From the Sector

On the occasion of releasing its 2021 Spring Report, EURATEX calls the European Institutions to implement a new Industrial Strategy which will effectively support the European textiles industry. EURATEX welcomes the fact that Textile and Clothing industry is recognised as one of the 14 essential ecosystems of the European economy, but we need to take effective measures to support these sectors, and take into consideration the global dimension.

Economic data for 2020 in EURATEX Spring Report show preoccupying trends. Figures reflect a dramatic contraction in demand and production: EU turnover contracted by -9.3% in textiles (which is in line with the general manufacturing average) and by -17.7% in clothing, compared with 2019. Furthermore, supply chain disruptions and substantial price increases of some raw materials are putting significant pressure on the T&C industries across Europe. The trade deficit for European textiles and clothing jumped from € -47 bln in 2019 to € -62 bln in 2020, an increase of more than 30%, which is almost entirely due to the import of Chinese face masks and related products. Fortunately, more recent figures from the 1st quarter of 2021 indicate some signs of recovery.

That figure illustrates very well today’s political discussions on the future of the European industry. Many European companies have made considerable efforts to adapt their production to the pandemic, but clearly this was not enough. Whether the production cost in Europe is too high or the EU should adapt its procurement rules, the industry needs have a coherent long-term plan to become more competitive and conquer new markets.

EURATEX General Assembly highlighted the critical role of the new EU Industrial Strategy. The inclusion of textiles and clothing in the fourteen ecosystems is a step in the right direction to consolidate the industrial base but we should look also at the global challenges. European companies should continue investing in innovation, design and quality, in combination with a structural move towards more sustainable textiles. At the same time, the EU should create an environment - both inside the Single Market and globally - where everybody plays by the same rules.

During its members meeting of June 2nd, 2021, the European Pultrusion Technology Association (EPTA) elected a new board. All EPTA board members who stood for re-election have been confirmed again. Dr. Elmar Witten, Secretary of the EPTA, is happy about the continuity in the line-up of the EPTA board. "We will continue the current marketing activities to promote the pultrusion process," said Witten.

Thus, the board members for the next 4 years are:
Dr. Luigi Giamundo, ATP srl., Italy (Chairman)
Alfonso Branca, TOP GLASS, Italy
Dietmar Kühne, Ernst Kühne Kunststoffwerk, Germany
Sebastian Mehrtens, Fibrolux, Germany
Eric Moussiaux, Exel Composites, Belgium
Martin Zelinka, Owens Corning, France

Pultrusion is an important and continuously growing segment in the composites industry. It is a continuous manufacturing process of linear composite profiles made of polymeric resins such as polyesters and fiber reinforcement such as glass fibers. Automated Pultrusion Production Technology facilitates today's High Quality and Low-Cost demands by the market.

• Ulrike Neubauer und Gerald Rosner einstimmig kooptiert

Die Mitgliederversammlung von Gesamtmasche hat Dr. Ulrike Neubauer, CFO und Vorstandsvorsitzende der Dr. Zwissler Holding AG (Gerstetten), und Gerald Rosner, Geschäftsführer der strickchic GmbH (Apolda), einstimmig ins Präsidium kooptiert.

Der Beschluss der Mitgliederversammlung, die bereits im April online tagte, wurde nun auch im schriftlichen Verfahren bestätigt: Das Präsidium des Gesamtverbandes der deutschen Maschenindustrie wird um zwei Mitglieder erweitert.

Dr. Ulrike Neubauer ist Vorstandsvorsitzende und Finanzvorstand der Dr. Zwissler Holding AG. Die promovierte Betriebswirtin und gebürtige Berlinerin kam nach Stationen in der Unternehmensberatung, der Chemie-, Maschinenbau und der Automobilzulieferindustrie zur Zwissler-Gruppe.

Gerald Rosner ist Geschäftsführer der strickchic GmbH. Er studierte technische Kybernetik und stieg nach der Reprivatisierung des elterlichen Traditionsbetriebes in Apolda ins Textilgeschäft ein. Neben Mode entwickelt der technikaffine Stricker smarte Textilien.

Gesamtmasche-Präsidentin Martina Bandte freut sich über die Unterstützung im Präsidium: „Frau Dr. Neubauer und Herrn Rosner bereichern unser Gremium hervorragend. Sie vertreten ganz unterschiedliche Bereiche der Maschenbranche und repräsentieren doch gleichermaßen textile Innovationskraft, Qualität und Wertschöpfung am Standort Deutschland.“

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

ITA, as one of the largest institutes on the campus of the excellence University RWTH Aachen, Germany, develops complete solutions from the manufacturing of the fiber itself over the processing of textile intermediates with thermoplastic and thermoset resins, textile-based part manufacturing, capabilities such as braiding, pultrusion and in-situ impregnation of textile preforms. Top 3 focused industries are transportation and particularly the e-mobility sector, building and construction as well as the wind energy sector. Additionally, ITA GmbH is the partner of the industry in R&D, focusing on 8 business segments, providing technology and knowledge transfer, as well as offering comprehensive solutions along the entire textile value chain.

Prof. Dr. Thomas Gries, Director of ITA, explains the background of the strategic cooperation with focus on composites: „Our long-term experience and unmatched know-how with all aspects of continuous fibers, non-wovens and web-based reinforcements allows us to deliver to the composite manufacturers a complete technology and service offer around the development of technical textiles, from the development of glass and carbon fibers to the textile-based processing of composite parts. In all process steps of our research and developments, we focus on sustainable and recyclable solutions, an efficient cost-performance ratio, the possible use of bio-based materials and the reduction of the CO2 footprint. We are glad to cooperate with Dr. Michael Effing and AMAC in order to benefit from his door-opening network in the composites industry. “

Dr. Michael Effing, Managing Director of AMAC GmbH: „I am very happy to support the ITA to generate innovation thanks to further industrial networking and pre-competitive joint projects. ITA is indeed a one-stop source for composite solutions from the fiber to the cost-efficient manufacturing of final parts. In the context of the Covid-19 impact to the entire industry, it makes sense to bundle forces. Furthermore, ITA, with its long tradition and satisfied customers offers further valuable networking opportunities to the composites industry as well as access to relevant complementary fiber-based excellence and 250 different technologies in their machine-park with an outstanding infrastructure in Aachen.”

National Council of Textile Organizations (NCTO) President and CEO Kim Glas sent a letter to Acting Director of the Office of Management and Budget (OMB) Robert Fairweather, requesting the agency reconsider and approve a proposal to direct U.S. Customs and Border Protection (CBP) to collect Section 301 penalty duties on billions of dollars of Chinese goods currently shipped duty free under Section 321 de minimis waivers.

“There has been an exponential growth of shipments to the United States in recent years that qualify for Section 321 duty-free treatment,” Glas said in the letter. “U.S. manufacturers of textiles, apparel and other consumer goods that routinely sell for less than the $800 de minimis threshold increasingly find their markets and workforce threatened by this tariff avoidance scheme.”

The letter details how the current Section 321 provision is now being coupled with e-commerce to provide billions in duty avoidance on these imported products, including:

• Increased import price pressure on domestic manufacturers of various types of consumer items that routinely sell for less than $800 such as – apparel, footwear, home furnishings, toys, consumer electronics, flatware, auto parts, etc.
• An inability to properly identify and block the importation of adulterated products posing a health and safety risk to consumers.
• An inability to properly identify and block imports of counterfeit products that violate intellectual property laws.
• Enhanced ability of countries like China to access the U.S. market, despite their failure to provide reciprocal access to their markets and their persistent illegal and unfair trading practices.

“Imported merchandise from China that enters under a Section 321 waiver is exempt from all normal tariffs and any penalty duties assessed under the current 301 case. This unreasonable and unnecessary duty exemption severely undermines the purpose and value of the existing Section 301 determination against China as an effort to address its longstanding predatory trade practices,” Glas stated.

“The Biden administration should undertake an exhaustive review of this problem to develop the policy changes needed to mitigate the damaging impact of Section 321 waivers on U.S. workers and manufacturers,” Glas added. “In the interim, it is critical that the OMB and CBP take reasonable steps, such as denying Section 321 benefits to goods covered under the existing China 301 determination [tariffs]. Doing so would be a valuable first step toward limiting the dangerous and growing exploitation of this tariff waiver mechanism.”

The Biden Administration has awarded two contracts to National Council of Textile Organizations (NCTO) members Parkdale Mills and Ferrara Manufacturing Inc., following through on the President’s pledge to procure millions of fully Made in America face masks for community health centers, food pantries and soup kitchens across the country.  A third contract is expected to be awarded to a small business early next week.

North Carolina headquartered Parkdale Mills, the nation’s largest cotton yarn spinner, has partnered with Ferrara Manufacturing, a tailored clothing company based in New York City’s garment center whose workforce is union represented by Workers United/SEIU, to manufacture over 17 million reusable masks. The government said it could purchase up to a maximum of 22.2 million masks under the two contracts announced today. The masks will be Berry compliant and thus 100% U.S.-made.

Ferrara Manufacturing and Parkdale Mills will contract with additional U.S. companies across the manufacturing supply chain, employing nearly 5,000 American workers as a result of these awards.  Parkdale will be utilizing yarn from their facilities in NC, VA, and GA and Ferrara will deploy their cut and sew operations in New York City.

The U.S. textile industry has produced over a billion lifesaving PPE and other medical products over the last year.  Since the spring of 2020, both Ferrara and Parkdale have retooled their production chains to help produce millions of masks and gowns to help workers on the frontlines. 

• Webtalk on material efficiency and recycling for the manmade fiber industry

 
The next VDMA technology webtalk is scheduled for 9th February 2021 (2-4 pm CET). The focus will be on "Material efficiency & recycling technologies for the manmade fiber industry".

The presenters and their topics at a glance:

• Manfred Dobersberger, PureLoop and Wolfgang Hermann, EREMA Engineering Recycling Maschinen und Anlagen will present an integrated shredder extrusion technology for fibrous, textiles scraps, multilayers, films, trays, straps, foam, trays but also polymer mix materials from textiles and even classical thermoplastic composite materials.
• Axel Hannemann, company Gneuss, offers recycling solutions which enable the fibre manufacturer to use their otherwise worthless fibre waste to substitute virgin material in the manufacture of high-quality fibres.
• Markus Reichwein, Oerlikon Manmade Fibers: “We at Oerlikon Manmade Fibers describe a cascaded approach into new technologies as well as different material sources outlining your need for versatile solutions.”

After the presentations, the experts will be available to answer the participants' questions. Registration is possible.

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement today on the White House announcement that President Biden will sign an executive order today, “ensuring the future of America is Made in America by all of America’s workers.”  Further, NCTO launched a new industry video campaign today that outlines steps the Biden administration and Congress must take to re-shore the production of personal protective equipment (PPE) and the entire supply chain for critical products. The video can be found here: MakeAmericanPPE.

National Council of Textile Organizations President and CEO Kim Glas said:
“We commend President Biden for taking action in his first days in office to strengthen our domestic supply chain and manufacturing base with a “Made in America” executive order directing the federal government to spend taxpayer dollars on American-made goods produced by American workers using American-made components.

Increasing the domestic procurement threshold and the price preferences for domestic goods under the current Buy American law will bolster domestic production and stimulate more investment in U.S. manufacturing.

We believe it is critical that taxpayer dollars are used to invest in American manufacturing and our workforce. It is essential that we close loopholes in our Buy America laws, expand application and product coverage of domestic content rules, and close unnecessary contract waivers that undermine American manufacturing and its workforce.
 
We look forward to working with the Biden administration and Congress on immediately strengthening our domestic procurement laws. The COVID-19 crisis was exacerbated when foreign supply chains broke down leaving our frontline workers vulnerable, underscoring the vital need for America to manufacture essential medical products at home. We look forward to working with the Biden administration on implementing this Executive Order, and with members of Congress to push critical bipartisan legislation to help ensure this onshoring effort is fully realized.

We also sincerely thank Senator Sherrod Brown (D-OH) and Representative Kathy Manning (D-NC) for their leadership in sending a recent letter to President Biden, requesting the president prioritize “Made in America” personal protective equipment (PPE) purchases and outlining key steps the administration can take to produce and procure quality American-made PPE for frontline workers.”

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement today welcoming President Biden’s action plan and COVID-19 response, accompanied by a series of executive orders, including an order signed today to strengthen U.S. supply chains by directing federal agencies to use the Defense Production Act (DPA) to address shortages of personal protective equipment (PPE) and related vaccine supplies.

“We are closely reviewing President Biden’s national strategic plan to confront the pandemic and welcome the executive order signed today to strengthen our supply chains by directing all federal agencies to use the Defense Production Act to address shortages of personal protective equipment, vaccine supplies and essential products. These are important steps that will help ramp up critical manufacturing of these essential PPE products and other critically needed supplies like tests and vaccines.”

American manufacturers have been at the forefront of the effort to build a domestic PPE supply chain since the onset of the COVID-19 pandemic. The U.S. textile industry retooled production and operations virtually overnight, producing millions of face masks, isolation gowns, testing swabs and other critical medical textiles.

The industry is dedicated to making significant investments in automated equipment for PPE, but the industry needs long-term, multiyear contracts to help realize that investment.

The deployment of DPA is one of the critical tools that will help incentivize investment in equipment, propel the hiring of U.S. workers and expand these critical production chains.

Since its inception, the DPA has been utilized by the Department of Defense to make critical investments in domestic textile manufacturing infrastructure and capacity, creating private-public partnerships through the government’s capital investments under the DPA and guaranteeing purchases through long-term contracts.  

NCTO applaud President Biden’s action and anticipate further steps including a reported order that will seek to strengthen government procurement of U.S. products in the coming days. NCTO appreciate President Biden outlining the “National Strategy for the COVID-19 Response and Pandemic Preparedness” a series of actions and steps the administration will undertake to deploy and manufacture the vaccine and other essential products.

• Technology webtalk on sustainable denim production

The next VDMA technology webtalk is scheduled for 12th November 2020 (2 pm - 4 pm CET). The topic will be “Sustainable denim production: latest finishing technologies”.

The presenters and their topics at a glance:

Volker Kunzmann, FONG’S EUROPE, will present highly efficient and innovative wet finishing solutions for denim by combining modular systems adapted to the product and customer’s and local specifications.

Hans Wroblowski, A. Monforts Textilmaschinen, will speak about advanced denim finishing technologies with a focus on ecological and economical energy consumption. Furthermore, a new yarn dyeing process will be presented.

Dr. Jürgen Thoms, PLEVA, will present online measuring and control devices for sustainable and cost-effective denim finishing. Latest technologies in straightening, preskewing, moisture management and quality reporting are shown.

After the presentations, the three experts will be available to answer the participants' questions. Free registration is still possible.