From the Sector

The winners of the 2025 IDEA® Achievement Awards and FiltXPO™ Innovation Awards were announced during special ceremonies held April 29 and 30 at the Miami Beach Convention Center in Miami Beach, Florida. Presented at the co-located IDEA®25 and FiltXPO™ 2025 events, the awards celebrate outstanding innovations driving progress in nonwovens and filtration. INDA, the Association of the Nonwoven Fabrics Industry, collaborated with International Filtration News for the FiltXPO™ Awards and Nonwovens Industry magazine for the IDEA® Achievement Awards.

IDEA® Equipment Achievement Award
Dilo Systems GmbH – MicroPunch
The rising energy costs and water shortages have led to a re-evaluation of production methods, with a stronger focus on environmental impact. With MicroPunch, it is possible to reduce energy consumption by approximately 75 percent compared with other consolidation techniques that produce lightweight nonwovens. This technology enhances efficiency and reduces the manufacturing costs and the environmental footprint.

IDEA® Nonwoven Products Achievement Award
Innovatec Microfibre Technology GmbH & Co. KG – InnovaWipe® Water-Soluble Nonwoven
This water-soluble nonwoven is completely biodegradable under both aerobic and anaerobic conditions. It offers excellent resistance to oils, greases and chemicals. It does not leave any microplastics behind, breaking down into carbon dioxide, water and biomass. It also has no ecotoxic effects, is safe for the marine environment and does not cause fatbergs or blockages in wastewater systems – flushable and home compostable.

IDEA® Raw Materials Achievement Award
Woolchemy NZ Ltd. – neweFibre
Woolchemy’s neweFibre is the world’s first hygiene-grade wool, engineered for high-performance, sustainable hygiene products. This fully traceable, renewable fiber enhances moisture management, thermal comfort, and odor control. Seamlessly integrating into production, neweFibre powers innovations like neweFlex ADL for exceptional fluid distribution and skin dryness.

IDEA® Short-life Achievement Award
Egal Pads, Inc. – Egal™ Pads on a Roll
At Egal, we believe pads should be as common as toilet paper.  Our vision is that “pads on a roll” will be put in every toilet stall – where they are needed most – to ensure privacy and dignity to all who menstruate.  Egal pads are manufactured in roll form, 40 individually wrapped on each roll, so they can be mounted on existing toilet paper dispensers or in Egal’s custom-designed dispensers.

IDEA® Long-life Achievement Award
Magnera – Sontara® EcoRE Bag
EcoRE bags are produced entirely from cellulosic fibers, presenting a sustainable alternative to traditional synthetic materials. Made with Sontara fabric certified by OK compost HOME, these bags maintain their durability and strength without the need for added binders, addressing a common concern with compostable goods. With plastic bag bans now in place in many states, Sontara offers a timely and eco-friendly solution for the retail and shopping market.

IDEA® Sustainability Advancement Award
KINDCLOTH™ – PURA HEALTH Insect Repellent – Water Dissolvable Wipes
This wet wipe combines water-dissolvable Hydropol™ technology with a natural formula featuring lemongrass and citronella. Designed for eco-conscious consumers, this innovative wipe provides effective insect protection while leaving no waste behind. Certified biodegradable, flushable, and designed not to create harmful microplastics, it safeguards fragile ecosystems and supports sustainability goals.

IDEA® Entrepreneur Award
Dude Products, Inc.
In less than a decade, the Dude Wipes brand has grown from an entrepreneurial concept conceived in a bachelor’s post-college apartment to a more than $200 million global brand. These flushable wipes have flourished in flushable wipes industry, successfully going head to head against multinational consumer product companies Kimberly-Clark, S.C. Johnson, and Procter & Gamble.

FiltXPO Air/Gas Filtration Award
Greentech Environmental LLC – Greentech Filters with ODOGard®
ODOGard® technology deeply integrates odor-neutralizing polymers into nonwoven and nanofiber filters, offering an innovative, non-toxic approach to indoor air quality. ODOGard® significantly enhances filtration durability and performance.

FiltXPO Water/Liquid Filtration Award
Ahlstrom – BioProtect™
Ahlstrom’s sustainable BioProtect™ material offers superior dye-catching performance for laundry applications. Manufactured from 100 percent naturally derived fibers and OC-Biobinder®, BioProtect™ is both biobased and home compostable, combining premium performance with environmental responsibility.

FiltXPO Filtration Equipment Award
Filtration Advice Inc. – FA-TCO Software
This cutting-edge software provides comprehensive Total Cost of Ownership (TCO) analysis and predictive modeling for air filtration systems. FA-TCO enables data-driven decisions, extending filter lifespans, reducing operational costs, and enhancing overall sustainability in filtration management.

At this year's CINTE Techtextil fair in Shanghai, DILO received the innovation award for its intensive needling technology “MicroPunch”. Recent developments in energy costs, particularly for electricity and gas, and given the increasing shortage of water resources, have led to a shift in thinking over the past few years. Together with economic efficiency, the evaluation of the environmental impact of production has become increasingly important.

For DILO, this meant focusing on needling technology for the fine and lightweight nonwoven sector over the last years. The individual elements of the intensive needling technology underwent a complete revision. It became clear that the high production rates could only be achieved using the two-dimensional kinematics of the needle beam of "HyperPunch" or "CycloPunch." The necessary high feed rates of around 50 mm per stroke, coupled with the highest stitching densities to achieve good abrasion resistance, led to a need of a significant increase of the number of needles and needle density—almost doubling from approximately 20,000 needles/meter/board to around 45,000 needles/meter/board. It also became obvious that ensuring a high efficiency rate in production also required the careful attention to a quick assembly of the needle boards with needle modules. A completely new approach was needed in the design and construction of the needle boards to enable rapid module exchange and achieve a very high mechanical precision.

Previously, needling technology was primarily used for a surface weight range starting at 100 g/m² up to several kilograms per m². The expansion into the range below 100 g/m², and potentially down to 30 g/m², now completes the applicability of needling technology. The intensive needling technology "MicroPunch" opens up an economical field for a wide variety of lightweight nonwoven fabrics that can be produced by a pure mechanical processes. The product characteristics achieved, such as abrasion resistance, are comparable to those of hydroentangeld nonwovens. Needled fabrics tend to have more volume and more stretch while offering similar tensile strength values. These special quality characteristics are particularly interesting for applications in hygiene, medicine, cosmetics, and for technical products.

With this new development, the energy required to produce lightweight nonwoven fabrics has been reduced up to approximately 75% compared to other bonding technologies of this segment.

RadiciGroup participated in the fifth edition of Phygital Sustainability Expo, an event dedicated to the ecological transition of fashion and design brands through technological innovation, which was held in Rome on 4 and 5 June.

During the narrated fashion show, held ion the 4th of June in the evocative archaeological site of the Imperial Forum Museum, RadiciGroup presented a jumpsuit. The jumpsuit is made of Radilon Chill-fit, an innovative nylon yarn - made by RadiciGroup in its production sites with low environmental impact. It guarantees thermal regulation and ensures freshness and comfort throughout the day. The jumpsuit worn during the day can quickly turn into the "basis" of an elegant evening outfit by simply adding a kimono-dress, made in nylon, to ensure complete future recyclability.

The outfit is the result of the collaboration between RadiciGroup and the designer Anita Bertini, a young designer at POLI.Design (an international reference for postgraduate training at Politecnico di Milano): the goal is to propose a wardrobe made of essential, durable and recyclable garments, which offer endless possibilities of matching without ever compromising personal style and commitment to a better world.

Two companies from the Italian textile scenario collaborated on this project as technical partners: Calzificio Argopi for the creation of the jumpsuit and Erco Pizzi for the kimono-dress fabric.

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

DiloGroup will inform about complete lines as well as high speed needlelooms for spunbonds. A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further. The new needle pattern 8000X is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

Another strong pillar of the sales program over decades has been fibre preparation and high speed webforming equipment for other nonwoven technologies. The further development of the high-speed layering principle “Hyperlayer” made progress for better CD strength through a combination of inline cards and crossline card with crosslapper. Particularly, carding machines in a working width above 3.5 m up to 5.1 m have been supplied by DiloSpinnbau as complete high speed carding systems, comprising two or even three cards in a line to directly feed the hydroentangling units of various suppliers. Together with DiloTemafa not only have high throughput rates been achieved in the fibre preparation section of the line but also dedusting filtering and air-conditioning systems have been successfully engineered and integrated.

Together with Sicam, Dilo has combined know-how for hydroentangling technology and therefore can provide complete lines as general contractor including equipment for cutting, winding and packaging.

Another interesting machine is the 3D-Lofter, first presented during ITMA 2019 in Barcelona, which offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts with or without repeat are two examples for this technology which explores new application areas for needlefelts.
The 3D-Lofter technology may also be used “inverted” as “IsoFeed” for filling up bad spots in web mats and thus achieves a better homogeneity of spunlace or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

Dilo, a leading equipment supplier of complete lines for staple fibre nonwoven fabric production, will exhibit at IDEA 2022 in Miami, end of March.
 
The most recent machine concepts from DiloGroup companies DiloTemafa, DiloSpinnbau and DiloMachines will be promoted with the emphasis on new equipment components which improve product quality, increase line capacity and also enable new opportunities in nonwoven production.
 
DiloTemafa will promote the improved bale opener series “Baltromix Pro” with design features for the operating assistance with the I4.0 components “Bale Timer”, cleaning control, better accessibility for maintenance and the “DI-LOWATT” system for energy savings in fibre transport. The proven carding willow with modified workers and separate drives to create the prerequisites for a good fine opening will also be part of the presentation as well as the fine opening stage which may be installed over the material box of the new card feeder FRS-P to achieve a high dosing accuracy in cross and longitudinal direction.  
 
DiloSpinnbau has a new “Unifeed” card feeder (VRS-P) which combines the principle of volumetric charged feeding with the characteristics of a chute feeder but without the conventional overhead trunk which allows for lower ceiling height requirement. The fibre flock matt is condensed by a vacuum delivery apron to give better uniformity of mass distribution. The distribution over the working width is controlled by additional flaps. This feeder can be adapted for medium/fine, coarse/medium or long staple fibres.
 
The “VectorQuadroCard” by DiloSpinnbau incorporates a modular transfer group between breast and main section. The quick change facility of this roller group provides different carding options. The delivery system is also flexible to provide parallel laid, random or condensed web. The preopener section on this card has 4 worker/stripper pairs with five pairs on the main cylinder. Emphasis is on high throughput with good web quality.
 
The revised HyperLayer NT offered by DiloMachines presents the latest state-of-the-art highspeed precision layering technique setting new standards which play an important role especially in hydroentanglement lines. In this application, it is important to achieve layering speeds up to 190 m/minute using sophisticated viscose fibres and a layering width of about 4 m while at the same time having a high layering precision in cross and longitudinal direction.  
 
DiloMachines will also present its portfolio to improve quality and reduce costs. The FutureLine study “3D-Lofter” – first presented at ITMA 2019 in Barcelona – is part of this programme. In this study individual web forming units can deposit fibre masses on freely programmable spots in longitudinal and cross direction thus saving overall fibre mass in applications such as deep moulded parts for the automotive interior. This ability reduces costs in production and operation. The “IsoFeed” concept for a more even flock mat for direct cards and aerodynamic web forming is another interesting field of web mat quality improvement.

• DiloGroup looks forward to participating in the Techtextil India show 2021.

DiloGroup offers tailor-made production systems from one supplier and will inform at this forum in the German pavillon about its portfolio and the latest equipment developments from fibre opening to the finished felt.

A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further by using the new needle pattern 8000X which is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

The “3D-Lofter” which was first presented during ITMA 2019 in Barcelona offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts are two examples for this technology which explores new application areas for needlefelts.

The 3D-Lofter technology may also be used “inverted” for filling up bad spots in web mats and thus achieves a better homogeneity of e. g. spunlace, thermobond or airlay products. The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

With more than 370 installations delivered to the nonwovens industry worldwide, DiloGroup has the necessary know-how and the complete equipment portfolio to engineer the perfect production line for any product specification. The efficiency of Dilo production lines is the result of long-term research work and experience. Apart from machines for needling technology we offer in cooperation with partner companies also production lines including thermobonding and hydroentangling components.

Huafon Microfiber Co. Ltd. has placed orders for three complete, state-of-the-art high capacity needling lines with DiloGroup for its new plant in Qidong, Jiangsu Province, China. The lines will be shipped to Huafon this year.

All these lines consist of DiloTemafa high capacity blending systems, DiloSpinnbau special card feeding systems and high capacity carding machines, DiloMachines high speed crosslappers with special air-guide system for the best layering performance, as well as numerous DiloMachines needlelooms with Hyperpunch technology. The Twinflow-system provides a homogeneous flock mat while “Webguide” and 3-apron-layering system result in an excellent web quality with precise web edges. All lines are equipped with CV1 system for the best end product uniformity.

Huafon Microfiber Co. Ltd was established in 2002 and is now one of the biggest producers of artificial leather made from sea-island fibre worldwide. The main applications of these high quality artificial leathers are shoe, automotive, glove, bag, sofa etc.

DiloGroup supplied the first complete needling line to Huafon in Jinshan, China, in 2003 and up to now Huafon has ordered more than twenty needling lines.