From the Sector

AMUT’s strategic partnership with EREMA contributes to accelerate the transition towards a greener world.  In summer 2021, EREMA in collaboration with AMUT  has finalized the installation and commissioning of ALTO packaging ́s first extrusion line for food grade PET sheets in New Zealand market. At the ALTO Plastic Packaging site, in Albany, the plant now processes 100 % washed post-
consumer flakes into 100 % food contact grade monolayer thermoforming sheet. In New Zealand, this milestone represents the first system to be installed for this special application.

The plastic packaging company ALTO, a division of PACT Group, invested for this new food grade PET sheet extrusion line as a part of Pact Group ́s vision to lead Circular Economy through Packaging in Australia and New Zealand.

Thanks to the direct combination of VACUREMA® PET recycling technology and the AMUT Inline Sheet production technology there is no longer any extra process stage. This is, because the melt goes straight from the VACUREMA® 1716 T Basic to the AMUT plant without the detour of pelletising. The post-consumer PET material is already decontaminated and pre-dried prior to extrusion in the vacuum reactor of the VACUREMA® Basic, with a throughput of up to 1,500 kg per hour. After high capacity filtration by EREMA SW-RTF backflush filter and online IV measurement, the melt goes directly into the AMUT Inline Sheet plant where it is processed into thermoforming sheet from 0.15 mm till 1.2 mm thickness. The monolayer thermoforming sheet produced from pure rPET is not only 100 % food contact compliant, it also fulfils the FDA and further regulations. At ALTO it is further processed into trays and food containers.

AMUT played its part by providing a full range of downstream equipment ranging from the Automatic Tdie, three rolls stack calender with automatic gap control and motorized cross axing unit, lamination unit for welding and barrier films, thickness control gauge to anti-static silicon coating unit, fully automatic two shafts turret winder and in line edge trims grinding and recycling.

The special features of this extrusion line come from the complete automatic and easy management of the line. This is due to the new Amut`s software including the Easy Start and Easy Change functions that will allow the operator to start the extrusion line and change product formats in automatic mode.

EREMA and AMUT are long-term partners in the Inline Sheet sector. EREMA ́s VACUREMA® technology is currently in use in more than 100 Inline Sheet facilities around the world, also for PACT Group companies in Australia. 

• Focus now on digital fair platform

The PERFORMANCE DAYS team regrets having to cancel at short notice the physical edition of PERFORMANCE DAYS which was scheduled to take place on December 1-2, 2021 at the Messe München exhibition center. Right up until today, the event organizers of PERFORMANCE DAYS were in the final stages of preparations for the fair. The goal of being able to realize a fully booked fair with a portfolio like in pre-pandemic times seemed to be within reach. The political regulations agreed in Bavaria from November 19, 2021 and the heavily restricted constraints associated with an incidence of 1000 have far-reaching consequences for PERFORMANCE DAYS. As a result of the current sharp rise in the number of infections in Munich, the planned winter edition must now be cancelled as a precaution. The focus now is now completely on the digital fair on December 1 and 2, 2021.

The new measures are scheduled to come into effect in Munich from the middle of this week, which would lead to very short-term changes. The organizers of PERFORMANCE DAYS therefore see themselves in the responsibility to enable a minimum of planning security as well as a responsible handling of the given situation with this decision.

“Exceptional situations require exceptional decisions – making these all the more difficult. After experiencing a very successful and surprisingly well-attended fair with the Functional Fabric Fair by PERFORMANCE DAYS in Portland, Oregon last week, we have tried everything possible up to the last moment and firmly believed that we would finally set a further positive milestone with the physical edition of PERFORMANCE DAYS in Munich. We fulfilled all the requirements, updated our hygiene concept several times to comply with the dynamically changing measures and took all the necessary precautions for a safe event. Unfortunately, current developments do not allow us to host the trade fair event next week, since the undisputed top priority is the protection and health of our visitors. Now our focus turns to the full implementation of the Digital Fair on December 1 and 2, 2021”, explains Marco Weichert, CEO of PERFORMANCE DAYS

Focus on digital platform
The PERFORMANCE DAYS team is now investing all its efforts into implementing the Digital Fair on December 1 and 2, 2021. As part of THE LOOP, those interested have the opportunity as of now to view online the fabric innovations and news for the Winter Season 2023/24, this year’s Focus Topic “Sustainable Nylon” and the latest color trends. In the Marketplace, visitors will be able to view the numerous exhibitor products, including the PERFORMANCE FORUM’s curated sustainable fabric highlights. In order to present the fabrics to visitors as realistically as possible in terms of feel, design and structure in digital form, the PERFORMANCE FORUM has been equipped with new 3D-technology, including innovative tools such as 3D images, video animations and downloadable U3M files. Throughout the Digital Fair, exhibitors and fair visitors can look forward to extensive networking opportunities. For example, as part of the extensive digital supporting program on December 1, with various expert talks, discussion rounds and speakers via livestream, moderated by Charles Ross live from the studio. On December 2, the “sustain & innovate” conference on this year’s Focus Topic “The Sustainable Future of Nylon” will kick off with discussions and panels, moderated by Astrid Schlüchter, Editor-in-Chief of SAZsport and SPORTSFASHION by saz.  

A very special thank you goes out to the entire PERFORMANCE DAYS community with its exhibitors, visitors and partners for their active support, trust, loyalty and understanding in these still extraordinary times. The team looks forward to the Digital Fair on December 1 and 2, 2021 and further ahead to meeting you all personally on April 27 and 28, 2022 at the summer edition of PERFORMANCE DAYS live in Munich.

• GRAFE optimises properties of numerous high-performance and technical materials

Highly effective additive masterbatches with low dosage to improve the properties in engineering materials are recommended by GRAFE, Blankenhain, as an alternative instead of specially modified high-performance plastics. GRAFE has a wide range of additives for high-performance and technical materials, including PPA, PSU, PA6, PA6.6, PA GF, PET, PBT and POM.

"The use of our additive batch enables a more stable processing window of e.g. PPA, the melt flow is improved, the components cool down more evenly and easier mould filling is generated in injection moulding applications," explains Danny Ludwig, Head of Product Management Color & Functional Masterbatches.

According to him, a PPA material, for example, can be processed at lower temperatures and with reduced injection pressure on the injection moulding machine. "Overall, the friction forces are lower, which means that burns or damage to critical geometries can be avoided and more complex elements can be realised," says Ludwig. The surface quality of the components is also improved and demoulding is made easier. "Overall, a significant reduction in cycle time can be achieved," reports the expert.

• Sales increase 8.8% to €743.5 million compared to the same period of the previous year
• EBITDApre improves by 59.1% to €108.5 million
• Despite burdens from higher raw material and energy prices, stable revenue and earnings expected for Q4 2021

Following consolidated sales of €241.5 million in Q1 2021 and €255.2 million in Q2 2021, Q3 2021 confirms SGL Carbon's encouraging sales performance with €246.8 million. Due to increasing demand from almost all market segments, Group sales increased to a total of €743.5 million in the first nine months of the fiscal year (9M 2020: €683.5 million). This corresponds to an increase of 8.8% compared to the same period of the previous year.

Almost all business units contributed to the positive sales development. As largest business unit with a 44.7% share of Group sales, Graphite Solutions (GS) contributed €332.7 million to Group sales in the first nine months of 2021 (9M 2020: €308.0 million). The sales increase of 8.0% is based in particular on the positive development of the important market segments Semiconductor & LED as well as Automotive & Transportation. The business units Carbon Fibers and Composite Solutions contributed €244.7 million (9M 2020: €223.4 million) and €92.1 million (9M 2020: €60.7 million), respectively, to Group sales and benefited primarily from increased demand from the automotive industry. Compared to the previous year, sales increased by 9.5% in Carbon Fibers and by 51.7% in Composite Solutions. Only the Process Technology business unit, with sales down 4.9% to €62.1 million, was not yet able to participate in the general economic upward trend.

See the attached document for more infomation.

For its 2021 Green Collection, the Italian luxury hosiery brand Sarah Borghi presents a broadened product offer in terms of colors and categories, meeting the needs of a stylish, yet sustainable consumer. By mixing fashion, quality, innovation and research, the tights and stockings powerhouse continues its development in the journey towards a conscious future.

The evolution of the Green Collection, the sustainable hosiery collection first launched in 2020, confirms the efforts of the brand in promoting a new generation of attractive fashion and design which actively encourages and supports a responsible change in culture and smart products offer.

Lately, a decisive step has been added to the brand’s history thanks to the publication of the Integrated Report by Gizeta Calze, Sarah Borghi’s top-notch producer and first Italian company in the hosiery sector to include sustainability throughout its business model. A commitment of responsibility and transparency on a path that has been carried on for years and that, today more than ever, becomes of the utmost importance, as stated by Luca Marzocchi, CEO of Gizeta Calze. The Integrated Report provides a complete view of the business strategy, operating model and governance, which combines financial information with sustainability insights, conceived as complementary to other strategies and, indeed, essential for increasing business value.

The collection
The collection presents a range of versatile, colorful products combined with extra-luxury comfort and designed for every type of woman: from seductive tights to everyday socks, together with knee- highs, up to athleisure with leggings.
 
The responsible collection features two new generation materials. One is Amni Soul Eco®, the world’s first biodegradable in anaerobic conditions polyamide 6.6 yarn that degrades in around 5 years* after disposing of in landfill, developed by SOLVAY and produced and distributed by FULGAR. The other is ROICA™ V550 by leading fiber manufacturer Asahi Kasei, a premium sustainable stretch yarn boasting the Gold Level Material Health Certificate by Cradle-to-Cradle Product Innovation Institute** as it has been evaluated for impact on human and environmental health. Moreover, it smartly breaks down without releasing harmful substances in the environment according to Hohenstein Environment Compatibility Certification. Key elements that makes ROICA™ V550 a precious choice when it comes to Circular Economy material approach.

Reifenhäuser Reicofil will exhibit at the world's leading nonwovens trade show INDEX in Geneva from October 19 to 22, 2021. Under the slogan "Living Nonwovens", the nonwoven line specialist will showcase solutions for the production of sustainable nonwovens for a wide range of applications.

Sustainable nonwoven production starts with the amount of material used - the less raw material needed, the better. The "Reicofil 5x" line series is specialized in this application and achieves fabric weights of 8 gsm (grams per square meter) or even less through efficient downgauging, even on 1000 m/min Composite lines containing 3 Spunbond beams.

In addition, Reicofil customers can reduce the use of fossil raw materials on request by processing biobased raw materials as an ecological alternative - for example for diapers. The topsheet material, made of bulky, soft, and industrially compostable high-loft nonwovens, meets maximum hygiene requirements at the same time.

For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste. This is how Reicofil shows ways to combine sustainability and high-performance nonwovens.

In the medical sector, the line manufacturer will also be exhibiting its leading solutions for high-barrier medical protective clothing. In addition, meltblown nonwovens for face masks - still in great demand in many regions due to Covid - provide reliable safety and are helping to combat the pandemic worldwide. Reicofil technology therefore guarantees maximum safety, with filtration efficiencies of up to 99% (N99 / FFP3 standard), minimum quality fluctuations, and extremely high line availability at the same time.

With the current RF5 machine generation, Reicofil also sets benchmarks in terms of quality, performance, availability, efficiency, and machine intelligence - for challenging applications in hygiene, medical, and industrial sectors.

European Textiles and Clothing (T&C) industry coming out of the Covid19-crisis, but facing new challenges ahead. This recovery may however be disrupted by the current supply chain and energy problems. Latest economic data on the European T&C industry confirm further recovery from the corona pandemic. The textile activity has now surpassed its pre-pandemic level from Q4 2019 (+3.6%); the clothing sector still remains 11.5% below, but continues to improve.

In quarter-on-quarter terms, the EU turnover showed signs of improvements across the sector. The textile turnover increased by +3.3% in Q2 2021, after slightly contracting in Q1 2021. Similarly, the business activity in the clothing sector expanded by +7% in Q2 2021, after increasing by +1% in the previous quarter.
 
In the 2nd quarter 2021, the EU-27 trade balance for T&C improved, resulting mostly from an increase of export sales across third markets and a drop of textile imports. T&C Extra-EU exports boomed by +49% as compared with the same quarter of the previous year. T&C Extra-EU imports went down by -26% as compared with the same quarter of the previous year, following a decrease of imports from some main supplier countries. EU imports from China and the UK collapsed due to a combination of Brexit and weaker demand in Europe.
 
During the second quarter of 2021, job creation was slowly stabilising in the textile industry (-0.2% q-o-q), while employment in the clothing sector continued to be affected by lower levels of production activity in industry during the first part of the year (-1.2%). When compared to its pre-pandemic level in Q4 2019, EU employment in Q2 2021 was still 4.4% down in textiles and 11.8% down in clothing.

However, this fragile recovery is hampered by higher shipping costs and prices’ increase in raw materials and energy. The cost of energy, in particular gas, has increased more than 3 times since the beginning of this year. Since the announcement of the EU’s “Fit for 55” package, we have seen CO2 prices rising above €60. This inevitably has an impact on the industry’s competitiveness, especially in a global context. The future recovery is also threatened by some factors limiting production, such as shortage of labour force and equipment, which are putting additional pressure on T&C industries.

Director General Dirk Vantyghem commented on these latest figures: “Our companies have shown great resilience during the pandemic, and their latest export performance is an encouraging sign of recovery. This recovery may however be disrupted by the current supply chain and energy problems. Once again, recent developments show that this transition towards more sustainable production can only work if organised in a global context, avoiding carbon leakage and with an effective level playing field. This must be considered in the upcoming EU Textiles Strategy.”

Archroma celebrates 8 years of leading the way to a sustainable world, with innovations and solutions aimed at creating added value sustainable for its partners, consumers and the planet.

Archroma came to life on 1st October 2013 from textile, paper and emulsions businesses acquired from Clariant by SK Capital Partners.
Building on decades of commitment to developing safer eco-friendlier chemistry, Archroma has become in the past 8 years a prominent name for more sustainable colors and performance, collaborating with leading brands such as Primark, G-Star, Patagonia, Esprit and more.

Archroma has introduced innovations, such as the EarthColors® made from non-edible plant waste from the food and herbal industry, Denisol® Pure, an indigo for aniline-free* denim, aniline being a category 2 carcinogen substance, and Smartrepel®, a PFC-free* water repellent solution. The company is also about to launch a new plant-based softener.

The company started to develop holistic solutions designed to bring innovation and performance, whilst reducing the impacts on water, energy and other natural resources. The savings generated by these 70+ system solutions are demonstrated by Archroma's proprietary ONE WAY Impact Calculator, a tool launched in 2012 and continuously upgraded to simulate and optimize the footprint of application processes.

Archroma also recently launched CASUAL X SMART, a sulfur dyeing system for trendy wash-down effects to make clothes that look smart at home and at work. The colors won't fade in the washing cycle, and the application process allows resource savings of up to 33% water, 21% energy and 35% chemical usage compared to a benchmark reactive & pigment garment dyeing.

With ONE WAY, a brand can calculate how much impact their current production and the Archroma Way collection will have on water, energy, chemical, raw material or CO2 footprint.

WEIDMANN GmbH in Süßen is known worldwide as a specialist for the finishing of fiber and down-proof articles and woven industrial fabrics. Customers particularly appreciate the company's reliability and flexibility with regard to their individu-al requirements, and consistently high quality of its products. The Swabian textile manufacturer finishes premium fabrics, mainly for the bedding industry, using the latest technology and in an environmentally conscious manner.

The complex production and finishing processes for high-quality fabrics require a reliable and efficient machine technology. With this in mind, WEIDMANN has always relied on the proven stenter technolo-gy from BRÜCKNER. For many decades, the German textile machinery manufacturer has been a world leader in the con-struction of production lines for the finishing of classical textiles, woven industrial  fabrics, nonwovens, glass fabrics and floor coverings. In addition to stenters, the company's production program also in-cludes coating lines, relaxation dryers, sanfor lines, continuous dyeing lines as well as ovens for the bonding of nonwovens and other special lines. All machines are produced 100% in-house in Germany.

Both companies continuously invest in new and innovative technology in order to be successful and competitive today and in the future. Only Recently, a completely newly developed BRÜCKNER stenter was installed in the ultra-modern plant at WEIDMANN. During the intensive project engineering phase it soon became clear which features are of special importance for their daily production requirements:

• uniform moisture distribution in the machine entry and during pick-up of the specialized   chemicals in the finishing padder before the thermoprocess
• weft-straight fabric flow with minimized residual distortion
• very good accessibility for maintenance and daily cleaning
• sensor technology and automation of setting parameters for energy optimization
• heat-recovery with hot water generation for the dye house
• the line must be fully Industry 4.0 capable

Korteks, one of the world’s biggest yarn producers based in Bursa, Turkey, has started the production of recycled polyester filament yarn in its production facility using a Starlinger recycling line.

With the new recycling facility, which comprises a total closed area of 17,000 m² and has a monthly production capacity of 600 tons, Korteks was able to reduce the production waste at its virgin PES yarn site to zero.

The Starlinger recoSTAR universal 165 H-VAC iV+, which is part of Korteks’ 10 million dollars investment in a new polymer recycling facility, took up operation in May 2021. It has a production capacity of 7,200 tons per year and currently processes clean in-house polyester fibers from production scrap together with washed post-consumer PET flakes at a ratio of 50/50. Korteks uses the polyester regranulate at a share of 100 % for its new polyester filament yarn line it is going to market under the name “TAÇ Reborn”. With this investment, the company has made an important step towards establishing a circular economy in the Turkish textile industry.

The Starlinger recycling line is the first of its kind in Turkey and is equipped with special components for filament yarn recycling. A RSC (Rapid Sleeve Changer) candle filter developed by Starlinger ensures finest melt filtration down to 15 μm. It has been specially designed for polyester recycling and reaches an output of 1000 kg/h. For continuous operation the filter elements are changed “on the fly” without interrupting production, which significantly limits melt loss.

The viscoSTAR SSP unit at the end of the recycling process guarantees consistent IV increase according to the first-in-first-out principle. This makes sure that the produced regranulate has the ideal properties required for filament yarn production. The technical configuration of the line does not only allow the processing of a polyester fiber/PET flake mix as input materials, but also 100 % polyester filament scrap or 100 % PET bottle flakes.

Korteks expects the recycling market in general to grow as there is increased acceptance for recycled products in the society, and predicts the need for recycling solutions also for other synthetic and natural fibers.