From the Sector

A wide range of new technologies will be demonstrated by Vandewiele at the ITMA 2019 textile machinery show in Barcelona from June 20-26, including the latest RCE2+ digital carpet weaving machine.

All Vandewiele technologies are now being equipped for machine-to-machine interaction and learning, as part of the company’s comprehensive TEXconnect programme.

Meeting new industry needs
As a leader in complete carpet manufacturing systems – including BCF extrusion lines, heat setting systems and carpet weaving and tufting machines – Vandewiele has rapidly responded to the evolving needs of the textile industry for smaller and customised production runs, the most challenging of designs, and faster and more sustainable manufacturing.

The company’s sensors, software programmes and servers have become increasingly sophisticated as part of the TEXconnect program, and the real-time data from different machines – across connected manufacturing sites and across different countries and even continents – can be collected and shared. Digital models of both machines and production processes can be created and analysed for the optimisation of production settings, to vastly improve scheduling and planning and also make considerable savings in raw materials and energy consumption.

Virtual and remote control now allows for the Big Data analysis that is propelling the industry forward and will pave the way for AI applications. For carpet manufacturers, all of this is leading to the creation of truly Smart Factories.

RCE2 carpet weaving
The new RCE2+ Rug and Carpet Expert weaving machine is a truly digital workhorse, with all yarns continuously controlled and measured and the difficult bobbin changes of the past completely eliminated. This is as a result of Vandewiele’s latest Fast Creel, with the feed and tension of each pile yarn controlled by individual servomotors.

The pile yarns are now fed directly into the machine without having to pass pile-stop motions, to both increase efficiency and eliminate any waste yarns, while achieving previously unreachable industrial speeds.

The filling enters the machine smoothly via the latest IRO X3 winders, heavy duty filling brakes with multi lamellas, an active yarn recuperator and a high speed weft mixer, where again, all tensions are set electronically. Vandewiele’s servo-driven heddle frames (Smart Frames) are meanwhile already well proven in the industry.

TEXconnect further provides readily-available data on all yarn consumption, tension and threading, and then will supply the predictive maintenance that is paving the way to self-learning carpet weaving machines.

All of this would be unnecessary, if it didn’t result in allowing manufacturers to make the highest quality carpets at the most economic prices ever, with savings on the highest-bulk pile yarns from the Vandewiele extrusion lines, reduced waste yarns in the creel and industrial production speeds that have never before been attained.

On April 11^th, 2019, the 9 Partner Institutes of the AZL opened the doors of their machinery halls and research labs to provide an extensive and on-site insight into the research and development capaci-ties in the field of lightweight production and composites at the RWTH Aachen Campus. As a special highlight of this year, the AZL presented the "iComposite 4.0" self-optimizing process chain: fiber-spraying - dry fiber placement - adaptive RTM as well as AZL´s new prototype machine development "Ultra-Fast Consolidator Machine" for highly productive and flexible processing of thermoplastic tapes with in-situ consolidation (winner of the JEC World Innovation Award 2019).

More than 100 Participants from external companies as well as from the AZL Network had the possibility to experience updates on the latest lightweight production technologies and equipment, get to know the bene-fital infrastructure on the Campus and network with internationally represented companies of the entire light-weight value chain researches by taking part in five guided tours to the lightweight institutes.

The AZL brought together content in the field of textiles (ITA), plastics and composite materials (IKV), pro-duction technology (WZL, IPT, ILT, and ISF), quality assurance and production-integrated measurement technology (WZL), lightweight design (SLA), automotive production (IKA) as well as multi-material systems and process integration (AZL).

Once a year at the Open Day, the AZL offers an exclusive and widespread unique insight into the R&D capacities of the institutes in the field of lightweight and composite technologies on the campus of RWTH Aachen University. Within walking distance, researchers and students from 9 institutes are working on the latest technologies for the cost-efficient development and production of lightweight components within one of the largest research landscapes in Europe. The research, closely involving industrial companies, covers the entire value chain from fiber production, materials and processing technology to quality assurance and com-ponent testing.

Techtextil 2019: Schoeller launches its new finishing technology called NanoSphere® Plus. The special effect of this new development is its protection against fingerprints and greasy stains. Furthermore, even after being absorbed by the fabric stains are quickly and easily wiped away without washing.

Every human being leaves its marks. In particular, on daily-use items that are picked up or touched often. Especially on textile surfaces, hand and fingerprints in combination with dirt and dust particles leave an unpleasant, greasy dirt film, which is very difficult to clean.

NanoSphere® Plus, developed by Schoeller Technologies AG, the business unit for technologies at Schoeller Textil AG, works on the basis of a functional chain. Textiles are equipped with a matrix finish to reduce the capillary effect in the textile’s fibers. Especially unpleasant sebum residues and dirt that are often released by finger and handprints are less absorbed by the fabric and can be easily wiped away.

Beside the excellent protection against finger and handprints, textiles with NanoSphere® Plus are additionally water and oil repellent, abrasion resistant and extremely durable. The finishing technology rarely affects the look or feel of the fabric.

Non-washable textiles that are often touched by hands or fingers, or fabrics that are in direct contact with the skin benefit most from this new technology. Therefore, NanoSphere® Plus is ideal for woven fabrics and synthetic leather or synthetic suede for bags, covers of electronical devices, head phones, loud speakers or other items in the field of interior equipment.

On the international stage of JEC World, composite innovation is everywhere! On the planets, on the live demo zones, on the stands, and also on stage... During this second day of the world's largest composites exhibition, the winners of the JEC Innovation Awards were announced.

JEC Innovation Awards celebrate the fruitful cooperation between players of the composite community. Over the past 15 years, the JEC Innovation Awards have brought in 1,800 companies worldwide. 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality or commercial applications of innovations.

The ceremony was opened by Bertrand Piccard, the founder and visionary behind Solar Impulse, the first zero-fuel aircraft with perpetual autonomy.

The jury then announced the ten composite innovation champions selected among 30 finalists, from more than a hundred entries, and the public awarded its prize.
"JEC Group supports innovation and has created the Composites Reference Prize to reward industry champions and promote their innovations. Every year, we receive more than a hundred applications from all over the world," explains Franck Glowacz, Composites Expert at JEC Group.

Download the PDF to see all winning companies.

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

• 8^th edition to be held as the “Fair & Convention for Hightech Textiles” at the Carlowitz Congresscenter Chemnitz for the first time on 9 – 10 June 2020 – Textile themes from the LiMA exhibition for lightweight design are being integrated in the new format

 
The “mtex+” is raising its profile and is moving to an attractive setting. The 8^th edition of the international exhibition entitled “Fair & Convention for Hightech Textiles” will be held in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 and 10 June 2020.
 
“The “mtex+” is a trade event that experts from various sectors greatly appreciate on account of its emphasis on dialogue and in-depth contacts – and because everything is on the spot. The modern, exciting ambiance at the new venue facilitates our desire to create the best possible atmosphere for cooperation in a trusting environment,” Dr Ralf Schulze, Managing Director of C3 GmbH, the organising company, explains. “In its future form, the “mtex+” will act as a source of ideas and inspiration for developers and manufacturers as well as for users of all kinds of high-tech textiles, specifically including composites, to a greater degree than in the past. Textile composite materials are becoming increasingly important for many processors. That’s the reason why we’re transferring the textile themes of the LiMA lightweight design exhibition, which has been held alongside the “mtex+” in the past, into our new trade fair format. Lightweight textile design in all its facets will be one of the major emphases at the “mtex+”.”    
 
The major topics covered by the 8th “mtex+” will include process development, textile engineering, digitalised value-added chains, services with potential for use across different sectors as well as recycling. The highlights of the programme will include workshops on effective and sustainable production, smart textiles, acoustic textiles, a special exhibition on health and protective textiles as well as an entertaining network evening entitled “Excellent connections”.

The North-Eastern German Textile and Clothing Industry Association (vti) believes that this concept exactly matches the needs of its target audience. “Chemnitz is located at the heart of the Central German industrial and research region, which is developing with great dynamism,” says vti Managing Director, Dr.-Ing. Jenz Otto. “Any firm that presents its products and services here will find itself in a very interesting market. Located not far from the border with the Czech Republic and Poland, the “mtex+” will also act as a dialogue forum for potential cooperation partners across sector and international boundaries, both for these and other Eastern European countries.”
 
The “mtex+” will continue to be held in Central Germany’s industrial city of Chemnitz every two years in future too. 159 exhibitors from seven different countries (in conjunction with the LiMA lightweight design exhibition) attended the 7th edition in the spring of 2018. 22 percent of the approx. 1,000 trade visitors came from abroad.

• Company to showcase innovation while marking its 100th anniversary

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, will showcase its extensive nonwovens converting experience at IDEA19, held March 25 to 28, 2019, in Miami. Attendees may visit booth #1660 to learn how PCMC’s modular equipment serves a variety of market needs, as well as join the festivities when the company commemorates its 100th anniversary with a cake celebration from 2 to 5 p.m. on Wednesday, March 27.

Offering hygienic, high-speed folding solutions, crossfolding machines that provide quick product changeovers and multi-servo cutting modules, PCMC can meet a wide range of production demands and enhance customers’ profitability, whether they’re creating cosmetic, medical, baby, dispersible, scientific, cleaning, polishing, sanitizing or drying wipes.

For interfolded and non-interfolded flat-pack wet wipes, PCMC’s modular, low-maintenance Clipper series can achieve 800 cuts per minute in hygienic and non-hygienic designs. With the compact footprint of the Marlin Pro, crossfold wipe customers can save space, while also reducing waste and achieving the lowest cost per wipe.

• The world’s leading exhibition for additive manufacturing takes place in Frankfurt am Main every year
• With 26,919 visitors, Mesago, organiser of Formnext in Frankfurt, reported a new record with numbers up by 25% on the previous year.

This year Perlon was amongst the 632 exhibitors from 32 countries for the first time, which, represented by Pedex GmbH from Wald-Michelbach, was a co-exhibitor on a stand for companies from the German region Hesse (Hessen Trade and Invest GmbH - HTAI). Some visitors were surprised to discover that the world leading manufacturer of synthetic filaments is also active in the 3D printing filament field. That the Perlon Group, known innovation and market leader in many fields of application, with its decades of experience in the development and manufacture of filaments, has entered into the 3D printing market was well received.

The fact we actually entered the market 6 years ago, was only known to a few experts in the field. In this time, Pedex GmbH had been producing a wide range of performance filaments for a well-known German 3D printer manufacturer, who since then has distributed exclusively under its own brand. The decision, to out ourselves as producer and supplier was taken in summer 2018. This new direction has two main aims, firstly to establish ourselves in the market as a manufacturer of Perlon® 3D printing filaments, producing both small batches and high volume on an industrial scale for professional applications, but secondly and most specifically to continue along the path as a toll manufacturing partner with long-term contracts on an industrial scale.

As a partner with universities/institutions and member of various research networks, we are close to the quickly advancing developments in this field, which is why we were really pleased to welcome Dr. Andreas Baar and Dr (Ing) Thomas Neumeyer onto our stand. They are both members of RESOPT3D (Netzwerk für ressourcenoptimierten 3D-Druck), Germany’s strongest user network for 3D technologies.

Together with Conspir3D in Rheinheim and its owner Jan Giebels, who 10 years ago was a co-founder of the company German RepRap, we were able to forge a partnership to distribute Perlon® 3D printing filaments. With his support we could competently advise trade visitors about filaments and 3D printing as a collective proactive team.

Next year, Formnext will take place from 19th to 22nd November 2019 for the first time in exhibition halls 11 and 12 at the Exhibition Centre in Frankfurt am Main. This will be a debut exhibition for the USA which will be exhibiting as first partner country at Formnext. The USA has a long tradition in the field of additive manufacturing and is one of the most important international exhibiting nations.

"Datacenter in a box" is the new powerful, flexible and secure IT infrastructure solution for the textile industry of the future

Remscheid/Berlin – Oerlikon Manmade Fibers Segment Industrie 4.0 solutions for the production of polyester, nylon and polypropylene are based on the digitalization of the production landscape and the intelligent processing of the flood of data generated in this way. In the future, the segment will offer its customers a new powerful, flexible and, above all, secure IT infrastructure. The "Datacenter in a box" was presented for the first time at the OpenStack Summit in Berlin, Germany, to a broad specialist audience. The compact datacenter works on the basis of the open operating system OpenStack, which enables virtual computing in a secure private cloud environment.

Externally, the datacenter looks unspectacular: The box contains standard hardware such as server rack, network components, batteries for reliability, monitoring sensors and a few more things. But what counts are the inner values. The Open Source software OpenStack consists of many different services and allows the virtualization of a large pool of computing, storage and network resources in a flexible, scalable private cloud. This brings two central advantages: On the one hand, virtual operation reduces costs and simplifies configuration, adaptation and expansion of the IT infrastructure today and tomorrow. On the other hand, long-cherished wishes for high data protection are fulfilled, because a private cloud maintains secure, highly encrypted data connections away from the World Wide Web.

"The functional diversity of a cloud, operation and hardware in one's own four walls at the same time – our customers immediately understood these advantages" reports Mario Arcidiacono, specialist for Business Intelligence & Data Warehouse at the Oerlikon Manmade Fibers Segment. The IT architecture also guarantees infrastructure management without downtime, the system and virus protection are automatically kept up to date at all times. Another major advantage is the scalability of the hardware and software, which can be adapted to changing requirements.

OpenStack Summit: Project example with yarn manufacturer from Vietnam presented

With these trump cards and a project example, the Group segment confidently presented itself to a genuine specialist audience in mid-November. At this year's OpenStack Summit in Berlin, where thousands of cloud professionals met, Oerlikon Manmade Fibers Segment CEO Georg Stausberg presented the customer installation at Century Synthetic Fibre Corporation, which supplies many well-known sporting goods manufacturers. The Vietnamese producer of high-quality yarns not only uses the new datacenter, but also the connection to the new "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment as well as an innovative new dashboard solution in prototype status. In this case, the digital instrument panel supports employee communication during shift changes in the yarn factory and introduces agile methods into the work process. The board visualizes the progress of central key figures and operating parameters from the current production process. Based on this, the employees of the successive shifts can now exchange important process and quality information and possible instructions for action within a few minutes in a structured stand-up meeting. "For the customer this means an immediate improvement of the processes, and he can significantly increase the efficiency and quality of his employees' work," assures Joerg Gross, Senior Manager in the IT-architecture team at the Oerlikon Manmade Fibers Segment.

New IT-basis for the Plant Operation Center (POC) already successful established on the market

The fixed connection to the "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment plays a pioneering role in such solutions. This enables services and software updates to be provided smoothly, quickly and automatically. In this way, service applications can transform collected data into instructions or automated commands to secure and improve processes. For example, the secure availability of management solutions such as the Plant Operation Center (POC) for process monitoring can be increased and possible errors can be rectified very quickly. The new digital solution AIM4DTY (AIM = Artificial Intelligence Manufacturing), which was unveiled at the ITMA ASIA + CITME 2018 in Shanghai, China, a few weeks ago, can also be implemented in this way. AIM4DTY uses methods of machine learning, determines probable causes of errors in texturing and helps to improve quality during production.

Launch at ITMA Barcelona 2019

The Oerlikon Manmade Fibers Segment offers such remote-supported services on request. Data will therefore only be transferred to the “Common Service Platform (CSP)” with the customer's consent. In addition, all data is processed in accordance with the new European General Data Protection Regulation (GDPR) and all other international data protection standards. Against this backdrop, the Oerlikon Manmade Fibers Segment plans to provide its datacenter with graded or customer-specific solutions: from complete service to provision with customer training for its own operations. After initial practical experience with several pilot customers, the segment intends to launch its offering on the market next year and officially present it to the textile industry at ITMA 2019 in Barcelona, Spain.

New products for photopolymer and laser sinter printing methods from BASF 3D Printing Solutions GmbH (B3DPS) are on show from November 13 to 16 at Stand F20 in Hall 3.1 at this year’s formnext fair in Frankfurt. The BASF subsidiary is also announcing several new partnerships for the development and distribution of groundbreaking 3D printing solutions and products.

B3DPS has entered into a strategic partnership with the US company Origin, San Francisco, California for the further development of photopolymer printing processes. “Within the framework of an open business model, we are combining BASF’s material know-how with Origin’s expertise in printer software programming and the manufacture of the corresponding hardware,” explained Volker Hammes, Managing Director BASF 3D Printing Solutions GmbH. The collaboration has already shown the first signs of success. Origin has developed a new printing method where BASF’s new Ultracur3D photopolymers can be processed particularly well. The technology offers an optimal combination of a good surface finish and high mechanical stability, while also allowing for high material throughput.

B3DPS is working together with Photocentric, a manufacturer of 3D printers and their corresponding software and materials, on the development of new photopolymers and large-format photopolymer printers for mass production of functional components. Based in Peterborough, UK and Phoenix, USA, Photocentric has developed and optimized the use of LCD screens as image generators for its own printing systems. The two partners plan to offer the industry 3D printing solutions that replace parts of traditional manufacturing processes such as injection molding for small series, as well as enabling the production of large components.

The objective of the cooperation with Xunshi Technology, a Chinese printer manufacturer headquartered in Shaoxing, and operates in USA under the name Sprintray, will be opening new fields of application in 3D printing for the Ultracur3D product range of B3DPS.

Ultracur3D specialties for photopolymer printing processes
B3DPS has grouped well-established and new photopolymers designed for the respective 3D printing processes under the brand name Ultracur3D. BASF has developed unique raw materials for its new products that enable special part properties.
“Our Ultracur3D portfolio enables us to offer customers various UV-curable materials for 3D printing that provide far better mechanical properties and higher long-term stability than most available materials,” explained András Marton, Senior Business Development Manager at B3DPS. He added: “These materials have been developed for functional components that are subject to high stress.”

Expansion of distribution network for filaments
Innofil3D, a subsidiary of B3DPS, is entering into a partnership with Jet-Mate Technology, based in Tjanjin, China, for the distribution of plastic filaments in China. In parallel, a distribution agreement has been concluded with M. Holland in Northbrook, USA for the distribution of filaments in USA. “Since the USA is the largest market for filaments, we intend to strengthen our activities there,” said Jeroen Wiggers, Business Director 3DP Solutions for Additive Extrusion at B3DPS, adding: “Asia is another important market for us. We will be developing further distribution channels there and putting our Ultrafuse filaments on the Asian market in 2019.”

BASF’s portfolio of filaments for 3D printing are comprised of two categories; the well-established Innofil3D filaments based on generic polymers for conventional applications and polymer-based Ultrafuse filaments for advanced formulations used in demanding technical applications. One of the broadest filament selections on the market, this portfolio covers customer requirements ranging from prototype to industrial-scale production.

SLS: new 3D printing material with fire protection classification
New flame-resistant Ultrasint Polyamide PA6 Black FR meets UL94 V2 fire protection standards and is a new material class for use in selective laser sintering (SLS) processes, distinguished by high stiffness and thermal stability. In cooperation with one of the global leaders of public transportation vehicles, B3DPS has developed new components that meet vehicle fire protection requirements. “Together with our partner, we are currently producing prototypes, spare parts, and small series components, and are working to further improve flame resistance to meet additional certification specifications,” explained Hammes.
BASF introduced Ultrasint Grey PA6 LM X085 at AMUG this spring and now is followed by another product on show at formnext. Ultrasint PA6 Black LM X085 is based on polyamide 6, and can be processed at 175-185 degrees Celsius therefore making it suitable for most current SLS machines.

B3DPS adds polypropylene to its 3D printing portfolio
Through the acquisition of Advanc3D Materials GmbH in July 2018, B3DPS has expanded its range with numerous materials for use on laser sinter machines, including polyamide Adsint PA12, Adsint PA11, Adsint PA11CF and Adsint TPU flex 90.
Ultrasint PP is a special highlight. This polypropylene-based product exhibits outstanding mechanical properties and is frequently used in standard industrial production as it offers a good balance between price and performance. Ultrasint PP is distinguished by excellent plasticity, low moisture uptake, and resistance to liquids and gases. Prototypes and small batches can now be produced from the same material as used for traditional serial production. Post treatments such as thermoforming, sealing, and dyeing can be performed after printing.