From the Sector

Die im Bundesverband Medizintechnologie (BVMed) organisierten Hersteller von Hilfsmitteln zur aufsaugenden Inkontinenzversorgung weisen auf den zunehmenden Spagat zwischen sinkenden Erstattungspauschalen und steigenden Produktionspreisen hin. „Durch die Entwicklungen der Rohstoff-, Transport- und Energiepreise steigt der Preisdruck auf die Hersteller enorm. Auf der anderen Seite sinken die Pauschalen in den Hilfsmittel-Verträgen mit den Krankenkassen weiter. Diese Schere muss endlich wieder geschlossen werden, um die Versorgung der Patient:innen mit diesen Hilfsmitteln sicherzustellen“, so BVMed-Expertin Juliane Pohl, Leiterin des Referats Ambulante Versorgung.

Die Expert:innen des BVMed-Fachbereichs Inkontinenzversorgung betonen, dass verschiedene globale Entwicklungen zu starken Veränderungen an den Rohstoffmärkten sowie im Transportwesen führen, die sich ebenfalls auf die Produktion von Hilfsmitteln zur aufsaugenden Inkontinenzversorgung auswirken. Es sei dabei nicht davon auszugehen, dass sich diese Entwicklungen auf ein Vor-COVID-Niveau regulierten. Im Gegenteil: der Ukraine-Krieg sorge für eine Verschlechterung der Gesamtsituation im Energie-, Rohstoff- und Transportbereich.

Zum Hintergrund erläutert der BVMed, dass zur Produktion aufsaugender Inkontinenzprodukte als Rohstoffe hauptsächlich Zellstoff (Fluff), Superabsorbent Polymere (Superabsorber), Polyethylene (Folien) und Polyproylene (Vliesstoffe) verwendet werden. Bei Zellstoffen gab es nach dem Risi-Index im dritten Quartal 2021 eine Kostensteigerung von 40 Prozent gegenüber dem Vorjahreszeitraum. Bei Polyproylenen (PP Europe Index) lag die Kostensteigerung bei 60 Prozent, bei Superabsorbern bei 67 Prozent und bei Polyethylenen (LDPE EU Index) sogar bei 80 Prozent. Ursächlich hierfür sind vor allem nicht behebbare Kapazitätsprobleme. Es bestehen kaum Möglichkeiten zusätzlicher Kapazitäten für diese Rohstoffe, was zu einer unmittelbaren Verknappung und zu weiteren Preissteigerungen führt.

Die Energiepreise verzeichneten im Januar 2022 eine Steigerung von durchschnittlich 67 Prozent gegenüber dem Vorjahresniveau. Besonders prägnant ist dabei die Veränderungsrate von Erdgas: Hier ist gegenüber dem gleichen Vorjahresmonat eine Kostensteigerung von 119 Prozent zu verzeichnen. Eine maßgebliche Entspannung der Energiekosten ist laut Einschätzung von Expert:innen nicht absehbar.

Die Veränderungen im Rohstoffmarkt beeinträchtigen ebenfalls die Produktion von Primär- und Sekundärverpackungen. So sind enorme Preisanstiege zum Vorjahreszeitraum bei Sekundärrohstoffen aus Papier und Pappe (plus 73 Prozent) sowie bei Verpackungsmitteln aus Holz (plus 66 Prozent) zu verzeichnen. Wellpapier und Wellpappe erfuhren gegenüber dem Vorjahresniveau eine Preissteigerung von 42 Prozent, so die BVMed-Expert:innen.

Bedrohlich bleiben auch die Entwicklungen im Transportwesen. Weltweit besteht ein immenser Mangel an Containertransporten. Die hierdurch erhöhte Nachfrage führt zu steigenden Preisen bei den Container- und Frachtkosten. Die durch die globale Nachfrage forcierte enorme Verzögerung von Lieferungen wirkt sich ebenfalls auf das Preisgefüge aus. Auch die Überlastung zentraler Häfen in China, Nordeuropa, Singapur, Sydney und an der US-Westküste führt zu Verzögerungen und Preissteigerungen. Nach dem FBX-Index sind die weltweiten Frachtkosten im Vergleichszeitraum 2020/2021 insgesamt um 400 Prozent gestiegen. Preiserhöhungen im Transport ergeben sich außerdem aus den Entwicklungen im Bereich Energie, insbesondere Erdgas, sowie Fachpersonal.

• Expert Speakers Delivering Key Region Market Updates

Industry leaders will gain a compelling region-by-region view of the nonwovens industry from experts presenting the latest nonwovens trends in their areas of the world at IDEA®22, March 29-31 in Miami Beach.

Speakers with the latest knowledge will deliver important nonwoven market updates, demand forecasts and research findings on the industry in China, Asia, South America, North America and Europe.

The conference will explore how each region has responded to the pandemic challenges and supply chain issues with new innovations and solutions, providing IDEA®  attendees with vital insights for decision-making.

Program highlights include:

• Overview and Green Innovation Development of China’s Nonwovens Industry,  by Guimei Li, Vice President, China Nonwovens and Industrial Textiles Association (CNITA) on March 29
• South America – Land of Opportunity or Land of Turbulence? The Recent History and Trends That Are Shaping the South American Nonwovens Market, presented by Mariana Mynarski, Corporate Marketing Manager, Fitesa on March 29
• Asian Nonwovens Production and Market Update by Chan-Hyou Park, Chairman, Asia Nonwoven Fabrics Association (ANFA) on March 30
• Understanding the State of the North American Nonwovens Industry and a Market Gone Mad presented by Brad Kalil, INDA Director of Market Intelligence and Economic Insights on March 31
• An Overview of Key Issues Facing Nonwovens on Top of European Market Trends presented by Pierre Wiertz, General Manager, EDANA on March 31

IDEA® Award Presentations
Another conference highlight will be the presentation of the IDEA® 2022 Achievement Awards in partnership with Nonwovens Industry magazine, based on the results of online voting in six categories as well as the announcement of the first Sustainability Advancement Award on March 30.

IDEA® – the World’s Preeminent Event for the Nonwovens & Engineered Fabrics Industry – will feature several hundred exhibitors from a myriad of industry sectors and is expected to once again draw an audience of several thousand senior-level buyers and attendees from over 60 countries to the Miami Beach Convention Center. A welcome reception will be held to officially kick off the event on March 28.

IDEA®22 Essentials of Nonwovens Training Courses
Product developers, marketing managers, technical sales, support and other professionals can expand their industry-focused knowledge by attending the IDEA®22 Essentials of Nonwovens Training Courses.

This vital training program will provide an immersive dive into the latest nonwoven technologies, industry segments and more with courses on absorbent hygiene cores, making nonwovens, industrial wipes and consumer wipes.

A must-attend educational session on patent searching on March 31 will cover the latest major changes in patent searches on the United States Patent and Trademark Office (USPTO) website that has been updated to enhance user experience. 

On March 10th, JEC Group and Composites Expert have signed a partnership agreement to promote E-learning Composites Academy, the first 4.0 training platform dedicated to manufacturing processes of composite materials.

This partnership will start with two first steps: an introduction webinar session on March 15th at 4pm CET, and two sessions of training during JEC World 2022, on Tuesday, May 3rd and Wednesday, May 4th, in Paris where Composites Expert will present the E-learning Composites Academy, a new pedagogical approach aimed at appropriating knowledge of polymer transformation specially developed by Composites Expert.

Tools have been designed to combine the theoretical part (E-Learning course platform) and the practical part (BOXs, software, process simulator, exercises through manipulation) to observe complex phenomena, with the aim of mastering and optimising transformation processes. The aim of this presentation is to introduce people to the learning method and the interactivity of the teaching aids used in industry and education.

“One of JEC Group’s objectives is to develop access to education to help the composites industry to attract and train talented professionals. So, we are very proud to announce this partnership and to support Composites Expert initiatives, as joining common efforts and strategies will benefit to the overall industry”, stated Anne-Carole Barbarin, Content and Product development Director.

“The partnership with JEC Group is a major step towards the development of our training platform, while several manufacturers have already supported us, such as Arkema, Chomarat, Daher, Diatex, Pinette PEI, Porcher, Sopara, joining JEC World to officially launch our platform is an amazing opportunity.”, stated Jean-Pierre Cauchois, CEO Composites Expert.

These training sessions are targeting companies’ employees who would like to improve their expertise, to study professional reconversion, the companies who would like to know more or use composite materials, and universities and school for students to go from theory to practical exercises.

• INDA, the Association of the Nonwoven Fabrics Industry, today announced six new board members and its 2022 slate of officers to guide the success of the nonwovens industry and its members.

Elected by the INDA membership to three-year terms that began on March 1, the new board members bring a high level of diverse expertise and insight to the management of the association as it moves forward with its vibrant growth.

“I am delighted to welcome such a strong group of new board members who bring deep industry knowledge and insights to provide strategic stewardship for our association,” said Dave Rousse, INDA President. “We look forward to working with them to advance INDA’s new value proposition to enhance our industry’s leadership position and deliver greater value to our members.”

The new board members are from global leaders Lenzing Group, Bast Fibre Technologies, Reifenhauser Reicofil, Rockline Industries, Hollingsworth & Vose Company and Principle Business Enterprises.  

INDA also announced Bryan Haynes, Ph.D., R&E Technical Director Kimberly-Clark, has been named Chairman of the Board. Barbara Lawless, Vice President Sales and Marketing, Medical Products, Precision Fabrics Group, Inc. has been elected Vice Chair of Finance, and Richard Altice, President and CEO of NatureWorks, has been appointed to INDA’s Executive Committee.

The new board members are:

• Jürgen Eizinger, Senior Commercial Director, Nonwovens Business EU/AM/MEA, Lenzing Group

Eizinger has nearly 20 years of fiber industry experience. He has been with the Lenzing Group since 2001 and most recently was Vice President of the Global Nonwoven Business. He has worked at multiple locations around the world and held various commercial, engineering and technical customer services roles.

• Jim Posa, President and General Manager, Bast Fibre Technologies, Inc.

Posa has 30-plus years of nonwovens experience and has successfully led businesses from startups to some of the largest companies in the nonwovens market. He has developed and implemented strategic business, development, operational and acquisition growth plans. His teams have worked with businesses focused on most of the major end use markets such as hygiene, wipes, filtration, medical and industrial. As a senior executive, Posa has led global businesses at Fiberweb, BP/Amoco, CEO of a Nisseki/Amoco joint venture (ANCI), Lydall, and Nitto America. A long-time INDA supporter, he has previously served on committees and as a Board member.

• Markus Mueller – Sales Director and Board Member, Reifenhauser Reicofil

Mueller brings to the INDA Board 35 years of experience with Reifenhauser in the nonwovens and film industries. His experience has included roles as PLC Engineer, Commissioning Engineer, Project Manager and Sales Manager. Mueller has extensive knowledge of the global hygiene and medical nonwovens markets. He holds a degree in Electrical Engineering from the Technical University of Cologne.

• Matt Koele, Director of Global Materials Development, Rockline Industries

Koele is based at Rockline’s headquarters in Sheboygan, WI.  Before joining Rockline in 2012, he has held several business and Research and Development (R&D) leadership positions at SC Johnson and Kimberly-Clark Corporation. An inventor with over 10 patents, Koele is a magna cum laude graduate of Michigan Technological University in Chemical Engineering.

• Mike Clark, President, Filtration Solutions, Hollingsworth & Vose Company

Clark joined H&V in 2003 and has held numerous leadership positions in the U.S. and Germany. He previously served as the President of the High Efficiency and Specialty Filtration Division from 2009 to 2020.  Before joining H&V, Clark was a strategy consultant for eight years working with Fortune 100 manufacturing companies. He holds a bachelor’s in Mechanical Engineering from Rensselaer Polytechnic Institute.

• Andrew Stocking, Ph.D., President and CEO, Principle Business Enterprises, Inc. (PBE)

Stocking joined PBE in 2017 after a career in engineering, technology, nonprofits and government. He was named President and COO in 2018, then President and CEO in 2020, becoming the third-generation leader of the family-owned organization. He previously held roles in the private sector and within federal government offices, including the Department of Energy and Congressional Budget Office. He earned a BS in Chemical Engineering and an MS in Civil Engineering from Stanford University, and a Ph.D. in Resource Economics from the University of Maryland.

The 21-member board is comprised of elected Board Officers. One-third of the entire Board is elected each year for a three-year term by a majority vote of INDA’s general membership. INDA’s Executive Committee, empowered to act on behalf of the Board between meetings, consists of the Board Officers plus four appointees.

• A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

Launched in 2017, Startup Booster has been organized in three different regions (Europe, USA and Asia) and has already fostered the emergence of 500+ innovative projects from 50+ countries, 80 finalists and 30 winners, including Arevo, Continuous Composites, ComPair, Fortify and Vartega…
This challenge not only represents an opportunity to the winners of the trophy but to all the parts involved: participants, jury, official partners and the worldwide audience of JEC World. It brings the entire composites value chain together, creating future business opportunities.

The 20 finalists are divided into two categories:
• Process, Manufacturing & Equipment
• Materials & Products

The jury includes representatives from major manufacturers and investors:
Jelle BLOEMHOF, Head of Manufacturing Technologies of Composite, Airbus
Karl-Heinz FULLER, Head of Future Outside & Materials Mercedes-Benz AG
Florent ILLAT, Head of Safran Corporate Ventures, Safran
Brian KRULL, Global Director of Innovation, Magna Exteriors
Tim VORAGE, Founder and Manager Growth Garage Accelerator , Mitsubishi Chemicals Advanced Materials

Two pitch sessions of 10 presentations each will be held in the Agora stage (Hall 5), on Tuesday, May 3, from 10am to 11.25am (Category: Products & Materials) and from 4.30pm to 5.55pm (Category: Process, Manufacturing & Equipment). Three winners will be chosen by the jury and one winner for the sustainable aspects of the project. The awards ceremony will be held on Wednesday, May, 4th at 2.45 pm.

Category “Products & Materials”
o Blackleaf (France)
o Dongnam Realize (South Korea)
o FibreCoat (Germany)
o FVMat (Israel)
o Ora Graphene Audio (Canada)
o Pangolin Defense (France)
o Phononic Vibes (Italy)
o Revolve (Germany)
o Smart Resilin (Israel)
o Space Walker (Japan)

Category “Process, Manufacturing & Equipment”
o Antefil Composite Tech (Switzerland)
o ANYBRID (Germany)
o Atomic-6 (USA)
o Carbon-Drive (Germany)
o Continuum (Denmark)
o Fibraworks (Germany)
o Herone (Germany)
o RVmagnetics (Slovakia)
o Touch Sensity (France)
o XARION Laser Acoustics (Austria)

Morocco has created an optimal basis for companies with the introduction of the duty-free zone. RINCO ULTRASONICS will take advantage of this opportunity and strengthen its own position in the Moroccan market by establishing RINCO Morocco. RINCO Morocco will act as a center for the African continent. The automotive industry as well as the textile industry are particularly well represented locally.

RINCO ULTRASONICS AG, headquartered in Romanshorn, Switzerland, has specialized in the development and manufacture of ultrasonic welding machines and ultrasonic cutting systems since its founding in 1976. RINCO products are used for reliable welding of plastic parts as well as for cutting food and synthetic textiles.

• The 16th World Pultrusion Conference will be postponed to 5-6 May 2022

The EPTA – European Pultrusion Technology Association in cooperation with the American Composites Manufacturers Association (ACMA) will postpone the 16th World Pultrusion Conference to 5-6 May 2022 due to the corona situation and the postponement of the JEC World, with which there is a close partnership.

This conference takes place every two years and is the meeting point of the European and worldwide Pultrusion Industry. More than 25 international speakers from Belgium, Germany, France, Spain, The Netherlands, Turkey, UK and the USA will present practical presentations about innovative applications, technologies and processes. Equally current market trends and developments are on the agenda.
This World Pultrusion Conference takes now place on 5-6 May 2022 in Paris, France. The presentation language will be English. The program, further details and registration information is available at www.pultruders.com.

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

For the production of contemporary urbanwear, thought for the city, Sitip showcases the man’s suit made of jacket+trousers in warp-knit Cosmopolitan Citylife fabric: bi-stretch nylon with UV protection (UPF 50+), quick drying, easy care and skin comfort. Highly performing, breathable, comfortable, insulating and with an exceptional fit: incredible elegance and comfort that enhance the contemporary urbanwear style.

For women, Sitip presents COSMOPOLITAN Fashiontech fabrics dedicated to athleisure, with leggings made - for the summer version - in Cosmopolitan London, a bi-stretch circular knitted fabric, no seethrough, breathable, comfortable on the skin with UV protection (UPF 50+), with easy care and perfect shape retention, and - for the winter version - in Cosmopolitan Paris GZ, a circular knitted fabric raised on the reverse side, with the same properties as the previous one and thermoregulation characteristics.

The Instinct fabric is available in the recycled and raised version NATIVE INSTINCT GZ: a GRS certified thermal fabric made with pre-consumer recycled yarns, bi-stretch, breathable, resistant to pilling, easy care and high comfort, ideal for sporty knitwear and urbanwear part of the NATIVE SUSTAINABLE TEXTILES family, the Sitip fabric collection produced with GRS certified recycled yarns and low environmental impact chemicals with a lower consumption of natural resources , able to respect the environmental and social criteria extended to all the stages of the production chain, including the traceability of raw materials. Sitip also operates in line with international certifications such as OEKO-TEX®, BLUESIGN®, GRS and adheres to the ZDHC gateway, adding to these an ISO 14001 environmental management system, which certifies the company’s commitment to reducing pollution risks.

• Evopreg® range expanded with unidirectional fibre-reinforced thermoplastic tapes

Composites Evolution, a developer, manufacturer and supplier of prepregs for the production of lightweight structures from composite materials, has announced the launch of a new range of unidirectional thermoplastic tapes, to sit alongside its existing line-up of Evopreg® prepregs. The first product families being launched are Evopreg® PA polyamide tapes, and Evopreg® PP polypropylene tapes, with further product lines expected as new customer requirements emerge.

Thermoplastic tapes, also known as thermoplastic prepregs, can be used in a wide variety of markets and applications, including flexible pipes for oil & gas and water transportation, pressure vessels (for example; hydrogen storage tanks and compressed natural gas tanks), and for providing local reinforcement to pre-formed components.

Marketing Director, Ben Hargreaves, explains further: “Our state-of-the-art manufacturing line gives us the capability to produce tapes on an industrial scale, using a variety of combinations of fibre and polymer. This is complemented by a pilot-scale line that allows us to carry out development trials, or manufacture small quantities of tape if required.”

“Because they can be repeatedly re-formed (via the application of heat and pressure), Evopreg® thermoplastic tapes are also very well-suited to multi-stage processing, meaning they are an excellent choice for producing hybrid structures, inserts or over-moulded components. In addition, this ability to be repeatedly re-formed opens the door to much easier recycling than is currently possible with thermoset composites.”

Under the ClusterXchange pilot scheme, the EXTRATEX partnership organised a 5-day exchange in Czech Republic, hosted by CLUTEX (cluster for technical textile).

15 participants visited strategic and innovative companies in the field of smart materials and advances technologies, as well as research centres and the Liberec University.

During the exchange, 92 B2B meetings were organized between local companies and the exchange participants, with 75% of the contacts established leading to follow-ups after the conclusion of the exchange. This collaboration laid the foundation for potential cross-border and cross-sector business collaboration, and participants of the physical exchange improved their competences in the field of smart materials and advanced technologies.

According to a testimony from the company Bipier Srl, their participation in the exchange allowed the establishment of two important working relationships with Bcb Informatica Y Control and Vyskummy Ustav Chemickych (Research Institute for Man-Made Fibers). This cooperation wil allow Bipier Srl to equip their machines with quality temperature control, and to expand the distribution of their products.