From the Sector

Truetzschler Nonwovens will deliver equipment to enlarge an existing spunlacing line - put into operation in 2015 at the Turkish Eruslu Nonwovens Group - into a flexible, state-of-the-art production line for various light to heavy weight sustainable nonwovens.

Last year Eruslu decided to broaden its portfolio in the wipes segment by adding biodegradable products from renewable resources. The group took full advantage of the 2015 small capacity line and went for:

• a second NCR random and a NCA airlay card
• fiber preparation and card feeding equipment for the two new cards
• more hydraulic power to reliably and efficiently hydroentangle multi-layer webs
• an extension to the dryer for increased evaporation capacity

After starting up in the second half of 2022, Eruslu will be operating an ultra-modern, highly flexible NCR-NCA-NCR spunlace line, the first of its kind in Turkey. The line is tailor-made to process virgin cotton fibers, comber noils and short fibers at high speeds. End products are top-quality, lightweight natural wipes or heavy-weight, three-layer nonwovens for cosmetic pads.

Marabu is one of the first ink manufacturers to achieve climate neutrality. All Marabu Business Units will, where possible, make a specific contribution to achieve the 17 United Nations Sustainable Development Goals (SDGs) with PROJECT GREEN and therefore participate in the Green Deal.

"We are safeguarding the future of the next generations and are proud that we have managed to be a climate neutral company from July 2021 with the Tamm and Bietigheim sites. All our products, whether printing inks or creative colours, are climate neutral, too," explains York Boeder, CEO Executive Committee. "Our so-called PROJECT GREEN combines all measures that are taking us on our journey to climate neutrality. Climate protection is a particular concern for us, to which we have made a binding commitment within the scope of an extensive sustainability strategy. In accordance with our Marabu Green Deal, we avoid and reduce emissions wherever possible, e. g. by using green electricity, energy-saving schemes, mobility concepts or environmentally friendly materials. We offset all unavoidable CO2 emissions by supporting internationally certified climate protection projects. We are continually implementing measures to improve our carbon footprint and update them annually to make their success measurable. We have therefore set ourselves the active goal of reducing our CO2 emissions by another 25 % by 2030."

For decades, Marabu has invested in the research and development of safe production processes, environmentally friendly products, and clean technologies with the aim of preserving the natural environment. Marabu has worked with Climate Partner to analyse all the CO2 emissions from the sites in Tamm and Bietigheim and determine its carbon footprint. Including all product-related factors such as raw materials and logistics, Marabu currently generates approx. 18,500 tons of unavoidable CO2 emissions. This value is the positive result of a number of climate-friendly measures pursued by Marabu, such as the early switch to green electricity in 2007.

Marabu's main activities to avoid and reduce CO2 emissions:

• Energy - Switching to green electricity from hydropower
• Mobility - Migration of the company's vehicles to electric and hybrid cars as well as in e-charging stations
• Production - Use of renewable energies and resource-efficient production processes
• Raw materials - Replacing critical substances with environmentally friendly alternatives for new and existing products
• Transporting - Climate-neutral freight carriers and lower-emission transport methods like shipping or road transport replace air freight wherever possible
• Product technology - Modern, low-emission products

Outdoor apparel company Patagonia and circular fashion and textile technology group Infinited Fiber Company have signed a multiyear sales agreement for Infinited Fiber Company’s unique, premium-quality regenerated textile fiber Infinna™, which is created out of textile waste. The move marks a major milestone for both companies towards making textile circularity an everyday reality: The deal guarantees Patagonia access to the limited-supply fiber over the coming years and secures future sales income for Infinited Fiber Company as it ramps up production.

Infinna is a unique, virgin-quality regenerated textile fiber with the soft and natural look and feel of cotton. It is created from cotton-rich textile waste that is broken down at the molecular level and reborn as new fibers. Because it’s made of cellulose – a building block of all plants – Infinna is biodegradable and contains no microplastics to clog our seas. Clothes made with it can be recycled again in the same process together with other textile waste.

In April, Infinited Fiber Company announced plans to build a flagship factory in Finland to meet the growing demand for Infinna from global fashion brands. It is currently supplying customers from its R&D and pilot facilities in Espoo and Valkeakoski, Finland. The planned flagship factory will have an annual production capacity of 30,000 metric tons, which is enough fiber for roughly 100 million T-shirts made with 100% Infinna. Infinited Fiber Company expects to have sold the new factory’s entire output for several years during 2021.

More than 92 million metric tons of textile waste is produced globally every year and most of this ends up in landfills or incinerators. At the same time, textile fiber demand is increasing, with Textile Exchange estimating the global textile fiber market to grow 30% to 146 million metric tons by 2030 from 111 million metric tons in 2019. Infinited Fiber Company’s fiber regeneration technology, which uses cellulose-rich waste streams as its raw material, offers a solution both to stop waste from being wasted and to reduce the burden of the textile industry on the planet’s limited natural resources.

Mimaki held their global event Innovation Days (2-4 June 2021) to great success. The event brought together printers, journalists and experts from Mimaki Japan, USA and Europe, to nurture innovation in the sign graphics, industrial, textile and 3D markets and drive success within the industry. The global event also introduced the market to Mimaki’s recent product releases, the JFX550, JFX600 and SUJV-160.

In a week of webinars, workshops, demonstrations, and networking events, over 1,300 attendees from all across the world logged in to participate, with the demonstration of UJV100 and JV100 printers, 3D printing workshop and car wrap workshop being the most popular events. As a first of its kind for Mimaki, visitors were able to speak with regional Mimaki representatives, gaining greater insight into the global printing industry as it recovers from the COVID-19 pandemic.

A stand-out attraction of the event was the recently released 100 Series, which is priced affordably to allow printers entry into different markets, as many look to expand their portfolio in these uncertain times. The new JFX600-2513 and JFX550-2513, which debuted a few weeks prior at virtual drupa, similarly are higher end but still affordable printers, when compared to other large format UV flatbed machines in its class. 3D full colour print technology also featured heavily in the event, as Mimaki explored the exciting propositions it opens up in different markets and how the brand continues to extend the reach and accessibility of cutting-edge 3D technologies with its upcoming 3DUJ-2207 printer.

Mr. Kazuaki Ikeda, President of Mimaki Engineering commented, “I’d like to extend my thanks to everyone who joined us during this exciting new virtual event. During the pandemic, carrying on innovating has been central to Mimaki’s objectives, with eight new products having been released since October, and even more scheduled to come out over the course of this year. I hope that we can soon all meet at in-person events, once it’s safe to do so, but until then I’m excited to see the results of the continued collaboration and innovation of print industry that we saw in our Innovation Days event.”

• The Techtextil and Texprocess trade fairs have a positive view of the future and invite the sector to take part at Frankfurt Fair and Exhibition Centre from 21 to 24 June 2022.
• Exhibitors who register well in advance benefit from an early-booking discount.

The dates for the next editions of Techtextil and Texprocess have been set and the leading international trade fairs for technical textiles and nonwovens and for the processing of textile and flexible materials are set to attract exhibitors and trade visitors from all over the world to Frankfurt am Main from 21 to 24 June 2022. Thus, the fairs are shifting the biennial cycle of events from odd to even years, which fits in perfectly with the sector’s international event calendar. Companies that book exhibition space at one of the two trade fairs no later than 31 August 2021 benefit from an early booking discount. “We see the future in a positive light and are confident that we will finally be able to give the sector the opportunity to meet and exchange ideas and information in June 2022. The desire for personal encounters, direct communication and new impressions is growing from day to day”, says Olaf Schmidt, Vice President Textiles and Textile Technologies.

Elgar Straub, Managing Director, VDMA Textile Care, Fabric and Leather Technologies, emphasises that, “Texprocess and Techtextil are the world’s foremost trade fairs for our innovative sector by a large margin. Both events offer customers an unrivalled overview of state-of-the-art innovations and technological developments – and beyond. Particularly when it comes to the latest trends for sustainability and digitalisation, Texprocess and Techtextil in Frankfurt represent the most important, future-oriented market. This makes it all the more important for both the exhibitor and visitor sides of the sector that we have the opportunity to obtain an overview of the latest market developments, to exchange ideas and information and to initiate new business. We are very relieved about this and hope that, next year, we will once again have the chance to generate new momentum for our sector in the international market.”

For the first time, Techtextil and Texprocess will occupy the western sector of Frankfurt Fair and Exhibition Centre with a total of four exhibition halls and, with a hybrid format, offer the best of both the physical and immaterial worlds: personal communication, virtual networking opportunities and maximum digital coverage. With a comprehensive hygiene and safety concept, Messe Frankfurt will ensure that all visitors and exhibitors can take part safely and with a good feeling.

Teijin Limited announced today that its Tenax™ carbon fiber prepreg has been adopted for a part of nacelle, or streamlined housing, for next-generation aircraft engine to be used by Airbus. A prototype of the nacelle part, which Nikkiso Co., Ltd. is developing for Airbus’s Propulsion of Tomorrow project, will be delivered to Airbus by the end of 2021.

The Tenax™ prepreg used for the nacelle part was developed especially for aircraft applications using high-performance and rapid-curing epoxy resin. Notably, the Tenax™ prepreg can be molded at a lower temperature and in a shorter time than conventional prepregs for aircraft applications. In addition to general autoclave molding, the Tenax™ prepreg also is suited to press molding for mass production, achieving excellent quality required for aircraft applications. Furthermore, it is compatible with automated fiber placement (AFP) therefore can be combined with automatic laminating technology and short-time molding to maximize production efficiency. The excellent productivity and cost efficiency of the Tenax™ prepreg were key reasons why it was adopted for Nikkiso’s nacelle.

Teijin is intensively accelerating its development of mid- to downstream applications for aircraft, one of the strategic focuses of its medium-term management plan for 2020-2022. Going forward, Teijin intends to further strengthen its carbon fiber and intermediate material businesses to contribute to increasing global sustainability, aiming to become a company that supports the society of the future.

Mimaki, a manufacturer of inkjet printers and cutting systems, has today announced that long-standing employee, Mark Sollman, will be appointed to the role of Product Manager, EMEA on the 1st July 2021. Sollman has been with Mimaki for over 15 years and as such, his extensive knowledge of the business and its diverse product portfolio makes him the clear choice for this esteemed management position.

Sollman will be succeeding Bert Benckhuysen. After four years with Mimaki, Benckhuysen has decided to take on a new challenge as Business Development Director at Colourama. A valued Mimaki customer, Colourama is a company Benckhuysen knows well, having also previously been employed as Production Manager at this thriving Polish textile printer.

• ANDRITZ receives an additional order for a high-speed spunlace line from Zhejiang Kingsafe, China

International technology Group ANDRITZ has received an order from Zhejiang Kingsafe Hygiene Materials Technology Co., Ltd. in Hezhou, China, to supply a complete new neXline spunlace line. The line is scheduled for installation and start-up during the second quarter of 2022.

This high-capacity spunlace eXcelle line will process either 100% biodegradable fibers or blends of polyester and viscose. It is dedicated to the production of hygiene and medical fabrics. The final products will have fabric weights ranging from 30 to 100 gsm, and the annual production capacity will be up to 18,000 tons.

ANDRITZ will deliver a complete line, from web forming to drying, also integrating two high-speed TT cards, the well-known JetlaceEssentiel hydroentanglement unit and the neXdry through-air dryer equipped with a neXecodry S1 system for energy saving. This combination is becoming the market benchmark for the production of lightweight spunlace fabrics dedicated to the hygiene market.

“We are proud to operate ANDRITZ nonwoven lines, which are very reliable and efficient. It helps us a lot in producing top-of-the-range, nonwoven roll goods, thus enabling us to be recognized as a key player among nonwovens producers worldwide,” says Kingsafe’s president, Mr. Huarong Yan.

Zhejiang Kingsafe Hygiene Materials Technology Co., Ltd., founded in 1987, is one of the largest companies in China producing spunlace and spunbond nonwoven roll goods, with several spunlace lines already in operation. The final products are exported all over the world and used in many fields, such as the medical sector, health care, high-tech agriculture, and high-quality consumer and household products.

The new line is now the ninth spunlace line supplied by ANDRITZ and the third with high-speed TT cards, thus confirming the successful, long-term partnership between ANDRITZ and Zhejiang Kingsafe. The order also proves that the solution provided by ANDRITZ is recognized as the benchmark for production of premium spunlace roll goods and contains the perfect combination for wipes converting machines.

Das auf die Herstellung von Futterstoffen „Made in Italy“ spezialisierte Unternehmen Gi.Tessil Foderami erweiterte seinen Maschinenpark aus 28 Jacquard-Webmaschinen um ein erstes digitales Textildrucksystem TX300P-1800B von Mimaki, um einen Qualitätsvorsprung gegenüber den Mitbewerbern zu erzielen.

Produkt- und Servicequalität sind das Unterscheidungsmerkmal von Gi.Tessil Foderami, einem Spezialisten für Futterstoffe „Made in Italy“. Durch den Einsatz modernster Technologien und nachhaltiger Rohstoffe ist es dem Unternehmen gelungen, sich als einer der Hauptanbieter von Jacquard-Futterstoffen in Europa zu etablieren.

Die Unternehmensphilosophie, die auf die Erprobung neuer, innovativer Technologien zur Wahrung höchster Standards ausgerichtet ist, hat nun zu einem weiteren großen Schritt nach vorn geführt – der Investition in digitalen Textildruck.

Digitaldruck als Weichenstellung
Nach der Sichtung mehrerer Digitaldrucklösungen auf dem Markt fiel die Wahl auf das TX300P-1800B von Mimaki – ein Textildirektdrucksystem mit automatisiertem Druckdeckenvorschub und Eignung für Pigmenttinten, das Gi.Tessil Foderami bei Mimaki Bompan Textile erwarb

Nach den ersten Monaten mit dem Mimaki TX300P-1800B zieht Paolo Giamberini, Eigentümer und CEO, eine Erfolgsbilanz: „Im Hinblick auf das Anwendungsspektrum haben wir unsere ursprünglichen Ziele nicht nur erreicht, sondern sogar noch übertroffen. Neben dem On-Demand-Druck auf eigene Stoffe können wir auch von den Kunden gelieferte Materialien mit ganz ähnlichen Motiven versehen – und dies in völlig neuen Einsatzbereichen, wie bei den derzeit so gefragten Schutzmasken.“ So ergeben sich beachtliche Ertragschancen und Zukunftspotenziale, die Giamberini wie folgt resümiert: „Das Digitaldrucksystem Mimaki TX300P-1800B ist äußerst flexibel und vielseitig. Sein Produktionspotenzial von schätzungsweise 14.000 Metern jährlich haben wir noch nicht einmal voll ausgeschöpft, was im Wesentlichen an zwei Faktoren liegt – der Zeit, die erforderlich ist, um unsere Kunden an diese innovative Technologie heranzuführen, und dann natürlich auch der COVID-19-Krise, die das gesamte Projekt verzögert hat. So konnten wir unser Musterbuch noch gar nicht offiziell präsentieren. Aber jede Krise geht vorüber, und wenn es so weit ist, werden wir wohl schon bald eine weitere Investition dieser Art in Erwägung ziehen.“

International technology Group ANDRITZ has always been at the forefront in providing innovative and sustainable solutions for the global nonwovens industry. Optimization of resource management, especially reducing the consumption of raw materials and other substances used and also keeping resources in use for as long as possible, are decisive factors in enabling nonwovens producers to offer competitive and sustainable products.

As a world market leader for nonwovens production equipment and services, ANDRITZ offers a full range of products to meet these challenging demands.

Maximizing the evenness of the product across the entire production line is one of the key success factors. The weight profiling product range of ANDRITZ – consisting of ProDynTM and ProWidTM – has been extended by ProWinTM. This new development is the combination of the two existing systems ProDynTM and ProWidTM. It allows nonwovens producers to achieve optimum weight profiling at the crosslapper delivery and increase their process speed by up to 15% at the same time. ProWin combines the long-term process experience and in-depth knowledge ANDRITZ has on needlepunch lines with innovative software to synchronize action across the line. Guillaume Julien, Head of Needlepunch Sales at ANDRITZ Nonwoven, explains,

“We have developed a self-regulating, advanced technology to reduce fiber deposits at the edges of the web and eliminate the “smile” effect across its width. ProWin enables producers to optimize the CV ratio autonomously and precisely while also generating significant fiber savings of up to 10% and increasing production speed. Thus, it also provides a faster ROI.“

When it comes to the spunlace process, a better product quality can be obtained by ensuring that the different equipment units in the production line are consistent with one another. The TT card, the Jetlace hydroentanglement unit, and the neXdry through-air dryer are the perfect combination to obtain premium visual quality and characteristics in the web. For an equivalent amount of fibers, this set-up is designed to produce an even web with significant bulkiness and an excellent MD:CD ratio without impacting the production capacity.

Maximizing performance by minimizing the raw material input and the amount of waste produced is a real driver of cost optimization. This is why ANDRITZ has created and integrated a solution that allows nonwovens producers to retrieve the wasted edges of their spunlace fabric and re-use it as recycled fibers. As a result, roll-good producers can even obtain the same web characteristics as when using virgin fibers, and most importantly, the exact same quality.

ANDRITZ also offers – under the brand Metris – ANDRITZ digital solutions – a variety of several service apps for optimum customer benefit. The Metris Cost Management app is used to track raw material consumption. It is an advanced system aimed at monitoring fiber consumption and allowing in-depth diagnoses to investigate raw material losses and savings grouped by different process areas. Thanks to this Metris application, ANDRITZ customers are able to optimize their system’s consumption of raw materials.

All these innovations are available in ANDRITZ’s technical centers, where ANDRITZ process experts will be glad to welcome customers in order to discuss and define their product expectations.