From the Sector

Stahl has achieved Zero Discharge of Hazardous Chemicals (ZDHC) MRSL 3.1 Gateway certification for 2,151 products in its portfolio. This achievement underlines Stahl’s ongoing commitment to the ZDHC mission of achieving high standards for sustainable chemical management.

ZDHC certification enables companies working in the footwear, apparel and accessories value chains to demonstrate their commitment to responsible chemical management, with the ultimate goal being zero discharge of hazardous chemicals. Level 3 certification represents the highest level of conformity with the ZDHC certification programme. To achieve this, Stahl’s formulated chemical products and raw materials were verified and tested against ZDHC’s latest Manufacturing Restricted Substances List (MRSL 3.1) by Eurofins | Chem-MAP®. The Chem-MAP® programme was also used to audit the chemical management and stewardship processes at three of Stahl’s manufacturing sites.

Avery Dennison, a leader in materials science and digital identifications solutions, has completed a project with NRVLD, a community-based agency comprising artists, technologists and media personalities who are passionate about disruptive innovation.

Avery Dennison created limited edition augmented reality T-shirts worn by the NRVLD Executive Team during ‘NRVLD’, an immersive event held during Art Basel Miami Beach in December 2023.

The 30 T-shirts were digitally connected via heat transfers featuring a QR code and image recognition. Visitors were transported to an immersive artwork metaverse, built by ARkivist. In addition to the AR experience, each garment was personalized with the wearer's contact details embedded in the NFC woven patch on the chest, providing a connection point for guests throughout the event. Both connected garment experiences were powered by Avery Dennison’s atma.io connected product cloud.

Avery Dennison will be showcasing this project at NRF 2024: Retail’s Big Show, from January 14-16 at the Javits Convention Center in New York. The connected T-shirts will feature alongside a host of apparel digital solutions for supply chain visibility, product tracking, and consumer engagement.

Michael Colarossi, vice president, innovation, product line management and sustainability, Apparel Solutions, Avery Dennison comments: “The trajectory of consumer experiences unmistakably leans towards digital, and brands are actively seeking innovative methods to engage consumers by merging traditional craftsmanship with digital creativity. In this scenario, AR acted as the conduit, and Avery Dennison's connected garment technology and on-garment Embelex branding turned that vision into tangible reality."

Pavan Bahl, founder of Bellwether Culture and co-founder NRVLD, comments: "In the Web3 sphere, blockchain technology enables ownership of digital goods and identity. Our collaboration with Avery Dennison showcases the potential of bridging this gap, illustrating the exciting possibilities in this space."

The report details sustainability efforts at its Boennigheim headquarters and targets for 2024. Hohenstein has replaced previous environmental guidelines with strategic development in accordance with Environmental, Social and Corporate Governance (ESG) and adopted a sustainability roadmap for the future.

Hohenstein has been implementing environmental and social measures for decades. As the first neutral assessment of these measures in 2019, Hohenstein participated in the ECOfit programme in Baden-Württemberg, Germany. A regular external assessment is to be introduced in 2024.

• Environmental: Overall, energy consumption was actively reduced, and renewable energy use promoted. Hohenstein also collected rail and air travel data to be used in CO2 accounting in 2024.
• Social: Hohenstein actively involved its employees in sustainability activities based on a survey and internal education. In future, Hohenstein will improve the ratio of female managers and implement a training campaign on the company values for employees.
• Governance: Hohenstein management has prioritized good communication through regular colloquia for employees and access to human resources consultation. They intend to intensify the dialogue with employees through further events.

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

The long-time sales manager is leaving the company at the end of this year. Frank Neumann joined Dibella in 1999 as a sales representative in the field service and was most recently responsible as sales manager for the areas of northern Germany and Berlin, as well as for exports, particularly for Scandinavia and Eastern Europe. He played a leading role in developing cruise companies as a new customer base for Dibella.

In addition, he was one of the co-founders of MaxTex, an international association that aims to ensure sustainable trade along the entire value chain, together with the then Dibella Managing Director Ralf Hellmann.

As an authorised signatory and member of the management board, Frank Neumann made a significant contribution to the company's success. "With Frank Neumann, we are saying goodbye to a valued colleague and proven expert. We would like to thank Mr Neumann for his extraordinary commitment to Dibella and wish him all the best for the future," says Stefan Tenbusch, Managing Director at Dibella.

With its new sustainability label Autoneum Blue, Autoneum combines the use of recycled materials with protecting the oceans and social responsibility. Autoneum Blue is a continuation of the LABEL blue by Borgers®, which was originally launched by Borgers Automotive. Following the acquisition of the German automotive supplier in April 2023, Autoneum has now fully integrated the label into its sustainable product portfolio.

Marine pollution has reached alarming levels in recent decades, with plastic contamination posing one of the most harmful threats to the health of the world’s largest ecosystem. In light of ever-stricter legal requirements for the environmental performance of vehicles, especially regarding the recycled content of components and their end-of-life recyclability, the reduction and recycling of plastics is also one of the key challenges for the automotive industry. Autoneum Pure, the Company’s sustainability label for technologies with an excellent sustainability performance throughout the product life cycle, is already successfully helping customers to tackle these challenges. With Autoneum Blue, Autoneum is now expanding its sustainable product portfolio with a label for components that combine the use of recycled material with protecting the oceans and social responsibility.

In order to qualify for the Autoneum Blue label, components must be based on materials that consist of at least 30% recycled PET that was collected from coastal areas within a 50-kilometer range of the water. These credentials mean the products make an important contribution to preventing plastic pollution in the oceans. In addition, the process of collecting the PET bottles must be socially respon-sible and comply with human rights, and traceable procurement of the bottle flakes must be guaran-teed. Autoneum Blue thus complements the Company’s strategic target to continuously reduce water consumption in all areas of its operations with an additional focus on preventing plastic pollution of the oceans.

Autoneum currently offers selected wheelhouse outer liners, needlepunch carpets and trunk side trim under the Blue label. In principle, however, the label could be extended to any product based on Autoneum technologies that feature recycled polyester fibers. As an addition to Autoneum’s existing fully recyclable monomaterial polyester constructions, which are characterized by waste-free production and have a significantly lower carbon footprint compared to products made from virgin fibers, Autoneum Blue presents another example of the Company’s ongoing efforts and continuous strides towards a sustainable circular economy.

On December 7th and 8th, Bangladesh Apparel Exchange (BAE) in partnership with Fashion for Good, facilitated the “Chemical Recycling Technologies: Manufacturing Markets Gateway”, in Bangladesh. Fashion for Good, the Amsterdam based global platform for innovation, along with two disruptive technology start-ups focused on textile-to-textile chemical recycling, Circ and Infinited Fiber Company, were the key stakeholders in this initiative.

The two-day visit leveraged Bangladesh's status as a major garment production hub, exploring the potential of chemical recycling technologies to enhance environmental sustainability. Emphasizing the importance of circularity, the event aimed to spread awareness about current disruptive innovations that could transform the industry's approach to waste and resource management, setting an example for future sustainable practices. It focuses on integrating these technologies within the local manufacturing landscape, securing feedstock partnerships, and developing a value chain for recycled apparel materials.

Denim Asia Limited, Knit Asia Limited, Progress Apparels Limited, Ananta BD, Reverse Resources, and the Bangladesh Garment Manufacturers and Exporters Association (BGMEA) played pivotal roles in this initiative. Knit Asia Ltd, notably acclaimed for their commitment to sustainable practices, along with Denim Asia, associated with the sustainable brand Noize Jeans, showcased their commitment to sustainable manufacturing processes.
Progress Apparels Limited, a ready-made garment producer and part of PDS Limited demonstrated its advanced sustainable production facilities. Reverse Resources and the BGMEA hosted an intimate “Meet and Greet Networking Session”, to boost awareness about the technologies in the industry.

Mr. Mostafiz Uddin, Founder and CEO of Bangladesh Apparel Exchange, emphasized the significance of this event for the wider Bangladeshi textile industry, " Bangladesh has the biggest manufacturing sector in South Asia and this tour marks a critical step towards a circular fashion ecosystem, also how can the fashion industry become more sustainable in Bangladesh. It's not just an event; it's part of a larger movement to incorporate innovative recycling, Sustainable Fashion technologies and establish global partnerships for a sustainable fashion industry."

Featuring interactive sessions, factory visits, and knowledge sharing, this initiative offered a platform for fostering collaborations between manufacturers and technology innovators.

Bangladesh Apparel Exchange and Fashion for Good are optimistic about a future where Bangladesh leads in sustainable and circular apparel manufacturing.

• Bernhard Jucker will not stand for re-election as Chairman of the Board of Directors at the Annual General Meeting on April 17, 2024 due to reaching the age limit
• Thomas Oetterli will be proposed as the new Chairman of the Board of Directors at the 2024 Annual General Meeting and will continue in his role as CEO of the Rieter Group
• Roger Baillod will be named as Lead Independent Director
• Jennifer Maag will be proposed for election as a new member of the Board of Directors

Bernhard Jucker will not stand for re-election as Chairman of the Board of Directors at the next Annual General Meeting on April 17, 2024, having reached the age limit. The Board of Directors would like to thank Bernhard Jucker for his outstanding and valuable commitment. During his term of office, he has successfully developed the company through acquisitions and optimization of the sites.

The Board of Directors of Rieter Holding AG proposes to the shareholders the election of Thomas Oetterli as the new Chairman of the Board. He will continue in his role as CEO of the Rieter Group. The dual mandate is an interim measure to ensure the sustainable implementation of the “Next Level” performance program. The Board of Directors is convinced that Thomas Oetterli has the qualifications and the ideal background experience as the future Chairman of Rieter Holding Ltd.

Roger Baillod, member of the Board of Directors since 2016 and Vice Chairman since 2022, will be named as Lead Independent Director. Together with the Board of Directors, Roger Baillod will use his many years of experience to continue to ensure good corporate governance.

Jennifer Maag will be proposed for election to the Board of Directors at the Annual General Meeting on April 17, 2024. Ms. Maag, native-born in the USA, has Swiss and German citizenship and holds a Bachelor’s degree in Economics from the University of California, Berkeley (USA). Ms. Maag is currently a member of the Board of Directors of Kardex Holding AG, Zurich, Weidmann Holding AG, Rapperswil, VT5 Acquisition Company AG, Pfäffikon (SZ) and Nova Property Fund Management AG, Pfäffikon (SZ). In 1999, Jennifer Maag founded Capital Concepts International AG, Zurich (Switzerland), a mergers and acquisitions consulting firm, where she remains as managing partner. From 1996 to 1999, she was a senior manager in the corporate finance department of KPMG AG in Zurich. She previously worked in auditing at Deloitte in Munich (Germany) and Zurich, during which time she completed her education as a Certified Public Accountant (CPA).

Autoneum’s sustainable, textile and lightweight Propylat technology reduces both interior and exterior noise of vehicles. Propylat was originally developed by Borgers Automotive, which was acquired by Autoneum in April 2023. The versatile technology is characterized by a flexible material composition of natural and synthetic fibers with a high recycled content and contributes to significant waste reduction thanks to its complete vertical integration. In addition, the fully recyclable technology variant Propylat PET is now part of the sustainability label Autoneum Pure.

The ongoing electrification of mobility as well as increasingly strict regulatory requirements for vehicle performance in terms of sustainability and acoustics are presenting new challenges to car manufacturers worldwide. With Propylat, Autoneum now offers another lightweight, fiber-based and versatile technology whose sound-insulating and -absorbing properties as well as high content of recycled materials help customers address these challenges. Propylat-based products not only contribute to reducing pass-by noise and improving driver comfort, but they are also up to 50 percent lighter than equivalent plastic alternatives; this results in a lower vehicle weight and, consequently, less fuel and energy consumption as well as lower CO2 emissions.

Autoneum's innovative Propylat technology consists of a mixture of recycled synthetic and natural fibers – the latter include cotton, jute, flax or hemp, for example – that are consolidated using thermoplastic binding fibers without adding any further chemical binders. Thanks to the flexible fiber composition and the variable density and thickness of the porous material, the properties of the respective Propylat variant, for example with regards to acoustic performance, can be tailored to individual customer requirements. This allows for a versatile application of the technology in a variety of interior and exterior components such as wheelhouse outer liners, trunk trim, underbody systems and carpets. For instance, Propylat-based wheelhouse outer liners significantly reduce rolling noise both inside and outside the vehicle while at the same time offering optimum protection against stone chipping and spray water.

In terms of sustainability, Propylat always contains a high proportion of recycled fibers – up to 100% in some variants – and can be manufactured with zero waste. Thanks to the full vertical integration of Propylat and Autoneum’s extensive expertise in recycling processes, the technology also contributes to a further significant reduction in production waste. Moreover, the Propylat PET technology variant, which consists of 100% PET, of which up to 70% are recycled fibers, is fully recyclable at the end of product life. For this reason, Propylat PET has been selected for Autoneum Pure – the Company’s sustainability label for technologies with excellent environmental performance throughout the product life cycle – where it will replace the current Mono-Liner technology going forward.

Propylat-based components are currently available in Europe, North America and China.

Rieter has opened its first Repair Services station in Tashkent, Uzbekistan, on December 1, 2023. It will enable both faster repair turnaround and minimum production downtime.

The station’s capabilities cover both mechanical and electronic repairs for all types of Rieter machines, including spinning and winding. In addition, the repair station has a warehouse where critical parts, such as control units, sensors and drives are stocked to ensure quick turnaround times for repairs. The new service station will operate in collaboration with Textile Service Solutions.

Rieter’s global Repair Services network comprises 25 repair stations in 19 countries. Each repair station is fully equipped with the testing and calibration equipment required to provide the highest quality repairs. Certified Rieter repair services engineers perform both on-site and in-workshop repairs, using original Rieter repair components and spare parts. The new Repair Services station in Tashkent complements Rieter’s presence in Uzbekistan, providing state-of-the-art repairs and sustainable solutions combined with dedicated support to local customers.