From the Sector

• Partnership with green power producer Enery and Energie Steiermark realizes construction of a photovoltaic plant with 5.5 MWpeak capacity
• Strategic investments in renewables boost energy independence and reduce carbon footprint

The Lenzing Group has signed an electricity supply contract with green power producer Enery and Energie Steiermark to finance a photovoltaic plant in the Deutschlandsberg region (Styria). The electricity generated will supply the fiber and pulp plant at the Lenzing site after commissioning from the fourth quarter of 2023. The electricity supply contract is limited to 20 years.

The plant’s output will amount to 5.5 MWpeak. This corresponds to the average annual electricity demand of more than 1,700 households. Several photovoltaic systems are already being installed at the Lenzing site, including the largest ground-mounted plant in the province of Upper Austria, whose commissioning is imminent.

In 2019, Lenzing became the first fiber manufacturer to set a target to reduce its carbon emissions by 50 percent by 2030 and to be climate neutral by 2050. This carbon reduction target has been confirmed by the Science Based Targets Initiative. Lenzing is also currently investing in reducing carbon emissions at other sites worldwide. Only recently, the Lenzing Group announced that its Indonesian site will also be relying on green energy in the future.

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical company, announced its commitment to science-based targets by the Science Based Targets initiative (SBTi) to help drive its ambitious sustainability programs. The company will also participate in the SBTi Expert Advisory Group for the chemicals industry.

SBTi is a collaboration between CDP, the United Nations Global Compact, the World Resources Institute, and the World Wide Fund for Nature to help businesses set emissions reduction targets based on the most recent climate science. IVL has committed to science-based targets under its purpose of “Reimagining chemistry together to create a better world” which aims to reduce global warming in line with the 1.5°C Paris Climate Agreement.

Under its Vision 2030 ambition, Indorama Ventures aims to build on its global industry leadership in sustainability, including by reducing GHG intensity by 30% and increasing renewable electricity consumption to 25%. Green projects are helping the company to achieve its operational efficiency targets, increase its use of renewable energy (especially renewable electricity – both onsite generation and offsite procurement through power purchase agreements), implement new decarbonization technologies including carbon capture, introduce bio-feedstock to its petrochemical value chain, and expand its PET recycling capability.

To meet its targets, IVL recognizes the importance of collaboration between the public and private sectors to decarbonize its operations through a variety of strategies. The established targets help its customers and suppliers to achieve their own sustainability goals, particularly their science-based targets.

Yash Lohia, Chairman of ESG Council at Indorama Ventures, said, "We are pleased to make our sustainability commitment more practical and measurable through science-based targets. We are dedicated to finding new technologies that can transform our operations and products towards net-zero. The efforts are not only for our sustainable business but also to support our customers and suppliers to achieve their own sustainability goals."

IFFAC (Impact Fund for African Creatives) has revealed plans which will revolutionise West African textile and garment production at one stroke. The fund is converting a partially disused textile mill in the region into a hi-tech centre for processing local cotton and recycling waste fabric, to produce both fabric for further processing and new clothes. The mill will be equipped with modern equipment, all sustainably powered by hydroelectricity from the nearby Volta Dam.

West Africa grows about 6% of the world’s cotton but only a tiny fraction of that crop is processed on the continent, the vast majority being shipped thousands of miles to Asia before being shipped back again as finished or part-finished fabrics. The mill project will end the continent’s reliance on such an unsustainable practice with all the obvious financial and environmental benefits.

As well as producing fabric from sustainably grown virgin cotton, a joint venture with Shandong-based WOL Textiles Ltd., a privately owned plant that has long supplied the African market, the mill will be home to a state-of-the-art shredding and recycling facility, a joint venture between IFFAC and the Dutch Circularity B.V. CEO Han Hamers of Circularity B.V. in The Netherlands, has been involved in the production of 100% circular knit and woven articles.

The mill project is expected to create over a thousand jobs. The surrounding area already boasts a significant number of experienced textile workers ready to be retrained on the new equipment. While the majority of the products created will be sold within the region, all processes will confirm to new EU Supply Chain Law to allow for the possibility of export.  

Output is forecast at six million pieces of finished clothing and twenty-five million metres of spun and woven cloth per year. In total, thirty million US$ of investment will be made in the site with operations ready to begin next year (2023).

Based on the good business development in all four Business Units as well as the mostly successful passing on of increased costs for raw materials, energy and transport to customers, the Board of Management of SGL Carbon SE expects to exceed the given guidance for the fiscal year 2022. Accordingly, SGL Carbon SE is increasing its sales and earnings guidance for fiscal year 2022.

The Company expects to exceed the upper end of the stated range of its Group EBITDApre (earnings before interest, taxes and depreciation adjusted by non-recurring items and one-time effects) guidance for the fiscal year 2022 of EUR 110 - 130 million and is raising its EBITDApre guidance for 2022 to EUR 130 - 150 million. Correspondingly, EBITpre1 (earnings before interest and tax adjusted by non-recurring items and one-time effects) is now forecasted to be between EUR 70 - 90 million (previously: EUR 50 - 70 million). The sales guidance is also raised to around EUR 1.1 billion for the current fiscal year, originally expected to be at the level of the previous year (EUR 1,007.0 million).

In line with the development of earnings, the forecast for return on capital employed (ROCE) of originally 5% - 7% is raised to 7% - 9%. The expectations for free cash flow remain unaffected by the forecast increase. Free cash flow is still expected to be significantly lower in 2022 than in the previous year (previous year: EUR 111.5 million).

The new forecast for fiscal 2022 has been drawn up on the basis of the prevailing market environment and assumes no deterioration in conditions, in particular due to the war in Ukraine and its consequences for the global economy. In particular, it is assumed that sufficient electricity and gas will be available and production lines will remain in operation. The communicated medium-term targets up to 2025 remain unaffected by the forecast adjustment.

SGL Carbon will publish its 2022 half-year figures as planned on August 4, 2022.

Over 400 employees work hard every day to improve the environmental performance of Radici Yarn’s site. Through teamwork and continuous improvement in energy efficiency, Radici Yarn has obtained ISO 50001 Energy Management Systems certification, which attests to the organization’s commitment to contain and progressively reduce energy consumption.

Radici Yarn, one of the companies in the RadiciGroup Advanced Textile Solutions Business Area, is engaged in the production and sale of polyamide 6 polymer, PA6 and PA66 continuous filament and staple yarn, and other synthetic fibres, including products made of recycled or bio-based materials.

All the processes - polymerization and spinning (Villa d'Ogna plant), as well as warping and draw-warping (Ardesio plant) - are run under constant monitoring with the goal of achieving maximum energy efficiency and lower consumption. Both sites are powered by two hydroelectric power plants owned by Geogreen, a RadiciGroup partner and energy supplier. The share of energy consumption from renewable sources and reduced environmental impact (natural gas) sources  is constantly increasing.

The energy issue has always been a priority for Radici Yarn, whose products serve numerous sectors, including automotive, clothing and furnishings.

"Already at the beginning of the 1990s, Radici Yarn started investing in cogeneration, the simultaneous production of electricity and steam,” pointed out Laura Ravasio, energy manager of Radici Yarn SpA. “We have recently started up an advanced trigeneration plant – a highly efficient system that produces not only electricity and steam, but also chilled water for our production processes. One of the first results recorded in 2021 was a 30% reduction in water consumption. Thus, ISO 50001 certification seemed like the next logical step to take in formalizing a long-term approach to energy.”

The ISO 50001 certification, which is voluntary and valid for a period of three years, was added to the ISO 14001 Environmental and ISO 9001 Quality Management system certifications previously achieved by Radici Yarn.

Indorama Ventures Public Company Limited issued a THB 10 billion triple-tranche Sustainability-Linked Bond, showcasing the company’s long-standing commitment to sustainable growth. It is the largest SLB issued in Thailand and the first offered to both institutions and high-net-worth investors.

The bond is part of IVL’s financing strategy across a range of instruments linked to the company’s sustainability targets. It is aligned with internationally accepted standards including International Capital Markets Association’s (ICMA) Sustainability-Linked Bond Principles and the Loan Market Association’s (LMA) Sustainability Linked Loan Principles.

The SLB is linked to IVL’s performance of reducing GHG emissions intensity by 10% by 2025 (from a 2020 base), increasing recycling of PET bale input to 750,000 tons per year by 2025, and achieving 25% renewable electricity consumption in 2030.

The triple-tranche structure includes 5-, 7-, and 10.5-year tenors, offering coupons of 2.48%, 3.00% and 3.60% per year respectively, targeting asset managers, commercial banks, insurance companies, cooperatives and high-net-worth individuals. With the orderbook peaking at over THB 17.8 billion due to strong interest in the sustainability-linked instrument, oversubscription was around 3x over the planned issuance amount of THB 6 billion with a green shoe option of THB 4 billion. In view of the strong orderbook from the investors, the company decided to exercise the green shoe option and increased the issuance to THB 10 billion, setting a new benchmark as the largest SLB transaction in Thailand. IVL appointed Bangkok Bank, Kasikorn Bank, Krungthai Bank, Siam Commercial Bank, and The Hongkong and Shanghai Banking Corporation Limited, Bangkok Branch as arrangers and bookrunners for the transaction.

On 23 September 2021, the bond was assigned an AA- rating and a “stable” outlook by TRIS Rating following a strong recovery of petrochemicals and derivatives and IVL’s growing profitability.

Under the terms, all tranches must purchase Energy Attribute Certificates (EAC) or voluntary carbon offsets in the event of failure to meet the sustainability performance targets (SPT). The testing dates for tenors with a maturity of 5 and 7 years are 31 December 2025, and 31 December 2030 for the 10.5-year tenor. SPT performance will be independently verified upon the testing dates.Proceeds for the issuance will be used to finance IVL’s corporate working capital and refinance existing debt.

In recent years, IVL secured loans linked to improvements in the company’s sustainability performance as a global leader in environmental, social and governance (ESG) integration. These included Thailand’s first Green Loan of USD 200 million and EUR 200 million from Japan’s Mizuho Bank, Thailand’s first cross-border Sustainability-Linked Ninja Loan worth USD 225 million from 16 institutions in Japan and a Blue Loan of USD 300 million arranged by International Finance Corporation and funded by Asian Development Bank and DEG.

Marabu is one of the first ink manufacturers to achieve climate neutrality. All Marabu Business Units will, where possible, make a specific contribution to achieve the 17 United Nations Sustainable Development Goals (SDGs) with PROJECT GREEN and therefore participate in the Green Deal.

"We are safeguarding the future of the next generations and are proud that we have managed to be a climate neutral company from July 2021 with the Tamm and Bietigheim sites. All our products, whether printing inks or creative colours, are climate neutral, too," explains York Boeder, CEO Executive Committee. "Our so-called PROJECT GREEN combines all measures that are taking us on our journey to climate neutrality. Climate protection is a particular concern for us, to which we have made a binding commitment within the scope of an extensive sustainability strategy. In accordance with our Marabu Green Deal, we avoid and reduce emissions wherever possible, e. g. by using green electricity, energy-saving schemes, mobility concepts or environmentally friendly materials. We offset all unavoidable CO2 emissions by supporting internationally certified climate protection projects. We are continually implementing measures to improve our carbon footprint and update them annually to make their success measurable. We have therefore set ourselves the active goal of reducing our CO2 emissions by another 25 % by 2030."

For decades, Marabu has invested in the research and development of safe production processes, environmentally friendly products, and clean technologies with the aim of preserving the natural environment. Marabu has worked with Climate Partner to analyse all the CO2 emissions from the sites in Tamm and Bietigheim and determine its carbon footprint. Including all product-related factors such as raw materials and logistics, Marabu currently generates approx. 18,500 tons of unavoidable CO2 emissions. This value is the positive result of a number of climate-friendly measures pursued by Marabu, such as the early switch to green electricity in 2007.

Marabu's main activities to avoid and reduce CO2 emissions:

• Energy - Switching to green electricity from hydropower
• Mobility - Migration of the company's vehicles to electric and hybrid cars as well as in e-charging stations
• Production - Use of renewable energies and resource-efficient production processes
• Raw materials - Replacing critical substances with environmentally friendly alternatives for new and existing products
• Transporting - Climate-neutral freight carriers and lower-emission transport methods like shipping or road transport replace air freight wherever possible
• Product technology - Modern, low-emission products

The Lenzing Group scored a total of 30.5 points (4 points more compared to last year) and received for the first time a leading dark green shirt, the highest Hot Button ranking category. Lenzing once again convinced the non-profit organization Canopy with its innovative vision with regard to circular economy and REFIBRA™ technology, its high level of transparency in wood and pulp sourcing, as well as its active contribution towards protecting forests and preserving biodiversity.

In this widely recognized ranking, Canopy grades the world’s 31 largest producers of wood-based fibers with respect to their sustainable wood and pulp sourcing, their efforts with regard to using alternative non-wood feedstock and their achievements for lasting conservation in critical forests round the globe.

Leading in sustainable sourcing with a decade-long clean record
Wood and pulp are the most important raw materials for Lenzing’s sustainable production of cellulosic fibers. The Lenzing Group is particularly proud of its decade-long clean record of sustainable wood sourcing, evidenced by its long-standing credible commitment to wood certification, which Lenzing pioneered already in the 1990s. Lenzing’s commercial wood sources are  100 percent either certified by FSC® or PEFC™, or controlled in line with FSC® standards.

Social impact and afforestation project in Albania
At the backdrop of Lenzing’s long history of clean sourcing, the company is even more aware that the global forests are seriously threatened by illegal logging and deforestation but also by the consequences of climate change. This is why Lenzing – in addition to supporting a number of Canopy’s conservation projects – has set up a social impact and afforestation project in Albania (Southern Europe).*

Special focus on sustainable plantations in Brazil
For its latest investment in a pulp mill in Brazil, Lenzing actively collaborates with Canopy to ensure that the wood sourcing is in line with sustainable practices. The plant will be among the highest productive and energy-efficient facilities in the world and will feed the 40 percent excess bioelectricity generated on site as “green energy” into the public grid.*

REFIBRA™ technology: Commercially available since 2017
As a long-standing player in the industry, Lenzing has undertaken extensive research into many different alternative non-wood cellulose sources such as annual plants, like hemp, straw, and bamboo. Until now, textile waste has turned out to be the most promising alternative feedstock for scaled commercial use.
Lenzing’s lyocell fiber produced with the breakthrough REFIBRA™ technology (Eco Cycle technology for nonwoven applications) uses textile waste as part of the feedstock and is an important step towards a circular economy.*

50 percent recycled content by 2024
It is Lenzing’s vision to make textile waste recycling a common standard process like paper recycling and to offer fibers produced with REFIBRA™ technology with up to 50 percent recycled content from post-consumer waste by 2024.

*Please read attached document for more information

• Kettelhack GmbH – a German leader in the dyeing and finishing of monochrome fabrics for high-quality and durable workwear and bed linen – has this year retired its existing Monforts sanforizing line after 35 years of daily service, replacing it with a new one.

The first line was installed in 1985 during a decisive time for the company.

Taking the helm in the early 1980s, Jan Kettelhack – the current CEO, owner and great grandson of Heinrich Kettelhack who founded the company back in 1874 – made a number of decisions that have secured its success over the following decades.

In 1982 Kettelhack had to vacate its existing plant in the city of Rheine due to urban development restrictions and despite a general sense of crisis in the European textile industry at that time, opted to relocate and build a new highly automated plant that was not reliant on mechanical and personnel-intensive processes. This was aligned with a greater focus on competitive international sales.

From 1986, the company’s proficiency as a specialist in solid-colour textiles led to workwear textiles becoming a bedrock of the business. Continuous investments in machinery and technical equipment have resulted in a fully integrated and rationalised single source site dedicated solely to what the company does best – the expert dyeing and finishing of textiles.

Crucial process steps

These stages in the textile value-added chain, Jan Kettelhack has observed, are crucial to the quality of a final product in workwear – whether it stands the test in everyday use, how comfortable it is, and how many washes it can withstand.

Central to this is the sanforizing process, which pre-shrinks a fabric by compressing it prior to washing. This limits any residual or further shrinkage in a made-up finished garment to less than 1%, to ensure perfect comfort and fit over an extended lifetime.

“We certainly can’t complain about the performance of the old Monfortex sanforizing line which gave us so many uninterrupted years of service, but certain spare parts for it were becoming increasingly hard to source, the control unit was becoming a little unstable and we couldn’t risk potential interruptions to our production schedule,” says Kettelhack plant manager Hendrik Pleimann. “In many ways, the new Monfortex sanforizer is much the same as the old one in terms of its mechanical reliability and robust construction, but of course today’s drives are much more efficient, and when it comes to the automation features and control units – and the data we can generate and analyse for increasing efficiency – that’s a whole new world.”

Qualitex 800

The two-metres-wide Monfortex line benefits from the latest Qualitex 800 control system which allows all parameters to be easily automated via the 24-inch colour touchscreen, including production speed, control of all fabric feed devices, rotation spray or steaming cylinder options, the width of the stretching field and the rubber belt pressure.

The integrated Compactomat system allows a continuous indication and control of the shrinkage values and the temperatures of the shrinking cylinder and felt calender. Up to 10,000 separate process parameter records can be generated and stored by the data manager.

Full line management can be optimised via the batch-specific calculation of all process material consumption and water and electricity use, with any standstill times analysed and immediately corrected for the future.

Any further assistance required is available via Monforts Teleservice, with direct connection to technicians and virtual access to machine analysis.

Professional

Commissioning of the new Monfortex line at Kettelhack commenced in January and it was fully operational in a relatively short time.

“This was a very professional installation provided by the Monforts team with whom we have a very good relationship dating back many years, and everyone knew what was required from both sides,” says Mr Pleimann. “Our operators have found the new line very user friendly and we are very pleased with how everything proceeded so smoothly. An unexpected benefit is that the new line is also a lot quieter, of course, which is something our operatives are appreciating.”

Key features of the Monfortex line are the proven fabric preparation, weft straightening and spreading units, prior to the compressive shrinkage machine with a 750mm shrinking cylinder, and a felt calender equipped with 2,000mm diameter drying cylinder. The line also features an integrated automatic grinding unit.

Customer service

Kettelhack is processing primarily cotton and polyester woven fabrics, with lyocell becoming increasingly popular in workwear for its softness and comfort.

As part of its customer service, the company stocks more than a million metres of grey fabric and at least 1.2 million metres of finished and rolled standard fabric in its warehouse at any one time, with a further 750,000 metres permanently in production.

While a significant cost, this commitment ensures Kettelhack customers can be fully flexible and rely on it as a partner.

“As a family-run company with around a hundred employees, Kettelhack operates very differently to bigger businesses which have to constantly consider their immediate quarterly profits,” Mr Pleimann concludes. “The thinking at Kettelhack is in terms of the next twenty years and ensuring that the business will be just as successful for the next generation as it is today. We also have a very flat organisational structure in which everyone is involved and takes an active part, which makes it a very nice place to work.”

• Investment of approx. USD 1.3 bn in 500,000 t dissolving wood pulp plant
• Key milestone to structurally strengthen cost leadership position
• Significant step towards carbon neutrality

The Lenzing Group and Duratex announced that they will build a 500,000 t dissolving wood pulp plant in the State of Minas Gerais, near Sao Paulo (Brazil). The start-up is planned for the first half of 2022. In the joint venture, Lenzing holds a 51 percent, Duratex a 49 percent stake. The expected industrial CAPEX will be approx. USD 1.3 bn. The project is financed through long-term debt. The corresponding financing contracts are expected to be concluded at the end of the first quarter of 2020.

Key milestone to structurally strengthen cost leadership position
The new dissolving wood pulp plant strengthens the Lenzing Group’s backward integration and cost position as well as its specialty fiber growth in line with its sCore TEN corporate strategy. The single-line dissolving wood pulp plant with an annual nameplate capacity of 500,000 tons will be the largest and most competitive production facility of its kind. Dissolving wood pulp is a key raw material required for manufacturing Lenzing’s biobased fibers. The joint venture will supply the entire volume of dissolving wood pulp to the Lenzing Group.

“Wood-based cellulosic fibers offer an important contribution to enhance sustainability in the textile industry. In line with its corporate strategy sCore TEN, Lenzing is committed to drive organic growth in this market. With this investment, we will become more competitive, act more independently and subsequently strengthen our market position. The trust and support of the main shareholders of Lenzing and Duratex were of great importance for this key project”, states Stefan Doboczky, CEO of the Lenzing Group.

Strong focus on sustainability
In planning the new production facility, particular importance was given to sustainability aspects. The joint venture secured FSC®-certified plantations1 covering an area of over 44,000 hectares to provide the necessary biomass. These plantations operate completely in accordance with the guidelines and high standards of the Lenzing Group for sourcing wood and pulp. The plant will operate among the highest productive and energy-efficient in the world and will feed the 40 percent of excess bioelectricity generated on site as “green energy” into the public grid. With this project, Lenzing sets a milestone in its strategy to carbon neutrality.