From the Sector

DyStar, a specialty chemical company, announces its latest innovation, Eco-Advanced Indigo Dyeing.

The launch of DyStar’s Eco-Advanced Indigo Dyeing aims to reduce water usage by up to 90% and energy consumption by up to 30% during the production process. The new DyStar’s Eco-Advanced Indigo Dyeing is applicable in the Indigo traditional dyeing process, for Sulphur dyes, and colored Denim. The technique of sustainable indigo dyeing has already been proven to reduce substantially the effluent load in Denim production.

DyStar’s eco-friendly indigo dyeing process is recognized for helping customers deliver better consistency in quality while achieving less wastewater treatment in the effluent.

B.I.G. Yarns unveils its new “SustainableYarns” platform, with Clerkenwell Design Week visitors the first to be invited to get on board and focus on what matters most for the design and manufacture of sustainable soft floorings.

The expert in polyamide (PA) 1 step 3 ply yarns offers a range of options for manufacturers to introduce sustainable yarns into carpet solutions and reach sustainability targets faster and more efficiently.

The Sustainable Yarns range creates opportunities to design with recycled content yarn (EqoCycle), to work with renewable resources (EqoBalance), and, following the launch of new polyamide 6 (PA6) EqoYarn at Clerkenwell Design Week, to also leverage the low-impact value chain.

New addition EqoYarn is a new low-impact PA6 carpet yarn based on the most recent innovations in polymer production, which enable yarn manufacturers to lower their carbon footprint by nearly 50% and give carpet manufacturers more options to reduce their impact.

For its EqoYarn Bulk Continuous Filament (BCF) production process, B.I.G. Yarns has selected the few best-in-class partners that have made major steps forward in terms of sustainability, and reduced their greenhouse gas emissions thanks to continuous investments in process efficiency, green energy, heat optimization and waste reduction. The result is EqoYarn with a carbon footprint of 4 kg CO2 eq/kg yarns, which is a CO2 reduction of up to 50% compared to conventional PA yarns.

EqoBalance PA6 yarns enable customers to reach an even higher CO2 reduction of up to 75%. Manufactured with polymers made from renewable resources such as organic waste from cooking oil instead of virgin or fossil feedstock, these yarns have a carbon footprint of 1.98 kg CO2 eq./ kg yarns. They help carpet manufacturers to create products with an extremely low carbon footprint.

EqoCycle PA6 yarns are fully recyclable and incorporate 75% recycled content originating from recycled and regenerated PA6 granules. With a carbon footprint of 4.64 kg CO2 eq./ kg yarns, they deliver the same high-quality performance of virgin PA6 yarn with the benefit of 37% CO2 reduction. EqoCycle yarns offer carpet manufacturers a sustainable alternative to help reduce the ecological footprint of their products and move towards a circular economy without jeopardizing the end-product quality.

In addition to the different CO2-reducing options, B.I.G. Yarns’ customers can access an unlimited colour range to elevate their designs. Its BCF technology for polyamide yarns, twisted and heat-set yarns, one-colour to multi-colour, between 650 and 15000 dTex, along with its colour studio, are available to support their creation of customised collections.

Carbios has been selected among the 22,000 start-ups in the French Tech ecosystem to represent French innovation at the 6th “Choose France” Summit.  “Choose France” is an international business summit dedicated to the attractiveness of France launched at the initiative of Emmanuel Macron, the President of the Republic. Only ten companies, including Carbios, have been chosen to exhibit their technologies at the Château de Versailles.  On this occasion, Carbios announces that it has joined the Coq Vert community launched by Bpifrance in partnership with ADEME^[1] and the Ministry of Ecological Transition, to connect with other environmentally committed business leaders and advance its international deployment.

“With INRAE^[2], we chose to highlight Carbios at the Choose France summit as a symbol of French economic dynamism,” comments Philippe Gassmann, Secretary General Choose France 2023 (French Treasury). ” With its innovative “Made in France” biotechnologies that bring plastic into the circular economy, Carbios illustrates the wealth of  innovation within the French cleantech ecosystem.  I thank Carbios for its ambassadorship for this ecosystem to the 200 foreign guests attending the 6th Choose France Summit with the theme: Investing for a sustainable future.”

“Carbios is honored to have been selected by the Elysée Palace for Choose France.  This international summit provides an opportunity for meetings between the President of the Republic, members of the Government and the leaders of major foreign and French companies to discuss France’s economic ambitions and attractiveness,” commented Emmanuel Ladent, Chief Executive Officer of Carbios. “Carbios is in the midst of a major industrial rollout, with a first plant planned in the Grand Est region, and the international commercial deployment of our processes.  We are very grateful for the French Government’s support at this strategic time for the company.”
(Emmanuel Ladent, CEO, and Alain Marty, Chief Scientific Officer, representing Carbios at Choose France)

The Coq Vert community
Launched by Bpifrance, in partnership with ADEME and the Ministry of Ecological Transition, this community brings together 2,000 members who are players in sustainable development and are convinced of the need to act for energy and ecological transition.

^[1] ADEME = The French Agency for Ecological Transition
^[2] INRAE = France’s National Research Institute for Agriculture, Food and Environment

Klaus Steger (64), CEO of ERWO Holding AG (“ERWO Holding”) and Hoftex Group AG (“Hoftex Group”), will step down from the Management Board of both companies at the beginning of 2024 in accordance with internal policies of the family and the company regarding the retirement age. Already on June 30, 2023, ERWO Holding Management Board member Hans-Georg von Schuh will retire as planned. ERWO Holding Management Board member Manfred Heinrich will also leave the Board as planned at this time and will continue to hold his mandate as one of the managing directors in the Südwolle Group together with Stéphane Thouvay and Johannes Rauch.

Steger’s designated successor as CEO of both companies is Manuela Spörl (50), currently CFO of ERWO Holding and also CFO of Hoftex Group. Hoftex Group is a group of medium-sized companies in the textile industry, in which ERWO Holding holds a significant stake. In addition, ERWO Holding acts as the parent company of the Südwolle Group, in which the Group’s worsted yarn activities are bundled.

Spörl has a degree in business administration and has been working for Hoftex Group since 2000. Her professional career began in the Corporate Controlling department, and in 2012 she was appointed as an advisor to the Board of Management. She was granted power of attorney in 2015, followed by appointments as CFO of the Hoftex Group in 2020 and CFO of the ERWO Group in 2022. A search for a successor for Spörl in the position of CFO of the Hoftex Group and, subsequently, of ERWO Holding is currently underway. Until the new CFO takes office, the two members of the Management Board, together with the Supervisory Board, will ensure an orderly transition.

The announced change in the Management Board of ERWO Holding, which acts as the parent company of the Südwolle Group, also ensures continuity at the leading manufacturer of worsted yarns for weaving, circular and flat knitting products in pure wool and wool blends. In the future, the management of Südwolle Group will continue to consist of the longstanding members Manfred Heinrich (Technology, Production & Planning), Johannes Rauch (Finance & Controlling) and Stéphane Thouvay (Sales & Marketing and Product Management & Innovation). Together with the designated board member of the parent company ERWO Holding, they will continue the successful development of the Südwolle Group from a mere supplier to a strategic partner of its customers as well as the growth trend of recent years.

The founding family Steger remains involved in the various supervisory bodies of the group of companies and will continue to work closely with them as the sole shareholder of ERWO Holding.

Performance sportswear brand FIRE+ICE by BOGNER announces an exclusive collaboration with the multi-sport athlete, Ester Ledecka. This 28-year-old made history during the 2018 Pyeongchang Winter Games as the first athlete to win Olympic gold medals in two distinct sports in the same year. Ester has followed her career with winning 24 World Cup races in skiing and snowboarding combined and defending her Olympic gold in snowboarding in 2022.

Ester's athletic spirit runs in the family, with her grandfather being an ice hockey world champion and Olympian. The Czech-born athlete took up skiing at the age of two and added snowboarding to her repertoire just three years later. On top of her performance on snow, she embraces her passion for windsurfing during the summer months.

Her personality and drive for success perfectly align with FIRE+ICE's commitment to outstanding performance, innovation, and adventure. This stylish collaboration blends high-performance Olympic sport with trendy urban performance wear.

"FIRE+ICE by BOGNER is my go-to outfitter for every occasion. In winter, I'm well protected from wind, cold and wet, and in warmer seasons, I'm fashionably and functionally geared up for surfing. The brand ideally reflects my lifestyle, and I'm excited about the upcoming joint projects", says Ester.

• Carbios has developed an ultra-high throughput microfluidic screening of PET-depolymerizing enzymes in partnership with the Paul Pascal Research Center^[1], a joint research unit of the CNRS^[2] and the University of Bordeaux
• Microfluidics enables millions of enzymes to be screened in a day, compared with a few thousand a week with conventional technologies
• Future polymers of interest will benefit from this acceleration of the R&D phase, enabling Carbios to develop its portfolio of innovations on different types of plastic more rapidly

Carbios has accelerated its enzyme screening process with a microfluidic technology developed in partnership with the Paul Pascal Research Centre (a joint research unit of the CNRS and the University of Bordeaux, which specializes in microfluidics). This technology enables the screening of millions of enzymes in just one day, speeding up the process to optimize enzymes breaking down PET. This competitive advantage enables Carbios to reduce the time between the R&D phase and the production of its proprietary enzymes, and therefore to develop concrete solutions to plastic pollution even faster.

Microfluidics
Microfluidics allows the production of devices handling very small amounts of liquid. Each droplet generated can be considered as an independent microreactor having a volume in the picoliter range (10-12 liters) and containing a particular enzyme whose PET depolymerization activity will be screened. These droplets move through analysis units the size of a microchip allowing ultra-high throughput screening of 150 enzymes per second.

Previously, conventional robotic systems allowed screening in microplate format with a volume in the milliliter range (10-3 liters) and with rates of around one enzyme per minute.

The use of microfluidics to screen for more efficient or new enzymes will become widely adopted in the coming years, therefore accelerating the development of bioprocessing. Currently used by Carbios for the development of its PET depolymerization process, microfluidics should be used to accelerate the development of new enzymes for other types of plastic such as polyamide.

Carbios researchers specialized in microfluidics
Microfluidic processes require special expertise. At present, two researchers at Carbios are dedicated to microfluidics and based in the cooperative laboratory with TBI^[3] hosted by INSA^[4] Toulouse.  Alexandra Tauzin, Researcher in Enzyme Engineering and Microfluidics, and Alexandre Gilles, Engineer specialized in robotics, work in partnership with the Paul Pascal Research Center.

^[1] Centre de Recherche Paul Pascal (CRPP)
^[2] Centre National de la Recherche Scientifique (CNRS) = National Center for Scientific Research
^[3] Toulouse Biotechnology Institute
^[4] National Institute of Applied Sciences

"ITA Aachen and ITA Augsburg are part of the ITA Group International Centre for Sustainable Textiles. Experience our textile innovations at two exhibition booths," explains ITA Institute Director Professor Dr. Thomas Gries. "See our ring spinning tester at booth H3-B304, which spins recycled fibres sustainably and individually in a previously impossible fineness. In addition, there is digital yarn monitoring, which enables new market potentials. Get an idea of the Recycling Atelier of ITA Augsburg at booth H3-A207 and see the textile cycle from used textile to solution steps for industrial implementation together with industry partners. Join us on the Walk4Recycling and follow the path from used textile to a new knitted pullover on a tour of the trade fair. This is how we live up to our claim as the ITA Group: sustainable - digital - individual."

ITA Aachen - Digital ring spinning tester for recycled fibres enables spinning of fine yarns with high recycled fibres content
The Institut für Textiltechnik of RWTH Aachen University (ITA) will be exhibiting a digital ring spinning tester, which spins recycled fibres directly and conventionally with a particularly high content of 60-70 percent. Up to now, recycled yarns have mainly been rotor-spun in this blend ratio. This results in rather coarse yarns and is not suitable for finer textiles such as outerwear. Ring spinning of recycled yarns now enables the spinning of finer yarns and thus a higher application level for recycled materials.

A unique selling point of the ITA ring spinning tester is the simultaneous spinning in the direct spinning process from the sliver and in the classic ring spinning process. For this purpose, the strength and elongation of the spun yarn are determined online and digitally for the first time. The real-time measurement allows process parameters and yarn properties to be adjusted iteratively and quickly. The ring spinning tester was upgraded from an existing tester to Industry 4.0 standard and is operated via a tablet. Operation via tablet enables the adjustment of process parameters including online quality monitoring remotely from anywhere in the world.
 
For this purpose, the ring spinning tester is also able to produce fine ring spun yarns. These yarns made from recycled material opens up a multitude of further fields of application for woven and knitted goods. Now, for example, clothing and technical textiles can be made from recycled material, the production of which was not possible before - such as outerwear made from recycled material. The development of new industries and fields of application opens up new market potential for recycled yarns - also and especially for processing in Europe. This creates the opportunity to preserve key technologies and jobs in cost-intensive locations.

ITA Augsburg - Recycling Atelier: Walk4Recycling
The Recycling Atelier of the Institut für Textiltechnik Augsburg gGmbH on stand H3-A207 presents the textile recycling from used textiles into new products via the various process steps and, together with the industrial partners, opens up solution paths for industrial implementation.

Under the headline "Walk4Recycling", a tour of the fair shows the cycle of used textiles from used knitwear into a new knitted pullover via a ring yarn made from a blend of 65 percent recycled cotton and 35 percent virgin polyester. The key innovation here is the high proportion of recycled fibres from post-consumer textiles for a ring yarn of this fineness. Today, mainly coarse rotor yarns for low-quality textiles are spun from these materials. The industrial partners participating in the Walk4Recycling are partners of the Recycling Atelier and contribute with their technologies to the fact that fibre material from old clothes can be processed in various process stages into a yarn of new value and high-quality ready-made garments.

The Walk4Recycling offers visitors the opportunity to experience a complete recycling cycle with the numerous process stages from tearing the old textiles, preparing and spinning the fibres and knitting a new jumper live during the fair. Get detailed information on the mechanical recycling of clothing via QR code, website and flyer about the participating exhibitors and their machines and technologies. A short movie will give you additional insights into the various processes involved in the production of the jumper.

Fibre Extrusion Technology Ltd (FET) of Leeds, UK will be exhibiting at ITMA 2023, taking place between 8-14 June Milan, Italy. FET has commissioned its biggest ever stand to reflect the company’s commitment to this event and the textile industry.

FET designs, develops and manufactures extrusion equipment for a wide range of high value textile material applications worldwide. Central to FET’s success has always been its ability to provide customers with advanced facilities and equipment, together with unrivalled knowledge and expertise in research and production techniques.

The new FET Fibre Development Centre will further improve this service, allowing clients to trial their own products in an ideal environment. Resident equipment in the Fibre Development Centre reflects the wide range of fibre extrusion systems offered by FET to clients worldwide and will enable continued growth of the company through innovation.  

For the first time at ITMA, the new FET Spunbond range will feature. This system provides opportunities for the scaled development of new nonwoven fabrics based on a wide range of fibres and polymers, including bicomponents. Recent customers to benefit from FET spunbond systems include the University of Leeds and an integrated metlblown / spunbond system at the University of Erlangen-Nuremberg in Germany.

FET’s established expertise remains in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. FET has successfully processed almost 30 different polymer types in multifilament, monofilament and non-woven formats, collaborating with specialist companies worldwide to promote greater sustainability through innovative manufacturing processes. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

A major theme at ITMA will again be sustainability. The FET range of laboratory and pilot extrusion lines is ideally suited for both process and end product development of sustainable materials. “This year we are celebrating FET’s 25th anniversary” says FET Managing Director Richard Slack “and we look forward to meeting customers at ITMA, where we can discuss their fibre technology needs.”

The international association that will manage the Single-Entry-Point (SEP) of the BIONANOPOLYS project has been formally constituted and will be able to support companies across the European Union in the market introduction of bionanomaterials through technical, legal, regulatory, safety, economic and financial support services.

The SEP was established as an AISBL (non-profit entity) on 17 February 2023 in the framework of the European project BIONANOPOLYS, funded by the Horizon 2020 programme. The technical director of ITENE and coordinator of this project, Carmen Sánchez, is the president of this association in which representatives of other project partners also act as directors. Specifically, the CTP (Centre Technique du Papier) from France; CIDAUT (Fundación para la Investigación y Desarrollo en Transporte y Energía), from Spain; CENTI (Centre for Nanotechnology and Smart Materials), from Portugal, and the law firm Gil & Robles - San Bartolome & Associés, from Luxembourg.

The BIONANOPOLYS SEP will reduce the risks and barriers to the commercial exploitation of bio-based materials and polymeric bionanocomposites with nanotechnology and accelerate market penetration and innovation processes. SMEs, large companies, and potential customers who are users of the BIONANOPOLYS OITB (Open Innovation Test Bed) will be able to access the services offered by the project partners through this entity, which will act as a one-stop shop, at affordable costs and conditions.

The test bed consists of 14 enhanced pilot plants and complementary services to support technological and commercial breakthroughs. Collaboration between all the partners that make up BIONANOPOLYS and access through the SEP allows joint access to all the services offered by the partners and helps to drive collaborative open innovation.

Call for access to the BIONANOPOLYS OITB
The SEP and the project partners will be in charge of evaluating the projects submitted to the BIONANOPOLYS platform once the open call launched last February to select five projects from different European countries that will be able to access its services free of charge to develop, test or scale-up bionanomaterials in the BIONANOPOLYS OITB closes.

Companies wishing to access the services to develop or test nanomaterials can submit their applications until 30 April.

The BIONANOPOLYS test bed could benefit companies involved in the production of biopolymers, cellulose paper, nonwovens, foams, or coatings, as well as the packaging, agriculture, food, cosmetics, pharmaceuticals, hygiene, textiles and 3D printing sectors.

The international nonwovens community came together once again in Geneva this week for INDEX™23, with with 12,017 attendees from over 100 countries and 610 exhibitors from 43 countries joining the event.

Exhibitors made the most of the four intensive days to meet potential new customers and extend business with existing clients. As one of the world’s leading nonwovens exhibitions, INDEX™ demonstrated the latest breakthroughs and innovative developments across all nonwovens’ applications.

The INDEX™ Lab, an exchange hub displaying samples from innovations and new developments, also showcased the winners and runners up from each of the five categories of the INDEX™ Innovation Award. Open to any EDANA member company or exhibitor at INDEX™23, the winners were announced on the first day of the exhibition during a dedicated ceremony at the EDANA stand.

The winners (more infomation):

1. Nonwoven roll goods
   Winner: Suominen – HYDRASPUN® Circula Nonwoven
2. Finished products made from, or incorporating nonwovens
   Winner: Henkel – Smart Adult Care
3. Raw materials or components (e.g., fibre, binder, polymer, tape), of special relevance to the nonwovens industry and related converted products
   Winner: Fiberpartner – BicoBio
4. Innovation in machinery of special relevance to the nonwovens industry
   Winner: Curt G. Joa, Inc. – ESC-8™
5. Sustainable Product
   Winner: Sparkle Innovations – SugaFluff™

The "Nonwovens Journey", an immersive experience that takes a look at the innovative role of nonwovens, as well as how innovation has progressed in time around both sustainability, and how nonwovens are used in everyday life, also allowed visitors to discover the versatility of nonwovens.

Running alongside the exhibition itself, there was also a full programme of side events that were enjoyed by participants: Exhibitor Product Presentations from 33 exhibitors; a series of informative seminars covering a myriad of topics including medical nonwovens, sustainability, circular economy, geosynthetics, textiles, mobility, fair trade, gender equity, innovation, and market trends; country-specific briefings offering insights into the nonwovens market in various regions around the world; and a nonwovens tutorial intended as an induction to nonwovens for those new to the industry. These topics were all presented by leading industry experts and guest speakers, including among others, the World Trade Organization (WTO).

Concern for the environment has in recent years become increasingly important, and once again remained a key topic at INDEX™23, with companies pushing to achieve further CO₂ reductions and circularity across the supply chain.

Continuing on from its success during COVID-19, the INDEX™23 Mobile App and Virtual Platform was back. This tool offered participants – both in Geneva and those following from home – the chance to watch presentations live and interact with speakers, exhibitors, and other participants. Attendees were able to plan their visit and organize meetings, which was highly appreciated. Video recordings from the sessions will remain available online in the app and platform for the coming weeks.

The next INDEX™ will take place in three years from 21-24 April 2026.