From the Sector

Reset
12 results
14.10.2021

Monforts: Automated finishing at Knopf’s Sohn

Knopf’s Sohn, a contract finisher of technical textiles, has installed a fully automated Montex stenter at its plant in Helmbrechts, Germany.
Knopf’s Sohn is processing technical textiles for the automotive, aerospace, home furnishings and workwear markets, based on wool, cellulose, polyamide and polyester fabrics, along with elastane blends, in weights of 80-800gsm.

The Montex machinery range is constantly being upgraded to meet evolving customer needs for greater automation, ease of operation and energy optimisation. The latest ten chamber line at Knopf’s Sohn, with a working width of up to 2.0 metres, was engineered to specific requirements in order to accelerate the company’s move to fully automatic control of its production, and high scaffolding was required for its installation.

The line benefits from two integrated ECO Booster modules to provide high energy savings. These compact, air-to-air heat exchangers, installed within the roof structure of the line, exploit energy from the exhaust gas to preheat up to 60% of the incoming fresh air entering the stenter.

Knopf’s Sohn, a contract finisher of technical textiles, has installed a fully automated Montex stenter at its plant in Helmbrechts, Germany.
Knopf’s Sohn is processing technical textiles for the automotive, aerospace, home furnishings and workwear markets, based on wool, cellulose, polyamide and polyester fabrics, along with elastane blends, in weights of 80-800gsm.

The Montex machinery range is constantly being upgraded to meet evolving customer needs for greater automation, ease of operation and energy optimisation. The latest ten chamber line at Knopf’s Sohn, with a working width of up to 2.0 metres, was engineered to specific requirements in order to accelerate the company’s move to fully automatic control of its production, and high scaffolding was required for its installation.

The line benefits from two integrated ECO Booster modules to provide high energy savings. These compact, air-to-air heat exchangers, installed within the roof structure of the line, exploit energy from the exhaust gas to preheat up to 60% of the incoming fresh air entering the stenter.

The use of a single ECO Booster unit has been calculated to save up to 35% in energy costs, based on fixation processes. Fully automatic operation, set at the Monforts Qualitex control unit, ensures there is no additional burden on the machine operator.

The line is powered by Exxotherm indirect heating, which practically eliminates the yellowing which can be experienced during the treatment of certain polyamide and elastane-based fabrics, and is also equipped with a Conticlean circulating air filter system for constant high drying capacity.

Software
The latest Qualitex visualisation software offers operators reliability and easy control with its full HD multi-touch monitor and slider function, dashboard function with individual adaptation to operating states and faster access to comprehensive recipe data management.

With the Monformatic control system, the exact maintenance of the dwell time in combined treatment processes (drying and heat-setting) can be monitored. When the heat-setting point is reached, the fan speed is automatically adjusted, keeping energy consumption fully under control.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

ANDRITZ receives order for an elliptical cylinder pre-needler (c) ANDRITZ
Elliptical cylinder pre-needler during assembly
19.04.2021

ANDRITZ receives order for an elliptical cylinder pre-needler

International technology Group ANDRITZ has received an order from Amarande SAS to supply an elliptical cylinder pre-needler for their plant in Lussac les Châteaux, France. This machine will process shoddy and natural fibers for the production of heavy felts. Installation and start-up of the machine are scheduled for the second quarter of 2021. The new needlepunch production line with the high-performance ANDRITZ cylinder pre-needler will allow Amarande to offer high-quality products and thus open up new market opportunities.

ANDRITZ offers a complete range of elliptical cylinder pre-needlers serving different weights, widths, speeds and punching capacity. Over the years they have become a must for production of heavy products, special applications and also for demanding applications like automotive. They are a key success factor in enabling the subsequent needling machines to process heavy batts smoothly and control the progressive draft through the consolidation process.  

International technology Group ANDRITZ has received an order from Amarande SAS to supply an elliptical cylinder pre-needler for their plant in Lussac les Châteaux, France. This machine will process shoddy and natural fibers for the production of heavy felts. Installation and start-up of the machine are scheduled for the second quarter of 2021. The new needlepunch production line with the high-performance ANDRITZ cylinder pre-needler will allow Amarande to offer high-quality products and thus open up new market opportunities.

ANDRITZ offers a complete range of elliptical cylinder pre-needlers serving different weights, widths, speeds and punching capacity. Over the years they have become a must for production of heavy products, special applications and also for demanding applications like automotive. They are a key success factor in enabling the subsequent needling machines to process heavy batts smoothly and control the progressive draft through the consolidation process.  

Established in 1990, Amarande is an important French producer of nonwovens, specialized in the production of felt and wadding from recycled textile and natural fibers (wool, cotton, hemp, flax, jute, etc.). The company operates in various markets such as furniture, green spaces, horticultural crops, and insulation.

Source:

ANDRITZ AG

14.01.2021

Hologenix and Kelheim Fibres launch Celliant Viscose

Hologenix, creators of Celliant®, infrared responsive technology, and Kelheim Fibres, a world-leading manufacturer of viscose specialty fibers, have partnered to launch Celliant Viscose at ISPO Munich 2021. Celliant Viscose is a finalist in Best Products by ISPO and will be showcased in the Fibers & Insulations Category for ISPO Textrends, where realistic views and 3-D simulations will be available for each material.

The introduction of nature-based Celliant Viscose will be the first in-fiber infrared sustainable solution on the market and meets a consumer demand for more environmentally friendly textiles. An alternative to synthetic fibers and extremely versatile, Celliant Viscose blends beautifully with cotton, micromodal, lyocell, wool varieties including cashmere. It also has many applications across industries as it is ideal for performance wear, luxury loungewear, casual wear and bedding.

Hologenix, creators of Celliant®, infrared responsive technology, and Kelheim Fibres, a world-leading manufacturer of viscose specialty fibers, have partnered to launch Celliant Viscose at ISPO Munich 2021. Celliant Viscose is a finalist in Best Products by ISPO and will be showcased in the Fibers & Insulations Category for ISPO Textrends, where realistic views and 3-D simulations will be available for each material.

The introduction of nature-based Celliant Viscose will be the first in-fiber infrared sustainable solution on the market and meets a consumer demand for more environmentally friendly textiles. An alternative to synthetic fibers and extremely versatile, Celliant Viscose blends beautifully with cotton, micromodal, lyocell, wool varieties including cashmere. It also has many applications across industries as it is ideal for performance wear, luxury loungewear, casual wear and bedding.

Celliant Viscose features natural, ethically sourced minerals embedded into plant-based fibers to create infrared products that capture and convert body heat into infrared, increasing local circulation and improved cellular oxygenation. This results in stronger performance, faster recovery and better sleep.

Celliant Viscose provides all the benefits of being a viscose fiber — lightweight, soft, highly breathable, excellent moisture management — as well as fiber enhancements from Celliant infrared technology. Celliant’s proprietary blend of natural minerals allows textiles to capture and convert body heat into full-spectrum infrared energy, resulting in stronger performance, faster recovery and better sleep. In addition, Celliant is durable and will not wash out, lasting the useful life of the product it powers.

An Affordable, Long-lasting Solution with Diverse Applications
As opposed to other IR viscose products which are coatings based, Celliant Viscose’s in-fiber solution increases wearability and longevity with a soft feel, durability from washing and longer life. The combination of Kelheim’s distinctive technology and the Celliant additives creates this unique fiber that provides full functionality without the need for any additional processing step — a new standard in the field of sustainable IR viscose fibers. This single processing also makes Celliant Viscose more cost-effective and time-efficient than coatings.

In addition, Kelheim’s flexible technology allows targeted interventions in the viscose fiber process. By modifying the fiber’s dimensions or cross sections or by incorporating additives into the fiber matrix, Kelheim can precisely define the fiber’s properties according to the specific needs of the end product.

Highly Sustainable
Celliant Viscose is a plant and mineral-based solution for brands seeking an alternative to synthetic fibers. It contains natural raw materials that are from the earth and can return safely to the earth.

Nature-based Celliant Viscose is certified by FSC® or PEFC™, which guarantees the origin in sustainably managed plantations, and is part of the CanopyStyle initiative to protect ancient and endangered forests. The production of Celliant Viscose takes place exclusively at the Kelheim facilities in Germany, complying with the country’s strict environmental laws and guaranteeing an overall eco-friendly product.

Backed by Science
Celliant is rigorously tested by a Science Advisory Board composed of experts in the fields of physics, biology, chemistry and medicine. The Science Advisory Board has overseen 10 clinical, technical and physical trials, and seven published studies that demonstrate Celliant’s effectiveness and the benefits of infrared energy.

For more information, visit www.celliant.com/celliant-viscose/

Source:

Kelheim Fibres GmbH

Huntsman Textile Effects Delivers Sustainable Solution For Wool Dyeing: Lanasol® Ce Dyes, The Effective Alternative To After- Chrome Dyes (c) Huntsman Corporation
LANASOL® CE
02.09.2020

Huntsman Textile Effects Delivers Sustainable Solution For Wool Dyeing: Lanasol® Ce Dyes, The Effective Alternative To After- Chrome Dyes

Optimum wool dyeing solution aligned to ZDHC MRSL standards

Singapore – Huntsman Textile Effects’ LANASOL® CE dyes, provide the industry with the sustainable alternative to after-chrome dyes for wool. LANASOL® CE dyes offer a consistent, safe and reliable dyeing process that can effectively replace chrome dyes for wool. This helps mills conform to ZDHC MRSL standards and meet the stringent requirements of global brands and retailers.
The use of Chrome VI, including Dichromate, is banned in the ZDHC Manufacturing Restricted Substances List (ZDHC MRSL). Wool processors working for brands and retailers that have adopted ZDHC MRSL must therefore act quickly to finalize their chrome replacement developments.

Developed by Huntsman Textile Effects specifically to meet these challenges, LANASOL® CE is a state-of-the-art chrome-free dye range that allows mills to discontinue the use of after-chrome dyes. LANASOL® CE outperforms traditional after-chrome dyes across the board – at every level of dyeing and processing.

Optimum wool dyeing solution aligned to ZDHC MRSL standards

Singapore – Huntsman Textile Effects’ LANASOL® CE dyes, provide the industry with the sustainable alternative to after-chrome dyes for wool. LANASOL® CE dyes offer a consistent, safe and reliable dyeing process that can effectively replace chrome dyes for wool. This helps mills conform to ZDHC MRSL standards and meet the stringent requirements of global brands and retailers.
The use of Chrome VI, including Dichromate, is banned in the ZDHC Manufacturing Restricted Substances List (ZDHC MRSL). Wool processors working for brands and retailers that have adopted ZDHC MRSL must therefore act quickly to finalize their chrome replacement developments.

Developed by Huntsman Textile Effects specifically to meet these challenges, LANASOL® CE is a state-of-the-art chrome-free dye range that allows mills to discontinue the use of after-chrome dyes. LANASOL® CE outperforms traditional after-chrome dyes across the board – at every level of dyeing and processing.

“LANASOL® CE dyes have always been recognized as the leading brand in the wool industry. Our innovative dyeing auxiliaries and successful dyeing systems with LANASOL® CE provide the highest technical performance, helping customers to protect the natural beauty of wool, achieve water, energy and time savings while rendering chrome dyes obsolete,” said Alessandro Larghi, Global Marketing Manager for Wool at Huntsman Textile Effects.

As a champion of a sustainable textile industry, Huntsman Textile Effects has long been a strong advocate for the shift away from after-chrome dyes. Huntsman Textile Effects first introduced LANASOL® CE in 1997, before the introduction of any regulation on the restricted use of dichromate.

MANTECO Logo NEW GENERATION RECYCLED WOOL by MANTECO
MANTECO Logo
29.01.2020

Manteco presents The Manteco System

The integrated sustainable network making fashion circular, Made in Italy and 100% traceable

World leading textile manufacturer Manteco presents its sustainable path for a better future: The Manteco System. A strategy and a vision shaping the company’s sustainable imprint since 1943. The system consists in the development and engineering of a production network involving 100 partner-companies from the whole supply chain “We all team up responsibly to create premium collection based on transparent , traceable  circular economy practices,” comments Matteo Mantellassi, co-CEO of Manteco.
 
To achieve meeting the demand for fair and sustainable fashion that consumers believe in, and is expected  from our clients, the company and its partners have created and accomplished to a Protocol of Sustainable Values and Commitments in line with the highest standards of the global market.

The integrated sustainable network making fashion circular, Made in Italy and 100% traceable

World leading textile manufacturer Manteco presents its sustainable path for a better future: The Manteco System. A strategy and a vision shaping the company’s sustainable imprint since 1943. The system consists in the development and engineering of a production network involving 100 partner-companies from the whole supply chain “We all team up responsibly to create premium collection based on transparent , traceable  circular economy practices,” comments Matteo Mantellassi, co-CEO of Manteco.
 
To achieve meeting the demand for fair and sustainable fashion that consumers believe in, and is expected  from our clients, the company and its partners have created and accomplished to a Protocol of Sustainable Values and Commitments in line with the highest standards of the global market.

“On a hand, the protocol preserves the unique ‘genius loci’ of our territory – it respects the heritage of all our partners, from the smaller businesses to the more structured ones - on the other hand, it works like a shared compass of sustainable values, allowing the whole supply chain behind Manteco products to stand out and be competitive on the global stage” adds Mantellassi.
 
The protocol and its monitored and traceable system cover virtuous management of resources – e.g. Water, energy and chemical products - waste management and low production impact on the environment but also responsible standards in terms of employment, quality of the working environment, equal rights and anti-discrimination policies.

One of the key  results of such commitment and sustainable development is the creation of an upgraded version of the recycled wool  MWool™: a top ingredient made from premium recycled wool process guaranteed by the Manteco System.The System works like a symphony where management, measurement and controls  are not there just to test  the quality of each single phase of processes or  products , but to make sure and offer the complete traceability of Manteco production.  From raw material, to yarn, spinning, finishing, testing and final fabric.

Some productions tips about Manteco:

  •  5.3 million kg of raw materials processed annually.
  •  6.860 tests on raw material per year.
  •  34.400 tests on finished products.
  •  100% made in Italy system completely based in the Prato district since 1943.
  •  Total transparency and traceability thanks to a highly skilled management system.

With a turnover of over 91m Euro in 2019 and an annual growth of 17,80% since 2012, Manteco SpA is the 4th textile company in Italy, listed in the TOP30 companies of the Italian fashion system. “The unique Manteco system adds value to our products while highlighting the sustainable path we share with all our partners both upstream and downstream”.

More information:
Manteco
Source:

(c) GB Network

ISKO takes the fashion world by storm with ISKO Wild™ ISKO takes the fashion world by storm with ISKO Wild™
ISKO takes the fashion world by storm with ISKO Wild™
23.01.2020

ISKO takes the fashion world by storm with ISKO Wild™

All the glamour of fur meets the technology of responsible ISKO™ denim, for a first-of-its-kind concept that provides fashionable and conscious alternatives to furs and other synthetic imitations.

Over the years, ISKO has set out on a journey of innovative firsts consistently providing what the market had been missing. ISKO Wild™, the latest achievement of this long-lasting enterprise and the first-in-the-world denim fur program, is set to impress the industry and revolutionize fashion.

Resulting from ISKO’s Responsible Innovation™ approach based on creativity, competence, and citizenship, ISKO Wild™ reflects the company’s commitment to making both the world and the industry better. This technology does not harm animals nor does it destroy their home. Unlike other imitation furs, it does not release micro plastics into the environment.

All the glamour of fur meets the technology of responsible ISKO™ denim, for a first-of-its-kind concept that provides fashionable and conscious alternatives to furs and other synthetic imitations.

Over the years, ISKO has set out on a journey of innovative firsts consistently providing what the market had been missing. ISKO Wild™, the latest achievement of this long-lasting enterprise and the first-in-the-world denim fur program, is set to impress the industry and revolutionize fashion.

Resulting from ISKO’s Responsible Innovation™ approach based on creativity, competence, and citizenship, ISKO Wild™ reflects the company’s commitment to making both the world and the industry better. This technology does not harm animals nor does it destroy their home. Unlike other imitation furs, it does not release micro plastics into the environment.

With the claim to inspire and delight the fashion world, stakes are high but the concept is a real hit for it represents the perfect combination of glamorous fashion and conscious responsibility.
Despite attempts of imitations ISKO Wild™ is a one-of-a-kind concept in the industry. Available in both Indigo and RFD, featuring cotton and cotton wool blends, this product stands out from a quality, look and performance standpoint.

More information:
Isko
Source:

(c) menabo Evolutionary Branding

19.07.2018

Industry-leading brands confirmed for September’s Cinte Techtextil China

As the countdown to the 2018 edition of Cinte Techtextil China enters its last two months, the final exhibitor line-up is starting to take shape. A number of leading international and Chinese brands across the fair’s 12 product application areas will feature at the Shanghai New International Expo Centre from 4 – 6 September, with an expected 500-plus total exhibitors from around 20 countries & regions set to feature.

Nonwovens exhibitor highlights

As the fair’s largest product category, buyers have a wide range of domestic and overseas brands to source from, including:

As the countdown to the 2018 edition of Cinte Techtextil China enters its last two months, the final exhibitor line-up is starting to take shape. A number of leading international and Chinese brands across the fair’s 12 product application areas will feature at the Shanghai New International Expo Centre from 4 – 6 September, with an expected 500-plus total exhibitors from around 20 countries & regions set to feature.

Nonwovens exhibitor highlights

As the fair’s largest product category, buyers have a wide range of domestic and overseas brands to source from, including:

  • Johns Manville (US): who will showcase their polyester spunbond, PP & PBT meltblown, glass fibre nonwoven, micro glass fibre nonwoven, hybrid nonwoven, glass fibre needle mat and glass microfibre product lines among others at the fair.
  •  J.H. Ziegler (Germany): with over 150 years’ expertise and their own production plant in China, they offer products for acoustic absorption in automotive interiors and exteriors, nonwoven foam composites for leather lamination, needle-punched nonwovens, foam nonwoven composites, laminated nonwovens and natural-fibre nonwovens.
  • KOBE-cz (Czech Republic): a new exhibitor to the fair, their nonwoven fabrics, mainly made from glass fibre with temperature resistance up to 800°C, are used for high-temperature isolation in the automotive, marine, energy and building industries. They also have isolation materials made from natural fibres including hemp, wool, cotton and flax.
  • TDF Nonwovens (China): one of the leading domestic brands, their specialties are polyester spunbond geotextiles, polyester filament roofing carriers, filter nonwovens, high-strength coarse denier polypropylene spunbond geotextiles and medical & health nonwovens.
  • Kingsafe (China): they specialise in the production of fusible interlining and nonwoven fabrics for high-end garments.

Yarn & fibre exhibitor highlights

  • Perlon (Germany): has developed a PET based monofilament, HighGrip, which guarantees long-lasting efficiency of conveyor belts, and is available in various types with different tribological characteristics, which they will feature at the fair.
  • Sateri (China): is a global leader in viscose rayon made from 100% dissolving wood pulp, and the largest maker of viscose fibre in China. Their natural and high-quality fibre, made from trees grown on renewable plantations, can be found in textiles and skin-friendly hygiene products.
  • Cordenka (Germany): producers of industrial rayon, their product range covers rayon tire cord, yarn, single-end dipped cord, short-cut fibre and more.
  • EMS-Griltech (Switzerland): will showcase a range of technical fibres & yarns and thermoplastic adhesives at the fair.
  • Barnet (Germany): several finished products (nonwovens, spun yarns and fabrics) made with their specialty fibre will be on display at the fair, including OPAN, para-aramid and carbon filament fibres. The application of their specialty fibre in flame retardant and anti-cut gloves and felts will be shown at their booth for the first time.

Coated textiles & solutions exhibitor highlights

  • Stahl (the Netherlands): the Dutch company will present new products from their water repellent and flame retardant ranges at this year’s fair. According to the company, as the Chinese government continues its efforts to clean up the environment, eco-friendly chemicals remain in strong demand in the country.
  • Sioen (Belgium): will showcase sign materials, truck tarpaulins, tents, membrane fabrics, apparel products, chemicals and specialty products such as inflatable boat fabrics, pool liners and more at Cinte 2018.
  • ROWA Lack (Germany): a new exhibitor at this year’s fair, they will present their special lacquer systems and top coatings.
  • Trelleborg (Sweden): also a new exhibitor, they will display engineered textiles, especially in the fields of outdoor, medical, protective and automotive.
  • FPC Technical Textile (Saudi Arabia): another first-time participant at the fair, they will showcase a range of high-end specialty fabrics including PVC coated fabrics and fibre glass PTFE fabrics.
  • Zhejiang Jinda New Materials (China): this supplier is known for its coated textiles for industrial, transportation and building uses, as well as warp knitted geo-synthetic materials and printable coated materials for advertisements.

Lenzing to showcase its new VEOCEL nonwovens specialty brand at the fair

First announced in June this year, and featuring at Cinte Techtextil, Lenzing’s new VEOCEL brand is billed as a premium range of nonwovens fibres for daily care, which “provides the nonwovens industry with fibres that are certified clean and safe, biodegradable, from botanic origin and produced in an environmentally responsible production process.” Products in this range can be applied to a multitude of uses including baby care, beauty and body care, intimate care and surface cleaning, under the VEOCEL Beauty, VEOCEL Body, VEOCEL Intimate and VEOCEL Surface brands.

 

More information:
Cinte Techtextil China
Source:

Messe Frankfurt (HK) Ltd

12.03.2018

Cadira® for Resource Optimized Reactive/Disperse Continuous Dyeing

The DyStar® Group recently launched a new concept of their resource saving module – Cadira Reactive/Disperse Continuous.

Cadira Reactive/Disperse Continuous is a modified pad-dry-thermosol-pad-steam dyeing process for open width PES/CO fabrics. In contrast to the standard PDTPS process, Cadira Reactive/Disperse Continuous does not require a separate reduction clearing process and thus saves more than 40% chemicals, water and energy. This effect is obtained by using a special dye choice of Dianix® XF/XF2 and SF disperse dyes in combination with selected Levafix® and Remazol® reactive dyes and a modified steaming and wash-off process with Sera® auxiliaries.

The Cadira concepts considerably reduce process costs, water, waste and energy consumption and machine utilization. Cadira supports Brands & Retailers and their production partners in their effort to save valuable resources and to reduce the carbon footprint of their textile goods.

The first Cadira module was developed in 2016. Since then DyStar has launched Cadira concepts for various substrates and applications. So far, the following Cadira concepts are available.

The DyStar® Group recently launched a new concept of their resource saving module – Cadira Reactive/Disperse Continuous.

Cadira Reactive/Disperse Continuous is a modified pad-dry-thermosol-pad-steam dyeing process for open width PES/CO fabrics. In contrast to the standard PDTPS process, Cadira Reactive/Disperse Continuous does not require a separate reduction clearing process and thus saves more than 40% chemicals, water and energy. This effect is obtained by using a special dye choice of Dianix® XF/XF2 and SF disperse dyes in combination with selected Levafix® and Remazol® reactive dyes and a modified steaming and wash-off process with Sera® auxiliaries.

The Cadira concepts considerably reduce process costs, water, waste and energy consumption and machine utilization. Cadira supports Brands & Retailers and their production partners in their effort to save valuable resources and to reduce the carbon footprint of their textile goods.

The first Cadira module was developed in 2016. Since then DyStar has launched Cadira concepts for various substrates and applications. So far, the following Cadira concepts are available.

Cadira Polyester
Cadira Recycled Polyester
Cadira Vat
Cadira Reactive
Cadira Procion PX
Cadira Wool
Cadira Denim

DyStar will continue their effort to support the textile industry to reduce the environmental footprint.

About DyStar
DyStar® Group is a solution provider, offering customers across the globe a complete range of colorants, auxiliaries and services. The DyStar Group has offices, competence centers, agencies and production plants in over 50 countries to ensure the availability of expertise in all important markets. With a heritage of more than a century of product development and innovation for the textile and leather industry, DyStar has developed into new markets and now in addition serves the paper, plastic and many other specialty chemical industries.

DyStar’s service division assist brands & retailers and their industry partners from their first inspiration throughout the entire supply chain to ensure that they meet stringent quality and ecological specifications, reduce costs and shorten lead times. The service division offers state of the art color communication through CSI, textile and ecology testing through Texanlab, ecology and environmental advice, supply chain auditing and consulting for RSL compliant sustainable processes through Sustainable Textile Solutions programs.

The DyStar econfidence® program provides assurance that provided products comply with legal, voluntary and brand & retailer RSL (Restricted Substance List) requirements. It is an assurance that our products are in compliance with chemical and environmental legislation in each market in which they are sold.
Visit www.DyStar.com for more information.

 

More information:
DyStar Cadira®
Source:

DyStar

(c) Messe Frankfurt (HK)
05.03.2018

European suppliers at Intertextile Shanghai the go-to option for Chinese buyers seeking quality and style

  • New collaboration of sustainable viscose suppliers formed in China

Digital Printing Zone debuts at Spring Edition
Despite the economic ups and downs in China over the last few years, demand for premium European textiles remains high.
Whether it be premium wool for the flourishing suiting market, ladieswear fabrics, lace & embroidery for high-end domestic brands each with hundreds of stores across the country, innovative yarns & fabrics for the booming sports and activewear sectors, or original pattern designs for the thousands of new online fashion brands, European suppliers remain the go-to option for Chinese buyers looking for quality and style.

  • New collaboration of sustainable viscose suppliers formed in China

Digital Printing Zone debuts at Spring Edition
Despite the economic ups and downs in China over the last few years, demand for premium European textiles remains high.
Whether it be premium wool for the flourishing suiting market, ladieswear fabrics, lace & embroidery for high-end domestic brands each with hundreds of stores across the country, innovative yarns & fabrics for the booming sports and activewear sectors, or original pattern designs for the thousands of new online fashion brands, European suppliers remain the go-to option for Chinese buyers looking for quality and style.

As one of the undisputed leaders in the European textile scene, Italy is always a good bellwether of the trends between Europe and China. After a less than stellar 2016, Italy’s fabric exports to the Mainland China and Hong Kong markets grew by 12.4% in the first 10 months of 2017[1]. The expected demand for European brands at Intertextile Shanghai Apparel Fabrics will be most evident in the SalonEurope zone, which features exhibitors from Austria, France, Germany, Italy, Spain, Switzerland, Turkey and the UK, as well as country pavilions & zones from France, Germany, Italy and Turkey.

There is also continuing demand for overseas expertise when it comes to more technical areas such as sustainability and digital printing, solutions to which can be found in the fair’s All About Sustainability area and Digital Printing Zone.

SalonEurope showcases the continent’s full textile expertise
The best of the best from Europe will be on display in this edition’s SalonEurope, with a range of products across the whole textile spectrum on offer. Some of the highlights this edition include:

  • Alumo (Switzerland): celebrating its 100-year anniversary this July, Alumo has undertaken a complete refresh of their brand, highlighting the character of their mill in Appenzell, Switzerland that has deep roots in the local textile industry. This edition, they will showcase a renewed collection of luxury shirting fabrics with intricate designs and added functions such as natural stretch and wrinkle-free, and a newly enlarged, never-out-of-stock ‘Sartorial’ collection.
  • Hatfil Tekstil Isletmeleri (Turkey): a Turkish-Italian joint venture, they offer a huge range of yarns including eco-friendly options such as organic, BCI and fair trade yarns, as well as cotton, Tencel, Amicor, bamboo, cashmere, modal and other varieties.
  • Hohenstein Textile Testing (Germany): offering testing services, OEKO-TEX® services and certifications, the Hohenstein Quality Label and more.
  • Ricamificio Paolo Italy SpA (Italy): an embroidery manufacturer, they have developed a new technique using very thin embroideries to produce a lace-like effect, which can also be customised to the customer’s requirements in no more than four weeks. They have also produced a quilt-like fabric suitable for spring / summer garments which is made from materials such as silk organdie, cotton yarn or lurex to produce a shiny effect.
  • Teseo Tessitura Serica Di Olmeda SpA (Italy): for their summer 2019 collection, Teseo is inspired by the natural elements with increased attention to sustainability with GOTS-certified bio silk and eco-friendly yarns. New articles are lighter and enriched with yarn-dyes, include jacquard stripes and checks, gauze and devoré bands to add transparency, and more.

New collaboration of sustainable viscose suppliers formed in China
While the textile industry in China still has a long way to go in terms of sustainability, genuine progress is being made at both a government and company level. January of this year saw the implementation of a new environment protection tax, with companies charged for noise, air & water pollution and generating solid waste[2]. Replacing a pollutant discharge fee that had been in place for 40 years, the new tax is set by local governments – with some of the regions suffering from worse pollution setting higher rates – and also incentivises companies with lower emissions.

In another encouraging move, 10 leading global viscose producers in China have come together to form the Collaboration for Sustainable Development of Viscose (CV) to promote the sustainable sourcing and responsible production of viscose. These 10 producers collectively account for over 50% of the world’s viscose staple fibre production, and have partnered with two trade associations to adopt a sustainability roadmap for the viscose industry. Built around credible international sustainability standards and programmes, the CV Roadmap aims to provide guidance to viscose producers on sustainable sourcing and production practices.

The CV collaboration will make its debut appearance in the fair’s All About Sustainability zone, where visitors can learn more about this initiative, as well as sustainable developments in the Chinese textile industry. Apart from an educational programme and garment display area, the zone will also feature a number of exhibitors other than CV.

Digital Printing Zone debuts at Spring Edition
While digital printing is rapidly gaining traction in the global textile industry, this is especially so in China due to its potential to reduce pollution during the production process. Amongst the exhibitors looking to take advantage of this in the fair’s new Digital Printing Zone is MS Italy, a market leader in the design, development and distribution of innovative digital ink-jet printing systems and associated consumables, which serves the high-end, roll-to-roll textile printing and specialty material markets. Also exhibiting is DIGITEX which will introduce the latest digital- and inkjet-printed natural and manmade fabrics.

Apart from digital printing exhibitors, a day-long forum will inform fairgoers on the exciting possibilities of digital printing. Held on day 2 of the fair, the Fast Fashion and Digital Printing Application Forum features sessions on fast fashion technology & trends and digital printing applications. These are followed by a series of discussions on topics such as flexible supply chains, business opportunities created by digital printing and IP protection. The forum also includes a presentation on the findings of a six-month study conducted by Fashion Print, a Chinese publication, for which they visited hundreds of textile companies, printing and dyeing enterprises, as well as their suppliers to produce a research paper on the digital textile printing market and technology.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

  • Intertextile Shanghai Apparel Fabrics – Spring Edition 2018 is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. For more details on this fair, please visit: www.intertextileapparel.com. To find out more about all Messe Frankfurt textile fairs worldwide, please visit: www.texpertise-network.com.

[1] http://hk.fashionnetwork.com/news/Italian-textile-industry-back-on-growth-track-in-2017,944760.html
[2] http://www.fibre2fashion.com/news/textile-news/china-imposes-environment-protection-tax-beginning-jan-1-239965-newsdetails.html

 

Source:

Liam Rodden, Messe Frankfurt (HK)

21.02.2018

Filatura C4 is a Re.Verso™ partner of excellence

For the first time at FILO Milano, Filatura C4 is proud to present, in addition to the already established Re.Verso™ collection for contract, the Blue Drop winning fabric by Audejas, made with Re.Verso™ re-engineered wool. A result born from the shared commitment and vision to integrate a new generation of eco values into their circular economy creations.

Since 1962, Filatura C4 has been known for smart innovation in furnishing contract markets and is now specializing in the recovery of both technical and natural fibers. The company offers a wide range of styles and typologies of yarns for the Technical, Natural and Classic categories. From the choice of raw materials up until the final packaging, Filatura C4 develops and proposes, together with its partners, tailored solutions apt to satisfy a diversified demand. Thanks to its background and its grounding, Filatura C4 is a unique partner for Re.Verso™ in the contract sector.

For the first time at FILO Milano, Filatura C4 is proud to present, in addition to the already established Re.Verso™ collection for contract, the Blue Drop winning fabric by Audejas, made with Re.Verso™ re-engineered wool. A result born from the shared commitment and vision to integrate a new generation of eco values into their circular economy creations.

Since 1962, Filatura C4 has been known for smart innovation in furnishing contract markets and is now specializing in the recovery of both technical and natural fibers. The company offers a wide range of styles and typologies of yarns for the Technical, Natural and Classic categories. From the choice of raw materials up until the final packaging, Filatura C4 develops and proposes, together with its partners, tailored solutions apt to satisfy a diversified demand. Thanks to its background and its grounding, Filatura C4 is a unique partner for Re.Verso™ in the contract sector.

The collection was planned to satisfy the market’s increasingly more specific needs, which require increased specialization and responsibility in the recovery of textile fabrics. Thanks to the Re.Verso™ system, the company offers quality products with low environmental impact through the use of pre-consumer wool packaging cuts which are collected, selected and processed in an accredited, fully transparent and traceable way. The Re.Verso™ collection is mainly employed in contract and home furnishing.

The Re.Verso™ product is available in a range of counts going from 5,000 to 9,500 Nm and it can be supplied both in singles and in twisted plies.  Re.VersoTM yarns by Filatura C4 are certified by ICEA (Environmental and Ethical Certification Institute) according to GRS (Global Recycled Standard) issued by the international body Textile Exchange and can boast unique savings (in comparison to virgin wool) in terms of energy (-27%), water consumption (-53%), and CO2 emissions (-49%), as certified by the LCA (Life Cycle Assessment) study led by Prima Q.

At Filo, Filatura C4 presents the prizewinning product signed by Audejas, leading Lithuanian producer of upholstery and home textile fabrics since 1946, made for the 75% of wool (55% Re.Verso™ wool) in mix with 20% polyamide and 5% other fibres. This product received the Blue Drop Award on the second day of MoOD 2017. MoOD Brussels is an exhibition dedicated to producers of upholstery, window and wall coverings for the residential and contract market. The Blue Drop exhibition is an inspiring overview of the “best of the best” of what you can find at MoOD selected from creations submitted by exhibitors. Unique in its own way because it is the world’s only quality label of its kind for interior textiles. The “Floris” fabric by Audejas, won the first prize of the Circular Material category, being recognized as a  product that made great effort reducing waste by focusing on eco-centric materials.

Sustainable in many different ways: recycling at Trevira © Trevira GmbH
Sinfineco-Label
05.10.2017

Sustainable in many different ways: recycling at Trevira

Bobingen - On the 4th October 2017 a new brand was introduced at Trevira: Trevira SINFINECO®. This label may be carried by all textiles that contain sustainable Trevira products. Sustainable, innovative, high-value and responsible – these are the values the new brand stands for.

As an industrial enterprise, Trevira is conscious of its special responsibility for an intact environment and has long advocated the recycling of valuable raw materials and waste products. Trevira CEO Klaus Holz: “We at Trevira wish to preserve the environment and at the same time work to create value. These are the criteria of our sustainability concept.“

Creation of the new brand is therefore only a logical step, one that enables customers to label their sustainable Trevira products as such. Trevira is known for the high quality of its products. In every way recycled products are as good as the original materials in terms of quality and performance.

Two vital elements in Pre-Consumer Recycling and an important concept in Post-Consumer Recycling form part of the sustainability strategy of Trevira to conserve resources and maintain value. :

Bobingen - On the 4th October 2017 a new brand was introduced at Trevira: Trevira SINFINECO®. This label may be carried by all textiles that contain sustainable Trevira products. Sustainable, innovative, high-value and responsible – these are the values the new brand stands for.

As an industrial enterprise, Trevira is conscious of its special responsibility for an intact environment and has long advocated the recycling of valuable raw materials and waste products. Trevira CEO Klaus Holz: “We at Trevira wish to preserve the environment and at the same time work to create value. These are the criteria of our sustainability concept.“

Creation of the new brand is therefore only a logical step, one that enables customers to label their sustainable Trevira products as such. Trevira is known for the high quality of its products. In every way recycled products are as good as the original materials in terms of quality and performance.

Two vital elements in Pre-Consumer Recycling and an important concept in Post-Consumer Recycling form part of the sustainability strategy of Trevira to conserve resources and maintain value. :

In the area of Pre-Consumer Recycling, on the one hand, residual materials resulting from the manufacture of polyester fibres and filaments in Bobingen and Guben, dependent on the manufacturing step, are processed in the agglomeration plant and restored to become serviceable primary material. The recyclates are then fed back to our fibre and filament spinning mills, to be made into new top-quality products.

On the other hand, in fibre production there occurs in the manufacture of tow a small proportion of tow that cannot be used for converting and has to be cut out. Instead of selling this material as waste, it is cut up, pressed into balls and then carded / combed by a partner, resulting in a 1A quality product. The GRS certification (Global Recycled Standard) is requested for this. As with converter tow from new material, the recycled tow is mostly incorporated into polyester wool blends (55 % PET / 45 % wool), which are used primarily in corporate wear and uniforms.

In the area of Post-Consumer Recycling, Trevira offers filament yarns consisting of 100 % recycled PET bottles. Our parent company Indorama manufactures very high quality recycled chips from PET bottles. Since only transparent PET bottles are used in Thailand, the flakes and chips are of a particularly good and very uniform quality. The recycled chips, fibres and filaments from Indorama bear the GRS certificates (Global Recycled Standard) and RCS-NL (Recycled Claim Standard). Trevira processes the regranulate made by Indorama from bottle flakes into filament yarns consisting 100 % of recycled material. The filament yarns are available in titres 167 and 76 dtex normal polyester. Alongside technical applications, they are used in the automotive and apparel sectors. In addition, many promising developments with the recycled material are on their way.

Green products to be centre stage at October’s Yarn Expo Autumn ©Messe Frankfurt
Logo Yarn Expo
08.09.2017

Green products to be centre stage at October’s Yarn Expo Autumn

  • Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products
  • Six special display zones cater to latest industry trends

Green products continue to be sought after more and more by consumers nowadays, and textiles are no exception. In order to promote sustainable development throughout the industry, a number of yarn and fibre manufacturers have endeavoured to introduce green products into the early stages of textile production, and Yarn Expo, as the leading yarn and fibre business platform in Asia, serves as an ideal stage for these suppliers to gain exposure to buyers looking for such products.

Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products

  • Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products
  • Six special display zones cater to latest industry trends

Green products continue to be sought after more and more by consumers nowadays, and textiles are no exception. In order to promote sustainable development throughout the industry, a number of yarn and fibre manufacturers have endeavoured to introduce green products into the early stages of textile production, and Yarn Expo, as the leading yarn and fibre business platform in Asia, serves as an ideal stage for these suppliers to gain exposure to buyers looking for such products.

Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products

Amongst a record number of exhibitors at this October’s Yarn Expo Autumn, the debut BCI Pavilion as well as the Sateri Pavilion and Birla Planet Pavilion that include eco-friendly products are certainly amongst the highlights this year. Better Cotton Initiative (BCI) is a global organisation with more than 1,000 members including spinners, weavers and garment manufacturers throughout the entire cotton sector. It aims to promote sustainable cotton production, benefiting workers, customers and the environment as a whole. They will form the BCI Pavilion in Yarn Expo for the first time, with five spinners showcasing their cotton yarn manufactured with eco-friendly cotton.

Sateri is a well-known brand in China which specialises in viscose rayon. This natural and high-quality fibre is made from trees grown on renewable plantations. They are the largest producer of viscose fibre in China with three mills and an annual capacity of 550,000 tons, and also have Oeko-Tex certification. This October, nine other domestic exhibitors will form the Sateri Pavilion to demonstrate their comfortable textiles and skin-friendly hygiene products made from viscose fibre.

With over 50 years of experience in manufacturing cellulosic fibres, Birla Group strives to provide greener, purer and safer products to its customers. The Group has operated in China for three years now, and values Yarn Expo’s effectiveness in helping them to promote their brand and attract a wide range of buyers. “We managed to get connected with a number of downstream buyers at the fair. We have introduced our company and products to them that there is great chance for future cooperation.” said Mr Peter Dong, Senior Manager of Aditya Birla Group.   Coming back this year, the Birla Planet Pavilion will feature three of their highlighted fibres – Birla Viscose, Birla Modal and Birla Spunshades at the fair.

Six special display zones cater to latest industry trends

The textile industry in China is undergoing a structural change with keen competition, so domestic suppliers have to develop innovative and quality products to satisfy the ever-changing markets. To match the specific needs of various buyers, Yarn Expo has established six distinct display zones gathering the leading domestic companies, namely Colourful Chemical Zone, Natural Cotton Yarn Zone, Fancy Yarn Zone, Quality Wool Zone, Green Linen Zone and e-Commerce Zone.

Not only are a number of chemical fibre products with innovative, eco-friendly and health & comfort properties on offer from exhibitors, but visitors can also gain insights into product trends in these areas from the 2017/18 China Fibre Trend Area and Innovative Textile Material Forum, both of which feature in the Colourful Chemical Zone. The Natural Cotton Yarn Zone is another highlight of the three-day show, where exhibitors will showcase their natural cotton yarn and a range of functional products. Around 50 suppliers will also showcase their latest collections in the expanded Fancy Yarn Zone.
In response to the strong demand for fibre and yarn products in China and the Asian region, the coming autumn edition of Yarn Expo will double its exhibition space, and will accommodate around 500 global yarn suppliers from 13 countries and regions. Together with Yarn Expo Autumn 2017, three other textile trade fairs are held concurrently from 11 – 13 October in the same venue: Intertextile Shanghai Apparel Fabrics – Autumn Edition, PH Value and the China International Fashion Fair (CHIC).

Yarn Expo Autumn is organised by Messe Frankfurt (HK) Ltd; The Sub-Council of Textile Industry, CCPIT; China Cotton Textile Association; China Wool Textile Association; China Chemical Fiber Association; China Bast & Leaf Fibres Textiles Association; and China Textile Information Centre.