From the Sector

Reset
48 results
LENZING™ fibers are fully biodegradable in water, soil and compost (c) Lenzing
30.08.2019

LENZING™ fibers are fully biodegradable in water, soil and compost

  • Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
  • All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
  • Global legislators aim at limiting plastic waste persisting in the environment for centuries
  • EU Single-Use Plastics Directive partly regulates usage of plastic products
  • Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

  • Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
  • All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
  • Global legislators aim at limiting plastic waste persisting in the environment for centuries
  • EU Single-Use Plastics Directive partly regulates usage of plastic products
  • Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

The biodegradability of cellulosic products and the synthetic fiber polyester was tested in fresh water at OWS according to valid international standards, e.g. ISO 14851. At the end of the trial period, LENZING™ wood-based cellulosic fibers, cotton and paper pulp were shown to be fully biodegradable in fresh water in contrast to synthetic polyester fibers. The fact that synthetic materials are not biodegradable leads to major problems in wastewater treatment plants and potentially marine litter. In turn, this not only harms fish and birds living in and close to the oceans but also all marine organisms and us humans.

“The Lenzing Group operates a truly circular business model based on the renewable raw material wood to produce biodegradable fibers returning to nature after use. This complete cycle comprises the starting point of the core value of sustainability embedded in our company strategy sCore TEN and is the ‘raison d’etre’ of our company”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “In living up to this positioning, we not only enhance the business of our suppliers, customers and partners along the value chain but also improve the state of the entire textile and nonwovens industries.”

Both the textile and nonwovens industries face huge challenges with respect to littering. If current trends continue, the oceans could contain more plastic than fish by 2050. Therefore, legislative bodies worldwide can no longer ignore the issue and have moved towards plastics legislation aimed at limiting the vast amount of waste. In response, European lawmakers issued the Single-Use Plastics Directive currently being transposed into national legislation in the EU member states.

Conventional wet wipes and hygiene products mostly contain plastic and were thus identified as one of the product categories to be singled out. Less polluting alternatives are generally encouraged by NGOs and legislators, e.g. products made of biodegradable wood-based cellulosic fibers. Plastic waste including microplastic can persist in the environment for centuries. In contrast, biodegradable materials are the best alternative to single-use plastics because they fully convert back to nature by definition and thus do not require recycling.

Source:

Corporate Communications & Investor Relations
Lenzing Aktiengesellschaft

(c) HeiQ
04.06.2019

HeiQ announces new subsidiaries: HeiQ China and HeiQ Taiwan

  • Operations, Product Development, Sales and Technical Support Growth

Celine Huang 黄秀蔚 is named Chief Executive Officer for HeiQ Greater China and Ming Wen Liang 梁銘文is named Chief Executive Officer HeiQ Taiwan. Huang, with her background as a general manager of a large player in the same industry brings a total of over 20 years of solid testing lab, agent and country strategies management expertise with an excellent relationship skills with customers, distributors, dealers and end users. She has a chemical engineering degree in dyeing and finishing from China Textile University. Huang has worked in both Australia and China in senior management positions. Huang will lead the group’s Greater China business from the newly created Shanghai office (瑞士海屹科新材料有限公司上海办事处).

  • Operations, Product Development, Sales and Technical Support Growth

Celine Huang 黄秀蔚 is named Chief Executive Officer for HeiQ Greater China and Ming Wen Liang 梁銘文is named Chief Executive Officer HeiQ Taiwan. Huang, with her background as a general manager of a large player in the same industry brings a total of over 20 years of solid testing lab, agent and country strategies management expertise with an excellent relationship skills with customers, distributors, dealers and end users. She has a chemical engineering degree in dyeing and finishing from China Textile University. Huang has worked in both Australia and China in senior management positions. Huang will lead the group’s Greater China business from the newly created Shanghai office (瑞士海屹科新材料有限公司上海办事处).

Liang will manage mill relations, technical support and distribution at HeiQ Taiwan. She brings close to 20 years of experience in textile and garment production supply chain focusing on sales, material innovation and development, sourcing and production. Liang holds a Bachelor of International Trade from the National Taipei University of Business, Taiwan, speaks Chinese, English and Spanish and has lived in both Taiwan and Argentina. And will be based in the new office in Taipei (瑞士海屹科有限公司).

HeiQ continues to increase its global footprint with the creation of HeiQ Shanghai and HeiQ Taiwan. In addition to HeiQ Hong Kong, these offices aim to provide dedicated technical support in the Greater China area, further broaden its geographical reach in strategic locations and support HeiQ’s brand partners’ manufacturing activities in the region.

(c) Schoeller Textil AG
29.03.2019

Schoeller: NanoSphere® Plus protects against fingerprints and dirt

Techtextil 2019: Schoeller launches its new finishing technology called NanoSphere® Plus. The special effect of this new development is its protection against fingerprints and greasy stains. Furthermore, even after being absorbed by the fabric stains are quickly and easily wiped away without washing.

Every human being leaves its marks. In particular, on daily-use items that are picked up or touched often. Especially on textile surfaces, hand and fingerprints in combination with dirt and dust particles leave an unpleasant, greasy dirt film, which is very difficult to clean.

NanoSphere® Plus, developed by Schoeller Technologies AG, the business unit for technologies at Schoeller Textil AG, works on the basis of a functional chain. Textiles are equipped with a matrix finish to reduce the capillary effect in the textile’s fibers. Especially unpleasant sebum residues and dirt that are often released by finger and handprints are less absorbed by the fabric and can be easily wiped away.

Techtextil 2019: Schoeller launches its new finishing technology called NanoSphere® Plus. The special effect of this new development is its protection against fingerprints and greasy stains. Furthermore, even after being absorbed by the fabric stains are quickly and easily wiped away without washing.

Every human being leaves its marks. In particular, on daily-use items that are picked up or touched often. Especially on textile surfaces, hand and fingerprints in combination with dirt and dust particles leave an unpleasant, greasy dirt film, which is very difficult to clean.

NanoSphere® Plus, developed by Schoeller Technologies AG, the business unit for technologies at Schoeller Textil AG, works on the basis of a functional chain. Textiles are equipped with a matrix finish to reduce the capillary effect in the textile’s fibers. Especially unpleasant sebum residues and dirt that are often released by finger and handprints are less absorbed by the fabric and can be easily wiped away.

Beside the excellent protection against finger and handprints, textiles with NanoSphere® Plus are additionally water and oil repellent, abrasion resistant and extremely durable. The finishing technology rarely affects the look or feel of the fabric.

Non-washable textiles that are often touched by hands or fingers, or fabrics that are in direct contact with the skin benefit most from this new technology. Therefore, NanoSphere® Plus is ideal for woven fabrics and synthetic leather or synthetic suede for bags, covers of electronical devices, head phones, loud speakers or other items in the field of interior equipment.

More information:
Schoeller Textil AG
Source:

Schoeller Technologies AG

Oerlikon presents its expanded nonwovens product portfolio at the IDEA 2019 in Miami (c) Oerlikon
28.02.2019

Oerlikon - Partnerships are the focus of IDEA 2019

  • Oerlikon presents its expanded nonwovens product portfolio at the IDEA 2019 in Miami

Neumünster – Oerlikon presents its complete nonwoven plant portfolio for the production of airlaid, meltblown, spunbonded and hybrid materials at this year’s IDEA in Miami from 25–28 March. The focus of its presentation will be on solutions for hygiene, medical and other disposable nonwovens. Visitors to this year’s IDEA can inform themselves on the wide range of products at Oerlikon’s exhibition stand (no. 1724).

Two strong partnerships for disposable nonwovens

While two years ago the Nonwoven business unit of the Oerlikon Manmade Fibers segment focused almost exclusively on solutions for technical applications, the company has now expanded its product portfolio to include solutions for disposable nonwovens by establishing strong partnerships.

Oerlikon & Teknoweb Materials – two strong partners for the nonwoven industry

  • Oerlikon presents its expanded nonwovens product portfolio at the IDEA 2019 in Miami

Neumünster – Oerlikon presents its complete nonwoven plant portfolio for the production of airlaid, meltblown, spunbonded and hybrid materials at this year’s IDEA in Miami from 25–28 March. The focus of its presentation will be on solutions for hygiene, medical and other disposable nonwovens. Visitors to this year’s IDEA can inform themselves on the wide range of products at Oerlikon’s exhibition stand (no. 1724).

Two strong partnerships for disposable nonwovens

While two years ago the Nonwoven business unit of the Oerlikon Manmade Fibers segment focused almost exclusively on solutions for technical applications, the company has now expanded its product portfolio to include solutions for disposable nonwovens by establishing strong partnerships.

Oerlikon & Teknoweb Materials – two strong partners for the nonwoven industry

As early as spring 2017, Oerlikon Manmade Fibers' Nonwoven business unit had entered into a strategic partnership with the Italian company Teknoweb Materials. Teknoweb Materials is an established technology supplier in the field of wipes and other disposable nonwovens. With its LEVRA technology, the company has its own patented, particularly efficient manufacturing process for wipes. It also has extensive process know-how on the making and further processing of these nonwoven materials. The Nonwoven business unit of Oerlikon’s Manmade Fibers segment completes this partnership with its well-established machine and plant solutions. Teknoweb Materials will also be represented at IDEA at the Oerlikon exhibition stand (no. 1724).

Cooperation with Shaoyang Textile Machinery

For spunmelt systems solutions for hygiene and medical applications, Oerlikon has been in cooperation with the Chinese machine and plant manufacturer Shaoyang Textile Machinery since Autumn of last year. The goal of these cooperation partners is to advance the international marketing of spunmelt plants outside of China. Oerlikon Manmade Fibers’ Nonwoven business unit contributes its plant engineering know-how and is responsible for product and process guarantees. Oerlikon also assumes the overall project responsibility as well as world-wide customer service outside of China. In return, Shaoyang, with its headquarters in the city of the same name in the Hunan province, supplies the plant technologies.The advantage for the customer: competitive solutions at an attractive price level with comparatively low investments.

Source:

Oerlikon - Marketing, Corporate Communications & Public Affairs

 

06.02.2019

Nonwovens converting leader PCMC to exhibit at IDEA19 trade show

  • Company to showcase innovation while marking its 100th anniversary

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, will showcase its extensive nonwovens converting experience at IDEA19, held March 25 to 28, 2019, in Miami. Attendees may visit booth #1660 to learn how PCMC’s modular equipment serves a variety of market needs, as well as join the festivities when the company commemorates its 100th anniversary with a cake celebration from 2 to 5 p.m. on Wednesday, March 27.

Offering hygienic, high-speed folding solutions, crossfolding machines that provide quick product changeovers and multi-servo cutting modules, PCMC can meet a wide range of production demands and enhance customers’ profitability, whether they’re creating cosmetic, medical, baby, dispersible, scientific, cleaning, polishing, sanitizing or drying wipes.

  • Company to showcase innovation while marking its 100th anniversary

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, will showcase its extensive nonwovens converting experience at IDEA19, held March 25 to 28, 2019, in Miami. Attendees may visit booth #1660 to learn how PCMC’s modular equipment serves a variety of market needs, as well as join the festivities when the company commemorates its 100th anniversary with a cake celebration from 2 to 5 p.m. on Wednesday, March 27.

Offering hygienic, high-speed folding solutions, crossfolding machines that provide quick product changeovers and multi-servo cutting modules, PCMC can meet a wide range of production demands and enhance customers’ profitability, whether they’re creating cosmetic, medical, baby, dispersible, scientific, cleaning, polishing, sanitizing or drying wipes.

For interfolded and non-interfolded flat-pack wet wipes, PCMC’s modular, low-maintenance Clipper series can achieve 800 cuts per minute in hygienic and non-hygienic designs. With the compact footprint of the Marlin Pro, crossfold wipe customers can save space, while also reducing waste and achieving the lowest cost per wipe.

Source:

Barry-Wehmiller

28.08.2018

480 international exhibitors ready for Cinte Techtextil 2018

Cinte Techtextil China opens its doors next week, with around 480 exhibitors from 22 countries and regions preparing for another successful showcase of the world’s leading textile innovations. Leading international and domestic brands will feature in halls N1 – N3 at Shanghai New International Expo Centre from 4 – 6 September, making Cinte Techtextil the ideal place to make connections and gain insight into Chinese and Asian market trends.

The technical textile industry in the Asia region, and China in particular, has been growing steadily and is predicted to continue doing so. China’s total output of technical textiles and nonwoven products is estimated to account for 30% of global production by 2020, and double that of 2013. This high potential for growth, achieved through investments worth billions of dollars, has drawn attention from European exhibitors, who are set to travel to the region for Cinte Techtextil.

Cinte Techtextil China opens its doors next week, with around 480 exhibitors from 22 countries and regions preparing for another successful showcase of the world’s leading textile innovations. Leading international and domestic brands will feature in halls N1 – N3 at Shanghai New International Expo Centre from 4 – 6 September, making Cinte Techtextil the ideal place to make connections and gain insight into Chinese and Asian market trends.

The technical textile industry in the Asia region, and China in particular, has been growing steadily and is predicted to continue doing so. China’s total output of technical textiles and nonwoven products is estimated to account for 30% of global production by 2020, and double that of 2013. This high potential for growth, achieved through investments worth billions of dollars, has drawn attention from European exhibitors, who are set to travel to the region for Cinte Techtextil.

This year’s European Zone will feature around 30 exhibitors from countries including Austria, France, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, Germany and Italy. In addition to this, the Czech Republic will present its debut pavilion, showcasing exhibitors with solutions for technical yarn, fabric processing and nonwoven fabrics.

In addition to this, exhibitors from 12 more countries and regions will present their latest innovations to the market. These include domestic and international exhibitors from China, Hong Kong, India, Indonesia, Israel, Japan, Korea, Saudi Arabia, Taiwan, Thailand, Turkey and the US.

Belt and Road: a success story for Buildtech
Following higher regulations and quality standards that aim to exceed Western levels, demand is high in China for production machinery. What’s more, with the national nonwovens market displaying particularly fast growth, Cinte Techtextil has attracted some of the world’s leading nonwoven and weaving machinery brands.

The fair will showcase leading global exhibitors across 12 application areas. Two areas to watch out for include Buildtech and Mobiltech, which are both performing well in Asia and specifically in China. The Belt and Road initiative brings Buildtech a great deal of benefits through China’s enormous investments in global infrastructure. Adding to this, China’s automobile production has been increasing 3% year-on-year, with particularly high growth seen in new-energy vehicles, SUVs and commercial vehicles. China has become the world’s largest auto producer, and this has been boosting progress in the Mobiltech category.

Cinte Techtextil fringe programme a hub of industry insight
A comprehensive fringe programme will keep Cinte Techtextil fairgoers up to date with industry news, with standout events including the 7th China International Nonwovens Conference. Focusing on the global nonwovens industry, topic highlights include the latest innovations in China’s nonwovens industry, an insight into the North American nonwovens market, future trends in the global hygiene product market, and more. The conference will also discuss innovations and developments in filter materials and the wipe industry.

The first day of the fringe programme will see a panel discussion in hall N1, moderated by the Taiwan Technical Textiles Association (TTTA), with confirmed panellists including DuPont, IBENA Textilwerke and SGS-CSTC Standards Technical Services. The panel will focus on current trends, developments and standards in the protective textile industry.

Other fringe programme events will include seminars and product presentations led by industry leaders on the latest global technologies and market trends, and an Innovation Showcase Area in a variety of application categories. 

More information:
Cinte Techtextil China
Source:

Messe Frankfurt (HK) Ltd

(c) Messe Frankfurt (HK)
05.03.2018

European suppliers at Intertextile Shanghai the go-to option for Chinese buyers seeking quality and style

  • New collaboration of sustainable viscose suppliers formed in China

Digital Printing Zone debuts at Spring Edition
Despite the economic ups and downs in China over the last few years, demand for premium European textiles remains high.
Whether it be premium wool for the flourishing suiting market, ladieswear fabrics, lace & embroidery for high-end domestic brands each with hundreds of stores across the country, innovative yarns & fabrics for the booming sports and activewear sectors, or original pattern designs for the thousands of new online fashion brands, European suppliers remain the go-to option for Chinese buyers looking for quality and style.

  • New collaboration of sustainable viscose suppliers formed in China

Digital Printing Zone debuts at Spring Edition
Despite the economic ups and downs in China over the last few years, demand for premium European textiles remains high.
Whether it be premium wool for the flourishing suiting market, ladieswear fabrics, lace & embroidery for high-end domestic brands each with hundreds of stores across the country, innovative yarns & fabrics for the booming sports and activewear sectors, or original pattern designs for the thousands of new online fashion brands, European suppliers remain the go-to option for Chinese buyers looking for quality and style.

As one of the undisputed leaders in the European textile scene, Italy is always a good bellwether of the trends between Europe and China. After a less than stellar 2016, Italy’s fabric exports to the Mainland China and Hong Kong markets grew by 12.4% in the first 10 months of 2017[1]. The expected demand for European brands at Intertextile Shanghai Apparel Fabrics will be most evident in the SalonEurope zone, which features exhibitors from Austria, France, Germany, Italy, Spain, Switzerland, Turkey and the UK, as well as country pavilions & zones from France, Germany, Italy and Turkey.

There is also continuing demand for overseas expertise when it comes to more technical areas such as sustainability and digital printing, solutions to which can be found in the fair’s All About Sustainability area and Digital Printing Zone.

SalonEurope showcases the continent’s full textile expertise
The best of the best from Europe will be on display in this edition’s SalonEurope, with a range of products across the whole textile spectrum on offer. Some of the highlights this edition include:

  • Alumo (Switzerland): celebrating its 100-year anniversary this July, Alumo has undertaken a complete refresh of their brand, highlighting the character of their mill in Appenzell, Switzerland that has deep roots in the local textile industry. This edition, they will showcase a renewed collection of luxury shirting fabrics with intricate designs and added functions such as natural stretch and wrinkle-free, and a newly enlarged, never-out-of-stock ‘Sartorial’ collection.
  • Hatfil Tekstil Isletmeleri (Turkey): a Turkish-Italian joint venture, they offer a huge range of yarns including eco-friendly options such as organic, BCI and fair trade yarns, as well as cotton, Tencel, Amicor, bamboo, cashmere, modal and other varieties.
  • Hohenstein Textile Testing (Germany): offering testing services, OEKO-TEX® services and certifications, the Hohenstein Quality Label and more.
  • Ricamificio Paolo Italy SpA (Italy): an embroidery manufacturer, they have developed a new technique using very thin embroideries to produce a lace-like effect, which can also be customised to the customer’s requirements in no more than four weeks. They have also produced a quilt-like fabric suitable for spring / summer garments which is made from materials such as silk organdie, cotton yarn or lurex to produce a shiny effect.
  • Teseo Tessitura Serica Di Olmeda SpA (Italy): for their summer 2019 collection, Teseo is inspired by the natural elements with increased attention to sustainability with GOTS-certified bio silk and eco-friendly yarns. New articles are lighter and enriched with yarn-dyes, include jacquard stripes and checks, gauze and devoré bands to add transparency, and more.

New collaboration of sustainable viscose suppliers formed in China
While the textile industry in China still has a long way to go in terms of sustainability, genuine progress is being made at both a government and company level. January of this year saw the implementation of a new environment protection tax, with companies charged for noise, air & water pollution and generating solid waste[2]. Replacing a pollutant discharge fee that had been in place for 40 years, the new tax is set by local governments – with some of the regions suffering from worse pollution setting higher rates – and also incentivises companies with lower emissions.

In another encouraging move, 10 leading global viscose producers in China have come together to form the Collaboration for Sustainable Development of Viscose (CV) to promote the sustainable sourcing and responsible production of viscose. These 10 producers collectively account for over 50% of the world’s viscose staple fibre production, and have partnered with two trade associations to adopt a sustainability roadmap for the viscose industry. Built around credible international sustainability standards and programmes, the CV Roadmap aims to provide guidance to viscose producers on sustainable sourcing and production practices.

The CV collaboration will make its debut appearance in the fair’s All About Sustainability zone, where visitors can learn more about this initiative, as well as sustainable developments in the Chinese textile industry. Apart from an educational programme and garment display area, the zone will also feature a number of exhibitors other than CV.

Digital Printing Zone debuts at Spring Edition
While digital printing is rapidly gaining traction in the global textile industry, this is especially so in China due to its potential to reduce pollution during the production process. Amongst the exhibitors looking to take advantage of this in the fair’s new Digital Printing Zone is MS Italy, a market leader in the design, development and distribution of innovative digital ink-jet printing systems and associated consumables, which serves the high-end, roll-to-roll textile printing and specialty material markets. Also exhibiting is DIGITEX which will introduce the latest digital- and inkjet-printed natural and manmade fabrics.

Apart from digital printing exhibitors, a day-long forum will inform fairgoers on the exciting possibilities of digital printing. Held on day 2 of the fair, the Fast Fashion and Digital Printing Application Forum features sessions on fast fashion technology & trends and digital printing applications. These are followed by a series of discussions on topics such as flexible supply chains, business opportunities created by digital printing and IP protection. The forum also includes a presentation on the findings of a six-month study conducted by Fashion Print, a Chinese publication, for which they visited hundreds of textile companies, printing and dyeing enterprises, as well as their suppliers to produce a research paper on the digital textile printing market and technology.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

  • Intertextile Shanghai Apparel Fabrics – Spring Edition 2018 is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. For more details on this fair, please visit: www.intertextileapparel.com. To find out more about all Messe Frankfurt textile fairs worldwide, please visit: www.texpertise-network.com.

[1] http://hk.fashionnetwork.com/news/Italian-textile-industry-back-on-growth-track-in-2017,944760.html
[2] http://www.fibre2fashion.com/news/textile-news/china-imposes-environment-protection-tax-beginning-jan-1-239965-newsdetails.html

 

Source:

Liam Rodden, Messe Frankfurt (HK)

DyStar and CSI launch their Sustainable Color and Trend magazine ©DyStar
DyStar and CSI launch their Sustainable Color and Trend magazine
18.09.2017

DyStar and CSI launch their Sustainable Color and Trend magazine

As a combined effort of the CSI color team and DyStar’s technical experts, DyStar and CSI are launching the first 2 issues of the Sustainable Color and Trend magazine with Cadira® color palettes.

This new magazine inspires Designers and Color Managers by offering palettes and color combinations that are Eco-friendly and Inspired by Nature. Not only does the magazine include a wide range of color palettes, but also color validation in CSI’s Relative Color Popularity (RCP) information as well as sustainable dye recipes that have been formulated based on the Cadira resource optimization process.

The Cadira Concept is a module in DyStar’s Resource Efficiency program. It helps to considerably shorten lead times and reduce water, waste and energy consumption. Cadira Concepts have been developed for different substrates and dyeing procedures. This launch focuses on both reactive dyeing of cotton as well as polyester & recycled polyester dyeing.

As a combined effort of the CSI color team and DyStar’s technical experts, DyStar and CSI are launching the first 2 issues of the Sustainable Color and Trend magazine with Cadira® color palettes.

This new magazine inspires Designers and Color Managers by offering palettes and color combinations that are Eco-friendly and Inspired by Nature. Not only does the magazine include a wide range of color palettes, but also color validation in CSI’s Relative Color Popularity (RCP) information as well as sustainable dye recipes that have been formulated based on the Cadira resource optimization process.

The Cadira Concept is a module in DyStar’s Resource Efficiency program. It helps to considerably shorten lead times and reduce water, waste and energy consumption. Cadira Concepts have been developed for different substrates and dyeing procedures. This launch focuses on both reactive dyeing of cotton as well as polyester & recycled polyester dyeing.

The reactive-issue – Inspired by Nature – offers color palettes with softer, muted tones, levels of neutrals and earthy shades of green. The recipes are based on DyStar Levafix® and Remazol® combined with Sera® chemicals for an optimized dyeing and wash-off process.

The Polyester issue offers more vibrant color options with saturated colors and brights for active wear and outdoor clothing and accessories. The recipes are based on Dianix® dyes and the dyeing process can be optimized by use of the Optidye® PES program.

“We are conscious about our environment so we wanted to create a magazine with an ecological color and optimized processes so that our customers can pick the right color that will help them reduce their environmental impact in the design process.” Says Ron Pedemonte, VP of Sales and Marketing Americas.

CSI will fcus more on color palettes with ecological dyes and low impact processes when offering color and trend information to customers in the future. More eco-friendly color palettes will be available very soon.

More information about CSI color trends and the Cadira process is available in the DyStar Website and CSI Website. www.dystar.com / www.csicolors.com

Source:

DyStar Press Info