From the Sector

Groz-Beckert offers interested machine builders various cooperation opportunities to jointly develop new products or improve existing ones. In collaboration with Vanguard Pailung, a manufacturer of ultra-high-speed knitting machines for body-size products, Groz-Beckert has developed an innovative slider needle for a new generation of machines. Groz-Beckert's Technology and Development Center (TEZ) provides the appropriate framework for so-called co-development projects.

In June 2022, Vanguard Pailung approached Groz-Beckert with a cooperation request. Together with Groz-Beckert, the company wanted to develop a new needle solution for an innovative ultra-high-speed machine. Together with an innovative slide needle, the new machine was to exceed the speed and productivity of known knitting systems of large circular knitting machines.

Machine and needle development ran in parallel and were closely coordinated. The first field tests took place in the Vanguard Pailung laboratory in Monroe/NC, USA in February 2023. The successful development was presented to a wide audience for the first time at ITMA 2023 in June.

Unlike latch needles, slide needles do not form the stitch via a needle latch, but via a slide that is controlled by its own channel. The advantage of this is that the needle can withstand high speeds, as there is no latch impact, which in turn increases productivity.

The use of the new slide needle in ultra-high-speed machines ensures a particularly high level of process reliability. With the new needle variant, the closer is guided safely and precisely in the groove in the needle shank. At the same time, the base of the needle shank is closed, which ensures maximum stability. The slider needle reliably prevents the so-called latch impact and thus makes a decisive contribution to process reliability. Its use ensures a uniform and speed-independent loop structure, even at maximum speeds.

Operating in Bangladesh since 1996, this is the fourteenth time the Japanese manufacturer is participating in DTG.

As the Bangladeshi textile industry calls for sustainable production through innovation and digitalization, the market is keen to establish effective business models that support such production. In response, for the first time in its DTG exhibition history, SHIMA SEIKI's lineup consists entirely of WHOLEGARMENT® knitting machines. Capable of knitting an entire garment in one piece without the need for linking or sewing while using only the material required to knit one garment at a time, WHOLEGARMENT® knitting is famous for promoting sustainability in the knit factory.

The company is showing its MACH2®XS153 WHOLEGARMENT® knitting machine in 15L gauge, as well as its SWG®091N2 "Mini" WHOLEGARMENT® knitting machine in 15 gauge. MACH2®XS features 4 needle beds and SHIMA SEIKI's original SlideNeedle™, capable of producing high-quality fine gauge WHOLEGARMENT® knitwear in all needles. SWG®091N2 provides opportunities in WHOLEGARMENT® knitting across a wide range of items in a compact, economical package. A different approach to WHOLEGARMENT knitting is also shown in the form of the N.SVR®183 machine. SHIMA SEIKI's global standard in shaped knitting, the N.SVR® series now features a model for producing WHOLEGARMENT® knitwear using every other needle in fine gauge. Shown in 18 gauge at DTG, N.SVR®183 is the ideal machine for flexible, entry-level WHOLEGARMENT® production, with the versatility to respond to fluctuating market demand.

Demonstrations are performed on SHIMA SEIKI's SDS®-ONE APEX4 design system. At the core of the company’s "Total Fashion System" concept, it provides comprehensive support throughout the supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to machine programming, production and even sales promotion.

Groz-Beckert will be represented at ITMA with its six product sectors and will showcase its various innovations. The presentations at the booth will be supported by augmented reality applications. This allows visitors to discover the products both live and virtually.

The Knitting product sector will be represented at the Groz-Beckert stand with its four product groups circular knitting, flat knitting, legwear and warp knitting. In the circular knitting segment, for example, two newly developed knitting systems will be on show which have been realized in collaboration with machine manufacturers. The developments focus on energy savings, extended cleaning intervals and increased process reliability.

In addition to the machines for weaving preparation, the Weaving product sector will present its recently expanded portfolio of technical weaving reeds. The new weaving reeds make it possible to supply customers who produce fabrics with high densities. The weaving reeds are used in the production of special fabrics, for example, in technical filtration, membrane technology, solar cells or touch screens.

Products and services for classic needling and hydroentanglement will be presented by the Felting (Nonwovens) product area. In the field of felting needles, visitors can look forward to two innovations: a new notch shape and the Groz-Beckert felting needle module. In the felting needle module, the needles are embedded as a module in a plastic mold for the first time. The needle modules are characterized by high deformation resistance and offer new dimensions in needle density.

For the production of tufted floor coverings such as carpets, bath mats or artificial turf, the Tufting product sector will be presenting its proven Gauge Part system.

Various new and further developments will also be shown by the Carding product area. For those interested in the nonwovens industry, for example, the world's finest Interlocking wire for reduced risk of crashis included. For customers of the spinning industry, the division will be presenting further developed stationary flats and revolving tops. The new revolving tops have been adapted to the processing of fine yarns, while the stationary flats have been provided with a new, resistant aluminum profile.

The Sewing product sector is focusing on the presentation of its special application needles, SANTM. The sewing machine needles of the SANTM series have been specially developed for demanding sewing operations – e.g. for sewing technical or finest textiles. The division will also be presenting its new Needle Finder. The Needle Finder is an interactive tool in the online customer portal that helps customers select the right needle.

The 11^th India ITME will take place from December 8.– 13., 2022, in Noida, India. Over 1,800 exhibitors and more than 150,000 trade visitors from the textile and apparel industry from all over the world are expected. Groz-Beckert will be presenting innovations from its various product areas..

India ITME takes place every four years and is the ideal technology platform for forward-looking innovations in the textile world. At the 11th edition of India ITME, exhibitors will be presenting their highlights from research and development across 15 halls.

The Knitting Product Division will be presenting several new products at India ITME: Among them the SAN™ SF staple fiber needle and the SNK SF staple fiber sinker, which are specially designed for use on large circular knitting machines. The division will also be exhibiting the SAN™ TT for application-related use in the field of technical textiles for flat knitting machines, as well as a needle which enables the advance into new dimensions of gauge in the flat knitting sector.

Groz-Beckert will also be demonstrating its competence as a system supplier in the field of warp knitting at the India ITME. The warp knitting machine needles and system parts from Groz-Beckert are precisely matched to one another and achieve a uniform and flawless warp knitting process.

With the WarpMasterPlus and the KnotMaster, the Weaving product division presents the latest generation of drawing-in and knotting machines from Groz-Beckert. They are particularly distinguished by their ease of operation and flexibility.

The product area Felting (Nonwovens) presents its product and service highlights for the nonwovens industry. These include the HyTec P jet strip for spunlace customers as well as the GEBECON felting needle, the dur needle, EcoStar felting needle and the Groz-Beckert customer product. The HyTec P-nozzle strip is characterized by improved handling and higher hardness. The patented GEBECON felting needle offers an improved surface finish and optimized breakage bending properties.

The Carding product area will present its further developments for the spinning industry. These include the new stationary flat series, the TV56 revolving top and the cylinder wire set with special tooth geometry. The new stationary flat series is characterized by an innovative tooth geometry and a new type of tooth distribution. The new TV56  revolving top with its new setting pattern and 560 points per square inch is particularly easy to clean. The improved cylinder wire convinces with its special and patented tooth shape, which has a positive effect on the maintenance effort. This makes it particularly suitable for quality-oriented cotton spinning mills producing high-quality yarns. Visitors can also look forward to the new InLine card clothing series for the nonwovens sector.

In the Sewing exhibition area, the focus is on technical textiles – in particular the manufacture of car seats. The answer to the high demands of sewing car seats is the special application needle SAN® 5.2 from Groz-Beckert. The special geometry gives it sufficient stability. The double groove at the point improves thread guidance and leads to a uniform seam pattern, especially in multidirectional sewing processes. The scarf chamfer on both sides of the needle prevent skipped stitches and optimize loop formation. The wear protection is increased by the titanium nitride coating GEBEDUR. In addition, the quality management INH will be exhibited and the functions and contents of the customer portal will be presented.

SHIMA SEIKI ITALIA S.p.A. will exhibit at the 91st edition of the Pitti Immagine Filati exhibition in Florence, Italy from 29th June till 1st July, 2022. Products exhibited will include the SWG-FIRST124 and N.SIR123SP computerized flat knitting machines as well as APEXFiz™ design software.

The renewed SWG-FIRST124 is a synthesis of all of SHIMA SEIKI’s experience and know-how in computerized shaped knitting, realizing a tremendous range of knitting from full-fashioning and rib shaping to integral knitting. This all-purpose capability is made possible by the revolutionary SlideNeedle™, which, together with loop pressers and transfer jacks, offers remarkable variety, expanding the boundaries of flat knitting with the capability to produce garments that were previously impossible to produce.

The N.SIR123SP computerized knitting machine with intarsia capability features a special loop presser bed for producing hybrid inlay fabrics with both knit and weave characteristics. N.SIR123SP will also feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch. Plating can be performed within the same course and for individual needles. In combination with the loop presser and spring-type moveable sinker system even greater diversity in knit design is possible.

APEXFiz™ is subscription-based design software that supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain.

Continuing from past editions of Pitti Filati are knit samples produced in collaboration with Italian designer Vittorio Branchizio. Staff at the SHIMA SEIKI booth will be donning knit uniforms produced as a collaborative effort between SHIMA SEIKI ITALIA, knitting companies and yarn companies.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 90th edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the N.SVR®123SP computerized flat knitting machine as well as APEXFiz™ design software.

The N.SVR®123SP computerized knitting machine features a special loop presser bed, capable of producing hybrid inlay fabrics with both knit and weave characteristics. Demand for such novel fabrics are very high across a wide range of applications, from fashion apparel to sportswear, innerwear, outerwear, uniforms and other functional clothing, as well as home furnishing and technical textiles. Shown in 18G at the SHIMA SEIKI booth, N.SVR®123SP will also feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch. Plating can be performed within the same course and for individual needles. In combination with the loop presser and spring-type moveable sinker system even greater diversity in knit design is possible. An SVR®123SP machine in 14G with i-Plating option will also be on display at the booth of yarn spinner IAFIL S.p.A. as well.

APEXFiz™ is subscription-based design software that maintains the proven functions that have made SHIMA SEIKI’s SDS®-ONE APEX series design systems so popular with fashion designers. Installed on personal computers, those strengths are now enhanced with the added versatility to adapt to different work styles and business environments including teleworking and telecommuting. APEXFiz™ software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain.

APEXFiz™ along with SHIMA SEIKI’s yarnbank™ digital yarn web platform are featured at a special section launched at the previous session of Pitti Filati no. 89 called Pitti Studios. Pitti Studios is a content production service that yarn companies exhibiting at Pitti Filati can use for their own promotion. Yarn companies provide a piece of yarn, which is digitized on yarnbank™ and used to simulate photorealistic fabric on APEXFiz™. This is then processed by a creative studio specializing in digital content to provide static and animated 3D virtual representations. The process shows how to use the latest DX tools to provide accurate representation of a finished garment without having to produce any fabric, converting the conventionally wasteful process of sample-making into a sustainable one.

Continuing from past editions of Pitti Filati are knit samples produced in collaboration with Italian designer Vittorio Branchizio.