From the Sector

Reset
71 results
(c) Oerlikon
The new Staple Fiber Technology Center in Neumünster
13.05.2022

Oerlikon Polymer Processing Solutions at Techtextil 2022

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
Airbags have become an integral part of our everyday automotive lives. The yarns used in them are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technologies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants. And all this without any loss of function in any climate and anywhere in the world for the lifetime of the vehicle.

Buckle up!
Seat belts play a decisive role in protecting vehicle occupants. They have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments.

Invisible, but essential – road reinforcement using geotextiles
But it not just inside vehicles, but also under them, that industrial yarns reveal their strengths. Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demanding tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC – technological quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

New high-tech Staple Fiber Technology Center
Extending to around 2,100 m2, Oerlikon Neumag in Neumünster is home to one of the world’s largest staple fiber technology centers. As of now, these state-of-the-art staple fiber technologies are also available for customer-specific trials.

The focus during the planning and the design of the Technology Center was on optimizing components and processes. Here, special attention was paid to ensuring the process and production parameters in the Technology Center system could be simply and reliably transferred to production systems. Here, the fiber tape processing line is modular in design. All components can be combined with each other as required. And comprehensive set-up options supply detailed findings for the respective process for various fiber products.

The Technology Center is also equipped with two spinning positions for mono- and bi-component processes. The same round spin packs are used for both processes, characterized by excellent fiber quality and properties and meanwhile very successfully deployed in all Oerlikon Neumag production systems. Furthermore, the spinning plant is complemented by automation solutions such as spin pack scraper robots, for example.

More information:
Oerlikon Neumag Techtextil
Source:

Oerlikon

Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term. (c) Lectra
Hélène Viot Poirier
04.05.2022

Ross McInnes and Hélène Viot Poirier join Lectra’s Board of Directors

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 
Daniel Harari, Chairman and Chief Executive Officer of Lectra, says: “We are delighted to welcome Ross McInnes and Hélène Viot Poirier to Lectra’s Board of Directors. Through Ross McInnes’ appointment, we will benefit from his extensive experience as a director of listed companies and his knowledge of Lectra’s challenges, as well as his expertise in strategy, management, finance, and governance. Hélène Viot Poirier has extensive knowledge of the digital world and the fashion market. Her appointment will enable the Board of Directors to benefit from her expertise in acquisition strategy, management and the development of environmentally responsible products”.
 
In the last five years, Ross McInnes has been a member of Lectra’s Board of Directors, and a member of the Audit Committee, the Compensation Committee and the Strategic Committee. This first mandate came to an end in April 2020. Ross McInnes is a graduate of the University of Oxford.
 
Since 2020, as an Independent Senior Advisor, she has supported strategic internal and external growth projects in the fashion, digital and consumer goods sectors. Hélène Viot Poirier is a graduate of HEC Paris.

28.04.2022

Lectra published its financial report for Q1 2022

  • Revenues: 122.0 million euros (+83%)
  • EBITDA before non-recurring items: 21.6 million euros (+90%)
  • Net income: 9.3 million euros (+55%)
  • Free cash flow before non-recurring items: 7.1 million euros

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the unaudited consolidated financial statements for the first quarter of 2022.
To facilitate analysis of the Group’s results, the financial statements are compared to those published in 2021 and to the Q1 2021 pro forma figures ("2021 Pro forma"), prepared by integrating the three acquisitions made in 2021 – Gerber Technology (“Gerber”), Neteven, and Gemini CAD Systems (“Gemini”) – as if they had been consolidated from January 1, 2021, whereas they have been consolidated since June 1, July 28 and September 27, 2021 respectively.

See the attached document for more details about the financial statements.

  • Revenues: 122.0 million euros (+83%)
  • EBITDA before non-recurring items: 21.6 million euros (+90%)
  • Net income: 9.3 million euros (+55%)
  • Free cash flow before non-recurring items: 7.1 million euros

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the unaudited consolidated financial statements for the first quarter of 2022.
To facilitate analysis of the Group’s results, the financial statements are compared to those published in 2021 and to the Q1 2021 pro forma figures ("2021 Pro forma"), prepared by integrating the three acquisitions made in 2021 – Gerber Technology (“Gerber”), Neteven, and Gemini CAD Systems (“Gemini”) – as if they had been consolidated from January 1, 2021, whereas they have been consolidated since June 1, July 28 and September 27, 2021 respectively.

See the attached document for more details about the financial statements.

Photo: JEC Group
26.04.2022

The Winners of the 2022 JEC Composites Innovation Awards

Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composites industry. The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

The ceremony took place on April 26th in Paris. Highlighted by the presence of jury members, finalists and winners but most importantly, as it was livestreamed, the gathering of many people all around the world to watch the awaited results.

The enthusiasm for the Innovation Awards, exactly 7 days prior to JEC World, is a good sign of the industry’s eagerness to get back together and ensure the future of composites innovation.

Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composites industry. The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

The ceremony took place on April 26th in Paris. Highlighted by the presence of jury members, finalists and winners but most importantly, as it was livestreamed, the gathering of many people all around the world to watch the awaited results.

The enthusiasm for the Innovation Awards, exactly 7 days prior to JEC World, is a good sign of the industry’s eagerness to get back together and ensure the future of composites innovation.

  • Aerospace Application
    Diab (Sweden): 100% thermoplastic panel for cabin interiors
  • Aerospace – Process
    MTorres Disenos Industriales S.A.U. (Spain): Innovative Infusion Airframe Manufacturing System
  • Automotive & road transportation – Structural
    Jaguar Land Rover Limited (UK): TUCANA
  • Automotive & road transportation – Surfaces
    AUDI AG (Germany): Seamless Integration of Flexible Solar Film in FRP
  • Building & Civil Engineering
    Windesheim (Netherlands): Structural Re-Use of Thermoset Composites
  • Design, Furniture and Home
    Kairos (France): Kairlin®, a new recyclable & compostable material
  • Equipment and Machinery
    Fibraworks GmbH (Germany): Winding the future – fibraforce technology
  • Maritime Transportation & Shipbuilding
    Voith Composites SE & Co. KG (Germany): Marine Rotor Blades made of Voith ‘Carbon4Stack’
  • Renewable Energy
    Siemens Gamesa Renewable Energy (Denmark): RecyclableBlade
  • Sports, Leisure & Recreation
    Bcomp Ltd. (Switzerland): Eco-joint from thermoset race and thermoplast road
Source:

JEC Group

(c) Cobra International
26.04.2022

COBRA International: Highlights Diversification into New Market Sectors at JEC World 2022

Cobra International, a leading manufacturer of advanced composite products for the watersports, automotive, marine, and industrial sectors, will highlight recent diversification into new composite markets at JEC World 2022, with exhibits ranging from VTOL drones to carbon fibre prosthetics.  Cobra will also demonstrate how it is working alongside automotive and water sports customers to further enhance the sustainability of products in these sectors.

High Volume Production Capacity for the UAV sector
Cobra will display a wing from the Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for survey, monitoring and search and rescue operations. Cobra manufactured the 32kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.  

Cobra International, a leading manufacturer of advanced composite products for the watersports, automotive, marine, and industrial sectors, will highlight recent diversification into new composite markets at JEC World 2022, with exhibits ranging from VTOL drones to carbon fibre prosthetics.  Cobra will also demonstrate how it is working alongside automotive and water sports customers to further enhance the sustainability of products in these sectors.

High Volume Production Capacity for the UAV sector
Cobra will display a wing from the Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for survey, monitoring and search and rescue operations. Cobra manufactured the 32kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.  

Sustainability Options for Automotive and Watersports
Sustainability has a been a key focus for the Cobra Waterports division and CAC, the Cobra automotive business unit. At JEC World 2022, Cobra will showcase the increasing material and process options it has developed with both bio-resin and natural fibre reinforcements variants presented alongside more traditional carbon fibre parts.

Visitors will be able to get up close to a new Bio SUP Wingfoil board featuring a basalt, flax, bamboo and GreenPoxy bio-epoxy construction created for partners NSP, as well as state-of-the-art compression moulded prepreg foils. Cobra’s first fully recyclable surfboard incorporating the Recyclamine® resin technology that Cobra was recognised for in the 2020 JEC Innovation Awards will also be on display alongside a new Audi e-tron foil by Aerofoils – the world’s safest electric hydrofoil board.

The CAC team (Automotive Business Unit of Cobra) will present a set of OEM mirror cap parts that showcase a range of carbon SMC, woven visual carbon, pure woven visual flax, hybrid flax-carbon and painted flax construction options for the same component.  Clear carbon aesthetic and structural parts including CAC made M-carbon components for the BMW S 1000 RR Motorcycle will furthermore underline the high quality and eye-for-detail for which CAC is renowned.

Carbon Prosthetics
An entirely new composite application for the company, Cobra will also show two composite prosthetic devices at JEC which were productionised by the in-house design and development team. Working alongside a leading Thai university and a medical device OEM, Cobra created a rapid and cost effective series production process for a lightweight carbon fibre prosthetic foot. In another example of lightweight composites creating major quality of life improvements, Cobra has also designed and manufactured a carbon and glass fibre prepreg foot support for Elysium Industries.

More information:
COBRA Composites UAV
Source:

Cobra International

06.04.2022

Lenzing presents Online Sustainability Report 2021

  • Lenzing continues to march purposefully towards Group-wide climate neutrality
  • Lenzing recognized as “sustainability champion” several times worldwide – one of only 14 companies awarded “AAA” rating by CDP
  • New, innovative reporting methods – Lenzing presents its Online Sustainability Report for the first time
  • Sustainability Report 2021 based on the results of the updated materiality analysis

Lenzing – The Lenzing Group, the world’s leading supplier of wood-based specialty fibers, released its Sustainability Report 2021 today, April 05, 2022, on the occasion of “Earth Month”. Bearing the title “Linear to Circular”, the report emphasizes the company’s focus on carefully balancing its needs with those of nature in the spirit of the circular economy. The report has been prepared in accordance with the standards of the Global Reporting Initiative (GRI) and the Austrian Sustainability and Diversity Improvement Act (NaDiVeG) and audited by KPMG Austria GmbH Wirtschaftsprüfungs- und Steuerberatungsgesellschaft.

  • Lenzing continues to march purposefully towards Group-wide climate neutrality
  • Lenzing recognized as “sustainability champion” several times worldwide – one of only 14 companies awarded “AAA” rating by CDP
  • New, innovative reporting methods – Lenzing presents its Online Sustainability Report for the first time
  • Sustainability Report 2021 based on the results of the updated materiality analysis

Lenzing – The Lenzing Group, the world’s leading supplier of wood-based specialty fibers, released its Sustainability Report 2021 today, April 05, 2022, on the occasion of “Earth Month”. Bearing the title “Linear to Circular”, the report emphasizes the company’s focus on carefully balancing its needs with those of nature in the spirit of the circular economy. The report has been prepared in accordance with the standards of the Global Reporting Initiative (GRI) and the Austrian Sustainability and Diversity Improvement Act (NaDiVeG) and audited by KPMG Austria GmbH Wirtschaftsprüfungs- und Steuerberatungsgesellschaft.

The Lenzing Sustainability Report 2021 is available on the company website.

More information:
Lenzing AG Sustainability
Source:

Lenzing Aktiengesellschaft

29.03.2022

Esprit Announces Annual Results for FY2021

  • Revenue Increases to HK$8,316 Million with Net Profit After Tax Surging Significantly
  • Recording a Turnaround to HK$381 Million
  • Re-Establishes ESPRIT’s Market Leadership

ESPRIT HOLDINGS LIMITED has announced its audited financial annual results for the year ended 31 December 2021, highlighted by a significant increase in both revenue and profit attributable to shareholders of the Company to HK$8,316 million and HK$381 million respectively, in which the profit attributable to shareholders of the Company also recorded a turnaround versus the loss attributable to shareholders of the Company of HK$414 million for the six months ended 31 December 2020. Gross profit margin was 48.6%, 7.0% higher than the Corresponding Period. Please refer to the Company’s results announcement for the Current Year for further details.

  • Revenue Increases to HK$8,316 Million with Net Profit After Tax Surging Significantly
  • Recording a Turnaround to HK$381 Million
  • Re-Establishes ESPRIT’s Market Leadership

ESPRIT HOLDINGS LIMITED has announced its audited financial annual results for the year ended 31 December 2021, highlighted by a significant increase in both revenue and profit attributable to shareholders of the Company to HK$8,316 million and HK$381 million respectively, in which the profit attributable to shareholders of the Company also recorded a turnaround versus the loss attributable to shareholders of the Company of HK$414 million for the six months ended 31 December 2020. Gross profit margin was 48.6%, 7.0% higher than the Corresponding Period. Please refer to the Company’s results announcement for the Current Year for further details.

Such financial improvement was attributable to various reasons, including (i) the new infrastructure and strategies instituted by the current management team; (ii) improvement in sales with higher gross profit margin; (iii) positive results of efficient cost control measures; (iv) improved inventory management; and (v) growth in E-commerce.

Although revenue in the Current Year was affected by lockdowns in the Company’s major European markets during the first quarter of 2021, and due to increased restrictions on entry requirements into stores during the fourth quarter of 2021, the Group generated revenue via three main channels: E-commerce, wholesale, and owned retail stores. As the ESPRIT brand website and third-party E-commerce partners continued to trade during lockdown, a large portion of the Group’s sales were generated online. This business model allowed it to mitigate some of the negative impacts of the Pandemic in the retail segment. Another driver of growth came from selling fewer discounted products from the Company’s retail business compared to 2020.

The Group has not forgotten the ESPRIT mission and long-standing commitment to sustainability. The Company has continued to work tirelessly towards developing cutting-edge materials that set new standards in terms of environmental sustainability. The Company has formulated and further advanced its ESG strategies to establish ESPRIT as an industry pioneer. Such strategies involve the greater use of sustainable fibers, developing new and innovative product options that support a circular economy, and ensuring environmental awareness is a key message that underpins all of the Group’s projects. To achieve these objectives, the Management has identified four key pillars of growth (Sourcing and Procurement; Marketing and Product; IT, Internet, and E-commerce; and The ESPRIT Brand Story) that are paramount in maintaining the loyalty of existing ESPRIT patrons and attracting new customers.

Looking ahead, the global economy is anticipated to be negatively affected by the lingering effects of the coronavirus pandemic and the conflict in Ukraine. The already unstable logistics industry and disrupted supply chain will likely be further impacted, which in turn will result in higher logistic service costs. Despite the unfavorable global economic outlook, the Group believes that under the leadership of its current management and with the support of dedicated staff members, the Company is on track to ongoing profit growth.

Source:

FleishmanHillard

21.03.2022

OEKO-TEX® Association turns 30: Trust, Safety, Sustainability

The vision of the OEKO-TEX® Association, which was founded in March 1992 through a partnership between the Hohenstein Research Institute and the Austrian Textile Research Institute (OETI), is still reflected today in the organization's core values: trust, safety, and sustainability. For three decades, OEKO-TEX® has pursued the goal of building trust for companies and consumers and enabling them to make responsible decisions to protect people and the planet. "Our services bring transparency to the international textile and leather industry supply chains," says OEKO-TEX® Secretary General Georg Dieners. "They enable all stakeholders to make mindful decisions that help preserve our planet for future generations."

The vision of the OEKO-TEX® Association, which was founded in March 1992 through a partnership between the Hohenstein Research Institute and the Austrian Textile Research Institute (OETI), is still reflected today in the organization's core values: trust, safety, and sustainability. For three decades, OEKO-TEX® has pursued the goal of building trust for companies and consumers and enabling them to make responsible decisions to protect people and the planet. "Our services bring transparency to the international textile and leather industry supply chains," says OEKO-TEX® Secretary General Georg Dieners. "They enable all stakeholders to make mindful decisions that help preserve our planet for future generations."

OEKO-TEX® market leadership
In 1992, 20 years before the United Nations announced the Sustainable Development Goals (SDGs), OEKO-TEX® launched STANDARD 100 by OEKO-TEX®, now one of the best-known labels for product safety.
"It emerged from the Schadstoffgeprüft nach ÖTN 100(tested for harmful substances according to ÖTN 100), developed by OETI in 1989 to address increasing public interest in textile ecology and health," the Austrian Textile Research Institute reminds us. The limit values and test methods on which STANDARD 100 by OEKO-TEX® is based were internationally standardized and are adapted to the latest scientific findings and legislation at least once a year - a principle that is applied to all OEKO-TEX® standards. Prof. Dr. Stefan Mecheels, the owner of the textile testing service provider Hohenstein, adds: "From the very beginning, we have considered the needs of all players in the textile value chain and continue to create solutions for current and future market requirements."

At least seven SDGs are firmly integrated into the OEKO-TEX® product portfolio. For example, Good Health & Well-Being (SDG 3) and Clean Water & Sanitation (SDG 6) are reflected in the STeP by OEKO-TEX® factory certification, and Responsible Consumption & Production (SDG 12) and Climate Action (SDG 13) are implemented through the comprehensive MADE IN GREEN by OEKO-TEX® product label.

Today, the international association consists of 17 independent research and testing institutes focused on textile and leather, with contact offices in over 60 countries. They are responsible for the joint development of the test methods and limit values in the OEKO-TEX® Standards and carry out laboratory tests and factory audits according to globally uniform specifications. These comprehensive product and process audits to ensure appropriate risk management, consumer and environmental protection, and legal compliance. With their wide-ranging research and development, the accredited OEKO-TEX® test institutes provide important insight for innovations within the textile and leather industry. They work in close cooperation with manufacturers and make a significant contribution to the development of high-quality textile and leather products at all stages of the value chain.

Mirror of social and political development
Being close to the market, and ideally, one step ahead is essential to supporting companies who are adapting to constantly changing conditions and meeting consumer expectations. Therefore, the development of OEKO-TEX® is not only a reflection of scientific knowledge but also of social and political trends. The focus is always on standardizing sustainable action and measures and making it easier for the industry to quickly and comprehensively implement sustainability goals.

Exchange with third parties is particularly valuable for this purpose. OEKO-TEX® participates in various international multi-stakeholder initiatives such as the Organization for Economic Co-operation and Development (OECD), the Partnership for Sustainable Textiles, the ZHDC (Zero Discharge of Hazardous Chemicals), and Greenpeace.
In addition to cooperation with external multi-stakeholder initiatives, the OEKO-TEX® International Advisory Board (IAB) meets annually. The core function of the IAB is to help review consistent and market-oriented Standards development proposals by the OEKO-TEX® Working Groups. In addition, OEKO-TEX® is conducting a public stakeholder consultation to gain further insights from all interest groups, which it will integrate into further development of the Standards.
Using three decades of experience for the future
The founding goal of enabling responsible choices that preserve our planet for future generations has become increasingly urgent over the past 30 years. So, OEKO-TEX® is even more resolute than ever in developing comprehensive solutions. We stand by industry and consumers as a trusted partner for the challenges ahead. In addition to the IMPACT CALCULATOR launched in January 2022, which helps STeP by OEKO-TEX® certified production facilities reduce their carbon emissions and water consumption, this summer, the association will launch a service to help companies transition to the upcoming Due Diligence Laws.

Source:

Oeko-Tex

(c) OETI
16.03.2022

OETI: Opening of sales offices in India and Bangladesh

OETI - Institute for Ecology, Technology and Innovation’ offers as a worldwide accredited and notified centre of excellence testing and certification services. The company specialises in textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality.  As a founding member of the OEKO-TEX® community (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

OETI - Institute for Ecology, Technology and Innovation’ offers as a worldwide accredited and notified centre of excellence testing and certification services. The company specialises in textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality.  As a founding member of the OEKO-TEX® community (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company TESTEX AG, OETI’s network of locations spans several continents. Recently, two more branches have been added in India and Bangladesh: Headquartered in Coimbatore/Tamil Nadu, OETI India is managed by Vignesh Amalraj, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management. The second location was recently opened in Dhaka, Bangladesh. The responsible Country Manager, Mohiuddin Sheek, is an expert in the areas of testing, auditing, certification, product safety, training, consulting and business development.

More information:
OETI
Source:

OETI

(c) JEC Group
15.03.2022

The JEC Composites Startup Booster celebrates its 5th anniversary

The JEC Composites Startup Booster rewards innovations with a great potential market impact and promote them to an influential audience of decision-makers. In 5 years, it became a reference for entrepreneurship in the composites industry worldwide, shining a light, each year, on 20 finalists from all over the world, giving them the opportunity to pitch their project on JEC World’ stage before a panel of expert judges.

The competition has been organized in three different regions (Europe, USA and Asia) and has already fostered the emergence of 600+ innovative projects from 50+ countries, 80 finalists and 30 winners, including Arevo, Continuous Composites, ComPair, Fortify and Vartega.

Five former winners or finalists share their experience in a series of interviews available on JEC Web TV.

The JEC Composites Startup Booster rewards innovations with a great potential market impact and promote them to an influential audience of decision-makers. In 5 years, it became a reference for entrepreneurship in the composites industry worldwide, shining a light, each year, on 20 finalists from all over the world, giving them the opportunity to pitch their project on JEC World’ stage before a panel of expert judges.

The competition has been organized in three different regions (Europe, USA and Asia) and has already fostered the emergence of 600+ innovative projects from 50+ countries, 80 finalists and 30 winners, including Arevo, Continuous Composites, ComPair, Fortify and Vartega.

Five former winners or finalists share their experience in a series of interviews available on JEC Web TV.

Source:

JEC Group

Six Carbon Capture and Utilisation technologies for a sustainable chemical and fuel production nominated for the innovation award “Best CO2 Utilisation 2022”
CCU-2022 Award-Nominees
14.03.2022

“Best CO2 Utilisation 2022” Award Nominees

  • Six Carbon Capture and Utilisation technologies for a sustainable chemical and fuel production nominated for the innovation award “Best CO2 Utilisation 2022”
  • Conference on CO2-based Fuels and Chemicals 2022 – Cologne (Germany) and online, hybrid conference, 23-24 March 2022

Carbon Capture and Utilisation (CCU) Innovations of the Year 2022: A lot of technologies are in place and in development to face the challenges of a sustainable chemicals and fuels production based on the utilisation of captured CO2 from industrial off-gases or directly from the atmosphere. To honor these, nova-Institute grants its annual award, “Best CO2 Utilisation”, within the framework of the “Conference on CO2-based Fuels and Chemicals” taking place in Cologne on 23-24 March 2022. Great submissions reached the nova-Institute and six nominees now get the chance to demonstrate their full potential to a wide audience in Cologne (Germany) and online.

Here are the six nominees:

  • Six Carbon Capture and Utilisation technologies for a sustainable chemical and fuel production nominated for the innovation award “Best CO2 Utilisation 2022”
  • Conference on CO2-based Fuels and Chemicals 2022 – Cologne (Germany) and online, hybrid conference, 23-24 March 2022

Carbon Capture and Utilisation (CCU) Innovations of the Year 2022: A lot of technologies are in place and in development to face the challenges of a sustainable chemicals and fuels production based on the utilisation of captured CO2 from industrial off-gases or directly from the atmosphere. To honor these, nova-Institute grants its annual award, “Best CO2 Utilisation”, within the framework of the “Conference on CO2-based Fuels and Chemicals” taking place in Cologne on 23-24 March 2022. Great submissions reached the nova-Institute and six nominees now get the chance to demonstrate their full potential to a wide audience in Cologne (Germany) and online.

Here are the six nominees:

  • Acies Bio (SI) – OneCarbonBio
  • Air Company (US) – Air Eau de Parfum
  • Avecom (BE) – Power To Protein
  • CleanO2 Carbon Capture Technologies (CA) – CleanO2 Soap
  • Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB (DE) – eBioCO2n Technology
  • Nordic Electrofuel (NO) – E-Fuel 1
23.02.2022

GOTS marks 20th anniversary with all-time high in certified facilities

  • Record high: 12,338 (+19%) GOTS certified facilities in 79 countries in 2021  

Twenty years after its inception, the textile processing standard for organic fibres records new all-time high figures: 18 GOTS Approved Certification Bodies report a total of 12,338 certified facilities (+19%) in 79 countries (+11%).  

Among the countries with the largest increase in GOTS certified facilities in 2021 are Turkey (+61% to 1.799), Italy (+53% to 894), Germany (+19% to 817), Portugal (+35% to 608), France (+22% to 122), Denmark (+14% to 115), Switzerland (+15% to 61), Belgium (+55% to 59), Sweden (+34% to 51) and Vietnam (+264% to 51).

  • Record high: 12,338 (+19%) GOTS certified facilities in 79 countries in 2021  

Twenty years after its inception, the textile processing standard for organic fibres records new all-time high figures: 18 GOTS Approved Certification Bodies report a total of 12,338 certified facilities (+19%) in 79 countries (+11%).  

Among the countries with the largest increase in GOTS certified facilities in 2021 are Turkey (+61% to 1.799), Italy (+53% to 894), Germany (+19% to 817), Portugal (+35% to 608), France (+22% to 122), Denmark (+14% to 115), Switzerland (+15% to 61), Belgium (+55% to 59), Sweden (+34% to 51) and Vietnam (+264% to 51).

“What seemed utopian to many in 2002 has become a reality in the past 20 years. We have created an organic textile standard, certified by approved certification bodies, which is accepted in all major markets. GOTS is a standard that gives consumers the power to choose truly organic products sourced from sustainable supply chains.” says Claudia Kersten, Managing Director at GOTS. “Despite ongoing difficulties and uncertainty caused by the Covid-19 pandemic, decision-makers continue to pursue their sustainability goals and value GOTS as a tool to accomplish them”.

The results of the annual GOTS Survey among certified entities underline this. Out of 1.114 respondents (+39%), 63% indicated a permanent shift in their sustainability strategy with a focus on the environment and health of their workers and staff.

Growing interest from industry, the public, and the media drove website visits up an impressive 48%. Media exposure grew by 64% and GOTS social media followers across several platforms jumped by 57%.
“As much as we are pleased with the development so far, we don’t intend to rest on our laurels” adds Rahul Bhajekar, Managing Director at GOTS. “In March 2022 we begin revision for GOTS version 7.0 involving all stakeholders including associations, organisations, companies, and individuals to further advance the progressive, innovative, stringent yet practical standard of GOTS”.

More information:
GOTS
Source:

GOTS

21.02.2022

JEC COMPOSITES STARTUP BOOSTER 2022

  • A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

  • A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

Launched in 2017, Startup Booster has been organized in three different regions (Europe, USA and Asia) and has already fostered the emergence of 500+ innovative projects from 50+ countries, 80 finalists and 30 winners, including Arevo, Continuous Composites, ComPair, Fortify and Vartega…
This challenge not only represents an opportunity to the winners of the trophy but to all the parts involved: participants, jury, official partners and the worldwide audience of JEC World. It brings the entire composites value chain together, creating future business opportunities.

The 20 finalists are divided into two categories:
• Process, Manufacturing & Equipment
• Materials & Products

The jury includes representatives from major manufacturers and investors:
Jelle BLOEMHOF, Head of Manufacturing Technologies of Composite, Airbus
Karl-Heinz FULLER, Head of Future Outside & Materials Mercedes-Benz AG
Florent ILLAT, Head of Safran Corporate Ventures, Safran
Brian KRULL, Global Director of Innovation, Magna Exteriors
Tim VORAGE, Founder and Manager Growth Garage Accelerator , Mitsubishi Chemicals Advanced Materials

Two pitch sessions of 10 presentations each will be held in the Agora stage (Hall 5), on Tuesday, May 3, from 10am to 11.25am (Category: Products & Materials) and from 4.30pm to 5.55pm (Category: Process, Manufacturing & Equipment). Three winners will be chosen by the jury and one winner for the sustainable aspects of the project. The awards ceremony will be held on Wednesday, May, 4th at 2.45 pm.

Category “Products & Materials”
o Blackleaf (France)
o Dongnam Realize (South Korea)
o FibreCoat (Germany)
o FVMat (Israel)
o Ora Graphene Audio (Canada)
o Pangolin Defense (France)
o Phononic Vibes (Italy)
o Revolve (Germany)
o Smart Resilin (Israel)
o Space Walker (Japan)

Category “Process, Manufacturing & Equipment”
o Antefil Composite Tech (Switzerland)
o ANYBRID (Germany)
o Atomic-6 (USA)
o Carbon-Drive (Germany)
o Continuum (Denmark)
o Fibraworks (Germany)
o Herone (Germany)
o RVmagnetics (Slovakia)
o Touch Sensity (France)
o XARION Laser Acoustics (Austria)

More information:
JEC Group Startup
Source:

JEC Group

24.01.2022

Sateri completes Higg Facility Social and Labour Module Assessment

All of Sateri’s five viscose mills in China have undergone independent evaluation of their social and labour practices, having completed the Higg Facility Social and Labour Module (FSLM) audit and achieved a consistent high score of above 80%.

A member of the RGE group of companies, Sateri is also one of the world’s first viscose producers to have completed the Higg Facility Environmental Module (FEM) assessment, with the similar verified high score of over 80% for all its viscose mills.

Developed by the Sustainable Apparel Coalition, a global, multi-stakeholder non-profit alliance for the fashion industry, the Higg Index is a suite of tools that enables brands, retailers and facilities of all sizes to accurately measure and score a company or product’s sustainability performance.

The FSLM tool of the Higg Index holistically assesses working conditions of the mills, including fair wages and compensation, health & safety, respectful treatment of employees etc; while the FEM tool focuses more on environmental performance, including energy consumption, greenhouse gas missions, water use, chemical and waste management.

All of Sateri’s five viscose mills in China have undergone independent evaluation of their social and labour practices, having completed the Higg Facility Social and Labour Module (FSLM) audit and achieved a consistent high score of above 80%.

A member of the RGE group of companies, Sateri is also one of the world’s first viscose producers to have completed the Higg Facility Environmental Module (FEM) assessment, with the similar verified high score of over 80% for all its viscose mills.

Developed by the Sustainable Apparel Coalition, a global, multi-stakeholder non-profit alliance for the fashion industry, the Higg Index is a suite of tools that enables brands, retailers and facilities of all sizes to accurately measure and score a company or product’s sustainability performance.

The FSLM tool of the Higg Index holistically assesses working conditions of the mills, including fair wages and compensation, health & safety, respectful treatment of employees etc; while the FEM tool focuses more on environmental performance, including energy consumption, greenhouse gas missions, water use, chemical and waste management.

Source:

Sateri

(c) CAPAROL ICONS
20.01.2022

CAPAROL ICONS: Designer Sebastian Herkner mit Farbkonzept für Kunst-Galerien

Am ruhigen Ufer des Feenteichs in Hamburg gelegen befindet sich in einer prachtvollen Jugendstilvilla mit einem idyllischen Skulpturen-Garten die Galerie „Wentrup am Feenteich“. Dabei handelt es sich nicht nur um einen Ort, an dem Sammler zeitgenössische Kunst auf höchstem Niveau erleben können. Vor allem ist es auch ein Ort, der eine Begegnung zwischen der bildenden Kunst und anderen kreativen, kulturellen und akademischen Bereichen ermöglicht.

Der international renommierte Gestalter Sebastian Herkner entwarf das luxuriöse Interieur inklusive Wandgestaltung als ein ganzheitliches Konzept, in dem die Kunstwerke trotz – oder gerade wegen – der kontemporären Innenraumgestaltung im Fokus stehen. Das für die Kunstwelt ungewöhnliche Konzept verzichtet auf den üblichen Galerie-Look in Weiß.

Am ruhigen Ufer des Feenteichs in Hamburg gelegen befindet sich in einer prachtvollen Jugendstilvilla mit einem idyllischen Skulpturen-Garten die Galerie „Wentrup am Feenteich“. Dabei handelt es sich nicht nur um einen Ort, an dem Sammler zeitgenössische Kunst auf höchstem Niveau erleben können. Vor allem ist es auch ein Ort, der eine Begegnung zwischen der bildenden Kunst und anderen kreativen, kulturellen und akademischen Bereichen ermöglicht.

Der international renommierte Gestalter Sebastian Herkner entwarf das luxuriöse Interieur inklusive Wandgestaltung als ein ganzheitliches Konzept, in dem die Kunstwerke trotz – oder gerade wegen – der kontemporären Innenraumgestaltung im Fokus stehen. Das für die Kunstwelt ungewöhnliche Konzept verzichtet auf den üblichen Galerie-Look in Weiß.

In einem zentralen offenen Raum im Erdgeschoss der Villa, umgeben von Kunst- werken, kreiert der helle Bambus-Ton NO 87 LOUNGE MIX eine ruhige, elegante Atmosphäre und lädt die Besucher:innen zum Verweilen ein. Angelehnt an die Chill-Out-Lounges der ekstatischen Partykultur der 90er Jahre ist diese Ikone wohltuend selbstverständlich anwesend, ohne direkt als Farbton wahrnehmbar zu sein. Deshalb ist NO 87 sehr kompatibel mit allen Einrichtungsstilen.

Im Eingangsbereich und Treppenhaus empfängt die Besucherinnen und Besucher NO 62 STONEWASHED. Das feine, verwaschene Graublau mit einer Spur von Petrol ist von den legendären stonewashed Jeans der 80er Jahre inspiriert und für alle diejenigen konzipiert, die sowohl Blau, Grau als auch leicht grünliche Farben lieben. Dieser Ton hat viele Nuancen, was ihn für alle Räume im Haus einsetzbar macht

More information:
CAPAROL ICONS interior
Source:

CAPAROL ICONS / Claudia Neumann Communication GmbH

18.01.2022

Indorama Ventures’ Hygiene Division achieves ISCC Plus Certification

The Hygiene Division of Indorama Ventures Public Company Limited (IVL) is pleased to announce that two of its manufacturing sites have achieved International Sustainability Carbon Certification Plus Certification.

FiberVisions’ Varde site in Denmark, a polypropylene fiber producer, and Avgol’s Uzlovaya site in Russia, a spunlaid nonwovens producer, satisfied audits related to traceability and the reasonable use of biomaterials.

Shachar Rachim, CEO, IVL Hygiene Division, part of IVL’s Fibers business segment, said: “This accreditation underscores our commitment to support our customers to achieve their carbon dioxide reduction targets through using carbon neutral fibers. The certification is assurance that our nonwoven fabrics and fibers meet all the ISCC’s demanding standards for recycled-renewable materials. Our certified facilities can trace the product’s composition through the supply chain, without needing to requalify the materials.”

The Hygiene Division of Indorama Ventures Public Company Limited (IVL) is pleased to announce that two of its manufacturing sites have achieved International Sustainability Carbon Certification Plus Certification.

FiberVisions’ Varde site in Denmark, a polypropylene fiber producer, and Avgol’s Uzlovaya site in Russia, a spunlaid nonwovens producer, satisfied audits related to traceability and the reasonable use of biomaterials.

Shachar Rachim, CEO, IVL Hygiene Division, part of IVL’s Fibers business segment, said: “This accreditation underscores our commitment to support our customers to achieve their carbon dioxide reduction targets through using carbon neutral fibers. The certification is assurance that our nonwoven fabrics and fibers meet all the ISCC’s demanding standards for recycled-renewable materials. Our certified facilities can trace the product’s composition through the supply chain, without needing to requalify the materials.”

IVL expects that the ISCC Plus certification of these two sites will be followed by similar certifications at other manufacturing plants. A broad portfolio of technologies is being developed to address how component materials interact with the environment to improve recyclability, reduce raw material consumption, and minimize the impact of fugitive wastes.

Source:

Indorama Ventures Public Company Limited

JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking © 2021 JEC Group
JEC World 2022
08.12.2021

JEC World 2022: 3 months to go

  • JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking

JEC World, the leading global trade show dedicated to composite materials, their manufacturing technologies and application markets, will take place in Paris from March 8-10, 2022, under the theme Composites for a Sustainable World. JEC World 2022 will be the industry’s most awaited international face to face event after the long pandemic period. Exhibition space is already 98% booked, a clear demonstration of the industry’s commitment to meet and resume business. Those unable to join in person will be able to experience the show via the JEC World Connect digital platform.

  • JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking

JEC World, the leading global trade show dedicated to composite materials, their manufacturing technologies and application markets, will take place in Paris from March 8-10, 2022, under the theme Composites for a Sustainable World. JEC World 2022 will be the industry’s most awaited international face to face event after the long pandemic period. Exhibition space is already 98% booked, a clear demonstration of the industry’s commitment to meet and resume business. Those unable to join in person will be able to experience the show via the JEC World Connect digital platform.

“We are looking forward to welcoming our exhibitors, partners and visitors back to Paris to resume business and promote innovation,” comments Thomas Lepretre, VP Events, Sales and Operations of JEC Group. “JEC World will bring the composites industry together to showcase the sustainability benefits of composite materials to a global audience, and to provide a stimulating meeting-place for the industry to pursue its sustainability ambitions by exchanging knowledge, forging collaborations, and imagining new concepts to protect our environment.”

  • JEC World a unique get-together on sustainability throughout the product lifecycle
  • JEC World a real composites “think tank”
  • JEC World 2022 will demonstrate how sustainable thinking is at the heart of the innovative designs, technologies and business models driving the development of the next generation of composites applications.

Four conferences will be held over the three days, focusing on:

• Sustainability of Raw Materials for Composites: Fueling the Circular Revolution
• Rethinking Composite Materials Production: The Path to Sustainable Manufacturing
• Design for Circular Composite Products: Turning Waste, Recycling & Reuse into Opportunities
• Applications of Composite Materials for Circularity: Towards a Net-Zero World

Innovation is in JEC World’s DNA
One of JEC World’s objective’s is to promote the composites sector’s most innovative projects. More than 600 product launches are expected to be announced over the three days of the show, which will also feature JEC’s high-regarded innovation challenges and awards ceremonies :

• The JEC Composites Innovation Awards celebrate innovative global composite projects, as well as fruitful collaborations between different players in the value chain. Over more than 15 years, the JEC Composites Innovation Awards have highlighted collaborations between some 1,900 companies and recognized 203 creative projects. The winners will be announced on March 7th during a dedicated ceremony and their successful technologies will be on display throughout the show.

• The JEC Composites Startup Booster is the leading startup competition in the world of composites. In 2022, this competition will celebrate its fifth anniversary, with a special event to be organized onsite and the launch of a new “sustainability” award. And, with 20 finalists for 2022, it will recognize innovations with the greatest potential market impact and promote them to an influential audience of decision-makers. The finalists’ innovations will be displayed at JEC World’s “Startup Village.”

• For the first time, JEC World will host the 3rd edition of the SMC BMC Design Award organized by the European Alliance for SMC BMC. This international competition recognizes and promotes design excellence in the use of SMC and BMC materials. The theme of this edition is Sustainable Living, and the award is opento design students and young design professionals (less than 3 years of experience) living in Europe.

Source:

JEC Group

AZL schließt gemeinsam mit 46 Industriepartnern Projekt zu Batteriegehäusen erfolgreich ab (c) AZL
06.12.2021

AZL: Gemeinsames Projekt zu Batteriegehäusen mit 46 Industriepartnern

Gemeinsam mit insgesamt 46 Industriepartnern konnten mehrere, verschiedene Konzepte für Kunststoff-basierte Multimaterial-Batteriegehäuse erarbeitet werden, mit denen deutliche Einsparpotentiale bei Gewicht und Kosten möglich sind. Im Projektverlauf kristallisierten sich zwei wichtige Kernthemen heraus, die in Folgeprojekten gesondert behandelt werden sollen: Bodenaufprallschutz und Feuerbeständigkeit. Diese zwei Folgeprojekte starten am 26. Januar 2022. Ein Projekt zur Entwicklung und Realisierung von Prototypen für Mitte nächsten Jahres 2022 ist in Planung.

Gemeinsam mit insgesamt 46 Industriepartnern konnten mehrere, verschiedene Konzepte für Kunststoff-basierte Multimaterial-Batteriegehäuse erarbeitet werden, mit denen deutliche Einsparpotentiale bei Gewicht und Kosten möglich sind. Im Projektverlauf kristallisierten sich zwei wichtige Kernthemen heraus, die in Folgeprojekten gesondert behandelt werden sollen: Bodenaufprallschutz und Feuerbeständigkeit. Diese zwei Folgeprojekte starten am 26. Januar 2022. Ein Projekt zur Entwicklung und Realisierung von Prototypen für Mitte nächsten Jahres 2022 ist in Planung.

Batteriegehäuse gehören zu den Schlüsselkomponenten in E-Fahrzeugen und werden derzeit in der Regel aus Aluminium hergestellt. Genau diese Komponente analysierte das AZL in dem jetzt durchgeführten Projekt mit einem großen Konsortium aus Automobilherstellern, Automobilzulieferern, Rohstoffherstellern und Maschinenherstellern. „Der enorme Zuspruch aus der Industrie unterstreicht die Relevanz des Themas“, freut sich der Projektleiter Warden Schijve, der zudem sehr zufrieden mit dem Verlauf und den Ergebnissen ist. Schließlich lassen sich bis zu 36 % des Gewichts und bis zu 20 % der Kosten einsparen, wenn anstelle herkömmlicher Lösungen Multi-Material-Verbunde auf Basis von Kunststoffen zum Einsatz kommen.

Um zu den Ergebnissen zu gelangen, hat das AZL unter Mitwirkung seiner Partnerunternehmen, zu denen unter anderem Audi, Asahi Kasei, Covestro, DSM, EconCore, Faurecia, Formosa, Hengrui, Hutchinson, IPTE, Johns Manville, Magna, Marelli und Teijin, gehörten, zunächst fünf Subkomponenten eines Batteriegehäuses definiert: die Gehäusewanne, die Bodenschutzplatte, den Crash-Rahmen, die Querbalken und den Gehäusedeckel. Außerdem analysierten die Partner insgesamt 44 marktrelevante, existierende Serienkomponenten und Konzepte genauer und erstellten eine umfangreiche Übersicht über die verschiedenen Standards sowie Anforderungen auf nationaler, internationaler und OEM-Ebene. Prämisse dabei war, gleiche oder gar bessere mechanische Kennwerte zu erreichen als bei herkömmlichen Lösungen. So sollten beispielsweise mindestens gleiche Steifigkeiten, Sicherheiten bei seitlichem Aufprall, EMI-Abschirmung sowie Flammschutz vorhanden sein. Um nun die alternativen Lösungen zu ermitteln, entwickelte das AZL 20 Designkonzepte mit unterschiedlichen Materialkombinationen. Zur Analyse und Auslegung der verschiedenen Konzepte wurden mehr als 500 FEM-Modelle erstellt und über 1.500 CAE-Simulationen durchgeführt.

Während sich Folgeprojekt 1 mit einer anwendungsbezogenen Testmethode und der Untersuchung der Sicherheit verschiedener Materialkombinationen für den Bodenaufprallschutz beschäftigt, steht in Folgeprojekt 2 die Flammresistenz verschiedener Materialien und Materialkombinationen im Vordergrund. Ziel ist es Prüfverfahren zu entwickeln, die es erlauben, die Aufprall-/Feuerbeständigkeit auf Materialebene unter Berücksichtigung der spezifischen Anforderungen an ein Batteriegehäuse im Vergleich zu Standardmaterialien zu untersuchen.

Firmen mit Interesse an Herstellung von Batteriegehäusen können sich an Philipp Fröhlig und Alexander Knauff wenden:
Philipp Fröhlig, AZL Aachen GmbH, Senior Project Manager, Tel: +49 241 47573514, philipp.froehlig@azl-aachen-gmbh.de
Alexander Knauff, AZL Aachen GmbH, Manager Industrial Services, Tel: +49 241 47573516, alexander.knauff@azl-aachen-gmbh.de

 

Source:

AZL Aachen GmbH

12.10.2021

Innovation award “Cellulose Fibre Innovation of the Year 2022”

  • International Conference on Cellulose Fibres 2022, 2-3 February in Cologne, Germany and online
  • Call for Innovations
  • Six nominees will get the chance to present their unique products

The footsteps are big: in 2021, Stora Enso from Sweden won the innovation award, granted on the first day of the “International Conference on Cellulose Fibres”. Their new cellulose foam for packaging fully convinced the audience. Second place was taken by Kelheim Fibres (Germany) with their high-quality hygiene products made of cellulose ahead of third place occupant Metsä Spring from Finland that presented a new cellulose fibre production process.

  • International Conference on Cellulose Fibres 2022, 2-3 February in Cologne, Germany and online
  • Call for Innovations
  • Six nominees will get the chance to present their unique products

The footsteps are big: in 2021, Stora Enso from Sweden won the innovation award, granted on the first day of the “International Conference on Cellulose Fibres”. Their new cellulose foam for packaging fully convinced the audience. Second place was taken by Kelheim Fibres (Germany) with their high-quality hygiene products made of cellulose ahead of third place occupant Metsä Spring from Finland that presented a new cellulose fibre production process.

nova-Institute has opened the Call for Innovations for the “Cellulose Fibre Innovation of the Year 2022” award until 15 November 2021. All producers, inventors and pioneers along the entire value chain from feedstock to final product are invited to enter the competition. Developments of new technologies and applications are welcome. An independent expert jury will select a total of six new materials and products from all entries for the award. The innovators get a free 2-day ticket for the conference and the unique opportunity to present and market their product or technology to a huge professional audience. After short presentations of the six candidates at the conference, the three winners will be elected by the participants of the conference and honored with the innovation award at a festive gala dinner.

Following the conference, nova-Institute issues an international press release to announce the winners.

Call for Innovations
More information about the innovation award and the application can be found at www.cellulose-fibres.eu/award-application
Deadline for submission: 15 November 2021

Source:

nova-Institut GmbH

(c) Autoneum
Claudia Güntert
27.08.2021

Autoneum appoints new Head of Corporate Communications

Claudia Güntert has been appointed Head of Corporate Communications at Autoneum as of November 1, 2021. She succeeds the Corporate Communications Head, Dr. Anahid Rickmann, who will be leaving the company per end of August 2021.

Claudia Güntert studied Jurisprudence at the University of Basel, Switzerland, as well as German and Eastern European Literature at the Universities of Basel and Zurich, Switzerland.

From 2008 to 2013, she was Marketing & Product Communications Manager at Von Roll Management AG in Wädenswil, Switzerland. She thereby gained broad experience in marketing and customer communications in the industry and a deep understanding of the industrial relations between suppliers and their customers. From 2013 until 2021, she was Head of Corporate Communications & Investor Relations at Von Roll Holding AG in Wädenswil and Breitenbach, Switzerland. In this leading position, she expanded her expertise in internal and external communication with a focus on company vision and strategy, branding, global change management, and social media presence. Claudia Güntert will report to Matthias Holzammer, CEO.

Claudia Güntert has been appointed Head of Corporate Communications at Autoneum as of November 1, 2021. She succeeds the Corporate Communications Head, Dr. Anahid Rickmann, who will be leaving the company per end of August 2021.

Claudia Güntert studied Jurisprudence at the University of Basel, Switzerland, as well as German and Eastern European Literature at the Universities of Basel and Zurich, Switzerland.

From 2008 to 2013, she was Marketing & Product Communications Manager at Von Roll Management AG in Wädenswil, Switzerland. She thereby gained broad experience in marketing and customer communications in the industry and a deep understanding of the industrial relations between suppliers and their customers. From 2013 until 2021, she was Head of Corporate Communications & Investor Relations at Von Roll Holding AG in Wädenswil and Breitenbach, Switzerland. In this leading position, she expanded her expertise in internal and external communication with a focus on company vision and strategy, branding, global change management, and social media presence. Claudia Güntert will report to Matthias Holzammer, CEO.

Dr. Anahid Rickmann leaves Autoneum at the end of August at her own request. After almost nine years of service, she has decided to take on a new professional challenge. Anahid Rickmann strategically realigned the Company's communications after it became independent in 2011 and significantly shaped Autoneum's external perception and reputation. Her particular achievements include the measurable success of external communications, brand positioning and the launch of Autoneum's corporate responsibility strategy. CEO Matthias Holzammer and the Board of Directors would like to thank Anahid Rickmann sincerely for her successful, always dedicated and loyal service to Autoneum and wish her the best for her personal and professional future.

For September and October 2021, Luzia Schoeck, Communications Manager, will act as interim Head of Corporate Communications.

More information:
Autoneum Autoneum Management AG
Source:

Autoneum