From the Sector

Built on an island right off the Finnish capital Helsinki, the Nolla cabin represents an ecological alternative to cabin life.

This summer, living with minimal emissions will be put to the test. Neste is building a prototype of a cabin that has a minimal environmental impact in terms of both carbon dioxide emissions and concrete impact on nature. The Nolla (= zero) cabin, designed by Finnish designer Robin Falck, is located just outside Helsinki city center, on the Vallisaari island. The cabin has been built from sustainable materials and is designed for a simple lifestyle with minimal to no emissions, taking into account the surrounding nature in every respect.

Located on the idyllic island of Vallisaari in the Helsinki archipelago, the Nolla cabin encourages people to consider how modern solutions and innovations could enable sustainable cabin living. Vallisaari has been in a natural state for decades and is thus the perfect location for an urban cabin experience, located at a 20-minute boat ride away from the Helsinki market square. The ecological and mobile Nolla cabin will be in Vallisaari until the end of September, demonstrating a lifestyle that generates minimal to no emissions.

Placing the compact and mobile cabin on its private lot does not require a construction permit
and it has been designed to use building materials as effectively as possible. The cabin is the size of a small bedroom and can be assembled and transported without heavy machinery, leaving its environment nearly untouched. The Nolla cabin has been designed by Finnish designer Robin Falck, whose earlier design, Nido cabin, has been globally acknowledged.

The Nolla cabin introduces solutions, which enable minimizing cabin life emissions remarkably. The energy supply of the cabin is entirely renewable; electricity is generated by solar panels, whilst the Wallas stove, reserved for cooking and heating, runs entirely on Neste MY Renewable Diesel, made 100% from waste and residue. The Aava Lines raft operating between Helsinki city centre and Vallisaari will also run on Neste MY Renewable diesel that can reduce greenhouse gas emissions by up to 90%.

“With the Nolla cabin, we want to offer visitors the possibility to experience modern cabin life in the realm of nature, with minimal emissions. An ecological lifestyle does not only require giving up unsustainable commodities, but also discovering modern, sustainable solutions that can be used instead. This has been an essential part of the design process”, says Falck.

“Finns are known for spending time at their beloved summer houses. We wanted to explore sustainable solutions that could enable cabin life with minimal emissions. Shared and circular economy, as well as new technologies and innovations have made it possible to enjoy our cabins without harming or burdening the environment. Some of the solutions that have been used at the Nolla cabin are perfectly adaptable at any cabin”, says Sirpa Tuomi, Marketing Director at Neste.

The Nolla cabin is executed in collaboration with Fortum, Wallas and Stockmann and is part of the Journey to Zero project by Neste, which explores new ideas and aims to steer the world towards a cleaner future with fewer emissions.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, will be presenting its innovative denim solutions for manufacturers and brands at DenimsandJeans India 2018, on August 1 & 2, in Bangalore, India.

Just two months after the DenimsandJeans Vietnam show, Archroma will again showcase its unique combination of technologies for denim effects and colors, from fiber to finish, from the authentic roots of indigo to the most innovative and eco-advanced solutions.

At the India show, Archroma’s expert team will also present its coatings and washing solutions aiming at bringing denim creativity to a whole new dimension.
Visitors at the booth will be able to see an “illustration collection” of exciting indigo casts.

DENISOL®, BRINGING INDIGO BACK TO ITS ROOTS - NOW ANILINE-FREE*
Archroma’s Denisol® range is a newly developed pre-reduced liquid indigo solution that is manufactured in Archroma’s award winning ‘zero liquid discharge’ manufacturing plant in Pakistan. Denisol® Indigo 30 liq is compliant with major official eco-standards and requirements from retailers, brands and fashion leading companies and helps to produce fabrics suitable for current eco-labeling such as bluesign® and GOTS.

Responding to demands for a non-toxic alternative to the dyes that are used for the iconic and traditional indigo blue that consumers associate with denim and jeans, Archroma just announced the upcoming new Denisol® Pure Indigo 30.

ADVANCED DENIM, TOWARDS WATERLESS DENIM DYEING
Consider this: The water needed to produce one pair of jeans is said to be ~ 11'000 liters(1). With approximately 167 million pairs of jeans produced monthly(2), that is 1,837,000,000,000 liters of water consumed every month in the process!
Based on the Denim-Ox and Pad/Sizing-Ox dyeing processes, Archroma’s multi-awarded ADVANCED DENIM, dyeing technology allows savings of up to 92% in water, 87% in cotton waste and 30% in energy, compared to a conventional denim dyeing process.

The technology has been adopted by brands like Patagonia and received the prestigious 2012 ICIS Innovation Award and Innovation with Best Environmental Benefit Award.

• Optisul® C, “soft colors” made easy
  With Optisul® C dyes, denim manufacturers can produce soft denim colors in continuous dyeing processes, as well as on coating and printing. Optisul® C affinity-free, sulfide-free dyes can easily be combined with each other to create garments suitable for wash-down treatments in a wide array of easily achievable and reproducible soft colors.
  They are suitable for GOTS and bluesign® approval.
• Diresul® RDT Ocean Blues, ocean-themed bright sulfur blue dyes
  Archroma’s Diresul® RDT Ocean Blues are a collection of vibrant, ocean-themed bright sulfur blue dyes. These best-in-class dyes and their auxiliaries bring out the best of indigo, improve workability, dyeing consistency and process safety.
  They can be combined with Denisol® Indigo 30 liq in bottoming/topping manufacturing routes for avant-garde blue styles.
• Diresul® blacks & greys, a cosmos of greys and deep black and navies
  Archroma’s dye portfolio of conventional and black Diresul® specialties allow to create a universe of greys and deep black and navies. From superficial to solid blacks for both extreme wash-down and stay black effects.

EARTHCOLORS, TRACEABLE FROM NATURE TO FASHION
The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
The EarthColors allow to produce the earth tones that are coming strong: red, brown and green colors. They have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.

COATING, A WHOLE UNIVERSE OF COLORS AND EFFECTS
Archroma’s dye and chemical specialties portfolio allows to create exciting colors and effects using coating applications, from exclusive sulfur dyes and pigment specialties that help highlighting the indigo look, to functional finishes that give performance to denim garments - using water-based, formaldehyde-free or ultra-low formaldehyde polymers.

SOLUTION PACKAGES FOR SUSTAINABILITY
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.
Archroma’s portfolio of ZDHC MRSL-compliant chemicals and dyes is integrated into the ONE WAY calculation tool since 2013.
“It is time to make denim in a whole different way; denim that brings together innovation, sustainability and creativity,” says Anjani Prasad, Head of Sales India, Archroma. “Brands around the globe are exploring how to make fashion in a cleaner and safer way, and Archroma has the solutions to do just that, to create denim with a soul.”
Visit Archroma at DenimsandJeans India 2018 at t at Hotel Lalit, Bangalore, India, on August 1 & 2, 2018.
* Below limits of detection

(1) Arjen Y. Hoekstra, The Water Footprint of Modern Consumer Society
(2) American Chemical Society, www.sciencedaily.com/releases/2012/06/120619123753.htm.
Denisol®, Optisul®, Diresul® are trademarks of Archroma registered in many countries.
© 2018 Archroma

Penn Textile Solutions and Penn Italia introduce ECOINNOVATION, fully sustainable products range! These must-see products are created using the world’s first premium stretch yarn by ROICA™ that is Cradle to Cradle Certified™ Gold level for Material Health and Hohenstein Environment Compatibility Certificate for breaking down without releasing harmful substances.

Penn Textile Solutions and Penn Italia, a fully integrated international-minded company with over 50 years’ expertise in producing innovative warp and weft knit textiles that answer customers’ demands, including fantastic elastomeric knitted textiles.

Penn Textile Solutions and Penn Italia wisely picks ROICA™ premium stretch fiber to create our ECOINNOVATION, a new fully sustainable range of advanced textiles that are 100% sustainable. ROICA™, produced by Asahi Kasei, is the secret premium stretch ingredient we used to provide comfort, enhance quality and confidence. Thus, making stretch performance a specialty fiber that generates new values for contemporary consumers.

ECOINNOVATION presents seven unique articles developed belonging to Penn Textile Solutions and Penn Italia’s family dreamshape® characterized by reinforced edges and seizing that includes the following recycled items; tulle, tulle galloons with dreamshape® reinforced edge, tricot, dreamshape® reinforced gripping edge (great for cycling shorts), stretch satin, polyester tulle and polyester double jersey perfect for laser cutting.

In line with the powerful global trend towards smarter fashion solutions, Iluna Group launches its Embroidery Division. Specialists in lace since 1985, the new Embroidery Division offers a complete and innovative product match in line with the modern expectations of brands and retailers. Staying true to Iluna’s DNA, the introduction of embroidery and guipure are all produced with only recycled materials.
IIn addition to the launch of the Embroidery Division, this season novelties include:

1. Of major interest today, the launch of velvet lace entirely made of sustainable materials including ROICA™ Eco-Smart family.

2. Within the Black Label collection, the Ultralight series is enriched with new multicolor floral galloons: here Iluna changes the color of the thread not only in the background, but also in the design, the same article reinvents itself in a variety of great visual impact.

3. Green Label collection, the Iluna dedicated range featuring a new responsible approach in respect of the planet and people, able to deliver innovation, beauty and quality, at 360°. In addition to the all over, jacquard, double jacquard and mesh offer, the line is also featuring new stretch Galloon laces fully made with GRS certified recycled materials, including the stretch thanks to the introduction of the unique ROICA™ sustainable yarn part of the ROICA™ Eco-Smart family.

4. ILUNA has strategically included in all their stretch laces only ROICA™ Eco-Smart family of sustainable yarns since some time.

5. ILUNA can also boast its new STeP (Sustainable Textile Production) certification by Oeko-Tex, a certification that clarifies and communicates the company’s sustainable production commitment. In addition to this, all products are Oeko-Tex 100 certified.

6. ILUNA has created the new e-shop offering its exclusive materials to smaller companies looking for added values as: creativity, innovation, made in Italy and responsibility.

7. The whole collection is also visible online at its web site, previous registration, and orders can be done directly online always aiming to customers care.

Archroma, a global leader in color and specialty chemicals, will be presenting its innovative and sustainable denim solutions for manufacturers and brands at DenimsandJeans Vietnam 2018, on June 27 and 28.
From fiber to finish, Archroma offers a scope of possibilities for effects and colors, from the authentic roots of indigo to the most innovative and eco-advanced solutions. Archroma is a recognized leader in integrated solutions, offering best-in-class auxiliaries for bespoke process packages.
Visitors will be able to discover solutions designed to make denim in a more sustainable and responsible way, in particular:
DENISOL®, BRINGING INDIGO BACK TO ITS ROOTS - NOW ANILINE-FREE*
Archroma’s Denisol® range is a newly developed pre-reduced liquid indigo solution that is manufactured in Archroma’s award winning ‘zero liquid discharge’ manufacturing plant in Pakistan.

• Denisol® Indigo 30 liq is compliant with major official eco-standards and requirements from retailers, brands and fashion leading companies and helps to produce fabrics suitable for current eco-labeling such as bluesign® and GOTS.
• Responding to demands for a non-toxic alternative to the dyes that are used for the iconic and traditional indigo blue that consumers associate with denim and jeans, Archroma just announced the upcoming new Denisol® Pure Indigo 30.

ADVANCED DENIM, TOWARDS WATERLESS DENIM DYEING
Consider this: The water needed to produce one pair of jeans is said to be ~ 11'000 liters(1). With approximately 167 million pairs of jeans produced monthly(2), that is 1,837,000,000,000 liters of water consumed every month in the process! Based on the Denim-Ox and Pad/Sizing-Ox dyeing processes, Archroma’s multi-awarded ADVANCED DENIM, dyeing technology allows savings of up to 92% in water, 87% in cotton waste and 30% in energy, compared to a conventional denim dyeing process.
The technology has been adopted by brands like Patagonia and received the prestigious 2012 ICIS Innovation Award and Innovation with Best Environmental Benefit Award.

• Optisul® C, “soft colors” made easy
  Colors other than blue have been tricky to achieve in the past. With Optisul® C dyes, denim manufacturers can expand their color horizons with this range of six dyes especially designed to produce soft denim colors in continuous dyeing processes, as well as on coating and printing. Optisul® C affinity-free, sulfide-free dyes can easily be combined with each other to create garments suitable for wash-down treatments in a wide array of easily achievable and reproducible soft colors. They are suitable for GOTS and bluesign® approval.
• Diresul® RDT Ocean Blues, ocean-themed bright sulfur blue dyes
  Archroma’s Diresul® RDT Ocean Blues are a collection of vibrant, ocean-themed bright sulfur blue dyes. These best-in-class dyes and their auxiliaries bring out the best of indigo, improve workability, dyeing consistency and process safety.
  They can be combined with Denisol® Indigo 30 liq in bottoming/topping manufacturing routes for avant-garde blue styles. At the booth, Archroma will display an “illustration collection” of exciting indigo casts.
• Diresul® blacks & greys, a universe of greys and deep black and navies.
  Archroma’s dye portfolio of conventional and black Diresul® specialties allow to create a universe of greys and deep black and navies. From superficial to solid blacks for both extreme wash-down and stay black effects.

EARTHCOLORS, TRACEABLE FROM NATURE TO FASHION
As consumers increasingly aspire to functional, beautiful and meaningful clothing, brands and manufacturers are increasingly interested in the environmental impact of the denim industry. Archroma has placed sustainability at the heart of its innovation process to create products and processes that improve the industry’s sustainability.
The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
The EarthColors allow to produce the earth tones that are coming strong: red, brown and green colors. They have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.

SOLUTION PACKAGES FOR SUSTAINABILITY
Brand owners and retailers around the world are taking action to evaluate the environmental impact of textile treatment, dyeing and finishing processes in response to consumer concerns.

Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.
Archroma’s portfolio of ZDHC MRSL-compliant chemicals and dyes is integrated into the ONE WAY calculation tool since 2013.
“Innovation and sustainability go hand in hand,” says Paul O’Prey, Head of Sales, Brand & Performance Textile Specialties, Archroma, Vietnam. “While developing new products and services, we always consider the environmental impact so they are as sustainable as possible. This can be seen in our innovative and eco-advance products, such as the water-saving ADVANCED DENIM and the aniline-free* Denisol® Pure Indigo.”

• Lenzing will hold 51 percent in a future joint venture
• Largest single line dissolving wood pulp plant in the world
• Basic engineering and permitting process to be kicked off
• 43,000 hectares FSC® certified plantation secured
• Final investment decision subject to outcome of basic engineering expected in 2019

Lenzing Group, world market leader in specialty cellulosic fibers and Duratex, the largest producer of industrialized wood panels of the Southern Hemisphere, announce that they agreed on the terms and conditions to form a joint venture to investigate building the largest single line dissolving wood pulp (DWP) plant in the state of Minas Gerais, close to Sao Paulo, Brazil. This decision supports the backward integration and the growth in specialty fibers, defined in Lenzing’s corporate strategy sCore TEN.

The joint venture will investigate the construction of a 450,000 t DWP plant, which is expected to become the largest and most competitive single line DWP plant in the world. Dissolving wood pulp is the key raw material for the production of Lenzing’s bio-based fibers. For the future operation, the two companies have secured a plantation of 43,000 hectares that will provide the FSC® certified biomass. The plantation is fully in line with Lenzing’s wood and pulp sourcing policy. The basic engineering and the application for required permits and merger clearances will now be started.

Lenzing will hold 51 percent of the joint venture which will operate the mill, while Duratex’s share will be 49 percent. The estimated cash investment by the joint venture for the construction of the DWP mill is expected to be somewhat above USD 1 bn (based on current FX rates, net of generic tax refunds and the outcome of the basic engineering study). The joint venture will supply the entire volume of dissolving wood pulp to the Lenzing Group. This step is an essential milestone in the group’s ambition to grow its specialty fibers business.

“Specialty cellulosic fibers are an important contribution to make the global textile industry more sustainable. In line with our corporate strategy sCore TEN we are committed to strong organic growth in this field. We are pleased that with Duratex, a recognized leader in sustainable forestry management, we have a strong partner in this joint venture. Together we will create a very sustainable and competitive raw material base for Lenzing’s global expansion plans”, says Stefan Doboczky, Chief Executive Officer of Lenzing Group.

“Projects of this nature are the result of our strategic plan and of our team’s effort towards drawing Duratex’s future. The Company is known for its financial solidity, high quality, innovation and sustainability; the results of a history spanning over six decades. The partnership with Lenzing for the construction of the largest single line dissolving wood pulp plant in the world is an honor for Duratex. Working with Lenzing, a global benchmark in technology, high quality and corporate governance makes us very proud. We are sure that this joint venture is going to be successful”, affirms Duratex’s Chief Executive Officer Antonio Joaquim de Oliveira.

The final investment decision to build the dissolving wood pulp plant is subject to the outcome of the basic engineering studies and the approval by the respective supervisory boards.

Archroma, a global leader in color and specialty chemicals, has presented an aniline-free* denim indigo dye at the recent Planet Textiles 2018 Conference in Vancouver, Canada. The brand new dye provides a non-toxic way to produce the traditional, iconic indigo blue that consumers associate with denim and jeans.
Currently, aniline impurities are an unavoidable element of producing indigo-dyed denim. Unlike other chemical impurities, aniline is locked into the indigo pigment during the dyeing process and therefore cannot be washed off the fabric.

Scientific testing has shown that aniline impurities are toxic to humans, causing skin allergies, damage to major organs and genetic defects, as well as being linked to cancer. Aniline is also toxic to aquatic life, which is an issue as two thirds of the 400 metric tons of aniline waste on an annual basis ends up in the environment as wastewater discharge. The toxic chemical is therefore starting to feature on the restricted substance lists (RSL) of some major clothing brands and retailers. “We have tested denim garments and found that aniline concentrations are frequently higher than expected,” says Alexander Wessels, CEO, Archroma. “This could put some manufacturers over the limits agreed on their RSLs.”

True to its commitment to take on innovation challenges, Archroma decided to take a closer look at the issue with its R&D experts, and developed an alternative system that is aniline free*.
“At Archroma, we continuously challenge the status quo in the deep belief that we can make our industry sustainable,” continues Alexander Wessels. “By removing a hazardous impurity from the denim supply chain, we aim to protect the workers who create denim, the consumers who wear denim, and the environment with cleaner waterways.” The Denisol® Pure Indigo 30 dye is the latest in a long line of sustainable innovations for denim started in 2009. That year, Archroma introduced its ‘Advanced Denim’ technology which uses up to 90% less water during the dyeing process. “Being not indigo but sulfur based, ‘Advanced Denim’ itself was an aniline free solution too!”, adds Alexander Wessels. For designers and brand owners who long for authentic indigo inspiration, the new Denisol® Pure Indigo 30 now also makes it possible to produce indigo-dyed denim without high levels aniline impurities. Archroma successfully tested Denisol® Pure Indigo 30 at Absolute Denim mill in Thailand. “During the testing everything performed exactly the same as it would with conventional indigo,” says Vichai Phromvanich, Board Member, Absolute Denim. “There was just one important difference: no aniline.”

“We’ve had an overwhelming positive reaction from the industry in sneak previews and during the launch at Planet Textiles,” continues Alexander Wessels. “As a responsible industry leader, we believe it’s important to actively look for eco-advanced solutions that are attractive and at the same time cost-efficient for clothing brands, retailers and end-consumers.”

Archroma will make the Denisol® Pure Indigo 30 dye in the most sustainable way as possible. The new dye will be produced in Archroma’s facility in Pakistan, a plant that made the headlines in 2012 for being what Archroma believed to be the industry’s first zero liquid discharge plant.

• Additives, pigments and masterbatches for transportation, packaging, textiles & fibers
• Support to “future-proof” medical applications
• Contributing towards more sustainable engineering plastics

Clariant, a world leader in specialty chemicals, turns the spotlight on its increasing on-the-ground support and innovation focus for North America’s four key plastics application segments at NPE 2018 Booth S18155.

Clariant is pushing forward with plans for growth in the region by advancing R&D competencies, and increasing its manufacturing footprint and technical capabilities across its 50+ sites, 3 R&D and 6 technical innovation centers. Clariant’s innovations for the plastics industry include advanced additives, masterbatches and pigments which support the packaging sector in engaging consumers via differentiated, convenient solutions. At NPE, it will also highlight solutions for enhancing and protecting healthcare products, as well as its contribution to stronger and colorful textiles and fibers for everything from e-mobility to industrial applications.

Deepak Parikh, president of region North America, Clariant comments: “Clariant’s product innovation for the US and wider North American plastics industry embraces the region’s fastest growing end-use areas of automotive and construction. It also addresses the impact of trends driven by changing consumer lifestyle preferences and market regulations on other important segments such as packaging and healthcare.”

Transportation
Clariant brings color and protection to support the increasing use of engineering plastics and high temperture resins in automotive interiors, exteriors and under-the-hood. Halogen-free Exolit® OP 1400 provides outstanding flame retardancy to polyamide parts, enhances safety with UL 94 V0 performance down to 0.4 mm and enables the molding of complex parts with no mold deposits and blooming. Exolit OP 1400 has been awarded the Clariant EcoTain®label for outstanding sustainability and performance. At the same time, Clariant offers low-halogen controlled high-performance PV Fast® pigmentswith excellent migration and weather fastness properties to meet the high requirements of today’s transportation and automotive industry. Easy processing Renol® compounds and masterbatches for engineering and high temperature resins provide heat and light stability, and flame retardancy, while maintaining critical flow properties in parts like SMT connectors. Importantly, they are available as small lots which enables customers to purchase only what they require and contribute to a reduction in their carbon footprint.

Packaging
As US packaging manufacturers explore more consumer-friendly, lighterweight and appealing solutions, Clariant is on hand to support their functionality, sustainability-related and color desires. Clariant Pigments has an innovative cooperation with Konica Minolta and matchmycolor to enable fast, precise and efficient color matching of HDPE products, using select organic PV Fast and Graphtol® pigments that comply with FDA regulations. The ColorWorks®center in Chicago is dedicated to US brand managers and designers with teams of color design experts to create color formulations faster than ever before for bottles, caps, closures and films.

According to market reports, plastic pouches are gaining share from traditional pack types in packaged food and are mainstream in home care. To support smoother and more environmentally-compatible processing especially for film applications, Clariant offers an FDA-compliant, vegetable-based powder amide wax, Licolub® FA 1, which acts as a slip and anti-block agent. It is suitable for polyolefins and PVC.

Textiles & Fiber
At NPE 2018, Clariant puts the focus on strong and colorful textiles, carpets and industrial fibers. New AddWorks® TFB 117 offers a number of benefits to help stabilize and smoothen fiber production processes, protect color, and improve heat stability and mechanical properties of fibers. AddWorks TFB 117 ensures smooth spinnability with less filaments breakage, even at low processing temperatures and at high speed spinning up to 5,500 m/min. Clariant also offers a broad range of colorants for polypropylene, polyester, polyamide and acrylic fibers, featuring migration fastness, chemical stability, light- and weather-fastness.

Healthcare
Clariant supports risk control and regulatory compliance for medical polymer and pharmaceutical packaging solutions. Its Mevopur® color and performance masterbatches and compounds include a USP Class 6 line of compliant products and multiple global ISO, 87, 88, and 661.1 certifications ahead of the market deadline. Clariant also offers selected FDA-compliant organic pigments and polymer soluble dyes that meet purity migration fastness as well as toxicological properties for medical devices and pharmaceutical packaging.

• Deep Insights into the Multifaceted World of Cotton
• Quality, Innovation and Digitalisation are Crucial

From the 21st to the 23rd of March, the international cotton industry came together in the historic Bremen Town Hall, under the motto "Cotton Insights". More than 500 participants from almost 40 countries came to exchange views on the latest trends in the natural raw material as part of the conference organised by the Bremen Cotton Exchange in cooperation with the Fibre Institute Bremen. The 34th International Cotton Conference provided a varied, in-depth programme which addressed the current and burning issues within the industry.

Summarising his visit to the conference, Kai Hughes, Executive Director of the International Cotton Advisory Committee (ICAC) in Washington said “The Bremen Cotton Conference is unique because it brings the diverse world of cotton together in one place. It is always a great opportunity to learn about the latest innovations, talk to cotton merchants and get an overview of the industry".

Sustainability and Cotton
This year, the conference developed into a whole week of diverse events around the entire cotton supply chain. With the “SUSTAIN” event, which was organised in cooperation with the Weser-Kurier newspaper, it was possible to build a bridge between the issue of sustainability and the end consumer.
With the focus on Africa, the emerging continent, which also has a special significance for cotton, became the centre of attention.

In his opening speech, Henning Hammer, President of the Bremen Cotton Exchange, made it clear that sustainability is also of great importance during the Cotton Conference: "The three pillars of sustainability – the environment, the economy and social issues – were already playing a role in the cotton industry when the word sustainability was far from being on everyone's lips.
Many changes that are being demanded in the sense of responsible agriculture and responsible trade take their time, many are already in the starting blocks and a lot already exists. We have a very alert, active agricultural research worldwide."

The Keynotes
The keynote session, moderated by the journalist Lisa Boekhoff from the newspaper Weser-Kurier, gave participants an overview, with an informative analysis of the current cotton situation. Kai Hughes, executive director of ICAC, emphasised in his keynote address the need to provide credible facts and figures which should be the basis for the entire supply chain. The marketing of cotton and changing consumer habits in a globalised and digitalised world were the subject of lectures by Mark Messura, Cotton Incorporated and Robert Antoshak, Olah Inc. Eugen Weinberg and Michael Alt from Commerzbank took a look at the raw material from a stock market perspective.

Traceability and Digitalisation
Digitalisation is also a cross-cutting issue that runs through the entire supply chain of the cotton industry. In his opening speech, Prof. Axel S. Hermann, Head of the Fibre Institute Bremen, emphasised the importance of digitalisation for the industry. “It enables new approaches in cotton cultivation and textile processing, but also influences consumer behaviour and thus the necessary changes in the textile industry.” The focus is on the status quo of the implementation, as well as the opportunities and risks of digitally controlled, vertically integrated procurement and sales processes and the associated challenges at retail level.

Another current topic is traceability, which is also closely linked to sustainability. More and more buyers want to know whether their suppliers are meeting the promised sustainability criteria for their products, also textile products. Consequently, the conference presented various techniques for testing the authenticity of a cotton provided in the finished textile, such as DNA testing, fingerprint analysis technique, marker methods and block-chain processes.

Cotton Quality
In addition to current subjects such as digitalisation and traceability, questions of cotton quality have traditionally been an essential element of the Cotton Conference, which was further reinforced this year with the "Spinners Seminar". The spinning mill seminar, which was carried out by the Cotton Exchange and the Fibre Institute in cooperation with the ITMF and IVGT associations, far exceeded expectations.

More than 70 participants discussed the handling of impurities in supplied cotton in the manufacturing process.
In addition, in a high-level expert session, there was an exchange of the latest research results which determine the future of cotton production and the processing of cotton into innovative products.

Baldwin Technology Company Inc.’s exclusive and innovative Precision Application System—which realizes substantial savings of water, chemistry and energy while increasing productivity—was designed with companies like HanesBrands in mind.

HanesBrands—whose venerable apparel lines include Hanes, Champion, Playtex, Bali and Maidenform, to name a few—has set significant environmental stewardship goals to reduce energy consumption and water use. The company’s recent investment in Baldwin’s Precision Application Systems, with a textile finishing technology that allows for accurate and controlled placement and therefore, reduced use of end-of-line chemicals and water, will help HanesBrands achieve its environmental sustainability goals. Additionally, Baldwin’s groundbreaking application system improves output through greater flexibility, fewer production steps and increased uptime.

Mike Abbott, HanesBrands Global Director of Research and Innovation, said: “Baldwin fulfilled our requirements to provide a solution that optimizes our productivity while reducing our environmental impact.” HanesBrands thoroughly evaluated the technology for eight months in live production conditions with positive results. Abbott continued: “During the evaluation period of the system, we have had outstanding results in productivity increase, and we can clearly see that this technology will make a great contribution to our future efficiency and sustainability savings.”

Peter Hultberg, Chief Commercial Officer at Baldwin, said: “We are honored to partner with one of the world’s strongest apparel brands to help the company achieve not only its business goals, but also its corporate responsibility goals. The trust the HanesBrands team placed in Baldwin and our innovative application technology marks an important milestone for Baldwin and our quest to redefine the standards of sustainable textile finishing.”

The HanesBrands contract includes an option to supply 15 additional Precision Application Systems.