From the Sector

• Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity

ST. LOUIS - Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.
For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil  repellents, flame retardants and more.

These systems enable fabric producers to significantly reduce chemical and water consumption, while speeding up production times and eliminating production steps, including drying and bath changeovers when switching fabric colors. “Our customers are major manufacturers in fabric dying, finishing and remoistening, and we want to provide outstanding service and support—even in times like this,” said Rick Stanford, Business Development Leader at Baldwin and the commercial leader of the US installations. “Not only does our precision spray technology enhance productivity in their process, but there is also zero waste, which goes hand-in-hand with the increased sustainability focus in the textile industry.”

In North Carolina, two new TexCoat G4 precision spray systems are now in production with major international vertical manufacturers of outdoor living, performance fabrics and automotive fabrics. In Georgia, a major vertical manufacturer of workwear and protective fabrics installed a sanfor precision spray system, which has helped the customer obtain deeper penetration of moisture into fabrics treated with durable water repellents. In Turkey, three new TexCoat G4 systems were installed in Çorlu, northwest of Istanbul, for a large producer of knit fabrics, such as T-shirts. “In Turkey, the manufacturer purchased and installed one TexCoat G4 system before COVID-19, and the customer was so pleased with the results that, during the pandemic, three more were purchased,” said Simone Morellini, Sales Manager- EMEAR at Baldwin and the commercial leader of the Turkish installations. “The systems were manufactured and installed during the lockdown, and now, all four systems are up and running, and being used heavily on a daily basis.” “With the success we have seen, we plan to apply the same strategies for upcoming installations, including the next one in Honduras: strong local management and customer coordination, combined with  effective remote support during the installation,” said Stanford.

• When it comes to smart fashion the uniqueness of Bemberg™ is crucial for every style

MURREN, the 100% made of Bemberg™ chemisier dress by ECOALF

Long sleeves, straight-cut with a shirt neck, buttons on the front and adjustable waist, the Murren dress by ECOALF is made from 100% of Bemberg™ by Asahi Kasei, made from the smart-tech transformation of pre-consumer material, cotton linter and in a closed loop system, converted through a traceable and transparent closed loop process  and is also biodegradable. The dress falls beautifully, thanks to the fabric it is made of.  As well as being sustainable, its silky soft to the touch, one of the main exceptional characteristics of Bemberg™. This casual dress is a ready-to-wear solution for every occasion being a classical must have of the woman wardrobe. Its breathable performance enhances and underlines Bemberg™ versatility of use.  

The Zurs Cargo pants by Ecoalf, 100% made of Bemberg™ 

Relaxed fit and lazy mood for the Zurs cargo trousers, with pockets and elastic in the hem. Also this style is 100% Bemberg™ and it is another demonstration of this material capability of being perfect for every occasion, as for this sporty outfit. Like every jogging pant has to be, it’s cool, gives superior comfort, and it’s breathable thanks to the incredible characteristics of the materials: controlling moisture, that keeps the body fresh and comfortable, and elasticity for freedom of movement.

• The Lenzing Group was the first Austrian company to send goods 100 percent “Made in Austria” by train directly to China.
• The train loaded with TENCEL™ fibers reached Xinzhu station in Xi'an on September 05.

Xi’an, China – The Lenzing Group is breaking new ground due to the short-term increase in demand for sustainably produced fibers from Chinese customers. For the first time, the company delivered wood-based cellulosic fibers, which are produced at the Austrian sites in Lenzing and Heiligenkreuz, directly to China by train. Thanks to this new transport route, Lenzing is able to meet the urgent demand of its Chinese customers twice as quickly as by the usual sea freight.

The first complete train with goods 100 percent “Made in Austria” started on August 20 in the presence of Leonore Gewessler, Federal Minister for Climate Action, Environment, Energy, Mobility, Innovation and Technology, His Excellency Xiaosi Li, Ambassador of the People's Republic of China in Austria, Stefan Doboczky, Chief Executive Officer of the Lenzing Group, Thomas Kargl, Board Member of the ÖBB Rail Cargo Group, Erwin Cootjans, Chief Executive Officer of Nunner Logistics, and Erich Hampel, Chairman of the Board of the B&C Private Foundation, at the Vienna South Terminal and reached his destination on September 05 at the Xinzhu train station in Xi'an, China. The train loaded with 41 containers with TENCEL™ branded lyocell and modal fibers and a total value of EUR 1.8 mn, passed a total of 10,460 km in seven countries: Austria, the Czech Republic, Poland, Belarus, Russia, Kazakhstan and China.

The first Lenzing fiber train was received in a grand ceremony on Tuesday, September 08 at the container terminal in Xi'an. Numerous guests, including the Austrian ambassador to China, Friedrich Stift, representatives of the Xi'an Municipal Government, the China Railway Xi'an Group, the Xi'an International Trade & Logistics Park as well as representatives of the Lenzing Group, the China National Textile and Apparel Council, Lenzing customers and the media attended the ceremony.

In his speech, Friedrich Stift, Austrian ambassador to China, emphasizes the importance of international trade and sustainable development: “The delivery of Austrian-made products through the CHINA RAILWAY Express adheres to the sustainable concept of Lenzing. Since China and Austria signed the bilateral railway cooperation agreement in 1994, the two countries have maintained good cooperation in the railway field and will continue to do so in the future. China is Austria's largest partner in Asia, and it is believed that after the outbreak of the corona crisis bilateral trade will normalize in 2021.”

“This is the first time for the Lenzing Group to deliver Austrian-made TENCEL™ branded fibers directly to Chinese customers. The Silk Road has been a main transport route between Europe and Asia since ancient times. Chinese consumers affectionately call TENCEL™ fibers ‘Silk from Heaven’. The China-Europe Express can reduce the transport time between Europe and China by half, thus meeting Chinese customer’s demand for environmentally friendly fibers more quickly”, states Hu Jian, Senior Vice President of the Lenzing Group for North Asia.

In the joint project "AeroFurnace" funded by the German Federal Ministry of Economic Affairs and Energy (BMWi), the consortium, consisting of the Bavarian Center for Applied Energy Research e.V. (ZAE Bayern) as joint coordinator, the furnace manufacturer FCT Systeme, and SGL Carbon has succeeded in improving the thermal insulation properties of a new composite material by up to 120 percent compared to commercially available felt-based carbon materials. This enabled the project partners to move into a new quality level of thermal insulation in high-temperature industrial applications and pave the way for more energy efficient thermal insulation.

Dr. Gudrun Reichenauer, coordinator of the joint project and head of the work group Nanomaterials at ZAE Bayern: "In this project, we have been able to make the latest findings from the world of nanomaterials accessible to the market through intensive cooperation and thus set new standards in the field of thermal insulation materials."

Dr. Thomas Kirschbaum, project manager at SGL Carbon: "In furnace simulations at the partner FCT, we have already been able to demonstrate what the new material can do: Depending on the temperature program, up to 40 percent of the required process energy can be saved with the new thermal insulation material. The potential of the new material is great." This prediction will be reviewed under real conditions in a demonstrator component in the second half of 2020 as part of the still ongoing BMWi project.

Dr. Jürgen Hennicke, project lead and head of R&D at FCT Systeme: "As a leading manufacturer of industrial vacuum or inert gas high temperature furnaces, the new generation of insulating materials enables us to create furnaces with a more favorable ratio of usable space to external dimensions, thus offering customers improved cost efficiency and productivity".

Based on laboratory samples in plate form it has already been demonstrated that the production of the new material can be represented by technically simple processes and is in principle well scalable. However, there is still a long way to go before the product is ready for serial production.

The third largest share of final energy in Germany is used for the generation of heat in industrial processes (22.6 percent). In many industries, e.g. in the steel and ceramics industry, energy-intensive high-temperature processes run above 1000°C – these alone require almost 50 percent of the industrial process heat. Suitable thermal insulation materials can significantly reduce energy demand while maintaining the same usable volume.

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

In these difficult times of the worldwide COVID-19 crisis, flexible reactions and fast decisions can be of imminent importance, particularly in the fragmented composite industry with its back-bone of small and medium-sized enterprises (SMEs).

In response, the Industrial and Business Consulting company AMAC under the lead of Dr. Michael Effing has signed today a cooperation agreement with Alpha Executive Advisory to jointly offer advisory services in Business Coaching, Acquisitions & Divestitures as well as Business Transformation and Crisis Management, also ad interim.

In detail, this cooperation is to identify the right fit in terms of capabilities and financial strength for companies looking for expansion or divestiture, to deliver support to innovative young start-up firms in order to faster penetrate the market and to smoothen the transition to the next owner in interim management or to make the next appropriate strategic step.

Mr Atte Virtanen has been appointed Head of Business Development at the Fortum Bio2X bioeconomy programme as of 1 May 2020. Atte will play a key role in establishing Bio2X partnerships, helping partners to advance more sustainable businesses, as well as developing industrial biorefinery operations together with the programme team.

Before joining Fortum, Atte was working 10 years in the Netherlands for Trespa International B.V and in Italy for Arpa Industriale S.p.A. In both companies, he was leading R&D activities in the areas of cellulose materials and thermosetting resins. In addition, Atte gained experience from production environment during his time at Stora Enso’s Kotka mills, where he worked several years both in paper production and in a paper impregnating plant.

Over the years, Fortum Bio2X has built a team with a focus on research and development, including piloting different production technologies. The programme is now moving on to the next phase by developing competencies in operations and maintenance. As part of this phase, Atte will help to shift the attention to commercializing the biomass fractions.

The Bio2X programme is part of Fortum’s strategy to build options for significant new businesses that improve resource efficiency and provide smart solutions. It aims to be the straw refiner with superior material efficiency and a leading supplier of responsible textile fibres. Bio2X focuses on an efficient use of the cellulose, hemicellulose and lignin fractions in order to replace fossil or otherwise detrimental raw materials in numerous end-use applications.

Energiapura – Production of reusable, customised protective masks that are also fashion accessories

• The Italian company, a specialist manufacturer of functional sportswear, conducted research and began producing masks in response to the COVID-19 crisis
• Using Mimaki sublimation printers, the masks can be customised, getting away from their connotation with hospitals and transforming them into a fashion accessory

From functional sportswear to combatting the spread of the Coronavirus: Energiapura, an Italian company has developed a mask that meets the Class I medical device requirements. The EP PA 2020 (Energiapura Pure Air) facial device, optimised for air filtering and breathability, provides protection while working, and can be reused. But Energiapura has gone even further, branding and customising the masks with sublimation printing.
The EP PA 2020 mask, compliant with 93/42 EEC Medical Devices – Class I washable, meets the essential requirements of UNI EN 14683:2019. Having redirected the manufacturing process, Energiapura is now stepping up production levels to meet the rising demand from hospitals, pharmacies, chemists, companies and consumers.

Pure Air, Energiapura’s mask
The EP PA 2020 is based on a functional concept: protection, breathability and reusability are the main principles. EP PA 2020 is made up of three layers of fabric: the first, the outer layer, is DWR-treated polyester, the second is TNT polyester, providing a filtering function, and the third, which comes into contact with the face, is polyester containing special fibres, such as coolmax and carbon.  Therefore it can be reused via normal washing and steam ironing, which also sterilises it.
The CEO of Enegiapura, Alberto Olivietto explains the idea of the customisation of the mask: “We wanted to disassociate our masks from the hospital image. By decorating them with company branding and designs provided by customers.” This is where the Mimaki JV300 wide-format printer comes in.

Strategic Cooperation in Advanced Materials and Composite Machine Technologies between REACH Group/China and AMAC/Germany

A close cooperation, especially in difficult times like the Covid-19 crisis, is more and more important for sustainable success. Today, Reach Group/China and AMAC/Germany signed a cooperation agreement to
strengthen their business between China and Europe in the field of advanced materials and composite machine technologies.

Reach Group, based in Shanghai is a comprehensive group company present in the composite industry since 1996. AMAC is an expert advisor and business enabler in composite solutions based in Aachen, Germany.
Now the companies want to cooperate in the field of materials on Thermoplastic composites, bio-based materials, materials for additive manufacturing, additives for high performance and in the field of composite machine technologies on tape placement solutions, continuous lamination machines, 3D-printing as well as on advanced automated thermoset processing.

The cooperation will be presented at the next China Composite Expo on September 2-4, 2020 in Shanghai.

Textile innovator and specialty chemical producer Devan answers questions regarding anti-viral textile finish solutions following the growing spread of the COVID-19 outbreak.

Over the past few weeks, Devan has received a lot of questions regarding an antiviral solution for textiles against Sars-COV-2, the virus that causes COVID-19. “Not a big surprise since we put BI-OME AV forward 3 years ago. Testing has been done in cooperation with Institut Pasteur de Lille”, says Devan CEO Sven Ghyselinck. Devan studied enveloped viruses (e.g. H1N1, Corona-types, etc.) as well as naked viruses (e.g. Rotavirus). For both virus families, BI-OME AV showed strong to excellent activity in wet state.

In the first instance, the company wants to focus on professionals who need to stay working such as policemen, logistics workers, shop employees, day-care workers, … A common complication of respiratory viral disease can be a secondary bacterial infection. Professionals could be helped with either an anti-bacterial on their facemask to reduce the chance for these secondary bacterial infections, for better hygiene and less odor build-up. On workwear, a combination of a virus spread reducing and antibacterial solution could help as these garments are typically used during long hours, are non-disposable and most likely will be washed at home.

Devan has solutions which withstand washing while keeping its performance. BI-OME as a liquid product is EU BPR, Turkish BPR and US EPA registered. Depending on the rash region, commercialising treated articles be subject to additional local registration procedures.