From the Sector

Global energy consumption reached a record high in 2019, following a 40-year trend for rapidly increasing energy demand that was only halted by the Coronavirus pandemic. It’s estimated that more than 80 % of this energy is still generated from fossil fuels that produce CO2 emissions and contribute to climate change. Renewable energy offers a solution to this problem, but saving energy whenever possible is an even more effective approach. That are the motives for Trützschler to develop the intelligent card TC 19i, which sets a new benchmark for energy-efficient carding.

The intelligent Trützschler card TC 19i features the unique T-GO gap optimizer, which continuously and automatically monitors and adjusts the carding gap to an ideal position during production. Innovative drive- and air technology further reduce energy consumption of the TC 19i.

The most energy-intensive elements in a carding machine are the drive, the dust suction process and the compressed air system. Permanent suction is needed to remove dust and cotton waste in key places. Smart optimization of these areas has made the intelligent card TC 19i a benchmark for energy efficiency in carding because it uses less electricity, lower suction pressure and less compressed air than other machines, while providing the highest production rates currently available on the market.

In a head-to-head comparison between the TC 19i and a high-performance card from a competitor, the TC 19i consumed at least 10 % less energy per kilogram of material produced when manufacturing rotor yarn from a cotton and cotton waste mix. The compared energy values included electric power consumption and energy required for suction and compressed air and were measured in both cards at the same production of 180 kg/h. A 10 % reduction in energy per kilogram of sliver produced, as proven here by TC 19i, can have a significant impact on a spinning mill’s profitability; annual savings worth a five-digit sum are frequently possible, depending on factors such as the output of the mill. The customer trial also showed TC 19i’s excellent reliability at the customer’s usual production rate of 180 kg/h, and even demonstrated stable performance at 300 kg/h in the same application. Because the TC 19i with T-GO gap optimizer realizes maximum production rates at no compromise in quality, manufacturers can reduce their energy demand and investment costs drastically: Less machines are needed to achieve the desired output, and energy consumption per production is reduced.

This improvement was made possible by a long and sometimes challenging innovation process involving mathematical models of air flows, as well as flow simulations and prototypes. By combining the final flowoptimized parts in the TC 19i, Trützschler’s experts have developed a card that operates with suction pressure of just -740 Pa and with an air requirement of only 4200 m³/h. This translates into 40 % less energy demand for air technology compared to the latest high-performance competitor model.

As the role of lingerie in fashion and athleisure continues to augment, the desire for garments that will meet a new set of values for contemporary consumer lifestyles will flourish. Iluna Group comes back to Interfilière Paris with an important goal: to relaunch the qualities and dimensions of sustainability.

Iluna’s new path begins with the investment in the renewal of machines, which allow it to fly higher in terms of high-tech developments, quality, definition, effects of yarns and patterns. The journey into the new dimension of responsible quality continues with ad hoc developments in the field of GRS (Global Recycled Standard) certified recycled yarns, aimed at unprecedented effects both in look, in performance and in the hands of fabrics. The cord yarn is a precious yarn with a ROICA™ EF premium stretch yarn core, GRS certified and developed with 50% of pre-consumer waste materials content - double, covered with an equally recycled shiny thread; the bright and translucent is instead to add brilliant effects so far not possible with a GRS yarn.

The printing processes are also born from this constant search for innovation towards new materials and new techniques, becoming more and more sustainable: Global Recycle Standard (GRS)-certified sublimation printing and register printing carrying Global Organic Textile Standard (GOTS) certification.

Since 2014, Iluna Group Srl stands out for braiding together the values of beauty, innovation and responsibility.
The company achieved this with Iluna Lab, a cutting-edge research and development centre where laces are conceived and engineered to become sustainable ingredients for the contemporary wardrobe.
The smart values are attested by the STeP - Sustainable Textile Production by Oeko – Tex® certification for its ethic approach. “We are also the first lace producer to have gained the GRS - Global Recycled Standard for transformed products, and whose products are all certified OEKO-TEX® Standard 100.” Comments Walter Colombo, Technical Director at Iluna Group Srl.
 Moreover, in recognition of the great value of responsible innovation, Iluna Group is now officially a partner of C.L.A.S.S., the international ecohub founded in 2007 by Giusy Bettoni, a reference point in the fashion and textile sector for all those who want to make fashion smarter.

Now the company announces two important collaborations with Néné Paris and NOO, “two booming French brands which have intercepted and share our values and vision for sustainability where beauty and innovation are key”.

Néné focuses on preserving natural resources using only upcycled fabrics or fabrics made with recycled fibers. Each and every step of the production is entirely made in Europe.

French independent designer brand NOO creates exquisite lingerie, timeless ready-to-wear garments and bold cut swimwear and bodysuit for women. The brand pays extreme care to aesthetics and details at every step of the production process, from sourcing materials to waste reduction, choosing factories and using recyclable packagings.

THE S/S 2021 SMART COLLECTION AND STRATEGY: “TEAMING UP IS THE RESPONSIBLE WAY FORWARD”
At Première Vision in Paris, February 11th – 13th Jersey manufacturer TINTEX presents its S/S 2021 collection and a new strategic approach to make the world a better place, a garment at a time in  Hall 5 Booth R50/S43, and Hall 3 Smart Creation Booth S7. “That’s why we decided to update our statement-motto in Naturally Advanced Evolution: a promise and an invitation to work together to develop further collections combining an environment-driven approach with cutting-edge technology.” Says Ricardo Silva, Head of Operations of TINTEX.

“Textile producers and fashion brands should develop their partnership in a much more collaborative way.” Say Says Ricardo Silva, Head of Operations of TINTEX. In a move towards his partners, the company has re-organised its products collection into 4 distinct categories and further evolved its production process in order to guarantee the highest quality and performance of its fabrics and, at the same time, to become more competitive and to allow its clients to orientate better and easily find the most suitable and practical solution. COLLECTION focuses on seasonal proposals while EXPRESSIONS includes a range for all-year-round collections.

THE SS 2021 COLLECTION is imbued with sustainability, innovation and a collaborative attitude. The new range comprises 24 new references built focusing on responsible materials – including recycled or recyclable (100% same raw material), tactile finishes and active performances with smart and cutting-edge technical background. “The main area we developed for the S/S 2021 collection was carefully selected starting from the inputs we had from our partners during some of the most successful collaborations in the past 2 years,” adds Ana Eusebio, designer.

And just to keep the conversation about sharing innovation at best, TINTEX is officially shading the light on its Coating Unit that, thanks to continuous investments, will be able to deliver Naturally Advance Solutions in terms of finishings, not just for TINTEX but also for woven producers that are aligned with the corporate commitment. Come to discover TINTEX portfolio of smartly developed coatings at its booth at Smart Creation, hall 3.

Paris Companies Inc. recently achieved Clean Green re-certification. This re-certification reflects their continued dedication to operational efficiency and sustainability.

Paris Companies Inc. first earned the Clean Green Certification in 2012. Companies that have earned this certification adhere to TRSA-designated water and energy use thresholds and deploy best management practices (BMPs) consistent with the ASTM International environmental laundering standard. Paris Companies’ customers can be assured their uniforms, towels and other reusable linens are washed, dried and finished with processes that maximize sustainability and reduce greenhouse emissions. Clean Green certified operations demonstrate significant commitment to conservation and green operations through these BMPs:

• Recovering heat from drained hot water and heat dispersed from the process of warming water
• Recapturing drained water from rinses for reuse
• Using environmentally friendly detergents
• Removing solids and liquids from wastewater
• Solar energy and energy-efficient lighting
• Recycling programs
• Re-routing trucks to save vehicle fuel
• Spill prevention plans

The Clean Green certification is valid for three years at a time. TRSA inspects laundry facilities seeking certification and approves documentation of their water and energy use and BMP deployment through production reports they submit to auditors during the inspections. TRSA’s certification management protocol includes auditor training by the association’s inspection program administrator.

Schoeller, the global textile solutions manufacturer dedicated to sustainability and innovation for more than 150 years, introduces its new PROEARTH™ collection of biodegradable textiles. The new collection, comprised of bluesign® approved fabrics with biodegradable polyester, will debut as part of its Schoeller FTC (SFTC) line, a joint venture between Schoeller Textil AG and the Taiwanese Formosa Taffeta Co. Ltd., at Premiere Vision Paris, September 17-19, Hall 6, Stand 6J18.

As the founding developer of the bluesign® system, the first activewear and leisurewear manufacturer to receive Oeko-Tex Standard 100 certification, and one of the first companies to sign the UN’s Paris Agreement for climate change, Schoeller continues to be on the cutting edge of sustainable practices, bringing one of the first collections of biodegradable synthetic fabrics to the market. Its most recent development, PROEARTH was created to help offset the more than 16 million tons of textile waste produced in the US alone each year.

Jacket, pant and lining fabrics
The SFTC PROEARTH collection will launch with five, bluesign®-approved fabrics designed for lifestyle, fashion and outdoor categories. Made with virgin polyester that has been optimized for biodegradation and has tested to biodegrade at faster and better rates than competitive offerings, the initial PROEARTH articles available this fall include jacket, pant and lining material qualities with various colour options.

• Empowering fashion with responsible R&D, cutting edge finishing and a Made in Italy design imprint

Paris - “The soul of sustainable fashion is an alchemy, a combined commitment and an act of responsibility”. This is the motto ‘embossed’ in the collections and the values of Italian Converter. At Première Vision, the leading manufacturer celebrates its 25th anniversary and presents E.C.O. KOSMOS, a cross-collection, a brand-new ‘green line’ range’ and a winning formula shining a light on the company’s responsible path and unique ‘blend’ for the fashion of tomorrow.

The acronym E.C.O. stands for Ecologic, Conversion, Optimisation; three unique concepts and values that truly embody Italian Converter DNA: sustainability, transformative process and quality improvement.
For over 25 years, Italian Converter creates high-quality materials for some of the leading fashion and accessories brands. “Made in Italy and sustainability are part of our DNA.” Says Costantino Karazissis, founder of Italian Converter. “We believe that responsible sourcing and processes as well as a deep research into new technology pathways and a market-savvy taste for material design must be the starting point.”

At the core of the company’s responsible alchemy is also the constant research for the perfect balance of 100% Made in Italy materials. “We proudly collaborate with 120 skilled employees producing new hybrid material innovations daily, attracting partnerships from the best high-end brands both in Italy and abroad”.

Toupe and brick red E.C.O. Graffiti (100% linen) on E.C.O. Aurora (cotton and AMNI SOUL ECO®)

E.C.O. KOSMOS is entirely traceable, transparent, 100%made in Italy. The collection walks through a very complete and balanced range sustainable materials - from natural to eco high tech ones- that are transformed, enriched and valued in 9 high-tech cutting-edge innovations thanks to the Italian Converter expertise.
•    The natural line starts from bases of cotton bonded with AMNI SOUL ECO®, an enhanced polyamide 6.6 that degrades within 5 years instead of decades, as other conventional ones do.
•    The stretch innovations start from bases in GRS-certified Newlife™, a cutting-edge premium recycled polyester created using a High-Tech Conversion Model. Thanks to a mechanical process, used plastic bottles are turned into a top-quality polymer and yarn which is 100% traceable and 100% Made in Italy. The whole process takes place within a 100 square km area in Piedmont in Northern Italy.
 
All the references make use only of water-based resins and Standard 100 by OEKO-TEX® certified dying. The result, is resistant and transpiring solutions which come with bold and high-performing features, with a soft touch or even with a silky, yet strong, and enveloping feel. The designs range from rustic to contemporary and nod to jacquard, ‘authentic look’ and ‘drill’ hints. An ideal solution for footwear, apparel and leather goods.

Long story short? No compromises. E.C.O. Kosmos reflects design, innovation and responsible values, as well as 100% Italian Converter know-how.
 
“But this is just the beginning,” adds Karazissis. “The next step we are going to implement in the E.C.O. Kosmos cross-collection is a progressive integration of our triple-expertise, processes and R&D.” A sustainable step forward, a leap woven into a deep expertise a story to-be-continued. For a better future, this is for sure.

Denim Expert Ltd. joined the Fashion Industry Charter for ClimateAction alongside other brands and suppliers.
Denim Expert Ltd. is the first manufacturer in Bangladesh to join the UNFCCC (United Nations Framework Convention on Climate Change) and currently taking climate action in line with the goals established by the Paris Agreement of 2015. The company is limiting their Green House Gas (GHG) emissions supporting the world reaching climate neutrality by 2050.

The United Nations Framework Convention on Climate Change (UNFCCC) is an international environmental treaty, which entered in to force on 21st March 1994, having being ratified by a sufficient number of countries. The ultimate objective of the convention is to stabilize greenhouse gas concentrations in the atmosphere at a level that will prevent dangerous human interference with the climate system.

The parties to the convention have met annually from 1995 in Conferences of the Parties (COP) to assess progress in dealing with climate change. In 1997, the Kyoto Protocol was concluded and established legally binding obligations for developed countries to reduce their greenhouse gas emissions in the period 2008–2012. The 2010 United Nations Climate Change Conference produced an agreement stating that future global warming should be limited to below 2.0°C relative to the pre-industrial level. In 2015 the Paris Agreement was adopted, governing emission reductions from 2020 onwards, through commitments of countries in Nationally Determined Contributions, lowering the target to 1.5°C. The Paris Agreement entered into force on 4 November 2016.

• Italian expertise, research and green innovation.
• METALBOTTONI ups the stakes with one-of-a-kind interpretations, to enhance its market presence.

At Première Vision Accessories (Paris, 19-21 September) the company presents the new collection VÀNITA, a mix of leatherwear and sportswear, based on Made in Italy craft, with an increasingly wide and coordinated range.

Based on product experience, combining new trends in accessories. The METALBOTTONI strategy is enriched with product novelties which aim at exploring new existing market segments. A strategy which increasingly leads great artisan production skills to meet constant research and expansion of the range, with the world of sportswear becoming more and more pivotal; without forgetting the important sustainable innovations of the NO IMPACT protocol.

No Impact becomes “Committed Accessories”

The guideline for restyling the METALBOTTONI range over the past two years has been the recent implementation of the NO IMPACT corporate sustainability protocol, which has just acquired a new “dress”, associated with the following pay-off: “Committed Accessories”. It is a way of underscoring the constant green development of the company over the past few years, in terms of process and product: use of recycled raw materials, development of finishing without chemicals, implementation of processes which today have allowed to reduce electricity and water consumption to almost zero.

Moreover the range of NO IMPACT proposals for this season has expanded to include not only new metal finishing but also leather label completely made from processing scrap, thus establishing Metalbottoni as “partner for branding elements” also in terms of sustainability. Pure Made in Italy and constant expansion of collections towards sportswear The great skill in metal processing, which for sixty years now has characterised the top-of-the-range quality of METALBOTTONI products, is now combined with constant research work conducted by our in-house Style Office, resulting in new collections which are more and more in line with the trends emerging from major trade fairs. Maintaining a presence on strong markets (central Europe, Northern Europe and United States), increasing the depth of segments and intercepting new ones. This is the main goal also chosen for the Première Vision Accessories Exhibition where, alongside the autumn-winter 2019/2020 collections, there will be a preview of VÀNITA, the new collection dedicated to leatherwear and more.

METALBOTTONI is proving to be one of the most dynamic companies in the accessory industry.

Over the past two years, in fact, it has introduced numerous product and process innovations, aiming at increasing its range especially as regards sportswear accessories. This trend was driven by a substantial increase in demand by read-to-wear and luxury brands in the past two seasons, and today it means new proposals which account for 35% of the range for METALBOTTONI. New collections have been presented in the past two seasons expressly dedicated to the sportswear world, namely GRAVITA, the first line designed by the company for pressure buttons, and MÀRYA, the new beachwear collection. Also the line called LABORA, the classic collection of accessories for fashion and ready-to-wear has been constantly enhanced with proposals combining style and technical performance. This mix of fashion and sport elements is increasingly evident in the company’s product range, for example in the combination of different materials, using metal with nylon or other resins to create new and unique accessories.

Vànita: beyond leatherwear, a world of accessories

The meeting between fashion, luxury and sportswear has produced VÀNITA, the brand new collection which presents a new approach to accessories dedicated to leatherwear, from an allround perspective from luxury to sportswear. Developed starting from solid product research by the company’s in-house Style Office, VÀNITA is a true meeting of styles and elements, a combination of high product standards with unique elegance. This line introduces one-of-a-kind visions for accessories, exploring highly original pathways dedicated to the world of leather. The VÀNITA proposal ranges from accessories for leatherwear and small leatherwear, to those for shoes, bags and the sportswear worlds. There are two main lines within this collection: one is expressly designed for the world of luxury, the other has a more technical and sporty approach. A true mix between artisan metal processing, based on the great METALBOTTONI expertise in this sector, and “ingredients” such as nylon, rubber finishes or innovative 3D processing, which are often combined together.

“Our goal is to offer an increasingly comprehensive range which allows us to explore new segments on the markets where we are present” - says Gregorio Valli, CEO and President of METALBOTTONI S.P.A – “a ‘recipe’ which should be able to integrate our unmatched product expertise with a constant expansion of our range and continuous implementation of our pathway towards corporate responsibility and sustainability”.

This July at Interfilière, discover responsible innovation and well-being at the ROICA™ booth.

ROICA™ partners create innovative fabrics for the Modern Wardrobe. See, feel, imagine and learn why brands are choosing ROICA™, view the collection of superior functional fabrics that revolutionize the premium stretch market, thanks to advanced yarn solutions dedicated to specific needs of the contemporary consumer.

Spearheading the stretch market, ROICA™ elevates new standards for intelligent contemporary consumers. ROICA™ representatives will excite you as they demonstrate functionality, their advanced color technology system, and show you a fantastic range of stretch innovations from smart shapewear to soft compression that can enhance designs. Come visit the ROICA™ booth to learn about the ongoing commitment to responsible innovation and creativity. As you enter, you will experience 3 Modern Wardrobe concept zones that showcase:

1. ROICA™ Lifestyle – a beautiful selection of commercial lingerie, swimwear and nightwear items from leading brands that include ROICA™, embracing the ROICA™ Eco Smart family of yarns.

2. ROICA™ Innovation – an exciting area that shares our textile partners’ innovations to inspire endless possibilities. This area will showcase lingerie concept garments for brands that will spark ideas for AW 19/20.

3. ROICA™ Lab – the zone that navigates you toward the latest hi-tech Modern Wardrobe solutions. This zone hosts unmatched premium stretch performance designed to exceed contemporary business and consumer desires belonging to ROICA™ Eco-Smart family and ROICA™ Feel Good family .

ROICA™ Eco-Smart family, the world's first range of responsibly made premium stretch fibers creating ROICA™ smart yarns that offer sustainable solutions with prestigious certifications:

• Global Recycling Standard (GRS) Version 3.0 certified by Textile Exchange - ROICA™ Version 3.0 yarn constructed with more than 50% pre-consumer recycled content.
• Cradle to Cradle Certified™ Gold for product and ingredients - ROICA™ yarn evaluated throughout the supply chain for lower impacts on human and environmental health. Striving toward eliminating all toxic and unidentified chemicals for a safe continuous cycle. Hohenstein Environment Compatibility Certificate - ROICA™ proudly breaks down without releasing harmful substances.

ROICA™ partners featuring ROICA™ Eco-Smart family include:
Giemme, Iluna Group S.p.A, Maglificio Ripa S.p.A, M.I.T.I. Spa, Penn Textile Solutions, Sofileta, Tessitura Colombo Antonio Tintex Textiles

ROICA™ Feel Good family, a brilliant range of advanced stretch fibers that deliver personal performance and measurable wellness. Thus, providing freshness and comfort metrics perfect for travel, sport, leisure and more. The family now offers a premium innovation:

• ROICA™ CF, an innovative yarn that neutralizes odors thanks to an active ingredient interlocked within the yarn. This durable stretch yarn offers a fantastic property to every wearer.

ROICA™ partners featuring ROICA™ CF include: Maglificio Ripa S.p.A., TINTEX Textiles.

ROICA™ also presents the following families through our textile partners’ innovations within the ROICA™ Innovation area:

• ROICA™ Color Perfect family - advanced color technology system that delivers a perfect color match finish with an undetectable matte look for the stretch materials.
• ROICA™ Contour family - high performance stretch yarn control that delivers a calibrated form optimizing power, softness and comfort.
• ROICA™ Resistance family - innovations linked to durability and functions to match particular applications including heat and chemical resistance in make and wear.