From the Sector

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

In the marine sector, the demands placed on textiles are not only high in terms of fire protection, but also with regards to light resistance and durability. This is particularly true for textiles used in outdoor applications. These must be extremely robust, as they are exposed to moisture and sunlight. To meet these requirements, Trevira CS has launched a range of 30 new spun-dyed, UV-stable filament yarns. Besides color depth and durability, spun-dyed yarns offer another advantage: They are more sustainable because the fabrics made from them can be produced in a more environmentally friendly way than textiles that are dyed in one piece or consist of brightly colored yarns. In fabric production, a large share of resource consumption goes to the dyeing and finishing of fabrics as well as the use of chemicals and water. However, with spun-dyed yarns, these processing steps are unnecessary – the yarn immediately comes out of the spinneret in the desired color, reducing the products’ environmental impact.

The topic of sustainability is also taken up in other Trevira CS products. For example, Trevira CS fabrics are available in recycled versions. They consist of fiber and filament yarns obtained in different recycling processes. Filament yarns are produced using recycled PET bottles, they contain 50% post-consumer recycled material. Recycled fibers are obtained using an agglomeration plant and in further processing steps from residual pre-consumer waste from production. They consist of 100% recycled material (pre-consumer recycling). All flame retardant recycled Trevira® products are GRS (Global Recycled Standard) certified.
Fabrics made from these yarns are marked with the Trevira CS eco trademark. The prerequisite for this is a recycled content of at least 50%. Among the fabrics presented at the Trevira CS trade fair stand are 8 fabrics bearing the Trevira CS eco brand.

The long-term goal in developing sustainable products is undoubtedly to enter a circular economy. For this new path, an innovative Trevira CS product development was launched, producing flame retardant fibers and filament yarns from chemically recycled raw material. In this case, the basic raw material for the chemical recycling was PET bottles, but essentially it could be most any other PET recyclables, such as packaging material or even textiles. Chemical recycling involves depolymerization, a sequence of chemical reactions in which the polymer chains are broken down again into their original components, i. e. the monomers. In a further processing step, impurities are removed. Before the polymerization process is initiated, a small amount of MEG (mono ethylene glycol) is added.

The same technology used to produce the original (virgin) raw material for Trevira CS is also used here. The flame retardant modification is added during polymerization. In this way, the flame retardant properties are indelibly anchored in the polymer.

By recycling valuable materials such as packaging material, waste can be avoided. The raw material obtained from the recycling process is comparable to the original material can be used again in high-quality products.

The Dibella sales team is growing. Since May 1st 2023, Marvin Groß-Hardt has been supporting the company's national and international customers.

Dibella welcomes Marvin Groß-Hardt, an experienced sales employee, to the team. The trained wholesale and foreign trade merchant and graduate in business administration brings many years of experience in supporting and advising customers. He is also familiar with the special features of contract textiles due to a previous position in product and sales management for hotel beds and bedding.

At Dibella, the 30-year-old from Bocholt is responsible for looking after existing customers and building up new customer relationships at home and abroad, and will establish new contacts.

International technology group ANDRITZ has successfully started up the new velour loom it delivered to Foss Floors, Rome, United States (GA). The loom produces flooring from recycled plastic for a wide range of applications. Start-up took place in early 2023.

ANDRITZ is one of the global market leaders for supply of nonwoven production technologies, with a full range of needling technologies, including velour equipment, which allows customers to address a variety of applications such as automotive, household, flooring, acoustics, geotextiles, filtration, and synthetic leather.

Foss Floors is a leader in needlepunched felt products in North America. Its facilities are located in Rome and Chatsworth, Georgia, and it distributes a vast array of flooring products worldwide. One of the company’s key strengths is its agility for product diversification to satisfy customer needs. Foss Floors also strongly expresses its unwavering commitment to environmentally sustainable manufacturing.´

Intertextile Shanghai Home Textiles – Spring Edition is set for a renewal. After last year’s brief pause, 283 exhibitors from 5 countries and regions will showcase their latest innovations at the National Exhibition and Convention Center (Shanghai) during this traditional peak sourcing period. The fair will be held concurrently with Intertextile Shanghai Apparel Fabrics – Spring Edition, Yarn Expo Spring, CHIC and PH Value from 28 – 30 March 2023.

Comprehensive range of products zoned for easy sourcing
The 27,000 sqm gross exhibition space in hall 5.2 will host suppliers in multiple product categories, such as bedding, towelling, table and kitchen linen, home textile technologies, and textile designs. Several product pavilions and zones will be formed to encourage efficient sourcing, with areas designated for quality bedding, towelling, feather and down duvet fillings, quilt fillings, intelligent equipment and upholstery fabric products. Buyers looking for sustainable fibres, yarns and fabrics may be interested in sourcing at the Lenzing Group’s brand new centralised Lenzing Home Textile Satellite Pavilion. With Lenzing joined by eight of its Chinese downstream manufacturers, the pavilion will showcase the various home textile applications for the Austrian company’s wood-based TENCEL™ fibres.

Other well-known international and domestic exhibitors include Cotton Council International (CCI), Zhangjiagang Coolist Life Technology, Guangdong Kulida Down, Wujiang City Yunjie Textiles, Yantai Pacific Home Fashion, Sunvim Group, and Jiangsu Goostars Hometextiles. These suppliers, and many more, will present their up-to-date products to meet the sourcing demands of buyers from different channels.

Programme
At every edition, Intertextile Shanghai Home Textile’s fringe events keep fairgoers informed on a variety of topics, allowing exhibitors and visitors alike to stay up to date with the latest market trends and make informed business decisions.

Aligning with the fair’s general direction on promoting sustainability, and to satisfy the industry’s needs, representatives from Lenzing will be holding an exclusive seminar about the e-commerce opportunities surrounding eco-friendly TENCEL™ products’ sleep enhancing qualities. Other presentations and discussions that touch on sustainability will also be available under the fair’s Textile & Technology event theme.

With consumers globally paying more attention to health issues and increasing their spending on health products, the home and contract textile industry is also a party to this rising trend. To this end, seminars discussing traditional Chinese medicine and how it relates to different health issues will be held on day one. Their crossover topics include how aromatherapy can encourage high-quality sleep, as well as an introduction on the innovation of traditional medicinal textiles.

Moreover, the well-known Chinese retailer JD.com will co-host an event that promotes home textile products made with Chinese cotton. Several talks will focus on different aspects, such as the products’ quality and the overall potential of this industry aided by government policies.

After China’s relaxation of border restrictions and other pandemic control measures, it is now easier for domestic and overseas buyers to visit their Chinese suppliers at the fairground, for the chance to touch and feel their desired products.

• Longer parking times for greater efficiency

Since 2018, Oerlikon Barmag has been offering the market’s only currently available concept for high-end home textile applications using the POY and DTY process. The spinning concept with the WINGS HD winding unit in conjunction with an automatic eAFK Big V Multispindle texturing machine manufactures high-titer yarns with maximum machine efficiency.
 
“We have correspondingly modified WINGS HD in order to once again better align the increased requirements of these special yarns to the spinning process and make everyday production even simpler for our customers”, comments Stephan Faulstich, POY Process Technology Manager. The parking times are extremely short when winding high titers. We have increased the parking times by up to three times in the case of the new WINGS HD models. To this end, the parking time for a 300d/384f yarn, for example, has been increased from a standard 6.5 min. to 15.7 min. – and, in the case of a 400d/192f yarn, from 4.3 min. to 10.3 min. This makes the doffing process more even, hence increasing doffing reliability.

At the same time, the draw unit now has a more flexible design, meaning that two-godet operation is also possible in the case of products with low overall titers. This has a positive impact on the winding unit’s energy consumption.

12 POY packages of up to 600d/576f (final) are produced in the spinning process using WINGS HD 1800. This is made possible as a result of an additional godet, which ensures that the high yarn tensions developing in the process are reduced to the yarn tensions common in the case of the winding process to date. At the same time, the newly-developed suction unit with the accompanying yarn cut-ting device (yarn collecting system) ensures – both during string-up and in the event of a yarn break – reliable handling of the yarn with an overall titer of 7,200 den (final).

Whereas DTY yarns up to 1,200 den and with up to 784 filaments have in the past, as standard, been plied from four POY 300d/192f bobbins using DTY machines, high titers can also be manufactured directly using the WINGS HD take-up machine. Combining the WINGS HD and the eAFK Big V allows all available winding positions to be utilized during texturing.

HeiQ will present a host of innovative technologies to battle those enemies of sleep represented by heat, odor, and inanimate allergens, thereby addressing one of the most underrated elements that hinder a healthy life: a good night’s sleep.

HeiQ has developed technologies that promote better sleep quality for all:

• HeiQ Cool - one of the first textile technologies to deliver both instant contact cooling and continuous evaporative cooling for optimal well-being during sleep.
• HeiQ Mint - a plant-based deodorizer that controls odor development on textiles, providing fabrics with a long-lasting odor control capability that keeps textiles smelling fresh for longer.
• HeiQ Allergen* Tech - a 100% biobased, proprietary technology that reduces exposure to allergens such as house dust mite matter, and pet allergens with the help of active probiotics. The technology is tested and certified by an accredited lab, BMA Labor in Bochum, Germany, and has been granted the Allergy UK Seal of Approval by The British Allergy Foundation.

These effective ingredients are already being applied to final products by HeiQ’s partners. Among them are Trendsetter/John Lewis pillows, duvets, and mattress protectors (with HeiQ Cool & HeiQ Allergen Tech), Trident Jiva Hypoallergenic bed linen (with HeiQ Allergen Tech), Belfama shower towels (with HeiQ Mint), and Lameirinho bed linen/bed sheets (with HeiQ Allergen Tech).

The above mentioned and HeiQ will showcase their new products at Heimtextil 2023 in Frankfurt, Germany, 10- 13 January 2023.

As part of an ongoing investment programme ensuring it remains at the forefront of advanced technology for carpet production, West Yorkshire, UK-headquartered Phoenox Textiles has recently installed a new two-metre-wide shearing line supplied by BTMA member Sellers Textiles Engineers.

Phoenox, which has been family owned since its foundation in 1954, develops original creative flooring design concepts for retail brands. Its products are sold through high street outlets, department stores and volume retailers across Europe and North America, in addition to substantial online and catalogue-driven business. All told, the company’s 24-hour parcel service dispatches some 3.2 million orders every year.

Operating from two manufacturing sites, Phoenox manufactures an annual 1.7 million metres of flooring in the UK. Over a combined area of 1,700,000 square metres, the two plants are equipped for tufting, backcoating, cloth printing and finishing along with automated cutting, sewing and packing.

In addition to the Sellers shearing line, other recent investments for the UK operations have included three new advanced tufting machines and a high-speed Sellers backcoating line equipped to handle widths of up to two metres and coat at six metres per minute. Washable and dyeable foams and eco-friendly applications in different weights are applied for many product areas.

The company’s state-of-the-art Chromo jet printing process line is meanwhile the only one of its kind in the UK, with its 256 jets making possible designs in up eight colours per pattern. With sustainability very much at the forefront of the company’s approach, Phoenox recycles most of its paste and inks and uses organic options wherever possible, as well as recycled water.

“We operate a piece dye colour cloth programme and can dye nylon and cotton with weights of up to 500kg per load, working with direct, organic, vat and reactive dyes,” says Mosley. “We also offer computerised and weighed commission dyeing. Computerised automated cutting machines and photocell pattern recognition enable us to cut at high speed in most cloth densities. With finishing and sewing though, it’s all about the detail, and our team have years of experience and hand-finish our products on traditional high-speed machines.”

The new Sellers Hybrid Shearing Cylinder can provide a competitive edge for manufacturers which is currently being proven in the field, including at Phoenox. It’s one of a number of new innovations BTMA members are planning to showcase at next year’s ITMA exhibition in Milan.

International technology group ANDRITZ has received an order from Jasztex Fibers Inc., Canada, to supply a crosslapper to its site of Pointe Claire (Quebec province).
The line will be dedicated to the production of polyester blends for a wide range of applications, including home furnishing, filtration, blankets, architectural, fire retardant, transportation. Start-up is planned for the second quarter of 2023.

ANDRITZ has been a regular supplier of Jasztex. Over the last years, ANDRITZ provided crosslappers for previous investments in Toronto (Ontario) and Pointe Claire (Quebec).

Jasztex’s nonwoven products are sold throughout the bedding, furniture, filtration, acoustic and thermal insulation, transportation and medical markets.

Turkish company, Makroser Tekstil specialises in manufacturing digitally printed carpets and over the years has become one of the leading suppliers in the sector. Utilising Mimaki’s high-performance TS300P-1800 sublimation transfer printer since 2020, the company has optimised their production potential to meet increasing customer expectations in this growing digital textile carpet market.

Alongside carpets, the company also offers other solutions to the carpet industry by producing backing and other materials

Acting as both a seller and a supplier, Makroser Tekstil has an approximate monthly output of 150,000 square meters of final product and sells about 70-80,000 square meters of intermediate goods per month. “Our market has four main pillars, including chain market groups, export, e-commerce and our own retail network. We have gained serious momentum in the sales of our final products in recent years, and we attach great importance to our sales and marketing processes, in addition to production, so to increase our profitability. We are currently exporting 35-40% of our production, and our branding and e-commerce activities show that we are making significant improvements”, says Makroser Tekstil’s co-founder, Talha Güldest.

Makroser Tekstil decided to invest in a Mimaki TS300P-1800 sublimation transfer printer back in August 2020, with the aim to strengthen their position in the digitally printed carpet market. “The investment in the TS300P-1800 has enabled us to have the capacity to respond quickly to e-commerce orders,” Güldeste commented. “Product quality is the main criterion in the supplies we provide to both online and retail outlets. We made this investment because we saw that we would increase our quality and customer satisfaction in the carpets we print. The Mimaki printer met our expectations, providing the results we wanted from the very first print after installation.” Considering the increased demand, Güldeste aims to further boost their printing capacity with investment in several more Mimaki printers.

Hologenix’s CELLIANT® infrared technology, an ingredient in textiles across many categories including bedding, is now offered in a new line of sustainable dog beds. The first performance fabric product from AVANTI, RESPOND is a wellness collection that promotes good health not only for pets but also for the planet. It is made from 100% recycled PET and uses patented CELLIANT technology for unmatched performance.

CELLIANT transforms the body’s heat into full-spectrum infrared energy. This energy is reflected back to the body, making it possible for the tissue and muscle to absorb it, promoting local circulation and tissue oxygenation. This technology helps keep the body dry and at the appropriate temperature. CELLIANT has been demonstrated to enhance energy, endurance, strength, stamina and comfort as well as promote faster recovery and more restful sleep. The RESPOND beds’ orthopedic memory foam filler adds an extra layer of comfort and wellness.

Introduced at Interzoo in Germany in May, RESPOND dog bedding was the result of determination by AVANTI leaders Raghav and Devika Modi to become champions of pet wellness and performance products while also aligning with the New Delhi, India-based company’s focus on sustainability.  

Ideal for ailing and senior pets, RESPOND beds are made from GRS-certified 100% recycled polyester CELLIANT yarns and orthopedic memory foam and have natural latex-coated bases for extra skid-resistance. AVANTI pet bed covers are removable and washable.

RESPOND dog beds are offered in nine SKUs, three different shapes and three colorways of each shape: grey, blue/grey and green/grey in shades that are associated with wellness.