From the Sector

Reset
835 results
(c) Carbios
15.02.2023

Carbios: Four new Board members to strengthen international expertise

  • Carbios strengthens its Board of Directors with the appointments of Prof. Karine AUCLAIR, Sandrine CONSEILLER, Amandine DE SOUZA and Mateus SCHREINER GARCEZ LOPES
  • Carbios has reached its CSR objective of 60% independent directors ahead of 2024 target date, and has increased its female representation

Carbios‘four new members to its Board of Directors:  Prof. Karine AUCLAIR, professor of Chemistry at McGill University, Sandrine CONSEILLER, former CEO of Aigle, Amandine DE SOUZA, General Manager of LE BHV MARAIS, Eataly and Home, DIY and Leisure Purchasing at Galeries Lafayette Group, and Mateus SCHREINER GARCEZ LOPES, Global Director for Energy Transition and Investments at Raizen, have all been appointed members of Carbios’ Board of Directors.  In the new structure, Prof. Karine AUCLAIR succeeds Jacqueline LECOURTIER, Sandrine CONSEILLER succeeds Jean FALGOUX, Amandine DE SOUZA succeeds Alain CHEVALLIER, and Mateus SCHREINER GARCEZ LOPES succeeds Jean-Claude LUMARET.

  • Carbios strengthens its Board of Directors with the appointments of Prof. Karine AUCLAIR, Sandrine CONSEILLER, Amandine DE SOUZA and Mateus SCHREINER GARCEZ LOPES
  • Carbios has reached its CSR objective of 60% independent directors ahead of 2024 target date, and has increased its female representation

Carbios‘four new members to its Board of Directors:  Prof. Karine AUCLAIR, professor of Chemistry at McGill University, Sandrine CONSEILLER, former CEO of Aigle, Amandine DE SOUZA, General Manager of LE BHV MARAIS, Eataly and Home, DIY and Leisure Purchasing at Galeries Lafayette Group, and Mateus SCHREINER GARCEZ LOPES, Global Director for Energy Transition and Investments at Raizen, have all been appointed members of Carbios’ Board of Directors.  In the new structure, Prof. Karine AUCLAIR succeeds Jacqueline LECOURTIER, Sandrine CONSEILLER succeeds Jean FALGOUX, Amandine DE SOUZA succeeds Alain CHEVALLIER, and Mateus SCHREINER GARCEZ LOPES succeeds Jean-Claude LUMARET.

Three of the new members have strong, proven expertise in various industries covering fashion, retail and energy, as well as business development and senior executive management in high-growth markets and sectors around the world.  The new scientific expertise will also help enhance and advance Carbios’ research into biological solutions for the life cycle of plastics and textiles.  In addition, a sensitivity to CSR issues and proven results in this field was also a key selection factor to join the Board.  The new members’ combined strategic vision, solid industry experience and CSR commitments will support Carbios in its industrial and commercial plans.
 
Prof. Karine AUCLAIR is Professor of Chemistry at McGill University and holds the Tier 1 Canada Research Chair in Antimicrobials and Green Enzymes.  She has received numerous awards over the years, including the Clara Benson Award of the Canadian Society of Chemistry, the McGill Tomlinson Professorship, the Leo Yaffe Teaching Award, and the McGill Fessenden Professorship, to name a few. She is an internationally recognized bioorganic chemist with significant scientific contributions to the fields of antimicrobial resistance, biocatalysis and enzymology. Her research led to several patents notably in the clean enzymatic depolymerization of untreated, high crystallinity PET plastics for closed-loop recycling.  Her work has been published in nearly 100 peer-reviewed publications in high-impact journals, and often highlighted by the media.  As a recognized leader in her field, she is often invited to speak at industrial and academic conferences around the world, and to review theses and grant applications for worldwide institutions.
 
Sandrine CONSEILLER is former Chief Executive Officer of Aigle (the emblematic French brand committed to sustainable fashion).  Prior to joining Aigle, Sandrine was Group Marketing & Branding Executive Vice-President at Lacoste (another historic French fashion brand) from 2011 to 2015.  She contributed to the Lacoste maison turnaround with strong growth and numerous professional awards including several Cannes Lions Awards.  She was also Member of the Executive Board.  Sandrine began her career at Unilever and spent 20 years leading global businesses within various divisions, mainly in Personal Care, in Latin America, Europe, and Asia.  Sandrine is also Member of the Board of Phildar (the iconic French knitwear brand), Member of the Board of Raise Sherpa (the first philantropic endowment fund dedicated to start-ups) and is a funding partner of NEO FOUNDERS (a venture fund mentoring impact start-ups).
 
Amandine DE SOUZA is General Manager of LE BHV MARAIS (French retail, decoration and fashion department stores), Eataly (an Italian gastronomy concept franchise) and Home, DIY and Leisure Purchasing at Galeries Lafayette Group since 2018.  She has been a Member of its Executive Committee since 2020.  Amandine has 17 years’ experience in different types of companies of various sizes: from family business, to start-up,  and multinational.  She was General Manager for France at Westwing (an e-commerce start-up) from 2015 to 2018.  From 2009 to 2015, she was International Merchandise Director at Casino Group (food and non-food retail distribution).  Prior to this, she worked as a strategic consultant at Bain & Company within their Distribution and Consumer Goods Division in France and internationally.
 
Mateus SCHREINER GARCEZ LOPES is Global Director for Energy Transition and Investments at Raizen (global leader in bioenergy from Brazil), leading technology, new business development and intellectual property at the company.  He was previously Global Manager for Innovation and Business Development in Renewable Chemicals at Braskem (the largest producer of thermoplastic resins in the Americas and the world’s largest producer of biopolymers).  Before his transition to the corporate world, Mateus held several researcher and lecturer positions on Synthetic Biology and metabolic Engineering at Universities in Mexico, Germany, United States and Brazil.  He is also a Board Member of Iogen Energy Corporation, Vice-Chairman of the Board of the Brazilian Association of Bio Innovation, and Advisory Committee Member from the MIT Energy Initiative.

More information:
Carbios
Source:

Carbios

(c) Perstorp
15.02.2023

Perstorp: Reduction targets for water and waste

Sustainable solutions provider Perstorp has added new corporate sustainability targets, for water and waste, to its sustainability strategy. Its long-term sustainability ambition is to become Finite Material Neutral, which involves water and waste, along with raw materials, energy and catalysts. In 2021 the company set its first 2030 targets, for greenhouse gas emissions (using approved science-based targets) and (eco) toxic impact. Now Perstorp has added new sustainability targets that will address its long-term ambition.

These new 2030 corporate targets (all measured using 2019 as the base year) are:

Sustainable solutions provider Perstorp has added new corporate sustainability targets, for water and waste, to its sustainability strategy. Its long-term sustainability ambition is to become Finite Material Neutral, which involves water and waste, along with raw materials, energy and catalysts. In 2021 the company set its first 2030 targets, for greenhouse gas emissions (using approved science-based targets) and (eco) toxic impact. Now Perstorp has added new sustainability targets that will address its long-term ambition.

These new 2030 corporate targets (all measured using 2019 as the base year) are:

  • 30% absolute reduction of freshwater consumption
  • 30% absolute reduction of hazardous waste directed to disposal
  • 30% absolute reduction of non-hazardous waste directed to disposal

"Fresh water consumption and waste are two areas of big importance in reducing our environmental impact and working toward increased circularity," says Anna Berggren, Vice President Sustainability at Perstorp Group. "Fresh water scarcity is already a fact around the world, and we have a responsibility to reduce our consumption and utilize alternative water sources. We must also minimize waste generation and find new circular solutions of reusing and recycling the waste streams into new products, either ourselves or so that a third party can use them as raw material. We have set ambitious and absolute sustainability targets, that are to be achieved regardless of production growth. To be able to reach these targets we have several large projects planned that will contribute significantly."

All Perstorp production plants use water for multiple purposes, including, for example: for cooling, as a solvent for chemical reactions, as a carrier for products, and as a heat-transfer medium. One way to reduce fresh water consumption is to purify and recycle wastewater. Perstorp sees this as an important core technology and is planning to invest in wastewater recycling projects at several of its production sites.

A key to reducing waste directed to disposal is to develop circular solutions that use waste streams as raw materials for new products. One example is Project Air, in which captured carbon dioxide together with residue streams from Perstorp's production plant in Stenungsund, Sweden, will serve as raw material for production of sustainable methanol that will replace all the virgin fossil methanol used by Perstorp in Europe.

15.02.2023

Yanfeng recognized for global environmental leadership

Automotive supplier, Yanfeng has been awarded a second consecutive A−rating by Carbon Disclosure Project (CDP) for the group's global leadership in transparency and action on climate change in 2022. Nearly 15,000 companies were rated based on data which they submitted to the organization. Yanfeng also received an Environmental Leadership Award by CDP China

CDP is a non-profit organization which operates a global disclosure system to enable investors, companies, cities, states, and regions to manage their environmental impacts. Every year, several thousand companies worldwide are analyzed about their strategic approach to the challenges of climate change and their climate management activities are rated on the basis of a comprehensive list of criteria. CDP’s annual environmental disclosure and rating process is widely recognized as the gold standard for corporate environmental transparency.

Automotive supplier, Yanfeng has been awarded a second consecutive A−rating by Carbon Disclosure Project (CDP) for the group's global leadership in transparency and action on climate change in 2022. Nearly 15,000 companies were rated based on data which they submitted to the organization. Yanfeng also received an Environmental Leadership Award by CDP China

CDP is a non-profit organization which operates a global disclosure system to enable investors, companies, cities, states, and regions to manage their environmental impacts. Every year, several thousand companies worldwide are analyzed about their strategic approach to the challenges of climate change and their climate management activities are rated on the basis of a comprehensive list of criteria. CDP’s annual environmental disclosure and rating process is widely recognized as the gold standard for corporate environmental transparency.

Yanfeng improved its scores in value chain engagement and climate-related requirements for suppliers, as well as targets for increasing low-carbon energy consumption or production.
“As our company-wide target for carbon neutrality, we aim to achieve 100% of our total energy consumption from renewable energy sources by 2030,” said Gunnar Büchter, Vice President of Global Sustainability at Yanfeng. All European plants converted to renewable energy by the beginning of 2022, and other regions also increased their utilization of renewable energy sources. Significant progress has been made in China. By end of 2021 a total of 30% of energy came from renewable sources.

13.02.2023

CELLIANT cleared to market in 50+ countries

  • Registered in majority as a class 1 medical device  

CELLIANT -  a performance textile that converts body heat into infrared energy - is designated as a Class 1 Medical Device in Australia, Canada, the EU and European Economic Area (EEA), Japan, New Zealand, the United Arab Emirates, the United Kingdom and the United States. CELLIANT is cleared to market in China, India, Indonesia, Korea, Malaysia, Mexico, Peru, Philippines, Russia, Saudi Arabia, Singapore, South Africa, Taiwan, Thailand and Vietnam, with more countries and regions to follow.

  • Registered in majority as a class 1 medical device  

CELLIANT -  a performance textile that converts body heat into infrared energy - is designated as a Class 1 Medical Device in Australia, Canada, the EU and European Economic Area (EEA), Japan, New Zealand, the United Arab Emirates, the United Kingdom and the United States. CELLIANT is cleared to market in China, India, Indonesia, Korea, Malaysia, Mexico, Peru, Philippines, Russia, Saudi Arabia, Singapore, South Africa, Taiwan, Thailand and Vietnam, with more countries and regions to follow.

In 2017, the FDA determined that products containing CELLIANT are medical devices as defined in section 201(h) of the Federal Food, Drug and Cosmetic Act and are general wellness products because they are intended to temporarily increase blood flow and local circulation at the site of the application in healthy individuals.
 
At Hologenix®, whose CELLIANT® infrared technology is an ingredient in world-class brands across many categories, science matters. The company has a distinguished Science Advisory Board composed of experts in the fields of photobiology, nanotechnology, sleep medicine, diabetes and wound care. The Science Advisory Board has overseen nine peer-reviewed published studies that collectively demonstrate CELLIANT’s effectiveness and the benefits of infrared energy. This claim set provides the basis for products containing CELLIANT to be designated as a Class 1 Medical Device in 38 countries and cleared to market in 15, with more countries and regions to follow. This elevated status in 53 countries translates to CELLIANT being an ideal partner for global companies who are seeking innovation in textiles to distinguish their products.   

“We have laid the groundwork for our partner brands to capitalize on the benefits of our infrared technology and to enhance their ability to do business,” said Seth Casden, Hologenix co-founder and CEO.  “We firmly believe that regulatory status matters and that is why we have grown the number of countries we have such relationships with by over a third in the last three years. It is definitely a competitive advantage of our company and CELLIANT.”

“Globally, the awareness of the benefits of infrared textiles, which absorb body heat and reflect it back as therapeutic infrared energy, has grown exponentially over the last 10 years,” continued Casden. “And in the United States infrared is gaining a strong foothold.”

Source:

Hologenix

08.02.2023

ECHA publishes PFAS restriction proposal

The details of the proposed restriction of around 10 000 per- and polyfluoroalkyl substances (PFASs) are now available on ECHA’s website. ECHA’s scientific committees will now start evaluating the proposal in terms of the risks to people and the environment, and the impacts on society.

The proposal was prepared by authorities in Denmark, Germany, the Netherlands, Norway and Sweden and submitted to ECHA on 13 January 2023. It aims to reduce PFAS emissions into the environment and make products and processes safer for people.

All PFASs in the scope of the proposal are very persistent in the environment. If their releases are not minimised, people, plants and animals will be increasingly exposed, and without a restriction, such levels will be reached that have negative effects on people’s health and the environment. The authorities estimate that around 4.4 million tonnes of PFASs would end up in the environment over the next 30 years unless action is taken.

The details of the proposed restriction of around 10 000 per- and polyfluoroalkyl substances (PFASs) are now available on ECHA’s website. ECHA’s scientific committees will now start evaluating the proposal in terms of the risks to people and the environment, and the impacts on society.

The proposal was prepared by authorities in Denmark, Germany, the Netherlands, Norway and Sweden and submitted to ECHA on 13 January 2023. It aims to reduce PFAS emissions into the environment and make products and processes safer for people.

All PFASs in the scope of the proposal are very persistent in the environment. If their releases are not minimised, people, plants and animals will be increasingly exposed, and without a restriction, such levels will be reached that have negative effects on people’s health and the environment. The authorities estimate that around 4.4 million tonnes of PFASs would end up in the environment over the next 30 years unless action is taken.

Peter van der Zandt, ECHA’s Director for Risk Assessment said: “This landmark proposal by the five authorities supports the ambitions of the EU’s Chemicals Strategy and the Zero Pollution action plan. Now, our scientific committees will start their evaluation and opinion forming. While the evaluation of such a broad proposal with thousands of substances, and many uses, will be challenging, we are ready.”

Next steps
ECHA’s scientific committees for Risk Assessment (RAC) and for Socio-Economic Analysis (SEAC) will check that the proposal meets the legal requirements of REACH in their meetings in March 2023. If it does, the committees will begin their scientific evaluation of the proposal. A six-month consultation is planned to start on 22 March 2023.

RAC will form an opinion on whether the proposed restriction is appropriate in reducing the risks to people’s health and the environment, while SEAC’s opinion will be on the socio-economic impacts, i.e. benefits and costs to society, associated with the proposal. Both committees form their opinions based on the information in the restriction proposal and the comments received during consultations. The committees also consider advice from the Enforcement Forum on the enforceability of the proposed restriction. Once the opinions are adopted, they will be sent to the European Commission who, together with the EU Member States, will then decide on the potential restriction.

An online information session will be organised on 5 April 2023 to explain the restriction process and to help those interested in participating in the consultation.

More information:
ECHA PFAS polyfluoroalkyl
Source:

European Chemicals Agency

(c) INDA
08.02.2023

INDA: Mark Snider as Chief Market and Industry Analyst

INDA, the Association of the Nonwoven Fabrics Industry, has named Mark Snider to the position of Chief Market and Industry Analyst. Snider brings more than 30 years of nonwovens & engineered materials expertise with a strong background in market and industry analysis at both the macroeconomic, industry and segment level.

Before starting his consulting firm sixteen years ago, he supported three divisions as Technical Marketing Manager for Nordson Corporation, and as European and Latin American Regional Manager for J&M Laboratories.

Snider’s industry knowledge, and extensive network combined with his research and analytical skills will provide decision-making data, reports, and presentation to INDA members and the industry.

Snider will expand upon INDA’s membership outreach and research initiated by MaryJo Lilly, INDA’s Market Intelligence Leader, to realize INDA’s new vision for industry intelligence. Lilly will continue to assess strategic market research initiatives and special projects.

INDA, the Association of the Nonwoven Fabrics Industry, has named Mark Snider to the position of Chief Market and Industry Analyst. Snider brings more than 30 years of nonwovens & engineered materials expertise with a strong background in market and industry analysis at both the macroeconomic, industry and segment level.

Before starting his consulting firm sixteen years ago, he supported three divisions as Technical Marketing Manager for Nordson Corporation, and as European and Latin American Regional Manager for J&M Laboratories.

Snider’s industry knowledge, and extensive network combined with his research and analytical skills will provide decision-making data, reports, and presentation to INDA members and the industry.

Snider will expand upon INDA’s membership outreach and research initiated by MaryJo Lilly, INDA’s Market Intelligence Leader, to realize INDA’s new vision for industry intelligence. Lilly will continue to assess strategic market research initiatives and special projects.

(c) AkzoNobel
01.02.2023

AkzoNobel using 100% renewable electricity in North America

All of AkzoNobel’s locations in North America are now operating on 100% renewable electricity – helping to drive the company’s ambition of reducing carbon emissions across the full value chain by 50% by 2030 (baseline 2018).

The milestone – reached at the beginning of the year – is the latest in AkzoNobel’s ongoing efforts to transition to 100% renewable electricity at all its sites globally, with Europe having achieved the landmark at the start of 2022.  

The transition to 100% renewable electricity in North America includes manufacturing sites, offices, warehouses and research and development facilities. However, the company is looking much further than its own operations.
Examples of how AkzoNobel is moving to 100% renewable electricity globally include:

All of AkzoNobel’s locations in North America are now operating on 100% renewable electricity – helping to drive the company’s ambition of reducing carbon emissions across the full value chain by 50% by 2030 (baseline 2018).

The milestone – reached at the beginning of the year – is the latest in AkzoNobel’s ongoing efforts to transition to 100% renewable electricity at all its sites globally, with Europe having achieved the landmark at the start of 2022.  

The transition to 100% renewable electricity in North America includes manufacturing sites, offices, warehouses and research and development facilities. However, the company is looking much further than its own operations.
Examples of how AkzoNobel is moving to 100% renewable electricity globally include:

  • Self-generated renewable electricity – by installing solar panels at many of their locations and continue to make steady progress
  • Sourcing renewable electricity – the electricity generated by their solar panels covers only part of their total electricity consumption needs. For the remainder, they'll continue to purchase renewable electricity with certificates of origin.
Source:

AkzoNobel

01.02.2023

Carbios appoints new Executive Committee Members

Carbios has strengthened its leadership team with the appointment of Martine Brisset as Senior Vice President from 1 January 2023. Martine will manage the Biodegradation Division and supervise the Human Resources, Legal, Regulatory, Project Management, Quality Health and Safety departments. Martine Brisset joins the Group’s Executive Committee, as does Delphine Denoizé, who remains Innovation Programs Funding, Regulation and LCA Director with an expanding team.

Carbios has strengthened its leadership team with the appointment of Martine Brisset as Senior Vice President from 1 January 2023. Martine will manage the Biodegradation Division and supervise the Human Resources, Legal, Regulatory, Project Management, Quality Health and Safety departments. Martine Brisset joins the Group’s Executive Committee, as does Delphine Denoizé, who remains Innovation Programs Funding, Regulation and LCA Director with an expanding team.

Martine Brisset has over 30 years of General Management experience in international groups within the plastic and paper packaging industry, most notably at Amcor, Huhtamaki, Linpac and Klockner Pentaplast.  Since 2021, she has held the position of General Manager of Carbiolice in order to integrate this high-potential subsidiary dedicated to biodegradation within the Carbios Group. In her new position as Senior Vice President of Carbios, her main mission will be to successfully deploy the biodegradation technology, facilitate the international expansion of Carbios’ activities, organise the recruitment and training of the Group’s employees. With numerous recruitments planned throughout the company in 2023, building Carbios’ attractivity will be a strategic topic.

After several years working in innovation within the agricultural industry, Delphine Denoizé joined the Carbios in 2016 and was one of its first twenty employees. Initially in charge of Innovation Funding and Regulation, then Project Management for PET biorecycling, she now oversees all the Group’s projects. Her responsibilities include French and European public funding for innovation, regulatory compliance of processes and products around the world, and assessment of their environmental impact through specific tools such as Life Cycle Assessment.

More information:
Carbios Recycling plastics
Source:

Carbios

27.01.2023

SMCCREATE 2023: Call for Speakers

The AVK Working Group SMC/BMC and the European Alliance for SMC BMC are jointly organising SMCCreate 2023 - a conference on designing with SMC and BMC composites. The event, which offers insights into the entire product design process from idea to part manufacture, is aimed at both experienced designers and those new to the use of these materials.

Around 60 participants from all over Europe attended the first SMCCreate design conference, which took place in Antwerp in June 2022. SMCCREATE 2023 will take place in Prague (Czech Republic) on 7-8 November 2023 at the Vienna House by Wyndham Diplomat Prague; conference language is English. After a successful launch, AVK and the European Alliance for SMC BMC are looking forward to the second edition of the event and invite speakers to apply with their presentation proposals by 27 February. (Mail address: info@avk-tv.de).

The AVK Working Group SMC/BMC and the European Alliance for SMC BMC are jointly organising SMCCreate 2023 - a conference on designing with SMC and BMC composites. The event, which offers insights into the entire product design process from idea to part manufacture, is aimed at both experienced designers and those new to the use of these materials.

Around 60 participants from all over Europe attended the first SMCCreate design conference, which took place in Antwerp in June 2022. SMCCREATE 2023 will take place in Prague (Czech Republic) on 7-8 November 2023 at the Vienna House by Wyndham Diplomat Prague; conference language is English. After a successful launch, AVK and the European Alliance for SMC BMC are looking forward to the second edition of the event and invite speakers to apply with their presentation proposals by 27 February. (Mail address: info@avk-tv.de).

The aim of the conference is to help designers and engineers choose the best material solution for their applications. Presentations will focus on best practices and industrial solutions, SMC and BMC component manufacturing, material selection and product development throughout the product life cycle, from design to sustainability.

(Mail address: info@avk-tv.de).

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

Photo: Rieter
Thomas Oetterli
25.01.2023

Rieter: Thomas Oetterli new CEO

Norbert Klapper, who has led Rieter as CEO for nine years, has informed the Board of Directors that he wishes to take on new professional challenges. Thomas Oetterli has been appointed as his successor as CEO of Rieter.

Thomas Oetterli (53) has made a significant contribution to the successful development of the world-leading Schindler Group, starting in 2006 as CEO Switzerland, later as a member of the Group Executive Committee responsible for Europe and China, and from 2016 until 2022 as CEO of the Group. With his comprehensive leadership skills and many years of industrial and international experience, Thomas Oetterli brings ideal prerequisites to lead Rieter as a global market leader through the current challenges and successfully develop it further in the long term. He will take over the function of CEO from Norbert Klapper on March 13, 2023.

Norbert Klapper, who has led Rieter as CEO for nine years, has informed the Board of Directors that he wishes to take on new professional challenges. Thomas Oetterli has been appointed as his successor as CEO of Rieter.

Thomas Oetterli (53) has made a significant contribution to the successful development of the world-leading Schindler Group, starting in 2006 as CEO Switzerland, later as a member of the Group Executive Committee responsible for Europe and China, and from 2016 until 2022 as CEO of the Group. With his comprehensive leadership skills and many years of industrial and international experience, Thomas Oetterli brings ideal prerequisites to lead Rieter as a global market leader through the current challenges and successfully develop it further in the long term. He will take over the function of CEO from Norbert Klapper on March 13, 2023.

The Board of Directors would like to thank Norbert Klapper for his many years of hard work for Rieter and his lasting contribution to the company, particularly in terms of further strengthening its technology leadership, developing the components and service business, completing the systems offering. Following his departure as CEO, he will be available to the Chairman of the Board of Directors as Senior Advisor until the end of September 2023.

In view of the current challenges Rieter is facing in the current economic and market situation, which require close cooperation between the Board of Directors and the Group Executive Committee, the Board of Directors considers a dual function of Thomas Oetterli as CEO and member of the Board of Directors to be advantageous and in the interest of all stakeholders. It will therefore propose Thomas Oetterli for election as a member of the Board of Directors at the upcoming Annual General Meeting on April 20, 2023.

Source:

Rieter Holding AG

(c) nova-Institut GmbH
24.01.2023

Six nominees for„Cellulose Fibre Innovation of the Year 2023“

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

Here are the six nominees
Vybrana – The new generation banana fibre – GenCrest Bioproducts (India)

Vybrana is a Gencrest’s Sustainable Cellulosic Fibre upcycled from agrowaste. Raw fibres are extracted from the Banana Pseudo stem at the end of the plant lifecycle. The biomass waste is then treated by the Gencrest patented Fiberzyme technology. Here, cocktail enzyme formulations remove the high lignin content and other impurities and help fibre fibrillation. The company's proprietary cottonisation process provides fine, spinnable cellulose staple fibres suitable for blending with other staple fibres and can be spun on any conventional spinning systems giving yarns sustainable apparel. Vybrana is produced without the use of heavy chemicals and minimized water consumption and in a waste-free process where balance biomass is converted to bio stimulants Agrosatva and Bio Fertilizers & organic manure.

HeiQ AeoniQ™ – technology for more sustainability of textiles – HeiQ (Austria)
HeiQ AeoniQ™ is the disruptive technology and key initiative from HeiQ with the potential to change the sustainability of textiles. It is the first climate-positive continuous cellulose filament yarn, made in a proprietary manufacturing process and the first to reproduce the properties of polyester and nylon yarns in a cellulosic, biodegradable, and endlessly recyclable fibre.
HeiQ AeoniQ™ can be manufactured from different cellulosic raw materials such as pre- and post-consumer textile waste, biotech cellulose, and non-valorized agricultural waste, such as ground coffee waste or banana peels. It naturally degrades after only 12 weeks in the soil. Each ton of HeiQ AeoniQ™ saves 5 tons of CO2 emissions. The first garments made with this innovative cellulosic filament fiber were commercially launched in January 2023.

TENCEL™ LUXE – lyocell filament yarn – Lenzing (Austria)
TENCEL™ LUXE is LENZING’s new versatile lyocell yarn that offers an urgently needed sustainable filament solution for the textile and fashion industry. A possible botanical alternative for silk, long-staple cotton, and petrol-based synthetic filaments, is derived from wood grown in renewable, sustainably managed forests, and produced in an environmentally sound, closed-loop process that recycles water and reuses more than 99 % of organic solvent. Certified by The Vegan Society, it is suitable for a wide range of applications and fabric developments, from finer high fashion propositions to denim constructions, seamless and activewear innovations, and even agricultural and technical solutions.

Nullarbor™ – Nanollose & Birla Cellulose (Australia/India)
In 2020, Nanollose & Birla Cellulose started a journey to develop and commercialize tree-free lyocell from bacterial cellulose, called Nullarbor™. The name derives from the Latin “nulla arbor” which means “no trees”. Initial lab research at both ends led to a joint patent application with the patent “production of high-tenacity lyocell fibres made from bacterial cellulose”.
Nullarbor is significantly stronger than lyocell made from wood-based pulp; even adding small amounts of bacterial cellulose to wood pulp increases the fibre toughness. In 2022, the first pilot batch of 260kg was produced with 20 % bacterial pulp share. Several high-quality fabrics and garments were produced with this fibre. The collaboration between Nanollose & Birla Cellulose now focuses on increasing the production scale and amount of bacterial pulp in the fibre.

Circulose® – makes fashion circular – Renewcell (Sweden)
Circulose® made by Renewcell is a branded dissolving pulp made from 100 % textile waste, like worn-out clothes and production scraps. It provides a unique material for fashion that is 100 % recycled, recyclable, biodegradable, and of virgin-equivalent quality. It is used by fibre producers to make staple fibre or filaments like viscose, lyocell, modal, acetate or other types of man-made cellulosic fibres. In 2022, Renewcell, opened the world’s first textile-to-textile chemical recycling plant in Sundsvall, Sweden – Renewcell 1. The plant will eventually reach 120,000 tons of annual capacity.

Sparkle sustainable sanitary pads – Sparkle Innovations (United States)
Globally, around 300 billion period products are discarded every year, resulting in millions of tons of non-biodegradable waste. Since most conventional sanitary pads contain up to 90 % plastics, they do not biodegrade for around 600 years. Sparkle has designed sustainable, plastic-free, biodegradable and compostable Sparkle sanitary pads. From product to packaging, they are made up of around 90 % cellulose-based materials with top sheet, absorbent core, release paper, wrapping paper and packaging made of cellulose-based fibres. Whether Sparkle pads end up in a compost pit, are incinerated or end up in a landfill, they are a more sustainable alternative compared to conventional pads that contain large amounts of plastics, complex petro-chemical based ingredients and artificial fragrances. When tested according to ISO 14855-1 by a leading independent lab in Europe, Sparkle pads reached over 90 % absolute biodegradation within 90 days in commercial composting conditions.

(c) AkzoNobel
20.01.2023

AkzoNobel again a European Top Employer

AkzoNobel has been rated as a European Top Employer by the Top Employers Institute for the second consecutive year.

In the latest benchmark review, the company has been recognized in eight countries – Brazil, China, France, Germany, the Netherlands, Sweden, the UK and the US – all of them repeat certifications. AkzoNobel qualifies as a European Top Employer because five of the certified countries are in Europe.

Each year, the Top Employers Institute certifies organizations who are focused on putting people first through their HR policies. The survey covers six HR domains consisting of 20 topics, including people strategy, work environment, talent acquisition, learning, diversity and inclusion, and well-being.

The latest 2023 rating marks the second certification in a row for AkzoNobel in France, Germany and Sweden, the fourth for the Netherlands and the US, the seventh for Brazil, the tenth for China and the 11th for the UK.

AkzoNobel has been rated as a European Top Employer by the Top Employers Institute for the second consecutive year.

In the latest benchmark review, the company has been recognized in eight countries – Brazil, China, France, Germany, the Netherlands, Sweden, the UK and the US – all of them repeat certifications. AkzoNobel qualifies as a European Top Employer because five of the certified countries are in Europe.

Each year, the Top Employers Institute certifies organizations who are focused on putting people first through their HR policies. The survey covers six HR domains consisting of 20 topics, including people strategy, work environment, talent acquisition, learning, diversity and inclusion, and well-being.

The latest 2023 rating marks the second certification in a row for AkzoNobel in France, Germany and Sweden, the fourth for the Netherlands and the US, the seventh for Brazil, the tenth for China and the 11th for the UK.

Source:

AkzoNobel

20.01.2023

Third edition of the project "CirculART"

Art meets sustainable fashion in the third edition of the project "CirculART", the initiative that sees companies, artists and fashion designers working together with Cittadellarte - Fondazione Pistoletto, showing how new balanced forms of production, design and sharing can be explored through a careful choice of materials and of sustainable supply chains. Three key concepts underpin the circularity of sustainable fashion and therefore this project: Reduce - reducing the consumption of raw materials, Reuse - reuse of raw materials, Recycling - regeneration.

The project CirculART is conceived and developed in collaboration between Fashion B.E.S.T. and UNIDEE Residency Programs, and led by the Foundation's team of curators.

Art meets sustainable fashion in the third edition of the project "CirculART", the initiative that sees companies, artists and fashion designers working together with Cittadellarte - Fondazione Pistoletto, showing how new balanced forms of production, design and sharing can be explored through a careful choice of materials and of sustainable supply chains. Three key concepts underpin the circularity of sustainable fashion and therefore this project: Reduce - reducing the consumption of raw materials, Reuse - reuse of raw materials, Recycling - regeneration.

The project CirculART is conceived and developed in collaboration between Fashion B.E.S.T. and UNIDEE Residency Programs, and led by the Foundation's team of curators.

Fashion B.E.S.T. - Better Ethical Sustainable Think-Tank, Cittadellarte - Fondazione Pistoletto’ sustainable fashion office, was created by artist Michelangelo Pistoletto and Franca Sozzani. Since 2009, B.E.S.T. has been working on the development of sustainability in the textile sector, to lead to a contamination between art, which assumes social responsibility, and the world of fashion, which is looking to define a new ethical and sustainable model.

CirculART proposes a new link between fashion and art, engaging both in a conscious and innovative combination of sustainability, sensitivity, beauty and union. The project links territory and production factories, bringing together actors from the different sectors making up the textile supply chain that work on the basis of a circular economy with companies that have chosen to embrace the ideal of sustainability and develop an innovative business model.

The protagonists of this year’s edition are two international artists and two international fashion designers, selected through an open call launched by Cittadellarte: Augustina Bottoni, Lucia Chain, Huge Sillytoe and Rebecca Sforzani, young talents called upon to create a work with fabrics produced by partner companies, focusing on dialogue and on the enhancement of the textile industry production chain.

In early 2023, the programme will give the four selected artists the opportunity to visit and work actively with the partner companies that have joined the initiative.
These are: Achille Pinto S.p.a, manufacturer of textiles and textile accessories for the main international fashion brands; Albini Group, Europe's largest manufacturer of cotton fabrics for shirts; Erica Industria Tessile, a leading company in the creation of textile prints, original and customised designs; Filatura Astro, eco-sustainable regenerated yarns; G2B S.r.l., a chemical and environmental analysis laboratory working with vertical cultivation from which indigo is obtained; Lampo by Ditta Giovanni Lanfranchi S.p.A., leader in the creation and production of zips for fashion; Lanificio Fratelli Cerruti, a Biella-based weaver for haute couture; Lenzing, world leader in the production of fabrics made from fibres derived from renewable wood raw material; Milior, a producer of high quality fabrics; Officina +39 – Chemistry plus creativity, a chemical company with thirty years' experience dedicated to research and chemical application in textiles; Tessuti di Sondrio, a factory inspired by the century-old local textile tradition of processing cotton, linen, hemp and wool; Tintoria Emiliana, garment-dyed production and sustainable practices; Zegna Baruffa Lane Borgosesia, a manufacturer of 100% Made in Italy fine combed and carded yarns.

 

Source:

Officina +39 / Menabò Group srl

20.01.2023

Autoneum: Revenue growth in 2022

For the first time in two years, global automotive production recorded a significant increase in full-year 2022 with 82.0 million vehicles produced (2021: 77.2 million vehicles) and growth of 6.2%, driven by the regions Asia and North America, but remained below 2019 levels.
Autoneum's revenue in local currencies increased significantly by 8.5%, largely due to inflation-related compensation. In the regions Europe and Asia, Autoneum's production volumes developed below market. Compared to the July 2022 estimate, revenue was around CHF 90 million lower than assumed due to volume factors. The strong fluctuations in production volumes due to vehicle manufacturer supply chain issues continued in 2022 and were exacerbated by the war in Ukraine in Europe and by COVID-related lockdowns in Autoneum's Asian main market China. Consolidated revenue in Swiss francs increased by 6.1% year-on-year to CHF 1 804.5 million (2021: CHF 1 700.4 million) due to the strong Swiss franc.

For the first time in two years, global automotive production recorded a significant increase in full-year 2022 with 82.0 million vehicles produced (2021: 77.2 million vehicles) and growth of 6.2%, driven by the regions Asia and North America, but remained below 2019 levels.
Autoneum's revenue in local currencies increased significantly by 8.5%, largely due to inflation-related compensation. In the regions Europe and Asia, Autoneum's production volumes developed below market. Compared to the July 2022 estimate, revenue was around CHF 90 million lower than assumed due to volume factors. The strong fluctuations in production volumes due to vehicle manufacturer supply chain issues continued in 2022 and were exacerbated by the war in Ukraine in Europe and by COVID-related lockdowns in Autoneum's Asian main market China. Consolidated revenue in Swiss francs increased by 6.1% year-on-year to CHF 1 804.5 million (2021: CHF 1 700.4 million) due to the strong Swiss franc.

Revenue development in the regions
In local currencies, revenue of Business Group Europe increased by 2.7%, while production volumes of vehicle manufacturers decreased by 1.3%. The growth in revenue resulted from inflation compensation, while Autoneum's production volumes were significantly lower compared to the previous year. Business Group North America increased its revenue in local currencies by 11.0%. The number of vehicles produced increased by 9.7% year-on-year. Volume development at Autoneum’s North American plants clearly improved compared with 2021 due to the allocation of semiconductors to the vehicle models supplied by Autoneum. Revenue of Business Group Asia declined by 2.7% in local currencies, and thus was significantly below the market (+7.7%). Autoneum's production facilities in its main market China are located in regions that were hit particularly hard by the COVID-related lockdowns. Growth in China was also driven by Chinese vehicle manufacturers, with whom Autoneum generated only little revenue last year.
Business Group SAMEA (South America, Middle East and Africa) achieved hyperinflation-adjusted revenue growth in local currencies of 65.2% year-on-year. This increase was mainly due to inflation compensation and in terms of volume slightly outperformed the market, which grew by 7.5%.

Due to significantly lower production volumes in Autoneum's regions Europe and Asia of around CHF 90 million compared to the half-year estimate and further increases in energy costs in the second half of the year, Autoneum expects the full-year 2022 result to be at the lower end of the guidance published on June 15, 2022.

The full year-end financial statements and the Annual Report 2022 will be presented at the Media Conference on March 1, 2023.

Source:

Autoneum Management AG

17.01.2023

ECHA adds nine hazardous chemicals to Candidate List

ECHA has added nine chemicals to the Candidate List because of their hazardous properties. They are used for example in flame retardants, paints and coatings, inks and toners, coating products, plasticisers and in the manufacture of textile, leather or fur and paper.

Entries added to the Candidate List on 17 January 2023:

  • 1,1'-[ethane-1,2-diylbisoxy]bis[2,4,6-tribromobenzene]
  • 2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol
  • 4,4'-sulphonyldiphenol
  • Barium diboron tetraoxide
  • Bis(2-ethylhexyl) tetrabromophthalate covering any of the individual isomers and/or combinations thereof
  • Isobutyl 4-hydroxybenzoate
  • Melamine
  • Perfluoroheptanoic acid and its salts
  • reaction mass of 2,2,3,3,5,5,6,6-octafluoro-4-(1,1,1,2,3,3,3-heptafluoropropan-2-yl)morpholine and 2,2,3,3,5,5,6,6-octafluoro-4-(heptafluoropropyl)morpholine

Information on these substances' uses and reasons for inclusion on the Candidate List is available here.

 

ECHA has added nine chemicals to the Candidate List because of their hazardous properties. They are used for example in flame retardants, paints and coatings, inks and toners, coating products, plasticisers and in the manufacture of textile, leather or fur and paper.

Entries added to the Candidate List on 17 January 2023:

  • 1,1'-[ethane-1,2-diylbisoxy]bis[2,4,6-tribromobenzene]
  • 2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol
  • 4,4'-sulphonyldiphenol
  • Barium diboron tetraoxide
  • Bis(2-ethylhexyl) tetrabromophthalate covering any of the individual isomers and/or combinations thereof
  • Isobutyl 4-hydroxybenzoate
  • Melamine
  • Perfluoroheptanoic acid and its salts
  • reaction mass of 2,2,3,3,5,5,6,6-octafluoro-4-(1,1,1,2,3,3,3-heptafluoropropan-2-yl)morpholine and 2,2,3,3,5,5,6,6-octafluoro-4-(heptafluoropropyl)morpholine

Information on these substances' uses and reasons for inclusion on the Candidate List is available here.

 

More information:
ECHA chemicals hazardous
Source:

European Chemicals Agency

17.01.2023

EU agreement on deforestation-free supply chains

The viscose fibre manufacturer Kelheim Fibres - exclusively using FSC® or PEFCTM certified pulps exclusively from sustainably managed sources - welcomes the preliminary political agreement reached between the European Parliament and the Council on an EU regulation on deforestation-free supply chains. The new rules, adopted at the end of 2022, are intended to prevent goods that cause forest degradation or deforestation from being placed on the EU market.

As one of the largest economies worldwide, the EU is a major consumer of wood-based raw materials. Therefore, the new law can significantly contribute to reducing global deforestation and forest degradation as well as protecting threatened forest areas.

The viscose fibre manufacturer Kelheim Fibres - exclusively using FSC® or PEFCTM certified pulps exclusively from sustainably managed sources - welcomes the preliminary political agreement reached between the European Parliament and the Council on an EU regulation on deforestation-free supply chains. The new rules, adopted at the end of 2022, are intended to prevent goods that cause forest degradation or deforestation from being placed on the EU market.

As one of the largest economies worldwide, the EU is a major consumer of wood-based raw materials. Therefore, the new law can significantly contribute to reducing global deforestation and forest degradation as well as protecting threatened forest areas.

“Wood is an incredibly versatile and valuable renewable resource and the basis for countless products. Our viscose fibres are just one example – they offer an environmentally friendly alternative to synthetic materials in various applications and are thus a promising material for the future. Of course, this only applies if the production of our raw materials does not take place at the expense of our earth's natural forest resources. These forests are a bastion of biodiversity and climate protection for our entire planet and must be protected at all costs. No one can escape this responsibility," says Craig Barker, CEO at Kelheim Fibres.

Source:

Kelheim Fibres GmbH

13.01.2023

Source Fashion: New international fashion sourcing platform in UK

The international fashion sourcing platform Source Fashion, taking place from 12th – 14th February at Olympia London, has announced a compelling line-up of country pavilions and over 150 audited, quality manufacturers from around the world including Peru, India, China, Pakistan, Italy, Spain, Greece, North Macedonia,  the UAE, Madagascar, Jordan, Uzbekistan, Turkey, the UK and many more who will join the inaugural show, which runs parallel to Pure London.

Bringing a textile pavilion to the UK for the first time, the Peru Pavilion will showcase six manufacturers specialising in high-quality alpaca wool from the raw material right through to garment production, as well as cotton and other natural mixtures.

The international fashion sourcing platform Source Fashion, taking place from 12th – 14th February at Olympia London, has announced a compelling line-up of country pavilions and over 150 audited, quality manufacturers from around the world including Peru, India, China, Pakistan, Italy, Spain, Greece, North Macedonia,  the UAE, Madagascar, Jordan, Uzbekistan, Turkey, the UK and many more who will join the inaugural show, which runs parallel to Pure London.

Bringing a textile pavilion to the UK for the first time, the Peru Pavilion will showcase six manufacturers specialising in high-quality alpaca wool from the raw material right through to garment production, as well as cotton and other natural mixtures.

The main Indian Pavilion at this year’s Source Fashion, in collaboration with the Wool and Woollens Export Promotion Council, will showcase 20 established garment and textile exporters specialising in wool, woollen and acrylic fibres. The exhibitors will be showing full garments including men’s, women’s and kidswear as well as a selection of fabrics and raw materials. These exhibitors are regular export partners to the UK retail industry and already work with some big retailers in white label production.

The China Pavilion will present a selection of high-quality Chinese manufacturers ranging from full garment manufacturing through to raw materials, fabrics, cashmere and components.

Other producers and manufacturers attending Source Fashion from across Europe and the UK include:

  • Mivania - an Italian knitwear manufacturer producing garments in 100% cashmere and cashmere blends.
  • SATCoL (Salvation Army Trading Company) - a charity-owned textiles collector in the UK, actively working with retailers to reduce their carbon footprints.
  • Kusilas - a Spanish company monitoring all the stages of the production process.
  • Prime Casual - based in Leicester, UK, they specialise in the design and manufacture of ladies clothing from fast fashion, wholesale to bespoke tailoring.
  • Athos Pallas - a fashion and textile agency located in Thessaloniki, Greece.

 

Source:

Source Fashion by Hyve / Good Results PR

09.01.2023

Autoneum takes over automotive business of Borgers Group

January, 6 Autoneum signed an agreement to acquire the automotive business of Borgers. The transaction is expected to close in April 2023 following antitrust clearance. The enterprise value paid amounts to EUR 117 million.

Borgers specializes in textile acoustics protection, insulation and trim for automobiles. The product and customer range of Borgers is to a great extent complementary to the product and customer portfolio of Autoneum. Borgers’ wheel arch liner and trunk liner product lines as well as their truck business optimally complement the product range of Autoneum. Especially in the field of textile wheel arch liners, Borgers is the market leader in Europe. In addition, Borgers’ product range is distinguished by sustainable and fully recyclable products. In fiscal year 2021, the Borgers Automo-tive Group generated revenue of EUR 610 million with around 4 700 employees. Thanks to Autoneum’s global presence, the Borgers product portfolio adds to the sales potential for profitable growth in the medium term outside Europe.

January, 6 Autoneum signed an agreement to acquire the automotive business of Borgers. The transaction is expected to close in April 2023 following antitrust clearance. The enterprise value paid amounts to EUR 117 million.

Borgers specializes in textile acoustics protection, insulation and trim for automobiles. The product and customer range of Borgers is to a great extent complementary to the product and customer portfolio of Autoneum. Borgers’ wheel arch liner and trunk liner product lines as well as their truck business optimally complement the product range of Autoneum. Especially in the field of textile wheel arch liners, Borgers is the market leader in Europe. In addition, Borgers’ product range is distinguished by sustainable and fully recyclable products. In fiscal year 2021, the Borgers Automo-tive Group generated revenue of EUR 610 million with around 4 700 employees. Thanks to Autoneum’s global presence, the Borgers product portfolio adds to the sales potential for profitable growth in the medium term outside Europe.

Autoneum is acquiring Borgers from insolvency and has agreed new pricing and delivery terms with its customers. These will ensure sustained profitability and the further development of product and process technologies in both the short and long term.

The transaction will initially be financed through a new credit facility which is available in addition to the syndicated loan of CHF 350 million renewed in October 2022. A capital increase in the amount of approximately CHF 100 million is planned for the long-term refinancing of the acquisition. Autoneum’s two largest shareholders, Artemis Beteiligungen I AG and PCS Holding AG, have agreed to participate in the capital increase in proportion to their current shareholdings. Even taking into account the aforementioned capital increase, the transaction will generate a positive earn-ings per share contribution from the outset.

Source:

Autoneum Management AG

(c) International Textile Manufacturers Federation (ITMF)
04.01.2023

17th ITMF Global Textile Industry Survey

  • Business situation has worsened markedly but not expectations.

The 17th ITMF Global Textile Industry Survey (GTIS, formerly known as ITMF Corona-Survey) shows that on average the business situation in the global textile industry has deteriorated further in November 2022. At the same time, global business expectations in six months’ time remained in negative territory but did not get gloomier. The indicators for order intake, order backlog, and capacity utilisation rate dropped, globally.

  • Business situation has worsened markedly but not expectations.

The 17th ITMF Global Textile Industry Survey (GTIS, formerly known as ITMF Corona-Survey) shows that on average the business situation in the global textile industry has deteriorated further in November 2022. At the same time, global business expectations in six months’ time remained in negative territory but did not get gloomier. The indicators for order intake, order backlog, and capacity utilisation rate dropped, globally.

According to the survey, the business situation in the three Asian regions and Europe remained especially poor. In North & Central America the business situation has improved again markedly. Except for the textile machinery segment that still benefits on average from a long order backlog, all other segments found themselves in negative business situations, especially fibre producers and spinners. Global business expectations have remained negative but “stabilized” around -10 percentage points (pp) since July 2022. Expectations have improved significantly in South Asia to +10pp, and Europe to -30pp. Business expectations in all segments remain negative territory with four out of seven recording improvements.

Order intake nose-dived in November, in line with weaker business situation and weaker demand, currently the biggest concern for the global textile value chain. Only companies in North & Central America registered on average a good order intake, while all other regions were faced with an unsatisfactory order situation. Except for South-East Asia and North & Central America order backlog fell. The only segments where order backlog increased were the down-stream segments garments and home textiles. Capacity utilization rate dropped in all regions in November 2022. It only increased in the textile machinery segment but fell otherwise.

“Weakening demand” is by far the biggest concern in the global textile industry, followed by the root causes of demand reduction, namely high energy and raw material prices which lead to high inflation rates. Good news is that logistical costs are not much of a concern anymore. Concerns about geopolitics on the other hand have increased again in the past two months.

More information:
ITMF market survey
Source:

International Textile Manufacturers Federation (ITMF)

(c) TMAS
30.12.2022

Climate impact mapping of Swedish textile machinery

Over the past year, TMAS, the Swedish Textile Machinery Association, has been working with ClimatePartner on a corporate carbon footprint (CCF) mapping project with its member companies, as a natural step towards supporting a more sustainable textile industry.

Over half of the members of TMAS are participating in the project, which involves calculating each operation’s Scope 1, 2 and 3 emissions in order to identify the current climate impact and areas where reductions can be made.

“Integrating climate action into strategies is becoming increasingly important in Europe and we have decided to take a pro-active role,” says TMAS secretary general Therese Premler-Andersson. “There is growing pressure from customers to be more transparant in this area and forthcoming legislation will soon make it necessary for all to take climate actions. TMAS members, however, recognise the benefit of taking action now, not least in terms of taking responsibility and demonstrating credibility.”

The CCF project’s scope examines all aspects of a business split into five areas:

Over the past year, TMAS, the Swedish Textile Machinery Association, has been working with ClimatePartner on a corporate carbon footprint (CCF) mapping project with its member companies, as a natural step towards supporting a more sustainable textile industry.

Over half of the members of TMAS are participating in the project, which involves calculating each operation’s Scope 1, 2 and 3 emissions in order to identify the current climate impact and areas where reductions can be made.

“Integrating climate action into strategies is becoming increasingly important in Europe and we have decided to take a pro-active role,” says TMAS secretary general Therese Premler-Andersson. “There is growing pressure from customers to be more transparant in this area and forthcoming legislation will soon make it necessary for all to take climate actions. TMAS members, however, recognise the benefit of taking action now, not least in terms of taking responsibility and demonstrating credibility.”

The CCF project’s scope examines all aspects of a business split into five areas:

  • Facility Management (heating, electricity, water, cooling agents and waste disposal).
  • Employee Mobility (commuting and company cars).
  • Business Travel (flights travel by train, rental cars).
  • Procurement (production, packaging and office materials).
  • Logistics (inbound and outbound).

Primary data is being used wherever possible and emission factors originate from internationally recognised databases such as ecoinvent and GEMIS.

The ClimatePartner measurement programme is based on the guidelines of the Greenhouse Gas Protocol Corporate Accounting and Reporting Standard (GHG Protocol), and factors in all greenhouse gases covered by the Kyoto Protocol. These are carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), hydrofluorocarbons (HFC), perfluorocarbons (PFC), sulphur hexafluoride (SF6) and nitrogen trifluoride (NF3).

Each of these gases affect the atmosphere differently and remain in the atmosphere for different lengths of time. Rather than reporting on each gas separately, they are expressed as a CO2 equivalent (CO2e) for the sake of simplicity. A CO2e is essentially a conversion into a ‘global warming potential’ value that enables the influence of different gases on global warming to be compared.