From the Sector

The Trevira CS brand is celebrating its debut at Clerkenwell Design Week (CDW), which takes place in London from May 21-23 2024. The brand is particularly targeting interior architects, interior designers, and contract furnishers to present its innovations on sustainability. Trevira CS stands for flame retardant fabrics that have been tested for fire safety. They also offer numerous sustainable properties.

The London borough of Clerkenwell is home to more creative businesses and architects per square mile than anywhere else in the world, making it one of the most important design hubs in the world. To celebrate this rich and diverse community, Clerkenwell Design Week has created a unique opportunity to showcase the world's leading interior design brands. With more than 600 events in over 160 showrooms, more than 11 curated exhibitions, stunning installations, talks and a supporting program, CDW has established itself as the UK's leading design festival. The Trevira CS stand is part of the "German Collection - home to German Contemporary Design", which brings together a leading selection of renowned German brands.
 
The product range of flame-retardant Trevira® filament yarns now also includes 30 spun-dyed, UV-stable yarns, which are particularly suitable for outdoor use in fabrics in the hospitality sector and on cruise ships due to their high light fastness and UV resistance. They also score points for their sustainable properties, as the fabrics made from them can be produced in a more environmentally friendly way than textiles made from conventional yarns.

Trevira CS fabrics are also available in recycled versions. They consist of fiber and filament yarns that are obtained in various recycling processes. Fabrics made from these yarns can obtain the Trevira CS eco trademark. The prerequisite for this is a recycled content of at least 50%.

Intertextile Shanghai Home Textiles will mark its 30-year milestone at the National Exhibition and Convention Center (Shanghai) this autumn, from 14 – 16 August 2024. With industry players from around the world gearing up to join this year’s anniversary edition, the showcase will feature returning pavilions, a new product zone, and exhibitors with a wide range of fabrics and more.

30th anniversary celebration
With the ‘Intertextile’ brand present in the Chinese textile market since 1995, increasing market demand, both domestically and internationally, has contributed to the consistent upward trajectory of Intertextile Shanghai Home Textiles – Autumn Edition.

By utilising advanced technologies and abundant resources, China has earned its global reputation as one of the major manufacturing hubs for home textile products. Chinese home textile exports reached over USD 4.8 billion in the first two months of 2024, a year-on-year increase of 13.7%[1], demonstrating a welcome recovery. On the other hand, the country’s huge population, coupled with its increasing per capita textile consumption and home renovation projects, is providing a plethora of business opportunities for international suppliers to discover.

Featured zones and country pavilions
At this special edition, a new product zone will be unrolled for the first time–the Carpets & Rugs Zone. Set to feature various related products, the rising demand for these floor coverings has prompted the birth of this new featured zone. Meanwhile, the sought-after Designer Studio will return to help buyers achieve product-specific sourcing goals. Furthermore, with carpets, curtains, sun protection, leather, and many more home textiles all zoned accordingly under one roof, buyers will be able to source from a full range of products.

The Belgium and Türkiye Pavilions will once again showcase various product series from premium brands, alongside a comprehensive list of domestic exhibitors and multiple standalone international suppliers set to present their latest innovations and designs.

Beyond exhibitors’ booths, the fair’s anticipated fringe programme will showcase innovations and discuss market trends, such as broadly discussed AI and sustainability topics, to help fairgoers stay ahead of the curve. Simultaneously, the Danish trend agency SPOTT, founded by Ms Anja Bisgaard Gaede, also the leading trend agency for Heimtextil 2024, will be collaborating with the fair for the first time this year. The organisation will present an innovative trend area, set to illustrate design inspiration and industry direction for the upcoming season, through a series of creative displays. In addition, Mr Shen Lei, Founder and Design Director of Interior Architects Design, and the Chinese representative of the Intertextile International Lifestyle Trend Committee, will be returning this year to delve into design topics via his seminar.

^[1] Tnc.com.cn：Analysis of China’s home textile exports from January to February 2024. https://www.tnc.com.cn/info/c-001001-d-3742104.html

Integrated textile mill Nuevo Mundo is partnering with Archroma to offer collections utilizing Archroma’s EarthColors® agricultural waste based dyes and produced with zero liquid discharge and substantial resource savings.

A strategic partner of apparel brands, Nuevo Mundo is a market leader in South America with a 75-year history. It helps brands expand into new markets with value-added products that capture growing consumer demand for quality and sustainability. The company is a pioneer in the adoption of water-saving processes and chemicals that have minimal impact on the environment.

Nuevo Mundo is now reinforcing its commitment to sustainability with the creation of new collections that utilize Archroma’s biowaste-based EarthColors® dyes. Based on patented Archroma technology, these high-performance dyes are from non-edible agricultural or herbal industry waste in a process that helps to reduce the negative impact on water footprint, natural resources and climate change compared to conventional synthetic dye production where toxic and non-renewable oil derivative products are used as raw material.*

The organic raw materials used for the dyes created for Nuevo Mundo include residues from cotton plants, beets and saw palmetto. In addition to using these biowaste-based dyes, the EarthColors® collections will be produced in Nuevo Mundo’s zero liquid discharge facilities, providing savings in time, water and energy, as well as emissions.

Nuevo Mundo and Archroma intend their alliance to be a long-term collaboration, with plans to release new collections based on EarthColors® in the coming year and beyond.

*Based on internal LCA comparative screening

International technology group ANDRITZ has successfully started up a new nonwovens production line supplied to Teknomelt Teknik Mensucat San. ve Tic. A.S. in Kahramanmaras, Türkiye. The new neXline wetlace CCP (carded-carded-pulp) line produces nonwoven roll goods for biodegradable, plastic-free wet wipes

By combining the benefits of two technologies, spunlace and wetlaid, the line enables the use of bio-based fibers, like viscose and wood pulp, to produce a high-performance and sustainable wipe with the same technical product characteristics and performances as a conventional wipe made of synthetic fibers while protecting the environment.

Teknomelt is one of the leading manufacturers of nonwoven meltblown, spunbond, SMS and SMMS fabrics in Türkiye. The company serves a wide range of markets, exporting 45% of its production. With the new ANDRITZ Wetlace CCP line, the company is expanding its range of sustainable nonwovens production for wipes. 

The DITF is leading the joint project "DACCUS-Pre*". The basic idea of the project is to develop a new building material that stores carbon in the long term and removes more CO₂ from the atmosphere than is emitted during its production.       

In collaboration with the company TechnoCarbon Technologies, the project is now well advanced - a first demonstrator in the form of a house wall element has been realized. It consists of three materials: Natural stone, carbon fibers and biochar. Each component contributes in a different way to the negative CO₂ balance of the material:

Two slabs of natural stone form the exposed walls of the wall element. The mechanical processing of the material, i.e. sawing in stone cutting machines, produces significant quantities of stone dust. This is very reactive due to its large specific surface area. Silicate weathering of the rock dust permanently binds a large amount of CO₂ from the atmosphere.

Carbon fibers in the form of technical fabrics reinforce the side walls of the wall elements. They absorb tensile forces and are intended to stabilize the building material in the same way as reinforcing steel in concrete. The carbon fibers used are bio-based, produced from biomass. Lignin-based carbon fibers, which have long been technically optimized at DITF Denkendorf, are particularly suitable for this application: They are inexpensive due to low raw material costs and have a high carbon yield. In addition, unlike reinforcing steel, they are not susceptible to oxidation and therefore last much longer. Although carbon fibers are more energy-intensive to produce than steel, as used in reinforced concrete, only a small amount is needed for use in building materials. As a result, the energy and CO₂ balance is much better than for reinforced concrete. By using solar heat and biomass to produce the carbon fibers and the weathering of the stone dust, the CO₂ balance of the new building material is actually negative, making it possible to construct CO₂-negative buildings.

The third component of the new building material is biochar. This is used as a filler between the two rock slabs. The char acts as an effective insulating material. It is also a permanent source of CO₂ storage, which plays a significant role in the CO₂ balance of the entire wall element.

From a technical point of view, the already realized demonstrator, a wall element for structural engineering, is well developed. The natural stone used is a gabbro from India, which has a high-quality appearance and is suitable for high loads. This has been proven in load tests.  Bio-based carbon fibers serve as the top layer of the stone slabs. The biochar from Convoris GmbH is characterized by particularly good thermal insulation values.

The CO₂ balance of a house wall made of the new material has been calculated and compared with that of conventional reinforced concrete. This results in a difference in the CO₂ balance of 157 CO₂ equivalents per square meter of house wall. A significant saving!

* (Methods for removing atmospheric carbon dioxide (Carbon Dioxide Removal) by Direct Air Carbon Capture, Utilization and Sustainable Storage after Use (DACCUS).

INDA, the Association of the Nonwoven Fabrics Industry, announced a call for abstracts for IDEA®, April 29-May 1, 2025, Miami Beach Convention Center, Miami Beach, Florida. IDEA attracts thousands of nonwoven professionals from all functional areas spanning the entire supply chain.

The theme for IDEA25 is “Nonwovens for a Healthier Planet” highlighting nonwoven advancements in sustainability.

Product developers, designers, engineers, technical scouts, and marketing professionals accountable for their product’s environmental impact will attend IDEA. Presentations will focus on responsible sourcing, innovations in sustainability, and end-of-life solutions for nonwovens and its related industries.

A few examples of topics for consideration are:

RESPONSIBLE SOURCING

• Natural Fibers (Cotton, Hemp, Bamboo, Banana, Wood Pulp, Regenerated Cellulose, Wool, Fur, Chitin, Feathers)
• Polymers (Biopolymers, Regenerated and Recycled polymers, Unconventional and Alternatives to Traditional Polymers)
• Sustainable Chemistries (finishes, lubricants, adhesives, and additives)

INNOVATIONS IN SUSTAINABILITY

• Process Improvements with Sustainability Impact (reduced waste, reduced energy, reduced water consumption)
• Product Design Improvements with Sustainability Impact (lightweighting, designs for end-of-life, “good enough” design)

END-OF-LIFE SOLUTIONS

• End-of-Life or Next-Life Considerations (compostability, biodegradability, recycling, advanced recycling and circularity)
• Presenting is an opportunity for technical professionals to showcase pioneering research, innovative solutions, and expert insights with technology scouts.

Abstracts must be submitted via the INDA website by June 7, 2024.

The announcement of a new effluent treatment plant (ETP) marks a milestone in Denim Expert's journey towards sustainability. This upcoming facility is a testament to the company's dedication to reducing its ecological footprint and safeguarding local ecosystems through advanced water management techniques.

The new Effluent Treatment Plant (ETP) being developed by Denim Expert strives for 100% wastewater recycling. As the ETP rises from concept to reality, Denim Expert embarks on a transition towards its next horizon: aligning with the Zero Discharge of Hazardous Chemicals (ZDHC) Wastewater Guidelines Version 2.0.

Denim Expert's proactive approach to sustainability has been recognized on a global scale. The company has been named 'New Champion' by the World Economic Forum and has partnered with organizations such as the Sustainable Apparel Coalition (SAC), the United Nations Framework Convention on Climate Change (UNFCCC), and the Ellen MacArthur Foundation's Jeans Redesign program. As one of the first factories to join the Partnership for Cleaner Textile (PaCT) and in the process of implementing the 3E program, Denim Expert is dedicated to achieving 100% water reuse and full reliance on solar energy, further solidifying its commitment to driving positive environmental change.

Hermann Finckh received the JEC Composites Innovation Award in the category Equipment Machinery & Heavy Industries for the innovation MAXIMUM WEIGHT REDUCTION OF COMPOSITE TOOLS. The research team from the German Institutes of Textile and Fiber Research Denkendorf (DITF) developed a new modular cutting tool for woodworking machines, which was produced and successfully tested by the industrial partner Leitz GmbH & Co. KG.

The extremely lightweight planing tool was made from carbon fiber-reinforced plastics (CFRPs) instead of aluminum using a completely new modular construction principle. As a result, it weighs 50 percent less than conventional tools. It enables significantly higher working speed, which enables a one-and-a-half-fold increase in productivity. The development of the extreme-lightweight principle was performed by numerical simulation and every solution was virtually tested in advance. A patent application has been filed for the concept.

Avery Dennison, a leader in materials science and digital identifications solutions, has completed a project with NRVLD, a community-based agency comprising artists, technologists and media personalities who are passionate about disruptive innovation.

Avery Dennison created limited edition augmented reality T-shirts worn by the NRVLD Executive Team during ‘NRVLD’, an immersive event held during Art Basel Miami Beach in December 2023.

The 30 T-shirts were digitally connected via heat transfers featuring a QR code and image recognition. Visitors were transported to an immersive artwork metaverse, built by ARkivist. In addition to the AR experience, each garment was personalized with the wearer's contact details embedded in the NFC woven patch on the chest, providing a connection point for guests throughout the event. Both connected garment experiences were powered by Avery Dennison’s atma.io connected product cloud.

Avery Dennison will be showcasing this project at NRF 2024: Retail’s Big Show, from January 14-16 at the Javits Convention Center in New York. The connected T-shirts will feature alongside a host of apparel digital solutions for supply chain visibility, product tracking, and consumer engagement.

Michael Colarossi, vice president, innovation, product line management and sustainability, Apparel Solutions, Avery Dennison comments: “The trajectory of consumer experiences unmistakably leans towards digital, and brands are actively seeking innovative methods to engage consumers by merging traditional craftsmanship with digital creativity. In this scenario, AR acted as the conduit, and Avery Dennison's connected garment technology and on-garment Embelex branding turned that vision into tangible reality."

Pavan Bahl, founder of Bellwether Culture and co-founder NRVLD, comments: "In the Web3 sphere, blockchain technology enables ownership of digital goods and identity. Our collaboration with Avery Dennison showcases the potential of bridging this gap, illustrating the exciting possibilities in this space."

B&B Italia unveiled a special edition Camaleonda, the iconic sofa system by Mario Bellini, adorned in a brand-new fabric designed by Stella McCartney – platforming her S-Wave monogram. Marking the second chapter of the partnership between the British conscious luxury pioneer and the Italian design house, the collaboration was launched at Art Basel Miami Beach on 6th December 2023 as part of an installation at B&B Italia Design Studio’s grand opening. The Camaleonda is crafted from nearly entirely sustainable materials, materialising both brands’ nature-positive visions.

The partnership between B&B Italia and Stella McCartney was born of Stella’s long-time personal passion for Bellini’s works and started in 2022 with the Le Bambole armchair. It evolves now with the new version of Camaleonda, the sofa system originally designed in 1970, which made its comeback 50 years later in 2020 - speaking a contemporary language between structural solutions and sustainable choices.

The brand-new Stella McCartney X B&B Italia Camaleonda introduces the latest printed fabric “S-Wave”, which is the result of a next-generation sustainability innovation introduced by the design company’s R&D team. The S-Wave upholstery, available in two different colours, is based on OceanSafe naNea yarn, which is verified to be biodegradable, Cradle to Cradle Certified® Gold and does not contain harmful substances. The material does not shed persistent microplastics into the environment, however, performs like conventional materials.