From the Sector

Reset
569 results
Garments made with conductive threads have the potential to enhance exercise, physiotherapy and rehabilitation Photo University of Bath
Garments made with conductive threads have the potential to enhance exercise, physiotherapy and rehabilitation
22.07.2024

SeamSleeve: Tracking the effectiveness of physiotherapy at home

Everyday clothing may soon be able to capture and record body movements, according to new research published by the Universities of Bath and Bristol.

Harmless low voltages are passed through conductive threads which are stitched into garment seams to create electrical circuits. Their resistance changes with the movement of the wearer's body.
This work opens up new possibilities to make digital clothing which senses and captures movements much more accurately than is possible using current phones and smart watches.

The paper describing the new clothing concept, presented this week at the Designing Interactive Systems (DIS) conference in Copenhagen, lays the foundations for e-textile designers and clothing manufacturers to create cutting-edge garments that could enhance exercise, physiotherapy and rehabilitation.

Everyday clothing may soon be able to capture and record body movements, according to new research published by the Universities of Bath and Bristol.

Harmless low voltages are passed through conductive threads which are stitched into garment seams to create electrical circuits. Their resistance changes with the movement of the wearer's body.
This work opens up new possibilities to make digital clothing which senses and captures movements much more accurately than is possible using current phones and smart watches.

The paper describing the new clothing concept, presented this week at the Designing Interactive Systems (DIS) conference in Copenhagen, lays the foundations for e-textile designers and clothing manufacturers to create cutting-edge garments that could enhance exercise, physiotherapy and rehabilitation.

Paper co-author Dr Adwait Sharma from the Department of Computer Science at the University of Bath said: "Our research focuses on integrating technology into everyday clothing to track the effectiveness of physiotherapy exercises done at home. Doing these exercises correctly to recover from injuries is crucial, but it's difficult to know if you're doing them properly alone.
“SeamSleeve helps address this challenge by enabling physiotherapists to monitor your progress remotely. This technology could be particularly beneficial for conditions like Multiple Sclerosis, where monitoring movement is essential.”

According to Dr Sharma, current fitness trackers often don’t provide enough detail for physiotherapy. SeamSleeve is unique in that it covers the entire arm, allowing it to capture important movement data.

“We’ve successfully developed a working system based on machine learning to track 12 different arm exercises using SeamSleeve,” said Dr Sharma. “This paves the way for exciting future remote physiotherapy and exercise monitoring applications."

Professor Mike Fraser from the University of Bristol’s School of Computer Science added: "We're excited by the opportunity for clothing manufacturers to implement our designs in sleeves and other garment seams.
“We've shown that common overlocked seams in standard garment constructions can do a good job of sensing movement. The design avoids the need for a separate power source by pairing the seam with a charging coil, drawing the energy wirelessly from a mobile phone placed in the pocket.

“This means advanced motion sensing garments could be made without altering existing manufacturing processes.

"We have also shown that smartphone apps using advanced Artificial Intelligence (AI) techniques can use this movement data to match body movement to specific postures or gestures such as physiotherapeutic exercises."

Source:

University of Bath

Foto Hong Kong Polytechnic University
18.07.2024

Hong Kong Polytechnic University develops intelligent activewear

The Paris 2024 Summer Olympic Games are just around the corner and a global sports frenzy is underway. However, intense summer workouts often lead to sportswear absorbing excessive sweat, becoming clingy and cumbersome, causing discomfort and potentially impacting performance. A research team from the School of Fashion and Textiles at The Hong Kong Polytechnic University (PolyU) has developed the iActive™ sportswear range which features a root-like liquid transport system and a skin-like active perspiration dissipater and utilises nature-inspired, anti-heat textile fabrics to expedite sweat removal, effectively reducing the weight and stickiness of activewear caused by sweat accumulation during exercise.

The Paris 2024 Summer Olympic Games are just around the corner and a global sports frenzy is underway. However, intense summer workouts often lead to sportswear absorbing excessive sweat, becoming clingy and cumbersome, causing discomfort and potentially impacting performance. A research team from the School of Fashion and Textiles at The Hong Kong Polytechnic University (PolyU) has developed the iActive™ sportswear range which features a root-like liquid transport system and a skin-like active perspiration dissipater and utilises nature-inspired, anti-heat textile fabrics to expedite sweat removal, effectively reducing the weight and stickiness of activewear caused by sweat accumulation during exercise.

The human body has millions of sweat glands that are vital for regulating body temperature by dissipating sweat for evaporation to cool the skin’s surface. With unabating greenhouse gas emissions, the number of very hot days annually is expected to increase significantly. This will lead to elevated energy consumption and increased sweating during physical activity and outdoor labour. Even when wearing highly breathable clothes with good sweat-wicking properties, individuals may still experience discomfort due to excessive sweat accumulation.

A research team led by Dr SHOU Dahua, Limin Endowed Young Scholar in Advanced Textiles Technologies and Associate Professor of the School of Fashion and Textiles at PolyU, has invented the iActive™, intelligent, electrically activated sportswear with a nature-inspired active perspiration function.

Its nature-inspired technologies, including low-voltage-driven artificial “sweat glands” created by skin-like anti-heat textile fabrics and a root-like branching liquid transport system that aligns with the body’s sweat map, can actively and programmably remove sweat to a perspiration dissipater at the lower region of the sportswear. The all-textile sweat dissipater is compact and operates at a safe output voltage of approximately 5-9V, and its battery is easy to detach from the clothing, making it convenient for users to repeatedly wash the clothing by hand or in a washing machine to maintain hygiene. When the human body’s sweat rate is low, iActive™ can still be used independently without the battery.

Based on the optimised wettability pattern and gradient, the research team utilises a skin-like textile fabric to transport sweat one-way quickly and dissipate it from the inside to the outside. This feature reduces the stickiness and weight of clothing, improves breathability and ensures the garments remain dry and comfortable to wear. Experimental findings indicate that iActive™ creates a breathable and dry skin microclimate by dissipating sweat at a rate that is three times faster than the maximum human sweating rate. This innovation can also prevent discomfort from coldness and moisture after a workout. In comparison to traditional fabrics, the textile materials in iActive™ are 60% lighter and 50% less clingy when soaked, providing the wearer with all-round comfort and enabling sports enthusiasts and athletes to perform at their best.

Furthermore, a mobile app further aids personalised sweat management by wirelessly adjusting the sweat level of iActive™. This innovation is versatile and can be seamlessly integrated into a variety of textile materials to facilitate sustainable mass production. Beyond sportswear, iActive™ is also well-suited to protective clothing and workwear for individuals engaged in prolonged, high-intensity physical labour and outdoor occupations, including healthcare professionals, construction workers, firefighters, law enforcement officers and others, thereby significantly enhancing their work performance.

Dr Shou Dahua stated, “The extreme weather and high temperatures resulting from global warming have elevated the importance of heatstroke prevention and cooling measures on a global scale. Drawing on the vivid phenomena of thermal insulation and directed liquid flow in nature, we aim to foster innovation and sustainable advancement in garment manufacturing by inventing intelligent clothing and materials to address global challenges. We seek to harness the power of technology to infuse fresh perspectives into the traditional clothing industry, thereby enhancing its competitiveness.”

His research team has also developed a premium fabric named Omni-Cool-Dry™, drawing inspiration from volcano dwelling beetles. This fabric not only provides ultra-fast sweat dissipation and ensures all-day comfort with its dry and breathable features under dynamic thermal conditions, but also reflects solar radiation and emits body heat into the cold universe, enabling passive cooling. The team is working hard to leverage the benefits of both inventions to further enhance the sweat-dissipating and cooling capability of iActive™ sportswear.

Dr Shou Dahua, a core member of the PolyU Research Institute for Intelligent Wearable Systems and the Research Centre of Textiles for Future Fashion, has recently been bestowed with the 2023 Distinguished Achievement Award by The Fiber Society for his outstanding contributions to the fields of personal thermal and moisture management, intelligent wearables and soft robotics. The accolade is presented annually to an individual researcher worldwide. He has also received international innovation awards, including consecutive TechConnect Global Innovation Awards in 2021 and 2022. Moreover, his research papers have been published in various internationally renowned academic journals including Science Advances, PNAS, Advanced Functional Materials, and Advanced Energy Materials. Dr Shou will be chairing The Fiber Society Spring 2025 Conference at PolyU.

 

Source:

Hong Kong Polytechnic University

adidas and Juventus: Lunar Inspired 2024/25 Home Kit (c) adidas AG
17.07.2024

adidas and Juventus: Lunar inspired 2024/25 Home Kit

adidas reveals the new Juventus home kit for the 2024/25 season, with a bold, cosmic interpretation of the colours deeply associated with the club. A dynamic interplay of the traditional black and white vertical stripes is given a modern lunar twist, with a subtle all-over crater graphic reflecting the landscape of the moon’s surface.

The kit boasts a unique structured fabric created using a 3D engineering method to construct the jersey in three levels. This layered fabric creates both visual and haptic intrigue when experienced up close, by incorporating textured details that replicate the undulating surface of the moon.

The on-field version of the jersey is constructed with HEAT.RDY technology, using advanced materials to maximize air flow to keep players feeling cool, while the fan version features AEROREADY technology, which uses sweat-wicking or absorbent materials to keep the body feeling dry.

adidas reveals the new Juventus home kit for the 2024/25 season, with a bold, cosmic interpretation of the colours deeply associated with the club. A dynamic interplay of the traditional black and white vertical stripes is given a modern lunar twist, with a subtle all-over crater graphic reflecting the landscape of the moon’s surface.

The kit boasts a unique structured fabric created using a 3D engineering method to construct the jersey in three levels. This layered fabric creates both visual and haptic intrigue when experienced up close, by incorporating textured details that replicate the undulating surface of the moon.

The on-field version of the jersey is constructed with HEAT.RDY technology, using advanced materials to maximize air flow to keep players feeling cool, while the fan version features AEROREADY technology, which uses sweat-wicking or absorbent materials to keep the body feeling dry.

More information:
adidas AG adidas Sportswear
Source:

adidas AG

(c) Messe Frankfurt France
17.07.2024

Final Report of Texworld Apparel Sourcing Paris

The summer edition of Texworld Apparel Sourcing Paris welcomed nearly 1,200 exhibitors from 26 countries. This season event was characterised by a number of new features and the dynamics remained satisfactory. Next event: February 10, 2025, in a partially renovated Paris-Le-Bourget exhibition centre for a session rich in initiatives.

The latest edition of Texworld Apparel Sourcing Paris, offered in its full version with the Avantex and Leatherworld sectors, ended on July 3 with attendance levels down on the July 2023 session. Over and above a possible "Olympic Games effect" and its consequences on transport and accommodation costs in the capital, the current economic situation is prompting the show's organizers to explore all alternatives to adapt the offer to market demand. However, these results do not seem to have had any impact on the flow of business between visitors and exhibitors, who reported a fairly positive overall climate.

The summer edition of Texworld Apparel Sourcing Paris welcomed nearly 1,200 exhibitors from 26 countries. This season event was characterised by a number of new features and the dynamics remained satisfactory. Next event: February 10, 2025, in a partially renovated Paris-Le-Bourget exhibition centre for a session rich in initiatives.

The latest edition of Texworld Apparel Sourcing Paris, offered in its full version with the Avantex and Leatherworld sectors, ended on July 3 with attendance levels down on the July 2023 session. Over and above a possible "Olympic Games effect" and its consequences on transport and accommodation costs in the capital, the current economic situation is prompting the show's organizers to explore all alternatives to adapt the offer to market demand. However, these results do not seem to have had any impact on the flow of business between visitors and exhibitors, who reported a fairly positive overall climate.

The dynamic on the booths remained steady and the exchanges satisfactory, as shown by several manufacturers particularly well established on the European market. Indian shirt manufacturer Sheraton Apparel, for example, made around thirty solid contacts over 3 days, and reported several serious approaches to African distributors. The same goes for SMIT, a Turkish company specialising in Made in Turkey sourcing, which was able to see its main European customers and open up new contacts with Canadian and Brazilian buyers.

An expanded offering
At the Near Sourcing Hub, the phygital sourcing space connected by QR Code to the B2B digital platform of Messe Frankfurt France partner FourSource, inquiries to exhibiting companies remained much the same as in 2023. The visitor profile, on the other hand, focused on buyers from networks of small multi-specialist boutiques looking for an original mid-to-top-range offering. It was in response to this market demand for differentiation that the show organizers decided to extend Apparel Sourcing's range to include new categories in the fashion accessories sector, such as jewelry and bags.

High-profile initiatives
Other innovations were also on show this summer. The yarn pavilion - a first conceived in collaboration with Yarn Expo, originally a Shanghai show run by Messe Frankfurt - showcased the expertise of Chinese, Indian, Pakistani and Taiwanese companies, while at the same time highlighting upstream products and services. At Avantex, where some twenty suppliers of solutions for more sustainable fashion were grouped together, the new Designer Hub enabled designers and buyers to discover some original initiatives, such as that of stylist Jean-Luc François' association, supported by Messe Frankfurt's Texpertise network, which trains people who are far from employment, or the 3D design studio Scotomalab.

Materra wins 2024 Avantex Fashion Pitch award
The Avantex Fashion Pitch jury has awarded the 2024 prize to Materra. This British start-up, founded in 2019, designs solutions to support the cotton cultivation adapted to climate change. At the other end of the chain, it offers brands a service designed on a Cotton-As-A-Service model that encourages them to source from the producers it supports. Materra will benefit from a €2,800 stand at Avantex Paris 2025 donated by Messe Frankfurt France, plus €2,000 from Texpertise Network, the textile sector network of the Messe Frankfurt Group, and 1 year's incubation at Foundry donated by IFA Paris, official partner of the competition.

A trendy area at Leatherworld
New for 2024, the Leatherworld sector inaugurated its Leather Trend area, developed in collaboration with publisher Edizioni AF and the Arsutoria School design centre. Designed around the expertise of Italian companies specialising in the manufacture of leather shoes and bags, this inspirational space presented the autumn-winter 25-26 trends through 4 creative axis built around the expression of simplicity, nature, dynamism (sportswear collections) and finally romanticism. Leather Trend was also an opportunity to discover the new leather tanning technology developed by Ecotan, which avoids the use of metals (Chrome) and chemicals in the leather preparation stages thanks to the use of vegetable tannins.

Source:

Messe Frankfurt France

ISKO to showcase at Kingpins NYC (c) ISKO
17.07.2024

ISKO to showcase at Kingpins NYC

ISKO is taking part in the Kingpins Show in New York City. At the event taking place on 17 and 18 July at Pier 36, Basketball City, ISKO presents a selection from its diverse collections.

Attendees have the opportunity to explore a selection from ISKO’s main collection, alongside some of the company’s most innovative technologies and products. Each piece exemplifies ISKO’s commitment to blending sophisticated designs with sustainable practices.

The Main Collection is organized into five main macro groups:

  • Inflexible: a range of rigid fabrics for contemporary needs, true to denim’s original heritage.
  • Motion: combining comfort and an authentic look for good old rigid denim with freedom of movement.
  • Extended: traditional denim aesthetic and its ultimate stretch expression. Elegance, treatments, and 4-way-stretch technologies.
  • Elite: fabrics families where softness, shine, and silky feel reach their full potential.
  • Momentum: unique finishes, intricate constructions, colored coatings, and special denim features.

Other highlights are:

ISKO is taking part in the Kingpins Show in New York City. At the event taking place on 17 and 18 July at Pier 36, Basketball City, ISKO presents a selection from its diverse collections.

Attendees have the opportunity to explore a selection from ISKO’s main collection, alongside some of the company’s most innovative technologies and products. Each piece exemplifies ISKO’s commitment to blending sophisticated designs with sustainable practices.

The Main Collection is organized into five main macro groups:

  • Inflexible: a range of rigid fabrics for contemporary needs, true to denim’s original heritage.
  • Motion: combining comfort and an authentic look for good old rigid denim with freedom of movement.
  • Extended: traditional denim aesthetic and its ultimate stretch expression. Elegance, treatments, and 4-way-stretch technologies.
  • Elite: fabrics families where softness, shine, and silky feel reach their full potential.
  • Momentum: unique finishes, intricate constructions, colored coatings, and special denim features.

Other highlights are:

  • Casual Line: the premium experience showcasing a versatile and innovative woven fabric collection made with FSC® certified viscose and certified postconsumer recycled polyester.
  • ISKO™ Luxury by PG: curated by Paolo Gnutti, this collection merges classic tastes with contemporary visions.

Finally, as ISKO’s FW 25-26 collection features RE&UP fibers, visitors can learn more about the circulartech company that recycles cotton, polyester and polycotton textile waste and transforms it into high-quality Next-Gen fibers, becoming the go-to alternative to virgin options.

More information:
Isko Kingpins Denim
Source:

ISKO

Hochschule Niederrhein: Ehrung für Textil-Absolventinnen (c) Hochschule Niederrhein
Luisa Verbocket und Prof. Dr. Lutz Vossebein (links), stellvertretender Vorsitzender des Textile and Fashion Network e.V., und der betreuende HSNR-Professor Dr. Thomas Weide
12.07.2024

Hochschule Niederrhein: Ehrung für Textil-Absolventinnen

Für zwei Absolventinnen des Fachbereichs Textil- und Bekleidungstechnik der Hochschule Niederrhein (HSNR) gab es während der Verabschiedungsfeier eine besondere Auszeichnung: Sie erhielten je 1500 Euro Preisgeld für ihre herausragenden Abschlussarbeiten.

Das TFN (Textile and Fashion Network e.V.) ehrt Luisa Verbocket, weitere 1500 Euro stiftet der Verband der Rheinischen Textil- und Bekleidungsindustrie e.V. an Vivien Beckmann.

Luisa Verbocket (26), die nach ihrem Bachelorstudiengang Textil- und Bekleidungstechnik – Textile Technologien an der HSNR den Master Textile Produkte angeschlossen hat, wählte für ihre Abschlussarbeit den Titel „Analyse und Optimierung der Verarbeitung von recycelten Post-Consumer-Textilien an einer Deckelkarde“.
Dabei entwickelte sie unter anderem ein Klassifizierungsschema, mit dem sich die vielen unterschiedlichen Rohstoff-Bestandteile mechanisch recycelter Textilien systematisieren lassen.

In Versuchen an einer Deckelkarde (Kardiermaschine) untersuchte die Mönchengladbacherin die Zusammenhänge zwischen den Maschineneinstellungen, dem Verarbeitungsverhalten der Rohstoffbestandteile und den Produkteigenschaften.

Für zwei Absolventinnen des Fachbereichs Textil- und Bekleidungstechnik der Hochschule Niederrhein (HSNR) gab es während der Verabschiedungsfeier eine besondere Auszeichnung: Sie erhielten je 1500 Euro Preisgeld für ihre herausragenden Abschlussarbeiten.

Das TFN (Textile and Fashion Network e.V.) ehrt Luisa Verbocket, weitere 1500 Euro stiftet der Verband der Rheinischen Textil- und Bekleidungsindustrie e.V. an Vivien Beckmann.

Luisa Verbocket (26), die nach ihrem Bachelorstudiengang Textil- und Bekleidungstechnik – Textile Technologien an der HSNR den Master Textile Produkte angeschlossen hat, wählte für ihre Abschlussarbeit den Titel „Analyse und Optimierung der Verarbeitung von recycelten Post-Consumer-Textilien an einer Deckelkarde“.
Dabei entwickelte sie unter anderem ein Klassifizierungsschema, mit dem sich die vielen unterschiedlichen Rohstoff-Bestandteile mechanisch recycelter Textilien systematisieren lassen.

In Versuchen an einer Deckelkarde (Kardiermaschine) untersuchte die Mönchengladbacherin die Zusammenhänge zwischen den Maschineneinstellungen, dem Verarbeitungsverhalten der Rohstoffbestandteile und den Produkteigenschaften.

Für ihre Masterarbeit kooperierte sie mit der Firma Trützschler, wo sie mittlerweile seit Januar 2024 als Textiltechnologin für den Bereich Recycling und Nachhaltigkeit tätig ist.

Vivien Beckmann aus Kirchhundem im Sauerland entwickelte im Rahmen ihrer Bachelorarbeit für das Unternehmen FALKE eine modulare Outdoor-Jacke. Die 27-Jährige, die an der HSNR den dualen Studiengang Textil- und Bekleidungstechnik mit dem Studienschwerpunkt Produktentwicklung absolviert hat, vereint in ihrem Prototyp einer Outdoor-Jacke Funktionalität mit Design. Für noch mehr Tragekomfort lassen sich je nach Geschmack und Wetterverhältnissen verschiedene Komponenten austauschen, ablegen oder hinzuzufügen.

Die modulare Outdoor-Jacke aus hochwertigen Materialien besteht aus einer Außenjacke und zwei Innenjacken für den Frühling/Sommer und Herbst/Winter. Die Innenjacken können entweder mit der Außenjacke verbunden oder separat getragen werden. Die Außenjacke lässt sich durch Entfernen der Ärmel ganz einfach in eine Weste umfunktionieren sowie die Kapuze abnehmen.

Vivien Beckmann sammelte schon während ihres Studiums im Reisetechniker-Team von FALKE Erfahrungen mit Produktions- und Herstellungsprozessen. Seit ihrem Bachelorabschluss arbeitet sie weiterhin für das Unternehmen.

(c) RadiciGroup
09.07.2024

RadiciGroup: New traceability projects at Milano Unica

A navy blue nylon dress, providing elegance and comfort to the wearer while simultaneously highlighting the entire Made in Italy production chain: this is the new project RadiciGroup is presenting at Milano Unica, from July 9th to 11th at the Innovation Forum promoted by the TexClubTec section of Sistema Moda Italia.

The dress is the result of a traceability project led by RadiciGroup, involving different players in the textile sector: from the yarn producer to the fabric manufacturer to the final consumer.

A "tracer" has been inserted into the yarn, which is detectable through a scanner and allows to map the entire garment creation process - both physically and digitally - from the origin of the fibre to the item end of life. Through a QR code printed on the label, all the "stages" defining the outfit's journey can be seen, including the production of the fabric made by another company from Bergamo, Sitip. In this way, the final consumers can learn more about the production sites of what they wear, making more conscious purchasing choices.

A navy blue nylon dress, providing elegance and comfort to the wearer while simultaneously highlighting the entire Made in Italy production chain: this is the new project RadiciGroup is presenting at Milano Unica, from July 9th to 11th at the Innovation Forum promoted by the TexClubTec section of Sistema Moda Italia.

The dress is the result of a traceability project led by RadiciGroup, involving different players in the textile sector: from the yarn producer to the fabric manufacturer to the final consumer.

A "tracer" has been inserted into the yarn, which is detectable through a scanner and allows to map the entire garment creation process - both physically and digitally - from the origin of the fibre to the item end of life. Through a QR code printed on the label, all the "stages" defining the outfit's journey can be seen, including the production of the fabric made by another company from Bergamo, Sitip. In this way, the final consumers can learn more about the production sites of what they wear, making more conscious purchasing choices.

At the booth of another Italian textile company, Tessitura Vignetta, visitors will be able to touch several types of fabric made with the "traced" nylon produced by RadiciGroup.

This is another example of how important it is to work transparently and collaboratively in the textile supply chain. Through the traceability of textile products, the goal is to fight counterfeiting and enhance products made in Europe, in line with the principles of the Digital Product Passport under development at the European Union.

Source:

RadiciGroup

Freudenberg Apparel: Shirt interlining series made of rPET (c) Freudenberg Performance Materials
Freudenberg Apparel´s rPET interlining solution 99xx
03.07.2024

Freudenberg Apparel: Shirt interlining series made of rPET

Freudenberg Performance Materials Apparel launches the complete RCY 99xx series recycled polyester (rPET) shirt interlinings. This product line serves as a sustainable counterpart to Freudenberg's renowned 95xx series, which has been a staple in the industry for over twenty years.

The 95xx series, celebrated for its unique bi-elastic properties, has earned its place as one of Freudenberg Apparel's most sought-after shirt interlining ranges.

Now, taking a leap towards sustainability, Freudenberg Apparel introduces the complete RCY 99xx series. Crafted from rPET, these bi-elastic interlinings are designed to complement an array of contemporary fabrics, including pure cotton, T/C, flannel, oxford, cotton & linen blends, seersucker, jersey, and all types of stretch knits. The RCY 99xx series not only preserves the natural hand-feel, texture, and shape of these fabrics but also infuses a fresh creative dimension into shirt design.

Freudenberg Performance Materials Apparel launches the complete RCY 99xx series recycled polyester (rPET) shirt interlinings. This product line serves as a sustainable counterpart to Freudenberg's renowned 95xx series, which has been a staple in the industry for over twenty years.

The 95xx series, celebrated for its unique bi-elastic properties, has earned its place as one of Freudenberg Apparel's most sought-after shirt interlining ranges.

Now, taking a leap towards sustainability, Freudenberg Apparel introduces the complete RCY 99xx series. Crafted from rPET, these bi-elastic interlinings are designed to complement an array of contemporary fabrics, including pure cotton, T/C, flannel, oxford, cotton & linen blends, seersucker, jersey, and all types of stretch knits. The RCY 99xx series not only preserves the natural hand-feel, texture, and shape of these fabrics but also infuses a fresh creative dimension into shirt design.

The RCY 99xx series boasts an weight range of 30-150 g/m2, offering versatility for a diverse spectrum of shirt styles, from men’s casual shirts and women's blouses to polo shirts, sports shirts, and denim shirts. This adaptability ensures that designers and manufacturers have the flexibility to meet the evolving demands of the market while upholding sustainability principles.

Source:

Freudenberg Performance Materials Holding GmbH

03.07.2024

Circ Launches Circ-Ready Community

Circ®, a US-based textile-to-textile recycling innovator, announced the launch of Circ®-Ready, an exclusive community of global supply-chain partners who have demonstrated their ability to make high-quality, better-for-the-planet solutions for fashion brands using Circ materials. The inaugural Circ-Ready partners include AGI Denim, Foshan Chicley Textile Co., Ltd., Giotex, Marubeni Corporation, MAS Holdings, PYRATEX®, Selenis, SHINJINTEX, Soorty Denimkind, Tainan Spinning Co., Ltd., and Taiwan Textile Research Institute (TTRI).

The Circ-Ready community is a selected group of partners who have a proven positive track record and commitment to working with Circ recycled products and have been individually evaluated for industry success. Circ-Ready partners work alongside the Circ team of experts to adequately test and utilize Circ fibers, exceeding quality standards from end to end. To promote transparency and ensure the integrity of Circ products, each Circ-Ready partner provides a commitment to relevant best-in-class certifications for recycled products.

Circ®, a US-based textile-to-textile recycling innovator, announced the launch of Circ®-Ready, an exclusive community of global supply-chain partners who have demonstrated their ability to make high-quality, better-for-the-planet solutions for fashion brands using Circ materials. The inaugural Circ-Ready partners include AGI Denim, Foshan Chicley Textile Co., Ltd., Giotex, Marubeni Corporation, MAS Holdings, PYRATEX®, Selenis, SHINJINTEX, Soorty Denimkind, Tainan Spinning Co., Ltd., and Taiwan Textile Research Institute (TTRI).

The Circ-Ready community is a selected group of partners who have a proven positive track record and commitment to working with Circ recycled products and have been individually evaluated for industry success. Circ-Ready partners work alongside the Circ team of experts to adequately test and utilize Circ fibers, exceeding quality standards from end to end. To promote transparency and ensure the integrity of Circ products, each Circ-Ready partner provides a commitment to relevant best-in-class certifications for recycled products.

Consisting of processors, manufacturers, and other vital industry players across tiers 1-4, each Circ-Ready partner has undergone a testing process to replace virgin inputs with Circ’s products, proving the ability to utilize Circ products in their existing operations and produce premium materials as a result. Being a member of the Circ-Ready community provides partners the opportunity to work with pilot-stage Circ products, receive ongoing support from Circ’s technical experts, and be among the first recommended by Circ when brands and partners seek to utilize Circ material.

Circ is a leader in blended textile-to-textile recycling, a known challenge for the industry. Each year, tens of millions of tons of polycotton textile waste is landfilled or burned because existing recycling solutions cannot separate the plastic from the natural fiber and recover both materials. Circ’s innovative recycling technology is the only platform to successfully separate polycotton blended textile waste and recover both cellulosic and synthetic fibers. Circ’s primary fiber outputs are regenerated Circ Lyocell and Circ Polyester from textile waste.

 

Source:

Circ

The partners at the BioFibreLoop kick-off event. Photo: DITF
The partners at the BioFibreLoop kick-off event.
01.07.2024

BioFibreLoop has been started

The German Institutes of Textile and Fiber Research Denkendorf (DITF) are coordinating the research project, which is funded as part of the European Union's Horizon Europe research and innovation program. The aim of BioFibreLoop is to develop recyclable outdoor and work clothing made from renewable bio-based materials. The kick-off event took place in Denkendorf on June 26 and 27, 2024.

The textile industry is facing two challenges: on the one hand, production must become more sustainable and environmentally friendly and, on the other, consumers are expecting more and more smart functions from clothing.

In addition, the production of functional textiles often involves the use of chemicals that are harmful to the environment and health and make subsequent recycling more difficult.

Intelligent innovations must therefore ensure that harmful chemicals are replaced, water is saved and more durable, recyclable bio-based materials are used, thereby reducing the usually considerable carbon footprint of textile products. Digitalized processes are intended to ensure greater efficiency and a closed cycle.

The German Institutes of Textile and Fiber Research Denkendorf (DITF) are coordinating the research project, which is funded as part of the European Union's Horizon Europe research and innovation program. The aim of BioFibreLoop is to develop recyclable outdoor and work clothing made from renewable bio-based materials. The kick-off event took place in Denkendorf on June 26 and 27, 2024.

The textile industry is facing two challenges: on the one hand, production must become more sustainable and environmentally friendly and, on the other, consumers are expecting more and more smart functions from clothing.

In addition, the production of functional textiles often involves the use of chemicals that are harmful to the environment and health and make subsequent recycling more difficult.

Intelligent innovations must therefore ensure that harmful chemicals are replaced, water is saved and more durable, recyclable bio-based materials are used, thereby reducing the usually considerable carbon footprint of textile products. Digitalized processes are intended to ensure greater efficiency and a closed cycle.

For example, the BioFibreLoop project uses laser technology to imitate natural structures in order to produce garments with water and oil-repellent, self-cleaning and antibacterial properties. At the end result of the research work will be affordable, resource and environmentally friendly, yet high-performance and durable fibers and textiles made from renewable sources such as lignin, cellulose and polylactic acid will be available. All processes are aimed at a circular economy with comprehensive recycling and virtually waste-free functionalization based on nature's example. In this way, greenhouse gas emissions could be reduced by 20 percent by 2035.

The technology for the functionalization and recycling of bio-based materials is being developed in three industrial demonstration projects in Austria, the Czech Republic and Germany. At the end of the project, a patented circular, sustainable and reliable process for the production of recyclable functional textiles will be established.

The BioFibreLoop project has a duration of 42 months and a total budget of almost 7 million euros, with 1.5 million going to the coordinator DITF.

The consortium consists of 13 partners from nine countries who contribute expertise and resources from science and industry:

  • German Institutes of Textile and Fiber Research Denkendorf (DITF), Coordinator, Germany
  • Next Technology Tecnotessile Società nazionale di ricerca R. L., Italy
  • Centre Technologique ALPhANOV, France
  • G. Knopf’s Sohn GmbH & Co. KG, Germany
  • FreyZein Urban Outdoor GmbH, Austria
  • BEES - BE Engineers for Society, Italy
  • BAT Graphics Vernitech, France
  • Interuniversitair Micro-Electronica Centrum, Belgium
  • Idener Research & Development Agrupacion de Interes Economico, Spain
  • Teknologian tutkimuskeskus VTT Oy, Finland
  • Det Nationale Forskningscenter for Arbejdsmiljø, Denmark
  • Steinbeis Innovation gGmbH, Germany
  • NIL Textile SRO, Czech Republic
Source:

Deutsche Institute für Textil- und Faserforschung

adidas and New Zealand Rugby celebrate 25 Years of Partnership with new Kit (c) adidas AG
26.06.2024

adidas and New Zealand Rugby celebrate 25 Years of Partnership with new Kit

adidas and New Zealand Rugby reveal their latest jersey designs due to be worn for the 2024 international season. Going back through the archive to the roots of the partnership, adidas designers revisited design elements synonymous with New Zealand Rugby, to craft a shirt 25 years in the making for both the All Blacks and Black Ferns.

Bold in its simplicity, the jersey offers a traditional block-black base adorned with unique silver detailing - selected for its traditional use to mark a 25th anniversary - on an enlarged fern emblem, the adidas logo, and the iconic three stripes which run down both shoulders for the first time. The jersey is punctuated by the return of an all-white collar design; a popular feature seen on some of the most loved New Zealand Rugby jerseys, including the design that saw All Blacks win the 2011 Rugby World CupTM.

Developed based on specific player feedback, the All Blacks version features a double-knit fold over design, while the Black Ferns jersey incorporates a round neck design. For the first time, the Black Ferns and All Blacks are united under a single design, creating a special link between two of the sport’s best teams.

adidas and New Zealand Rugby reveal their latest jersey designs due to be worn for the 2024 international season. Going back through the archive to the roots of the partnership, adidas designers revisited design elements synonymous with New Zealand Rugby, to craft a shirt 25 years in the making for both the All Blacks and Black Ferns.

Bold in its simplicity, the jersey offers a traditional block-black base adorned with unique silver detailing - selected for its traditional use to mark a 25th anniversary - on an enlarged fern emblem, the adidas logo, and the iconic three stripes which run down both shoulders for the first time. The jersey is punctuated by the return of an all-white collar design; a popular feature seen on some of the most loved New Zealand Rugby jerseys, including the design that saw All Blacks win the 2011 Rugby World CupTM.

Developed based on specific player feedback, the All Blacks version features a double-knit fold over design, while the Black Ferns jersey incorporates a round neck design. For the first time, the Black Ferns and All Blacks are united under a single design, creating a special link between two of the sport’s best teams.

The on-pitch jersey is made with a high-performance yarn which contains at least 89% recycled polyester, while the replica jersey is made using 100% recycled polyester. 

More information:
adidas AG Sportswear
Source:

adidas AG

26.06.2024

TrusTrace: Upgraded Forced Labor Prevention Solution

TrusTrace, a SaaS company with a platform for product traceability and supply chain compliance in fashion and retail, announced the launch of its upgraded AI-powered Forced Labor Prevention (FLP) Solution, which will help brands proactively map out supply chains, screen it for risk, and efficiently gather evidence for regulatory compliance.

The Forced Labor Prevention solution combines the power of AI to manage large quantities of data from complex supply chains with scalable collection of primary data per purchase order, which is screened and validated for risk, ensuring brands have validated evidence at a product and shipment level.

TrusTrace, a SaaS company with a platform for product traceability and supply chain compliance in fashion and retail, announced the launch of its upgraded AI-powered Forced Labor Prevention (FLP) Solution, which will help brands proactively map out supply chains, screen it for risk, and efficiently gather evidence for regulatory compliance.

The Forced Labor Prevention solution combines the power of AI to manage large quantities of data from complex supply chains with scalable collection of primary data per purchase order, which is screened and validated for risk, ensuring brands have validated evidence at a product and shipment level.

The solution collects primary data directly from suppliers to ensure detailed and reliable information about facilities, products, and materials. The primary data collected through the TrusTrace solution is specific to the context of the traced products, contrary to solutions leveraging third party data, which can introduce large quantities of irrelevant information from various sources, creating ‘noise’ that can obscure critical insights and quickly become unmanageable. TrusTrace has traced more than two million purchase orders to date and has more than 55,000 suppliers and facilities mapped globally, demonstrating the capacity to automate the collection of primary data at very large scale.

The data is proactively screened for risk against the U.S. Customs and Border Protection (CBP) entity list, and the solution can integrate with any relevant risk screening database.

AI-Powered Chain of Custody Creation and Document Collection drives speed, accuracy and cost savings, making it quick and easy to gain supply chain visibility and stay on top of documentation for compliance. The FLP solution can classify, extract, and translate large volumes of documents in over 100 languages, facilitating the creation of a digital chain of custody, and transforming traditionally time-consuming manual processes, increasing efficiency, and reducing the likelihood of human error.

15 brands worldwide are already using TrusTrace for forced labor prevention, including Vera Bradley, who see proactive supply chain traceability and data management as key in achieving their ESG commitments.

Source:

TrusTrace

10.06.2024

Collaboration between Napapijri and Good Earth Cotton

Lifestyle brand Napapijri has released a range of sustainable summer essentials for men, women and kids, using Good Earth Cotton®.

The partnership between Napapijri and Good Earth Cotton® highlights the brand’s aim to source 100% of its materials from regenerative, responsibly sourced, renewable or recycled sources by 2030. The range includes premium knitwear including T-shirts, polos and more.

Good Earth Cotton is a production system verified as having a positive Net Zero position. The Australian-grown program focuses on regenerative farming that improves soil health, enhances biodiversity and sequesters carbon ensuring that it not only has a neutral impact on the environment but net positive one.

Lifestyle brand Napapijri has released a range of sustainable summer essentials for men, women and kids, using Good Earth Cotton®.

The partnership between Napapijri and Good Earth Cotton® highlights the brand’s aim to source 100% of its materials from regenerative, responsibly sourced, renewable or recycled sources by 2030. The range includes premium knitwear including T-shirts, polos and more.

Good Earth Cotton is a production system verified as having a positive Net Zero position. The Australian-grown program focuses on regenerative farming that improves soil health, enhances biodiversity and sequesters carbon ensuring that it not only has a neutral impact on the environment but net positive one.

One of the most innovative aspects of Good Earth Cotton® is the use of FibreTrace® technology, a real time verification for fibre integrity. Unlike other traceability technologies, FibreTrace® embeds luminescent pigments into the raw cotton, creating a unique signature to verify the fibre and track across the global supply chain. Luminescent pigments are pigments that create physical traceability locked to a scanning device. FibreTrace® also validates the data of the raw cotton fibre and sustainability improvements through the supply chain.

Each product in Napapijri’s Good Earth Cotton® range comes with a QR code on the label which can be scanned to display the products supply chain journey from fibre to store.

Source:

FibreTrace / Good Earth Cotton

adidas and Real Madrid: White Home Kit for 2024/25 Season (c) adidas AG
07.06.2024

adidas and Real Madrid: White Home Kit for 2024/25 Season

adidas unveils the new Real Madrid CF home kit for the 2024/25 campaign, a predominantly white look with subtle detailing.

A crisp white kit has been a trademark look of the club throughout its decorated history; a look adored by the Madridista and worn by some of the greatest players to ever step onto a football pitch. The 2024/25 design is stripped back to the roots of the club, with a minimalistic look and the colour white.

The crafting of the jersey further binds the new kit to the club's DNA, by incorporating a bespoke houndstooth pattern using the initials ‘RM’ throughout the design. adidas utilised a 3D engineering method to construct the jersey in three levels, subtly imbuing the shirt with a layered RM pattern, creating a textured look and feel to add depth and intrigue.

Rounding off the design is a seasonal V-neck collar and minimal black detailing woven through the adidas logo on the shirt, shorts, socks, shirt sponsor and the famous three stripes, which run down the shoulders of the shirt.

adidas unveils the new Real Madrid CF home kit for the 2024/25 campaign, a predominantly white look with subtle detailing.

A crisp white kit has been a trademark look of the club throughout its decorated history; a look adored by the Madridista and worn by some of the greatest players to ever step onto a football pitch. The 2024/25 design is stripped back to the roots of the club, with a minimalistic look and the colour white.

The crafting of the jersey further binds the new kit to the club's DNA, by incorporating a bespoke houndstooth pattern using the initials ‘RM’ throughout the design. adidas utilised a 3D engineering method to construct the jersey in three levels, subtly imbuing the shirt with a layered RM pattern, creating a textured look and feel to add depth and intrigue.

Rounding off the design is a seasonal V-neck collar and minimal black detailing woven through the adidas logo on the shirt, shorts, socks, shirt sponsor and the famous three stripes, which run down the shoulders of the shirt.

The on-field version of the jersey is constructed with HEAT.RDY technology, using advanced materials to maximize air flow to keep players feeling cool, while the fan version features AEROREADY technology, which uses sweat-wicking or absorbent materials to keep the body feeling dry.

More information:
adidas adidas AG Sportswear
Source:

adidas AG

RadiciGroup with Radilon Chill-fit at Phygital Sustainability Expo (c) RadiciGroup
07.06.2024

RadiciGroup with Radilon Chill-fit at Phygital Sustainability Expo

RadiciGroup participated in the fifth edition of Phygital Sustainability Expo, an event dedicated to the ecological transition of fashion and design brands through technological innovation, which was held in Rome on 4 and 5 June.

During the narrated fashion show, held ion the 4th of June in the evocative archaeological site of the Imperial Forum Museum, RadiciGroup presented a jumpsuit. The jumpsuit is made of Radilon Chill-fit, an innovative nylon yarn - made by RadiciGroup in its production sites with low environmental impact. It guarantees thermal regulation and ensures freshness and comfort throughout the day. The jumpsuit worn during the day can quickly turn into the "basis" of an elegant evening outfit by simply adding a kimono-dress, made in nylon, to ensure complete future recyclability.

RadiciGroup participated in the fifth edition of Phygital Sustainability Expo, an event dedicated to the ecological transition of fashion and design brands through technological innovation, which was held in Rome on 4 and 5 June.

During the narrated fashion show, held ion the 4th of June in the evocative archaeological site of the Imperial Forum Museum, RadiciGroup presented a jumpsuit. The jumpsuit is made of Radilon Chill-fit, an innovative nylon yarn - made by RadiciGroup in its production sites with low environmental impact. It guarantees thermal regulation and ensures freshness and comfort throughout the day. The jumpsuit worn during the day can quickly turn into the "basis" of an elegant evening outfit by simply adding a kimono-dress, made in nylon, to ensure complete future recyclability.

The outfit is the result of the collaboration between RadiciGroup and the designer Anita Bertini, a young designer at POLI.Design (an international reference for postgraduate training at Politecnico di Milano): the goal is to propose a wardrobe made of essential, durable and recyclable garments, which offer endless possibilities of matching without ever compromising personal style and commitment to a better world.

Two companies from the Italian textile scenario collaborated on this project as technical partners: Calzificio Argopi for the creation of the jumpsuit and Erco Pizzi for the kimono-dress fabric.

Source:

RadiciGroup

adidas: FW24 London Tennis Collection (c) adidas AG
05.06.2024

adidas: FW24 London Tennis Collection

adidas unveils its FW24 London Tennis Collection – a range of apparel crafted with comfort in mind – including seamless material construction, to help players focus whilst performing in major moments on grass court.

Although a pure-white color spectrum is found across the entire collection, raised structures implemented on the base of select pieces, create the appearance of darker shadows that flow throughout - celebrating the different shades of light seen on a grass court during the summer months.

Supporting the demands of grass court tennis, the collection has been crafted for added mobility, unlocked by adidas’ FreeLift Construction – which incorporates adaptive stretch areas under the arm of each garment, to offer players a greater range of motion.

adidas unveils its FW24 London Tennis Collection – a range of apparel crafted with comfort in mind – including seamless material construction, to help players focus whilst performing in major moments on grass court.

Although a pure-white color spectrum is found across the entire collection, raised structures implemented on the base of select pieces, create the appearance of darker shadows that flow throughout - celebrating the different shades of light seen on a grass court during the summer months.

Supporting the demands of grass court tennis, the collection has been crafted for added mobility, unlocked by adidas’ FreeLift Construction – which incorporates adaptive stretch areas under the arm of each garment, to offer players a greater range of motion.

To help players in the heat of the moment, the collection also includes adidas’ AEROREADY technology, which uses sweat-wicking or absorbent materials to keep players feeling dry. This combines with AIRCHILL for the AIRCHILL FreeLift T-Shirt Pro – an adidas technology that supports players feeling cool through thermally zoned, raised pattern motifs and mesh layers, helping to optimise airflow during high-intensity workouts and matches.

The collection premiers at the summer London tournaments and will be worn by athletes including Caroline Wozniacki, Elina Svitolina, Xinyu Wang, Dana Mathewson, Jessica Pegula, Maria Sakkari, Angelique Kerber, Camila Osorio, Daria Kasatkina, Stefanos Tsitsipas, Alexander Davidovich-Fokina, Felix Auger-Aliassime, Martin de la Puente, Francisco Cerundolo, Jakub Menšík, Alex Michelsen and Luca Nardi.

More information:
adidas Sportswear
Source:

adidas AG

29.05.2024

Traceability New Front Line for Sustainable Retail

Multiple global regulations set to take effect in the coming years have made traceability an imperative for retailers and brands. These include the Digital Product Passport, the Corporate Sustainability Due Diligence Directive, and the New York Fashion Sustainability and Social Accountability Act, to name a few.

While companies are aware of the importance of traceability, research indicates that they are not prepared to comply with upcoming legislation. A recent KPMG survey highlighted that 43% of executives at major enterprises had no visibility or were “largely unclear” about the performance of their Tier 1 suppliers. At the same time, only 28% of companies had clear visibility into Tier 2 suppliers.

TradeBeyond’s recently published Supply Chain Traceability Guide, the latest installment of its Retail Sourcing Report series, highlights the myriad challenges that companies face in implementing effective traceability programs. This report is relevant for all industries, and is especially topical for the apparel and footwear sectors, which are under increasing scrutiny to enhance traceability to ensure sustainability.

Multiple global regulations set to take effect in the coming years have made traceability an imperative for retailers and brands. These include the Digital Product Passport, the Corporate Sustainability Due Diligence Directive, and the New York Fashion Sustainability and Social Accountability Act, to name a few.

While companies are aware of the importance of traceability, research indicates that they are not prepared to comply with upcoming legislation. A recent KPMG survey highlighted that 43% of executives at major enterprises had no visibility or were “largely unclear” about the performance of their Tier 1 suppliers. At the same time, only 28% of companies had clear visibility into Tier 2 suppliers.

TradeBeyond’s recently published Supply Chain Traceability Guide, the latest installment of its Retail Sourcing Report series, highlights the myriad challenges that companies face in implementing effective traceability programs. This report is relevant for all industries, and is especially topical for the apparel and footwear sectors, which are under increasing scrutiny to enhance traceability to ensure sustainability.

The report highlights retail’s slow progress in achieving transparency, as evidenced by the Fashion Transparency Index, which found that the average transparency score across 250 of the world’s largest brands and retailers was just 23%. That suggests that progress on transparent disclosure of social and environmental data is still lagging.
 
The report shows that brands fall short on most key measures of sustainability and traceability, including publishing a responsible code of conduct and providing visibility into their Scope 3 carbon footprint. The United Nations Economics Commission found that only a third of the top one hundred global clothing companies track their own supply chains. One of the obstacles is complexity. More than two-thirds (69%) of fashion companies report that complexity of their global business networks is an obstacle to visibility.

In addition to a lack of visibility, false sustainability claims are also rampant. Greenpeace found that in the apparel and footwear sector, 39% of sustainability claims are false or deceptive. Lack of third-party verification of ESG measures is also rampant.

The highest scoring brands in the 2023 Fashion Transparency Index included luxury brands such as Gucci and retailers such Target Australia, Kmart Australia, OVS, and Benetton. These companies back up their commitment with solid action on multiple measures of traceability.

Along with legislative requirements, consumers are a key driving force pushing companies to improve their traceability initiatives. McKinsey research found that 66% of consumers consider transparency to be a key factor when making a purchase decision and 73% of consumers would pay more for products with transparency into production and sourcing.

The report also highlights key challenges to overcome in the journey to traceability, including effective communication between stakeholders, compliance with new regulations, technology barriers, and data complexity.

On the positive side, the industry is responding with sophisticated technology, including software systems that incorporate artificial intelligence and blockchain-enabled traceability, which provide the required visibility and compliance.

Traceable fiber technology, which allows for traceability from the material origin of a product until its end-life, provides the option of a “fiber-forward” rather than a “product backward” approach to achieving traceability.

Aside from the regulatory and consumer drivers, there is a strong business case for implementing traceability, which includes cost savings, operational efficiency, brand protection and reducing supply chain risk. As such, TradeBeyond expects a rapid evolution in traceability programs across industries, especially in those that lag in best-practices.

While there has been considerable progress in recent years toward accurately tracing the complete origins of products, much more needs to be done. Brands and retailers must intensify their efforts to stay compliant with escalating regulations and align with evolving consumer preferences.

Source:

TradeBeyond

29.05.2024

Teijin Frontier: Breathable, UV-blocking polyester material

Teijin Frontier Co., Ltd., the Teijin Group’s fibers and products converting company, announced the development of a new, multifunctional and comfortable polyester material that combines high breathability and UV protection. This new product reproduces the structure of a traditional Japanese "Sudare" blind (bamboo blind), which allows breezes to pass through while blocking out sunlight.

As extremely high summer temperatures become increasingly common, Teijin Frontier developed this new polyester to meet market demands for materials with enhanced heat protection functions. Heat protection encompasses breathability, UV resistance and anti-stickiness. However, until now, breathability – achieved by gaps between fibers – and UV protection were thought to be mutually exclusive.

To solve this dilemma, the company created a structure with slit-shaped, highly breathable areas in either the warp or weft direction of the fabric. These three-dimensional gaps, similar to those in a bamboo blind, allow the material to deliver both excellent breathability and high UV blocking performance of 85 percent or more. The structure allows air permeability of 50㎤/㎠・s or more.

Teijin Frontier Co., Ltd., the Teijin Group’s fibers and products converting company, announced the development of a new, multifunctional and comfortable polyester material that combines high breathability and UV protection. This new product reproduces the structure of a traditional Japanese "Sudare" blind (bamboo blind), which allows breezes to pass through while blocking out sunlight.

As extremely high summer temperatures become increasingly common, Teijin Frontier developed this new polyester to meet market demands for materials with enhanced heat protection functions. Heat protection encompasses breathability, UV resistance and anti-stickiness. However, until now, breathability – achieved by gaps between fibers – and UV protection were thought to be mutually exclusive.

To solve this dilemma, the company created a structure with slit-shaped, highly breathable areas in either the warp or weft direction of the fabric. These three-dimensional gaps, similar to those in a bamboo blind, allow the material to deliver both excellent breathability and high UV blocking performance of 85 percent or more. The structure allows air permeability of 50㎤/㎠・s or more.

This new product also offers sustainability benefits through the incorporation of recycled polyester in part. Its structure and elastic fibers provide stretch performance, while an uneven surface caused by differences in thread shrinkage and its structure avoid stickiness. Moreover, to achieve the combination of functions, Teijin Frontier also adopt special high-shrinkage technology and dying finishing technology. This material offers potential for use in both fashion and casual clothing.

Teijin Frontier will begin promoting this product for the 2025 spring and summer fashion and casual clothing collections in Japan, aiming for sales of 250,000 meters in fiscal 2024 and 750,000 meters in fiscal 2027.

Source:

Teijin Limited

Source Fashion targets new sourcing regions (c) Source Fashion by Hyve Group
27.05.2024

Source Fashion targets new sourcing regions

Source Fashion, which takes place at Olympia London from 14th - 16th July 2024, continues to grow its presence of international exhibitors from new sourcing regions, including representation from southeast Asia and Africa.

The first Malaysian manufacturer to be represented at the trade fair is Kualesa Apparel. Kualesa started as a small seed of an idea, with a big ambition and an even bigger purpose. The brand has evolved from a simple set of values to a producer of great-looking and comfortable bamboo apparel that’s challenging fast fashion. Kualesa offer flexible MOQ’s ranging from 250 pieces to high production capacity of 50,000 pieces a month.

Fairs and More Inc from the Philippines returns to the show for a third time, bringing a pavilion of Filipino manufacturers and makers.

The show also welcomes its first ever Nigerian manufacturer, Beyond Clothing. Beyond Clothing is a garment factory, that specialises in crafting premium custom clothing, branded uniforms, corporate uniforms, and sublimated t-shirts. The range also includes promotional apparel, workwear, and PPE personal protective apparel for hospitals.

Source Fashion, which takes place at Olympia London from 14th - 16th July 2024, continues to grow its presence of international exhibitors from new sourcing regions, including representation from southeast Asia and Africa.

The first Malaysian manufacturer to be represented at the trade fair is Kualesa Apparel. Kualesa started as a small seed of an idea, with a big ambition and an even bigger purpose. The brand has evolved from a simple set of values to a producer of great-looking and comfortable bamboo apparel that’s challenging fast fashion. Kualesa offer flexible MOQ’s ranging from 250 pieces to high production capacity of 50,000 pieces a month.

Fairs and More Inc from the Philippines returns to the show for a third time, bringing a pavilion of Filipino manufacturers and makers.

The show also welcomes its first ever Nigerian manufacturer, Beyond Clothing. Beyond Clothing is a garment factory, that specialises in crafting premium custom clothing, branded uniforms, corporate uniforms, and sublimated t-shirts. The range also includes promotional apparel, workwear, and PPE personal protective apparel for hospitals.

Returning to Source Fashion, Texpro Corp (a branch of Kassab Group) from Tunisia has grown rapidly to become a fully integrated apparel manufacturer certified with GOTS, BSCI, BCI, and OCS covering the complete production cycle focusing on sustainability through the process from fabrics to manufacturing, washing and dying. The company specialises in denim and flat garment manufacturing and the product portfolio includes casual dresses, shirts, jackets, pants and coats for men, women and kids. Texpro Corp are increasingly partnering with customers to ensure high consistent quality on the products and invest in innovation to help improve the environmental impact by consistently delivering responsibly produced products.

Visitors will also discover International Trade Center (ITC), who is returning with a pavilion that includes a debut area for Ghanian producers. With manufacturing in Ethiopia, Shints Co Ltd. is a global producer of high-performance outdoor clothing and camping equipment.

A strong contingency from Europe includes over 25 UK exhibitors, representation from France, Italy and Spain, and a selection of Portuguese exhibitors including Ttantos Textiles, FLM Textil, SMSenra and Lagofra.

Nearly 30 countries, including Peru, Cambodia, Pakistan, Hong Kong, Italy, and Greece will be represented. Large pavilions from China, India and Turkey have also been confirmed, as well as Tanzania, Madagascar and Nepal.

More information:
Source Fashion Asia Africa
Source:

Source Fashion by Hyve Group

TrusTrace launches Playbook for fashion industry (c) TrusTrace
24.05.2024

TrusTrace launches Playbook for fashion industry

TrusTrace, a global SaaS company with a market-leading platform for supply chain traceability and compliance in fashion and retail, announced the launch of its third playbook entitled, “Unlocking DPP: The Why, What and How of Digital Product Passports.”

Unveiled at the Global Fashion Summit in Copenhagen, the playbook offers a guide for fashion industry professionals grappling with the data collection and implementation of the widely anticipated Digital Product Passport, which will come into force in the European Union between 2026-2030. The book busts some common myths and misconceptions about the DPP, and offers a data protocol for brands to follow to start collecting DPP data and setting up their digital systems for DPP implementation.

TrusTrace, a global SaaS company with a market-leading platform for supply chain traceability and compliance in fashion and retail, announced the launch of its third playbook entitled, “Unlocking DPP: The Why, What and How of Digital Product Passports.”

Unveiled at the Global Fashion Summit in Copenhagen, the playbook offers a guide for fashion industry professionals grappling with the data collection and implementation of the widely anticipated Digital Product Passport, which will come into force in the European Union between 2026-2030. The book busts some common myths and misconceptions about the DPP, and offers a data protocol for brands to follow to start collecting DPP data and setting up their digital systems for DPP implementation.

The guide, which has been authored by journalist Brooke Roberts-Islam, opens with ‘The Why’ of the DPP, breaking down the complex set of incoming EU legislation, and explaining why DPP is an essential tool for achieving the EU’s legally-binding commitment to reach net-zero greenhouse gas emissions by 2050. The guide highlights the significant data gaps and how the DPP will address these by collecting and sharing circularity data.

‘The What’ section explains the three core components of the DPP: product data, unique identifiers and the required interoperable IT system (for decentralized data sharing). This section also offers a breakdown of who and what is in scope, along with the required data systems. ‘The When’ offers all brands an essential overview of the DPP timeline and requirements for textile products under the ESPR.

‘The How’ provides brands with the essential steps to successfully collect data and implement a DPP scheme. The insights in this chapter are derived from the Trace4Value project, a live DPP pilot led by TrusTrace to test an end-to-end DPP data and system infrastructure for textile products entering the EU market. The pilot cohort embedded DPP carriers with live data into selected Kappahl and Marimekko products, which launched on the market in early 2024.

Source:

TrusTrace