will also feature at the fair, including Changshu Weicheng Non-Woven Equipment and Shijiazhuang Textile Machinery.

Nach dem German Innovation Award und dem German Design Award hat drapilux den German Brand Award in der Kategorie „Interior und Living“ für seine exzellente Markenstrategie erhalten.

Auf dem Markt ist drapilux nicht nur der Hersteller von Bezugs- und Dekorationsstoffen mit der größten Auswahl an intelligenten Funktionen, sondern hat diese überhaupt erst eingeführt. Sicherheit, Hygiene, Raumqualität und Akustik werden durch die Funktionen „flammstop“, „akustik“, „air“ und „bioaktiv“ der drapilux-Textilien erheblich verbessert.

Das spiegelt sich deutlich in der Corporate Identity wider: „drapilux hat mit seiner ‚Mehr als nur Stoff‘-Imagekampagne den Markenkern besser denn je auf den Punkt gebracht“, sagt Marketingleiter Markus Overbeck, der den German Brand Award in Berlin entgegennahm. So bezeichnet der Claim „Intelligence woven in“, zu Deutsch „gewebte Intelligenz“, die hohe Qualität der Textilien mit eingebauter Sicherheit, für die die Marke international bekannt ist.
       
Dass die Textilien „innere Werte“ besitzen und damit Kunden im Alltag einen echten Mehrwert bieten, wird anhand symbolhaft dargestellten Stoffnachbildungen sichtbar: Ein roter Stoff-Feuerlöscher, grüne Ohrenschützer aus Textil, ein blauer, gewebter Ventilator und eine rosafarbene Textil-Desinfektionsmittelflasche zeigen auf der Webseite, auf Messen, auf allen Kommunikationskanälen, wofür drapilux steht. Die vier Imagemotive sind zu den Sinnbildern für die Alleinstellungsmerkmale von drapilux geworden. „Die Strategie, für die die Marke ausgezeichnet wurde, bauen wir auch weiter aus. Dazu wird es eine weiterführende Kampagne geben, die noch im Laufe des Jahres starten wird“, so Overbeck.

Liberty Hotel in Offenburg

Wo früher Häftlinge hinter schweren Türen und Eisengittern ihre Strafe absaßen, herrscht heute Wohlfühlatmosphäre: Aus dem einstigen Offenburger Gefängnis wurde das Designhotel Liberty. Der Mix aus Original-Details, einem cleveren Lichtkonzept und hochwertigen Materialien verwandelte die ehemalige Strafanstalt in ein einzigartiges Objekt. Maßgefertigte Rollos und Dim Outs von drapilux erzeugen eine gemütliche Stimmung in verschiedenen Bereichen des Hotels.

Mehrere Jahre Planungs- und Bauphase waren erforderlich, den ehemals tristen Ort in ein Luxushotel mit 38 Zimmern und Suiten sowie großzügigen Aufenthaltsbereichen umzubauen. Verantwortlich für Konzept und Planung, die Gesamtgestaltung, Bauleitung und Generalunternehmung des kompletten Vorhabens zeichnet die Konrad Knoblauch GmbH aus Markdorf am Bodensee. „Bei der Umplanung galt es vor allem, das historische und bedrückende Erbe des Knastgebäudes mit der richtigen Portion an Unbeschwertheit zu versehen“, erläutert Katja Scharnagel, Projektverantwortliche bei Konrad Knoblauch. Für die Zimmer wurden hierzu beispielsweise zwei bis drei der beengten Zellen zusammengelegt und mit wohnlichen Elementen versehen. Die knapp 50 Dachfenster wurden mit passgenauen Faltrollos des drapilux-Artikels 795 bestückt und so zu angenehmen Lichtquellen.

Die alte Haftanstalt besteht aus zwei Backsteingebäuden, die heute die Hotelzimmer beherbergen. Verbunden werden die beiden Bauten nun durch einen transparenten Glaskubus. Darin befinden sich die Gemeinschaftsbereiche u. a. mit dem Spitzenrestaurant „Wasser & Brot“, einer Bar sowie der Lobby. „Eine Besonderheit in der Empfangshalle ist der „Teppich“. Er wurde nicht verlegt, sondern als Muster in den Betonboden eingefräst. An Gemütlichkeit fehlt es dennoch nicht“, erklärt Scharnagel das Konzept. Dazu erfolgte die Ausstattung äußerst sorgfältig – von Designerstücken bei der Möblierung bis zu bodentiefen Dim Outs (Artikel 243) aus dem Hause drapilux.

• Strenge Qualitätsnachweise für Objekttextilien

Deko-, Möbelstoffe und Gardinen haben eine ganze Reihe von Prüfungen zu bestehen, bevor sie in Krankenhäusern, Seniorenheimen, Hotels, Kreuzfahrtschiffen, Theatern, Kitas oder Schulen eingesetzt werden dürfen. Je nach Verwendungsbereich in öffentlichen Gebäuden muss beispielsweise der Nachweis der Schwerentflammbarkeit erfüllt sein.

„Es gibt eine Vielzahl an Anforderungen für nahezu jeden Bereich, die wir als deutscher Textilhersteller in Form von Zertifizierungen und Zulassungen zu Sicherheit, Langlebigkeit und Umweltverträglichkeit zu erfüllen haben“, erklärt Frank Wiedemann. Er ist Leiter der Qualitätssicherung bei Schmitz Textiles mit Produktionsstätte im nordrhein-westfälischen Emsdetten. Nur, wer wie Schmitz Textiles zertifiziert ist, darf Stoffe in bestimmten Märkten oder Anwendungsfeldern anbieten. drapilux, eine Marke von Schmitz Textiles, gehört zu den europaweit führenden Herstellern von flammhemmenden Stoffen für den Objektbereich.

Durchgeführt werden die Prüfungen von unabhängigen, akkreditierten Prüfinstituten und/oder staatlichen Behörden nach nationalen und internationalen Normen oder EU-Richtlinien. Auf der einen Seite sind das Management-Zertifizierungen für Qualität, Umwelt und Energie. Schmitz Textiles ist nach ISO 9001/ ISO 14001 und ISO 50001 durch die Deutsche Gesellschaft zur Zertifizierung von Managementsystemen (DQS) bewertet, auditiert und zertifiziert worden.

Auf der anderen Seite stehen die Produktzertifizierungen. „Vor allem zu erwähnen, ist die jährliche Fremdüberwachung unserer schwerentflammbaren Möbel-, Dekorationsstoffe und Stores von drapilux“, so Wiedemann. Einmal jährlich kontrolliert das staatliche Materialprüfungsamt Nordrhein-Westfalen (MPA NRW-Brandprüfzentrum Erwitte) die drapilux-Produkte auf Einhaltung der Schwerentflammbarkeit nach der DIN 4102 (Baustoffklasse B1). drapilux flammstop-Qualitäten sind somit nachweislich als schwerentflammbar eingestuft und weisen – im Gegensatz zu PVC-haltigen Stoffen – auch eine sehr geringe Rauchgasentwicklung im Brandfall auf.

Freiwillige Zertifizierung für noch mehr Sicherheit

Mit dieser jährlichen Fremdüberwachung geht Schmitz Textiles sogar über die gesetzlichen Vorschriften hinaus. „Die Zertifizierung zeigt an, dass unsere Produkte jederzeit die hohen Anforderungen des Brandschutzes für Baustoffe erfüllen. Damit können unsere Kunden sich der Qualität stets hundertprozentig sicher sein“, sagt Wiedemann.

drapilux-Textilien werden nicht nur nach deutschem Recht, sondern auch nach europäischen und internationalen Brandschutznormen geprüft. In Frankreich beispielsweise muss das Prüfergebnis M1 erzielt werden, das einen noch höheren Stellenwert als die deutsche B1-Zertifizierung hat. Der drapilux-Stoff wird hierzu nicht an den Kanten, sondern an der Oberfläche mittels Gasflamme entzündet. Das Textil darf höchstens fünf Sekunden brennen und darf nicht brennend abfallend sein.

Um die B1-Kriterien zu erfüllen und damit als schwer entflammbar eingestuft zu werden, müssen die von akkreditierten Prüfinstituten getesteten drapilux-Textilien nach einem Brandschachttest noch eine mittlere Restlänge von mehr als 15 cm aufweisen und die mittlere Rauchgastemperatur von 200 Grad Celsius unterschreiten.

Doppelt hält besser: Tests im eigenen Labor

„Vor der externen Prüfung wird jeder Stoff bei drapilux aber auch schon inhouse genauestens untersucht“, erklärt Wiedemann. Schmitz Textiles hat ein vollständig eingerichtetes Prüflabor, um Eigenprüfungen nach vorgegebenen Standards selbst durchführen zu können. „So bekommen wir bereits in der Entwicklung von neuen Textilien Sicherheit, da Brandschutzprüfungen zwischen den einzelnen Entwicklungs- und Produktionsschritten erfolgen können“, sagt der Leiter der Qualitätssicherung. Schmitz Textiles investiere viel in die Sicherheit der Produkte, indem verordnungs- und gesetzeskonforme Produktions- und Qualitätssicherungsprozesse etabliert wurden. „Das kostet Geld“, so Wiedemann, „stellt aber einen klaren Vorteil für die Verwender von drapilux-Produkten dar.“

Besonderheit Maritim-Sektor

Auf Schiffen ist es besonders wichtig, den Brandschutz genauestens zu beachten und einzuhalten. Keine Fluchtmöglichkeiten und nur eingeschränkte Optionen der Brandbekämpfung machen präventive Maßnahmen unabdingbar.

Für Schiffsausrüstungsmaterialien gilt die Einhaltung des Internationalen Übereinkommens zum Schutze des menschlichen Lebens auf See (SOLAS). Um dies zu erfüllen, müssen Möbel-, Dekorationsstoffe und Stores nach fest definierten Prüfmethoden (FTP-Code 2010) geprüft und zugelassen werden. In Europa wird dieses durch die Richtlinie 2014/90/EU geregelt.

Nach der aktuellen Richtlinie 2014/90/EU haben alle Händler oder Einführer von Schiffsausstattungsmaterialien den Artikel 14, Absatz 3 zu beachten. Dieser Artikel besagt, dass jeder Einführer oder Händler als Hersteller gilt und entsprechend der Richtlinie die Pflichten des Herstellers nach Artikel 12 erfüllen muss, wenn er Schiffsausrüstung unter seinem eigenen Namen oder seiner eigenen Handelsmarke in Verkehr bringt oder ein EU-Schiff damit ausstatten möchte.

„Diese Besonderheit bei Schiffsausrüstungsmaterialien muss in Europa zwingend beachtet werden“, sagt der Experte. „drapilux-Maritimstoffe weisen die Zulassungen – also Modul B + D – einer europäisch notifizierten Stelle auf und können somit bedenkenlos auf allen Schiffen weltweit eingesetzt werden“, so Frank Wiedemann.

Frank Wiedemann ist bei Schmitz Textiles u. a. dafür verantwortlich, dass die internationalen Brandschutznormen eingehalten werden und beantwortet Anfragen zur REACh – der Europäischen Chemikalienverordnung zur Registrierung, Bewertung, Zulassung und Beschränkung chemischer Stoffe. Die REACh gilt als eine der strengsten Chemikaliengesetze der Welt.

Exhibitor registration is open for Cinte Techtextil China, which will take place with an earlier date of 4 – 6 September this year. Asia’s largest biennial event for the entire technical textiles and nonwovens sector, the fair is held in a region that not only continues to grow strongly but is expected to do so for the foreseeable future, not least due to major government initiatives in China that are injecting billions of dollars of investment into the industry.

“It is due to the increasing opportunities in the Asian market that we are expecting more European exhibitors to feature at Cinte Techtextil China this year,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd outlined. “As the fair attracts a diverse range of trade buyers, including from 12 different application areas such as Buildtech, Clothtech, Geotech, Medtech, Mobiltech and Protech, it is a unique opportunity within Asia for suppliers to meet with the entire industry and maximise the potential of their products across various end-uses and sectors.” While many new European companies are expected this year, some of the returning big brands already confirmed include Trützschler, Dilo and Barnet from Germany, Andritz from France, Stahl from the Netherlands, Itema from Italy and Picanol from Belgium.

Chinese and Asian technical textiles and nonwovens markets continue their upward trajectory
When it comes to technical textiles and nonwovens, the Asian region, and China in particular, is displaying impressive growth, which will remain the case in the coming years.

China overall

•  The total output of technical textiles and nonwoven products is estimated to reach over 22 million tons in 2020, accounting for 30% of global production, and double that of 2013.
•  In 2016, China’s technical textile exports were worth USD 23.61 billion. Nine major products surpassed USD 1.5 billion worth of exports each: medical & hygiene textiles, coated textiles, nonwovens, canvas & tarp textiles, ropes, synthetic leather substrates and package textiles.
• Growth will be seen especially in the following sectors in the coming five years               

                  Filtration & separation textiles
                  Medical & hygiene textiles
                  Geotechnical textil
                  Structural reinforcement textiles
                  Transportation textiles
                  Protective textiles

Nonwovens

• China accounted for 10.5% of global nonwovens imports in 2015.
• China alone will account for around 57% of the Asian consumption of nonwovens from 2016 to 2020.
• According to the China Nonwovens & Industrial Textiles Association (CNITA), the following nonwoven sectors will experience the highest growth in this period:

                 Environmental protection
                 Medical, healthcare and elderly care
                 Emergency services and public security
                 New-energy automotive
                ‘Belt and Road’ supporting industries

Man-made fibres

• China currently accounts for 65% of world market share of man-made fibres, with demand in the wider Asian region expected to remain strong in coming years thanks to growing populations and rising living standards in China and emerging Asian countries.
• The driving force is not only clothing, but also new applications such as the filtration, construction, protection and transportation industries.

The two AZL Partners Conbility GmbH and Fraunhofer IPT, Aachen started their long-term cooperation for the further development and for the commercialization of Fraunhofer´s tape-placement and tape winding systems with in-situ-consolidation by the usage of laser or IR heat sources.

With this cooperation, the company Conbility GmbH makes 25 years of expertise in special machine development of tape placement systems of the Fraunhofer Institute for Production Technology IPT commercially available. Conbility offers two different tape processing systems available in different configurations.

The “PrePro 2D” machine system allows for the automated tailored tape placement of UD laminates and which can be used for subsequent thermoforming or as stiffening structures in injection molding processes. The machine comprises a rotating and translational table which is moved relatively to the applicator station. The table is scalable according to the requirements of customers. Standard table diameters are 1200 mm or 2000 mm. The applicator station can be equipped with a single or with multiple spool applicators. Because of the large process area, a 9 kW IR heater is used for the in-situ-consolidation process.  
Three in one: Three technologies included in one single modular system
Furthermore, the award-winning “PrePro 3D” tape placement and winding applicator is available as modular product with decentral control system (including closed-loop control of energy input into the processing zone) for the “plug-in” implementation in existing robot systems or machine systems by standard interfaces for the communication with the master control system. Conbility provides the single applicator as well as turn-key ready systems including the robot and handling systems.

Unique selling point of the PrePro 3D system is its multifunctional range of usage: it accomplishes laser-assisted thermoplastic tape placement, IR-assisted thermoset prepreg placement and dry fiber placement: Three technologies included in one single modular system.  

During the JEC World in Paris (March 6th – 8th 2018), Conbility GmbH will present its new “VCSEL Tape Placement and Winding Applicator” (Fig. 3), developed in cooperation with Fraunhofer IPT and Philips Photonics at the AZL Composites in Action area (Hall 5A, C55).

VCSEL Laser Systems as heat source for lower investment and process costs
This applicator uses an integrated VCSEL Laser System as heat source which has been developed by Philips Photonics. This tape placement and winding applicator can also be integrated as modular “plug-in” system into industrial jointed-arm and linear gantry robots in variable manufacturing cells. Using the new VCSEL Laser as heat source (VCSEL: Vertical-Cavity Surface Emitting Laser) leads to significant lower investment and process cost in comparison to other laser systems. Furthermore, the VCSEL laser system can accomplish controllable in-process adjustments of the laser-spot geometry as well as the intensity distribution within the spot size during the process (in-process control of laser-spot geometries and intensities) for the first time. The new system with 2 kW laser power and 10 separate emission zones which can be controlled separately will be shown at JEC World in Paris 2018 as new product of Conbility GmbH.

• Subtly accentuated classics and vibrant colors in sportswear

The collections are evolving, featuring a sharpened profile and improved focus. In narrowing the focus, eye-catchers and favorite pieces become even more important. At the same time every brand has to carefully consider where and how it wants to position itself. Trims and accessories, especially buttons, are an ideal way of harnessing and playing to this trend. The broad variety of classic pieces for Season SS 19 is also reflected in the diversity of trims and accessories used. Garment and button enter into a dialogue that, while subtle, is always valuable, even when it’s just about playing with contrasts. By setting a particular accent, the button completes the look, playing its role as a key piece.

Formal wear:

Vegetable ivory in a variety of finishes is a key material for summer. In a light bone color it emphasizes the texture and colorfulness of natural materials, lending them a distinct touch of sophistication.

Echt Perlmutt Twice brings an element of tension to high-end classic looks through subtle material contrasts and a subdued interplay of color

The AZL will continue its collaboration on composites in buildings and infrastructure after completing an initial market and technology study which identified new potentials for composite technologies in buildings and infrastructure markets. The aim of the new AZL Workgroup which will meet for the first time on January 25th, 2018 is to jointly develop new applications and to support the business development for composites in these two growing markets. The meeting is open to interested companies from the composite industry as well as the building and infrastructure markets.

The aim of the initial workgroup meeting will be to turn insights from the study into a long-term workgroup collaboration and to define topics and initiatives for the joint cooperation in the field of process and manufacturing technologies, fire safety regulations, materials as well as standards and norms. Industrial keynote presentations will introduce these action fields and will provide an insight into building and infrastructure applications for composites. The meeting will furthermore provide a platform to network with companies along the entire composite value chain.

Dr. Amer Affan, CEO and founder of AFFAN Innovative Structures based in Dubai is in charge of various composite projects for buildings such as the Museum of the Future in Dubai: “We have been utilizing structural composites in construction since 2010. Composites is a truly high-tech material compared with the traditional building materials (steel, concrete, timber and aluminum) but it is still to be recognized as such in the conservative and price-sensitive building industry. AZL, particularly its location at the RWTH Aachen University and its partner companies, offers a good platform to progress the use of composites in construction.”

AZL together with more than 25 companies just completed the Joint Market and Technology Study on “New Potentials for Composite Technologies in Buildings and Infrastructure” establishing a broad knowledge on business opportunities for composite technologies in these two growing markets. In a structured approach, the study determined the key segments as well as the technologies/applications with the highest market and technological potential. Analyses of 20 market segments, investigation of 438 applications, technology analyses of 25 highlight components and 11 detailed business cases were elaborated throughout the study. Additional to requirement analyses for materials and production technologies, new concepts for efficient profitable production technologies and cost engineering analysis were developed. With the workgroup, the AZL will take this initiative a step further with the aim to build a long-term cooperation platform for composites in buildings and infrastructure markets.

Justin Jin, CEO of the Korean company AXIA Materials participated in the study and is part of the AZL Partner Network: “As producer of large thermoplastic composite sheets and composite SIP (Structural Insulated Panel), we are eager to drive composites in B&I applications with the best efficient way. The AZL study on Buildings and Infrastructure provided us a great networking with key players in this business field and opportunities to strengthen our products with the key elements from partners. The study also gave us a proper market understanding including market size/volume in numbers to prove the value of this technology to building industry. We are looking forward to following up on these first insights and to realize applications with the AZL and its partners.”

Besides the networking options, the meeting will offer the opportunity to get an insight into the activities of the AZL Network consisting of nine research institutes at the RWTH Aachen Campus and more than 80 companies from 21 countries. During an optional guided tour, participants will visit selected institutes at the RWTH Aachen Campus. The meeting is open to all interested companies and free of charge.

More Information on Meeting and the Study
Information on AZL activities in the field of buildings and infrastructure:
www.azl-lightweight-production.com/composites-buildings-infrastructure
Details and registration to first Workgroup Meeting on January 25th, 2018:
http://www.azl-lightweight-production.com/termine/1st-workgroup-meeting-buildings-infrastructure