From the Sector

In a strongly declining market, Autoneum increased revenue in local currencies by 1.9% in the first six months of 2019 thanks to numerous model ramp-ups. At CHF 1 156.1 million, revenue in Swiss francs reached the previous year’s level (CHF 1 159.4 million). All four Business Groups outperformed the market. The turnaround program in North America is showing progress, but the persisting operational inefficiencies at two US plants continue to impact the profitability of the entire Group, as already communicated. Accordingly, EBIT fell to CHF 16.4 million in the first semester, while the anticipated negative net result totaled CHF –6.0 million.

The weak global macroeconomic environment, ongoing trade disputes and the resulting uncertainty among car manufacturers and consumers led to a further sharp decline in global light vehicle production in the first half of 2019. In this difficult market environment, Autoneum was able to increase its revenue by 1.9% in local currencies in the first six months compared to the prior-year period, particularly thanks to numerous model ramp-ups. At CHF 1 156.1 million, revenue in Swiss francs reached the prior-year’s level (CHF 1 159.4 million). While the number of vehicles produced in all regions declined, Business Groups (BG) North America, Asia and SAMEA (South America, Middle East and Africa) grew and outperformed the respective market developments, two of them significantly. Only at Business Group Europe did the sharp drop in production volumes among vehicle manufacturers result in fewer call-offs and lower year-on-year revenue.

Assuming social responsibility and acting sustainably has been Autoneum's focus since it became an independent company. In order to achieve the best results possible, the Company last year has defined a number of quantitative and qualitative targets in the areas of “Sustainable Products and Production Processes”, “Fair and Attractive Workplace”, “Good Corporate Citizenship” and “Responsible Supply Chain Management” for 2025. In all these areas Autoneum has achieved important successes already in 2018.

Through the consistent implementation of environmental efficiency projects – a total of over 80 worldwide – Autoneum reduced its environmental impact further in 2018. For example, both the amount of waste (–5.9%) and water consumption (–13.4%) have fallen sharply. At the same time, various plants – particularly in Asia and North America – have expanded their recycling capacity, significantly increasing the amount of production waste reused in the manufacturing process (14.9%).

To further improve working conditions especially in production, measures were taken in all Business Groups in 2018 to enhance occupational health and safety and well-being in the workplace. A global employee satisfaction survey conducted in fall last year has confirmed the first positive effects of these measures.

A complete overview of all targets and activities during the past year can be found in the Corporate Responsibility Report 2018 and is available at www.autoneum.com/corporateresponsibility/.

• Exclusive market insights, best practices and inspirational thoughts, alongside previews of Kornit’s new dedicated polyester printing technology

Kornit Digital, (NASDAQ: KRNT), a global market leader in digital textile printing technology, invites all textile printers, garment decorators, Kornit users, prospective customers and anyone who is curious about the latest trends and technology in digital textile printing, to its “Kornit Discover” events.

Taking place April 3-4 in the New York Metropolitan area, April 11-12 in Duesseldorf, Germany and April 15-17 in Hong Kong, each event will feature educational workshops with real-world insights delivered by high-level guest speakers. Highlighting the North American event will be a keynote by Breakaway Sports owner Scott Goldstone, multiple case study presentations, and a panel discussion with editors of key publications serving the imprinted apparel industry. The European event will feature a keynote called “The Future of Retail” by futurist Kai Gondlach, a digital transformation review of the textile industry by Tansy Fall, editor-in-chief of Digital Textile 4.0 and an insightful chat with Kornit user Shirtracer, Nuremburg. The Asian instance will feature Ron Gilboa as main speaker and Kornit’s customer Paintory.

Omer Kulka, Kornit Digital’s Vice President of Marketing and Product Strategy, said: “There are still a lot of perceptions and opinions in the market about direct-to-garment printing and what its opportunities and limitations are. Printing on dark polyester is a prime example: there is an opinion in the market that digital printing and dark poly don’t go well together, and we just lifted this barrier. With Kornit Discover, we are creating an industry event that will challenge these established thinking patterns. In fact, we will transform the way visitors think and print!”

Hexcel is exhibiting at the Aero India show for the sixth time, continuing to support customers in the Indian subcontinent and throughout Asia. This year’s show takes place in Bangalore from February 20-24 (Stand AB2.5D, Hall AB) to promote a range of carbon fibers and composites that are benefiting Indian aerospace manufacturers for commercial aircraft, helicopters and space programs.

To coincide with the show, Hexcel is announcing the opening of its new sales office, Hexcel Composites India LLP. The office is located in Bangalore and will be fully operational in March 2019. Mr Vijay Sharma, Sales Manager, and Mr Ram Kumar, Technical Representative, will manage the sales activities and support key customers in the region.

Hexcel has supplied carbon and glass fiber fabrics, prepregs, honeycombs and adhesives to Indian aerospace companies for more than 28 years, including Hindustan Aeronautics Ltd (HAL), National Aerospace Lab (NAL), Indian Space Research Organisation (ISRO), Vikram Sarabhai Space Centre (VSSC) and TATA Advanced Materials.

Hexcel’s high strength and intermediate modulus carbon fiber range has been augmented by the launch of HexTow® HM63, a high modulus carbon fiber that has the highest tensile strength of any existing HM fiber. HexTow® HM63 provides outstanding translation of fiber properties in a composite, including superior inter-laminar shear and compression shear strength. HexTow® HM63 is therefore ideal for any high stiffness and strength-critical applications including space, satellites, UAV, commercial aerospace and helicopters.

• Innovative BCF S8 platform technology opens up new carpet yarn industry markets for Oerlikon Neumag customers

World premiere at the DOMOTEX World Trade Fair for Carpets and Floor Coverings in Hanover: between January 11 bis 14, 2019‎, Oerlikon Neumag will be showcasing its innovative new development, the BCF S8, to a wide audience for the very first time in Hall 11, Stand B36. Whether commodities or niche products – the new BCF S8 platform technology offers manufacturers of BCF carpet yarns decisive arguments for responding to constantly rising cost pressures and the trend for greater efficiency and quality in fiercely-competitive markets. World record: the system achieves never-seen-before spinning speeds and is able to simultaneously spin up to 700 filaments and produce fine titers of up to 2.5 dpf. This superlative performance is guaranteed by numerous individual innovations in the new platform and, for the first time, also in a new human-machine interface (HMI)-based control system, which opens the door to the digital age of smart carpet yarn manufacturing wide. At the ITMA ASIA 2018, the Oerlikon Manmade Fibers segment had already announced that it would be presenting revolutionary solutions in 2019 – both in hardware and software. And the DOMOTEX marks only the start.

According to manufacturer information, the new BCF S8 is the most efficient Oerlikon Neumag BCF system of all times. “We have succeeded in achieving a new level of greater productivity and even broader product diversity. These allow our clientèle to better cater to changing market requirements and achieve a competitive edge in tough market conditions”, explains Martin Rademacher, Vice President Sales Oerlikon Neumag. As a pre-taste, the machine specialists from Neumünster are serving up performance figures and results from comprehensive trials conducted at their own BCF technology center as well as from two pilot systems which have been tried and tested within the market for months now.

BCF S8 performance in numbers
With up to 700 potential filaments per yarn end, the BCF S8 is raising the benchmark considerably compared to the Oerlikon Neumag S+ BCF system (400 filaments) that has dominated the global market to date. Oerlikon Neumag guarantees fine titers of up to 2.5 dpf. Furthermore, the process speed is higher than ever before – 3,700 m/min (winder speed). This permits throughputs of up to 15 percent greater compared to predecessor technologies. Overall, system efficiency is 99 percent – almost unbeatable. True to the Oerlikon Segments Manmade Fibers segment e-save philosophy, energy savings of up to 5 percent per kilogram of yarn are achievable.

BCF S8 innovations – from straight yarn paths to large cooling drums

This comprehensive progress has been achieved with numerous smart innovations. To this end, one key element above all has been optimized. The yarn path from the spinning system to the new, large cooling drum has now been almost completely straightened. This yarn path, unique to the BCF market to date, ensures that the individual filaments are subjected to minimum friction, hence once again considerably reducing yarn breaks and optimizing the overall production process. Especially noteworthy here are the, for the first time, straight yarn inlet in the texturing head – guaranteeing superior yarn quality.

And the considerably reduced distance between the heating godet duo and the texturing head also has a positive impact on the texturing process. It ensures a more even twist to the yarn and reduces the compressed air consumption. Furthermore, the texturing chambers can be removed individually, which additionally shortens servicing times. The now closed units also provide the best possible protection for the texturing jets and lamellar chambers.

The 800-mm diameter cooling drum optimally and gently cools the filaments. And this has a positive influence on the yarn quality. The new cooling drum is now equipped with a V groove for all polymers (PET, PA6 and PP) as standard.

The RoTac3 tangling unit, already established within the market, once again reduces the compressed air consumption by around 50%, while the newly-developed Witras III-37 winder achieves production process speeds of 3,700 m/min.

First intuitively-operable human-machine interface (HMI)
The new BCF S8 is the first Oerlikon Manmade Fibers segment system equipped with the innovative human-machine interface (HMI) for intelligent controlling and monitoring. In this case, the interface between man and machine has been oriented on the daily requirements of users in BCF production. With its new ‘look and feel’, it supports intuitive operation and offers direct access to important information as well as actual and target values at each take-up position by means of a touch screen. A completely new ‘alarm philosophy’ also simplifies troubleshooting and malfunction analysis. “This smart HMI system is a logical step in the digitalization of our products”, explains Dr. Friedrich Lennemann, Vice President R&D Oerlikon Neumag.

New products for photopolymer and laser sinter printing methods from BASF 3D Printing Solutions GmbH (B3DPS) are on show from November 13 to 16 at Stand F20 in Hall 3.1 at this year’s formnext fair in Frankfurt. The BASF subsidiary is also announcing several new partnerships for the development and distribution of groundbreaking 3D printing solutions and products.

B3DPS has entered into a strategic partnership with the US company Origin, San Francisco, California for the further development of photopolymer printing processes. “Within the framework of an open business model, we are combining BASF’s material know-how with Origin’s expertise in printer software programming and the manufacture of the corresponding hardware,” explained Volker Hammes, Managing Director BASF 3D Printing Solutions GmbH. The collaboration has already shown the first signs of success. Origin has developed a new printing method where BASF’s new Ultracur3D photopolymers can be processed particularly well. The technology offers an optimal combination of a good surface finish and high mechanical stability, while also allowing for high material throughput.

B3DPS is working together with Photocentric, a manufacturer of 3D printers and their corresponding software and materials, on the development of new photopolymers and large-format photopolymer printers for mass production of functional components. Based in Peterborough, UK and Phoenix, USA, Photocentric has developed and optimized the use of LCD screens as image generators for its own printing systems. The two partners plan to offer the industry 3D printing solutions that replace parts of traditional manufacturing processes such as injection molding for small series, as well as enabling the production of large components.

The objective of the cooperation with Xunshi Technology, a Chinese printer manufacturer headquartered in Shaoxing, and operates in USA under the name Sprintray, will be opening new fields of application in 3D printing for the Ultracur3D product range of B3DPS.

Ultracur3D specialties for photopolymer printing processes
B3DPS has grouped well-established and new photopolymers designed for the respective 3D printing processes under the brand name Ultracur3D. BASF has developed unique raw materials for its new products that enable special part properties.
“Our Ultracur3D portfolio enables us to offer customers various UV-curable materials for 3D printing that provide far better mechanical properties and higher long-term stability than most available materials,” explained András Marton, Senior Business Development Manager at B3DPS. He added: “These materials have been developed for functional components that are subject to high stress.”

Expansion of distribution network for filaments
Innofil3D, a subsidiary of B3DPS, is entering into a partnership with Jet-Mate Technology, based in Tjanjin, China, for the distribution of plastic filaments in China. In parallel, a distribution agreement has been concluded with M. Holland in Northbrook, USA for the distribution of filaments in USA. “Since the USA is the largest market for filaments, we intend to strengthen our activities there,” said Jeroen Wiggers, Business Director 3DP Solutions for Additive Extrusion at B3DPS, adding: “Asia is another important market for us. We will be developing further distribution channels there and putting our Ultrafuse filaments on the Asian market in 2019.”

BASF’s portfolio of filaments for 3D printing are comprised of two categories; the well-established Innofil3D filaments based on generic polymers for conventional applications and polymer-based Ultrafuse filaments for advanced formulations used in demanding technical applications. One of the broadest filament selections on the market, this portfolio covers customer requirements ranging from prototype to industrial-scale production.

SLS: new 3D printing material with fire protection classification
New flame-resistant Ultrasint Polyamide PA6 Black FR meets UL94 V2 fire protection standards and is a new material class for use in selective laser sintering (SLS) processes, distinguished by high stiffness and thermal stability. In cooperation with one of the global leaders of public transportation vehicles, B3DPS has developed new components that meet vehicle fire protection requirements. “Together with our partner, we are currently producing prototypes, spare parts, and small series components, and are working to further improve flame resistance to meet additional certification specifications,” explained Hammes.
BASF introduced Ultrasint Grey PA6 LM X085 at AMUG this spring and now is followed by another product on show at formnext. Ultrasint PA6 Black LM X085 is based on polyamide 6, and can be processed at 175-185 degrees Celsius therefore making it suitable for most current SLS machines.

B3DPS adds polypropylene to its 3D printing portfolio
Through the acquisition of Advanc3D Materials GmbH in July 2018, B3DPS has expanded its range with numerous materials for use on laser sinter machines, including polyamide Adsint PA12, Adsint PA11, Adsint PA11CF and Adsint TPU flex 90.
Ultrasint PP is a special highlight. This polypropylene-based product exhibits outstanding mechanical properties and is frequently used in standard industrial production as it offers a good balance between price and performance. Ultrasint PP is distinguished by excellent plasticity, low moisture uptake, and resistance to liquids and gases. Prototypes and small batches can now be produced from the same material as used for traditional serial production. Post treatments such as thermoforming, sealing, and dyeing can be performed after printing.

A new important partnership marks the path of Itema towards a greener future for the whole denim production chain. Prosperity Textile, one of the main denim producers worldwide, has chosen for its new facility one of the most interesting and sustainable-oriented Itema technologies, iSAVER™ equipped on the Itema R95002denim. Prosperity Textiles is, in fact, one of the early adopters of this new technology chosen for the new plant that the world-famous indigo fabrics producer will open in Vietnam, and that will be exclusively equipped with the latest Itema weaving machine model, demonstrating once again its green, future-oriented approach.

Thanks to its partnership with Itema, Prosperity Textiles makes again a step forward in terms of sustainable innovation, as one of the first denim producers able to successfully turn - even the weaving production - green. A partnership that is planned to be showcased in some of the most important textiles exhibitions worldwide focusing on Asian and denim markets. A path that starts with KingpinsShow, Amsterdam (October 24-25) where the Chinese denim producer will put into the spotlight this brand-new solution aimed at further increasing the eco-driven approach of the company; an important appointment is also in the Itema calendar: the ITMA Asia + CITME 2018 exhibition, Shanghai (October 15-19) where the Italian company showcased the important green step-forward in denim weaving processes and the full range of its innovations.

iSAVER™: the ideal green tool for denim weaving
This new technology, developed by ItemaLab™, the Itema Advanced Innovation Department, isable to completely eliminate the left-hand weft waste, allowing to insert the weft yarns in the fabric without the need of additional yarns. iSAVER™ significantly reduces raw material waste, leading to tangible benefits in terms of machine’s efficiency, cost reduction and energy saving.

Just consider that the weaver will gain a minimum saving of € 2.000 per year per machine, and our planet will gain even more. In fact, for the first time in the weaving industry, a sustainable approach when choosing the weaving equipment is now possible. Thanks to iSAVER™, 1.000 Kg of cotton per machine per year – the 3% of the total raw materials - will be saved, thus avoiding the waste of 20 million liters of water, equivalent to 400.000 showers.

Numbers are clear: the introduction of iSAVER™ clearly sets a new benchmark in terms of sustainability within denim fabric production. Furthermore, the iSAVER™ is one of the key features of the Itema R95002denim, the rapier weaving machine born and designed to weave denim guaranteeing to weavers superior textile quality, outstanding user-friendliness and tangible energy and raw materials saving.

A joint eco-driven path
Itema, understanding very well the importance of saving resources and energy to drive the textile production in the direction of a more conscious manufacturing, focused its attention to develop breakthrough weaving solutions and in 2018 introduced to the market the iSAVER™, a revolutionary device dedicated specifically to denim fabrics able to eliminate the waste selvedge on the left-hand side of the fabric.

This is one of the reasons-why Prosperity Textiles has chosen to adopt this extraordinary technology for its new facility. Today Prosperity Textiles is one of the main denim producers worldwide, counting 1,300 employees and 20 offices worldwide. Moreover, a second state-of-theart denim mill will be inaugurated in Vietnam by the end of 2018.
What makes Prosperity able to stand out on a global scale, is not simply its products high quality but the ability to conciliate flawless denim fabric production with a sustainability-oriented mindset that permeates every stage of their textile supply chain.

Prosperity, indeed, adopted innovative green manufacturing concepts through all stages of the company’s operations, from product development, raw materials procurement and processing, to natural resources and energy utilization including waste management. Prosperity’s denim production is based on the employment of best quality yarns available on the market, while still targeting the most sustainable sources, from BCI to organic, recycled cotton, and from Tencel™ Lyocell to Sustans™, in 2017, more than 20 million yards fabric sales from Prosperity are with sustainable fibers inside.
The introduction of eco-friendly dyeing and finishing practices allows the company to create beautiful indigo shades and performance denims, with less water and energy consumption compared to the traditional systems. Last year, Prosperity produced 20% more fabrics than 2016, yet the water and electricity use and greenhouse gas emission was down by 11.5%, 7.9% and 5.4% respectively.

In this continuous process of improvement and contribution to a greener industry and planet, plays a central role the recent renewal of the historic partnership and strategic alliance with Itema – the leading manufacturer of cutting-edge weaving solutions – which represents the natural evolution of a constant process of research for partners able to support Prosperity Textiles’ growth as a sustainable company.
Up to now, all innovations and efforts done in this regard addressed the traditionally more polluting steps of the denim production. In fact, if the development of green technologies is nowadays spread in many fabric processing stages, such as finishing and dyeing, weaving was not yet capable to provide sustainable solutions to weavers.

ITMA ASIA + CITME 2018, Asia’s foremost trade fair dedicated to textile machinery, is once again marked by a significant presence of German companies both in their number and in the quality of their technology. Visitors to the fair will have an opportunity to appreciate the high level of technology being proposed by more than 100 exhibitors from Germany, including more than 80 VDMA member companies. They cover nearly all different machinery chapters with a focus on spinning, nonwoven, weaving, knitting, warp knitting and finishing. The overall exhibition space occupied by German machinery manufacturers is more than 7,000 square meters, confirming Germany’s leading position among exhibiting foreign countries. The German exhibitors increased their booth space by approximately 15 % compared to 2016.

“Choose the original - Choose success" is the message of the VDMA Textile Machinery at this trade fair. On the occasion of the VDMA press conference on the opening day of ITMA ASIA, Ms Karin Christine Schmidt, Technical Director VDMA Textile Machinery, emphasised: “Copycat machines may look similar to the systems they are designed to emulate. But only originals do not simply follow but are pacesetters of technological progress.” Original technology is a keystone of innovation. It has the potential to successfully turn visions of entirely new possibilities in the textile production into reality.

This approach is visualised at the VDMA booth. The stand achieves attention and emotion through the picture motif: Neuschwanstein Castle. This world-famous tourist magnet is more than that: it is also a successful original. A vision, which could be successfully implemented in the long term through innovation and technology!

During the press conference, 18 spokespersons of renowned VDMA member companies showed how original technology can indeed play a major role in China’s and other Asian nation’s efforts to increase the resource efficiency of the textile industry and to interconnect information technology and manufacturing processes.  

Topics of the companies included automation, performance improvement, quality, sustainable solutions (raw material, energy, water saving), Industry 4.0 (in China called intelligent manufacturing), digital AR/VR services, platforms and software.

You are welcome to explore the speakers' statements in the atached PDF.

• Back to Seoul: JEC Asia gathers the composites industry in Korea for its 11th edition
• JEC Asia, November 14-16, 2018 – COEX Center, Seoul, South Korea

Paris - After the record-breaking figures of the 2017 edition, that marked the move of JEC Asia from Singapore to Seoul, the event is returning to the capital city of the Republic of Korea with a strong program, not only on the exhibition floor, but also in the conference sessions and all services at the disposal of every attendee.

“We are very grateful for the support of the industry, government bodies, and academics, regarding the evolution of JEC Asia, that has led to the success of the platform. Indeed, 90% of the show floor is already booked which bodes well for the preparation of the event.” Commented Christian STRASSBURGER, Events Director Asia for JEC Group.

“On top of that, the event is truly international, as 45% of the exhibitors are coming from outside Asia. JEC Asia will welcome pavilions from Germany, France, Italy, Japan, China and Singapore, as well as the major composite clusters in Korea.” He added.

FOCUS ON THE AUTOMOTIVE INDUSTRY

The future of mobility is a hot topic for composite materials and JEC Asia will represent, promote and provide information about the increasing integration of composites in automotive developments.
Numerous programs will be offered, such as a whole day conference on Composites in Automotive, a Leadership Composites Circle, an Auto Planet, showcasing parts, a B2B meetings program, a JEC Innovation´Award category and Composites tours (site visits of composite-related facilities).

Finally, for the second time, JEC Asia will host the International Carbon Festival, organized by KCTECH and the Jeonju region, with top-notch conferences and international speakers.

Key Figures 2017

• +230 companies
• 6,271 professional visits
• 43 speakers
• 42 countries represented
• 12 JEC Innovation Awards
• 400 B2B meetings
• 2 Composites Tour

JD.com, Inc., China’s leading technology-driven e-commerce company, and Google, announced today that Google will invest $550 million in cash in JD.com as part of a strategic partnership.

Google and JD plan to collaborate on a range of strategic initiatives, including joint development of retail solutions in a range of regions around the world, including Southeast Asia, the U.S. and Europe. By applying JD’s supply chain and logistics expertise and Google’s technology strengths, the two companies aim to explore the creation of next generation retail infrastructure solutions, with the goal of offering helpful, personalized and frictionless shopping experiences. JD also plans to make a selection of high-quality products available for sale through Google Shopping in multiple regions.

“This partnership with Google opens up a broad range of possibilities to offer a superior retail experience to consumers throughout the world,” said JD.com’s Chief Strategy Officer Jianwen Liao. “This marks an important step in the process of modernizing global retail. As we celebrate our June 18 anniversary sale, this partnership opens a new chapter in our history.”

"We are excited to partner with JD.com and explore new solutions for retail ecosystems around the world to enable helpful, personalized and frictionless shopping experiences that give consumers the power to shop wherever and however they want,” said Google Chief Business Officer Philipp Schindler.

Under the agreements, Google will receive 27,106,948 newly issued JD.com Class A ordinary shares at an issue price of $20.29 per share, equivalent to $40.58 per ADS, based on the volume-weighted average trading price over the prior 10 trading days.