From the Sector

With its new sustainability label Autoneum Blue, Autoneum combines the use of recycled materials with protecting the oceans and social responsibility. Autoneum Blue is a continuation of the LABEL blue by Borgers®, which was originally launched by Borgers Automotive. Following the acquisition of the German automotive supplier in April 2023, Autoneum has now fully integrated the label into its sustainable product portfolio.

Marine pollution has reached alarming levels in recent decades, with plastic contamination posing one of the most harmful threats to the health of the world’s largest ecosystem. In light of ever-stricter legal requirements for the environmental performance of vehicles, especially regarding the recycled content of components and their end-of-life recyclability, the reduction and recycling of plastics is also one of the key challenges for the automotive industry. Autoneum Pure, the Company’s sustainability label for technologies with an excellent sustainability performance throughout the product life cycle, is already successfully helping customers to tackle these challenges. With Autoneum Blue, Autoneum is now expanding its sustainable product portfolio with a label for components that combine the use of recycled material with protecting the oceans and social responsibility.

In order to qualify for the Autoneum Blue label, components must be based on materials that consist of at least 30% recycled PET that was collected from coastal areas within a 50-kilometer range of the water. These credentials mean the products make an important contribution to preventing plastic pollution in the oceans. In addition, the process of collecting the PET bottles must be socially respon-sible and comply with human rights, and traceable procurement of the bottle flakes must be guaran-teed. Autoneum Blue thus complements the Company’s strategic target to continuously reduce water consumption in all areas of its operations with an additional focus on preventing plastic pollution of the oceans.

Autoneum currently offers selected wheelhouse outer liners, needlepunch carpets and trunk side trim under the Blue label. In principle, however, the label could be extended to any product based on Autoneum technologies that feature recycled polyester fibers. As an addition to Autoneum’s existing fully recyclable monomaterial polyester constructions, which are characterized by waste-free production and have a significantly lower carbon footprint compared to products made from virgin fibers, Autoneum Blue presents another example of the Company’s ongoing efforts and continuous strides towards a sustainable circular economy.

A new cold chamber at its headquarters in Winterthur, Switzerland, enables Autoneum to optimize existing technologies as well as simulation and engineering services in vehicle thermal management and to adapt them to the changing thermal requirements of electric vehicles

The absence of heat from the internal combustion engine in electric vehicles as well as the impact of ambient temperature on the performance and lifetime of lithium-ion batteries are changing the requirements for vehicle thermal management. In addition, the energy from the battery is used not only to power the e-motor but also to thermally manage the battery itself and to warm and cool the car cabin by means of the heating, ventilation and air conditioning system. To increase the thermal comfort of the occupants and at the same time ensure optimum battery performance, save energy and thus increase the car’s range, manufacturers are placing increasing emphasis on efficient overall thermal management of the vehicle.

The chamber enables to test both occupants’ subjective perception of thermal comfort and the performance of components and entire vehicles under controlled temperature conditions of up to minus 20 degrees Celsius. It is thus a valuable addition to the existing testing and bench-marking facilities at the Company’s global research and development centers. The tests conducted in the chamber show how existing insulating components such as under battery shields, carpets and interior trim need to be optimized to further enhance the thermal management of the vehicle battery and cabin. The tests also provide valuable insights regarding the development and optimization of heated surfaces such as floor mats and door trim panels to improve thermal performance and driver comfort of electric vehicles.

Autoneum carpet systems already meet high standards of sustainable mobility due to their high content of recycled fibers. Thanks to an alternative backcoating (ABC) process, Autoneum carpets are now becoming even more environmentally friendly: By replacing the latex commonly used in standard backcoatings with thermoplastic material, the recyclability of carpets at the end of product life is further  improved. In addition, the innovative manufacturing process greatly reduces water and energy consumption and thus CO2 emissions in production.

Lightweight, textile-based carpet technologies such as Di-Light or Relive-1 significantly improve the environmental performance of carpets. For example, Di-Light-based carpets consist of up to 97% recycled PET; aside from that, they are around 20% lighter than conventional needlepunch carpets, thus contributing to lower fuel consumption and CO2 emissions from vehicles. In addition, Autoneum needlepunch carpets are now even more sustainable thanks to the innovative ABC process, which uses a thermoplastic adhesive instead of latex in the backcoating: Unlike latex, thermoplastic adhesives can be heated and melted down together with the carpet components made of pure PET at the end of the product life cycle, which facilitates recycling considerably. Furthermore, since the fibers of the thermoplastic mono-material are easier to open, carpet cut-outs can be reclaimed more easily, thereby reducing the consumption of natural resources as well as waste volumes and thus CO2 emissions. The environmental  performance of Autoneum’s needlepunch carpets, which already contain a high proportion of recycled PET, is thus further improved.

Moreover, backcoatings without latex improve the sustainability of carpets not only thanks to better recyclability at the end of the product life cycle. Since the application of the thermoplastic adhesive using the innovative ABC process consumes significantly less energy than the production of latexbased backcoatings and does not require any water at all, the environmental impact can already be minimized in the manufacturing process. Additionally, thermoplastic adhesives developed in-house by Autoneum will open up new possibilities in the future for adapting backcoatings to the individual needs of vehicle manufacturers in terms of their acoustic performance, stiffness and abrasion resistance.

Models from various customers in Europe and North America are already equipped with latex-free needlepunch carpets from Autoneum. In the near future, backcoatings with thermoplastic adhesives will also be used for Autoneum’s tufted carpets. Production of the new, even more sustainable generation of tufted carpets is scheduled to start in early 2022.

A wide range of new technologies will be demonstrated by Vandewiele at the ITMA 2019 textile machinery show in Barcelona from June 20-26, including the latest RCE2+ digital carpet weaving machine.

All Vandewiele technologies are now being equipped for machine-to-machine interaction and learning, as part of the company’s comprehensive TEXconnect programme.

Meeting new industry needs
As a leader in complete carpet manufacturing systems – including BCF extrusion lines, heat setting systems and carpet weaving and tufting machines – Vandewiele has rapidly responded to the evolving needs of the textile industry for smaller and customised production runs, the most challenging of designs, and faster and more sustainable manufacturing.

The company’s sensors, software programmes and servers have become increasingly sophisticated as part of the TEXconnect program, and the real-time data from different machines – across connected manufacturing sites and across different countries and even continents – can be collected and shared. Digital models of both machines and production processes can be created and analysed for the optimisation of production settings, to vastly improve scheduling and planning and also make considerable savings in raw materials and energy consumption.

Virtual and remote control now allows for the Big Data analysis that is propelling the industry forward and will pave the way for AI applications. For carpet manufacturers, all of this is leading to the creation of truly Smart Factories.

RCE2 carpet weaving
The new RCE2+ Rug and Carpet Expert weaving machine is a truly digital workhorse, with all yarns continuously controlled and measured and the difficult bobbin changes of the past completely eliminated. This is as a result of Vandewiele’s latest Fast Creel, with the feed and tension of each pile yarn controlled by individual servomotors.

The pile yarns are now fed directly into the machine without having to pass pile-stop motions, to both increase efficiency and eliminate any waste yarns, while achieving previously unreachable industrial speeds.

The filling enters the machine smoothly via the latest IRO X3 winders, heavy duty filling brakes with multi lamellas, an active yarn recuperator and a high speed weft mixer, where again, all tensions are set electronically. Vandewiele’s servo-driven heddle frames (Smart Frames) are meanwhile already well proven in the industry.

TEXconnect further provides readily-available data on all yarn consumption, tension and threading, and then will supply the predictive maintenance that is paving the way to self-learning carpet weaving machines.

All of this would be unnecessary, if it didn’t result in allowing manufacturers to make the highest quality carpets at the most economic prices ever, with savings on the highest-bulk pile yarns from the Vandewiele extrusion lines, reduced waste yarns in the creel and industrial production speeds that have never before been attained.

•    New, sustainable, ready-to-use solutions for plastic auto parts to support China’s electric vehicle boom
•    Stronger, softer nylon polyamide fibers plus fast processing for clothes, carpets & industrial applications
•    AddWorks blends lower total cost of ownership & reduce production complexity while enhancing performance

Muttenz, May 3, 2018 – Clariant, a world leader in specialty chemicals, introduced new additive solutions for plastics materials at Chinaplas 2018.

“Our innovations focus on higher performance at better convenience for a sustainable future,” says Stephan Lynen, Head of Clariant BU Additives. “At Chinaplas 2018 we demonstrated our technical and market capabilities around the theme of e-mobility. The immense changes in mobility call for lighter, safer and smarter vehicles. We offer new additive solutions, such as AddWorks, and technical capabilities to respond to this demand. We are accompanying this with a series of investments such as new production facilities in China.”

Clariant’s new AddWorks solutions – AddWorksATR 146, AddWorks LXR 568 and AddWorks TFB 117 – are specifically aimed at improving performance and efficiency of plastics materials for compounders, polymer and fiber producers in China’s major plastics manufacturing segments. All three solutions are part of the globally available portfolio.

The full AddWorks portfolio consists of differentiated market-specific synergistic additive blends that streamline production processes and create value for customers while enhancing performance. Each solution is customized to specific market needs, underlined by broader considerations such as emission reduction, and less energy and resource usage.

Sustainability and performance for the world’s largest auto market
To support the significant investment in electric vehicles in China, Clariant launched two additive innovations that improve the lifetime of lightweight automotive parts and under-the-hood applications and reduce VOC emissions in an easy to use single solution.

AddWorks ATR 146 is a new low dosage, sulfur-free heat and light stabilizer for filled polypropylene (TPO) compounds used in interior applications. Its exceptional heat and light stability and long term color retention offers the automotive industry unmatched performance. It shows no surface cracking after 700 hours at 150°C, which enables dashboards, instrument panels, door panels and pillars to maintain their aesthetics longer than with traditional stabilizers. It also contributes to reducing blooming and VOC emissions, supporting the common effort to make automotive interiors healthier and odorless.

AddWorks LXR 568 is a high performance processing stabilizer that helps to prevent plastic resins, especially polyolefins, from degradation at high processing temperatures. For the automotive industry, this reduces the tendency of injection molded polypropylene interior car parts to turn brittle during heat exposure, enabling them to maintain a defect-free surface. It also has low migration and low fogging that support healthier in-cab environments.

AddWorks LXR 568 combines outstanding color and melt flow protection with good resistance to hydrolysis and high thermal stability. This makes it ideal for interior and under-the-hood powertrains and wider application areas such as packaging films. It is available in free-flowing pills and micro-pills which are easy and convenient to use.

Softer, stronger polyamide fibers for clothes, carpets and industrial applications
Within the next three years, China is expected to account for 40% of the world’s nylon production and more than 30% of the nylon resin consumed globally[1]. The new AddWorks TFB 117 offers a number of benefits to help stabilize and smoothen fiber production processes, protect color, and improve heat stability and mechanical properties of fibers. AddWorks TFB 117 ensures smooth spinnability with less filaments breakage, even at low processing temperatures and at high speed spinning up to 5,500 m/min.

Martin P. J. John, Head of BL Performance Additives at Clariant, comments: “AddWorks solutions are an ideal fit with China’s priority of achieving more sustainable production. They save time and reduce complexity along the production process, with easy to use formats that reduce health risk and chemical waste. Our new state-of-the-art production facility in Zhenjiang, China, which opens later this year, is dedicated to the manufacturing of AddWorks to deliver innovative solutions tailored to the needs of the market. Made for China in China.

In addition to AddWorks, Clariant presented Exolit® OP 1400, a highly stable non-halogenated flame retardant enhancing safety during the charging process. It also provides outstanding thermal stability for under the hood applications. Exolit OP 1400 has been awarded the Clariant EcoTain® label for outstanding sustainability and performance.  

Clariant also introduced two ranges of performance waxes that smoothen the production of automotive plastics for under the hood applications, Licowax® and Licocare® RBW. The recently launched Licocare RBW is a series of multi-purpose additives based on crude rice bran wax. They offer better shaping flexibility, better mechanical properties and enhanced surface finish, which results in a reduced rejection rate and a more effective dosage.