From the Sector

Devan Chemicals recently added two more products to its range of bio-based textile finishes. One being a softener, the other one a quick-dry finish. Both are derived from vegetable oils and are in line with the company’s latest innovations on bio-based chemistry.

Due to the Covid-pandemic, serving as an accelerator for a worldwide green economy, the textile industry is increasingly seeking more sustainable and products fit-for-circular programs. According to McKinsey & Company, the textile industry will experience innovation surrounding sustainably sourced raw materials and bio-based chemical additives to accommodate increasing consumer demand.

Devan launched its first bio-based technology in 2019 and is fully committed to making bio-based versions of their existing textile finishes. ‘We have put ourselves on a mission to be able to extend our Bio-Based range further”, says Sven Ghyselinck, CEO of Devan. “We wanted to make an even bigger impact on circularity than before, therefore we looked into what fabric producers use a lot: softeners and moisture management systems. Only by focusing more on the large volume products, can we support the industry to have a bigger impact on sustainability. After the growing success of our natural antimicrobial BI-OME NTL, we are proud to now introduce our new natural Passerelle line”.

Passerelle Soft NTL is a durable softness technology based on vegetable ingredients. The technology is wash durable and can be used with natural fibres like hemp, cotton, but is also fit for synthetic fibres like rPES, PA. The bio content of the technology is above 85% (ASTM D6866-20).

Passerelle Quick-Dry NTL is a moisture management technology also based on vegetable ingredients. This bio-based finish enables high wicking and evaporation capability which helps to evaporate water/sweat easier and faster. The technology is also > 60% (28 days) biodegradable according to OECD 301B.

Oerlikon signs agreement to acquire INglass, a global leader in high precision polymer flow control equipment, to accelerate expansion strategy in polymer processing market

• INglass and its HRSflow Division is a market leader spezialized in hot runner sytems
• Technology is highly complementary to Oerlikon’s existing capabilities in polymer flow control and will expand Oerlikon’s market access
• Acquisition accelerates Oerlikon’s strategy in diversifying its manmade fibers business to expand into the high-growth polymer processing solution market
• Oerlikon renames ‘Manmade Fibers’ Division to ‘Polymer Processing Solutions’
• Acquisition is expected to be completed in the second quarter of 2021

Oerlikon, a leading provider of surface engineering, polymer processing and additive manufacturing, announced today that it has signed an agreement to acquire Italy-headquartered INglass S.p.A. and its innovative hot runner systems technology operating under its market-leading HRSflow business.

The strategic acquisition is a significant step in expanding Oerlikon’s current manmade fibers business into the larger polymer processing market. The acquisition accelerates and enhances existing organic initiatives to diversify and strengthen the company’s core high-precision polymer flow control capabilities, products and services. The completion of the transaction is subject to customary regulatory approvals and is expected by the second quarter of 2021.

To reflect Oerlikon’s expansion into a larger high-growth market, the Manmade Fibers Division will be renamed as Polymer Processing Solutions Division. This division will have two business units: Flow Control Solutions and Manmade Fibers Solutions. The busines unit Flow Control Solutions will combine the expertise of Oerlikon Barmag’s existing gear metering pumps business line and INglass’ HRSflow operations. The business unit Manmade Fibers Solutions will continue to focus on growing the existing chemical fiber machinery and plant engineering business, offering plant solutions for the production of polyester, polypropylene and polyamide.

“Our new Polymer Processing Solutions Division and the acquisition of INglass S.p.A. and its HRSflow business are critical components of Oerlikon Group’s growth strategy. We are accelerating our efforts to drive sustainable organic and inorganic growth in all of our businesses. The acquisition enables new synergy opportunities between both Oerlikon divisions in specific end markets such as automotive. With INglass and its HRSflow operations, we acquire leading suppliers in their markets with proven success of their technologies and services,” said Dr. Roland Fischer, CEO Oerlikon Group.

“We firmly believe that within the Oerlikon Group we can further exploit the potential of our hot runner systems technology and, when combined with the capabilities of Oerlikon Barmag gear metering pumps and their melt distribution engineering competence, will position our business as one of the leading precision flow control specialists for multiple applications in a global growth market”, said Antonio Bortuzzo, CEO of INglass S.p.A.

New business unit offers great growth potential

The Oerlikon Barmag competence brand already offers high precision flow control related components, including a large selection of gear metering pumps for textile and non-textile markets. These highly efficient pumps are used in silicone casting, dynamic mixing and oil spraying for the chemical, paint, polymer processing and automotive industries. This double-digit million CHF business, which has grown in recent years, will be merged with INglass’ HRSflow hot runner technologies under the new business unit Flow Control Solutions. HRSflow’s excellent market access to many OEMs in and outside the automotive industry brings significant growth opportunities.

INglass is a leader in automotive and expanding in other sectors

INglass S.p.A. is an internationally operating successful company established in 1987. Its product portfolio includes hot runners as well as engineering and consultancy services for the advanced development of polymer processing products. INglass’ HRSflow hot runner systems are applied in multiple industries from automotive, consumer goods and household appliances to packaging, waste management, construction and transportation.

INglass is headquartered in San Polo di Piave, Italy, near Venice. 2020 revenues of INglass were approximately CHF 135 million and the acquisition is expected to be immediately accretive to Oerlikon’s margins and cash flows. INglass has more than 1 000 employees and 55 sites worldwide, including production plants in Italy, China and the US. Among these sites are INglass’ newly renovated headquarters and production at its primary location in San Polo di Piave near Venice, Italy. The investment modernized the facilities with automated production, underlining the company’s commitment to sustainability and the environment. The other two modern production sites are in Zhejiang (Hangzhou Province) in China and Michigan (Grand Rapids) in the USA.

Following the integration with Oerlikon Barmag’s gear metering pumps business of about 200 employees in Remscheid, Germany, the new Flow Control Solutions business unit will have round about 1 200 employees.

"We see great potential for growth in our new Flow Control Solutions business unit,” said Georg Stausberg, Polymer Processing Solutions Division CEO and Member of the Executive Committee of the Oerlikon Group. “The businesses form the two core growth pillars and benefit from each other in global market development, in modern and digitized production, and in customer services. We also see potential synergies in R&D by combining existing know-how in the field of polymer processing. New technological solutions between hot runner systems and gear metering pumps are conceivable. We also anticipate collaborating more closely with the Oerlikon Surface Solutions Division, particularly in future mobility applications and functional polymer component solutions for the automotive industry. All in all, we will offer our customers innovative and attractive solutions in the field of polymer processing and high precision flow control components.”

Next steps for further diversification of the division product portfolio are already ongoing

Combining the divisions plant engineering and process know how with expertise on high precision flow control components technologies has a significant impact on product quality in nearly all applications, which opens up a platform for further organic and inorganic growth. "We are closely observing the megatrends in the markets and developing new business models to match. In the area of sustainability, covering topics such as circular economy, the recycling of materials using mechanical and chemical recycling solutions, as well as the handling of new, more environmentally friendly and biodegradable materials, we are on the verge of a breakthrough. We are ready to actively participate in these growth areas,” added Georg Stausberg.

“In realigning the Polymer Processing Solutions Division, Oerlikon will continue to apply our successful recipe of a lean organizational structure to efficiently manage the business. This means clear processes, short decision-making paths and competent teams in a diverse and multicultural organization in which everyone can contribute innovatively to create customer value,” said Georg Stausberg.

Baldwin Technology Company Inc. has launched Unlocking Potential, a new podcast series that covers the latest trends, innovations and technologies in key industries—from packaging and converting, to security printing, textile production, film extrusion and more.

The first episode debuted February 1, and it shares the history and evolution of Baldwin, which recently marked 100 years of innovation. Episode 2 features a conversation with Baldwin experts about security printing advancements.

“We are excited to introduce this opportunity to share ideas, insights and educational content with customers, partners and associates around the world,” said Baldwin’s Chief Marketing and IoT Officer Steve Metcalf, who joined Chief Commercial Officer and longtime Baldwin team member Peter Hultberg on the inaugural episode. “In a time when traditional trade shows and conferences are being reimagined, podcasting provides a familiar platform for us to be conversational again.”

Future episodes will delve into the latest in curing technology for specialized manufacturing applications, the transformation of cleaning processes and consumables for printing, and other topics, as markets and industries continue to evolve.

• Full-width automated cleaning system will be installed on high-graphics corrugated presses

Baldwin Technology Company Inc. has successfully landed three new FlexoCleanerBrush orders, with a total of 16 cleaning heads, from customers in the US and Germany. During the COVID-19 pandemic, Baldwin has delivered a total of 30 FlexoCleanerBrush cleaning heads, thanks to close collaboration between onsite team members, local agents, the company’s global sales organization, and support from its product and technology center in Germany. With the FlexoCleanerBrush system, an inline cleaning station installed within each print unit uses a brush that runs the full width of each printing plate. Paired with a precision spray application system, the FlexoCleanerBrush evenly distributes a mixture of detergent and water across the plate as it spins, gently cleaning its surface. The plates are then dried by the integrated air knife.

“With two of the recent orders, the customers had already installed the FlexoCleanerBrush in other locations. One of them reported as much as a 30 percent production capacity increase, thanks to the  installation,” said Lee Simmonds, Regional Sales Manager at Baldwin. “Both customers have experienced insufficient results with their original traversing cloth cleaning systems, which will now be removed and replaced with the full-width, stand-alone, automated FlexoCleanerBrush technology from Baldwin.”

Improving sustainability is one of the key drivers for investments in the corrugated printing industry. The FlexoCleanerBrush dramatically cuts water waste by cleaning plates more efficiently. In a recent independent study that was conducted to validate the capacity of the automated system, the FlexoCleanerBrush could fully clean and dry all printing plates in less than four minutes and pick hickeys in seconds.

Besides offering efficient cleaning during runs and fast end-of-job cleaning, the FlexoCleanerBrush system also enables operators to remove dry plates from the machine without the potential risk of plates sticking together once they are placed back in the plateracking system. This helps to ensure increased board throughput, less downtime and a safer working environment by eliminating operators’ contact with nip points, moving parts and chemicals.

• Mostafiz Uddin, Managing Director of Denim Expert Limited and Founder of Bangladesh Apparel Exchange (BAE) has won Sustainable Fashion Champion at the Drapers Sustainable Fashion Awards 2021, which took place virtually on 10 March.

On receiving the award, Mostafiz said he wants to be a game-changer in the apparel industry, leading by example to inspire others to behave responsibly and ethically.

He also dedicated the award to H&M which, he explained, supported his business, Denim Expert, through the pandemic by continuing to place orders He said the loyal support of the Swedish fashion giant almost certainly helped save the livelihoods of 2000 workers at his factory and their 10000 family members. “That’s true sustainability leadership,” he said.

The Drapers Sustainable Fashion Awards recognise steps being made in reducing the fashion industry’s environmental impact and creating fairer working conditions across the supply chain.
Judged by an independent panel of sustainability and fashion retail experts, the awards shine a spotlight on best practice within the global fashion industry.

Covid-19 has presented unforeseen challenges for fashion retailers and brands, but it has also given us all an opportunity to build back better. Forward-thinking fashion businesses know change is not optional, and are embracing their responsibilities and ability to make a difference.

Mostafiz Uddin has been recognised as the Sustainable Fashion Champion 2021 for setting examples in promoting sustainability during the Covid-19 pandemic which broke out worldwide in March last year.
Jill Geoghegan, Acting Editor of Drapers, said: “Despite the challenges thrown up by the Coronavirus pandemic, fashion brands and retailers increasingly recognise that sustainability is a business imperative.”  
“Many businesses continued to invest in cleaning up their supply chains and introducing new models of working, despite the unprecedented trading conditions.

“The Drapers Sustainable Fashion Awards highlight and celebrate these advancements, paving the way for a more responsible future for the industry.” Managing Director of Denim Expert Limited Mostafiz Uddin said: “In the pandemic, my factory Denim Expert Limited kept true to its commitment towards sustainability, despite an extremely difficult trading landscape.

“During the pandemic, I was vocal about the issue of buyer-supplier relationships and, in speaking out, I wanted to champion the cause of suppliers all over the world. Too often suppliers in garment supply chains do not have a voice because they fear that by speaking out, they will be treated unfavourably by brands.

“This was, of course, a risk on my own part but I like to think I stood up for what I think is right and ultimately, I believe progressive brands understood I was coming from a good place. Like them, all I want to see is a fair, ethical and sustainable industry where brands and retailers work in an environment of collaboration, not conflict.”

Mostafiz also had some special praise for H&M. He said: “It would have not been possible for me to support my workers during the pandemic, had my factory not received help from H&M during the unprecedented time. While Denim Expert suffered from huge orders cancellation and orders hold, H&M supported us by placing orders in the pandemic that saved thousands of lives and livelihoods. Therefore, I would like to dedicate this Award to H&M and its CEO Helena Helmersson.”

The judges of Drapers Sustainable Fashion Champion Award 2021 have been Kerry Bannigan, Founder, Conscious Fashion Campaign; Sarah Ditty, Global Policy Director, Fashion Revolution; Miriam Lahage, Founder, Aequip; Samata Pattinson, CEO, Red Carpet Green Dress; Caroline Rush, Chief Executive Officer, British Fashion Council; Lucy Shea, Group CEO, Futerra; Jane Shepherdson, Chairman, My Wardrobe HQ; and Dilys Williams, Director, Centre for Sustainable Fashion.

• Combined HCl acid and steam generation enables significant energy savings and increased cost efficiency

SGL Carbon delivered a Hydrochloric Acid (HCl) synthesis unit with integrated steam generation to Travancore-Cochin Chemicals Ltd. (TCCL), a major producer in the chlor alkali business in South India. End of January, TCCL officially inaugurated its plant in Kochi in India’s Kerala state. Since then, the unit has already been ramped up at the customer’s site to full capacity.

The synthesis unit uses the efficient membrane wall technology and has a capacity of 60 tons of HCl per day. As an additional benefit, this innovative design enables the recovery of waste heat generated in the synthesis unit from the reaction of Hydrogen & Chlorine to produce up to 33 tons of steam at the high pressure of 10 bar every day. This steam can be used elsewhere in the chlor alkali plant, for example when concentrating caustic to flakes. As a result, the energy efficiency of TCCL’s plant goes up substantially since a huge portion of their steam demand can be covered by SGL’s unit. Thereby this helps to save costs as well as reduces CO2 emissions by more than 1.500 tons per year potentially.

The HCl synthesis has been completely engineered and produced at SGL’s production site in Pune, India. Scope of supply also included civil modification services at the customer site on a turnkey basis.

 “Our innovative combined HCl synthesis and steam production units offer a great business value to our customers in the growing Indian chemical market. Together with our proven technical and engineering competence on a global scale we can help our customers to enhance their energy efficiency as the example of TCCL shows”, comments Suneet Sangam, Sales Manager at SGL Carbon India.

“By engineering and producing our units also at SGL’s production site in India, we further strengthen our position as a global process solution provider for corrosive applications leveraging our extensive expertise from our worldwide network. Realizing such ambitious projects in these challenging times of Covid restrictions shows how capable our global team is.“ says Christoph Koch, Director Sales EMEIA at SGL Carbon.

Order Intake Continued to Recover in the Fourth Quarter of 2020:

• Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
• As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
• EBIT margin of around -15% and net profit of around -16% of sales expected
• First half of 2021 still heavily impacted by the COVID-19 pandemic
• Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

As expected, as a consequence of the economic effects of the COVID-19 pandemic, the Rieter Group closed the 2020 financial year with considerably lower sales than in the previous year. According to the first, as yet unaudited figures, total sales of CHF 573.0 million were achieved, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million).

Order Intake by Business Group
All three business groups were affected by the slump in demand in the second quarter of 2020 due to the COVID-19 pandemic. Despite the recovery in order intake in the third and fourth quarters of 2020, the weak second quarter was only partially offset.

The Business Group Machines & Systems was particularly hard hit by the effects of the pandemic, with a year-on-year decline of 35%. The Business Groups Components and After Sales each recorded a 24% reduction in order intake.*

Sales by Business Group
The exceptional market situation in 2020 gave rise to a significant decline in sales in all three business groups. Accordingly, reluctance to invest and deferred deliveries by customers caused sales in the Business Group Machines & Systems to decline by 24% compared to the previous year.

Due to COVID-19, a large number of spinning mills stopped production worldwide. This led to low demand for spare parts and wear parts, especially in the second and third quarters of 2020. Accordingly, compared to the previous year, sales in the Business Groups Components and After Sales fell by 24% and 27% respectively in the 2020 financial year.*

Sales by Region
With the exception of Turkey, all regions were affected by the low demand as a consequence of the COVID-19 pandemic.*

EBIT Margin and Net Profit
In the 2020 financial year, Rieter anticipates an EBIT margin of around -15% (2019: 11.2%) and net profit of around -16% of sales (2019: 6.9%). As of December 31, 2020, Rieter had liquid funds of exceeding CHF 280 million and unused credit lines in the mid three-digit million range.

First Half of 2021 Still Heavily Impacted by the COVID-19 Pandemic
Thanks to the improved capacity utilization, Rieter is planning short-time working in only a few areas in the first half of 2021. Nevertheless, Rieter expects sales in the first half of 2021 to be below the break-even point.*

Change to the Group Executive Committee
With effect from March 1, 2021, the Board of Directors of Rieter Holding Ltd. has appointed Roger Albrecht as Head of the Business Group Machines & Systems and a member of the Group Executive Committee.*

Annual General Meeting April 15, 2021
The 2021 Annual General Meeting of Rieter Holding Ltd. will take place in Winterthur on April 15, 2021.*

*See attached document for more information.

Reflecting the pandemic-related drop in worldwide vehicle production, Autoneum’s revenue in local currencies fell by –18.7% in 2020, although the second half of the year saw a significant market recovery. Group revenue in Swiss francs fell by –24.2% year-on-year to CHF 1 740.6 million. For the full year 2020, the EBIT margin will be around 1.5% and the free cash flow slightly over CHF 100 million.
At the Annual General Meeting on March 25, 2021, the Board of Directors will propose Liane Hirner and Oliver Streuli for election to the Board of Directors of Autoneum Holding. Peter Spuhler will not stand for re-election.

At 74.5 million, the number of light vehicles produced globally in 2020 was down –16.2% compared to the previous year, where around 89 million vehicles were manufactured. Autoneum’s revenue in local currencies decreased by –18.7% in 2020, pretty much in line with the negative market dynamics. The somewhat stronger decline of revenue compared to the market results from a lower share of Asia in Autoneum's total revenue. Impacted by the appreciation of the Swiss franc against the most important currencies for Autoneum, the consolidated revenue dropped in 2020 by –24.2% to CHF 1 740.6 million. The heterogeneous development of the first and second half of the year was characteristic for the pandemic-driven automotive year 2020. Worldwide lockdowns and production stoppages at vehicle manufacturers led to a market slump in the first six months and a corresponding loss in revenue for Autoneum. Thanks to the subsequent market recovery and catch-up effects in the second half of the year, revenue improved considerably compared to the first half of the year.

Revenue development in Asia and SAMEA region significantly better than market
While revenues in local currencies of the highest-volume Business Groups Europe and North America decreased by –25.6% and –19.3% respectively, reflecting the regional, pandemic-driven market development (Europe: –22.9%; North America: –20.1%), Business Group Asia almost held its prior-year level with an organic decline of only –2.1% in 2020 thanks to the strong upturn in automobile production in China in the second half of the year and despite the fact that the number of vehicles produced in Asia fell by –11.4%.*

Personnel changes to the Board of Directors
At the Annual General Meeting on March 25, 2021, the Board of Directors of Autoneum Holding will propose Liane Hirner and Oliver Streuli for election as new members of the Board of Directors.
Liane Hirner has been CFO and member of the Management Board of Vienna Insurance Group, based in Vienna, Austria, since 2018.*

Oliver Streuli, a Swiss national, has been CEO of PCS Holding, based in Frauenfeld (Canton Thurgau), Switzerland, since 2019.*

Peter Spuhler has been a member of the Board of Directors of Autoneum since 2011 and will not stand for re-election at the Annual General Meeting on March 25, 2021.*

*See attached document for further informationen

• The Bavarian Kelheim Fibres GmbH has become the first viscose fibre manufacturer worldwide to receive EMAS certification.

“Our aspiration is that our fibres offer an eco-friendly and high-performance alternative to synthetic materials”, says Craig Barker, CEO at Kelheim Fibres. “So, it’s not enough that our fibres are made from renewable resources and that they are fully biodegradable – our environmental awareness must include the whole production process and all that goes with it if we want to safeguard our credibility.

The EMAS certification proves that we take this responsibility seriously.” EMAS stands for “Eco Management and Audit Scheme” and is a standardised eco management certification system developed by the European Union. EMAS includes the globally applicable ISO 14001 standard and goes beyond its requirements by demanding more transparency and continuous improvement: Certified companies report in their annual EMAS Environmental Statement on their environmental goals and their progress in meeting them.

During the audit preceding the certification, the independent environmental auditor thoroughly investigated all departments of the company, from the production itself to the company canteen. He found no non-conformances and was impressed by the competence and the high sense of responsibility among Kelheim’s employees. In contrast to the EU Ecolabel and similar certifications, EMAS does not apply to individual products or services, but certifies the complete environmental performance of the company. This benefits not only the protection of the environment and climate, but also the improvement of a company’s ecoefficiency.

Craig Barker: “An efficient environmental management system ensures that economy and ecology go hand in hand – that gives us a decisive competitive edge.”

• The nonwoven and technical textiles industry has become the focus of the whole world during the pandemic process.
• Most countries carried out works for these sectors with their investments, production and innovations.

During the pandemic process, a new one is added every day to the works for the nonwoven and technical textiles sector, whose importance is increasing in line with the needs. Turkey has become a center of  technical textiles by showing that its accumulation in these field and power.

In the Turkish technical textiles sector, which has an export market of 107 billion dollars worldwide and continues to break its own export record every month, R&D and innovation investments continue without slowing down. Technical textile exports, which increased by 77 percent in last November compared to the same month of the previous year, increased by 55 percent in January - November period and reached 2.5 billion dollars. Thus, technical and smart textiles and production technologies both attracted more attention and gained more importance in line with the needs of the pandemic process.

HIGHTEX 2021 International Technical Textiles and Nonwoven Fair, which will be held at Tüyap Fair and Congress Center on 22-26 June 2021, will be the exhibition where the latest technologies and products for nonwoven, technical and smart textiles which have become more important during the pandemic period and have become the focus of the whole world. Especially the products and technologies produced for the pandemic will attract more attention at the exhibition. HIGHTEX 2021 Exhibition, which will gather its exhibitors and visitors under one roof, will also allow new collaborations. At the same time, the exhibition, where developing technologies and products are exhibited, will provide a great advantage in terms of the formation of new business ideas.
HIGHTEX 2021, the first and only exhibition in Turkey in its field are expected to sign a new record in terms of number of exhibitors and visitors. You can visit www.hightexfairs.com website for more information about HIGHTEX 2021, which is preparing to attract more attention and host people than ever before.