From the Sector

• Second Session of the International Conference on Cellulose Fibres 2022

Cellulose fibers are a true material miracle as they offer a steadily expanding, broad range of applications. Meanwhile markets are driven by technological developments and policy frameworks, especially bans and restrictions on plastics, as well as an increasing number of sustainability requirements. The  presentations will provide valuable information on the various use-opportunities for cellulosic fibers through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibers and yarns. In addition, examples of non-wovens, packaging and composites will offer a look beyond the horizon of conventional application fields.

The second session of the conference: "New Opportunities for Cellulose Fibres in Replacing Plastics", will focus on questions such as: "What is the impact of the ban on plastics on single-use products?" and "What are the latest regulatory issues and policy opportunities for cellulose fibres?".  This section presents new opportunities for replacing fossil-based insulating materials with cellulose-based technologies that can be used for a variety of applications, from aerospace to mobility, as well as in construction. For the program just click here.

Speakers of the Session "New Opportunities for Cellulose Fibres in Replacing Plastics":

• Nicolas Hark - nova-Institut (DE): Opportunities in Policy for Cellulose Fibres
• Paula Martirez - Stora Enso (SE): Last years Winner Papira® – an Eco-revolution in Foam Packaging
• Stefanie Schlager - Lenzing (AT): LENZING™ Fibres for Sustainable Single use Products
• Sascha Schriever - Institut für Textiltechnik der RWTH Aachen University (DE): Cellulose Aerogel Non-wovens – Sustainable Insulators of Tomorrow

Paper Converting Machine Company (PCMC) is pleased to announce that Stan Blakney has accepted the position of President of its global operations. In addition to leading the company’s US business, as he has since February 2019, Blakney now will assume leadership of operations in Italy and Serbia as well.

Since Blakney joined PCMC, he has led the company’s expansion in flexographic-printing, bag-converting and hygiene solutions, while also continuing to drive growth in tissue converting and packaging.

The creation of this new role enables PCMC to further unify its operations worldwide and expand into new geographies across all of its markets. It also enhances aftermarket support globally for its customers.

“We’ve seen tremendous growth and opportunity with the introduction of STAX Technologies and Hudson-Sharp to the PCMC family in the last two years,” said Blakney. “As we continue to bring our teams closer together, we are able to build our capacity to provide unified industry-leading service in all regions of the world. This includes enhanced access to parts, aligned Industry 4.0 solutions and around-the-clock care. Our goal is to give our customers a strong global service organization, with the support they need to keep their businesses moving forward.”

• Protective masks, everyday masks, disinfecting wipes and surgical gowns are goods in demand in times of corona.
• In their manufacture, textile machines are at the beginning of the production chain.

The production of the textile raw material is the first step of the usually multi-stage production processes. Members of the VDMA Textile Machinery Association are at the beginning of this technological chain.

The production of protective masks starts with the manufacture of the filter material, which for surgical masks as well as FFP2 and FFP3 respirator masks consists of fine-pored nonwoven fabric to intercept coronaviruses. In addition to the systems, machines and components used for this purpose, measurement and control technology ensures the highest quality of important parameters such as basis weight and air permeability. Nonwovens used for respiratory masks have to meet the same high-quality requirements as the masks – to ensure the protection of the mask wearer.

Members of the VDMA Textile Machinery Association have reacted to the new market requirements in a very short time and developed new technologies for knitted, warp knitted as well as woven mouth and nose masks that can be produced without the need for sewing. For surgical masks, FFP2 respirators and social distancing masks, a wide variety of other materials and combinations of materials are used (nonwovens, woven fabrics, knitted or warp knitted fabrics and laminates thereof). Elastic bands are required to wear the masks and several association members provide technologies for their production.

Materials for masks can be treated with textile chemicals to make them antiviral and antibacterial. For this purpose, the VDMA member companies offer application systems which apply the corresponding chemicals to fabric webs. As already mentioned, quality assurance is extremely important for medical products. For this purpose, member companies of the VDMA offer software systems with which each mask can be traced through the entire production process.

VDMA members also offer solutions for the assembly of respirator masks, some of which were developed at short notice. These solutions enable respirators to be produced that meet the relevant standards and the highest quality requirements of customers and market surveillance. This applies to systems for the production of surgical masks and FFP respirators. At the end of the production chain, machines are used to pack masks in single or multiple packs.

In pandemic times, the demand for protective gowns (so-called surgical gowns) also increases. The same applies to disinfecting wipes. For these textile products, too, VDMA members manufacture tailor-made machines for production through to packaging. The quality of the products is ensured by means of measurement and control technology.

In the wake of the corona crisis, VDMA Textile Machinery has launched a new series of web events called "Textile Machinery Webtalk". Here, experts from up to four VDMA member companies present their innovative technologies on a specific topic in a maximum of 90 minutes and are available to answer questions from participants. The presentations are held in English. Participation in the web events is free of charge.
Topics of the first two webtalks were:
"Technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks)."
"Technologies for the production of respiratory protection masks (FFP masks and surgical masks)."

The format is well received. Around 180 people from more than 30 countries took part in the first two webtalks. With this format, the VDMA reaches both textile and nonwovens manufacturers who already manufacture these products and companies that want to invest in new business areas.

The next webtalk will take place on 23 July 2020 from 14.00 to 16.00 (CEST) on the current topic "Technology solutions to produce fully-fashioned community face masks." Experts from KARL MAYER, STOLL by KARL MAYER and Jakob Müller will be presenting their technologies for producing everyday textile masks to an international expert audience. Interested parties can register here.

     Experienced people-centric leader to strengthen product and service capabilities

The leadership team of Baldwin Technology Company Inc. has appointed Joe Kline as its new President and CEO, effective January 17, 2020. Baldwin is a leading global manufacturer of innovative process-automation technology for the printing, packaging and converting industries. Acting CEO Kyle Chapman will continue as Baldwin’s Chairman, and devote greater focus to BW Forsyth Partners’ rapidly expanding portfolio. In 2012, Forsyth acquired thenpublic Baldwin and took it private.

Prior to joining Baldwin, Kline served as the president of a division in Eaton’s electrical sector. In addition, his previous experience includes commercial leadership roles at Eaton, Duke Manufacturing and Emerson. He holds a bachelor’s degree in electrical engineering from Ohio University and a Master of Business Administration in international business from Saint Louis University.

Kline’s appointment follows the 2019 appointments of four Baldwin business segment presidents: Rich Bennett at AMS Spectral UV, Tomas Anderbjer at Baldwin Precision Applications, Vince Balistrieri at Baldwin Vision Systems, and Matt Shishikura at Baldwin Japan.